PHOTO IC Photo IC for encoder S4506 Photo IC for photointerrupters with encoder functions S4506 incorporates a 4-element photodiode array that provides 2-phase digital output in response to the input light status. Photointerrupters with encoder functions can be easily configured by using S4506. Features Applications l 2-phase (phases A and B) digital output l Integrated with 4-element photodiode (pitch: 0.39 mm) l Direct TTL connection l Miniature plastic package l Encoders for office machine, robots, and NC machines Absolute maximum ratings (Ta=25 C) Parameter Symbol Value Supply voltage Vcc -0.5 to +7 Output current IO 20 Power dissipation *1 Po 250 Operating temperature Topr -30 to +80 Storage temperature Tstg -40 to +85 Soldering 230 C, 5 s, at least 1.8 mm away from package surface *1: Derate power dissipation at a rate of 3.3 mW/C above Ta=25 C Unit V mA mW C C - Electrical and optical characteristics (Ta =25 C, Vcc=5 V, unless otherwise noted) Parameter Supply voltage Low level output voltage High level output voltage Current consumption Peak sensitivity wavelength Slit movement speed Duty ratio *4 Symbol Vcc VOL VOH ICCL ICCH p Vp DA DB Condition IOL=8 mA IOH=0 mA VOA=VOB= "L" VOA=VOB= "H" Ev=200 lx *2 *3 Ev=200 lx *2 f=2.5 kHz Min. 4.5 4.5 - Typ. 0.1 6 3 870 - Max. 5.5 0.4 12 12 10,000 Unit V V V mA mA nm slit/s 35 50 65 % Transfer Phase f=2.5 kHz, Ev=200~700 lx *2 60 90 120 deg AB characteristics difference Threshold lx EVD "A" light source, f=2.5 kHz 30 120 illuminance *5 *2: Ev is illuminance emitted from a CIE standard "A" light source (tungsten lamp). *3: A collimated light source and a recommended slit moving at a constant speed are used. [Delay time between the instant that the slit passes through the output transition position and the actual output transition should be less than 1/8 of the slit cycle.] *4: See next page. *5: Minimum illuminance from an "A" light source when the duty ratio of phases A and B is between 35 and 65 %. 1 Photo IC for encoder Block diagram Dimensional outline (unit: mm) CONSTANT VOLTAGE CIRCUIT I3 P1 S4506 5.0 CENTER OF ACTIVE AREA 2.5 0.2 VOA + I1 5.2 0.3 (INCLUDING BURR) Vcc 2.0 1.0 PD 3 1.0 (DEPTH 0.15 MAX.) 0.55 + (0.8) P4 0.45 I2 GND PD 4 PHOTODIODE 5 VOB 2.0 (DEPTH 0.15 MAX.) 10 P3 (1.0) I4 16.5 1.0 PD 2 5.0 2.5 0.2 5.2 0.3 (INCLUDING BURR) - PD 1 P2 PRE-AMPLIFIER HYSTERESIS OUTPUT CIRCUIT COMPARATOR (1.27) (1.27) (1.27) OUTPUT P1 < P3 P1 < P3 P1 > P3 P1 > P3 P2 > P4 P2 < P4 P2 > P4 P2 < P4 VOA L L H H 0.25 +0.15 -0.1 (SPECIFIED AT THE LEAD ROOT) VOB L H L H 0.7 0.15 INPUT 10 PHOTOSENSITIVE SURFACE VOA Vcc GND VOB KPICC0012EC Tolerance unless otherwise noted: 0.1, 2 Shaded area indicates burr. Values in parentheses are not guaranteed, but for reference 5 KPICA0016EB Details of photodiodes (unit: mm) Operation timing diagram Outputs VOA and VOB change as shown when the slit is moved to the right at a constant speed from the position shown on the left figure. 1.56 0.78 0.31 tAP PD 3 PD 2 0.41 PD 1 tAH PD 4 VOA 0.39 "H" PHASE DIFFERENCE PHASE A=360 AB RECOMMENDED SLIT HOLE * * Recommended slit holes for uniform collimated light KPICC0013ED PHASE B=360 Recommended slit (unit: mm) 1.56 DUTY RATIO DA = tAH x 100 tAP SLIT VOB "L" DUTY RATIO DB = tBH x 100 tBP tBH Position on left figure tBP ACTIVE AREA KPICC0015EC 0.78 LIGHT SOURCE: COLLIMATED LIGHT LED KPICC0014EB Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. (c)2001 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, http://www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvagen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 2 Cat. No. KPIC1004E02 Aug. 2001 DN