REVISION M MODS-F-8P8C-X-XX-X-X-TH-X DESIGNED & DIMENSIONED IN MILLIMETERS TYPE -F POSITIONS/CONTACTS -8P8C: 8 POS/8 CON C1 DO NOT SCALE FROM THIS PRINT E & I OPTION -R: RoHS COMPLIANT PLATING -L: .000015" GOLD -S: .000030" GOLD -U: .000050" GOLD (SEE NOTE 4) THROUGH HOLE LED 2 -X: CODE (SEE TABLE 1, SHEET 2) (NOT AVAILABLE WITH -N) -N: NO LED (SEE FIGURE 1) LED 1 -X: CODE (SEE TABLE 1, SHEET 2) (NOT AVAILABLE WITH -N) -N: NO LED (SEE FIGURE 1) SHIELDED -S: NO PANEL GROUNDS -S4: PANEL GROUNDS ON TOP AND SIDE (SEE TABLE 2, SHEET 3 FOR SHIELD USED) (LEAVE BLANK FOR UNSHIELDED) 15.80 .622 15.00 .591 12.85 .506 13.10 .516 3.48 .137 2 MAX SWAY (TYP) 2.62 .103 0.25 .010 C4 5.08 .200 2 MAX TOE (TYP) FIG. 1 MODS-F-8P8C-X-N-N-TH-R 2.54 .100 1.78 .070 C2 C3 1.02 .040 NOTES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MM. TOLERANCES ARE: DECIMALS 1. C REPRESENTS A CRITICAL DIMENSION. 2. CRITICAL DIMENSIONS ON PCB LAYOUT APPLY TO THE ASSEMBLY. 3. LED FORWARD VOLATGE IS 2.3V (TYP), REVERSE VOLATAGE IS 5V. FORWARD DC IS 20mA. 4. PLATING APPLIES TO MATING AREA, GOLD FLASH ON TAILS, ALL PLATING OVER NICKEL UNDERPLATE. 5. PIN NUMBERS REFLECT PIN CALLOUT ON THE CONNECTOR, NOT USER SYSTEM WIRING ASSIGNMENT. c:\enterprisevault\DWG\MISC\MKTG\MODS-F-8P8C-X-XX-X-X-TH-X-MKT.SLDDRW .XX: .25 [.010] .XXX: .13 [.005] .XXXX: .05 [.002] MATERIAL: ANGLES 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: NYLON 46 SPRING WIRE: .35mm PHOS BRONZE SHIELD: .25 COPPER ALLOY, NICKEL PLATED MAX FLASH ALLOWED: .051 [.0020] MAX GATE VESTIGE: .051 [.0020] SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: RJ45 SIDE ENTRY PCB JACK WITH LED DWG. NO. MODS-F-8P8C-X-XX-X-X-TH-X BY: B. COOPER 5/9/2007 SHEET 1 OF 4 REVISION M 0.640.03 .025.001 15.80 .622 15.00 .591 12.85 .506 13.10 .516 3.48 .137 0.25 .010 C7 2 MAX SWAY (TYP) 2.62 .103 5.08 .200 2 MAX TOE (TYP) C8 FIG. 2 MODS-F-8P8C-X-X-X-TH-R 2.54 .100 C5 9.14 .360 1.78 .070 C9 1.02 .040 C6 2.29 .090 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 c:\enterprisevault\DWG\MISC\MKTG\MODS-F-8P8C-X-XX-X-X-TH-X-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: RJ45 SIDE ENTRY PCB JACK WITH LED DWG. NO. MODS-F-8P8C-X-XX-X-X-TH-X BY: B. COOPER 5/9/2007 SHEET 2 OF 4 REVISION M MODS-F-TH-04 0.350.30 .014.012 16.50 .650 15.75 .620 MODS-F-TH-01 13.50 .531 FIG. 3 MODS-F-8P8C-X-S-N-N-TH-R (ALL DIMS SAME AS FIG 6) C10 3.48 .137 MODS-F-TH-03 2.62 .103 0.25 .010 5.37 .211 2 MAX SWAY (TYP) 2 MAX TOE (TYP) FIG. 6 MODS-F-8P8C-X-S4-X-X-TH-R FIG. 4 MODS-F-8P8C-X-S-X-X-TH-R (ALL DIMS SAME AS FIG 6) MODS-F-TH-02 C12 1.78 .070 C11 1.02 .040 2 MAX SWAY (TYP) C13 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. FIG. 5 MODS-F-8P8C-X-S4-N-N-TH-R (ALL DIMS SAME AS FIG 6) DO NOT SCALE DRAWING SHEET SCALE: 2:1 c:\enterprisevault\DWG\MISC\MKTG\MODS-F-8P8C-X-XX-X-X-TH-X-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: RJ45 SIDE ENTRY PCB JACK WITH LED DWG. NO. MODS-F-8P8C-X-XX-X-X-TH-X BY: B. COOPER 5/9/2007 SHEET 3 OF 4 REVISION M 1.02 .040 0.51 .020 13.72 .540 2.29 .090 + - 0.90 .035 + 8 1.60 .063 0.90 .035 1.78 .070 2 9.14 .360 1 3.23 .127 1.02 .040 0.90 .035 8 1.60 .063 1 3.23 .127 2.54 .100 1.78 .070 2 2.54 .100 16.50 .650 16.50 .650 3.43 .135 12.70 .500 3.43 .135 12.70 .500 7.14 .281 7.14 .281 FIG. 8 PCB LAYOUT FOR MODS-F-8P8C-X-XX-N-N-TH-R FIG. 7 PCB LAYOUT FOR MODS-F-8P8C-X-XX-X-X-TH-R 1.02 .040 0.51 .020 1.02 .040 2.29 .090 13.72 .540 + - + 0.90 .035 - 0.90 .035 8 2 1.78 .070 0.90 .035 8 2 1.78 .070 3.23 .127 1 9.14 .360 1 3.23 .127 2.54 .100 2.54 .100 12.70 .500 7.14 .281 12.70 .500 FIG. 10 PCB LAYOUT FOR MODS-F-8P8C-X-N-N-TH-R 7.14 .281 FIG. 9 PCB LAYOUT FOR MODS-F-8P8C-X-X-X-TH-R PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 c:\enterprisevault\DWG\MISC\MKTG\MODS-F-8P8C-X-XX-X-X-TH-X-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: RJ45 SIDE ENTRY PCB JACK WITH LED DWG. NO. MODS-F-8P8C-X-XX-X-X-TH-X BY: B. COOPER 5/9/2007 SHEET 4 OF 4