PSI-GPRS/GSM-MODEM/RS232-QB GPRS Modem INTERFACE Data Sheet 103144_01_en (c) PHOENIX CONTACT - 02/2007 Description The DIN rail-mountable PSI-GPRS/GSM-MODEM/ RS232-QB GPRS modem is specifically designed to meet industrial requirements for remote monitoring and alarm generation. It provides global access to machines and systems via GSM connections. A wide range of security functions, such as adjustable selective call acceptance, connection establishment with password protection, and call back function, protect the system against unauthorized access. The modem also features an integrated automatic "Sleep" function to increase battery life and a wide supply voltage range of 10 V to 30 V, making it suitable for universal use. Modem startup is very easy using plug and play and user-friendly configuration software. The modem is approved for operation in 850 MHz, 900 MHz, 1800 MHz, and 1900 MHz GSM networks. The integrated TCP/IP stack even allows the implementation of simple control systems into the GPRS network. One particularly useful feature for remote system monitoring are the configurable warning or alarm inputs. If these inputs are activated, the modem calls user-defined numbers and sends stored text messages by fax and/or SMS. Using the switching output additional functions can be controlled via SMS messages. To ensure error-free operation even in harsh EMC conditions, the device has high-quality 3-way isolation and integrated surge protection. The PSI-GPRS/GSM-MODEM/RS232-QB is designed exclusively for SELV operation according to IEC 60950/EN 60950/VDE 0805. The modem may only be connected to devices, which meet the requirements of EN 60950 ("Safety of Information Technology Devices"). Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. PSI-GPRS/GSM-MODEM/RS232-QB Ordering Data Modem Description GPRS modem, DIN rail-mountable, GSM + GPRS, 850 MHz/900 MHz/ 1800 MHz/1900 MHz, V.24 (RS-232) interface, alarm input and output, supply voltage 10 V DC ... 30 V DC Type Order No. Pcs./Pkt PSI-GPRS/GSM-MODEM/RS232-QB 2313106 1 Scope of supply: Modem, CD with configuration software, and user manual Accessories Description GSM dual band antenna with omni-directional characteristics, Antenna cable with SMA circular connector Degree of protection Dimensions 2m IP65 76 mm x 20 mm System power supply, primary switched Input voltage range Nominal output voltage Nominal output current 45 Hz ... 65 Hz 85 V AC ... 264 V AC 24 V DC 1% 1.5 A DIN rail connector (3 required) V.24 (RS-232) cable, 2 m, to connect the modem to a 9-pos. device interface 9-pos. D-SUB/ 9-pos. D-SUB (female/female) Type Order No. Pcs./Pkt PSI-GSM-900/1800-ANT 2708902 1 MINI-SYS-PS-100-240AC/24DC/1.5 2866983 1 ME 17,5 TBUS 1,5/ 5-ST-3,81 GN 2709561 1 PSM-KA9SUB9/BB/2METER 2799474 1 Technical Data Power Supply Supply voltage 10 V DC ... 30 V DC via COMBICON plug-in screw terminal block Frequency DC Current consumption Nominal operation < 100 mA at 24 V Sleep mode (can be configured via software) < 60 mA at 24 V LED indicators VCC (green LED): Steady light: Operation V.24 (RS-232) Interface Connection 9-pos. D-SUB pin strip Device type Data Communication Equipment (DCE) Data format Serial asynchronous UART/NRZ Encoding 7/8 data, 1/2 stop, 1 parity, 10/11-bit character length Serial transmission speed Automatic transmission speed detection (default) or fixed setting at 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (adjustable via software) Data flow control Software handshake: Xon/Xoff Hardware handshake: RTS/CTS No handshake or 3964R LED indicator/data indicator TD (yellow LED), data to modem (dynamic) RD (green LED), data from modem (dynamic) LED indicator/control signal indicator DTR (yellow LED), Data Terminal Ready DCD (yellow LED), Data Carrier Detect 103144_01_en PHOENIX CONTACT 2 PSI-GPRS/GSM-MODEM/RS232-QB GSM Frequencies 850 MHz, 900 MHz, 1800 MHz, 1900 MHz (EGSM) Transmission power 2 W at 850 MHz and 900 MHz 1 W at 1800 MHz and 1900 MHz SIM interface 3 V SIM card Transmission speed Automatic adjustment DCE/DCE 300 baud ... 14.4 kbaud Fax 2400 baud ... 14.4 kbaud GPRS 300 kbps ... 85.6 kbps Compatibility V.34, V.32, V.22bis, V.110 GPRS compatibility GPRS Class 10, Class B Encoding scheme: CS1 ... CS4 4 time slots for receiving data 2 time slots for transmitting data Command set compatibility AT standard command set and extended V.250 basic command set Antenna connection 50 impedance SMA antenna female connector Data indicator OH (green LED), logged into the GSM network - Flashing: Off the hook SIM (red LED) - Steady light: No SIM card present - Flashing: No PIN code entered - OFF: SIM card present and PIN code entered NET (yellow LED) - Steady light: Very good network reception - Flashing: Good network reception - Flashing quickly: Moderate network reception - OFF: No network reception Startup diagnostics Selftest, visualization via LEDs (controller, RAM, EPROM, GSM engine, antenna, EEPROM) Network function The PIN code is saved in the modem. After a voltage interrupt, the modem automatically relogs into the network and logs automatically into the GPRS network. Network check Network bar graph in the configuration software Switching Inputs and Outputs Switching inputs 2 x UN 24 V DC/5 mA, input voltage range 9 V DC ... 48 V DC, floating, activate one or more of the following: - Message to the local V-24 (RS-232) interface - SMS - Fax - Output control at the opposite station (via SMS) Switching output Transistor output to the backplane, activated by: - Input control at the opposite station - SMS - Local AT command Signaling ALR (red LED) - Flashing: SMS/FAX error message to be sent - Steady light: Alarm has been triggered Text and Telephone Number Memory Text memory SMS 160 characters Fax 160 characters Telephone number memory 103144_01_en 10 telephone numbers with a maximum of 36 digits PHOENIX CONTACT 3 PSI-GPRS/GSM-MODEM/RS232-QB General Data CE conformance According to R&TTE directive 1999/5/EC Ambient operating temperature range -25C ... +60C Housing ME 35 with 5-pos. bus contact and ground contact Material ABS-V0, green Dimensions (H x W x D) 99 x 35 x 114.5 mm Weight of device 209 g Functional earth ground Housing contact with DIN rail Vibration resistance According to EN 60068-2-6 5g, 1.5 h in each x, y, and z direction Shock test According to EN 60068-2-27 Operation 15g, 11 ms, half-sine shock pulse Storage 30g, 11 ms, half-sine shock pulse Free fall According to IEC 60068-2-32 from a height of 1 m (without packaging) Degree of protection IP20 Separate ground levels Power supply // V.24 (RS-232) Test voltage 1.5 kV AC, 50 Hz, 1 min. between all ground levels according to DIN EN 61010-1/VDE 0411-1 and DIN EN 60950 Electromagnetic Compatibility Noise Immunity According to EN 61000-6-2 Electrostatic discharge (ESD) EN 61000-4-2 Criterion B 8 kV air discharge 6 kV contact discharge Electromagnetic HF field EN 61000-4-3 Amplitude modulation Pulse modulation Fast transients (burst) Criterion A 10 V/m 10 V/m EN 61000-4-4 Signal Criterion A 1 kV/5 kHz Power supply Criterion A 1 kV/5 kHz Criterion B 2 kV/ 5 kHz Surge current load EN 61000-4-5 Signal Criterion B 1 kV Power supply 2 kV Conducted interference EN 61000-4-6 Criterion A Noise emission EN 55022 + A1 + A2 Limiting curve B EN 61000-6-2 Generic standard for the industrial sector 10 V Conformance According to R&TTE Directive 1999/5/EC EMC Immunity to interference (electromagnetic compatibility) Safety Protection of personnel with regard to electrical safety EN 60950 Health Limitation of exposure of the population to electromagnetic fields EC Gazette 1999/519/EC EC Council recommendation of July 12, 1999 Radio Effective use of the frequency spectrum and prevention of radio interference EN 301511 103144_01_en PHOENIX CONTACT 4 PSI-GPRS/GSM-MODEM/RS232-QB Features - - - - - - - - - - - - - - GSM (Global System for Mobile Communication) and GPRS (General Packet Radio Service) Quad band (850 MHz/900 MHz/1800 MHz/1900 MHz) Password-protected access/call-back function/selective call acceptance Integrated TCP/IP stack Virtual permanent line via GPRS Configurable input and output Alarm sent directly by SMS, e-mail or fax via the integrated switching input (or via AT commands) Sends, receives, and evaluates SMS messages Wide supply voltage range of 10 V DC to 30 V DC Temperature range of -25C to +60C High-quality electrical isolation (VCC // RS-232) Integrated surge protection Easy startup using plug and play and user-friendly configuration software 3964R compatible (c) PHOENIX CONTACT 02/2007 103144_01_en PHOENIX CONTACT GmbH & Co. KG * 32823 Blomberg * Germany Phone: +49-(0) 5235-3-00 * Fax: +49-(0) 5235-3-4 12 00 www.phoenixcontact.com 5