Sign In SHOP BLOG LEARN FORUMS 0 Items VIDEOS ROBOTICS & CNC / CNC / LINEAR RAIL SHAFT GUIDE/SUPPORT - 8MM DIAMETER Linear Rail Shaft Guide/Support - 8mm Diameter - SK8 PRODUCT ID: 1182 IN STOCK ADD TO CART 1 1-9 10-99 100+ ADD TO WISHLIST DESCRIPTION TECHNICAL DETAILS DESCRIPTION If you have an 8mm linear rail, you'll want to give it a bit of guidance and support to help it through the day. Sometimes a good word and a pat on the back is all you need, but when that's not enough, use a pair of these aluminum cast rail supports! Usable with any 8mm linear guide, you can simply slide the rail through, then tighten the clamp screw at the top to fix it in place. Then use up to 6mm diameter bolts to attach them. If you need to disassemble or otherwise repair your robot or machine, its easy to open up the clamp and remove the rail. Each item comes with one support, so chances are you'll want to buy two of these to support a single railing. We have a bunch of bearings and platforms that you may want to use with an 8mm based rail system so check out our CNC category New Products 2/2/2013 Linear Rail Shaft Guide/Support - 8mm Diameter (4:52) TECHNICAL DETAILS MAY WE ALSO SUGGEST... Adjustable Angle Support for 2020 Aluminum 8mm Diameter Linear Bearing Pillow Block Linear Bearing Platform (Small) - 8mm Diameter Slotted Aluminum Extrusion - 20mm x 20mm - 610mm 12mm Diameter Linear Bearing Pillow Block 15mm Diameter Linear Bearing Pillow Block Linear Bearing Supported Slide Rail - 15mm wide - 15mm Diameter Linear Bearing Pillow Block - Wider DISTRIBUTORS EXPAND TO SEE DISTRIBUTORS CONTACT SUPPORT DISTRIBUTORS EDUCATORS "A late game is only late until it ships. A bad game is bad until the end of time" - Shigeru Miyamoto JOBS FAQ SHIPPING & RETURNS TERMS OF SERVICE PRIVACY & LEGAL ABOUT US ENGINEERED IN NYC Adafruit (R) 4.9