DS-112-PIN - M/A-COM Technology Solutions

Four-Way Power Divider

10-500 MHz

Rev. V6

DS-112 / DS-312

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 Low Loss: 0.6 dB Typical

 High Isolation: 30 dB Typical

 Low VSWR: 1.2:1 Typical

 Impedance: 50 Ohms Nominal

 Maximum Power Rating or Input Power: 1W Max.

 Internal Load Dissipation: Ds-112 -0.05 W Max.

DS-312– 0.25 Watts Max.

 MIL-STD-202 Screening Available

Description

A Power Divider is ideally a lossless reciprocal

device which can also perform vector summation of

two or more signals and thus is sometimes called a

power combiner or summer.

Pin Configuration (DS-112)

Pin No. Function Pin No. Function

1 GND 8 Output

2 None 9 GND

3 None 10 Output

4 Input 11 GND

5 GND 12 Output

6 None 13 GND

7 GND 14 Output

FP-5 (DS-112)

C-14 (DS-312)

Four-Way Power Divider

10-500 MHz

Rev. V6

DS-112 / DS-312

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DS-112 Electrical Specifications1: TA = -55°C to +85°C

Parameter Test Conditions Frequency Units Min Typ Max

Insertion Loss

Less Coupling

10 - 400 MHz

400 - 500 MHz

—

0.75

0.85

Isolation

—

10 - 500 MHz

—

Amplitude Balance

—

10 - 500 MHz

—

0.2

Phase Balance

—

10 - 500 MHz

—

VSWR All Ports 10 - 25 MHz

25 - 500 MHz

Ratio

—

1.5:1

1.35:1

1. All specifications apply with 50 ohm source and load impedance.

DS-312 Electrical Specifications1: TA = -55°C to +85°C

Parameter Test Conditions Frequency Units Min Typ Max

Insertion Loss

Less Coupling

10 - 400 MHz

400 - 500 MHz

—

0.75

0.85

Isolation

—

10 - 500 MHz

—

Amplitude Balance

—

10 - 500 MHz

—

0.2

Phase Balance

—

10 - 500 MHz

—

VSWR

All Ports

10 - 400 MHz

400 - 500 MHz

Ratio

—

1.5:1

1.35:1

Four-Way Power Divider

10-500 MHz

Rev. V6

DS-112 / DS-312

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves

Ordering Information

Isolation Insertion Loss

VSWR

Part Number Package

DS-112 PIN FP-2

DS-312 BNC C-14

DS-312 TNC C-14

DS-312 N C-14

DS-312 SMA C-14

Four-Way Power Divider

10-500 MHz

Rev. V6

DS-112 / DS-312

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.