OCO100
OCXO
Corning Frequency Control • Worldwide Data Book 2001 v1.0.2000-11-01
Corning Frequency Control Inc. • 100 Watts Street • Mt. Holly Springs, PA 17065 • Tel 1-717-486-3411 • Fax 1-717-486-5920 • www.corningfrequency.com
Tele Quarz GmbH & Co. KG • Landstrasse • D-74924 Neckarbischofsheim, Germany • Tel +49-7268-801-0 • Fax +49-07268-801-281 • www.telequarz.de
1 / 2
Typical Applications Features
Base Station AT-Cut Crystal
Synthesizer
Switching
Frequency range 4 MHz – 26 MHz
Standard frequencies 4.096; 10; 12 MHz
Frequency stabilities
Parameter Frequency stability Operating temp range
vs. operating temperature range < ±100ppb -20 ... 60°C
Parameter Value Condition
vs. supply voltage change
vs. load change
vs. aging /1. Year
< ± 20 ppb
< ± 20 ppb
< ± 500 ppb
static
static
after 30 days
Frequency tuning
Parameter Value Condition
Electrical Frequency Control (EFC) > ± 3 ppm External Trimmer 20
kOhm
RF output
Parameter Option Value Condition
Signal CCMOS
Load 15 pF ± 5 %
Duty Cycle 40/60% @ Vs/2
Supply Voltage
Parameter Value Condition
Supply voltage (Vs)12 V ± 10 %
Power consumption steady state < 1.0 W @ 25 °C
During warm up < 2.2 W
Additional parameters
Parameter Value Condition
Phase Noise < -60 dBc/Hz 1Hz Note 1
< -90 dBc/Hz 10 Hz
< -120 dBc/Hz 100 Hz
< -140 dBc/Hz 1kHz
< -140 dBc/Hz 10 kHz
< -140 dBc/Hz 100 kHz
Warm-up time < 2.5 min @25°C
Weight < 35 g
Operable temperature range -40 ... +90°C
Storage temperature range -55 ... +105°C
Processing & Packing handling&processing note
OCO100
OCXO
Corning Frequency Control • Worldwide Data Book 2001 v1.0.2000-11-01
Corning Frequency Control Inc. • 100 Watts Street • Mt. Holly Springs, PA 17065 • Tel 1-717-486-3411 • Fax 1-717-486-5920 • www.corningfrequency.com
Tele Quarz GmbH & Co. KG • Landstrasse • D-74924 Neckarbischofsheim, Germany • Tel +49-7268-801-0 • Fax +49-07268-801-281 • www.telequarz.de
2 / 2
Enclosure
Type G107B Note 2
Drawing
27,2max.
17,8
15,24
H
4,5min.
ø0,8
36,1max.
25,4
17,8
0,8max.
±0,2
±0,5
±0,5
±0,2
3
2
15
4
G 107
(DIN) IEC 679-3 CO 08
H = 19,4 max.; G107 B
Pin Connections
Pin
Pin
Pin
Pin
Pin
1
2
3
4
5
Trimmer, EFC
Trimmer, Reference voltage
Supply voltage (Vs)
RF Output
GND, Case
Ordering Code Option
Model Output signal Frequency
Example: OCO100 C10M000000
Order: OCO100
Note
1Typical values @ 10 MHz
2We reserve the right to replace the enclosure G107 by the resistance-welded version G157
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage,
frequency control voltage, load, temperature (25°C)
Subject to technical modification; Not all options and codes are available at all Frequencies