9
Solder-In Style High Temp EMI Filters
ZS/ZR Series – .128 Dia. – Circuits Available – C & L
The ZS series provides effective filtering
in the MICROWAVE frequency spectrum
from 10 MHz through 26 GHz. Designed
to be soldered into a package, bracket or
bulkhead (and maintain hermeticity), it is
ideal for high impedance circuits where
large capacitance values are not practical.
In the “L” section version an internal fer-
rite bead element provides both induc-
tance and series resistance (lossy charac-
teristic) which improves insertion loss and
provides superior transient performance.
Alternate lead lengths or special capaci-
tance values may be ordered.
Custom packages or bracket assemblies
utilizing this feedthru can be furnished to
your specifications.
• Meets or exceeds the applicable portions
of MIL-F-28861/12. See QPL listings.
• High temperature construction with-
stands 300°C installation temperatures.
• Features rugged monolithic discoidal
capacitor construction.
• Glass hermetic seal on one end with
epoxy seal on the opposite end.
• High purity gold plating provides excel-
lent solderability or compatibility with
thermal and ultrasonic wire bonding.
1. Plating: Gold standard –
Silver and solder coat available
2. Material:
Case: Cold rolled steel
Leads: Alloy 52 steel
3. Operating Temperature Range:
-55°C to +125°C
4. Insulation Resistance:
At 25°C: 1,000 megohm-microfarad
min., or 100,000 megohms
min., whichever is less
At 125°C: 100 megohm-microfarad
min., or 10,000 megohms
min., whichever is less
5. Dielectric Withstanding Voltage (DWV):
R-level designs:
2.0 times rated DC voltage
Class B, Class S designs:
2.5 times rated DC voltage
6. DC Resistance (DCR): .01 ohm,
maximum
7. Dissipation Factor (DF): 3% maximum
8. Rated DC Current: 5 Amps, maximum
9. Maximum Installation Temperature:
300°C
10. Supplied with 60/40 solder preform for
easy installation
11. Insertion Loss for the “C” and “L” circuits
are equivalent due to the saturation
characteristic of the ferrite bead element
at full rated current. At lower currents the
“L” becomes much more effective.
SPECIFICATIONS
.128
±.005
.020
±.005
A.25
±.03
B
GLASS SEAL
.156
±.005
.030
±.002
0.05 (.002) 3.25 (.128)
0.13 (.005) 3.96 (.156)
0.51 (.020) 5.08 (.200)
0.76 (.030) 6.4 (.25)
0.8 (.03) 15.88 (.625)
2.79 (.110) 18.16 (.715)
Notes:
1. Outline drawing shows stan-
dard ZS configuration. Also
available with glass seal at
the opposite end, ZR reverse
configuration.
2. MIL-F-28861/12 style FS70
equivalent to standard ZS
configuration. Style FS71 is
reverse ZR configuration.
3. For ZS2 or ZR2 L-Section
Filters inductor always posi-
tioned at epoxy-filled end.
4. Metric equivalent dimensions
given for information only.
millimeters (inches)
C
ZS1, ZR1
CIRCUIT DIAGRAMS
STANDARD CONFIGURATION
ZS2 (See Note 3)
GLASS
SEAL
END
FLANGE
END
ZR2
GLASS
SEAL
END
FLANGE
END
CHARACTERISTICS
APPLICATIONS
Dimensions
Circuit A B
Diagram ±.005 Nom.
L.200 .715
C.110 .625
Dash No. Style
001 through 016, FS70
033 and 034
017 through 032, FS71
035 and 036
MIL-F-28861/12 (See Note 2)
(See Note 4)
Solder-In Style High Temp EMI Filters
ZS/ZR Series – .128 Dia. – Circuits Available – C & L
10
Insertion Loss2Per MIL-STD-220, +25°C
AVX Current DC CAP1500 1 10 100 1000 10
P/N AMP CKT Voltage Min. KHz MHz MHz MHz MHz GHz
ZS1C2-501H 5 C 50 500 – – – 15 30 50
ZS1C2-102H 5 C 50 1000 – – 4 20 31 55
ZS1C2-122H 5 C 50 1200 – – 5 20 35 55
ZS1C2-272H 5 C 50 2700 – – 10 25 40 60
ZS1C2-502H 5 C 50 5000 – – 15 30 45 60
ZS1C2-103H 5 C 50 .010 – 4 20 35 48 60
ZS1C2-153H 5 C 50 .015 – 7 25 40 50 60
ZS2C2-501H 5 L 50 500 – – – 15 30 50
ZS2C2-102H 5 L 50 1000 – – 4 20 33 55
ZS2C2-122H 5 L 50 1200 – – 5 20 37 55
ZS2C2-272H 5 L 50 2700 – – 10 25 40 60
ZS2C2-502H 5 L 50 5000 – – 15 30 45 60
ZS2C2-103H 5 L 50 .010 – 4 20 38 50 60
ZS2C2-153H 5 L 50 .015 – 7 25 42 50 60
ZS1A2-101H 5 C 100 100 – – – 3 20 30
ZS1A2-501H 5 C 100 500 – – – 15 30 50
ZS1A2-102H 5 C 100 1000 – – 4 20 31 55
ZS1A2-122H 5 C 100 1200 – – 5 20 35 55
ZS1A2-272H 5 C 100 2700 – – 10 25 40 60
ZS1A2-502H 5 C 100 5000 – – 15 30 45 60
ZS1A2-103H 5 C 100 .010 – 4 20 35 48 60
ZS1A2-153H 5 C 100 .015 – 7 25 40 50 60
ZS2A2-100H 5 L 100 10 ––––510
ZS2A2-250H 5 L 100 25 ––––1015
ZS2A2-101H 5 L 100 100 – – – 3 20 30
ZS2A2-501H 5 L 100 500 – – – 15 30 50
ZS2A2-102H 5 L 100 1000 – – 4 20 33 55
ZS2A2-122H 5 L 100 1200 – – 5 20 37 55
ZS2A2-272H 5 L 100 2700 – – 10 25 40 60
ZS2A2-502H 5 L 100 5000 – – 15 30 45 60
ZS2A2-103H 5 L 100 .010 – 4 20 38 50 60
ZS2A2-153H 5 L 100 .015 – 7 25 42 50 60
1Decimal point values indicate capacitance in microfarads.
Non-decimal point values indicate capacitance in picofarads.
2Insertion loss limits are based on theoretical values.
Actual measurements may vary due to internal capacitor
resonances and other design constraints.
NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal
opposite the flange end. All parts are capable of the reverse configuration with the glass
seal at the flange end. All parameters are otherwise identical. The part number changes
from “S” to “R” (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H).
For special multi-unit assemblies see Multi-Component Filter Brackets section.
SPECIFICATIONS
continued
11
Solder-In Style High Temp EMI Filters
ZS/ZR Series – .128 Dia. – Circuits Available – C & L
Insertion Loss2Per MIL-STD-220, +25°C
AVX Current DC CAP1500 1 10 100 1000 10
P/N AMP CKT Voltage Min. KHz MHz MHz MHz MHz GHz
ZS1B2-100H 5 C 200 10 ––––410
ZS1B2-250H 5 C 200 25 ––––1015
ZS1B2-101H 5 C 200 100 – – – 3 20 30
ZS1B2-501H 5 C 200 500 – – – 15 30 50
ZS1B2-102H 5 C 200 1000 – – 4 20 31 55
ZS1B2-122H 5 C 200 1200 – – 5 20 35 55
ZS1B2-272H 5 C 200 2700 – – 10 25 40 60
ZS2B2-100H 5 L 200 10 ––––510
ZS2B2-250H 5 L 200 25 ––––1015
ZS2B2-101H 5 L 200 100 – – – 3 20 30
ZS2B2-501H 5 L 200 500 – – – 15 30 50
ZS2B2-102H 5 L 200 1000 – – 4 20 33 55
ZS2B2-122H 5 L 200 1200 – – 5 20 37 55
ZS2B2-272H 5 L 200 2700 – – 10 25 40 60
SPECIFICATIONS
1Decimal point values indicate capacitance in microfarads.
Non-decimal point values indicate capacitance in picofarads.
2Insertion loss limits are based on theoretical values.
Actual measurements may vary due to internal capacitor
resonances and other design constraints.
NOTE: AVX Filters' Standard configurations (e.g. ZS, YS, XS, WS) have the hermetic glass seal
opposite the flange end. All parts are capable of the reverse configuration with the glass
seal at the flange end. All parameters are otherwise identical. The part number changes
from “S” to “R” (e.g., standard = ZS1C2-153H; reverse = ZR1C2-153H).
For special multi-unit assemblies see Multi-Component Filter Brackets section.
