15
STEGO - PRODUCT CATALOGUE
These small heaters are designed to prevent condensation and to ensure a minimum operating temperature in
small enclosures. The heaters are designed for permanent operation.
> Wide voltage range
> Dynamic heating up
> Energy saving
> Compact
Example of connection
Thermostat
KTO 011 (NC)
Heater RC 016
TECHNICAL DATA
Operating voltage AC/DC 120 – 240 V¹ (min. 110 V, max. 265 V)
Heating element PTC resistor – temperature limiting
Heater body aluminium, anodised
Mounting screw fixing
Fitting position variable
Operating/Storage temperature -45 to +70 °C (-49 to +158 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP54 / II (double insulated)
Approvals VDE, UL File No. E150057 (according to UL 508A, NITW File on
request), EAC
Note other voltages on request
¹ Operating with voltages below AC/DC 140 V reduces heating performance by approx. 10 %.
Art. No. Heating capacity² Inrush current max. Recommended pre-fuse T (time-delay) Surface temperature (approx.) Connection Weight (approx.)
01602.0-00 8 W 2.0 A 2.0 A +150 °C 2 x AWG 18 stranded wire 20 g
01609.0-00 10 W 2.5 A 4.0 A +155 °C 2 x AWG 22 cable (silicone) 30 g
01610.0-00 13 W 3.0 A 4.0 A +170 °C 2 x AWG 22 cable (silicone) 40 g
² at +20 °C (+68 °F) ambient temperature
SMALL SEMICONDUCTOR HEATER
RC 016 | 8 W, 10 W, 13 W
Art. No. 01602.0-00
Art. No. 01609.0-00
Art. No. 01610.0-00
HEATING
19.03.2019 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se
15
TECHNICAL DATASHEET
