Regarding the change of names mentioned in the document, such as Hitachi
Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand
names are mentioned in the document, these names have in fact all been changed to Renesas
Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and
corporate statement, no changes whatsoever have been made to the contents of the document, and
these changes do not constitute any alteration to the contents of the document itself.
Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003
To all our customers
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better
and more reliable, but th ere is always the possibility that trouble may occur with them. Trouble with
semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate
measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or
(iii) prevention against any malfunction or mishap.
Notes regar ding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas
Technology Corporation product best suited to the customer's application; they do not convey any
license under any intellectual property rights, or any other rights, belonging to Renesas Technology
Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any
third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or
circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Renesas Technology Corporation without notice due to product improvements or
other reasons. It is therefore recommended that customers contact Renesas Technology Corporation
or an authorized Renesas Technology Corporation product distributor for the latest product information
before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss
rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by various
means, including the Renesas Technology Corporation Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, please be sure to evaluate all information as a total system before
making a final decision on the applicability of the information and products. Renesas Technology
Corpo r ation assumes no respon sibility for any damage, liability or other loss resulting from the
information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device
or system that is used under circumstances in which human life is potentially at stake. Please contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor
when considering the use of a product contained herein for any specific purposes, such as apparatus or
systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in
whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be
exported under a license from the Japanese government and cannot be imported into a country other
than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the products
contained therein.
HD74HC160/HD74HC161/
HD74HC162/HD74HC163
Synchronous Decade Counter (Direct Clear)
Synchronous 4-bit Binary Counter (Direct Clear)
Synchronous Decade Counter (Synchronous Clear)
Synchronous 4-bit Binary Counter (Synchronous Clear)
ADE-205-455 (Z)
1st. Edition
Sep. 2000
Description
The HD74HC160 and the HD74HC162 are 4 bit decade counters, and the HD74HC161 and the
HD74HC163 are 4 bit binary counters All flip-flops are clocked simultaneously on the low to high to
transition (positive edge) of the clock input waveform.
These counters may be preset using the load input. Presetting of all four flip-flops is synchronous to thte
rising edge of clock. When load is held low counting is disabled and the data on the A, B, C, and D inputs
is loaded into the counter on the rising edge of clock. If the load input is taken high before the positive
edge of clock the count operation will be unaffected.
All of these counters may be cleared by utilizing the clear input. The clear function on the HD74HC162
and HD74HC163 counters are synchronous to the clock. That is, the counters are cleared on the positive
edge of clock while the clear input is held low.
The HD74HC160 and HD74HC161 counters are cleared asynchronously. When the clear is taken low the
counter is cleared immediately regardless of the clock.
Two active high enable inputs Enable P and Enable T and a ripple carry output are provided to enable easy
cascading of counters. Both enable inputs must be high to count. The Enable T input also enables the
Ripple Carry output. When enabled, the Ripple Carry outputs a positive pulse when the counter overflows.
This pulse is approximately equal in duration to the high level portion of the QA outputs. The Ripple Carry
output is fed to successive cascaded stages to facilitate easy implementation of N-bit counters.
Features
• High Speed Operation: tpd (Clock to Q) = 18 ns typ (CL = 50 pF)
• High Output Current: Fanout of 10 LSTTL Loads
• Wide Operating Voltage: VCC = 2 to 6 V
• Low Input Current: 1 µA max
• Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C)
HD74HC160/HD74HC161/HD74HC162/HD74HC163
2
Pin Arrangement
1
2
3
4
5
6
7
8
Clear
Clock
A
B
C
D
Enable P
GND
VCC
QA
QB
QC
QD
Enable T
Load
16
15
14
13
12
11
10
9
(Top view)
CK
P
A
C
D
B
Ripple
Carry Ripple
Carry Output
Outputs
Data
Inputs
QA
QB
QD
T
QC
CLR
Load
Function Table
Inputs Outputs
Clock Clear*1Load Enable P Enable T Qn
L X X X Reset-clear
H L X X Load input data
H H H H Count
H H L X No count
H H X L No count
Note: 1. 162 and 163 Only-160 and 161 are Asynchronous Clear Devices
Decade Counter Binary Counter
Asynchronous clear HD74HC160 HD74HC161
Synchronous clear HD74HC162 HD74HC163
HD74HC160/HD74HC161/HD74HC162/HD74HC163
3
DC Characteristics
Ta = 25°CTa = –40 to
+85°C
Item Symbol VCC (V) Min Typ Max Min Max Unit Test Conditions
Input voltage VIH 2.0 1.5 — — 1.5 — V
4.5 3.15 — — 3.15 —
6.0 4.2 — — 4.2 —
VIL 2.0 — — 0.5 — 0.5 V
4.5 — — 1.35 — 1.35
6.0 — — 1.8 — 1.8
Output voltage VOH 2.0 1.9 2.0 — 1.9 — V Vin = VIH or VIL IOH = –20 µA
4.5 4.4 4.5 — 4.4 —
6.0 5.9 6.0 — 5.9 —
4.5 4.18 — — 4.13 — IOH = –4 mA
6.0 5.68 — — 5.63 — IOH = –5.2 mA
VOL 2.0 — 0.0 0.1 — 0.1 V Vin = VIH or VIL IOL = 20 µA
4.5 — 0.0 0.1 — 0.1
6.0 — 0.0 0.1 — 0.1
4.5 — — 0.26 — 0.33 IOL = 4 mA
6.0 — — 0.26 — 0.33 IOL = 5.2 mA
Input current Iin 6.0 — — ±0.1 — ±1.0 µA Vin = VCC or GND
Quiescent supply
current ICC 6.0 — — 4.0 — 40 µA Vin = VCC or GND, Iout = 0 µA
HD74HC160/HD74HC161/HD74HC162/HD74HC163
4
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25°CTa = –40 to
+85°C
Item Symbol VCC (V) Min Typ Max Min Max Unit Test Conditions
Maximum clock fmax 2.0 — — 5 — 4 MHz
frequency 4.5 — — 25 — 20
6.0 — — 29 — 23
Propagation delay tPLH 2.0 — — 160 — 200 ns Clock to Q
time tPHL 4.5 — 18 32 — 40
6.0 — — 27 — 34
2.0 — — 225 — 280 ns Clear to Q
4.5 — 23 45 — 56 (HC160, HC161 only)
6.0 — — 38 — 48
2.0 — — 150 — 190 ns Enable T to Ripple Carry output
4.5 — 15 30 — 38
6.0 — — 26 — 33
2.0 — — 200 — 250 ns Clock to Ripple carry output
4.5 — 16 40 — 50
6.0 — — 34 — 43
Setup time tsu 2.0 125 — — 156 — ns Data to Clock
4.5 25 9 — 31 —
6.0 21 — — 26 —
2.0 125 — — 156 — Load to Clock
4.5 25 15 — 31 —
6.0 21 — — 26 —
2.0 125 — — 156 — Clear to Clock
4.5 25 — — 31 — (HC162, HC163 only)
6.0 21 — — 26 —
Hold time th2.0 0 — — 0 — ns
4.5 0 –7 — 0 —
6.0 0 — — 0 —
Removal time trem 2.0 100 — — 125 — ns
4.5 20 7 — 25 —
6.0 17 — — 21 —
HD74HC160/HD74HC161/HD74HC162/HD74HC163
5
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) (cont)
Ta = 25°CTa = –40 to
+85°C
Item Symbol VCC (V) Min Typ Max Min Max Unit Test Conditions
Pulse width tw2.0 80 — — 100 — ns
4.5 16 6 — 20 —
6.0 14 — — 17 —
Output rise/fall tTLH 2.0 — — 75 — 95 ns
time tTHL 4.5 — 5 15 — 19
6.0 — — 13 — 16
Input capacitance Cin — — 5 10 — 10 pF
Function Table
Count Enable/Disable
Control Inputs Result at Outputs
Load Enable P Enable T QA to QDRipple Carry Output
H H H Count High when QA to QD are maximum
L H H No count
X L H No count High when QA to QD are maximum
X H L No count L
X L L No count L
HD74HC160/HD74HC161/HD74HC162/HD74HC163
6
Timing Diagram
HD74HC160/HD74HC162
Sequence illustrated in waveforms.
1. Clear outputs to zero.
2. Preset to BCD seven.
3. Count to eight, nine, zero, one, two and three.
4. Inhibit
(Asynchronous)Clear(HC160)
Clear(HC162)
Clock(HC160)
Ripple
Carry
Output
Clear Load Count
0987321
Inhibit
Clock(HC162)
Enable P
Enable T
Load
Data
Inputs
Count
Enables
Outputs
A
B
C
D
QA
QB
QC
QD
(Synchronous)
HD74HC160/HD74HC161/HD74HC162/HD74HC163
7
HD74HC161/HD74HC163
Sequence illustrated in waveforms.
1. Clear outputs to zero.
2. Preset to binary twelve.
3. Count to thirteen, fourteen, fifteen, zero, one and two.
4. Inhibit
(Asynchronous)Clear(HC161)
Clear(HC163)
Clock(HC161)
Ripple
Carry
Output
Clear Load Count
15141312 210
Inhibit
Clock(HC163)
Enable P
Enable T
Load
Data
Inputs
Count
Enables
Outputs
A
B
C
D
QA
QB
QC
QD
(Synchronous)
HD74HC160/HD74HC161/HD74HC162/HD74HC163
8
Logic Diagram
HD74HC160
Decade Counter with Asynchronous Clear
T1QA
QA
QA
QB
QC
QD
Ripple
Carry
Output
CLR
C
Load
Load
Load
Clock
Clear
Enable T
Enable P
D
C
B
A
C
P1
CLR
C
C
Load
Load
T2QB
QB
P2
CLR
C
C
Load
Load
T3
VCC
QC
QC
P3
CLR
C
C
Load
Load
T4QD
QD
P4
CLR
C
C
Load
Load
HD74HC160/HD74HC161/HD74HC162/HD74HC163
9
HD74HC161
4-bit Binary Counter with Asynchronous Clear
T1QA
QA
QA
QB
QC
QD
Ripple
Carry
Output
CLR
C
Load
Load
Load
Clock
Clear
Enable T
Enable P
D
C
B
A
C
P1
CLR
C
C
Load
Load
T2QB
QB
P2
CLR
C
C
Load
Load
T3QC
QC
P3
CLR
C
C
Load
Load
T4QD
QD
P4
CLR
C
C
Load
Load
HD74HC160/HD74HC161/HD74HC162/HD74HC163
10
HD74HC162
Decade Counter with Synchronous Clear
CK
QA
QB
QC
QD
RCO
CK
A
B
C
D
P
T
VCC
LD
CLR
CK
LD
LD
LD·CLR
LD·CLR
CLR
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
HD74HC160/HD74HC161/HD74HC162/HD74HC163
11
HD74HC163
4-bit Binary Counter with Synchronous Clear
CK
QA
QB
QC
QD
RCO
CK
A
B
C
D
P
T
LD
CLR
CK
LD
LD
LD·CLR
LD·CLR
CLR
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
Q
Q
T
CK
CK
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
Q
Q
T
CR
CR
LD
LD
LD·CLR
LD·CLR
CLR
IN
CLR
HD74HC160/HD74HC161/HD74HC162/HD74HC163
12
Package Dimensions
Hitachi Code
JEDEC
EIAJ
Mass
(reference value)
DP-16
Conforms
Conforms
1.07 g
Unit: mm
6.30
19.20
16 9
81 1.3
20.00 Max
7.40 Max
7.62
0.25
+ 0.13
– 0.05
2.54 ± 0.25 0.48 ± 0.10
0.51 Min
2.54 Min 5.06 Max
0° – 15°
1.11 Max
Hitachi Code
JEDEC
EIAJ
Mass
(reference value)
FP-16DA
—
Conforms
0.24 g
Unit: mm
*Dimension including the plating thickness
Base material dimension
*0.22 ± 0.05
*0.42 ± 0.08
0.12
0.15
M
2.20 Max 5.5
10.06
0.80 Max
16 9
18
10.5 Max
+ 0.20
– 0.30
7.80
0.70 ± 0.20
0° – 8°
0.10 ± 0.10
1.15
1.27
0.40 ± 0.06
0.20 ± 0.04
HD74HC160/HD74HC161/HD74HC162/HD74HC163
13
Hitachi Code
JEDEC
EIAJ
Mass
(reference value)
FP-16DN
Conforms
Conforms
0.15 g
Unit: mm
*Dimension including the plating thickness
Base material dimension
1.27
16 9
18
0.15
0.25
M
1.75 Max 3.95
*0.22 ± 0.03
9.9
0° – 8°
10.3 Max
+ 0.10
– 0.30
6.10
+ 0.67
– 0.20
0.60
+ 0.11
– 0.04
0.14
*0.42 ± 0.08
0.635 Max
0.40 ± 0.06
0.20 ± 0.03
1.08
Hitachi Code
JEDEC
EIAJ
Mass
(reference value)
TTP-16DA
—
—
0.05 g
Unit: mm
*Dimension including the plating thickness
Base material dimension
0.50 ± 0.10
0° – 8°
*0.17 ± 0.05
6.40 ± 0.20
0.10
1.10 Max
0.13 M
0.65
18
16 9
4.40
5.00
5.30 Max
0.07
+0.03
–0.04
0.65 Max
1.0
0.20 ± 0.06
+ 0.08
– 0.07
*0.22
0.15 ± 0.04
HD74HC160/HD74HC161/HD74HC162/HD74HC163
14
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,
copyright, trademark, or other intellectual property rights for information contained in this document.
Hitachi bears no responsibility for problems that may arise with third party’s rights, including
intellectual property rights, in connection with use of the information contained in this document.
2. Products and product specifications may be subject to change without notice. Confirm that you have
received the latest product standards or specifications before final design, purchase or use.
3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,
contact Hitachi’s sales office before using the product in an application that demands especially high
quality and reliability or where its failure or malfunction may directly threaten human life or cause risk
of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,
traffic, safety equipment or medical equipment for life support.
4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly
for maximum rating, operating supply voltage range, heat radiation characteristics, installation
conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used
beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable
failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-
safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other
consequential damage due to operation of the Hitachi product.
5. This product is not designed to be radiation resistant.
6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without
written approval from Hitachi.
7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor
products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
Copyright Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Hitachi Asia Ltd.
Hitachi Tower
16 Collyer Quay #20-00,
Singapore 049318
Tel : <65>-538-6533/538-8577
Fax : <65>-538-6933/538-3877
URL : http://www.hitachi.com.sg
URL NorthAmerica : http://semiconductor.hitachi.com/
Europe : http://www.hitachi-eu.com/hel/ecg
Asia : http://sicapac.hitachi-asia.com
Japan : http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd.
(Taipei Branch Office)
4/F, No. 167, Tun Hwa North Road,
Hung-Kuo Building,
Taipei (105), Taiwan
Tel : <886>-(2)-2718-3666
Fax : <886>-(2)-2718-8180
Telex : 23222 HAS-TP
URL : http://www.hitachi.com.tw
Hitachi Asia (Hong Kong) Ltd.
Group III (Electronic Components)
7/F., North Tower,
World Finance Centre,
Harbour City, Canton Road
Tsim Sha Tsui, Kowloon,
Hong Kong
Tel : <852>-(2)-735-9218
Fax : <852>-(2)-730-0281
URL : http://www.hitachi.com.hk
Hitachi Europe Ltd.
Electronic Components Group.
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire SL6 8YA, United Kingdom
Tel: <44> (1628) 585000
Fax: <44> (1628) 585160
Hitachi Europe GmbH
Electronic Components Group
Dornacher Straβe 3
D-85622 Feldkirchen, Munich
Germany
Tel: <49> (89) 9 9180-0
Fax: <49> (89) 9 29 30 00
Hitachi Semiconductor
(America) Inc.
179 East Tasman Drive,
San Jose,CA 95134
Tel: <1> (408) 433-1990
Fax: <1>(408) 433-0223
For further information write to:
Colophon 2.0
