Catalog 1308242 Issued 3-03 (PDF Revised 9-12) P&B 600 series 15 Amp Sensitive PC Board Relay File E55708 File LR48569 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features * * * * * Initial Dielectric Strength Low power sensitive coil. 1 Form A, 1 Form B and 1 Form C contact arrangements. Various contact materials and types for ratings to 15 amps. Coil assembly rated 130C, 94V-O. Applications include sensor and timer controls, emergency lighting, instrmentation, alarm systems, smoke and fire detectors, business equipment and vending machines. Between Open Contacts: 500VAC, 60 Hz., 2 seconds. Between Coil and Contacts: 1,000VAC, 60 Hz., 2 seconds. Coil Data @ 25C Contact Data Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C (SPDT). Material and Type: Gold-silver crossbar, silver-cadmium crossbar, palladium crossbar, gold-flashed silver cadmium, silver sadmium oxide, find silver, gold-flashed coin silver. Expected Mechanical Life: 10 million operations, minimum. Expected Electrical Life: 100,000 operations, minimum, at rated load. UL/CSA Ratings @ 25C Code Contact Material B Au Flashed AgCd Coil Data @ 25C Rating 75VA@24VAC Pilot Duty 1A@120VAC General Purpose 1.5A@50VDC Resistive 600W@277VAC Gen'l. Purpose SPST-NO Only 240W@277VAC Gen'l. Purpose SPST-NC Only 480VA@277VAC Pilot Duty SPDT Only 480VA@Ballast SPDT Only 1/10 HP@120VAC G Au Ag 3A@28VDC Resistive 125VA@120VAC Pilot Duty 1/8 HP@120/240 VAC H AgCdO 15A@150VAC Inductive 0.4 PF NO Only 10A@277VAC Resistive 15A@28VDC Resistive TV5@NO Contacts TV2@NC Contacts 600W@277VAC Tungsten SPDT-NO Only 240W@277VAC Tungsten SPDT-NC Only 480VA@277VAC Pilot Duty SPDT Only 480VA@277VAC Ballast SPDT Only 1/3 HP@120/240VAC NO 1/6 HP@120/240VAC NC K Au Flashed Coin Ag 5A@240VAC Resistive 5A@28VDC 125VA@240VAC Pilot Duty 125VA@125VAC Pilot Duty R Fine Ag 15A@150VAC Resistive 15A@28VDC Resistive 10A@277VAC Resistive 480VA@240VAC Pilot Duty TV2@NC Contacts TV4@NO Contacts 480W@120VAC Tungsten NO 240W@120VAC Tungsten NC S Ag Cd 3A@240VAC Resistive 3A@28VDC Resistive V Palladium 2A@28VDC Resistive Only when Code Y Electrical Spacing is specified. Dimensions are shown for reference purposes only. Rated Voltage: 3 to 48VDC. Maximum Voltage @ 85C: 120% of Rated Voltage. Nominal Power @ 25C: 110mW for 3A and 5A rated models; 240mW for 15A rated models. Maximum Power @ 25C: 1W. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25C, 500VDC and 50% rel. humidity. Dimensions are in inches over (millimeters) unless otherwise specified. Nominal Voltage VDC 3 6 9 12 18 24 28 48 DC Resistance in Ohms 10% 3 A & 5A Types 82 327 736 1,309 2,945 5,236 7,127 20,945 15A Types 38 150 338 600 1,350 2,400 3,267 9,600 Must Operate Voltage VDC 2.25 4.5 6.75 9.0 13.5 18.0 21.0 36.0 Must Release Voltage VDC 0.3 0.6 0.9 1.2 1.8 2.4 2.8 4.8 Operate Data @ 25C Must Operate Voltage: 75% of nominal. Must Release Voltage: 10% of nominal. Operate Time: 10 ms, typ. Release Time: 10 ms, typ. Environmental Data Temperature Range: Storage: -55C to +85C. Operating: -55C to +85C. Mechanical Data Termination: Printed circuit terminals. Enclosures: Unsealed dust cover or sealed plastic case. Weight: 1.6 oz. (45g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 497 Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Revised 9-12) P&B Ordering Information Typical Part Number > 60 3 - 24 V Y Q 1. Basic Series Type: 60 = Miniature, PC board relay rated 3A or 5A (Contact Material Code G, S, V or B only) 61 = Miniature, PC board relay rated 15A (Contact Material Code H or R only) 65 = Miniature, PC board relay rated 5A (Contact Material Code K only) 2. Contact Arrangement: 1 = 1 Form A (SPST-NO) 3. Coil Voltage: 3 = 3VDC 6 = 6VDC 2 = 1 Form B (SPST-NC) 9 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 3 = 1 Form C (SPDT) 28 = 28VDC 48 = 48VDC 4. Contact Material: G = Au Ag crossbar, rated 3A (Only available with Basic Series Type 60). S = Au Cd crossbar, rated 3A (Only available with Basic Series Type 60). V = Pd crossbar, rated 3A (Only available with Basic Series Type 60). B = Au-flashed AgCd crossbar, rated 5A (Only available with Basic Series Type 60). H = AgCdO, rated 15A (Only available with Basic Series Type 61). R = Fine Ag, rated 15A (Only available with Basic Series Type 61). K = Au-flashed coin Ag, rated 5A (Only available with Basic Series Type 65). 5. Electrical Spacing: Leave Blank = 0.125 in (3.175 mm) Clearance and 0.125 in (3.175 mm) Creepage Y = 0.125 in (3.175 mm) Clearance and 0.250 in (6.35 mm) Creepage 6. Enclosure Type Leave Blank = Unsealed dust cover Q = Sealed cover Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. PC Board Layout (Bottom View) Outline Dimensions .775 MAX. (19.69) 1.250 MAX. (31.75) .273 (6.93) .546 (13.9) .067 DIA. TYP. (1.70) .313 (7.95) 1.200 MAX. (30.48) .843 (21.4) .240 (6.1) .297 (7.54) .594 (15.1) Note: On single throw models, only necessary terminals are present. Wiring Diagrams (Bottom Views) Disclaimer While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. 1 Form A (SPST-NO) 1 Form B (SPST-NC) 1 Form C (SPDT) TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. (c) 2012 Tyco Electronics Corporation a TE Connectivity Ltd. company TE Connectivity (logo) and TE Connectivity are trademarks of the TE Connectivity group of companies and its licensors. Other logos, product or company names may be trademarks of their respective owners. Dimensions are shown for 498 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Note: On single throw models, only necessary terminals are present. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.