WIDR33-ZT/N - NEWPORT ELECTRONICS

wiSeries Wireless DIN Rail Monitoring

and Control Device

The new NEWPORT wi®Series DIN Rail wireless monitoring

and control device is compatible with a large and growing

number of NEWPORT wireless sensors:

UWTC “Universal Wireless Thermocouple” Type J, K, T, E,

R, S, B, N, & C.

UWRTD “Universal Wireless RTD”.

zSeries wireless End Devices with sensors for Temperature,

Humidity & Barometric Pressure.

The wiSeries wiDR DIN Rail Monitor & Controller can monitor

up to eight (8) wireless sensors.

The compact instrument connects directly to an Ethernet

network and the Internet and features NEWPORT’s award-

winning embedded Web Server. It is easily configured and

monitored with a Web browser over the Ethernet network or

the Internet.

Alternatively, the wiDR DIN Rail Monitor &

Controller can instead be connected to the

USB port of a single computer with a “USB

Ethernet Adapter” that are inexpensive and

widely available.

wiSeries

Main Menu

CHART

(2 Seconds/Div)

1 Minute

1 Day

1 Week

1 Month

1 Year

C/Div

50 1200

300

100%

%/Div

hPa/Div

ChPa

Tue Feb 5 10:19:10 PDT 2008Tue Feb 5 10:18:10 PDT 2008

http://192.168.1.200

Min / Max Temp

48.0/21.0

P1 Process

P2 Sensor 2

P3 Process

P4 Process

P5 Process

P6 Process

P7 Process

P8 Sensor 8

A1 Ambient

A2 Sensor 2

A3 Ambient

A4 Ambient

A5 Ambient

A6 Ambient

A7 Ambient

A8 Sensor 8

Save Current Graph

UWTC

⻬⻬User-friendly, Simple to

Configure

⻬⻬Wireless Inputs:

Thermocouple, RTD,

Temperature + Humidity

+ Barometric Pressure

⻬⻬Embedded Ethernet

(standard)

⻬⻬2 Alarm Outputs: Solid

State Relays (SSR’s), dc

Pulse, Mechanical

Relays, Analog Voltage

& Current

⻬⻬Free Software

DIN Rail Monitor & Controller

zED-TH

395

wiDR

External

Temperature

Lug Mount

Probe

Industrial Probe

Temperature Humidity /

Barometric Pressure

External

Temperature

Stick Probe

MONITOR AND ALARM

The wiDR meter-controller comes standard with a

choice of either two Form C relays, or two SSR’s

(solid state relays) that can be used for control

functions or alarms. The wiDR meter can monitor

alarm conditions for any or all of the wireless

sensors. For example, the wiDR meter can be set

up to trip an alarm if any one of the sensors

indicated it was above or below a pre-set alarm

point.

MONITOR & CONTROL LOCALLY AND OVER

THE INTERNET

The new NEWPORT®wiSeries wireless monitoring

and control system provides local monitoring and

control, along with remote Web-based monitoring of

temperature from T/C’s, RTD’s, and semiconductor

sensors, as well as RH, and barometric pressure.

The wireless sensors transmit up to 1000m (3280’)*

--without obstructions or interference, to a wiSeries

monitor-controller connected directly to an Ethernet

network and the Internet. The wireless system

complies with IEEE 802.15.4 operating at 2.4 GHz.

* Distances for UWTC-1, UWRTD-1: up to 60m

(200 ft), UWTC-2, UWRTD-2: up to 120m (400 ft),

zED-*-P: up to 1000m (3280 ft), all distances are

without obstructions or interference.

The NEWPORT wiSeries system let’s you monitor

and record temperature, relative humidity, and

barometric pressure over an Ethernet network or the

Internet without any special software--just your Web

Browser.

WIRELESS SENSORS

NEWPORT offers a wide and growing selection of

wireless sensors for a variety of applications.

Depending on application, the wireless sensors are

(approx. AA size), or an external AC Adapter that

operates on any voltage worldwide from 100 to 240

VAC.

Wireless sensors are available with external probes

appropriate for an almost unlimited variety of

industrial and commercial applications.

ETHERNET

The wiDR is an independent node on the network

sending and receiving data in standard TCP/IP

packets. It is easily configured from a Web Browser

and can be password protected. From within an

Ethernet LAN or over the Internet, the user simply

types the IP address (such as 192.168.1.200) or an

easy to remember name (such as "Oven 5" or) and

the wiSeries meter serves a Web Page with the

current readings.

ALARM AND EMAIL

The wiDR monitor-controller can trigger an alarm if

variables go above or below a set point that you

determine. Your alarm can be sent by email to a

single user or to a group distribution list, including

text messages to cell phones and PDA’s. The

NEWPORT "Mail Notifier" software is a free and

easy program for this application.

The wiDR monitor-controllers operate on any AC

voltage worldwide from 100 to 240 Vac and 50 to

60Hz. The monitor-controller connects directly to an

Ethernet Network or the Internet. Unlike an RS232

or USB device, it does not require a host computer.

Channel 12

Please refer to local regulations for the allowed maximum transmit power

Transmit Power

Reset

PID 13106 (version x.x)

iSeries Firmware Version x.x

Input

Setpoints & On/Off

Alarm 2

Alarm 1

Passcode ID

Display

Permanent Store

Enable Standby Mode Before Configuring Unit

Scrolling

Main Menu

CONTROLLER SETUP

Setup

Transmit Power

Misc.

Monitor

CONTROLLER SETUP

http://192.168.1.200Address

Update

20dBm

End Device ID -

SPECIFICATIONS

Control Output 1 & 2

Relay: 250Vac or 30Vdc @ 3A (resistive load);

configurable for ON/OFF

Output 1:

SPDT type, can be configured as Alarm 1 output.

Output 2:

SPDT type, can be configured as Alarm 2 output

SSR:

20-265Vac @ 0.05 - 0.5A (resistive load); continuous

DC Pulse: Non-Isolated; 10 Vdc @ 20 mA

Alarm 1 & 2 (programmable)

Type: Same as Output 1 and 2

Operation: High/low, above/below, band,

latch/unlatch, normally open/normally closed and

process/deviation

Analog Output (programmable): Non-Isolated,

Retransmission 0 to 10Vdc or 0 to 20mA, 500Ω max

(Output 1 only). Accuracy is ± 1% of FS when

following conditions are satisfied.

1) Input is not scaled below 1% of Input FS.

2) Analog Out is not scaled below 3% of Output FS.

Network and Communications

Ethernet: Standard Compliance IEEE 802.3 10Base-T

Supported Protocols: TCP/IP, ARP, HTTPGET

Connection: Screw terminals

General

Dimensions:

93 H x 39 W x 125 mm D (3.64 x 1.55 x 4.93")

Operating Temperature:

0 to 55°C (32 to 131°F), 90% RH non-condensing

Line Voltage/Power: 90 - 240 Vac ±10%, 50 - 400

Hz*, 110 - 375 Vdc, equivalent voltage

* No CE compliance above 60 Hz

Low Voltage/Power Option:

24 Vac**, 20 - 36 Vdc. External power source must

meet Safety Agency Approvals

** Units can be powered safely with 24Vac power, but no

certification for CE are claimed

DIN Rail Monitor & Controller

Other outputs options are available, please contact our Sales Department.

For Low Power Option (

12-36Vdc, 24Vac)

add -DC

to end of part number: wiDR33-Z-DC $395 + 25 = $420.

To Order (Specify Model No.)

Model No. Price Description

wiDR33-U

$395 Wireless Meter/Controller for UWTC units with 2 Relays: Form “C” SPDT 3 A @ 120 Vac, 3 A @

240 Vac, Embedded Ethernet, 90-240 Vac/dc, 50-400 Hz

wiDR44-U

395 For UWTC units with Two Pulsed 10 Vdc @ 20 mA (for use with external SSR)

wiDR52-U

395 For UWTC units with Analog Output selectable as retransmission of process value;

0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR

wiDR53-U

395 For UWTC units with Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Form “C” Relay

wiDR22-Z

395 For zSeries units with Two Solid State Relays (SSR's): 0.5 A @ 120/240 Vac continuous

wiDR23-Z

395 For zSeries units with

SSR and

Form “C”

Relay

wiDR24-Z

395 For zSeries units with

SSR and

Pulsed 10 Vdc @ 20 mA (for use with external SSR)

wiDR54-Z

395 For zSeries units with Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Pulsed 10 Vdc @

20 mA (for use with external SSR) and SSR

EMBEDDED WEBSERVER

The NEWPORT wiSeries wireless sensor system is

easy to install, simple to operate, and features

NEWPORT’s award-winning iServer technology with

an Embedded Web Server that requires no special

software.

CHARTS AND GRAPHS

The NEWPORT wiDR monitor serves Active Web

Pages to display real time readings and charts of

temperature, humidity, and barometric pressure. You

can also log data in standard data formats for use in

a spreadsheet or data acquisition program such as

Excel or Visual Basic. NEWPORT offers a free and

easy to use program for logging data to Excel.

The virtual chart viewed on the web page is a

JAVA™ Applet that records a chart over the LAN or

Internet in real time. With the NEWPORT wiSeries

system there is no need to invest time and money

learning a proprietary software program to log or

chart the data.

Chart scales are fully adjustable on the fly. For

example, the chart can display one minute, one

hour, one day, one week, one month or one year.

Temperature and humidity can be charted across

the full span (-40 to 125°C, and 0 to 100% RH) or

within any narrow range such as (20 to 30°C).

wiSeries

Sensor 8

Sensor 1

ID: 1 Strength: 100%Sequence: 10 Success: 100% Battery: 3.78V Update: 5sec Running

ID: 8 Strength: 94%Sequence: 24 Success: 100% Battery: 3.67V Update: 5sec Running

Temperature Readings of up to 8 Sensors

QUALITY and TECHNOLOGY

Designed and manufactured in the USA, the

innovative NEWPORT®wiSeries of meters &

controllers features an extended one (1) YEAR

warranty at no extra charge.