497
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03 (PDF Revised 9-12)
600 series
15 Amp Sensitive
PC Board Relay
File E55708
File LR48569
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Features
• Low power sensitive coil.
• 1 Form A, 1 Form B and 1 Form C contact arrangements.
• Various contact materials and types for ratings to 15 amps.
• Coil assembly rated 130°C, 94V-O.
• Applications include sensor and timer controls, emergency lighting, instr-
mentation, alarm systems, smoke and fire detectors, business equip-
ment and vending machines.
Contact Data
Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C
(SPDT).
Material and Type: Gold-silver crossbar, silver-cadmium crossbar, palladi-
um crossbar, gold-flashed silver cadmium, silver sadmium oxide, find sil-
ver, gold-flashed coin silver.
Expected Mechanical Life: 10 million operations, minimum.
Expected Electrical Life: 100,000 operations, minimum, at rated load.
UL/CSA Ratings @ 25°C
Initial Dielectric Strength
Between Open Contacts: 500VAC, 60 Hz., 2 seconds.
Between Coil and Contacts: 1,000VAC, 60 Hz., 2 seconds.
Coil Data @ 25°C
Rated Voltage: 3 to 48VDC.
Maximum Voltage @ 85°C: 120% of Rated Voltage.
Nominal Power @ 25°C: 110mW for 3A and 5A rated models;
240mW for 15A rated models.
Maximum Power @ 25°C: 1W.
Duty Cycle: Continuous.
Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC
and 50% rel. humidity.
Operate Data @ 25°C
Must Operate Voltage: 75% of nominal.
Must Release Voltage: 10% of nominal.
Operate Time: 10 ms, typ.
Release Time: 10 ms, typ.
Environmental Data
Temperature Range:
Storage: -55°C to +85°C.
Operating: -55°C to +85°C.
Mechanical Data
Termination: Printed circuit terminals.
Enclosures: Unsealed dust cover or sealed plastic case.
Weight: 1.6 oz. (45g) approximately.
DC Resistance in Ohms Must Must
Nominal ±10% Operate Release
Voltage Voltage Voltage
VDC 3 A & 5A Types 15A Types VDC VDC
3 82 38 2.25 0.3
6 327 150 4.5 0.6
9 736 338 6.75 0.9
12 1,309 600 9.0 1.2
18 2,945 1,350 13.5 1.8
24 5,236 2,400 18.0 2.4
28 7,127 3,267 21.0 2.8
48 20,945 9,600 36.0 4.8
Coil Data @ 25°C
Code Contact Material Rating
B Au Flashed AgCd 75VA@24VAC Pilot Duty§
1A@120VAC General Purpose
1.5A@50VDC Resistive
600W@277VAC Gen’l. Purpose SPST-NO Only
240W@277VAC Gen’l. Purpose SPST-NC Only
480VA@277VAC Pilot Duty SPDT Only
480VA@Ballast SPDT Only
1/10 HP@120VAC
G Au Ag 3A@28VDC Resistive
125VA@120VAC Pilot Duty§
1/8 HP@120/240 VAC
H AgCdO 15A@150VAC Inductive 0.4 PF NO Only
10A@277VAC Resistive
15A@28VDC Resistive
TV5@NO Contacts
TV2@NC Contacts
600W@277VAC Tungsten SPDT-NO Only
240W@277VAC Tungsten SPDT-NC Only
480VA@277VAC Pilot Duty SPDT Only §
480VA@277VAC Ballast SPDT Only
1/3 HP@120/240VAC NO
1/6 HP@120/240VAC NC
K Au Flashed Coin Ag 5A@240VAC Resistive
5A@28VDC
125VA@240VAC Pilot Duty §
125VA@125VAC Pilot Duty §
R Fine Ag 15A@150VAC Resistive
15A@28VDC Resistive
10A@277VAC Resistive
480VA@240VAC Pilot Duty
TV2@NC Contacts
TV4@NO Contacts
480W@120VAC Tungsten NO
240W@120VAC Tungsten NC
S Ag Cd 3A@240VAC Resistive
3A@28VDC Resistive
V Palladium 2A@28VDC Resistive
§ Only when Code Y Electrical Spacing is specified.
498
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
P&B
Catalog 1308242
Issued 3-03 (PDF Revised 9-12)
.546
(13.9)
.273
(6.93)
.313
(7.95)
.843
(21.4)
.297
(7.54) .594
(15.1)
.067 DIA. TYP.
(1.70)
Typical Part Number > 60 3 – 24 VYQ
1. Basic Series Type:
60 = Miniature, PC board relay rated 3A or 5A (Contact Material Code G, S, V or B only)
61 = Miniature, PC board relay rated 15A (Contact Material Code H or R only)
65 = Miniature, PC board relay rated 5A (Contact Material Code K only)
2. Contact Arrangement:
1 = 1 Form A (SPST-NO) 2 = 1 Form B (SPST-NC) 3 = 1 Form C (SPDT)
3. Coil Voltage:
3 = 3VDC 9 = 9VDC 18 = 18VDC 28 = 28VDC
6 = 6VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC
4. Contact Material:
G = Au Ag crossbar, rated 3A (Only available with Basic Series Type 60).
S = Au Cd crossbar, rated 3A (Only available with Basic Series Type 60).
V = Pd crossbar, rated 3A (Only available with Basic Series Type 60).
B = Au-flashed AgCd crossbar, rated 5A (Only available with Basic Series Type 60).
H = AgCdO, rated 15A (Only available with Basic Series Type 61).
R = Fine Ag, rated 15A (Only available with Basic Series Type 61).
K = Au-flashed coin Ag, rated 5A (Only available with Basic Series Type 65).
5. Electrical Spacing:
Leave Blank = 0.125 in (3.175 mm) Clearance and 0.125 in (3.175 mm) Creepage
Y = 0.125 in (3.175 mm) Clearance and 0.250 in (6.35 mm) Creepage
6. Enclosure Type
Leave Blank = Unsealed dust cover Q = Sealed cover
Our authorized distributors are more likely to stock the following items for immediate delivery.
None at present.
Ordering Information
Outline Dimensions PC Board Layout (Bottom View)
.775 MAX.
(19.69)
1.200 MAX.
(30.48)
.240
(6.1)
1.250 MAX.
(31.75)
Note: On single throw models, only necessary terminals are present.
Wiring Diagrams (Bottom Views)
1 Form A
(SPST-NO)
1 Form B
(SPST-NC)
1 Form C
(SPDT)
Note: On single throw models, only necessary terminals are present.
Disclaimer
While TE has made every reasonable effort to ensure the accuracy of the infor-
mation in this document , TE does not guarantee that it is error-free, nor does TE
make any other representation, warranty or guarantee that the information is
accurate, correct, reliable or current.
TE reserves the right to make any adjustments to the information contained
herein at any time without notice. TE expressly disclaims all implied warranties
regarding the information contained herein, including, but not limited to, any
implied warranties of merchantability or fitness for a particular purpose.
The dimensions in this document are for reference purposes only and are sub-
ject to change without notice. Specifications are subject to change without
notice. Consult TE for the latest dimensions and design specifications.
© 2012 Tyco Electronics Corporation
a TE Connectivity Ltd. company
TE Connectivity (logo) and TE Connectivity are trademarks of the TE Connectivity group of
companies and its licensors.
Other logos, product or company names may be trademarks of their respective owners.
