OCXO OCO100 Typical Applications Base Station Synthesizer Switching Features AT-Cut Crystal Frequency range 4 MHz - 26 MHz Standard frequencies 4.096; 10; 12 MHz Frequency stabilities Parameter vs. operating temperature range Parameter vs. supply voltage change vs. load change vs. aging /1. Year Frequency stability Operating temp range < 100ppb -20 ... 60C Value Condition < 20 ppb < 20 ppb < 500 ppb static static after 30 days Frequency tuning Parameter Value Condition > 3 ppm External Trimmer 20 kOhm Option Value Condition C CMOS 15 pF 5 % 40/60% @ Vs/2 Value Condition 12 V 10 % < 1.0 W < 2.2 W @ 25 C Electrical Frequency Control (EFC) RF output Parameter Signal Load Duty Cycle Supply Voltage Parameter Supply voltage (Vs) Power consumption steady state During warm up Additional parameters Parameter Phase Noise Warm-up time Weight Operable temperature range Storage temperature range Processing & Packing Corning Frequency Control * Worldwide Data Book 2001 Value < -60 dBc/Hz < -90 dBc/Hz < -120 dBc/Hz < -140 dBc/Hz < -140 dBc/Hz < -140 dBc/Hz < 2.5 min < 35 g -40 ... +90C -55 ... +105C Condition 1 10 100 1 10 100 Hz Note 1 Hz Hz kHz kHz kHz @25C handling&processing note v1.0.2000-11-01 Corning Frequency Control Inc. * 100 Watts Street * Mt. Holly Springs, PA 17065 * Tel 1-717-486-3411 * Fax 1-717-486-5920 * www.corningfrequency.com Tele Quarz GmbH & Co. KG * Landstrasse * D-74924 Neckarbischofsheim, Germany * Tel +49-7268-801-0 * Fax +49-07268-801-281 * www.telequarz.de 1/2 OCXO OCO100 Enclosure Type G107B Note 2 Drawing G 107 36,1max. (DIN) IEC 679-3 CO 08 25,4 0,2 H = 19,4 max.; G107 B 17,8 0,5 1 27,2max. 17,8 15,24 0,5 2 0,2 4 3 Pin Connections Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Example: Order: Ordering Code Model OCO100 OCO100 Note 1 2 o0,8 4,5min. 0,8max. H 5 Trimmer, EFC Trimmer, Reference voltage Supply voltage (Vs) RF Output GND, Case Option Output signal C Frequency 10M000000 Typical values @ 10 MHz We reserve the right to replace the enclosure G107 by the resistance-welded version G157 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C) Subject to technical modification; Not all options and codes are available at all Frequencies Corning Frequency Control * Worldwide Data Book 2001 v1.0.2000-11-01 Corning Frequency Control Inc. * 100 Watts Street * Mt. Holly Springs, PA 17065 * Tel 1-717-486-3411 * Fax 1-717-486-5920 * www.corningfrequency.com Tele Quarz GmbH & Co. KG * Landstrasse * D-74924 Neckarbischofsheim, Germany * Tel +49-7268-801-0 * Fax +49-07268-801-281 * www.telequarz.de 2/2