GA355QR7GB103KW01L - Murata Electronics

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Explanation of Symbols in This Catalog

Low

ESL

Derating

Ultra-

compact

Anti-

noise

Deflecting

crack

Soldering

crack

HiQ

L x W dimension: products of 0.6 x 0.3 mm or less

Low dissipation for high frequency

By devising ceramic materials and electrode materials,

low dissipation is achieved in frequency bands of VHF,

UHF and microwave or beyond.

Low inductance

This capacitor is designed so that

the parasitic inductance component (ESL)

that the capacitor has on the high frequency

side becomes lower.

Product suitable for acoustic noise reduction and low distortion

This product suppresses acoustic noise,

which occurs when a ceramic capacitor is used,

by devising the materials and configuration.

Product resistant to deflection cracking

This capacitor is designed to prevent failures as much

as possible by short mode caused by cracking

when there is board deflection.

Product with solder cracking suppression

This capacitor is configured with metal terminals

and leads connected to the chip.

The metal terminals and leads relieve the stress from expansion

and contraction of the solder, to suppress solder cracking.

Voltage and temperature derating recommended product

This product is suitable when a voltage continuously applied

to a capacitor in an operating circuit, is used below (derated)

the rated voltage of the capacitor.

This model guarantees the test conditions in the endurance test,

at a rated voltage x 100% at the maximum operating temperature.

A reliability assurance level equivalent to a common product

can be secured, by using this product within the voltage and

temperature derated conditions recommended in the figure below.

sRecommended Conditions of the Derating Operating Voltage and Temperature

0255075100125150

100

120

Operating Voltage/Rated Voltage (%)

Product Temperature (°C)

125°C Type

105°C Type

85°C Type

For General Purpose GRM Series Capacitance Table

EU RoHS

Compliant

sAll the products in this catalog comply with EU RoHS.

sEU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment."

sFor more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).

For General Pur ose

GRM

Contents

Selection Guide p2

Capacitance Table p3

Part Numbering p15

ISO 9001 Certifications p215

Introduction of WEB SimSurfing p216

EMICON-FUN! p217

Product Information p218

Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.

!Caution/Notice p118

For General Purpose GRM Series

(Less than 250Vdc) p21

separate volume

Capacitor Array GNM Series p76 p4

Low ESL LLL/LLR/LLA/LLM Series p79 p5

High-Q Type GJM Series p82 p7

High Frequency GQM Series p104 p8

Monolithic Microchip GMA Series p113 p9

For Bonding GMD Series p115 p10

Chip Monolithic Ceramic Capacitors

Cap. Table

Reference Data (Typical Example) p182

Package p185

!Caution/Notice p188

Chip Monolithic Ceramic Capacitors

(Medium Voltage)

For General Purpose

GRM (250Vdc min.)/GRJ/GR3 Series

Temperature Compensating Type

GRM Series (250Vdc min.) p136

separate volume

High Dielectric Constant Type

GRM Series (250Vdc min.) p143

separate volume

Soft Termination Type GRJ Series p148 p11

Large Capacitance and High Allowable

Ripple Current GR3 Series p153 p11

Only for Applications

For LCD Backlight Inverter Circuit

GRM/DC3.15kV Series p158 p12

For Information Devices GR4 Series p161 p12

For Camera Flash Circuit GR7 Series p165 p12

UL, IEC60384-14 Class X1/Y2 Type GC p173 p13

IEC60384-14 Class Y2, X1/Y2 Type GF p174 p13

IEC60384-14 Class Y3 Type GD p176 p13

IEC60384-14 Class X2 Type GB p177 p13

AC250V Type (Which Meet Japanese Law)

GA2 Series p169 p12

Safety Standard Certified GA3 Series

Cap. Table

Metal Terminal Monolithic

Ceramic Capacitors

For General Purpose KRM/KR3 Series

High Capacitance for General Use

KRM Series p200 p14

Large Capacitance and High Allowable

Ripple Current KR3 Series

p204 p14

Package p208

!Caution/Notice p210

Cap. Table

Product specifications are as of July 2012.

cifications are as of Jul

201

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Selection Guide For Chip Monolithic Ceramic Capacitors

Applications?

GRM (X5R, X7R, Y5V etc.)

68pF–150μF

GNM

470pF–2.2μF

GRM (C0G)

0.1pF–0.1μF

GRM (U2J etc.)

LLL

2200pF–10μF

LLA/LLM (From 1GHz)

0.01μF–4.7μF

GJM (500MHz to 10GHz)

0.1pF–47pF

GQM (500MHz to 10GHz)

0.1pF–100pF

GMA 100pF–0.47μF

GMD 100pF–0.47μF

GRM (C0G, U2J)

10pF–47000pF

GRM (C0G)

5pF–47pF

GRM (X7R)

220pF–1μF

GR7

10000pF–47000pF

GR4

100pF–10000pF

Type GD 10pF–4700pF

Type GF 10pF–4700pF

Type GC 100pF–330pF

Type GF 470pF–4700pF

Type GB 10000pF–56000pF

GA2

470pF–0.1μF

GCM (X7R etc.)

100pF–47μF

GCM (C0G etc.)

1.0pF–56000pF

High Capacitance

Array (2 or 4 Elements)

Class 1 TC's

Low Inductance

(Reverse Geometry)

LLR

1.0μF

Low Inductance

(Controlled ESR)

Low Inductance

(Multi-Termination)

Low ESR, Ultra Small

Lowest ESR

Wire-Die-Bonding

250V/630V/1kV/2kV/3.15kV

Low Dissipation

3.15kV

Low Dissipation

250V/630V/1kV

High Capacitance

GRJ (X7R)

470pF–1μF

250V/630V/1kV

Soft Termination

GR3 (X7T)

10000pF–1μF

250V/450V/630V

Large Capacitance and

High Allowable Ripple Current

350V

High Capacitance

2kV

High Capacitance

Safety Standard

Certified

Safety Standard

Certified

AC250V which meets

Japanese Law

High Capacitance

Class 1 TC's

250V/630V/1kV

Low Dissipation

250Vdc min.

High-Frequency Snubber

Optical Communications

High Frequency

High Speed Decoupling

Frequency Control/Tuning,

Impedance Matching

Decoupling, Smoothing

Automotive

(Powertrain,

Safety Equipment)

250Vdc min.

LCD Backlight Inverter

250Vdc min.

Decoupling, Smoothing

250Vdc min.

For Camera Flash Circuit only

GCM (U2J)

10pF–47000pF

250V/630V

Soft Termination

GCJ (X7R)

1000pF–0.47μF

250Vdc min.

for Automotive

(Powertrain, Safety Equipment)

AC Lines Noise Removal

250Vdc min.

For Information Devices only

Function Type Series

Capacitance Table

Temperature

Characteristic Codes

Public

STD Code

Reference

Temperature

Temperature Characteristics Capacitance Change Each Temperature (%)

Capacitance Change

or Temperature

Coefficient

Operating

Temperature

Range –55°C

Max.

–25°C –10°C

Temperature

Range

C0G

C0H

P2H

R2H

S2H

T2H

U2J

X7R

X7S

X7T

X7U

X6S

X6T

X5R

X5S

-: Murata Temperature Characteristic

EIA

JIS

EIA

JIS

EIA

JIS

EIA

JIS

EIA

JIS

EIA

JIS

EIA

JIS

EIA

JIS

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

25 to 125°C

20 to 125°C

20 to 85°C

25 to 85°C

20 to 85°C

25 to 85°C

20 to 85°C

25 to 85°C

20 to 85°C

25 to 85°C

20 to 85°C

25 to 125°C

20 to 85°C

–55 to 125°C

–55 to 105°C

–55 to 85°C

–25 to 85°C

–55 to 125°C

0±30ppm/°C

0±60ppm/°C

0±250ppm/°C

0±120ppm/°C

0±60ppm/°C

+350 to –1000ppm/°C

–150±60ppm/°C

–150±250ppm/°C

–150±120ppm/°C

–150±60ppm/°C

–220±60ppm/°C

–220±250ppm/°C

–220±120ppm/°C

–220±60ppm/°C

–330±60ppm/°C

–330±250ppm/°C

–330±120ppm/°C

–330±60ppm/°C

–470±60ppm/°C

–470±250ppm/°C

–470±120ppm/°C

–470±60ppm/°C

–750±120ppm/°C

–750±250ppm/°C

–750±120ppm/°C

±15%

±22%

+22%, –33%

+22%, –56%

±15%

±22%

+22%, –33%

±15%

±22%

±10%

–55 to 125°C

–25 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–55 to 105°C

–55 to 85°C

–25 to 85°C

–55 to 125°C

0.58

0.87

2.56

1.37

0.82

2.33

3.02

4.09

5.46

8.78

Min.

–0.24

–0.48

–1.88

–0.9

–0.45

0.72

1.28

2.16

3.28

5.04

Max.

0.4

0.59

1.54

0.82

0.49

1.61

2.36

1.65

1.32

2.08

2.74

2.03

1.7

2.81

3.35

2.63

2.3

3.75

4.12

3.4

3.07

6.04

5.65

4.94

Min.

–0.17

–0.33

–1.13

–0.54

–0.27

0.5

–0.45

0.14

0.41

0.88

–0.14

0.45

0.72

1.49

0.36

0.95

1.22

2.26

0.99

1.58

1.85

3.47

2.25

2.84

Max.

0.25

0.38

1.02

0.55

0.33

1.02

1.57

1.1

0.88

1.32

1.83

1.35

1.13

1.79

2.23

1.76

1.54

2.39

2.74

2.27

2.05

3.84

3.77

3.29

Min.

–0.11

–0.21

–0.75

–0.36

–0.18

0.32

–0.3

0.09

0.27

0.56

–0.09

0.3

0.48

0.95

0.24

0.63

0.81

1.44

0.66

1.05

1.23

2.21

1.5

1.89

o Temperature Characteristics Table

c GRM Series

For the Capacitance Table of General Purpose GRM Series,

please review the inserted Capacitance Table of

"Chip Monolithic Ceramic Capacitor and General Purpose GRM Series".

Capacitance Table

Chip Monolithic Ceramic Capacitors

For General Purpose GRM Series

Chip Monolithic Ceramic Capacitors

For General Purpose GRM Series

Capacitance Tabl

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

c GRM Series Temperature Compensating Type

p22

p23

p24

p25

p26

p27

p28

p29

p30

p31

p32

p33

p34

p35

p36

p37

p38

p39

p40

p41

p42

p43

p44

p45

p46

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

0.1pF

0.2pF

0.5pF

1.0pF

2.0pF

3.0pF

4.0pF

5.0pF

6.0pF

7.0pF

8.0pF

9.0pF

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

CΔ

C0G CH

C0G CΔC0G UΔRΔR2H SΔS2H TΔT2H UJ CΔC0G CΔC0G PΔP2H RΔR2H

50 25 50 50

0.22

0.4×0.2 0.6×0.3

0.33 0.33

1.0×0.5

0.55

P2H R2H S2H T2H U2J

CJ CH SL PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ

C0G

p00 ← Part Number List JIS:

EIA:

p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

The indication for every 0.1 pF has

been omitted for less than 10 pF.

Refer to the Part Number List for

details.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 1

(→ c GRM Series Temperature Compensating Type)

p46

p47

p48

p49

p50

p51

p52

p53

p54

p55

p56

p57

p58

p59

p60

p61

p62

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

0.5pF

1.0pF

2.0pF

3.0pF

4.0pF

5.0pF

6.0pF

7.0pF

8.0pF

9.0pF

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

10000pF

12000pF

15000pF

18000pF

22000pF

SΔS2H TΔT2H UΔSL UJU2J SL UJU2J SL UJU2J CΔC0G CΔC0G SL UJU2J SL

50 10 50 10 100 50 10

1.0×0.5

0.55 0.5

1.6×0.8

0.9

P2H R2H S2H T2H U2J

CJ CH SL PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ

C0G

p00 ← Part Number List JIS:

EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

The indication for every 0.1 pF has

been omitted for less than 10 pF.

Refer to the Part Number List for

details.

C02E.pdf

Oct.1,2012

separate volume 2

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 3

(→ c GRM Series Temperature Compensating Type)

p62

p62 p62 p62

p136

p137

p138

p62 p62 p63

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

56000pF

UJU2J CHC0G CHC0G SL UJU2J CHC0G SL UJU2J SL UJU2J C0G U2J SL UJU2J

10 100 50 50 10 250 50

1.6×0.8

0.9 0.7

2.0×1.25

0.95 1

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

P2H R2H S2H T2H U2J

CJ CH SL PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ

C0G

p00 ← Part Number List JIS:

EIA:

C02E.pdf

Oct.1,2012

separate volume 4

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series Temperature Compensating Type)

p63

p138

p63

p63 p63 p63

p139

p137

p139

p136

p137

p138

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

56000pF

68000pF

82000pF

0.1μF

CHC0G SL UJU2J SL UJU2J U2J CHC0G CHC0G SL UJU2J U2J C0G U2J C0G U2J U2J

50 10 250 100 50 2000 1000 630 250

2.0×1.25

1.35 1.45 0.95

3.2×1.6

P2H R2H S2H T2H U2J

CJ CH SL PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ

C0G

p00 ← Part Number List JIS:

EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 5

(→ c GRM Series Temperature Compensating Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

56000pF

68000pF

82000pF

0.1μF

U2J C0G U2J U2J CHC0G SL UJU2J U2J U2J CHC0G U2J U2J U2J U2J U2J U2J U2J U2J U2J

1000 630 250 50 1000 630 50 2000 630 2000 1000 1000 630 1000 630

3.2×1.6

1.25 1.8 1

3.2×2.5

1.25 2

630

1.5

p139

p139 p137

p137

p138

p63

p139

p138

p63

p140

p138

p140

p139

p138

p139

p138

p139

p138

p139

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

P2H R2H S2H T2H U2J

CJ CH SL PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ

C0G

p00 ← Part Number List JIS:

EIA:

C02E.pdf

Oct.1,2012

separate volume 6

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series Temperature Compensating Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

U2J U2J U2J U2J U2J U2J U2J U2J U2J

3150 1000 630 1000 630 1000 630 1000 630

1 1.5

4.5×

2.0 4.5×3.2

2 1.5

5.7×5.0

p140

p139

P2H R2H S2H T2H U2J

CJ CH SL PK PJ PH RK RJ RH SK SJ SH TK TJ TH UK UJ

C0G

p00 ← Part Number List JIS:

EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 7

c GRM Series High Dielectric Constant Type

BX7S X7T X7U X6S X6T X5R X5SRX7R

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

1.0×0.5

X7T

2.510

0.22

0.4×0.2

6.3 4 50

0.33

0.6×0.3

25 16 10 6.3 4 10

0.22

6.3 4

X7R

X5R, B X5R, B

X5R X7R B

X7R, R X5R, B X7R, R X5R, B X7R, R X5R, B X7R, R

X6S

X5R, B

X6S

X5R, B

X6S

X5R, B

X7T X6Δ

p64

p65

p66

p65

p66

p66 p66

p66

p66 p66

p66

p67

p66

p67

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

separate volume 8

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

1.0×0.5

10 10

0.33

6.3 4 100

0.55

50 25 16 10

X6S

X5R, B X7R, R

X6S

X5R, B X7R, R X5R, B X7R, RX7R, R

0.3

B X7R

B X5R

X5R, B

X6T

X5R, B

X6T X5R X7R

X7Δ, R

p67

p67p67 p67p67

p68

p67

p68

p69

p68

p69

p69p69

p67

p67 p67

p67

p67 p67 p67

p67

p68

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 9

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

0.9,

0.95, 1

0.7

2.5 25

0.5

1.6×0.8

16 250

0.9

100 50 25 16 256.3 2.5

X6T

2.5

X5R

X5R, B X5R, B

X7R X7R

X7R, R X5R, B X7R, R

X6S

X5R, B

X6S X6S

1.0×0.5

0.55 0.55,

0.6

10 6.3 6.34

0.6, 0.7

0.6

X6S

X5R, B

X7R X6S

X5R, B

X7R

X5R, B

X6Δ

X7Δ, R

p69

p69 p69p69

p69

p69p69 p69p69

p70

p71

p70

p71

p72

p71

p71p69 p69

p69

p143

p69

p70

p71

p72

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

0.9

0.95, 1

0.55

0.6

0.55

0.6 0.60.6

0.7

C02E.pdf

Oct.1,2012

separate volume 10

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

2.0×1.25

X5R, B

0.9,

0.95

0.9,

0.95, 1

X5R, B

X6S

X5R, B

X5R

0.7

X6S

X7R

100

0.95

X5R, B

X6S

X5R R

X7R X6S BX5R

X7R

1.6×0.8

0.9, 1

16 10 6.3

X6S

X5R, B

X6SX7ΔX7Δ

p71

p72

p71

p72

p71

p72

p71

p72

p71

p72

p71

p72

p71 p71

p72

p71

p72

p72 p72

p72

p72p72

p72

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

0.9

0.95

0.9

0.95

0.9

0.9 0.9

0.9

0.95

0.9

10.9

0.9

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 11

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

2.0×1.25

0.95, 1

X7R, R

5010

BX5R X6S

6.3

BX5R X6S

X5R X7R

250

X7R

100

X7R

100

1.35

X7R, R

X5R, B X7R, R

X6S

X5R, B

X7R

0.95

X6S BX5R X7Δ

p72

p73

p72

p73

p73p73

p73

p72

p72p72

p72

p72p72

p73

p143

p73

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

0.95

C02E.pdf

Oct.1,2012

separate volume 12

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

X6S

6.3

X7R

100

1.4

X5R, B

X7R, R

X5R, B

X7R

X6S X7R

B X7R

6.3

X6S

X5R, B

X7U X6S

X7R

250

1.45

X5R

X5R, B

6.3

X6S

X5R, B

2.0×1.25

1.35

X6S

X5R, B

p73

p73p73

p73

p73p73

p74p74 p74p74

p73

p73 p73

p73

p73 p74 p74

p143

p74

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 13

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

1.8

630

X7R

3.2×1.6

0.95

X7R, R

B X6S

X5R, B X5R, B

X6S

6.3

X5R, B

X7R

1000

1.25

X7R

630

X7R

250

1.25, 1.3

X7R, R

B X6S

B X7R

100

X5R, B

0.7

X6S

X7R

100

X7R

X5R

p74

p74p74

p74

p74p74

p74p74 p74p74

p74

p144

p143

p74

p144

p74

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

1.25

1.3

1.25

1.3

1.25

C02E.pdf

Oct.1,2012

separate volume 14

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

3.2×2.5

X5R

1.9

X5S

6.3

X6T

X5S

1.8

250 50 25 16 10 6.3 100

1.8, 1.9

6.3 4

X7R X7R

X5R, B

X7R X6S

X5R, B X7R, R

X6S

X5R, B

X7R X6S

X5R, B

X7R

X5R, B

X7UX7ΔX6ΔX6Δ

3.2×1.6

p74

p74p74

p74

p74 p74

p74

p74p74

p74

p143

p74

p74 p74

p74 p74 p74 p74

p74

p74 p74

p75 p75 p75

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

1.8

1.9

1.8

1.9

1.8

1.9

1.8

1.9

1.8

1.9

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

separate volume 15

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

3.2×2.5

X7R

2.2

X6S X7R

100

2.7

X7R

X5R, B

X7R

X5R, B

X7R

X6S

X5R, B

X7R

X6T

2.5

X7R

1000

1.5

X7R

630

X7R

250

X7R

B X6S

X7R

100

1.8

X7R

1000

X7R

630

X7R

250

p75

p75p75 p75p75

p75p75

p75

p144

p143

p75 p75

p75

p144

p143

p75 p75

p75

p75 p75

p75 p75 p75

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

separate volume 16

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

(→ c GRM Series High Dielectric Constant Type)

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

68pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

2.2μF

4.7μF

10μF

22μF

47μF

100μF

150μF

6.3

X6S

X5R, B

X7U

X6S

4.5×3.2

X7R

630

1.5

X7R

250

X7R

1000

X7R

630

X7R

250

5.7×5.0

X7R

1000

X7R

630

X7R

250

3.2×2.5

2.7

X6S

X5R, B

X7R

X6S

X5R, B

X7Δ

p75

p75p75 p75p75

p75

p75p75

p144

p143

p144

p75 p75 p75 p75

p75 p75 p75

BX7S X7T X7U X6S X6T X5R X5SRX7R

p00 ← Part Number List JIS: EIA:

Capacitance Table p00 Each number in the Part Number List refers to the page number printed at the bottom of the page.

Capacitance Table

p77

p77p77

p77p77 p77

p77 p77p77

p77p77 p77p77

p77

p77 p77p77

p77p77 p77

p77

p78

p78p78 p78p78

BX5R BX5R BX5R RX7R BX5R BX5R RX7R BX5R RX7R BX5R RX7R

0.5

BX5RRX7R

0.9×0.6

104 161050 2516

0.55 0.7

1.37×1.0

BX5R RX7R BX5R BX5R BX5R BX5R RX7R B BX5R BX5R RX7R B

16 10 16 10 6.3 16 10 6.3 50

0.7 0.8 0.55 0.7

1.37×1.0 2.0×1.25

RX7R B RX7R B BX5R BX5R

25 16 10 6.3

0.7 0.95

2.0×1.25

470pF

1000pF

2200pF

4700pF

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

470pF

1000pF

2200pF

4700pF

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

470pF

1000pF

2200pF

4700pF

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

L×W (mm)

Number of Elements

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

Number of Elements

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

Number of Elements

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

c GNM Series High Dielectric Constant Type

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

p80

p80 p80

p80

X6S

6.3

X7S

X7R

X7S

X7R

X7S

X7R

6.3

X7S

X7R

0.35 0.5 0.55 0.6 0.5 0.7 0.95

X6SX7SX7R X5R

X7S

0.5×1.0 0.8×1.6 1.25×2.0

X7R

X7S

X7R

6.3

X7R

6.3

X5R

0.95 0.5 0.8 1.25

1.25×2.0 1.6×3.2

X7S

0.55

0.8×1.6

2200pF

4700pF

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

4.7μF

10μF

2200pF

4700pF

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

4.7μF

10μF

1.0μF

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

TC Code

100

p80

220

p80

470

p80

1000

Cap. / ESR (mΩ)

c LLL Series High Dielectric Constant Type

c LLR Series High Dielectric Constant Type

p00 ← Part Number List EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

p81

p81 p81

p81

X7S

0.55

X7SX7R

X7R X7S

1.6×

0.8

X7R

6.3

X7S

X7R

6.3

X7S

X7R

6.3

X7R

0.55

2.0×1.25

0.95 0.55 0.95 1.25

3.2×1.6

X7R

0.55

2.0×1.25

X7R

6.3

X7S

X7R

6.3

0.55

3.2×1.6

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

4.7μF

10000pF

22000pF

47000pF

0.1μF

0.22μF

0.47μF

1.0μF

2.2μF

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

c LLA Series High Dielectric Constant Type

c LLM Series High Dielectric Constant Type

p00 ← Part Number List EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

p86

p87

p88

p89

p83

p84

p85

p86

p92

p93

p94

p95

p89

p90

p91

p92

p95

p99

p100

p101

p102

p103

p96

p97

p98

p99

CΔ

0.22

CK CJ CH C0G C0H

0.4×0.2 0.6×0.3

C0G CΔC0ΔCHC0G CΔC0G

0.33

25 6.3 50

0.55

1.0×0.5

0.1pF

0.2pF

1.0pF

2.0pF

3.0pF

4.0pF

5.0pF

6.0pF

7.0pF

8.0pF

9.0pF

10pF

11pF

12pF

13pF

15pF

16pF

18pF

20pF

22pF

24pF

27pF

30pF

33pF

36pF

39pF

43pF

47pF

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

c GJM Series Temperature Compensating Type

The indication for every 0.1 pF has

been omitted for less than 10 pF.

Refer to the Part Number List for

details.

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

p105

p106

p105

p106

p107

p108

p106

p107

p108

p109

p108

p109

p110

p109

p110

p111

p112

C0G

250

0.8 0.9

C0GCK CJ CH

1.6×0.8

CΔC0G CHC0G CΔC0G CHC0G C0G C0G

100 50 100 50 250 500

0.95 1 1.35

2.0×1.25 2.8×

2.8

0.1pF

0.5pF

1.0pF

2.0pF

3.0pF

4.0pF

5.0pF

6.0pF

7.0pF

8.0pF

9.0pF

10pF

11pF

12pF

13pF

15pF

16pF

18pF

20pF

22pF

24pF

27pF

30pF

33pF

36pF

39pF

43pF

47pF

51pF

56pF

62pF

68pF

75pF

82pF

91pF

100pF

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

c GQM Series Temperature Compensating Type

The indication for every 0.1 pF has

been omitted for less than 10 pF.

Refer to the Part Number List for

details.

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

p114p114

p114

p114p114

p114

p114p114

RX7R X7R X7R B RX7R B BX5R X7R X7R B RX7R B BX5R

10 100 25 10 6.3 100 25 10 6.3

0.35 0.4 0.6

RX7RBX5R

0.38×0.38 0.5×0.5 0.8×0.8

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

15000pF

22000pF

33000pF

47000pF

68000pF

0.1μF

0.47μF

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

c GMA Series High Dielectric Constant Type

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Capacitance Table

p116

p117

p116

p117

RX7R B RX7R B RX7R B BX5R RX7R B RX7R B RX7R B BX5R

0.33

RX7RBX5R

0.6×0.3

5016 2510 166.3 10

0.55

1.0×0.5

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

10000pF

12000pF

15000pF

18000pF

22000pF

27000pF

33000pF

39000pF

47000pF

56000pF

68000pF

82000pF

0.1μF

0.12μF

0.15μF

0.18μF

0.22μF

0.27μF

0.33μF

0.39μF

0.47μF

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

c GMD Series High Dielectric Constant Type

p00 ← Part Number List JIS: EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

470pF

680pF

1000pF

1500pF

2200pF

3300pF

4700pF

6800pF

10000pF

15000pF

22000pF

33000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.33μF

0.47μF

0.68μF

1.0μF

X7R

250

2.0×1.25

X7R

250

1.45

X7R

1000

1.25

3.2×1.6

X7R

630

X7R

250

X7R

1000

1.8

X7R

630

X7R

250

X7R

1000

1.5

3.2×2.5

X7R

630

X7R

250

X7R

1000

X7R

630

X7R

250

X7R

630

1.5

4.5×3.2 5.7×5.0

X7R

250

X7R

1000

X7R

630

X7R

250

X7R

1000

X7R X7R

630

250

p148

p149

p148

p149

p148

p149

p148

p149

p148

p149

p148

p149

p148

p149

p148

X7R

Capacitance Table

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

10000pF

15000pF

22000pF

33000pF

47000pF

68000pF

0.1μF

0.15μF

0.22μF

0.27μF

0.33μF

0.47μF

0.56μF

0.68μF

1.0μF

X7T

250

1 1.45 1 1.25 1.8 1.5 2 1.5 2 2

2.0×1.25 3.2×1.6 3.2×2.5 4.5×3.2 5.7×5.0

X7T

630

X7T

250

X7T

450

X7T

450

X7T

250

X7T

250

X7T

630

X7T

450

X7T

250

X7T

630

X7T

450

X7T

250

X7T

630

X7T

250

X7T

630

X7T

450

X7T

250

X7T

250

X7T

630

X7T

450

X7T

250

X7T

630

X7T

450

X7T

250

2.7

p153

p154

p153

p154

p153

p154

p153

p154

p153

p154

p153

p154

p153

p154

p153

p153 p153

p153

X7T

c GRJ Series High Dielectric Constant Type

c GR3 Series High Dielectric Constant Type

p00 ← Part Number List EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

5.0pF

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

C0G

3150

4.5×

2.0

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

10000pF

X7R X7R X7R X7R

2000

1.5

2000

1.5

2000

4.5×

2.0 4.5×3.2 5.7×

5.0

p158

p161

C0G

X7R

Capacitance Table

c GRM/DC3.15kV Series High Dielectric Constant Type

c GR4 Series High Dielectric Constant Type

c GR7 Series

c GA2 Series High Dielectric Constant Type

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vac(r.m.s.))

Cap. / TC Code

10000pF

15000pF

22000pF

27000pF

33000pF

47000pF

350

1.45

350

1.25

350

1.8

2.0×1.25 3.2×1.6

470pF

1000pF

2200pF

3300pF

4700pF

10000pF

22000pF

47000pF

0.1μF

X7R

250

1.5

X7R

250

1.5

X7R

250

X7R

250

4.5×

2.0 4.5×3.2 5.7×

5.0

p165

p169

p165

p169

p165

p169

X7R

p00 ← Part Number List EIA: Murata Temperature Characteristic:

p00 ← Part Number List

p00 ← Part Number List EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

L×W (mm)

T max. (mm)

Rated Voltage (Vac(r.m.s.))

Cap. / TC Code

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

1800pF

2200pF

3300pF

4700pF

250

4.5×2.0

X7R SL X7R X7R X7R X7R

250

1.5

250

2.2

250 250

1.5

250

1.5

250

5.7×

2.8 5.7×5.0

p174

p175

SL X7R

Capacitance Table

c GA3 Series

IEC60384-14 Class Y2, X1/Y2 Type GF

c GA3 Series

IEC60384-14 Class X2 Type GB

High Dielectric Constant Type

c GA3 Series

UL, IEC60384-14 Class X1/Y2 Type GC

High Dielectric Constant Type

c GA3 Series

IEC60384-14 Class Y3 Type GD

L×W (mm)

T max. (mm)

Rated Voltage (Vac(r.m.s.))

Cap. / TC Code

100pF

150pF

220pF

330pF

X7R

250

2.3

5.7×

5.0

p173

X7R

L×W (mm)

T max. (mm)

Rated Voltage (Vac(r.m.s.))

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vac(r.m.s.))

Cap. / TC Code

10pF

12pF

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

150pF

220pF

330pF

470pF

680pF

1000pF

1500pF

1800pF

2200pF

4700pF

250

4.5×2.0

X7R

250

1.5

250

2.2

X7R

250

1.5

4.5×3.2

X7R

250

10000pF

15000pF

22000pF

33000pF

47000pF

56000pF

X7R

250

1.5

5.7×5.0

X7R

250

X7R

250

2.5

X7R

250

2.9

p176

p177

SL X7R

X7R

p00 ← Part Number List EIA:

p00 ← Part Number List JIS: EIA:

p00 ← Part Number List EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

L×W (mm)

T max. (mm)

Rated Voltage (Vdc)

Cap. / TC Code

1.0μF

2.2μF

4.7μF

6.8μF

10μF

15μF

22μF

33μF

47μF

X5R

3.5×1.7

X7R

100

X7R

X6S

X7R

100

X7R

100

X7R

100

X7R

100

X7R

100

X7R

2.9 2.9 2.9 3 3.9 5 6.7

3.6×

1.7 3.7×

1.7 6.1×5.3

0.1μF

0.15μF

0.22μF

0.27μF

0.47μF

0.56μF

1.0μF

1.2μF

2.2μF

X7T

630

X7T

450

X7T

250

X7T

630

X7T

450

X7T

250

X7T

450

X7T

630

X7T

450

X7T

250

6.1×5.3

3.9 5 6.7

p200

p200 p200

p200 p200 p200

p200

p200 p200

p200

p200 p200

p200

p204

p204 p204

p204

p204 p204

p204

X5RX6SX7R

X7T

Capacitance Table

c KRM Series High Dielectric Constant Type

c KR3 Series High Dielectric Constant Type

p00 ← Part Number List EIA:

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.

(Part Number)

qProduct ID

wSeries

Chip Monolithic Ceramic Capacitors

Soft Termination Type

Tin Plated Layer

Large Capacitance and

High Allowable Ripple Current

Only for Information Devices

Only for Camera Flash Circuit

High Frequency for

Flow/Reflow Soldering

Monolithic Microchip

For Bonding

Capacitor Array

Low ESL Type

Controlled ESR Low ESL Type

8-termination Low ESL Type

10-termination Low ESL Type

High Frequency Low Loss Type

Low Distortion Type

Low Acoustic Type

For AC250V (r.m.s.)

Safety Standard Certified Type

For Decoupling

Product ID Code Series

102

A01

eDimensions (LgW)

Code

0.4g0.2mm

0.6g0.3mm

0.5g0.5mm

0.8g0.8mm

0.38g0.38mm

0.9g0.6mm

1.0g0.5mm

1.6g0.8mm

1.37g1.0mm

0.6g1.0mm

2.0g1.25mm

2.8g2.8mm

3.2g1.6mm

3.2g2.5mm

4.5g2.0mm

4.5g3.2mm

5.7g2.8mm

5.7g5.0mm

Dimensions (LgW)

01005

0201

0202

0303

015015

0302

0402

0603

0504

02404

0805

1111

1206

1210

1808

1812

2211

2220

EIA

1.0mm

1.25mm

1.6mm

2.0mm

2.5mm

3.2mm

1.15mm

1.35mm

1.5mm

1.8mm

2.8mm

Depends on individual standards.

rDimension (T) (Except GNM)

Code

0.2mm

0.3mm

0.4mm

0.5mm

0.6mm

0.7mm

0.8mm

0.85mm

Dimension (T)

rElements (GNM Only)

Code

2-elements

4-elements

Elements

Continued on the following page.

o Part Numberingo Part Numbering

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.

Continued from the preceding page.

Continued on the following page.

tTemperature Characteristics

Code

Temperature

Characteristic Codes

Public

STD Code

Reference

Temperature

Temperature Characteristics Capacitance Change Each Temperature (%)

Capacitance Change

or Temperature

Coefficient

Operating

Temperature

Range –55°C

Max.

–25°C –10°C

Temperature

Range

CHA

C0G

X8G

C0H

P2H

R2H

S2H

T2H

U2J

B *1

X5S

X7S

X6S

X5T

X7T

X6T

E (1/2Ur)

Z5U

X7U

F *1

Z5V

Y5V

X8L

JIS

EIA

JIS

EIA

JIS

EIA

JIS

EIA

JIS

EIA

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20°C

25°C

20 to 150°C

20 to 125°C

20 to 85°C

20 to 125°C

20 to 85°C

20 to 125°C

20 to 85°C

20 to 125°C

20 to 85°C

25 to 125°C

25 to 150°C

25 to 125°C

25 to 85°C

25 to 125°C *5

–25 to 85°C

85 to 125°C

–55 to 85°C

–55 to 125°C

–55 to 105°C

–25 to 125°C

–55 to 125°C

–55 to 105°C

–25 to 85°C

10 to 85°C

–55 to 125°C

–25 to 85°C

10 to 85°C

–30 to 85°C

–25 to 105°C

–55 to 150°C

0±60ppm/°C

0±30ppm/°C

+350 to –1000ppm/°C

0±60ppm/°C

–150±60ppm/°C

–220±60ppm/°C

–330±60ppm/°C

–470±60ppm/°C

0±120ppm/°C

–150±120ppm/°C

–220±120ppm/°C

–330±120ppm/°C

–470±120ppm/°C

–750±120ppm/°C

0±250ppm/°C

–150±250ppm/°C

–220±250ppm/°C

–330±250ppm/°C

–470±250ppm/°C

–750±250ppm/°C

0±30ppm/°C

0±60ppm/°C

–150±60ppm/°C

–220±60ppm/°C

–330±60ppm/°C

–470±60ppm/°C

–750±120ppm/°C

±10%

±20%

+15%, –30%

±22%

+20%, –30%

+22%, –33%

+20%, –55%

+22%, –56%

+30%, –80%

+22%, –82%

–20% max.

+15%, –40%

–55 to 150°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 125°C

–55 to 150°C

–55 to 125°C

–25 to 85°C

–25 to 125°C

–55 to 85°C

–55 to 125°C

–55 to 105°C

–25 to 85°C

–55 to 125°C

–55 to 105°C

–25 to 85°C

10 to 85°C

–55 to 125°C

–25 to 85°C

–20 to 85°C

–30 to 85°C

–25 to 105°C

–55 to 150°C

0.82

0.54

0.82

1.37

2.56

0.58

0.87

2.33

3.02

4.09

5.46

8.78

Min.

–0.45

–0.23

–0.45

–0.9

–1.88

–0.24

–0.48

0.72

1.28

2.16

3.28

5.04

Max.

0.49

0.33

0.49

1.32

1.7

2.3

3.07

0.82

1.65

2.03

2.63

3.4

4.94

1.54

2.36

2.74

3.35

4.12

5.65

0.4

0.59

1.61

2.08

2.81

3.75

6.04

Min.

–0.27

–0.14

–0.27

0.41

0.72

1.22

1.85

–0.54

0.14

0.45

0.95

1.58

2.84

–1.13

–0.45

–0.14

0.36

0.99

2.25

–0.17

–0.33

0.5

0.88

1.49

2.26

3.47

Max.

0.33

0.22

0.33

0.88

1.13

1.54

2.05

0.55

1.1

1.35

1.76

2.27

3.29

1.02

1.57

1.83

2.23

2.74

3.77

0.25

0.38

1.02

1.32

1.79

2.39

3.84

Min.

–0.18

–0.09

–0.18

0.27

0.48

0.81

1.23

–0.36

0.09

0.3

0.63

1.05

1.89

–0.75

–0.3

–0.09

0.24

0.66

1.5

–0.11

–0.21

0.32

0.56

0.95

1.44

2.21

*1 Capacitance change is specified with 50% rated voltage applied.

*2 Murata Temperature Characteristic Code.

*5 Rated Voltage 100Vdc max: 25 to 85°C

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.

Continued from the preceding page.

uCapacitance

Expressed by three-digit alphanumerics. The unit is picofarad

(pF). The first and second figures are significant digits, and the

third figure expresses the number of zeros which follow the two

numbers. If there is a decimal point, it is expressed by the capital

letter "R." In this case, all figures are significant digits.

If any alphabet, other than "R", is included, this indicates the

specific part number is a non-standard part.

R50

1R0

100

103

Ex.)

0.5pF

1.0pF

10pF

10000pF

Code Capacitance

yRated Voltage

DC2.5V

DC4V

DC6.3V

DC10V

DC16V

DC25V

DC35V

DC50V

DC100V

DC200V

DC250V

DC300V

Code Rated Voltage

DC450V

DC500V

DC630V

DC1kV

DC2kV

DC3.15kV

DC350V (for Camera Flash Circuit)

AC250V

X1/Y2; AC250V (Safety Standard Certified Type GC)

Y2, X1/Y2; AC250V (Safety Standard Certified Type GF)

Y3; AC250V (Safety Standard Certified Type GD)

X2; AC250V (Safety Standard Certified Type GB)

iCapacitance Tolerance

±0.1pF

±0.25pF

±0.5pF (10pF and below)

±0.5% (10pF and over)

±1%

±2%

±5%

±10%

±20%

±30%

Depends on individual standards.

±0.05pF

Depends on individual standards.

+80/–20%

Code Capacitance Tolerance

Code

Temperature

Characteristic Codes

Public

STD Code

Reference

Temperature

Temperature Characteristics Capacitance Change Each Temperature (%)

Capacitance Change

or Temperature

Coefficient

Operating

Temperature

Range –55°C

Max.

–25°C –10°C

Temperature

Range Min. Max. Min. Max. Min.

R *1

X5R

X7R

R *1

X8R

JIS

EIA

JIS

EIA

20°C

25°C

20°C

25°C

–55 to 125°C

–55 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 150°C

–55 to 125°C

±15%

±10% *3

+22%, –33% *4

–55 to 125°C

–55 to 85°C

–55 to 125°C

–25 to 85°C

–55 to 150°C

–55 to 125°C

*1 Capacitance change is specified with 50% rated voltage applied.

*2 Murata Temperature Characteristic Code.

*3 Apply DC350V bias.

*4 No DC bias.

Expressed by three figures.

oIndividual Specification Code (Except LLR)

oESR (LLR Only)

Code

E01

E03

E05

E07

100mΩ

220mΩ

470mΩ

1000mΩ

ESR

!0Packaging

Code

ø180mm Embossed Taping

ø180mm Paper Taping

ø180mm Paper Taping (LLL15)

ø330mm Embossed Taping

ø330mm Paper Taping

ø330mm Paper Taping (LLL15)

Bulk

Bulk Case

Bulk Tray

Packaging

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Please check the MURATA home page (http://www.murata.com/) if you cannot find the part number in the catalog.

(Part Number)

qProduct ID

wSeries

Metal Terminal Monolithic Ceramic Capacitors

KR M

Metal Terminal Monolithic Ceramic Capacitors

(DC25V to DC100V)

KR 3

Metal Terminal Monolithic Ceramic Capacitors

Large Capacitance and High Allowable Ripple

Current Type (DC250V to DC630V)

Product ID Code Series

106

H01

eChip Dimension (LgW)

Code

3.2g1.6mm

5.7g5.0mm

Chip Dimension

1206

2220

EIA

rHeight Dimension (T)

Code

1.9mm

2.7mm

2.8mm

3.7mm

4.8mm

6.4mm

Dimension (T)

uCapacitance

Expressed by three-digit alphanumerics. The unit is pico-farad

(pF). The first and second figures are significant digits, and the

third figure expresses the number of zeros that follow the two

numbers.

105

225

106

226

Ex.)

1.0μF

2.2μF

10μF

22μF

Code Capacitance

yRated Voltage

DC25V

DC50V

DC63V

DC100V

DC250V

DC450V

DC630V

Code Rated Voltage

tTemperature Characteristics

Code

Temperature Characteristic Codes Temperature Characteristics

Temperature

Range

Reference

Temperature

Coefficient

–55 to 105°C

–55 to 125°C

–55 to 85°C

–55 to 125°C

±22%

+22/–33%

±15%

X6S

X7T

X5R

X7R

–55 to 105°C

–55 to 125°C

–55 to 85°C

–55 to 125°C

25°C

EIA

Public STD Code

Operating

Temperature

Range

!0Package

Code

Kø330mm Embossed Taping

Package

iCapacitance Tolerance

Code

±10%

±20%

Capacitance Tolerance

Expressed by three figures.

oIndividual Specification Code

!Caution/Notice p118

For General Purpose GRM Series

(Less than 250Vdc) p21

Capacitor Array GNM Series p76

Low ESL LLL/LLR/LLA/LLM Series p79

High-Q Type GJM Series p82

High Frequency GQM Series p104

Monolithic Microchip GMA Series p113

For Bonding GMD Series p115

Chip Monolithic Ceramic Capacitors

Contents

Caution/Notice

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Detailed specifications sheet

Rated value

SPECIFICATIONS AND TEST METHODS

Package

Caution, Notice

(Storage, Soldering and Mounting, ....etc.)

The main products published characteristic data.

Frequency characteristics(ESR, Impedance)

S parameter(Smith chart S11)

DC bias characteristics

AC voltage characteristics

Capacitance - temperature characteristics

Calorific property by ripple current

Chart of characteristic data

SPECIFICATIONS AND TEST METHODS, Package, Chart of characteristic data,

please refer to the search for capacitor page WEB.

http://www.murata.com/products/capacitor/

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1Lineup of small size and large capacity capacitors is available.

2Since the external electrodes consist of a plated structure, the product is excellent in soldering heat resistance,

and flow (GRM18/21/31 types only) and reflow soldering can be used.

3High reliability with no polarity.

4Low impedance in high frequencies, and excellent in pulse response and noise elimination.

5The profile dimensions have been standardized with high precision, therefore high reliability can be acquired in the case of

automatic mounting.

6Paper tape or embossed tape is used for the packaging, according to the chip size.

GRM15/18/21 (T = 0.6, 1.25) can also be supplied in bulk cases.

The most widely used capacitor in the world!

Ideal capacitors can be selected from an abundant lineup.

ege

For General Purpose GRM Series (Less than 250Vdc)

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GRM Series Temperature Compensating Type Part Number List

c 0.4×0.2mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 0.2pF ±0.05pF GRM0225C1CR20WD05#

±0.1pF GRM0225C1CR20BD05#

0.3pF ±0.05pF GRM0225C1CR30WD05#

±0.1pF GRM0225C1CR30BD05#

0.4pF ±0.05pF GRM0225C1CR40WD05#

±0.1pF GRM0225C1CR40BD05#

0.5pF ±0.05pF GRM0225C1CR50WD05#

±0.1pF GRM0225C1CR50BD05#

0.6pF ±0.05pF GRM0225C1CR60WD05#

±0.1pF GRM0225C1CR60BD05#

0.7pF ±0.05pF GRM0225C1CR70WD05#

±0.1pF GRM0225C1CR70BD05#

0.8pF ±0.05pF GRM0225C1CR80WD05#

±0.1pF GRM0225C1CR80BD05#

0.9pF ±0.05pF GRM0225C1CR90WD05#

±0.1pF GRM0225C1CR90BD05#

1.0pF ±0.05pF GRM0225C1C1R0WD05#

±0.1pF GRM0225C1C1R0BD05#

±0.25pF GRM0225C1C1R0CD05#

1.1pF ±0.05pF GRM0225C1C1R1WD05#

±0.1pF GRM0225C1C1R1BD05#

±0.25pF GRM0225C1C1R1CD05#

1.2pF ±0.05pF GRM0225C1C1R2WD05#

±0.1pF GRM0225C1C1R2BD05#

±0.25pF GRM0225C1C1R2CD05#

1.3pF ±0.05pF GRM0225C1C1R3WD05#

±0.1pF GRM0225C1C1R3BD05#

±0.25pF GRM0225C1C1R3CD05#

1.4pF ±0.05pF GRM0225C1C1R4WD05#

±0.1pF GRM0225C1C1R4BD05#

±0.25pF GRM0225C1C1R4CD05#

1.5pF ±0.05pF GRM0225C1C1R5WD05#

±0.1pF GRM0225C1C1R5BD05#

±0.25pF GRM0225C1C1R5CD05#

1.6pF ±0.05pF GRM0225C1C1R6WD05#

±0.1pF GRM0225C1C1R6BD05#

±0.25pF GRM0225C1C1R6CD05#

1.7pF ±0.05pF GRM0225C1C1R7WD05#

±0.1pF GRM0225C1C1R7BD05#

±0.25pF GRM0225C1C1R7CD05#

1.8pF ±0.05pF GRM0225C1C1R8WD05#

±0.1pF GRM0225C1C1R8BD05#

±0.25pF GRM0225C1C1R8CD05#

1.9pF ±0.05pF GRM0225C1C1R9WD05#

±0.1pF GRM0225C1C1R9BD05#

±0.25pF GRM0225C1C1R9CD05#

2.0pF ±0.05pF GRM0225C1C2R0WD05#

±0.1pF GRM0225C1C2R0BD05#

±0.25pF GRM0225C1C2R0CD05#

2.1pF ±0.05pF GRM0225C1C2R1WD05#

±0.1pF GRM0225C1C2R1BD05#

±0.25pF GRM0225C1C2R1CD05#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 2.2pF ±0.05pF GRM0225C1C2R2WD05#

±0.1pF GRM0225C1C2R2BD05#

±0.25pF GRM0225C1C2R2CD05#

2.3pF ±0.05pF GRM0225C1C2R3WD05#

±0.1pF GRM0225C1C2R3BD05#

±0.25pF GRM0225C1C2R3CD05#

2.4pF ±0.05pF GRM0225C1C2R4WD05#

±0.1pF GRM0225C1C2R4BD05#

±0.25pF GRM0225C1C2R4CD05#

2.5pF ±0.05pF GRM0225C1C2R5WD05#

±0.1pF GRM0225C1C2R5BD05#

±0.25pF GRM0225C1C2R5CD05#

2.6pF ±0.05pF GRM0225C1C2R6WD05#

±0.1pF GRM0225C1C2R6BD05#

±0.25pF GRM0225C1C2R6CD05#

2.7pF ±0.05pF GRM0225C1C2R7WD05#

±0.1pF GRM0225C1C2R7BD05#

±0.25pF GRM0225C1C2R7CD05#

2.8pF ±0.05pF GRM0225C1C2R8WD05#

±0.1pF GRM0225C1C2R8BD05#

±0.25pF GRM0225C1C2R8CD05#

2.9pF ±0.05pF GRM0225C1C2R9WD05#

±0.1pF GRM0225C1C2R9BD05#

±0.25pF GRM0225C1C2R9CD05#

3.0pF ±0.05pF GRM0225C1C3R0WD05#

±0.1pF GRM0225C1C3R0BD05#

±0.25pF GRM0225C1C3R0CD05#

3.1pF ±0.05pF GRM0225C1C3R1WD05#

±0.1pF GRM0225C1C3R1BD05#

±0.25pF GRM0225C1C3R1CD05#

3.2pF ±0.05pF GRM0225C1C3R2WD05#

±0.1pF GRM0225C1C3R2BD05#

±0.25pF GRM0225C1C3R2CD05#

3.3pF ±0.05pF GRM0225C1C3R3WD05#

±0.1pF GRM0225C1C3R3BD05#

±0.25pF GRM0225C1C3R3CD05#

3.4pF ±0.05pF GRM0225C1C3R4WD05#

±0.1pF GRM0225C1C3R4BD05#

±0.25pF GRM0225C1C3R4CD05#

3.5pF ±0.05pF GRM0225C1C3R5WD05#

±0.1pF GRM0225C1C3R5BD05#

±0.25pF GRM0225C1C3R5CD05#

3.6pF ±0.05pF GRM0225C1C3R6WD05#

±0.1pF GRM0225C1C3R6BD05#

±0.25pF GRM0225C1C3R6CD05#

3.7pF ±0.05pF GRM0225C1C3R7WD05#

±0.1pF GRM0225C1C3R7BD05#

±0.25pF GRM0225C1C3R7CD05#

3.8pF ±0.05pF GRM0225C1C3R8WD05#

±0.1pF GRM0225C1C3R8BD05#

±0.25pF GRM0225C1C3R8CD05#

3.9pF ±0.05pF GRM0225C1C3R9WD05#

±0.1pF GRM0225C1C3R9BD05#

±0.25pF GRM0225C1C3R9CD05#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 4.0pF ±0.05pF GRM0225C1C4R0WD05#

±0.1pF GRM0225C1C4R0BD05#

±0.25pF GRM0225C1C4R0CD05#

4.1pF ±0.05pF GRM0225C1C4R1WD05#

±0.1pF GRM0225C1C4R1BD05#

±0.25pF GRM0225C1C4R1CD05#

4.2pF ±0.05pF GRM0225C1C4R2WD05#

±0.1pF GRM0225C1C4R2BD05#

±0.25pF GRM0225C1C4R2CD05#

4.3pF ±0.05pF GRM0225C1C4R3WD05#

±0.1pF GRM0225C1C4R3BD05#

±0.25pF GRM0225C1C4R3CD05#

4.4pF ±0.05pF GRM0225C1C4R4WD05#

±0.1pF GRM0225C1C4R4BD05#

±0.25pF GRM0225C1C4R4CD05#

4.5pF ±0.05pF GRM0225C1C4R5WD05#

±0.1pF GRM0225C1C4R5BD05#

±0.25pF GRM0225C1C4R5CD05#

4.6pF ±0.05pF GRM0225C1C4R6WD05#

±0.1pF GRM0225C1C4R6BD05#

±0.25pF GRM0225C1C4R6CD05#

4.7pF ±0.05pF GRM0225C1C4R7WD05#

±0.1pF GRM0225C1C4R7BD05#

±0.25pF GRM0225C1C4R7CD05#

4.8pF ±0.05pF GRM0225C1C4R8WD05#

±0.1pF GRM0225C1C4R8BD05#

±0.25pF GRM0225C1C4R8CD05#

4.9pF ±0.05pF GRM0225C1C4R9WD05#

±0.1pF GRM0225C1C4R9BD05#

±0.25pF GRM0225C1C4R9CD05#

5.0pF ±0.05pF GRM0225C1C5R0WD05#

±0.1pF GRM0225C1C5R0BD05#

±0.25pF GRM0225C1C5R0CD05#

5.1pF ±0.05pF GRM0225C1C5R1WD05#

±0.1pF GRM0225C1C5R1BD05#

±0.25pF GRM0225C1C5R1CD05#

±0.5pF GRM0225C1C5R1DD05#

5.2pF ±0.05pF GRM0225C1C5R2WD05#

±0.1pF GRM0225C1C5R2BD05#

±0.25pF GRM0225C1C5R2CD05#

±0.5pF GRM0225C1C5R2DD05#

5.3pF ±0.05pF GRM0225C1C5R3WD05#

±0.1pF GRM0225C1C5R3BD05#

±0.25pF GRM0225C1C5R3CD05#

±0.5pF GRM0225C1C5R3DD05#

5.4pF ±0.05pF GRM0225C1C5R4WD05#

±0.1pF GRM0225C1C5R4BD05#

±0.25pF GRM0225C1C5R4CD05#

±0.5pF GRM0225C1C5R4DD05#

5.5pF ±0.05pF GRM0225C1C5R5WD05#

±0.1pF GRM0225C1C5R5BD05#

±0.25pF GRM0225C1C5R5CD05#

±0.5pF GRM0225C1C5R5DD05#

5.6pF ±0.05pF GRM0225C1C5R6WD05#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 5.6pF ±0.1pF GRM0225C1C5R6BD05#

±0.25pF GRM0225C1C5R6CD05#

±0.5pF GRM0225C1C5R6DD05#

5.7pF ±0.05pF GRM0225C1C5R7WD05#

±0.1pF GRM0225C1C5R7BD05#

±0.25pF GRM0225C1C5R7CD05#

±0.5pF GRM0225C1C5R7DD05#

5.8pF ±0.05pF GRM0225C1C5R8WD05#

±0.1pF GRM0225C1C5R8BD05#

±0.25pF GRM0225C1C5R8CD05#

±0.5pF GRM0225C1C5R8DD05#

5.9pF ±0.05pF GRM0225C1C5R9WD05#

±0.1pF GRM0225C1C5R9BD05#

±0.25pF GRM0225C1C5R9CD05#

±0.5pF GRM0225C1C5R9DD05#

6.0pF ±0.05pF GRM0225C1C6R0WD05#

±0.1pF GRM0225C1C6R0BD05#

±0.25pF GRM0225C1C6R0CD05#

±0.5pF GRM0225C1C6R0DD05#

6.1pF ±0.05pF GRM0225C1C6R1WD05#

±0.1pF GRM0225C1C6R1BD05#

±0.25pF GRM0225C1C6R1CD05#

±0.5pF GRM0225C1C6R1DD05#

6.2pF ±0.05pF GRM0225C1C6R2WD05#

±0.1pF GRM0225C1C6R2BD05#

±0.25pF GRM0225C1C6R2CD05#

±0.5pF GRM0225C1C6R2DD05#

6.3pF ±0.05pF GRM0225C1C6R3WD05#

±0.1pF GRM0225C1C6R3BD05#

±0.25pF GRM0225C1C6R3CD05#

±0.5pF GRM0225C1C6R3DD05#

6.4pF ±0.05pF GRM0225C1C6R4WD05#

±0.1pF GRM0225C1C6R4BD05#

±0.25pF GRM0225C1C6R4CD05#

±0.5pF GRM0225C1C6R4DD05#

6.5pF ±0.05pF GRM0225C1C6R5WD05#

±0.1pF GRM0225C1C6R5BD05#

±0.25pF GRM0225C1C6R5CD05#

±0.5pF GRM0225C1C6R5DD05#

6.6pF ±0.05pF GRM0225C1C6R6WD05#

±0.1pF GRM0225C1C6R6BD05#

±0.25pF GRM0225C1C6R6CD05#

±0.5pF GRM0225C1C6R6DD05#

6.7pF ±0.05pF GRM0225C1C6R7WD05#

±0.1pF GRM0225C1C6R7BD05#

±0.25pF GRM0225C1C6R7CD05#

±0.5pF GRM0225C1C6R7DD05#

6.8pF ±0.05pF GRM0225C1C6R8WD05#

±0.1pF GRM0225C1C6R8BD05#

±0.25pF GRM0225C1C6R8CD05#

±0.5pF GRM0225C1C6R8DD05#

6.9pF ±0.05pF GRM0225C1C6R9WD05#

±0.1pF GRM0225C1C6R9BD05#

±0.25pF GRM0225C1C6R9CD05#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 6.9pF ±0.5pF GRM0225C1C6R9DD05#

7.0pF ±0.05pF GRM0225C1C7R0WD05#

±0.1pF GRM0225C1C7R0BD05#

±0.25pF GRM0225C1C7R0CD05#

±0.5pF GRM0225C1C7R0DD05#

7.1pF ±0.05pF GRM0225C1C7R1WD05#

±0.1pF GRM0225C1C7R1BD05#

±0.25pF GRM0225C1C7R1CD05#

±0.5pF GRM0225C1C7R1DD05#

7.2pF ±0.05pF GRM0225C1C7R2WD05#

±0.1pF GRM0225C1C7R2BD05#

±0.25pF GRM0225C1C7R2CD05#

±0.5pF GRM0225C1C7R2DD05#

7.3pF ±0.05pF GRM0225C1C7R3WD05#

±0.1pF GRM0225C1C7R3BD05#

±0.25pF GRM0225C1C7R3CD05#

±0.5pF GRM0225C1C7R3DD05#

7.4pF ±0.05pF GRM0225C1C7R4WD05#

±0.1pF GRM0225C1C7R4BD05#

±0.25pF GRM0225C1C7R4CD05#

±0.5pF GRM0225C1C7R4DD05#

7.5pF ±0.05pF GRM0225C1C7R5WD05#

±0.1pF GRM0225C1C7R5BD05#

±0.25pF GRM0225C1C7R5CD05#

±0.5pF GRM0225C1C7R5DD05#

7.6pF ±0.05pF GRM0225C1C7R6WD05#

±0.1pF GRM0225C1C7R6BD05#

±0.25pF GRM0225C1C7R6CD05#

±0.5pF GRM0225C1C7R6DD05#

7.7pF ±0.05pF GRM0225C1C7R7WD05#

±0.1pF GRM0225C1C7R7BD05#

±0.25pF GRM0225C1C7R7CD05#

±0.5pF GRM0225C1C7R7DD05#

7.8pF ±0.05pF GRM0225C1C7R8WD05#

±0.1pF GRM0225C1C7R8BD05#

±0.25pF GRM0225C1C7R8CD05#

±0.5pF GRM0225C1C7R8DD05#

7.9pF ±0.05pF GRM0225C1C7R9WD05#

±0.1pF GRM0225C1C7R9BD05#

±0.25pF GRM0225C1C7R9CD05#

±0.5pF GRM0225C1C7R9DD05#

8.0pF ±0.05pF GRM0225C1C8R0WD05#

±0.1pF GRM0225C1C8R0BD05#

±0.25pF GRM0225C1C8R0CD05#

±0.5pF GRM0225C1C8R0DD05#

8.1pF ±0.05pF GRM0225C1C8R1WD05#

±0.1pF GRM0225C1C8R1BD05#

±0.25pF GRM0225C1C8R1CD05#

±0.5pF GRM0225C1C8R1DD05#

8.2pF ±0.05pF GRM0225C1C8R2WD05#

±0.1pF GRM0225C1C8R2BD05#

±0.25pF GRM0225C1C8R2CD05#

±0.5pF GRM0225C1C8R2DD05#

8.3pF ±0.05pF GRM0225C1C8R3WD05#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 8.3pF ±0.1pF GRM0225C1C8R3BD05#

±0.25pF GRM0225C1C8R3CD05#

±0.5pF GRM0225C1C8R3DD05#

8.4pF ±0.05pF GRM0225C1C8R4WD05#

±0.1pF GRM0225C1C8R4BD05#

±0.25pF GRM0225C1C8R4CD05#

±0.5pF GRM0225C1C8R4DD05#

8.5pF ±0.05pF GRM0225C1C8R5WD05#

±0.1pF GRM0225C1C8R5BD05#

±0.25pF GRM0225C1C8R5CD05#

±0.5pF GRM0225C1C8R5DD05#

8.6pF ±0.05pF GRM0225C1C8R6WD05#

±0.1pF GRM0225C1C8R6BD05#

±0.25pF GRM0225C1C8R6CD05#

±0.5pF GRM0225C1C8R6DD05#

8.7pF ±0.05pF GRM0225C1C8R7WD05#

±0.1pF GRM0225C1C8R7BD05#

±0.25pF GRM0225C1C8R7CD05#

±0.5pF GRM0225C1C8R7DD05#

8.8pF ±0.05pF GRM0225C1C8R8WD05#

±0.1pF GRM0225C1C8R8BD05#

±0.25pF GRM0225C1C8R8CD05#

±0.5pF GRM0225C1C8R8DD05#

8.9pF ±0.05pF GRM0225C1C8R9WD05#

±0.1pF GRM0225C1C8R9BD05#

±0.25pF GRM0225C1C8R9CD05#

±0.5pF GRM0225C1C8R9DD05#

9.0pF ±0.05pF GRM0225C1C9R0WD05#

±0.1pF GRM0225C1C9R0BD05#

±0.25pF GRM0225C1C9R0CD05#

±0.5pF GRM0225C1C9R0DD05#

9.1pF ±0.05pF GRM0225C1C9R1WD05#

±0.1pF GRM0225C1C9R1BD05#

±0.25pF GRM0225C1C9R1CD05#

±0.5pF GRM0225C1C9R1DD05#

9.2pF ±0.05pF GRM0225C1C9R2WD05#

±0.1pF GRM0225C1C9R2BD05#

±0.25pF GRM0225C1C9R2CD05#

±0.5pF GRM0225C1C9R2DD05#

9.3pF ±0.05pF GRM0225C1C9R3WD05#

±0.1pF GRM0225C1C9R3BD05#

±0.25pF GRM0225C1C9R3CD05#

±0.5pF GRM0225C1C9R3DD05#

9.4pF ±0.05pF GRM0225C1C9R4WD05#

±0.1pF GRM0225C1C9R4BD05#

±0.25pF GRM0225C1C9R4CD05#

±0.5pF GRM0225C1C9R4DD05#

9.5pF ±0.05pF GRM0225C1C9R5WD05#

±0.1pF GRM0225C1C9R5BD05#

±0.25pF GRM0225C1C9R5CD05#

±0.5pF GRM0225C1C9R5DD05#

9.6pF ±0.05pF GRM0225C1C9R6WD05#

±0.1pF GRM0225C1C9R6BD05#

±0.25pF GRM0225C1C9R6CD05#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 9.6pF ±0.5pF GRM0225C1C9R6DD05#

9.7pF ±0.05pF GRM0225C1C9R7WD05#

±0.1pF GRM0225C1C9R7BD05#

±0.25pF GRM0225C1C9R7CD05#

±0.5pF GRM0225C1C9R7DD05#

9.8pF ±0.05pF GRM0225C1C9R8WD05#

±0.1pF GRM0225C1C9R8BD05#

±0.25pF GRM0225C1C9R8CD05#

±0.5pF GRM0225C1C9R8DD05#

9.9pF ±0.05pF GRM0225C1C9R9WD05#

±0.1pF GRM0225C1C9R9BD05#

±0.25pF GRM0225C1C9R9CD05#

±0.5pF GRM0225C1C9R9DD05#

10pF ±2% GRM0225C1C100GD05#

±5% GRM0225C1C100JD05#

12pF ±2% GRM0225C1C120GD05#

±5% GRM0225C1C120JD05#

15pF ±2% GRM0225C1C150GD05#

±5% GRM0225C1C150JD05#

18pF ±2% GRM0225C1C180GD05#

±5% GRM0225C1C180JD05#

22pF ±2% GRM0225C1C220GD05#

±5% GRM0225C1C220JD05#

27pF ±2% GRM0225C1C270GD05#

±5% GRM0225C1C270JD05#

33pF ±2% GRM0225C1C330GD05#

±5% GRM0225C1C330JD05#

39pF ±2% GRM0225C1C390GD05#

±5% GRM0225C1C390JD05#

47pF ±2% GRM0225C1C470GD05#

±5% GRM0225C1C470JD05#

CK 0.2pF ±0.05pF GRM0224C1CR20WD05#

±0.1pF GRM0224C1CR20BD05#

0.3pF ±0.05pF GRM0224C1CR30WD05#

±0.1pF GRM0224C1CR30BD05#

0.4pF ±0.05pF GRM0224C1CR40WD05#

±0.1pF GRM0224C1CR40BD05#

0.5pF ±0.05pF GRM0224C1CR50WD05#

±0.1pF GRM0224C1CR50BD05#

0.6pF ±0.05pF GRM0224C1CR60WD05#

±0.1pF GRM0224C1CR60BD05#

0.7pF ±0.05pF GRM0224C1CR70WD05#

±0.1pF GRM0224C1CR70BD05#

0.8pF ±0.05pF GRM0224C1CR80WD05#

±0.1pF GRM0224C1CR80BD05#

0.9pF ±0.05pF GRM0224C1CR90WD05#

±0.1pF GRM0224C1CR90BD05#

1.0pF ±0.05pF GRM0224C1C1R0WD05#

±0.1pF GRM0224C1C1R0BD05#

±0.25pF GRM0224C1C1R0CD05#

1.1pF ±0.05pF GRM0224C1C1R1WD05#

±0.1pF GRM0224C1C1R1BD05#

±0.25pF GRM0224C1C1R1CD05#

1.2pF ±0.05pF GRM0224C1C1R2WD05#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CK 1.2pF ±0.1pF GRM0224C1C1R2BD05#

±0.25pF GRM0224C1C1R2CD05#

1.3pF ±0.05pF GRM0224C1C1R3WD05#

±0.1pF GRM0224C1C1R3BD05#

±0.25pF GRM0224C1C1R3CD05#

1.4pF ±0.05pF GRM0224C1C1R4WD05#

±0.1pF GRM0224C1C1R4BD05#

±0.25pF GRM0224C1C1R4CD05#

1.5pF ±0.05pF GRM0224C1C1R5WD05#

±0.1pF GRM0224C1C1R5BD05#

±0.25pF GRM0224C1C1R5CD05#

1.6pF ±0.05pF GRM0224C1C1R6WD05#

±0.1pF GRM0224C1C1R6BD05#

±0.25pF GRM0224C1C1R6CD05#

1.7pF ±0.05pF GRM0224C1C1R7WD05#

±0.1pF GRM0224C1C1R7BD05#

±0.25pF GRM0224C1C1R7CD05#

1.8pF ±0.05pF GRM0224C1C1R8WD05#

±0.1pF GRM0224C1C1R8BD05#

±0.25pF GRM0224C1C1R8CD05#

1.9pF ±0.05pF GRM0224C1C1R9WD05#

±0.1pF GRM0224C1C1R9BD05#

±0.25pF GRM0224C1C1R9CD05#

2.0pF ±0.05pF GRM0224C1C2R0WD05#

±0.1pF GRM0224C1C2R0BD05#

±0.25pF GRM0224C1C2R0CD05#

CJ 2.1pF ±0.05pF GRM0223C1C2R1WD05#

±0.1pF GRM0223C1C2R1BD05#

±0.25pF GRM0223C1C2R1CD05#

2.2pF ±0.05pF GRM0223C1C2R2WD05#

±0.1pF GRM0223C1C2R2BD05#

±0.25pF GRM0223C1C2R2CD05#

2.3pF ±0.05pF GRM0223C1C2R3WD05#

±0.1pF GRM0223C1C2R3BD05#

±0.25pF GRM0223C1C2R3CD05#

2.4pF ±0.05pF GRM0223C1C2R4WD05#

±0.1pF GRM0223C1C2R4BD05#

±0.25pF GRM0223C1C2R4CD05#

2.5pF ±0.05pF GRM0223C1C2R5WD05#

±0.1pF GRM0223C1C2R5BD05#

±0.25pF GRM0223C1C2R5CD05#

2.6pF ±0.05pF GRM0223C1C2R6WD05#

±0.1pF GRM0223C1C2R6BD05#

±0.25pF GRM0223C1C2R6CD05#

2.7pF ±0.05pF GRM0223C1C2R7WD05#

±0.1pF GRM0223C1C2R7BD05#

±0.25pF GRM0223C1C2R7CD05#

2.8pF ±0.05pF GRM0223C1C2R8WD05#

±0.1pF GRM0223C1C2R8BD05#

±0.25pF GRM0223C1C2R8CD05#

2.9pF ±0.05pF GRM0223C1C2R9WD05#

±0.1pF GRM0223C1C2R9BD05#

±0.25pF GRM0223C1C2R9CD05#

3.0pF ±0.05pF GRM0223C1C3R0WD05#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CJ 3.0pF ±0.1pF GRM0223C1C3R0BD05#

±0.25pF GRM0223C1C3R0CD05#

3.1pF ±0.05pF GRM0223C1C3R1WD05#

±0.1pF GRM0223C1C3R1BD05#

±0.25pF GRM0223C1C3R1CD05#

3.2pF ±0.05pF GRM0223C1C3R2WD05#

±0.1pF GRM0223C1C3R2BD05#

±0.25pF GRM0223C1C3R2CD05#

3.3pF ±0.05pF GRM0223C1C3R3WD05#

±0.1pF GRM0223C1C3R3BD05#

±0.25pF GRM0223C1C3R3CD05#

3.4pF ±0.05pF GRM0223C1C3R4WD05#

±0.1pF GRM0223C1C3R4BD05#

±0.25pF GRM0223C1C3R4CD05#

3.5pF ±0.05pF GRM0223C1C3R5WD05#

±0.1pF GRM0223C1C3R5BD05#

±0.25pF GRM0223C1C3R5CD05#

3.6pF ±0.05pF GRM0223C1C3R6WD05#

±0.1pF GRM0223C1C3R6BD05#

±0.25pF GRM0223C1C3R6CD05#

3.7pF ±0.05pF GRM0223C1C3R7WD05#

±0.1pF GRM0223C1C3R7BD05#

±0.25pF GRM0223C1C3R7CD05#

3.8pF ±0.05pF GRM0223C1C3R8WD05#

±0.1pF GRM0223C1C3R8BD05#

±0.25pF GRM0223C1C3R8CD05#

3.9pF ±0.05pF GRM0223C1C3R9WD05#

±0.1pF GRM0223C1C3R9BD05#

±0.25pF GRM0223C1C3R9CD05#

CH 4.0pF ±0.05pF GRM0222C1C4R0WD05#

±0.1pF GRM0222C1C4R0BD05#

±0.25pF GRM0222C1C4R0CD05#

4.1pF ±0.05pF GRM0222C1C4R1WD05#

±0.1pF GRM0222C1C4R1BD05#

±0.25pF GRM0222C1C4R1CD05#

4.2pF ±0.05pF GRM0222C1C4R2WD05#

±0.1pF GRM0222C1C4R2BD05#

±0.25pF GRM0222C1C4R2CD05#

4.3pF ±0.05pF GRM0222C1C4R3WD05#

±0.1pF GRM0222C1C4R3BD05#

±0.25pF GRM0222C1C4R3CD05#

4.4pF ±0.05pF GRM0222C1C4R4WD05#

±0.1pF GRM0222C1C4R4BD05#

±0.25pF GRM0222C1C4R4CD05#

4.5pF ±0.05pF GRM0222C1C4R5WD05#

±0.1pF GRM0222C1C4R5BD05#

±0.25pF GRM0222C1C4R5CD05#

4.6pF ±0.05pF GRM0222C1C4R6WD05#

±0.1pF GRM0222C1C4R6BD05#

±0.25pF GRM0222C1C4R6CD05#

4.7pF ±0.05pF GRM0222C1C4R7WD05#

±0.1pF GRM0222C1C4R7BD05#

±0.25pF GRM0222C1C4R7CD05#

4.8pF ±0.05pF GRM0222C1C4R8WD05#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 4.8pF ±0.1pF GRM0222C1C4R8BD05#

±0.25pF GRM0222C1C4R8CD05#

4.9pF ±0.05pF GRM0222C1C4R9WD05#

±0.1pF GRM0222C1C4R9BD05#

±0.25pF GRM0222C1C4R9CD05#

5.0pF ±0.05pF GRM0222C1C5R0WD05#

±0.1pF GRM0222C1C5R0BD05#

±0.25pF GRM0222C1C5R0CD05#

5.1pF ±0.05pF GRM0222C1C5R1WD05#

±0.1pF GRM0222C1C5R1BD05#

±0.25pF GRM0222C1C5R1CD05#

±0.5pF GRM0222C1C5R1DD05#

5.2pF ±0.05pF GRM0222C1C5R2WD05#

±0.1pF GRM0222C1C5R2BD05#

±0.25pF GRM0222C1C5R2CD05#

±0.5pF GRM0222C1C5R2DD05#

5.3pF ±0.05pF GRM0222C1C5R3WD05#

±0.1pF GRM0222C1C5R3BD05#

±0.25pF GRM0222C1C5R3CD05#

±0.5pF GRM0222C1C5R3DD05#

5.4pF ±0.05pF GRM0222C1C5R4WD05#

±0.1pF GRM0222C1C5R4BD05#

±0.25pF GRM0222C1C5R4CD05#

±0.5pF GRM0222C1C5R4DD05#

5.5pF ±0.05pF GRM0222C1C5R5WD05#

±0.1pF GRM0222C1C5R5BD05#

±0.25pF GRM0222C1C5R5CD05#

±0.5pF GRM0222C1C5R5DD05#

5.6pF ±0.05pF GRM0222C1C5R6WD05#

±0.1pF GRM0222C1C5R6BD05#

±0.25pF GRM0222C1C5R6CD05#

±0.5pF GRM0222C1C5R6DD05#

5.7pF ±0.05pF GRM0222C1C5R7WD05#

±0.1pF GRM0222C1C5R7BD05#

±0.25pF GRM0222C1C5R7CD05#

±0.5pF GRM0222C1C5R7DD05#

5.8pF ±0.05pF GRM0222C1C5R8WD05#

±0.1pF GRM0222C1C5R8BD05#

±0.25pF GRM0222C1C5R8CD05#

±0.5pF GRM0222C1C5R8DD05#

5.9pF ±0.05pF GRM0222C1C5R9WD05#

±0.1pF GRM0222C1C5R9BD05#

±0.25pF GRM0222C1C5R9CD05#

±0.5pF GRM0222C1C5R9DD05#

6.0pF ±0.05pF GRM0222C1C6R0WD05#

±0.1pF GRM0222C1C6R0BD05#

±0.25pF GRM0222C1C6R0CD05#

±0.5pF GRM0222C1C6R0DD05#

6.1pF ±0.05pF GRM0222C1C6R1WD05#

±0.1pF GRM0222C1C6R1BD05#

±0.25pF GRM0222C1C6R1CD05#

±0.5pF GRM0222C1C6R1DD05#

6.2pF ±0.05pF GRM0222C1C6R2WD05#

±0.1pF GRM0222C1C6R2BD05#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 6.2pF ±0.25pF GRM0222C1C6R2CD05#

±0.5pF GRM0222C1C6R2DD05#

6.3pF ±0.05pF GRM0222C1C6R3WD05#

±0.1pF GRM0222C1C6R3BD05#

±0.25pF GRM0222C1C6R3CD05#

±0.5pF GRM0222C1C6R3DD05#

6.4pF ±0.05pF GRM0222C1C6R4WD05#

±0.1pF GRM0222C1C6R4BD05#

±0.25pF GRM0222C1C6R4CD05#

±0.5pF GRM0222C1C6R4DD05#

6.5pF ±0.05pF GRM0222C1C6R5WD05#

±0.1pF GRM0222C1C6R5BD05#

±0.25pF GRM0222C1C6R5CD05#

±0.5pF GRM0222C1C6R5DD05#

6.6pF ±0.05pF GRM0222C1C6R6WD05#

±0.1pF GRM0222C1C6R6BD05#

±0.25pF GRM0222C1C6R6CD05#

±0.5pF GRM0222C1C6R6DD05#

6.7pF ±0.05pF GRM0222C1C6R7WD05#

±0.1pF GRM0222C1C6R7BD05#

±0.25pF GRM0222C1C6R7CD05#

±0.5pF GRM0222C1C6R7DD05#

6.8pF ±0.05pF GRM0222C1C6R8WD05#

±0.1pF GRM0222C1C6R8BD05#

±0.25pF GRM0222C1C6R8CD05#

±0.5pF GRM0222C1C6R8DD05#

6.9pF ±0.05pF GRM0222C1C6R9WD05#

±0.1pF GRM0222C1C6R9BD05#

±0.25pF GRM0222C1C6R9CD05#

±0.5pF GRM0222C1C6R9DD05#

7.0pF ±0.05pF GRM0222C1C7R0WD05#

±0.1pF GRM0222C1C7R0BD05#

±0.25pF GRM0222C1C7R0CD05#

±0.5pF GRM0222C1C7R0DD05#

7.1pF ±0.05pF GRM0222C1C7R1WD05#

±0.1pF GRM0222C1C7R1BD05#

±0.25pF GRM0222C1C7R1CD05#

±0.5pF GRM0222C1C7R1DD05#

7.2pF ±0.05pF GRM0222C1C7R2WD05#

±0.1pF GRM0222C1C7R2BD05#

±0.25pF GRM0222C1C7R2CD05#

±0.5pF GRM0222C1C7R2DD05#

7.3pF ±0.05pF GRM0222C1C7R3WD05#

±0.1pF GRM0222C1C7R3BD05#

±0.25pF GRM0222C1C7R3CD05#

±0.5pF GRM0222C1C7R3DD05#

7.4pF ±0.05pF GRM0222C1C7R4WD05#

±0.1pF GRM0222C1C7R4BD05#

±0.25pF GRM0222C1C7R4CD05#

±0.5pF GRM0222C1C7R4DD05#

7.5pF ±0.05pF GRM0222C1C7R5WD05#

±0.1pF GRM0222C1C7R5BD05#

±0.25pF GRM0222C1C7R5CD05#

±0.5pF GRM0222C1C7R5DD05#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 7.6pF ±0.05pF GRM0222C1C7R6WD05#

±0.1pF GRM0222C1C7R6BD05#

±0.25pF GRM0222C1C7R6CD05#

±0.5pF GRM0222C1C7R6DD05#

7.7pF ±0.05pF GRM0222C1C7R7WD05#

±0.1pF GRM0222C1C7R7BD05#

±0.25pF GRM0222C1C7R7CD05#

±0.5pF GRM0222C1C7R7DD05#

7.8pF ±0.05pF GRM0222C1C7R8WD05#

±0.1pF GRM0222C1C7R8BD05#

±0.25pF GRM0222C1C7R8CD05#

±0.5pF GRM0222C1C7R8DD05#

7.9pF ±0.05pF GRM0222C1C7R9WD05#

±0.1pF GRM0222C1C7R9BD05#

±0.25pF GRM0222C1C7R9CD05#

±0.5pF GRM0222C1C7R9DD05#

8.0pF ±0.05pF GRM0222C1C8R0WD05#

±0.1pF GRM0222C1C8R0BD05#

±0.25pF GRM0222C1C8R0CD05#

±0.5pF GRM0222C1C8R0DD05#

8.1pF ±0.05pF GRM0222C1C8R1WD05#

±0.1pF GRM0222C1C8R1BD05#

±0.25pF GRM0222C1C8R1CD05#

±0.5pF GRM0222C1C8R1DD05#

8.2pF ±0.05pF GRM0222C1C8R2WD05#

±0.1pF GRM0222C1C8R2BD05#

±0.25pF GRM0222C1C8R2CD05#

±0.5pF GRM0222C1C8R2DD05#

8.3pF ±0.05pF GRM0222C1C8R3WD05#

±0.1pF GRM0222C1C8R3BD05#

±0.25pF GRM0222C1C8R3CD05#

±0.5pF GRM0222C1C8R3DD05#

8.4pF ±0.05pF GRM0222C1C8R4WD05#

±0.1pF GRM0222C1C8R4BD05#

±0.25pF GRM0222C1C8R4CD05#

±0.5pF GRM0222C1C8R4DD05#

8.5pF ±0.05pF GRM0222C1C8R5WD05#

±0.1pF GRM0222C1C8R5BD05#

±0.25pF GRM0222C1C8R5CD05#

±0.5pF GRM0222C1C8R5DD05#

8.6pF ±0.05pF GRM0222C1C8R6WD05#

±0.1pF GRM0222C1C8R6BD05#

±0.25pF GRM0222C1C8R6CD05#

±0.5pF GRM0222C1C8R6DD05#

8.7pF ±0.05pF GRM0222C1C8R7WD05#

±0.1pF GRM0222C1C8R7BD05#

±0.25pF GRM0222C1C8R7CD05#

±0.5pF GRM0222C1C8R7DD05#

8.8pF ±0.05pF GRM0222C1C8R8WD05#

±0.1pF GRM0222C1C8R8BD05#

±0.25pF GRM0222C1C8R8CD05#

±0.5pF GRM0222C1C8R8DD05#

8.9pF ±0.05pF GRM0222C1C8R9WD05#

±0.1pF GRM0222C1C8R9BD05#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 8.9pF ±0.25pF GRM0222C1C8R9CD05#

±0.5pF GRM0222C1C8R9DD05#

9.0pF ±0.05pF GRM0222C1C9R0WD05#

±0.1pF GRM0222C1C9R0BD05#

±0.25pF GRM0222C1C9R0CD05#

±0.5pF GRM0222C1C9R0DD05#

9.1pF ±0.05pF GRM0222C1C9R1WD05#

±0.1pF GRM0222C1C9R1BD05#

±0.25pF GRM0222C1C9R1CD05#

±0.5pF GRM0222C1C9R1DD05#

9.2pF ±0.05pF GRM0222C1C9R2WD05#

±0.1pF GRM0222C1C9R2BD05#

±0.25pF GRM0222C1C9R2CD05#

±0.5pF GRM0222C1C9R2DD05#

9.3pF ±0.05pF GRM0222C1C9R3WD05#

±0.1pF GRM0222C1C9R3BD05#

±0.25pF GRM0222C1C9R3CD05#

±0.5pF GRM0222C1C9R3DD05#

9.4pF ±0.05pF GRM0222C1C9R4WD05#

±0.1pF GRM0222C1C9R4BD05#

±0.25pF GRM0222C1C9R4CD05#

±0.5pF GRM0222C1C9R4DD05#

9.5pF ±0.05pF GRM0222C1C9R5WD05#

±0.1pF GRM0222C1C9R5BD05#

±0.25pF GRM0222C1C9R5CD05#

±0.5pF GRM0222C1C9R5DD05#

9.6pF ±0.05pF GRM0222C1C9R6WD05#

±0.1pF GRM0222C1C9R6BD05#

±0.25pF GRM0222C1C9R6CD05#

±0.5pF GRM0222C1C9R6DD05#

9.7pF ±0.05pF GRM0222C1C9R7WD05#

±0.1pF GRM0222C1C9R7BD05#

±0.25pF GRM0222C1C9R7CD05#

±0.5pF GRM0222C1C9R7DD05#

9.8pF ±0.05pF GRM0222C1C9R8WD05#

±0.1pF GRM0222C1C9R8BD05#

±0.25pF GRM0222C1C9R8CD05#

±0.5pF GRM0222C1C9R8DD05#

9.9pF ±0.05pF GRM0222C1C9R9WD05#

±0.1pF GRM0222C1C9R9BD05#

±0.25pF GRM0222C1C9R9CD05#

±0.5pF GRM0222C1C9R9DD05#

10pF ±2% GRM0222C1C100GD05#

±5% GRM0222C1C100JD05#

12pF ±2% GRM0222C1C120GD05#

±5% GRM0222C1C120JD05#

15pF ±2% GRM0222C1C150GD05#

±5% GRM0222C1C150JD05#

18pF ±2% GRM0222C1C180GD05#

±5% GRM0222C1C180JD05#

22pF ±2% GRM0222C1C220GD05#

±5% GRM0222C1C220JD05#

27pF ±2% GRM0222C1C270GD05#

±5% GRM0222C1C270JD05#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 33pF ±2% GRM0222C1C330GD05#

±5% GRM0222C1C330JD05#

39pF ±2% GRM0222C1C390GD05#

±5% GRM0222C1C390JD05#

47pF ±2% GRM0222C1C470GD05#

±5% GRM0222C1C470JD05#

10Vdc C0G 56pF ±2% GRM0225C1A560GD05#

±5% GRM0225C1A560JD05#

68pF ±2% GRM0225C1A680GD05#

±5% GRM0225C1A680JD05#

82pF ±2% GRM0225C1A820GD05#

±5% GRM0225C1A820JD05#

100pF ±2% GRM0225C1A101GD05#

±5% GRM0225C1A101JD05#

CH 56pF ±2% GRM0222C1A560GD05#

±5% GRM0222C1A560JD05#

68pF ±2% GRM0222C1A680GD05#

±5% GRM0222C1A680JD05#

82pF ±2% GRM0222C1A820GD05#

±5% GRM0222C1A820JD05#

100pF ±2% GRM0222C1A101GD05#

±5% GRM0222C1A101JD05#

c 0.6×0.3mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 0.1pF ±0.05pF GRM0335C1HR10WA01#

±0.1pF GRM0335C1HR10BA01#

0.2pF ±0.05pF GRM0335C1HR20WA01#

±0.1pF GRM0335C1HR20BA01#

0.3pF ±0.05pF GRM0335C1HR30WA01#

±0.1pF GRM0335C1HR30BA01#

0.4pF ±0.05pF GRM0335C1HR40WA01#

±0.1pF GRM0335C1HR40BA01#

0.5pF ±0.05pF GRM0335C1HR50WA01#

±0.1pF GRM0335C1HR50BA01#

0.6pF ±0.05pF GRM0335C1HR60WA01#

±0.1pF GRM0335C1HR60BA01#

0.7pF ±0.05pF GRM0335C1HR70WA01#

±0.1pF GRM0335C1HR70BA01#

0.8pF ±0.05pF GRM0335C1HR80WA01#

±0.1pF GRM0335C1HR80BA01#

0.9pF ±0.05pF GRM0335C1HR90WA01#

±0.1pF GRM0335C1HR90BA01#

1.0pF ±0.05pF GRM0335C1H1R0WA01#

±0.1pF GRM0335C1H1R0BA01#

±0.25pF GRM0335C1H1R0CA01#

1.1pF ±0.05pF GRM0335C1H1R1WA01#

±0.1pF GRM0335C1H1R1BA01#

±0.25pF GRM0335C1H1R1CA01#

1.2pF ±0.05pF GRM0335C1H1R2WA01#

±0.1pF GRM0335C1H1R2BA01#

±0.25pF GRM0335C1H1R2CA01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 1.3pF ±0.05pF GRM0335C1H1R3WA01#

±0.1pF GRM0335C1H1R3BA01#

±0.25pF GRM0335C1H1R3CA01#

1.4pF ±0.05pF GRM0335C1H1R4WA01#

±0.1pF GRM0335C1H1R4BA01#

±0.25pF GRM0335C1H1R4CA01#

1.5pF ±0.05pF GRM0335C1H1R5WA01#

±0.1pF GRM0335C1H1R5BA01#

±0.25pF GRM0335C1H1R5CA01#

1.6pF ±0.05pF GRM0335C1H1R6WA01#

±0.1pF GRM0335C1H1R6BA01#

±0.25pF GRM0335C1H1R6CA01#

1.7pF ±0.05pF GRM0335C1H1R7WA01#

±0.1pF GRM0335C1H1R7BA01#

±0.25pF GRM0335C1H1R7CA01#

1.8pF ±0.05pF GRM0335C1H1R8WA01#

±0.1pF GRM0335C1H1R8BA01#

±0.25pF GRM0335C1H1R8CA01#

1.9pF ±0.05pF GRM0335C1H1R9WA01#

±0.1pF GRM0335C1H1R9BA01#

±0.25pF GRM0335C1H1R9CA01#

2.0pF ±0.05pF GRM0335C1H2R0WA01#

±0.1pF GRM0335C1H2R0BA01#

±0.25pF GRM0335C1H2R0CA01#

2.1pF ±0.05pF GRM0335C1H2R1WA01#

±0.1pF GRM0335C1H2R1BA01#

±0.25pF GRM0335C1H2R1CA01#

2.2pF ±0.05pF GRM0335C1H2R2WA01#

±0.1pF GRM0335C1H2R2BA01#

±0.25pF GRM0335C1H2R2CA01#

2.3pF ±0.05pF GRM0335C1H2R3WA01#

±0.1pF GRM0335C1H2R3BA01#

±0.25pF GRM0335C1H2R3CA01#

2.4pF ±0.05pF GRM0335C1H2R4WA01#

±0.1pF GRM0335C1H2R4BA01#

±0.25pF GRM0335C1H2R4CA01#

2.5pF ±0.05pF GRM0335C1H2R5WA01#

±0.1pF GRM0335C1H2R5BA01#

±0.25pF GRM0335C1H2R5CA01#

2.6pF ±0.05pF GRM0335C1H2R6WA01#

±0.1pF GRM0335C1H2R6BA01#

±0.25pF GRM0335C1H2R6CA01#

2.7pF ±0.05pF GRM0335C1H2R7WA01#

±0.1pF GRM0335C1H2R7BA01#

±0.25pF GRM0335C1H2R7CA01#

2.8pF ±0.05pF GRM0335C1H2R8WA01#

±0.1pF GRM0335C1H2R8BA01#

±0.25pF GRM0335C1H2R8CA01#

2.9pF ±0.05pF GRM0335C1H2R9WA01#

±0.1pF GRM0335C1H2R9BA01#

±0.25pF GRM0335C1H2R9CA01#

3.0pF ±0.05pF GRM0335C1H3R0WA01#

±0.1pF GRM0335C1H3R0BA01#

±0.25pF GRM0335C1H3R0CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 3.1pF ±0.05pF GRM0335C1H3R1WA01#

±0.1pF GRM0335C1H3R1BA01#

±0.25pF GRM0335C1H3R1CA01#

3.2pF ±0.05pF GRM0335C1H3R2WA01#

±0.1pF GRM0335C1H3R2BA01#

±0.25pF GRM0335C1H3R2CA01#

3.3pF ±0.05pF GRM0335C1H3R3WA01#

±0.1pF GRM0335C1H3R3BA01#

±0.25pF GRM0335C1H3R3CA01#

3.4pF ±0.05pF GRM0335C1H3R4WA01#

±0.1pF GRM0335C1H3R4BA01#

±0.25pF GRM0335C1H3R4CA01#

3.5pF ±0.05pF GRM0335C1H3R5WA01#

±0.1pF GRM0335C1H3R5BA01#

±0.25pF GRM0335C1H3R5CA01#

3.6pF ±0.05pF GRM0335C1H3R6WA01#

±0.1pF GRM0335C1H3R6BA01#

±0.25pF GRM0335C1H3R6CA01#

3.7pF ±0.05pF GRM0335C1H3R7WA01#

±0.1pF GRM0335C1H3R7BA01#

±0.25pF GRM0335C1H3R7CA01#

3.8pF ±0.05pF GRM0335C1H3R8WA01#

±0.1pF GRM0335C1H3R8BA01#

±0.25pF GRM0335C1H3R8CA01#

3.9pF ±0.05pF GRM0335C1H3R9WA01#

±0.1pF GRM0335C1H3R9BA01#

±0.25pF GRM0335C1H3R9CA01#

4.0pF ±0.05pF GRM0335C1H4R0WA01#

±0.1pF GRM0335C1H4R0BA01#

±0.25pF GRM0335C1H4R0CA01#

4.1pF ±0.05pF GRM0335C1H4R1WA01#

±0.1pF GRM0335C1H4R1BA01#

±0.25pF GRM0335C1H4R1CA01#

4.2pF ±0.05pF GRM0335C1H4R2WA01#

±0.1pF GRM0335C1H4R2BA01#

±0.25pF GRM0335C1H4R2CA01#

4.3pF ±0.05pF GRM0335C1H4R3WA01#

±0.1pF GRM0335C1H4R3BA01#

±0.25pF GRM0335C1H4R3CA01#

4.4pF ±0.05pF GRM0335C1H4R4WA01#

±0.1pF GRM0335C1H4R4BA01#

±0.25pF GRM0335C1H4R4CA01#

4.5pF ±0.05pF GRM0335C1H4R5WA01#

±0.1pF GRM0335C1H4R5BA01#

±0.25pF GRM0335C1H4R5CA01#

4.6pF ±0.05pF GRM0335C1H4R6WA01#

±0.1pF GRM0335C1H4R6BA01#

±0.25pF GRM0335C1H4R6CA01#

4.7pF ±0.05pF GRM0335C1H4R7WA01#

±0.1pF GRM0335C1H4R7BA01#

±0.25pF GRM0335C1H4R7CA01#

4.8pF ±0.05pF GRM0335C1H4R8WA01#

±0.1pF GRM0335C1H4R8BA01#

±0.25pF GRM0335C1H4R8CA01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 4.9pF ±0.05pF GRM0335C1H4R9WA01#

±0.1pF GRM0335C1H4R9BA01#

±0.25pF GRM0335C1H4R9CA01#

5.0pF ±0.05pF GRM0335C1H5R0WA01#

±0.1pF GRM0335C1H5R0BA01#

±0.25pF GRM0335C1H5R0CA01#

5.1pF ±0.05pF GRM0335C1H5R1WA01#

±0.1pF GRM0335C1H5R1BA01#

±0.25pF GRM0335C1H5R1CA01#

±0.5pF GRM0335C1H5R1DA01#

5.2pF ±0.05pF GRM0335C1H5R2WA01#

±0.1pF GRM0335C1H5R2BA01#

±0.25pF GRM0335C1H5R2CA01#

±0.5pF GRM0335C1H5R2DA01#

5.3pF ±0.05pF GRM0335C1H5R3WA01#

±0.1pF GRM0335C1H5R3BA01#

±0.25pF GRM0335C1H5R3CA01#

±0.5pF GRM0335C1H5R3DA01#

5.4pF ±0.05pF GRM0335C1H5R4WA01#

±0.1pF GRM0335C1H5R4BA01#

±0.25pF GRM0335C1H5R4CA01#

±0.5pF GRM0335C1H5R4DA01#

5.5pF ±0.05pF GRM0335C1H5R5WA01#

±0.1pF GRM0335C1H5R5BA01#

±0.25pF GRM0335C1H5R5CA01#

±0.5pF GRM0335C1H5R5DA01#

5.6pF ±0.05pF GRM0335C1H5R6WA01#

±0.1pF GRM0335C1H5R6BA01#

±0.25pF GRM0335C1H5R6CA01#

±0.5pF GRM0335C1H5R6DA01#

5.7pF ±0.05pF GRM0335C1H5R7WA01#

±0.1pF GRM0335C1H5R7BA01#

±0.25pF GRM0335C1H5R7CA01#

±0.5pF GRM0335C1H5R7DA01#

5.8pF ±0.05pF GRM0335C1H5R8WA01#

±0.1pF GRM0335C1H5R8BA01#

±0.25pF GRM0335C1H5R8CA01#

±0.5pF GRM0335C1H5R8DA01#

5.9pF ±0.05pF GRM0335C1H5R9WA01#

±0.1pF GRM0335C1H5R9BA01#

±0.25pF GRM0335C1H5R9CA01#

±0.5pF GRM0335C1H5R9DA01#

6.0pF ±0.05pF GRM0335C1H6R0WA01#

±0.1pF GRM0335C1H6R0BA01#

±0.25pF GRM0335C1H6R0CA01#

±0.5pF GRM0335C1H6R0DA01#

6.1pF ±0.05pF GRM0335C1H6R1WA01#

±0.1pF GRM0335C1H6R1BA01#

±0.25pF GRM0335C1H6R1CA01#

±0.5pF GRM0335C1H6R1DA01#

6.2pF ±0.05pF GRM0335C1H6R2WA01#

±0.1pF GRM0335C1H6R2BA01#

±0.25pF GRM0335C1H6R2CA01#

±0.5pF GRM0335C1H6R2DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 6.3pF ±0.05pF GRM0335C1H6R3WA01#

±0.1pF GRM0335C1H6R3BA01#

±0.25pF GRM0335C1H6R3CA01#

±0.5pF GRM0335C1H6R3DA01#

6.4pF ±0.05pF GRM0335C1H6R4WA01#

±0.1pF GRM0335C1H6R4BA01#

±0.25pF GRM0335C1H6R4CA01#

±0.5pF GRM0335C1H6R4DA01#

6.5pF ±0.05pF GRM0335C1H6R5WA01#

±0.1pF GRM0335C1H6R5BA01#

±0.25pF GRM0335C1H6R5CA01#

±0.5pF GRM0335C1H6R5DA01#

6.6pF ±0.05pF GRM0335C1H6R6WA01#

±0.1pF GRM0335C1H6R6BA01#

±0.25pF GRM0335C1H6R6CA01#

±0.5pF GRM0335C1H6R6DA01#

6.7pF ±0.05pF GRM0335C1H6R7WA01#

±0.1pF GRM0335C1H6R7BA01#

±0.25pF GRM0335C1H6R7CA01#

±0.5pF GRM0335C1H6R7DA01#

6.8pF ±0.05pF GRM0335C1H6R8WA01#

±0.1pF GRM0335C1H6R8BA01#

±0.25pF GRM0335C1H6R8CA01#

±0.5pF GRM0335C1H6R8DA01#

6.9pF ±0.05pF GRM0335C1H6R9WA01#

±0.1pF GRM0335C1H6R9BA01#

±0.25pF GRM0335C1H6R9CA01#

±0.5pF GRM0335C1H6R9DA01#

7.0pF ±0.05pF GRM0335C1H7R0WA01#

±0.1pF GRM0335C1H7R0BA01#

±0.25pF GRM0335C1H7R0CA01#

±0.5pF GRM0335C1H7R0DA01#

7.1pF ±0.05pF GRM0335C1H7R1WA01#

±0.1pF GRM0335C1H7R1BA01#

±0.25pF GRM0335C1H7R1CA01#

±0.5pF GRM0335C1H7R1DA01#

7.2pF ±0.05pF GRM0335C1H7R2WA01#

±0.1pF GRM0335C1H7R2BA01#

±0.25pF GRM0335C1H7R2CA01#

±0.5pF GRM0335C1H7R2DA01#

7.3pF ±0.05pF GRM0335C1H7R3WA01#

±0.1pF GRM0335C1H7R3BA01#

±0.25pF GRM0335C1H7R3CA01#

±0.5pF GRM0335C1H7R3DA01#

7.4pF ±0.05pF GRM0335C1H7R4WA01#

±0.1pF GRM0335C1H7R4BA01#

±0.25pF GRM0335C1H7R4CA01#

±0.5pF GRM0335C1H7R4DA01#

7.5pF ±0.05pF GRM0335C1H7R5WA01#

±0.1pF GRM0335C1H7R5BA01#

±0.25pF GRM0335C1H7R5CA01#

±0.5pF GRM0335C1H7R5DA01#

7.6pF ±0.05pF GRM0335C1H7R6WA01#

±0.1pF GRM0335C1H7R6BA01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 7.6pF ±0.25pF GRM0335C1H7R6CA01#

±0.5pF GRM0335C1H7R6DA01#

7.7pF ±0.05pF GRM0335C1H7R7WA01#

±0.1pF GRM0335C1H7R7BA01#

±0.25pF GRM0335C1H7R7CA01#

±0.5pF GRM0335C1H7R7DA01#

7.8pF ±0.05pF GRM0335C1H7R8WA01#

±0.1pF GRM0335C1H7R8BA01#

±0.25pF GRM0335C1H7R8CA01#

±0.5pF GRM0335C1H7R8DA01#

7.9pF ±0.05pF GRM0335C1H7R9WA01#

±0.1pF GRM0335C1H7R9BA01#

±0.25pF GRM0335C1H7R9CA01#

±0.5pF GRM0335C1H7R9DA01#

8.0pF ±0.05pF GRM0335C1H8R0WA01#

±0.1pF GRM0335C1H8R0BA01#

±0.25pF GRM0335C1H8R0CA01#

±0.5pF GRM0335C1H8R0DA01#

8.1pF ±0.05pF GRM0335C1H8R1WA01#

±0.1pF GRM0335C1H8R1BA01#

±0.25pF GRM0335C1H8R1CA01#

±0.5pF GRM0335C1H8R1DA01#

8.2pF ±0.05pF GRM0335C1H8R2WA01#

±0.1pF GRM0335C1H8R2BA01#

±0.25pF GRM0335C1H8R2CA01#

±0.5pF GRM0335C1H8R2DA01#

8.3pF ±0.05pF GRM0335C1H8R3WA01#

±0.1pF GRM0335C1H8R3BA01#

±0.25pF GRM0335C1H8R3CA01#

±0.5pF GRM0335C1H8R3DA01#

8.4pF ±0.05pF GRM0335C1H8R4WA01#

±0.1pF GRM0335C1H8R4BA01#

±0.25pF GRM0335C1H8R4CA01#

±0.5pF GRM0335C1H8R4DA01#

8.5pF ±0.05pF GRM0335C1H8R5WA01#

±0.1pF GRM0335C1H8R5BA01#

±0.25pF GRM0335C1H8R5CA01#

±0.5pF GRM0335C1H8R5DA01#

8.6pF ±0.05pF GRM0335C1H8R6WA01#

±0.1pF GRM0335C1H8R6BA01#

±0.25pF GRM0335C1H8R6CA01#

±0.5pF GRM0335C1H8R6DA01#

8.7pF ±0.05pF GRM0335C1H8R7WA01#

±0.1pF GRM0335C1H8R7BA01#

±0.25pF GRM0335C1H8R7CA01#

±0.5pF GRM0335C1H8R7DA01#

8.8pF ±0.05pF GRM0335C1H8R8WA01#

±0.1pF GRM0335C1H8R8BA01#

±0.25pF GRM0335C1H8R8CA01#

±0.5pF GRM0335C1H8R8DA01#

8.9pF ±0.05pF GRM0335C1H8R9WA01#

±0.1pF GRM0335C1H8R9BA01#

±0.25pF GRM0335C1H8R9CA01#

±0.5pF GRM0335C1H8R9DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 9.0pF ±0.05pF GRM0335C1H9R0WA01#

±0.1pF GRM0335C1H9R0BA01#

±0.25pF GRM0335C1H9R0CA01#

±0.5pF GRM0335C1H9R0DA01#

9.1pF ±0.05pF GRM0335C1H9R1WA01#

±0.1pF GRM0335C1H9R1BA01#

±0.25pF GRM0335C1H9R1CA01#

±0.5pF GRM0335C1H9R1DA01#

9.2pF ±0.05pF GRM0335C1H9R2WA01#

±0.1pF GRM0335C1H9R2BA01#

±0.25pF GRM0335C1H9R2CA01#

±0.5pF GRM0335C1H9R2DA01#

9.3pF ±0.05pF GRM0335C1H9R3WA01#

±0.1pF GRM0335C1H9R3BA01#

±0.25pF GRM0335C1H9R3CA01#

±0.5pF GRM0335C1H9R3DA01#

9.4pF ±0.05pF GRM0335C1H9R4WA01#

±0.1pF GRM0335C1H9R4BA01#

±0.25pF GRM0335C1H9R4CA01#

±0.5pF GRM0335C1H9R4DA01#

9.5pF ±0.05pF GRM0335C1H9R5WA01#

±0.1pF GRM0335C1H9R5BA01#

±0.25pF GRM0335C1H9R5CA01#

±0.5pF GRM0335C1H9R5DA01#

9.6pF ±0.05pF GRM0335C1H9R6WA01#

±0.1pF GRM0335C1H9R6BA01#

±0.25pF GRM0335C1H9R6CA01#

±0.5pF GRM0335C1H9R6DA01#

9.7pF ±0.05pF GRM0335C1H9R7WA01#

±0.1pF GRM0335C1H9R7BA01#

±0.25pF GRM0335C1H9R7CA01#

±0.5pF GRM0335C1H9R7DA01#

9.8pF ±0.05pF GRM0335C1H9R8WA01#

±0.1pF GRM0335C1H9R8BA01#

±0.25pF GRM0335C1H9R8CA01#

±0.5pF GRM0335C1H9R8DA01#

9.9pF ±0.05pF GRM0335C1H9R9WA01#

±0.1pF GRM0335C1H9R9BA01#

±0.25pF GRM0335C1H9R9CA01#

±0.5pF GRM0335C1H9R9DA01#

10pF ±2% GRM0335C1H100GA01#

±5% GRM0335C1H100JA01#

12pF ±2% GRM0335C1H120GA01#

±5% GRM0335C1H120JA01#

15pF ±2% GRM0335C1H150GA01#

±5% GRM0335C1H150JA01#

18pF ±2% GRM0335C1H180GA01#

±5% GRM0335C1H180JA01#

22pF ±2% GRM0335C1H220GA01#

±5% GRM0335C1H220JA01#

27pF ±2% GRM0335C1H270GA01#

±5% GRM0335C1H270JA01#

33pF ±2% GRM0335C1H330GA01#

±5% GRM0335C1H330JA01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 39pF ±2% GRM0335C1H390GA01#

±5% GRM0335C1H390JA01#

47pF ±2% GRM0335C1H470GA01#

±5% GRM0335C1H470JA01#

56pF ±2% GRM0335C1H560GA01#

±5% GRM0335C1H560JA01#

68pF ±2% GRM0335C1H680GA01#

±5% GRM0335C1H680JA01#

82pF ±2% GRM0335C1H820GA01#

±5% GRM0335C1H820JA01#

100pF ±2% GRM0335C1H101GA01#

±5% GRM0335C1H101JA01#

CK 0.1pF ±0.05pF GRM0334C1HR10WA01#

±0.1pF GRM0334C1HR10BA01#

0.2pF ±0.05pF GRM0334C1HR20WA01#

±0.1pF GRM0334C1HR20BA01#

0.3pF ±0.05pF GRM0334C1HR30WA01#

±0.1pF GRM0334C1HR30BA01#

0.4pF ±0.05pF GRM0334C1HR40WA01#

±0.1pF GRM0334C1HR40BA01#

0.5pF ±0.05pF GRM0334C1HR50WA01#

±0.1pF GRM0334C1HR50BA01#

0.6pF ±0.05pF GRM0334C1HR60WA01#

±0.1pF GRM0334C1HR60BA01#

0.7pF ±0.05pF GRM0334C1HR70WA01#

±0.1pF GRM0334C1HR70BA01#

0.8pF ±0.05pF GRM0334C1HR80WA01#

±0.1pF GRM0334C1HR80BA01#

0.9pF ±0.05pF GRM0334C1HR90WA01#

±0.1pF GRM0334C1HR90BA01#

1.0pF ±0.05pF GRM0334C1H1R0WA01#

±0.1pF GRM0334C1H1R0BA01#

±0.25pF GRM0334C1H1R0CA01#

1.1pF ±0.05pF GRM0334C1H1R1WA01#

±0.1pF GRM0334C1H1R1BA01#

±0.25pF GRM0334C1H1R1CA01#

1.2pF ±0.05pF GRM0334C1H1R2WA01#

±0.1pF GRM0334C1H1R2BA01#

±0.25pF GRM0334C1H1R2CA01#

1.3pF ±0.05pF GRM0334C1H1R3WA01#

±0.1pF GRM0334C1H1R3BA01#

±0.25pF GRM0334C1H1R3CA01#

1.4pF ±0.05pF GRM0334C1H1R4WA01#

±0.1pF GRM0334C1H1R4BA01#

±0.25pF GRM0334C1H1R4CA01#

1.5pF ±0.05pF GRM0334C1H1R5WA01#

±0.1pF GRM0334C1H1R5BA01#

±0.25pF GRM0334C1H1R5CA01#

1.6pF ±0.05pF GRM0334C1H1R6WA01#

±0.1pF GRM0334C1H1R6BA01#

±0.25pF GRM0334C1H1R6CA01#

1.7pF ±0.05pF GRM0334C1H1R7WA01#

±0.1pF GRM0334C1H1R7BA01#

±0.25pF GRM0334C1H1R7CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CK 1.8pF ±0.05pF GRM0334C1H1R8WA01#

±0.1pF GRM0334C1H1R8BA01#

±0.25pF GRM0334C1H1R8CA01#

1.9pF ±0.05pF GRM0334C1H1R9WA01#

±0.1pF GRM0334C1H1R9BA01#

±0.25pF GRM0334C1H1R9CA01#

2.0pF ±0.05pF GRM0334C1H2R0WA01#

±0.1pF GRM0334C1H2R0BA01#

±0.25pF GRM0334C1H2R0CA01#

CJ 2.1pF ±0.05pF GRM0333C1H2R1WA01#

±0.1pF GRM0333C1H2R1BA01#

±0.25pF GRM0333C1H2R1CA01#

2.2pF ±0.05pF GRM0333C1H2R2WA01#

±0.1pF GRM0333C1H2R2BA01#

±0.25pF GRM0333C1H2R2CA01#

2.3pF ±0.05pF GRM0333C1H2R3WA01#

±0.1pF GRM0333C1H2R3BA01#

±0.25pF GRM0333C1H2R3CA01#

2.4pF ±0.05pF GRM0333C1H2R4WA01#

±0.1pF GRM0333C1H2R4BA01#

±0.25pF GRM0333C1H2R4CA01#

2.5pF ±0.05pF GRM0333C1H2R5WA01#

±0.1pF GRM0333C1H2R5BA01#

±0.25pF GRM0333C1H2R5CA01#

2.6pF ±0.05pF GRM0333C1H2R6WA01#

±0.1pF GRM0333C1H2R6BA01#

±0.25pF GRM0333C1H2R6CA01#

2.7pF ±0.05pF GRM0333C1H2R7WA01#

±0.1pF GRM0333C1H2R7BA01#

±0.25pF GRM0333C1H2R7CA01#

2.8pF ±0.05pF GRM0333C1H2R8WA01#

±0.1pF GRM0333C1H2R8BA01#

±0.25pF GRM0333C1H2R8CA01#

2.9pF ±0.05pF GRM0333C1H2R9WA01#

±0.1pF GRM0333C1H2R9BA01#

±0.25pF GRM0333C1H2R9CA01#

3.0pF ±0.05pF GRM0333C1H3R0WA01#

±0.1pF GRM0333C1H3R0BA01#

±0.25pF GRM0333C1H3R0CA01#

3.1pF ±0.05pF GRM0333C1H3R1WA01#

±0.1pF GRM0333C1H3R1BA01#

±0.25pF GRM0333C1H3R1CA01#

3.2pF ±0.05pF GRM0333C1H3R2WA01#

±0.1pF GRM0333C1H3R2BA01#

±0.25pF GRM0333C1H3R2CA01#

3.3pF ±0.05pF GRM0333C1H3R3WA01#

±0.1pF GRM0333C1H3R3BA01#

±0.25pF GRM0333C1H3R3CA01#

3.4pF ±0.05pF GRM0333C1H3R4WA01#

±0.1pF GRM0333C1H3R4BA01#

±0.25pF GRM0333C1H3R4CA01#

3.5pF ±0.05pF GRM0333C1H3R5WA01#

±0.1pF GRM0333C1H3R5BA01#

±0.25pF GRM0333C1H3R5CA01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CJ 3.6pF ±0.05pF GRM0333C1H3R6WA01#

±0.1pF GRM0333C1H3R6BA01#

±0.25pF GRM0333C1H3R6CA01#

3.7pF ±0.05pF GRM0333C1H3R7WA01#

±0.1pF GRM0333C1H3R7BA01#

±0.25pF GRM0333C1H3R7CA01#

3.8pF ±0.05pF GRM0333C1H3R8WA01#

±0.1pF GRM0333C1H3R8BA01#

±0.25pF GRM0333C1H3R8CA01#

3.9pF ±0.05pF GRM0333C1H3R9WA01#

±0.1pF GRM0333C1H3R9BA01#

±0.25pF GRM0333C1H3R9CA01#

CH 4.0pF ±0.05pF GRM0332C1H4R0WA01#

±0.1pF GRM0332C1H4R0BA01#

±0.25pF GRM0332C1H4R0CA01#

4.1pF ±0.05pF GRM0332C1H4R1WA01#

±0.1pF GRM0332C1H4R1BA01#

±0.25pF GRM0332C1H4R1CA01#

4.2pF ±0.05pF GRM0332C1H4R2WA01#

±0.1pF GRM0332C1H4R2BA01#

±0.25pF GRM0332C1H4R2CA01#

4.3pF ±0.05pF GRM0332C1H4R3WA01#

±0.1pF GRM0332C1H4R3BA01#

±0.25pF GRM0332C1H4R3CA01#

4.4pF ±0.05pF GRM0332C1H4R4WA01#

±0.1pF GRM0332C1H4R4BA01#

±0.25pF GRM0332C1H4R4CA01#

4.5pF ±0.05pF GRM0332C1H4R5WA01#

±0.1pF GRM0332C1H4R5BA01#

±0.25pF GRM0332C1H4R5CA01#

4.6pF ±0.05pF GRM0332C1H4R6WA01#

±0.1pF GRM0332C1H4R6BA01#

±0.25pF GRM0332C1H4R6CA01#

4.7pF ±0.05pF GRM0332C1H4R7WA01#

±0.1pF GRM0332C1H4R7BA01#

±0.25pF GRM0332C1H4R7CA01#

4.8pF ±0.05pF GRM0332C1H4R8WA01#

±0.1pF GRM0332C1H4R8BA01#

±0.25pF GRM0332C1H4R8CA01#

4.9pF ±0.05pF GRM0332C1H4R9WA01#

±0.1pF GRM0332C1H4R9BA01#

±0.25pF GRM0332C1H4R9CA01#

5.0pF ±0.05pF GRM0332C1H5R0WA01#

±0.1pF GRM0332C1H5R0BA01#

±0.25pF GRM0332C1H5R0CA01#

5.1pF ±0.05pF GRM0332C1H5R1WA01#

±0.1pF GRM0332C1H5R1BA01#

±0.25pF GRM0332C1H5R1CA01#

±0.5pF GRM0332C1H5R1DA01#

5.2pF ±0.05pF GRM0332C1H5R2WA01#

±0.1pF GRM0332C1H5R2BA01#

±0.25pF GRM0332C1H5R2CA01#

±0.5pF GRM0332C1H5R2DA01#

5.3pF ±0.05pF GRM0332C1H5R3WA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CH 5.3pF ±0.1pF GRM0332C1H5R3BA01#

±0.25pF GRM0332C1H5R3CA01#

±0.5pF GRM0332C1H5R3DA01#

5.4pF ±0.05pF GRM0332C1H5R4WA01#

±0.1pF GRM0332C1H5R4BA01#

±0.25pF GRM0332C1H5R4CA01#

±0.5pF GRM0332C1H5R4DA01#

5.5pF ±0.05pF GRM0332C1H5R5WA01#

±0.1pF GRM0332C1H5R5BA01#

±0.25pF GRM0332C1H5R5CA01#

±0.5pF GRM0332C1H5R5DA01#

5.6pF ±0.05pF GRM0332C1H5R6WA01#

±0.1pF GRM0332C1H5R6BA01#

±0.25pF GRM0332C1H5R6CA01#

±0.5pF GRM0332C1H5R6DA01#

5.7pF ±0.05pF GRM0332C1H5R7WA01#

±0.1pF GRM0332C1H5R7BA01#

±0.25pF GRM0332C1H5R7CA01#

±0.5pF GRM0332C1H5R7DA01#

5.8pF ±0.05pF GRM0332C1H5R8WA01#

±0.1pF GRM0332C1H5R8BA01#

±0.25pF GRM0332C1H5R8CA01#

±0.5pF GRM0332C1H5R8DA01#

5.9pF ±0.05pF GRM0332C1H5R9WA01#

±0.1pF GRM0332C1H5R9BA01#

±0.25pF GRM0332C1H5R9CA01#

±0.5pF GRM0332C1H5R9DA01#

6.0pF ±0.05pF GRM0332C1H6R0WA01#

±0.1pF GRM0332C1H6R0BA01#

±0.25pF GRM0332C1H6R0CA01#

±0.5pF GRM0332C1H6R0DA01#

6.1pF ±0.05pF GRM0332C1H6R1WA01#

±0.1pF GRM0332C1H6R1BA01#

±0.25pF GRM0332C1H6R1CA01#

±0.5pF GRM0332C1H6R1DA01#

6.2pF ±0.05pF GRM0332C1H6R2WA01#

±0.1pF GRM0332C1H6R2BA01#

±0.25pF GRM0332C1H6R2CA01#

±0.5pF GRM0332C1H6R2DA01#

6.3pF ±0.05pF GRM0332C1H6R3WA01#

±0.1pF GRM0332C1H6R3BA01#

±0.25pF GRM0332C1H6R3CA01#

±0.5pF GRM0332C1H6R3DA01#

6.4pF ±0.05pF GRM0332C1H6R4WA01#

±0.1pF GRM0332C1H6R4BA01#

±0.25pF GRM0332C1H6R4CA01#

±0.5pF GRM0332C1H6R4DA01#

6.5pF ±0.05pF GRM0332C1H6R5WA01#

±0.1pF GRM0332C1H6R5BA01#

±0.25pF GRM0332C1H6R5CA01#

±0.5pF GRM0332C1H6R5DA01#

6.6pF ±0.05pF GRM0332C1H6R6WA01#

±0.1pF GRM0332C1H6R6BA01#

±0.25pF GRM0332C1H6R6CA01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CH 6.6pF ±0.5pF GRM0332C1H6R6DA01#

6.7pF ±0.05pF GRM0332C1H6R7WA01#

±0.1pF GRM0332C1H6R7BA01#

±0.25pF GRM0332C1H6R7CA01#

±0.5pF GRM0332C1H6R7DA01#

6.8pF ±0.05pF GRM0332C1H6R8WA01#

±0.1pF GRM0332C1H6R8BA01#

±0.25pF GRM0332C1H6R8CA01#

±0.5pF GRM0332C1H6R8DA01#

6.9pF ±0.05pF GRM0332C1H6R9WA01#

±0.1pF GRM0332C1H6R9BA01#

±0.25pF GRM0332C1H6R9CA01#

±0.5pF GRM0332C1H6R9DA01#

7.0pF ±0.05pF GRM0332C1H7R0WA01#

±0.1pF GRM0332C1H7R0BA01#

±0.25pF GRM0332C1H7R0CA01#

±0.5pF GRM0332C1H7R0DA01#

7.1pF ±0.05pF GRM0332C1H7R1WA01#

±0.1pF GRM0332C1H7R1BA01#

±0.25pF GRM0332C1H7R1CA01#

±0.5pF GRM0332C1H7R1DA01#

7.2pF ±0.05pF GRM0332C1H7R2WA01#

±0.1pF GRM0332C1H7R2BA01#

±0.25pF GRM0332C1H7R2CA01#

±0.5pF GRM0332C1H7R2DA01#

7.3pF ±0.05pF GRM0332C1H7R3WA01#

±0.1pF GRM0332C1H7R3BA01#

±0.25pF GRM0332C1H7R3CA01#

±0.5pF GRM0332C1H7R3DA01#

7.4pF ±0.05pF GRM0332C1H7R4WA01#

±0.1pF GRM0332C1H7R4BA01#

±0.25pF GRM0332C1H7R4CA01#

±0.5pF GRM0332C1H7R4DA01#

7.5pF ±0.05pF GRM0332C1H7R5WA01#

±0.1pF GRM0332C1H7R5BA01#

±0.25pF GRM0332C1H7R5CA01#

±0.5pF GRM0332C1H7R5DA01#

7.6pF ±0.05pF GRM0332C1H7R6WA01#

±0.1pF GRM0332C1H7R6BA01#

±0.25pF GRM0332C1H7R6CA01#

±0.5pF GRM0332C1H7R6DA01#

7.7pF ±0.05pF GRM0332C1H7R7WA01#

±0.1pF GRM0332C1H7R7BA01#

±0.25pF GRM0332C1H7R7CA01#

±0.5pF GRM0332C1H7R7DA01#

7.8pF ±0.05pF GRM0332C1H7R8WA01#

±0.1pF GRM0332C1H7R8BA01#

±0.25pF GRM0332C1H7R8CA01#

±0.5pF GRM0332C1H7R8DA01#

7.9pF ±0.05pF GRM0332C1H7R9WA01#

±0.1pF GRM0332C1H7R9BA01#

±0.25pF GRM0332C1H7R9CA01#

±0.5pF GRM0332C1H7R9DA01#

8.0pF ±0.05pF GRM0332C1H8R0WA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CH 8.0pF ±0.1pF GRM0332C1H8R0BA01#

±0.25pF GRM0332C1H8R0CA01#

±0.5pF GRM0332C1H8R0DA01#

8.1pF ±0.05pF GRM0332C1H8R1WA01#

±0.1pF GRM0332C1H8R1BA01#

±0.25pF GRM0332C1H8R1CA01#

±0.5pF GRM0332C1H8R1DA01#

8.2pF ±0.05pF GRM0332C1H8R2WA01#

±0.1pF GRM0332C1H8R2BA01#

±0.25pF GRM0332C1H8R2CA01#

±0.5pF GRM0332C1H8R2DA01#

8.3pF ±0.05pF GRM0332C1H8R3WA01#

±0.1pF GRM0332C1H8R3BA01#

±0.25pF GRM0332C1H8R3CA01#

±0.5pF GRM0332C1H8R3DA01#

8.4pF ±0.05pF GRM0332C1H8R4WA01#

±0.1pF GRM0332C1H8R4BA01#

±0.25pF GRM0332C1H8R4CA01#

±0.5pF GRM0332C1H8R4DA01#

8.5pF ±0.05pF GRM0332C1H8R5WA01#

±0.1pF GRM0332C1H8R5BA01#

±0.25pF GRM0332C1H8R5CA01#

±0.5pF GRM0332C1H8R5DA01#

8.6pF ±0.05pF GRM0332C1H8R6WA01#

±0.1pF GRM0332C1H8R6BA01#

±0.25pF GRM0332C1H8R6CA01#

±0.5pF GRM0332C1H8R6DA01#

8.7pF ±0.05pF GRM0332C1H8R7WA01#

±0.1pF GRM0332C1H8R7BA01#

±0.25pF GRM0332C1H8R7CA01#

±0.5pF GRM0332C1H8R7DA01#

8.8pF ±0.05pF GRM0332C1H8R8WA01#

±0.1pF GRM0332C1H8R8BA01#

±0.25pF GRM0332C1H8R8CA01#

±0.5pF GRM0332C1H8R8DA01#

8.9pF ±0.05pF GRM0332C1H8R9WA01#

±0.1pF GRM0332C1H8R9BA01#

±0.25pF GRM0332C1H8R9CA01#

±0.5pF GRM0332C1H8R9DA01#

9.0pF ±0.05pF GRM0332C1H9R0WA01#

±0.1pF GRM0332C1H9R0BA01#

±0.25pF GRM0332C1H9R0CA01#

±0.5pF GRM0332C1H9R0DA01#

9.1pF ±0.05pF GRM0332C1H9R1WA01#

±0.1pF GRM0332C1H9R1BA01#

±0.25pF GRM0332C1H9R1CA01#

±0.5pF GRM0332C1H9R1DA01#

9.2pF ±0.05pF GRM0332C1H9R2WA01#

±0.1pF GRM0332C1H9R2BA01#

±0.25pF GRM0332C1H9R2CA01#

±0.5pF GRM0332C1H9R2DA01#

9.3pF ±0.05pF GRM0332C1H9R3WA01#

±0.1pF GRM0332C1H9R3BA01#

±0.25pF GRM0332C1H9R3CA01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CH 9.3pF ±0.5pF GRM0332C1H9R3DA01#

9.4pF ±0.05pF GRM0332C1H9R4WA01#

±0.1pF GRM0332C1H9R4BA01#

±0.25pF GRM0332C1H9R4CA01#

±0.5pF GRM0332C1H9R4DA01#

9.5pF ±0.05pF GRM0332C1H9R5WA01#

±0.1pF GRM0332C1H9R5BA01#

±0.25pF GRM0332C1H9R5CA01#

±0.5pF GRM0332C1H9R5DA01#

9.6pF ±0.05pF GRM0332C1H9R6WA01#

±0.1pF GRM0332C1H9R6BA01#

±0.25pF GRM0332C1H9R6CA01#

±0.5pF GRM0332C1H9R6DA01#

9.7pF ±0.05pF GRM0332C1H9R7WA01#

±0.1pF GRM0332C1H9R7BA01#

±0.25pF GRM0332C1H9R7CA01#

±0.5pF GRM0332C1H9R7DA01#

9.8pF ±0.05pF GRM0332C1H9R8WA01#

±0.1pF GRM0332C1H9R8BA01#

±0.25pF GRM0332C1H9R8CA01#

±0.5pF GRM0332C1H9R8DA01#

9.9pF ±0.05pF GRM0332C1H9R9WA01#

±0.1pF GRM0332C1H9R9BA01#

±0.25pF GRM0332C1H9R9CA01#

±0.5pF GRM0332C1H9R9DA01#

10pF ±2% GRM0332C1H100GA01#

±5% GRM0332C1H100JA01#

12pF ±2% GRM0332C1H120GA01#

±5% GRM0332C1H120JA01#

15pF ±2% GRM0332C1H150GA01#

±5% GRM0332C1H150JA01#

18pF ±2% GRM0332C1H180GA01#

±5% GRM0332C1H180JA01#

22pF ±2% GRM0332C1H220GA01#

±5% GRM0332C1H220JA01#

27pF ±2% GRM0332C1H270GA01#

±5% GRM0332C1H270JA01#

33pF ±2% GRM0332C1H330GA01#

±5% GRM0332C1H330JA01#

39pF ±2% GRM0332C1H390GA01#

±5% GRM0332C1H390JA01#

47pF ±2% GRM0332C1H470GA01#

±5% GRM0332C1H470JA01#

56pF ±2% GRM0332C1H560GA01#

±5% GRM0332C1H560JA01#

68pF ±2% GRM0332C1H680GA01#

±5% GRM0332C1H680JA01#

82pF ±2% GRM0332C1H820GA01#

±5% GRM0332C1H820JA01#

100pF ±2% GRM0332C1H101GA01#

±5% GRM0332C1H101JA01#

UK 1.0pF ±0.25pF GRM0334U1H1R0CD01#

2.0pF ±0.25pF GRM0334U1H2R0CD01#

UJ 3.0pF ±0.25pF GRM0333U1H3R0CD01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc UJ 4.0pF ±0.25pF GRM0333U1H4R0CD01#

5.0pF ±0.25pF GRM0333U1H5R0CD01#

6.0pF ±0.5pF GRM0333U1H6R0DD01#

7.0pF ±0.5pF GRM0333U1H7R0DD01#

8.0pF ±0.5pF GRM0333U1H8R0DD01#

9.0pF ±0.5pF GRM0333U1H9R0DD01#

10pF ±5% GRM0333U1H100JD01#

12pF ±5% GRM0333U1H120JD01#

15pF ±5% GRM0333U1H150JD01#

25Vdc R2H 1.0pF ±0.25pF GRM0336R1E1R0CD01#

2.0pF ±0.25pF GRM0336R1E2R0CD01#

3.0pF ±0.25pF GRM0336R1E3R0CD01#

4.0pF ±0.25pF GRM0336R1E4R0CD01#

5.0pF ±0.25pF GRM0336R1E5R0CD01#

6.0pF ±0.5pF GRM0336R1E6R0DD01#

7.0pF ±0.5pF GRM0336R1E7R0DD01#

8.0pF ±0.5pF GRM0336R1E8R0DD01#

9.0pF ±0.5pF GRM0336R1E9R0DD01#

10pF ±5% GRM0336R1E100JD01#

12pF ±5% GRM0336R1E120JD01#

15pF ±5% GRM0336R1E150JD01#

18pF ±5% GRM0336R1E180JD01#

22pF ±5% GRM0336R1E220JD01#

27pF ±5% GRM0336R1E270JD01#

33pF ±5% GRM0336R1E330JD01#

39pF ±5% GRM0336R1E390JD01#

47pF ±5% GRM0336R1E470JD01#

56pF ±5% GRM0336R1E560JD01#

68pF ±5% GRM0336R1E680JD01#

82pF ±5% GRM0336R1E820JD01#

100pF ±5% GRM0336R1E101JD01#

RK 1.0pF ±0.25pF GRM0334R1E1R0CD01#

2.0pF ±0.25pF GRM0334R1E2R0CD01#

RJ 3.0pF ±0.25pF GRM0333R1E3R0CD01#

RH 4.0pF ±0.25pF GRM0332R1E4R0CD01#

5.0pF ±0.25pF GRM0332R1E5R0CD01#

6.0pF ±0.5pF GRM0332R1E6R0DD01#

7.0pF ±0.5pF GRM0332R1E7R0DD01#

8.0pF ±0.5pF GRM0332R1E8R0DD01#

9.0pF ±0.5pF GRM0332R1E9R0DD01#

10pF ±5% GRM0332R1E100JD01#

12pF ±5% GRM0332R1E120JD01#

15pF ±5% GRM0332R1E150JD01#

18pF ±5% GRM0332R1E180JD01#

22pF ±5% GRM0332R1E220JD01#

27pF ±5% GRM0332R1E270JD01#

33pF ±5% GRM0332R1E330JD01#

39pF ±5% GRM0332R1E390JD01#

47pF ±5% GRM0332R1E470JD01#

56pF ±5% GRM0332R1E560JD01#

68pF ±5% GRM0332R1E680JD01#

82pF ±5% GRM0332R1E820JD01#

100pF ±5% GRM0332R1E101JD01#

S2H 1.0pF ±0.25pF GRM0336S1E1R0CD01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc S2H 2.0pF ±0.25pF GRM0336S1E2R0CD01#

3.0pF ±0.25pF GRM0336S1E3R0CD01#

4.0pF ±0.25pF GRM0336S1E4R0CD01#

5.0pF ±0.25pF GRM0336S1E5R0CD01#

6.0pF ±0.5pF GRM0336S1E6R0DD01#

7.0pF ±0.5pF GRM0336S1E7R0DD01#

8.0pF ±0.5pF GRM0336S1E8R0DD01#

9.0pF ±0.5pF GRM0336S1E9R0DD01#

10pF ±5% GRM0336S1E100JD01#

12pF ±5% GRM0336S1E120JD01#

15pF ±5% GRM0336S1E150JD01#

18pF ±5% GRM0336S1E180JD01#

22pF ±5% GRM0336S1E220JD01#

27pF ±5% GRM0336S1E270JD01#

33pF ±5% GRM0336S1E330JD01#

39pF ±5% GRM0336S1E390JD01#

47pF ±5% GRM0336S1E470JD01#

56pF ±5% GRM0336S1E560JD01#

68pF ±5% GRM0336S1E680JD01#

82pF ±5% GRM0336S1E820JD01#

100pF ±5% GRM0336S1E101JD01#

SK 1.0pF ±0.25pF GRM0334S1E1R0CD01#

2.0pF ±0.25pF GRM0334S1E2R0CD01#

SJ 3.0pF ±0.25pF GRM0333S1E3R0CD01#

SH 4.0pF ±0.25pF GRM0332S1E4R0CD01#

5.0pF ±0.25pF GRM0332S1E5R0CD01#

6.0pF ±0.5pF GRM0332S1E6R0DD01#

7.0pF ±0.5pF GRM0332S1E7R0DD01#

8.0pF ±0.5pF GRM0332S1E8R0DD01#

9.0pF ±0.5pF GRM0332S1E9R0DD01#

10pF ±5% GRM0332S1E100JD01#

12pF ±5% GRM0332S1E120JD01#

15pF ±5% GRM0332S1E150JD01#

18pF ±5% GRM0332S1E180JD01#

22pF ±5% GRM0332S1E220JD01#

27pF ±5% GRM0332S1E270JD01#

33pF ±5% GRM0332S1E330JD01#

39pF ±5% GRM0332S1E390JD01#

47pF ±5% GRM0332S1E470JD01#

56pF ±5% GRM0332S1E560JD01#

68pF ±5% GRM0332S1E680JD01#

82pF ±5% GRM0332S1E820JD01#

100pF ±5% GRM0332S1E101JD01#

T2H 1.0pF ±0.25pF GRM0336T1E1R0CD01#

2.0pF ±0.25pF GRM0336T1E2R0CD01#

3.0pF ±0.25pF GRM0336T1E3R0CD01#

4.0pF ±0.25pF GRM0336T1E4R0CD01#

5.0pF ±0.25pF GRM0336T1E5R0CD01#

6.0pF ±0.5pF GRM0336T1E6R0DD01#

7.0pF ±0.5pF GRM0336T1E7R0DD01#

8.0pF ±0.5pF GRM0336T1E8R0DD01#

9.0pF ±0.5pF GRM0336T1E9R0DD01#

10pF ±5% GRM0336T1E100JD01#

12pF ±5% GRM0336T1E120JD01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc T2H 15pF ±5% GRM0336T1E150JD01#

18pF ±5% GRM0336T1E180JD01#

22pF ±5% GRM0336T1E220JD01#

27pF ±5% GRM0336T1E270JD01#

33pF ±5% GRM0336T1E330JD01#

39pF ±5% GRM0336T1E390JD01#

47pF ±5% GRM0336T1E470JD01#

56pF ±5% GRM0336T1E560JD01#

68pF ±5% GRM0336T1E680JD01#

82pF ±5% GRM0336T1E820JD01#

100pF ±5% GRM0336T1E101JD01#

TK 1.0pF ±0.25pF GRM0334T1E1R0CD01#

2.0pF ±0.25pF GRM0334T1E2R0CD01#

TJ 3.0pF ±0.25pF GRM0333T1E3R0CD01#

TH 4.0pF ±0.25pF GRM0332T1E4R0CD01#

5.0pF ±0.25pF GRM0332T1E5R0CD01#

6.0pF ±0.5pF GRM0332T1E6R0DD01#

7.0pF ±0.5pF GRM0332T1E7R0DD01#

8.0pF ±0.5pF GRM0332T1E8R0DD01#

9.0pF ±0.5pF GRM0332T1E9R0DD01#

10pF ±5% GRM0332T1E100JD01#

12pF ±5% GRM0332T1E120JD01#

15pF ±5% GRM0332T1E150JD01#

18pF ±5% GRM0332T1E180JD01#

22pF ±5% GRM0332T1E220JD01#

27pF ±5% GRM0332T1E270JD01#

33pF ±5% GRM0332T1E330JD01#

39pF ±5% GRM0332T1E390JD01#

47pF ±5% GRM0332T1E470JD01#

56pF ±5% GRM0332T1E560JD01#

68pF ±5% GRM0332T1E680JD01#

82pF ±5% GRM0332T1E820JD01#

100pF ±5% GRM0332T1E101JD01#

UJ 18pF ±5% GRM0333U1E180JD01#

22pF ±5% GRM0333U1E220JD01#

27pF ±5% GRM0333U1E270JD01#

33pF ±5% GRM0333U1E330JD01#

39pF ±5% GRM0333U1E390JD01#

47pF ±5% GRM0333U1E470JD01#

56pF ±5% GRM0333U1E560JD01#

68pF ±5% GRM0333U1E680JD01#

82pF ±5% GRM0333U1E820JD01#

100pF ±5% GRM0333U1E101JD01#

c 1.0×0.5mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 0.1pF ±0.1pF GRM1535C1HR10BDD5#

0.2pF ±0.1pF GRM1535C1HR20BDD5#

0.3pF ±0.1pF GRM1535C1HR30BDD5#

0.4pF ±0.1pF GRM1535C1HR40BDD5#

0.5pF ±0.1pF GRM1535C1HR50BDD5#

0.6pF ±0.1pF GRM1535C1HR60BDD5#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 0.7pF ±0.1pF GRM1535C1HR70BDD5#

0.8pF ±0.1pF GRM1535C1HR80BDD5#

0.9pF ±0.1pF GRM1535C1HR90BDD5#

1.0pF ±0.25pF GRM1535C1H1R0CDD5#

1.1pF ±0.25pF GRM1535C1H1R1CDD5#

1.2pF ±0.25pF GRM1535C1H1R2CDD5#

1.3pF ±0.25pF GRM1535C1H1R3CDD5#

1.4pF ±0.25pF GRM1535C1H1R4CDD5#

1.5pF ±0.25pF GRM1535C1H1R5CDD5#

1.6pF ±0.25pF GRM1535C1H1R6CDD5#

1.7pF ±0.25pF GRM1535C1H1R7CDD5#

1.8pF ±0.25pF GRM1535C1H1R8CDD5#

1.9pF ±0.25pF GRM1535C1H1R9CDD5#

2.0pF ±0.25pF GRM1535C1H2R0CDD5#

2.1pF ±0.25pF GRM1535C1H2R1CDD5#

2.2pF ±0.25pF GRM1535C1H2R2CDD5#

2.3pF ±0.25pF GRM1535C1H2R3CDD5#

2.4pF ±0.25pF GRM1535C1H2R4CDD5#

2.5pF ±0.25pF GRM1535C1H2R5CDD5#

2.6pF ±0.25pF GRM1535C1H2R6CDD5#

2.7pF ±0.25pF GRM1535C1H2R7CDD5#

2.8pF ±0.25pF GRM1535C1H2R8CDD5#

2.9pF ±0.25pF GRM1535C1H2R9CDD5#

3.0pF ±0.25pF GRM1535C1H3R0CDD5#

3.1pF ±0.25pF GRM1535C1H3R1CDD5#

3.2pF ±0.25pF GRM1535C1H3R2CDD5#

3.3pF ±0.25pF GRM1535C1H3R3CDD5#

3.4pF ±0.25pF GRM1535C1H3R4CDD5#

3.5pF ±0.25pF GRM1535C1H3R5CDD5#

3.6pF ±0.25pF GRM1535C1H3R6CDD5#

3.7pF ±0.25pF GRM1535C1H3R7CDD5#

3.8pF ±0.25pF GRM1535C1H3R8CDD5#

3.9pF ±0.25pF GRM1535C1H3R9CDD5#

4.0pF ±0.25pF GRM1535C1H4R0CDD5#

4.1pF ±0.25pF GRM1535C1H4R1CDD5#

4.2pF ±0.25pF GRM1535C1H4R2CDD5#

4.3pF ±0.25pF GRM1535C1H4R3CDD5#

4.4pF ±0.25pF GRM1535C1H4R4CDD5#

4.5pF ±0.25pF GRM1535C1H4R5CDD5#

4.6pF ±0.25pF GRM1535C1H4R6CDD5#

4.7pF ±0.25pF GRM1535C1H4R7CDD5#

4.8pF ±0.25pF GRM1535C1H4R8CDD5#

4.9pF ±0.25pF GRM1535C1H4R9CDD5#

5.0pF ±0.25pF GRM1535C1H5R0CDD5#

5.1pF ±0.5pF GRM1535C1H5R1DDD5#

5.2pF ±0.5pF GRM1535C1H5R2DDD5#

5.3pF ±0.5pF GRM1535C1H5R3DDD5#

5.4pF ±0.5pF GRM1535C1H5R4DDD5#

5.5pF ±0.5pF GRM1535C1H5R5DDD5#

5.6pF ±0.5pF GRM1535C1H5R6DDD5#

5.7pF ±0.5pF GRM1535C1H5R7DDD5#

5.8pF ±0.5pF GRM1535C1H5R8DDD5#

5.9pF ±0.5pF GRM1535C1H5R9DDD5#

6.0pF ±0.5pF GRM1535C1H6R0DDD5#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 6.1pF ±0.5pF GRM1535C1H6R1DDD5#

6.2pF ±0.5pF GRM1535C1H6R2DDD5#

6.3pF ±0.5pF GRM1535C1H6R3DDD5#

6.4pF ±0.5pF GRM1535C1H6R4DDD5#

6.5pF ±0.5pF GRM1535C1H6R5DDD5#

6.6pF ±0.5pF GRM1535C1H6R6DDD5#

6.7pF ±0.5pF GRM1535C1H6R7DDD5#

6.8pF ±0.5pF GRM1535C1H6R8DDD5#

6.9pF ±0.5pF GRM1535C1H6R9DDD5#

7.0pF ±0.5pF GRM1535C1H7R0DDD5#

7.1pF ±0.5pF GRM1535C1H7R1DDD5#

7.2pF ±0.5pF GRM1535C1H7R2DDD5#

7.3pF ±0.5pF GRM1535C1H7R3DDD5#

7.4pF ±0.5pF GRM1535C1H7R4DDD5#

7.5pF ±0.5pF GRM1535C1H7R5DDD5#

7.6pF ±0.5pF GRM1535C1H7R6DDD5#

7.7pF ±0.5pF GRM1535C1H7R7DDD5#

7.8pF ±0.5pF GRM1535C1H7R8DDD5#

7.9pF ±0.5pF GRM1535C1H7R9DDD5#

8.0pF ±0.5pF GRM1535C1H8R0DDD5#

8.1pF ±0.5pF GRM1535C1H8R1DDD5#

8.2pF ±0.5pF GRM1535C1H8R2DDD5#

8.3pF ±0.5pF GRM1535C1H8R3DDD5#

8.4pF ±0.5pF GRM1535C1H8R4DDD5#

8.5pF ±0.5pF GRM1535C1H8R5DDD5#

8.6pF ±0.5pF GRM1535C1H8R6DDD5#

8.7pF ±0.5pF GRM1535C1H8R7DDD5#

8.8pF ±0.5pF GRM1535C1H8R8DDD5#

8.9pF ±0.5pF GRM1535C1H8R9DDD5#

9.0pF ±0.5pF GRM1535C1H9R0DDD5#

9.1pF ±0.5pF GRM1535C1H9R1DDD5#

9.2pF ±0.5pF GRM1535C1H9R2DDD5#

9.3pF ±0.5pF GRM1535C1H9R3DDD5#

9.4pF ±0.5pF GRM1535C1H9R4DDD5#

9.5pF ±0.5pF GRM1535C1H9R5DDD5#

9.6pF ±0.5pF GRM1535C1H9R6DDD5#

9.7pF ±0.5pF GRM1535C1H9R7DDD5#

9.8pF ±0.5pF GRM1535C1H9R8DDD5#

9.9pF ±0.5pF GRM1535C1H9R9DDD5#

10pF ±5% GRM1535C1H100JDD5#

12pF ±5% GRM1535C1H120JDD5#

15pF ±5% GRM1535C1H150JDD5#

18pF ±5% GRM1535C1H180JDD5#

22pF ±5% GRM1535C1H220JDD5#

27pF ±5% GRM1535C1H270JDD5#

33pF ±5% GRM1535C1H330JDD5#

39pF ±5% GRM1535C1H390JDD5#

47pF ±5% GRM1535C1H470JDD5#

56pF ±5% GRM1535C1H560JDD5#

68pF ±5% GRM1535C1H680JDD5#

82pF ±5% GRM1535C1H820JDD5#

100pF ±5% GRM1535C1H101JDD5#

120pF ±5% GRM1535C1H121JDD5#

150pF ±5% GRM1535C1H151JDD5#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc C0G 180pF ±5% GRM1535C1H181JDD5#

220pF ±5% GRM1535C1H221JDD5#

270pF ±5% GRM1535C1H271JDD5#

330pF ±5% GRM1535C1H331JDD5#

390pF ±5% GRM1535C1H391JDD5#

470pF ±5% GRM1535C1H471JDD5#

560pF ±5% GRM1535C1H561JDD5#

680pF ±5% GRM1535C1H681JDD5#

CK 0.1pF ±0.1pF GRM1534C1HR10BDD5#

0.2pF ±0.1pF GRM1534C1HR20BDD5#

0.3pF ±0.1pF GRM1534C1HR30BDD5#

0.4pF ±0.1pF GRM1534C1HR40BDD5#

0.5pF ±0.1pF GRM1534C1HR50BDD5#

0.6pF ±0.1pF GRM1534C1HR60BDD5#

0.7pF ±0.1pF GRM1534C1HR70BDD5#

0.8pF ±0.1pF GRM1534C1HR80BDD5#

0.9pF ±0.1pF GRM1534C1HR90BDD5#

1.0pF ±0.25pF GRM1534C1H1R0CDD5#

1.1pF ±0.25pF GRM1534C1H1R1CDD5#

1.2pF ±0.25pF GRM1534C1H1R2CDD5#

1.3pF ±0.25pF GRM1534C1H1R3CDD5#

1.4pF ±0.25pF GRM1534C1H1R4CDD5#

1.5pF ±0.25pF GRM1534C1H1R5CDD5#

1.6pF ±0.25pF GRM1534C1H1R6CDD5#

1.7pF ±0.25pF GRM1534C1H1R7CDD5#

1.8pF ±0.25pF GRM1534C1H1R8CDD5#

1.9pF ±0.25pF GRM1534C1H1R9CDD5#

2.0pF ±0.25pF GRM1534C1H2R0CDD5#

CJ 2.1pF ±0.25pF GRM1533C1H2R1CDD5#

2.2pF ±0.25pF GRM1533C1H2R2CDD5#

2.3pF ±0.25pF GRM1533C1H2R3CDD5#

2.4pF ±0.25pF GRM1533C1H2R4CDD5#

2.5pF ±0.25pF GRM1533C1H2R5CDD5#

2.6pF ±0.25pF GRM1533C1H2R6CDD5#

2.7pF ±0.25pF GRM1533C1H2R7CDD5#

2.8pF ±0.25pF GRM1533C1H2R8CDD5#

2.9pF ±0.25pF GRM1533C1H2R9CDD5#

3.0pF ±0.25pF GRM1533C1H3R0CDD5#

3.1pF ±0.25pF GRM1533C1H3R1CDD5#

3.2pF ±0.25pF GRM1533C1H3R2CDD5#

3.3pF ±0.25pF GRM1533C1H3R3CDD5#

3.4pF ±0.25pF GRM1533C1H3R4CDD5#

3.5pF ±0.25pF GRM1533C1H3R5CDD5#

3.6pF ±0.25pF GRM1533C1H3R6CDD5#

3.7pF ±0.25pF GRM1533C1H3R7CDD5#

3.8pF ±0.25pF GRM1533C1H3R8CDD5#

3.9pF ±0.25pF GRM1533C1H3R9CDD5#

CH 4.0pF ±0.25pF GRM1532C1H4R0CDD5#

4.1pF ±0.25pF GRM1532C1H4R1CDD5#

4.2pF ±0.25pF GRM1532C1H4R2CDD5#

4.3pF ±0.25pF GRM1532C1H4R3CDD5#

4.4pF ±0.25pF GRM1532C1H4R4CDD5#

4.5pF ±0.25pF GRM1532C1H4R5CDD5#

4.6pF ±0.25pF GRM1532C1H4R6CDD5#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CH 4.7pF ±0.25pF GRM1532C1H4R7CDD5#

4.8pF ±0.25pF GRM1532C1H4R8CDD5#

4.9pF ±0.25pF GRM1532C1H4R9CDD5#

5.0pF ±0.25pF GRM1532C1H5R0CDD5#

5.1pF ±0.5pF GRM1532C1H5R1DDD5#

5.2pF ±0.5pF GRM1532C1H5R2DDD5#

5.3pF ±0.5pF GRM1532C1H5R3DDD5#

5.4pF ±0.5pF GRM1532C1H5R4DDD5#

5.5pF ±0.5pF GRM1532C1H5R5DDD5#

5.6pF ±0.5pF GRM1532C1H5R6DDD5#

5.7pF ±0.5pF GRM1532C1H5R7DDD5#

5.8pF ±0.5pF GRM1532C1H5R8DDD5#

5.9pF ±0.5pF GRM1532C1H5R9DDD5#

6.0pF ±0.5pF GRM1532C1H6R0DDD5#

6.1pF ±0.5pF GRM1532C1H6R1DDD5#

6.2pF ±0.5pF GRM1532C1H6R2DDD5#

6.3pF ±0.5pF GRM1532C1H6R3DDD5#

6.4pF ±0.5pF GRM1532C1H6R4DDD5#

6.5pF ±0.5pF GRM1532C1H6R5DDD5#

6.6pF ±0.5pF GRM1532C1H6R6DDD5#

6.7pF ±0.5pF GRM1532C1H6R7DDD5#

6.8pF ±0.5pF GRM1532C1H6R8DDD5#

6.9pF ±0.5pF GRM1532C1H6R9DDD5#

7.0pF ±0.5pF GRM1532C1H7R0DDD5#

7.1pF ±0.5pF GRM1532C1H7R1DDD5#

7.2pF ±0.5pF GRM1532C1H7R2DDD5#

7.3pF ±0.5pF GRM1532C1H7R3DDD5#

7.4pF ±0.5pF GRM1532C1H7R4DDD5#

7.5pF ±0.5pF GRM1532C1H7R5DDD5#

7.6pF ±0.5pF GRM1532C1H7R6DDD5#

7.7pF ±0.5pF GRM1532C1H7R7DDD5#

7.8pF ±0.5pF GRM1532C1H7R8DDD5#

7.9pF ±0.5pF GRM1532C1H7R9DDD5#

8.0pF ±0.5pF GRM1532C1H8R0DDD5#

8.1pF ±0.5pF GRM1532C1H8R1DDD5#

8.2pF ±0.5pF GRM1532C1H8R2DDD5#

8.3pF ±0.5pF GRM1532C1H8R3DDD5#

8.4pF ±0.5pF GRM1532C1H8R4DDD5#

8.5pF ±0.5pF GRM1532C1H8R5DDD5#

8.6pF ±0.5pF GRM1532C1H8R6DDD5#

8.7pF ±0.5pF GRM1532C1H8R7DDD5#

8.8pF ±0.5pF GRM1532C1H8R8DDD5#

8.9pF ±0.5pF GRM1532C1H8R9DDD5#

9.0pF ±0.5pF GRM1532C1H9R0DDD5#

9.1pF ±0.5pF GRM1532C1H9R1DDD5#

9.2pF ±0.5pF GRM1532C1H9R2DDD5#

9.3pF ±0.5pF GRM1532C1H9R3DDD5#

9.4pF ±0.5pF GRM1532C1H9R4DDD5#

9.5pF ±0.5pF GRM1532C1H9R5DDD5#

9.6pF ±0.5pF GRM1532C1H9R6DDD5#

9.7pF ±0.5pF GRM1532C1H9R7DDD5#

9.8pF ±0.5pF GRM1532C1H9R8DDD5#

9.9pF ±0.5pF GRM1532C1H9R9DDD5#

10pF ±5% GRM1532C1H100JDD5#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc CH 12pF ±5% GRM1532C1H120JDD5#

15pF ±5% GRM1532C1H150JDD5#

18pF ±5% GRM1532C1H180JDD5#

22pF ±5% GRM1532C1H220JDD5#

27pF ±5% GRM1532C1H270JDD5#

33pF ±5% GRM1532C1H330JDD5#

39pF ±5% GRM1532C1H390JDD5#

47pF ±5% GRM1532C1H470JDD5#

56pF ±5% GRM1532C1H560JDD5#

68pF ±5% GRM1532C1H680JDD5#

82pF ±5% GRM1532C1H820JDD5#

100pF ±5% GRM1532C1H101JDD5#

120pF ±5% GRM1532C1H121JDD5#

150pF ±5% GRM1532C1H151JDD5#

180pF ±5% GRM1532C1H181JDD5#

220pF ±5% GRM1532C1H221JDD5#

270pF ±5% GRM1532C1H271JDD5#

330pF ±5% GRM1532C1H331JDD5#

390pF ±5% GRM1532C1H391JDD5#

470pF ±5% GRM1532C1H471JDD5#

560pF ±5% GRM1532C1H561JDD5#

680pF ±5% GRM1532C1H681JDD5#

0.55mm 50Vdc C0G 0.1pF ±0.05pF GRM1555C1HR10WA01#

±0.1pF GRM1555C1HR10BA01#

0.2pF ±0.05pF GRM1555C1HR20WA01#

±0.1pF GRM1555C1HR20BA01#

0.3pF ±0.05pF GRM1555C1HR30WA01#

±0.1pF GRM1555C1HR30BA01#

0.4pF ±0.05pF GRM1555C1HR40WA01#

±0.1pF GRM1555C1HR40BA01#

0.5pF ±0.05pF GRM1555C1HR50WA01#

±0.1pF GRM1555C1HR50BA01#

0.6pF ±0.05pF GRM1555C1HR60WA01#

±0.1pF GRM1555C1HR60BA01#

0.7pF ±0.05pF GRM1555C1HR70WA01#

±0.1pF GRM1555C1HR70BA01#

0.8pF ±0.05pF GRM1555C1HR80WA01#

±0.1pF GRM1555C1HR80BA01#

0.9pF ±0.05pF GRM1555C1HR90WA01#

±0.1pF GRM1555C1HR90BA01#

1.0pF ±0.05pF GRM1555C1H1R0WA01#

±0.1pF GRM1555C1H1R0BA01#

±0.25pF GRM1555C1H1R0CA01#

1.1pF ±0.05pF GRM1555C1H1R1WA01#

±0.1pF GRM1555C1H1R1BA01#

±0.25pF GRM1555C1H1R1CA01#

1.2pF ±0.05pF GRM1555C1H1R2WA01#

±0.1pF GRM1555C1H1R2BA01#

±0.25pF GRM1555C1H1R2CA01#

1.3pF ±0.05pF GRM1555C1H1R3WA01#

±0.1pF GRM1555C1H1R3BA01#

±0.25pF GRM1555C1H1R3CA01#

1.4pF ±0.05pF GRM1555C1H1R4WA01#

±0.1pF GRM1555C1H1R4BA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 1.4pF ±0.25pF GRM1555C1H1R4CA01#

1.5pF ±0.05pF GRM1555C1H1R5WA01#

±0.1pF GRM1555C1H1R5BA01#

±0.25pF GRM1555C1H1R5CA01#

1.6pF ±0.05pF GRM1555C1H1R6WA01#

±0.1pF GRM1555C1H1R6BA01#

±0.25pF GRM1555C1H1R6CA01#

1.7pF ±0.05pF GRM1555C1H1R7WA01#

±0.1pF GRM1555C1H1R7BA01#

±0.25pF GRM1555C1H1R7CA01#

1.8pF ±0.05pF GRM1555C1H1R8WA01#

±0.1pF GRM1555C1H1R8BA01#

±0.25pF GRM1555C1H1R8CA01#

1.9pF ±0.05pF GRM1555C1H1R9WA01#

±0.1pF GRM1555C1H1R9BA01#

±0.25pF GRM1555C1H1R9CA01#

2.0pF ±0.05pF GRM1555C1H2R0WA01#

±0.1pF GRM1555C1H2R0BA01#

±0.25pF GRM1555C1H2R0CA01#

2.1pF ±0.05pF GRM1555C1H2R1WA01#

±0.1pF GRM1555C1H2R1BA01#

±0.25pF GRM1555C1H2R1CA01#

2.2pF ±0.05pF GRM1555C1H2R2WA01#

±0.1pF GRM1555C1H2R2BA01#

±0.25pF GRM1555C1H2R2CA01#

2.3pF ±0.05pF GRM1555C1H2R3WA01#

±0.1pF GRM1555C1H2R3BA01#

±0.25pF GRM1555C1H2R3CA01#

2.4pF ±0.05pF GRM1555C1H2R4WA01#

±0.1pF GRM1555C1H2R4BA01#

±0.25pF GRM1555C1H2R4CA01#

2.5pF ±0.05pF GRM1555C1H2R5WA01#

±0.1pF GRM1555C1H2R5BA01#

±0.25pF GRM1555C1H2R5CA01#

2.6pF ±0.05pF GRM1555C1H2R6WA01#

±0.1pF GRM1555C1H2R6BA01#

±0.25pF GRM1555C1H2R6CA01#

2.7pF ±0.05pF GRM1555C1H2R7WA01#

±0.1pF GRM1555C1H2R7BA01#

±0.25pF GRM1555C1H2R7CA01#

2.8pF ±0.05pF GRM1555C1H2R8WA01#

±0.1pF GRM1555C1H2R8BA01#

±0.25pF GRM1555C1H2R8CA01#

2.9pF ±0.05pF GRM1555C1H2R9WA01#

±0.1pF GRM1555C1H2R9BA01#

±0.25pF GRM1555C1H2R9CA01#

3.0pF ±0.05pF GRM1555C1H3R0WA01#

±0.1pF GRM1555C1H3R0BA01#

±0.25pF GRM1555C1H3R0CA01#

3.1pF ±0.05pF GRM1555C1H3R1WA01#

±0.1pF GRM1555C1H3R1BA01#

±0.25pF GRM1555C1H3R1CA01#

3.2pF ±0.05pF GRM1555C1H3R2WA01#

±0.1pF GRM1555C1H3R2BA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 3.2pF ±0.25pF GRM1555C1H3R2CA01#

3.3pF ±0.05pF GRM1555C1H3R3WA01#

±0.1pF GRM1555C1H3R3BA01#

±0.25pF GRM1555C1H3R3CA01#

3.4pF ±0.05pF GRM1555C1H3R4WA01#

±0.1pF GRM1555C1H3R4BA01#

±0.25pF GRM1555C1H3R4CA01#

3.5pF ±0.05pF GRM1555C1H3R5WA01#

±0.1pF GRM1555C1H3R5BA01#

±0.25pF GRM1555C1H3R5CA01#

3.6pF ±0.05pF GRM1555C1H3R6WA01#

±0.1pF GRM1555C1H3R6BA01#

±0.25pF GRM1555C1H3R6CA01#

3.7pF ±0.05pF GRM1555C1H3R7WA01#

±0.1pF GRM1555C1H3R7BA01#

±0.25pF GRM1555C1H3R7CA01#

3.8pF ±0.05pF GRM1555C1H3R8WA01#

±0.1pF GRM1555C1H3R8BA01#

±0.25pF GRM1555C1H3R8CA01#

3.9pF ±0.05pF GRM1555C1H3R9WA01#

±0.1pF GRM1555C1H3R9BA01#

±0.25pF GRM1555C1H3R9CA01#

4.0pF ±0.05pF GRM1555C1H4R0WA01#

±0.1pF GRM1555C1H4R0BA01#

±0.25pF GRM1555C1H4R0CA01#

4.1pF ±0.05pF GRM1555C1H4R1WA01#

±0.1pF GRM1555C1H4R1BA01#

±0.25pF GRM1555C1H4R1CA01#

4.2pF ±0.05pF GRM1555C1H4R2WA01#

±0.1pF GRM1555C1H4R2BA01#

±0.25pF GRM1555C1H4R2CA01#

4.3pF ±0.05pF GRM1555C1H4R3WA01#

±0.1pF GRM1555C1H4R3BA01#

±0.25pF GRM1555C1H4R3CA01#

4.4pF ±0.05pF GRM1555C1H4R4WA01#

±0.1pF GRM1555C1H4R4BA01#

±0.25pF GRM1555C1H4R4CA01#

4.5pF ±0.05pF GRM1555C1H4R5WA01#

±0.1pF GRM1555C1H4R5BA01#

±0.25pF GRM1555C1H4R5CA01#

4.6pF ±0.05pF GRM1555C1H4R6WA01#

±0.1pF GRM1555C1H4R6BA01#

±0.25pF GRM1555C1H4R6CA01#

4.7pF ±0.05pF GRM1555C1H4R7WA01#

±0.1pF GRM1555C1H4R7BA01#

±0.25pF GRM1555C1H4R7CA01#

4.8pF ±0.05pF GRM1555C1H4R8WA01#

±0.1pF GRM1555C1H4R8BA01#

±0.25pF GRM1555C1H4R8CA01#

4.9pF ±0.05pF GRM1555C1H4R9WA01#

±0.1pF GRM1555C1H4R9BA01#

±0.25pF GRM1555C1H4R9CA01#

5.0pF ±0.05pF GRM1555C1H5R0WA01#

±0.1pF GRM1555C1H5R0BA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 5.0pF ±0.25pF GRM1555C1H5R0CA01#

5.1pF ±0.05pF GRM1555C1H5R1WA01#

±0.1pF GRM1555C1H5R1BA01#

±0.25pF GRM1555C1H5R1CA01#

±0.5pF GRM1555C1H5R1DA01#

5.2pF ±0.05pF GRM1555C1H5R2WA01#

±0.1pF GRM1555C1H5R2BA01#

±0.25pF GRM1555C1H5R2CA01#

±0.5pF GRM1555C1H5R2DA01#

5.3pF ±0.05pF GRM1555C1H5R3WA01#

±0.1pF GRM1555C1H5R3BA01#

±0.25pF GRM1555C1H5R3CA01#

±0.5pF GRM1555C1H5R3DA01#

5.4pF ±0.05pF GRM1555C1H5R4WA01#

±0.1pF GRM1555C1H5R4BA01#

±0.25pF GRM1555C1H5R4CA01#

±0.5pF GRM1555C1H5R4DA01#

5.5pF ±0.05pF GRM1555C1H5R5WA01#

±0.1pF GRM1555C1H5R5BA01#

±0.25pF GRM1555C1H5R5CA01#

±0.5pF GRM1555C1H5R5DA01#

5.6pF ±0.05pF GRM1555C1H5R6WA01#

±0.1pF GRM1555C1H5R6BA01#

±0.25pF GRM1555C1H5R6CA01#

±0.5pF GRM1555C1H5R6DA01#

5.7pF ±0.05pF GRM1555C1H5R7WA01#

±0.1pF GRM1555C1H5R7BA01#

±0.25pF GRM1555C1H5R7CA01#

±0.5pF GRM1555C1H5R7DA01#

5.8pF ±0.05pF GRM1555C1H5R8WA01#

±0.1pF GRM1555C1H5R8BA01#

±0.25pF GRM1555C1H5R8CA01#

±0.5pF GRM1555C1H5R8DA01#

5.9pF ±0.05pF GRM1555C1H5R9WA01#

±0.1pF GRM1555C1H5R9BA01#

±0.25pF GRM1555C1H5R9CA01#

±0.5pF GRM1555C1H5R9DA01#

6.0pF ±0.05pF GRM1555C1H6R0WA01#

±0.1pF GRM1555C1H6R0BA01#

±0.25pF GRM1555C1H6R0CA01#

±0.5pF GRM1555C1H6R0DA01#

6.1pF ±0.05pF GRM1555C1H6R1WA01#

±0.1pF GRM1555C1H6R1BA01#

±0.25pF GRM1555C1H6R1CA01#

±0.5pF GRM1555C1H6R1DA01#

6.2pF ±0.05pF GRM1555C1H6R2WA01#

±0.1pF GRM1555C1H6R2BA01#

±0.25pF GRM1555C1H6R2CA01#

±0.5pF GRM1555C1H6R2DA01#

6.3pF ±0.05pF GRM1555C1H6R3WA01#

±0.1pF GRM1555C1H6R3BA01#

±0.25pF GRM1555C1H6R3CA01#

±0.5pF GRM1555C1H6R3DA01#

6.4pF ±0.05pF GRM1555C1H6R4WA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 6.4pF ±0.1pF GRM1555C1H6R4BA01#

±0.25pF GRM1555C1H6R4CA01#

±0.5pF GRM1555C1H6R4DA01#

6.5pF ±0.05pF GRM1555C1H6R5WA01#

±0.1pF GRM1555C1H6R5BA01#

±0.25pF GRM1555C1H6R5CA01#

±0.5pF GRM1555C1H6R5DA01#

6.6pF ±0.05pF GRM1555C1H6R6WA01#

±0.1pF GRM1555C1H6R6BA01#

±0.25pF GRM1555C1H6R6CA01#

±0.5pF GRM1555C1H6R6DA01#

6.7pF ±0.05pF GRM1555C1H6R7WA01#

±0.1pF GRM1555C1H6R7BA01#

±0.25pF GRM1555C1H6R7CA01#

±0.5pF GRM1555C1H6R7DA01#

6.8pF ±0.05pF GRM1555C1H6R8WA01#

±0.1pF GRM1555C1H6R8BA01#

±0.25pF GRM1555C1H6R8CA01#

±0.5pF GRM1555C1H6R8DA01#

6.9pF ±0.05pF GRM1555C1H6R9WA01#

±0.1pF GRM1555C1H6R9BA01#

±0.25pF GRM1555C1H6R9CA01#

±0.5pF GRM1555C1H6R9DA01#

7.0pF ±0.05pF GRM1555C1H7R0WA01#

±0.1pF GRM1555C1H7R0BA01#

±0.25pF GRM1555C1H7R0CA01#

±0.5pF GRM1555C1H7R0DA01#

7.1pF ±0.05pF GRM1555C1H7R1WA01#

±0.1pF GRM1555C1H7R1BA01#

±0.25pF GRM1555C1H7R1CA01#

±0.5pF GRM1555C1H7R1DA01#

7.2pF ±0.05pF GRM1555C1H7R2WA01#

±0.1pF GRM1555C1H7R2BA01#

±0.25pF GRM1555C1H7R2CA01#

±0.5pF GRM1555C1H7R2DA01#

7.3pF ±0.05pF GRM1555C1H7R3WA01#

±0.1pF GRM1555C1H7R3BA01#

±0.25pF GRM1555C1H7R3CA01#

±0.5pF GRM1555C1H7R3DA01#

7.4pF ±0.05pF GRM1555C1H7R4WA01#

±0.1pF GRM1555C1H7R4BA01#

±0.25pF GRM1555C1H7R4CA01#

±0.5pF GRM1555C1H7R4DA01#

7.5pF ±0.05pF GRM1555C1H7R5WA01#

±0.1pF GRM1555C1H7R5BA01#

±0.25pF GRM1555C1H7R5CA01#

±0.5pF GRM1555C1H7R5DA01#

7.6pF ±0.05pF GRM1555C1H7R6WA01#

±0.1pF GRM1555C1H7R6BA01#

±0.25pF GRM1555C1H7R6CA01#

±0.5pF GRM1555C1H7R6DA01#

7.7pF ±0.05pF GRM1555C1H7R7WA01#

±0.1pF GRM1555C1H7R7BA01#

±0.25pF GRM1555C1H7R7CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 7.7pF ±0.5pF GRM1555C1H7R7DA01#

7.8pF ±0.05pF GRM1555C1H7R8WA01#

±0.1pF GRM1555C1H7R8BA01#

±0.25pF GRM1555C1H7R8CA01#

±0.5pF GRM1555C1H7R8DA01#

7.9pF ±0.05pF GRM1555C1H7R9WA01#

±0.1pF GRM1555C1H7R9BA01#

±0.25pF GRM1555C1H7R9CA01#

±0.5pF GRM1555C1H7R9DA01#

8.0pF ±0.05pF GRM1555C1H8R0WA01#

±0.1pF GRM1555C1H8R0BA01#

±0.25pF GRM1555C1H8R0CA01#

±0.5pF GRM1555C1H8R0DA01#

8.1pF ±0.05pF GRM1555C1H8R1WA01#

±0.1pF GRM1555C1H8R1BA01#

±0.25pF GRM1555C1H8R1CA01#

±0.5pF GRM1555C1H8R1DA01#

8.2pF ±0.05pF GRM1555C1H8R2WA01#

±0.1pF GRM1555C1H8R2BA01#

±0.25pF GRM1555C1H8R2CA01#

±0.5pF GRM1555C1H8R2DA01#

8.3pF ±0.05pF GRM1555C1H8R3WA01#

±0.1pF GRM1555C1H8R3BA01#

±0.25pF GRM1555C1H8R3CA01#

±0.5pF GRM1555C1H8R3DA01#

8.4pF ±0.05pF GRM1555C1H8R4WA01#

±0.1pF GRM1555C1H8R4BA01#

±0.25pF GRM1555C1H8R4CA01#

±0.5pF GRM1555C1H8R4DA01#

8.5pF ±0.05pF GRM1555C1H8R5WA01#

±0.1pF GRM1555C1H8R5BA01#

±0.25pF GRM1555C1H8R5CA01#

±0.5pF GRM1555C1H8R5DA01#

8.6pF ±0.05pF GRM1555C1H8R6WA01#

±0.1pF GRM1555C1H8R6BA01#

±0.25pF GRM1555C1H8R6CA01#

±0.5pF GRM1555C1H8R6DA01#

8.7pF ±0.05pF GRM1555C1H8R7WA01#

±0.1pF GRM1555C1H8R7BA01#

±0.25pF GRM1555C1H8R7CA01#

±0.5pF GRM1555C1H8R7DA01#

8.8pF ±0.05pF GRM1555C1H8R8WA01#

±0.1pF GRM1555C1H8R8BA01#

±0.25pF GRM1555C1H8R8CA01#

±0.5pF GRM1555C1H8R8DA01#

8.9pF ±0.05pF GRM1555C1H8R9WA01#

±0.1pF GRM1555C1H8R9BA01#

±0.25pF GRM1555C1H8R9CA01#

±0.5pF GRM1555C1H8R9DA01#

9.0pF ±0.05pF GRM1555C1H9R0WA01#

±0.1pF GRM1555C1H9R0BA01#

±0.25pF GRM1555C1H9R0CA01#

±0.5pF GRM1555C1H9R0DA01#

9.1pF ±0.05pF GRM1555C1H9R1WA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 9.1pF ±0.1pF GRM1555C1H9R1BA01#

±0.25pF GRM1555C1H9R1CA01#

±0.5pF GRM1555C1H9R1DA01#

9.2pF ±0.05pF GRM1555C1H9R2WA01#

±0.1pF GRM1555C1H9R2BA01#

±0.25pF GRM1555C1H9R2CA01#

±0.5pF GRM1555C1H9R2DA01#

9.3pF ±0.05pF GRM1555C1H9R3WA01#

±0.1pF GRM1555C1H9R3BA01#

±0.25pF GRM1555C1H9R3CA01#

±0.5pF GRM1555C1H9R3DA01#

9.4pF ±0.05pF GRM1555C1H9R4WA01#

±0.1pF GRM1555C1H9R4BA01#

±0.25pF GRM1555C1H9R4CA01#

±0.5pF GRM1555C1H9R4DA01#

9.5pF ±0.05pF GRM1555C1H9R5WA01#

±0.1pF GRM1555C1H9R5BA01#

±0.25pF GRM1555C1H9R5CA01#

±0.5pF GRM1555C1H9R5DA01#

9.6pF ±0.05pF GRM1555C1H9R6WA01#

±0.1pF GRM1555C1H9R6BA01#

±0.25pF GRM1555C1H9R6CA01#

±0.5pF GRM1555C1H9R6DA01#

9.7pF ±0.05pF GRM1555C1H9R7WA01#

±0.1pF GRM1555C1H9R7BA01#

±0.25pF GRM1555C1H9R7CA01#

±0.5pF GRM1555C1H9R7DA01#

9.8pF ±0.05pF GRM1555C1H9R8WA01#

±0.1pF GRM1555C1H9R8BA01#

±0.25pF GRM1555C1H9R8CA01#

±0.5pF GRM1555C1H9R8DA01#

9.9pF ±0.05pF GRM1555C1H9R9WA01#

±0.1pF GRM1555C1H9R9BA01#

±0.25pF GRM1555C1H9R9CA01#

±0.5pF GRM1555C1H9R9DA01#

10pF ±2% GRM1555C1H100GA01#

±5% GRM1555C1H100JA01#

12pF ±2% GRM1555C1H120GA01#

±5% GRM1555C1H120JA01#

15pF ±2% GRM1555C1H150GA01#

±5% GRM1555C1H150JA01#

18pF ±2% GRM1555C1H180GA01#

±5% GRM1555C1H180JA01#

22pF ±2% GRM1555C1H220GA01#

±5% GRM1555C1H220JA01#

27pF ±2% GRM1555C1H270GA01#

±5% GRM1555C1H270JA01#

33pF ±2% GRM1555C1H330GA01#

±5% GRM1555C1H330JA01#

39pF ±2% GRM1555C1H390GA01#

±5% GRM1555C1H390JA01#

47pF ±2% GRM1555C1H470GA01#

±5% GRM1555C1H470JA01#

56pF ±2% GRM1555C1H560GA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 56pF ±5% GRM1555C1H560JA01#

68pF ±2% GRM1555C1H680GA01#

±5% GRM1555C1H680JA01#

82pF ±2% GRM1555C1H820GA01#

±5% GRM1555C1H820JA01#

100pF ±2% GRM1555C1H101GA01#

±5% GRM1555C1H101JA01#

120pF ±2% GRM1555C1H121GA01#

±5% GRM1555C1H121JA01#

150pF ±2% GRM1555C1H151GA01#

±5% GRM1555C1H151JA01#

180pF ±2% GRM1555C1H181GA01#

±5% GRM1555C1H181JA01#

220pF ±2% GRM1555C1H221GA01#

±5% GRM1555C1H221JA01#

270pF ±2% GRM1555C1H271GA01#

±5% GRM1555C1H271JA01#

330pF ±2% GRM1555C1H331GA01#

±5% GRM1555C1H331JA01#

390pF ±2% GRM1555C1H391GA01#

±5% GRM1555C1H391JA01#

470pF ±2% GRM1555C1H471GA01#

±5% GRM1555C1H471JA01#

560pF ±2% GRM1555C1H561GA01#

±5% GRM1555C1H561JA01#

680pF ±2% GRM1555C1H681GA01#

±5% GRM1555C1H681JA01#

820pF ±2% GRM1555C1H821GA01#

±5% GRM1555C1H821JA01#

1000pF ±2% GRM1555C1H102GA01#

±5% GRM1555C1H102JA01#

CK 0.1pF ±0.05pF GRM1554C1HR10WA01#

±0.1pF GRM1554C1HR10BA01#

0.2pF ±0.05pF GRM1554C1HR20WA01#

±0.1pF GRM1554C1HR20BA01#

0.3pF ±0.05pF GRM1554C1HR30WA01#

±0.1pF GRM1554C1HR30BA01#

0.4pF ±0.05pF GRM1554C1HR40WA01#

±0.1pF GRM1554C1HR40BA01#

0.5pF ±0.05pF GRM1554C1HR50WA01#

±0.1pF GRM1554C1HR50BA01#

0.6pF ±0.05pF GRM1554C1HR60WA01#

±0.1pF GRM1554C1HR60BA01#

0.7pF ±0.05pF GRM1554C1HR70WA01#

±0.1pF GRM1554C1HR70BA01#

0.8pF ±0.05pF GRM1554C1HR80WA01#

±0.1pF GRM1554C1HR80BA01#

0.9pF ±0.05pF GRM1554C1HR90WA01#

±0.1pF GRM1554C1HR90BA01#

1.0pF ±0.05pF GRM1554C1H1R0WA01#

±0.1pF GRM1554C1H1R0BA01#

±0.25pF GRM1554C1H1R0CA01#

1.1pF ±0.05pF GRM1554C1H1R1WA01#

±0.1pF GRM1554C1H1R1BA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CK 1.1pF ±0.25pF GRM1554C1H1R1CA01#

1.2pF ±0.05pF GRM1554C1H1R2WA01#

±0.1pF GRM1554C1H1R2BA01#

±0.25pF GRM1554C1H1R2CA01#

1.3pF ±0.05pF GRM1554C1H1R3WA01#

±0.1pF GRM1554C1H1R3BA01#

±0.25pF GRM1554C1H1R3CA01#

1.4pF ±0.05pF GRM1554C1H1R4WA01#

±0.1pF GRM1554C1H1R4BA01#

±0.25pF GRM1554C1H1R4CA01#

1.5pF ±0.05pF GRM1554C1H1R5WA01#

±0.1pF GRM1554C1H1R5BA01#

±0.25pF GRM1554C1H1R5CA01#

1.6pF ±0.05pF GRM1554C1H1R6WA01#

±0.1pF GRM1554C1H1R6BA01#

±0.25pF GRM1554C1H1R6CA01#

1.7pF ±0.05pF GRM1554C1H1R7WA01#

±0.1pF GRM1554C1H1R7BA01#

±0.25pF GRM1554C1H1R7CA01#

1.8pF ±0.05pF GRM1554C1H1R8WA01#

±0.1pF GRM1554C1H1R8BA01#

±0.25pF GRM1554C1H1R8CA01#

1.9pF ±0.05pF GRM1554C1H1R9WA01#

±0.1pF GRM1554C1H1R9BA01#

±0.25pF GRM1554C1H1R9CA01#

2.0pF ±0.05pF GRM1554C1H2R0WA01#

±0.1pF GRM1554C1H2R0BA01#

±0.25pF GRM1554C1H2R0CA01#

CJ 2.1pF ±0.05pF GRM1553C1H2R1WA01#

±0.1pF GRM1553C1H2R1BA01#

±0.25pF GRM1553C1H2R1CA01#

2.2pF ±0.05pF GRM1553C1H2R2WA01#

±0.1pF GRM1553C1H2R2BA01#

±0.25pF GRM1553C1H2R2CA01#

2.3pF ±0.05pF GRM1553C1H2R3WA01#

±0.1pF GRM1553C1H2R3BA01#

±0.25pF GRM1553C1H2R3CA01#

2.4pF ±0.05pF GRM1553C1H2R4WA01#

±0.1pF GRM1553C1H2R4BA01#

±0.25pF GRM1553C1H2R4CA01#

2.5pF ±0.05pF GRM1553C1H2R5WA01#

±0.1pF GRM1553C1H2R5BA01#

±0.25pF GRM1553C1H2R5CA01#

2.6pF ±0.05pF GRM1553C1H2R6WA01#

±0.1pF GRM1553C1H2R6BA01#

±0.25pF GRM1553C1H2R6CA01#

2.7pF ±0.05pF GRM1553C1H2R7WA01#

±0.1pF GRM1553C1H2R7BA01#

±0.25pF GRM1553C1H2R7CA01#

2.8pF ±0.05pF GRM1553C1H2R8WA01#

±0.1pF GRM1553C1H2R8BA01#

±0.25pF GRM1553C1H2R8CA01#

2.9pF ±0.05pF GRM1553C1H2R9WA01#

±0.1pF GRM1553C1H2R9BA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CJ 2.9pF ±0.25pF GRM1553C1H2R9CA01#

3.0pF ±0.05pF GRM1553C1H3R0WA01#

±0.1pF GRM1553C1H3R0BA01#

±0.25pF GRM1553C1H3R0CA01#

3.1pF ±0.05pF GRM1553C1H3R1WA01#

±0.1pF GRM1553C1H3R1BA01#

±0.25pF GRM1553C1H3R1CA01#

3.2pF ±0.05pF GRM1553C1H3R2WA01#

±0.1pF GRM1553C1H3R2BA01#

±0.25pF GRM1553C1H3R2CA01#

3.3pF ±0.05pF GRM1553C1H3R3WA01#

±0.1pF GRM1553C1H3R3BA01#

±0.25pF GRM1553C1H3R3CA01#

3.4pF ±0.05pF GRM1553C1H3R4WA01#

±0.1pF GRM1553C1H3R4BA01#

±0.25pF GRM1553C1H3R4CA01#

3.5pF ±0.05pF GRM1553C1H3R5WA01#

±0.1pF GRM1553C1H3R5BA01#

±0.25pF GRM1553C1H3R5CA01#

3.6pF ±0.05pF GRM1553C1H3R6WA01#

±0.1pF GRM1553C1H3R6BA01#

±0.25pF GRM1553C1H3R6CA01#

3.7pF ±0.05pF GRM1553C1H3R7WA01#

±0.1pF GRM1553C1H3R7BA01#

±0.25pF GRM1553C1H3R7CA01#

3.8pF ±0.05pF GRM1553C1H3R8WA01#

±0.1pF GRM1553C1H3R8BA01#

±0.25pF GRM1553C1H3R8CA01#

3.9pF ±0.05pF GRM1553C1H3R9WA01#

±0.1pF GRM1553C1H3R9BA01#

±0.25pF GRM1553C1H3R9CA01#

CH 4.0pF ±0.05pF GRM1552C1H4R0WA01#

±0.1pF GRM1552C1H4R0BA01#

±0.25pF GRM1552C1H4R0CA01#

4.1pF ±0.05pF GRM1552C1H4R1WA01#

±0.1pF GRM1552C1H4R1BA01#

±0.25pF GRM1552C1H4R1CA01#

4.2pF ±0.05pF GRM1552C1H4R2WA01#

±0.1pF GRM1552C1H4R2BA01#

±0.25pF GRM1552C1H4R2CA01#

4.3pF ±0.05pF GRM1552C1H4R3WA01#

±0.1pF GRM1552C1H4R3BA01#

±0.25pF GRM1552C1H4R3CA01#

4.4pF ±0.05pF GRM1552C1H4R4WA01#

±0.1pF GRM1552C1H4R4BA01#

±0.25pF GRM1552C1H4R4CA01#

4.5pF ±0.05pF GRM1552C1H4R5WA01#

±0.1pF GRM1552C1H4R5BA01#

±0.25pF GRM1552C1H4R5CA01#

4.6pF ±0.05pF GRM1552C1H4R6WA01#

±0.1pF GRM1552C1H4R6BA01#

±0.25pF GRM1552C1H4R6CA01#

4.7pF ±0.05pF GRM1552C1H4R7WA01#

±0.1pF GRM1552C1H4R7BA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 4.7pF ±0.25pF GRM1552C1H4R7CA01#

4.8pF ±0.05pF GRM1552C1H4R8WA01#

±0.1pF GRM1552C1H4R8BA01#

±0.25pF GRM1552C1H4R8CA01#

4.9pF ±0.05pF GRM1552C1H4R9WA01#

±0.1pF GRM1552C1H4R9BA01#

±0.25pF GRM1552C1H4R9CA01#

5.0pF ±0.05pF GRM1552C1H5R0WA01#

±0.1pF GRM1552C1H5R0BA01#

±0.25pF GRM1552C1H5R0CA01#

5.1pF ±0.05pF GRM1552C1H5R1WA01#

±0.1pF GRM1552C1H5R1BA01#

±0.25pF GRM1552C1H5R1CA01#

±0.5pF GRM1552C1H5R1DA01#

5.2pF ±0.05pF GRM1552C1H5R2WA01#

±0.1pF GRM1552C1H5R2BA01#

±0.25pF GRM1552C1H5R2CA01#

±0.5pF GRM1552C1H5R2DA01#

5.3pF ±0.05pF GRM1552C1H5R3WA01#

±0.1pF GRM1552C1H5R3BA01#

±0.25pF GRM1552C1H5R3CA01#

±0.5pF GRM1552C1H5R3DA01#

5.4pF ±0.05pF GRM1552C1H5R4WA01#

±0.1pF GRM1552C1H5R4BA01#

±0.25pF GRM1552C1H5R4CA01#

±0.5pF GRM1552C1H5R4DA01#

5.5pF ±0.05pF GRM1552C1H5R5WA01#

±0.1pF GRM1552C1H5R5BA01#

±0.25pF GRM1552C1H5R5CA01#

±0.5pF GRM1552C1H5R5DA01#

5.6pF ±0.05pF GRM1552C1H5R6WA01#

±0.1pF GRM1552C1H5R6BA01#

±0.25pF GRM1552C1H5R6CA01#

±0.5pF GRM1552C1H5R6DA01#

5.7pF ±0.05pF GRM1552C1H5R7WA01#

±0.1pF GRM1552C1H5R7BA01#

±0.25pF GRM1552C1H5R7CA01#

±0.5pF GRM1552C1H5R7DA01#

5.8pF ±0.05pF GRM1552C1H5R8WA01#

±0.1pF GRM1552C1H5R8BA01#

±0.25pF GRM1552C1H5R8CA01#

±0.5pF GRM1552C1H5R8DA01#

5.9pF ±0.05pF GRM1552C1H5R9WA01#

±0.1pF GRM1552C1H5R9BA01#

±0.25pF GRM1552C1H5R9CA01#

±0.5pF GRM1552C1H5R9DA01#

6.0pF ±0.05pF GRM1552C1H6R0WA01#

±0.1pF GRM1552C1H6R0BA01#

±0.25pF GRM1552C1H6R0CA01#

±0.5pF GRM1552C1H6R0DA01#

6.1pF ±0.05pF GRM1552C1H6R1WA01#

±0.1pF GRM1552C1H6R1BA01#

±0.25pF GRM1552C1H6R1CA01#

±0.5pF GRM1552C1H6R1DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 6.2pF ±0.05pF GRM1552C1H6R2WA01#

±0.1pF GRM1552C1H6R2BA01#

±0.25pF GRM1552C1H6R2CA01#

±0.5pF GRM1552C1H6R2DA01#

6.3pF ±0.05pF GRM1552C1H6R3WA01#

±0.1pF GRM1552C1H6R3BA01#

±0.25pF GRM1552C1H6R3CA01#

±0.5pF GRM1552C1H6R3DA01#

6.4pF ±0.05pF GRM1552C1H6R4WA01#

±0.1pF GRM1552C1H6R4BA01#

±0.25pF GRM1552C1H6R4CA01#

±0.5pF GRM1552C1H6R4DA01#

6.5pF ±0.05pF GRM1552C1H6R5WA01#

±0.1pF GRM1552C1H6R5BA01#

±0.25pF GRM1552C1H6R5CA01#

±0.5pF GRM1552C1H6R5DA01#

6.6pF ±0.05pF GRM1552C1H6R6WA01#

±0.1pF GRM1552C1H6R6BA01#

±0.25pF GRM1552C1H6R6CA01#

±0.5pF GRM1552C1H6R6DA01#

6.7pF ±0.05pF GRM1552C1H6R7WA01#

±0.1pF GRM1552C1H6R7BA01#

±0.25pF GRM1552C1H6R7CA01#

±0.5pF GRM1552C1H6R7DA01#

6.8pF ±0.05pF GRM1552C1H6R8WA01#

±0.1pF GRM1552C1H6R8BA01#

±0.25pF GRM1552C1H6R8CA01#

±0.5pF GRM1552C1H6R8DA01#

6.9pF ±0.05pF GRM1552C1H6R9WA01#

±0.1pF GRM1552C1H6R9BA01#

±0.25pF GRM1552C1H6R9CA01#

±0.5pF GRM1552C1H6R9DA01#

7.0pF ±0.05pF GRM1552C1H7R0WA01#

±0.1pF GRM1552C1H7R0BA01#

±0.25pF GRM1552C1H7R0CA01#

±0.5pF GRM1552C1H7R0DA01#

7.1pF ±0.05pF GRM1552C1H7R1WA01#

±0.1pF GRM1552C1H7R1BA01#

±0.25pF GRM1552C1H7R1CA01#

±0.5pF GRM1552C1H7R1DA01#

7.2pF ±0.05pF GRM1552C1H7R2WA01#

±0.1pF GRM1552C1H7R2BA01#

±0.25pF GRM1552C1H7R2CA01#

±0.5pF GRM1552C1H7R2DA01#

7.3pF ±0.05pF GRM1552C1H7R3WA01#

±0.1pF GRM1552C1H7R3BA01#

±0.25pF GRM1552C1H7R3CA01#

±0.5pF GRM1552C1H7R3DA01#

7.4pF ±0.05pF GRM1552C1H7R4WA01#

±0.1pF GRM1552C1H7R4BA01#

±0.25pF GRM1552C1H7R4CA01#

±0.5pF GRM1552C1H7R4DA01#

7.5pF ±0.05pF GRM1552C1H7R5WA01#

±0.1pF GRM1552C1H7R5BA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 7.5pF ±0.25pF GRM1552C1H7R5CA01#

±0.5pF GRM1552C1H7R5DA01#

7.6pF ±0.05pF GRM1552C1H7R6WA01#

±0.1pF GRM1552C1H7R6BA01#

±0.25pF GRM1552C1H7R6CA01#

±0.5pF GRM1552C1H7R6DA01#

7.7pF ±0.05pF GRM1552C1H7R7WA01#

±0.1pF GRM1552C1H7R7BA01#

±0.25pF GRM1552C1H7R7CA01#

±0.5pF GRM1552C1H7R7DA01#

7.8pF ±0.05pF GRM1552C1H7R8WA01#

±0.1pF GRM1552C1H7R8BA01#

±0.25pF GRM1552C1H7R8CA01#

±0.5pF GRM1552C1H7R8DA01#

7.9pF ±0.05pF GRM1552C1H7R9WA01#

±0.1pF GRM1552C1H7R9BA01#

±0.25pF GRM1552C1H7R9CA01#

±0.5pF GRM1552C1H7R9DA01#

8.0pF ±0.05pF GRM1552C1H8R0WA01#

±0.1pF GRM1552C1H8R0BA01#

±0.25pF GRM1552C1H8R0CA01#

±0.5pF GRM1552C1H8R0DA01#

8.1pF ±0.05pF GRM1552C1H8R1WA01#

±0.1pF GRM1552C1H8R1BA01#

±0.25pF GRM1552C1H8R1CA01#

±0.5pF GRM1552C1H8R1DA01#

8.2pF ±0.05pF GRM1552C1H8R2WA01#

±0.1pF GRM1552C1H8R2BA01#

±0.25pF GRM1552C1H8R2CA01#

±0.5pF GRM1552C1H8R2DA01#

8.3pF ±0.05pF GRM1552C1H8R3WA01#

±0.1pF GRM1552C1H8R3BA01#

±0.25pF GRM1552C1H8R3CA01#

±0.5pF GRM1552C1H8R3DA01#

8.4pF ±0.05pF GRM1552C1H8R4WA01#

±0.1pF GRM1552C1H8R4BA01#

±0.25pF GRM1552C1H8R4CA01#

±0.5pF GRM1552C1H8R4DA01#

8.5pF ±0.05pF GRM1552C1H8R5WA01#

±0.1pF GRM1552C1H8R5BA01#

±0.25pF GRM1552C1H8R5CA01#

±0.5pF GRM1552C1H8R5DA01#

8.6pF ±0.05pF GRM1552C1H8R6WA01#

±0.1pF GRM1552C1H8R6BA01#

±0.25pF GRM1552C1H8R6CA01#

±0.5pF GRM1552C1H8R6DA01#

8.7pF ±0.05pF GRM1552C1H8R7WA01#

±0.1pF GRM1552C1H8R7BA01#

±0.25pF GRM1552C1H8R7CA01#

±0.5pF GRM1552C1H8R7DA01#

8.8pF ±0.05pF GRM1552C1H8R8WA01#

±0.1pF GRM1552C1H8R8BA01#

±0.25pF GRM1552C1H8R8CA01#

±0.5pF GRM1552C1H8R8DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 8.9pF ±0.05pF GRM1552C1H8R9WA01#

±0.1pF GRM1552C1H8R9BA01#

±0.25pF GRM1552C1H8R9CA01#

±0.5pF GRM1552C1H8R9DA01#

9.0pF ±0.05pF GRM1552C1H9R0WA01#

±0.1pF GRM1552C1H9R0BA01#

±0.25pF GRM1552C1H9R0CA01#

±0.5pF GRM1552C1H9R0DA01#

9.1pF ±0.05pF GRM1552C1H9R1WA01#

±0.1pF GRM1552C1H9R1BA01#

±0.25pF GRM1552C1H9R1CA01#

±0.5pF GRM1552C1H9R1DA01#

9.2pF ±0.05pF GRM1552C1H9R2WA01#

±0.1pF GRM1552C1H9R2BA01#

±0.25pF GRM1552C1H9R2CA01#

±0.5pF GRM1552C1H9R2DA01#

9.3pF ±0.05pF GRM1552C1H9R3WA01#

±0.1pF GRM1552C1H9R3BA01#

±0.25pF GRM1552C1H9R3CA01#

±0.5pF GRM1552C1H9R3DA01#

9.4pF ±0.05pF GRM1552C1H9R4WA01#

±0.1pF GRM1552C1H9R4BA01#

±0.25pF GRM1552C1H9R4CA01#

±0.5pF GRM1552C1H9R4DA01#

9.5pF ±0.05pF GRM1552C1H9R5WA01#

±0.1pF GRM1552C1H9R5BA01#

±0.25pF GRM1552C1H9R5CA01#

±0.5pF GRM1552C1H9R5DA01#

9.6pF ±0.05pF GRM1552C1H9R6WA01#

±0.1pF GRM1552C1H9R6BA01#

±0.25pF GRM1552C1H9R6CA01#

±0.5pF GRM1552C1H9R6DA01#

9.7pF ±0.05pF GRM1552C1H9R7WA01#

±0.1pF GRM1552C1H9R7BA01#

±0.25pF GRM1552C1H9R7CA01#

±0.5pF GRM1552C1H9R7DA01#

9.8pF ±0.05pF GRM1552C1H9R8WA01#

±0.1pF GRM1552C1H9R8BA01#

±0.25pF GRM1552C1H9R8CA01#

±0.5pF GRM1552C1H9R8DA01#

9.9pF ±0.05pF GRM1552C1H9R9WA01#

±0.1pF GRM1552C1H9R9BA01#

±0.25pF GRM1552C1H9R9CA01#

±0.5pF GRM1552C1H9R9DA01#

10pF ±2% GRM1552C1H100GA01#

±5% GRM1552C1H100JA01#

12pF ±2% GRM1552C1H120GA01#

±5% GRM1552C1H120JA01#

15pF ±2% GRM1552C1H150GA01#

±5% GRM1552C1H150JA01#

18pF ±2% GRM1552C1H180GA01#

±5% GRM1552C1H180JA01#

22pF ±2% GRM1552C1H220GA01#

±5% GRM1552C1H220JA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 27pF ±2% GRM1552C1H270GA01#

±5% GRM1552C1H270JA01#

33pF ±2% GRM1552C1H330GA01#

±5% GRM1552C1H330JA01#

39pF ±2% GRM1552C1H390GA01#

±5% GRM1552C1H390JA01#

47pF ±2% GRM1552C1H470GA01#

±5% GRM1552C1H470JA01#

56pF ±2% GRM1552C1H560GA01#

±5% GRM1552C1H560JA01#

68pF ±2% GRM1552C1H680GA01#

±5% GRM1552C1H680JA01#

82pF ±2% GRM1552C1H820GA01#

±5% GRM1552C1H820JA01#

100pF ±2% GRM1552C1H101GA01#

±5% GRM1552C1H101JA01#

120pF ±2% GRM1552C1H121GA01#

±5% GRM1552C1H121JA01#

150pF ±2% GRM1552C1H151GA01#

±5% GRM1552C1H151JA01#

180pF ±2% GRM1552C1H181GA01#

±5% GRM1552C1H181JA01#

220pF ±2% GRM1552C1H221GA01#

±5% GRM1552C1H221JA01#

270pF ±2% GRM1552C1H271GA01#

±5% GRM1552C1H271JA01#

330pF ±2% GRM1552C1H331GA01#

±5% GRM1552C1H331JA01#

390pF ±2% GRM1552C1H391GA01#

±5% GRM1552C1H391JA01#

470pF ±2% GRM1552C1H471GA01#

±5% GRM1552C1H471JA01#

560pF ±2% GRM1552C1H561GA01#

±5% GRM1552C1H561JA01#

680pF ±2% GRM1552C1H681GA01#

±5% GRM1552C1H681JA01#

820pF ±2% GRM1552C1H821GA01#

±5% GRM1552C1H821JA01#

1000pF ±2% GRM1552C1H102GA01#

±5% GRM1552C1H102JA01#

P2H 1.0pF ±0.25pF GRM1556P1H1R0CZ01#

2.0pF ±0.25pF GRM1556P1H2R0CZ01#

3.0pF ±0.25pF GRM1556P1H3R0CZ01#

4.0pF ±0.25pF GRM1556P1H4R0CZ01#

5.0pF ±0.25pF GRM1556P1H5R0CZ01#

6.0pF ±0.5pF GRM1556P1H6R0DZ01#

7.0pF ±0.5pF GRM1556P1H7R0DZ01#

8.0pF ±0.5pF GRM1556P1H8R0DZ01#

9.0pF ±0.5pF GRM1556P1H9R0DZ01#

10pF ±5% GRM1556P1H100JZ01#

12pF ±5% GRM1556P1H120JZ01#

15pF ±5% GRM1556P1H150JZ01#

18pF ±5% GRM1556P1H180JZ01#

22pF ±5% GRM1556P1H220JZ01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc P2H 27pF ±5% GRM1556P1H270JZ01#

PK 1.0pF ±0.25pF GRM1554P1H1R0CZ01#

2.0pF ±0.25pF GRM1554P1H2R0CZ01#

PJ 3.0pF ±0.25pF GRM1553P1H3R0CZ01#

PH 4.0pF ±0.25pF GRM1552P1H4R0CZ01#

5.0pF ±0.25pF GRM1552P1H5R0CZ01#

6.0pF ±0.5pF GRM1552P1H6R0DZ01#

7.0pF ±0.5pF GRM1552P1H7R0DZ01#

8.0pF ±0.5pF GRM1552P1H8R0DZ01#

9.0pF ±0.5pF GRM1552P1H9R0DZ01#

10pF ±5% GRM1552P1H100JZ01#

12pF ±5% GRM1552P1H120JZ01#

15pF ±5% GRM1552P1H150JZ01#

18pF ±5% GRM1552P1H180JZ01#

22pF ±5% GRM1552P1H220JZ01#

27pF ±5% GRM1552P1H270JZ01#

R2H 1.0pF ±0.25pF GRM1556R1H1R0CD01#

2.0pF ±0.25pF GRM1556R1H2R0CZ01#

3.0pF ±0.25pF GRM1556R1H3R0CZ01#

4.0pF ±0.25pF GRM1556R1H4R0CZ01#

5.0pF ±0.25pF GRM1556R1H5R0CZ01#

6.0pF ±0.5pF GRM1556R1H6R0DZ01#

7.0pF ±0.5pF GRM1556R1H7R0DZ01#

8.0pF ±0.5pF GRM1556R1H8R0DZ01#

9.0pF ±0.5pF GRM1556R1H9R0DZ01#

10pF ±5% GRM1556R1H100JZ01#

12pF ±5% GRM1556R1H120JZ01#

15pF ±5% GRM1556R1H150JZ01#

18pF ±5% GRM1556R1H180JZ01#

22pF ±5% GRM1556R1H220JZ01#

27pF ±5% GRM1556R1H270JZ01#

33pF ±5% GRM1556R1H330JZ01#

RK 1.0pF ±0.25pF GRM1554R1H1R0CD01#

2.0pF ±0.25pF GRM1554R1H2R0CZ01#

RJ 3.0pF ±0.25pF GRM1553R1H3R0CZ01#

RH 4.0pF ±0.25pF GRM1552R1H4R0CZ01#

5.0pF ±0.25pF GRM1552R1H5R0CZ01#

6.0pF ±0.5pF GRM1552R1H6R0DZ01#

7.0pF ±0.5pF GRM1552R1H7R0DZ01#

8.0pF ±0.5pF GRM1552R1H8R0DZ01#

9.0pF ±0.5pF GRM1552R1H9R0DZ01#

10pF ±5% GRM1552R1H100JZ01#

12pF ±5% GRM1552R1H120JZ01#

15pF ±5% GRM1552R1H150JZ01#

18pF ±5% GRM1552R1H180JZ01#

22pF ±5% GRM1552R1H220JZ01#

27pF ±5% GRM1552R1H270JZ01#

33pF ±5% GRM1552R1H330JZ01#

S2H 1.0pF ±0.25pF GRM1556S1H1R0CD01#

2.0pF ±0.25pF GRM1556S1H2R0CZ01#

3.0pF ±0.25pF GRM1556S1H3R0CZ01#

4.0pF ±0.25pF GRM1556S1H4R0CZ01#

5.0pF ±0.25pF GRM1556S1H5R0CZ01#

6.0pF ±0.5pF GRM1556S1H6R0DZ01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc S2H 7.0pF ±0.5pF GRM1556S1H7R0DZ01#

8.0pF ±0.5pF GRM1556S1H8R0DZ01#

9.0pF ±0.5pF GRM1556S1H9R0DZ01#

10pF ±5% GRM1556S1H100JZ01#

12pF ±5% GRM1556S1H120JZ01#

15pF ±5% GRM1556S1H150JZ01#

18pF ±5% GRM1556S1H180JZ01#

22pF ±5% GRM1556S1H220JZ01#

27pF ±5% GRM1556S1H270JZ01#

33pF ±5% GRM1556S1H330JZ01#

39pF ±5% GRM1556S1H390JZ01#

SK 1.0pF ±0.25pF GRM1554S1H1R0CD01#

2.0pF ±0.25pF GRM1554S1H2R0CZ01#

SJ 3.0pF ±0.25pF GRM1553S1H3R0CZ01#

SH 4.0pF ±0.25pF GRM1552S1H4R0CZ01#

5.0pF ±0.25pF GRM1552S1H5R0CZ01#

6.0pF ±0.5pF GRM1552S1H6R0DZ01#

7.0pF ±0.5pF GRM1552S1H7R0DZ01#

8.0pF ±0.5pF GRM1552S1H8R0DZ01#

9.0pF ±0.5pF GRM1552S1H9R0DZ01#

10pF ±5% GRM1552S1H100JZ01#

12pF ±5% GRM1552S1H120JZ01#

15pF ±5% GRM1552S1H150JZ01#

18pF ±5% GRM1552S1H180JZ01#

22pF ±5% GRM1552S1H220JZ01#

27pF ±5% GRM1552S1H270JZ01#

33pF ±5% GRM1552S1H330JZ01#

39pF ±5% GRM1552S1H390JZ01#

T2H 1.0pF ±0.25pF GRM1556T1H1R0CD01#

2.0pF ±0.25pF GRM1556T1H2R0CD01#

3.0pF ±0.25pF GRM1556T1H3R0CD01#

4.0pF ±0.25pF GRM1556T1H4R0CD01#

5.0pF ±0.25pF GRM1556T1H5R0CD01#

6.0pF ±0.5pF GRM1556T1H6R0DD01#

7.0pF ±0.5pF GRM1556T1H7R0DD01#

8.0pF ±0.5pF GRM1556T1H8R0DD01#

9.0pF ±0.5pF GRM1556T1H9R0DD01#

10pF ±5% GRM1556T1H100JD01#

12pF ±5% GRM1556T1H120JD01#

15pF ±5% GRM1556T1H150JD01#

18pF ±5% GRM1556T1H180JD01#

22pF ±5% GRM1556T1H220JD01#

27pF ±5% GRM1556T1H270JD01#

33pF ±5% GRM1556T1H330JD01#

39pF ±5% GRM1556T1H390JD01#

47pF ±5% GRM1556T1H470JD01#

56pF ±5% GRM1556T1H560JD01#

68pF ±5% GRM1556T1H680JD01#

82pF ±5% GRM1556T1H820JD01#

100pF ±5% GRM1556T1H101JD01#

TK 1.0pF ±0.25pF GRM1554T1H1R0CD01#

2.0pF ±0.25pF GRM1554T1H2R0CD01#

TJ 3.0pF ±0.25pF GRM1553T1H3R0CD01#

TH 4.0pF ±0.25pF GRM1552T1H4R0CD01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc TH 5.0pF ±0.25pF GRM1552T1H5R0CD01#

6.0pF ±0.5pF GRM1552T1H6R0DD01#

7.0pF ±0.5pF GRM1552T1H7R0DD01#

8.0pF ±0.5pF GRM1552T1H8R0DD01#

9.0pF ±0.5pF GRM1552T1H9R0DD01#

10pF ±5% GRM1552T1H100JD01#

12pF ±5% GRM1552T1H120JD01#

15pF ±5% GRM1552T1H150JD01#

18pF ±5% GRM1552T1H180JD01#

22pF ±5% GRM1552T1H220JD01#

27pF ±5% GRM1552T1H270JD01#

33pF ±5% GRM1552T1H330JD01#

39pF ±5% GRM1552T1H390JD01#

47pF ±5% GRM1552T1H470JD01#

56pF ±5% GRM1552T1H560JD01#

68pF ±5% GRM1552T1H680JD01#

82pF ±5% GRM1552T1H820JD01#

100pF ±5% GRM1552T1H101JD01#

UK 1.0pF ±0.25pF GRM1554U1H1R0CZ01#

2.0pF ±0.25pF GRM1554U1H2R0CZ01#

UJ 3.0pF ±0.25pF GRM1553U1H3R0CZ01#

4.0pF ±0.25pF GRM1553U1H4R0CZ01#

5.0pF ±0.25pF GRM1553U1H5R0CZ01#

6.0pF ±0.5pF GRM1553U1H6R0DZ01#

7.0pF ±0.5pF GRM1553U1H7R0DZ01#

8.0pF ±0.5pF GRM1553U1H8R0DZ01#

9.0pF ±0.5pF GRM1553U1H9R0DZ01#

10pF ±5% GRM1553U1H100JZ01#

12pF ±5% GRM1553U1H120JZ01#

15pF ±5% GRM1553U1H150JZ01#

18pF ±5% GRM1553U1H180JZ01#

22pF ±5% GRM1553U1H220JZ01#

27pF ±5% GRM1553U1H270JZ01#

33pF ±5% GRM1553U1H330JZ01#

39pF ±5% GRM1553U1H390JZ01#

47pF ±5% GRM1553U1H470JZ01#

56pF ±5% GRM1553U1H560JZ01#

68pF ±5% GRM1553U1H680JZ01#

82pF ±5% GRM1553U1H820JZ01#

100pF ±5% GRM1553U1H101JZ01#

120pF ±5% GRM1553U1H121JZ01#

150pF ±5% GRM1553U1H151JZ01#

180pF ±5% GRM1553U1H181JZ01#

10Vdc SL 1200pF ±5% GRM1551X1A122JA01#

1500pF ±5% GRM1551X1A152JA01#

1800pF ±5% GRM1551X1A182JA01#

2200pF ±5% GRM1551X1A222JA01#

2700pF ±5% GRM1551X1A272JA01#

3300pF ±5% GRM1551X1A332JA01#

3900pF ±5% GRM1551X1A392JA01#

4700pF ±5% GRM1551X1A472JA01#

U2J 1200pF ±5% GRM1557U1A122JA01#

1500pF ±5% GRM1557U1A152JA01#

1800pF ±5% GRM1557U1A182JA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 10Vdc U2J 2200pF ±5% GRM1557U1A222JA01#

2700pF ±5% GRM1557U1A272JA01#

3300pF ±5% GRM1557U1A332JA01#

3900pF ±5% GRM1557U1A392JA01#

4700pF ±5% GRM1557U1A472JA01#

UJ 1200pF ±5% GRM1553U1A122JA01#

1500pF ±5% GRM1553U1A152JA01#

1800pF ±5% GRM1553U1A182JA01#

2200pF ±5% GRM1553U1A222JA01#

2700pF ±5% GRM1553U1A272JA01#

3300pF ±5% GRM1553U1A332JA01#

3900pF ±5% GRM1553U1A392JA01#

4700pF ±5% GRM1553U1A472JA01#

GRM Series Temperature Compensating Type Part Number List

c 1.6×0.8mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 50Vdc SL 2200pF ±5% GRM1851X1H222JA44#

2700pF ±5% GRM1851X1H272JA44#

3300pF ±5% GRM1851X1H332JA44#

3900pF ±5% GRM1851X1H392JA44#

4700pF ±5% GRM1851X1H472JA44#

U2J 2200pF ±5% GRM1857U1H222JA44#

2700pF ±5% GRM1857U1H272JA44#

3300pF ±5% GRM1857U1H332JA44#

3900pF ±5% GRM1857U1H392JA44#

4700pF ±5% GRM1857U1H472JA44#

UJ 2200pF ±5% GRM1853U1H222JA44#

2700pF ±5% GRM1853U1H272JA44#

3300pF ±5% GRM1853U1H332JA44#

3900pF ±5% GRM1853U1H392JA44#

4700pF ±5% GRM1853U1H472JA44#

10Vdc SL 5600pF ±5% GRM1851X1A562JA44#

6800pF ±5% GRM1851X1A682JA44#

8200pF ±5% GRM1851X1A822JA44#

10000pF ±5% GRM1851X1A103JA44#

U2J 5600pF ±5% GRM1857U1A562JA44#

6800pF ±5% GRM1857U1A682JA44#

8200pF ±5% GRM1857U1A822JA44#

10000pF ±5% GRM1857U1A103JA44#

UJ 5600pF ±5% GRM1853U1A562JA44#

6800pF ±5% GRM1853U1A682JA44#

8200pF ±5% GRM1853U1A822JA44#

10000pF ±5% GRM1853U1A103JA44#

0.9mm 100Vdc C0G 0.5pF ±0.05pF GRM1885C2AR50WA01#

±0.1pF GRM1885C2AR50BA01#

0.6pF ±0.05pF GRM1885C2AR60WA01#

±0.1pF GRM1885C2AR60BA01#

0.7pF ±0.05pF GRM1885C2AR70WA01#

±0.1pF GRM1885C2AR70BA01#

0.8pF ±0.05pF GRM1885C2AR80WA01#

±0.1pF GRM1885C2AR80BA01#

0.9pF ±0.05pF GRM1885C2AR90WA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 0.9pF ±0.1pF GRM1885C2AR90BA01#

1.0pF ±0.05pF GRM1885C2A1R0WA01#

±0.1pF GRM1885C2A1R0BA01#

±0.25pF GRM1885C2A1R0CA01#

1.1pF ±0.05pF GRM1885C2A1R1WA01#

±0.1pF GRM1885C2A1R1BA01#

±0.25pF GRM1885C2A1R1CA01#

1.2pF ±0.05pF GRM1885C2A1R2WA01#

±0.1pF GRM1885C2A1R2BA01#

±0.25pF GRM1885C2A1R2CA01#

1.3pF ±0.05pF GRM1885C2A1R3WA01#

±0.1pF GRM1885C2A1R3BA01#

±0.25pF GRM1885C2A1R3CA01#

1.4pF ±0.05pF GRM1885C2A1R4WA01#

±0.1pF GRM1885C2A1R4BA01#

±0.25pF GRM1885C2A1R4CA01#

1.5pF ±0.05pF GRM1885C2A1R5WA01#

±0.1pF GRM1885C2A1R5BA01#

±0.25pF GRM1885C2A1R5CA01#

1.6pF ±0.05pF GRM1885C2A1R6WA01#

±0.1pF GRM1885C2A1R6BA01#

±0.25pF GRM1885C2A1R6CA01#

1.7pF ±0.05pF GRM1885C2A1R7WA01#

±0.1pF GRM1885C2A1R7BA01#

±0.25pF GRM1885C2A1R7CA01#

1.8pF ±0.05pF GRM1885C2A1R8WA01#

±0.1pF GRM1885C2A1R8BA01#

±0.25pF GRM1885C2A1R8CA01#

1.9pF ±0.05pF GRM1885C2A1R9WA01#

±0.1pF GRM1885C2A1R9BA01#

±0.25pF GRM1885C2A1R9CA01#

2.0pF ±0.05pF GRM1885C2A2R0WA01#

±0.1pF GRM1885C2A2R0BA01#

±0.25pF GRM1885C2A2R0CA01#

2.1pF ±0.05pF GRM1885C2A2R1WA01#

±0.1pF GRM1885C2A2R1BA01#

±0.25pF GRM1885C2A2R1CA01#

2.2pF ±0.05pF GRM1885C2A2R2WA01#

±0.1pF GRM1885C2A2R2BA01#

±0.25pF GRM1885C2A2R2CA01#

2.3pF ±0.05pF GRM1885C2A2R3WA01#

±0.1pF GRM1885C2A2R3BA01#

±0.25pF GRM1885C2A2R3CA01#

2.4pF ±0.05pF GRM1885C2A2R4WA01#

±0.1pF GRM1885C2A2R4BA01#

±0.25pF GRM1885C2A2R4CA01#

2.5pF ±0.05pF GRM1885C2A2R5WA01#

±0.1pF GRM1885C2A2R5BA01#

±0.25pF GRM1885C2A2R5CA01#

2.6pF ±0.05pF GRM1885C2A2R6WA01#

±0.1pF GRM1885C2A2R6BA01#

±0.25pF GRM1885C2A2R6CA01#

2.7pF ±0.05pF GRM1885C2A2R7WA01#

±0.1pF GRM1885C2A2R7BA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 2.7pF ±0.25pF GRM1885C2A2R7CA01#

2.8pF ±0.05pF GRM1885C2A2R8WA01#

±0.1pF GRM1885C2A2R8BA01#

±0.25pF GRM1885C2A2R8CA01#

2.9pF ±0.05pF GRM1885C2A2R9WA01#

±0.1pF GRM1885C2A2R9BA01#

±0.25pF GRM1885C2A2R9CA01#

3.0pF ±0.05pF GRM1885C2A3R0WA01#

±0.1pF GRM1885C2A3R0BA01#

±0.25pF GRM1885C2A3R0CA01#

3.1pF ±0.05pF GRM1885C2A3R1WA01#

±0.1pF GRM1885C2A3R1BA01#

±0.25pF GRM1885C2A3R1CA01#

3.2pF ±0.05pF GRM1885C2A3R2WA01#

±0.1pF GRM1885C2A3R2BA01#

±0.25pF GRM1885C2A3R2CA01#

3.3pF ±0.05pF GRM1885C2A3R3WA01#

±0.1pF GRM1885C2A3R3BA01#

±0.25pF GRM1885C2A3R3CA01#

3.4pF ±0.05pF GRM1885C2A3R4WA01#

±0.1pF GRM1885C2A3R4BA01#

±0.25pF GRM1885C2A3R4CA01#

3.5pF ±0.05pF GRM1885C2A3R5WA01#

±0.1pF GRM1885C2A3R5BA01#

±0.25pF GRM1885C2A3R5CA01#

3.6pF ±0.05pF GRM1885C2A3R6WA01#

±0.1pF GRM1885C2A3R6BA01#

±0.25pF GRM1885C2A3R6CA01#

3.7pF ±0.05pF GRM1885C2A3R7WA01#

±0.1pF GRM1885C2A3R7BA01#

±0.25pF GRM1885C2A3R7CA01#

3.8pF ±0.05pF GRM1885C2A3R8WA01#

±0.1pF GRM1885C2A3R8BA01#

±0.25pF GRM1885C2A3R8CA01#

3.9pF ±0.05pF GRM1885C2A3R9WA01#

±0.1pF GRM1885C2A3R9BA01#

±0.25pF GRM1885C2A3R9CA01#

4.0pF ±0.05pF GRM1885C2A4R0WA01#

±0.1pF GRM1885C2A4R0BA01#

±0.25pF GRM1885C2A4R0CA01#

4.1pF ±0.05pF GRM1885C2A4R1WA01#

±0.1pF GRM1885C2A4R1BA01#

±0.25pF GRM1885C2A4R1CA01#

4.2pF ±0.05pF GRM1885C2A4R2WA01#

±0.1pF GRM1885C2A4R2BA01#

±0.25pF GRM1885C2A4R2CA01#

4.3pF ±0.05pF GRM1885C2A4R3WA01#

±0.1pF GRM1885C2A4R3BA01#

±0.25pF GRM1885C2A4R3CA01#

4.4pF ±0.05pF GRM1885C2A4R4WA01#

±0.1pF GRM1885C2A4R4BA01#

±0.25pF GRM1885C2A4R4CA01#

4.5pF ±0.05pF GRM1885C2A4R5WA01#

±0.1pF GRM1885C2A4R5BA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 4.5pF ±0.25pF GRM1885C2A4R5CA01#

4.6pF ±0.05pF GRM1885C2A4R6WA01#

±0.1pF GRM1885C2A4R6BA01#

±0.25pF GRM1885C2A4R6CA01#

4.7pF ±0.05pF GRM1885C2A4R7WA01#

±0.1pF GRM1885C2A4R7BA01#

±0.25pF GRM1885C2A4R7CA01#

4.8pF ±0.05pF GRM1885C2A4R8WA01#

±0.1pF GRM1885C2A4R8BA01#

±0.25pF GRM1885C2A4R8CA01#

4.9pF ±0.05pF GRM1885C2A4R9WA01#

±0.1pF GRM1885C2A4R9BA01#

±0.25pF GRM1885C2A4R9CA01#

5.0pF ±0.05pF GRM1885C2A5R0WA01#

±0.1pF GRM1885C2A5R0BA01#

±0.25pF GRM1885C2A5R0CA01#

5.1pF ±0.05pF GRM1885C2A5R1WA01#

±0.1pF GRM1885C2A5R1BA01#

±0.25pF GRM1885C2A5R1CA01#

±0.5pF GRM1885C2A5R1DA01#

5.2pF ±0.05pF GRM1885C2A5R2WA01#

±0.1pF GRM1885C2A5R2BA01#

±0.25pF GRM1885C2A5R2CA01#

±0.5pF GRM1885C2A5R2DA01#

5.3pF ±0.05pF GRM1885C2A5R3WA01#

±0.1pF GRM1885C2A5R3BA01#

±0.25pF GRM1885C2A5R3CA01#

±0.5pF GRM1885C2A5R3DA01#

5.4pF ±0.05pF GRM1885C2A5R4WA01#

±0.1pF GRM1885C2A5R4BA01#

±0.25pF GRM1885C2A5R4CA01#

±0.5pF GRM1885C2A5R4DA01#

5.5pF ±0.05pF GRM1885C2A5R5WA01#

±0.1pF GRM1885C2A5R5BA01#

±0.25pF GRM1885C2A5R5CA01#

±0.5pF GRM1885C2A5R5DA01#

5.6pF ±0.05pF GRM1885C2A5R6WA01#

±0.1pF GRM1885C2A5R6BA01#

±0.25pF GRM1885C2A5R6CA01#

±0.5pF GRM1885C2A5R6DA01#

5.7pF ±0.05pF GRM1885C2A5R7WA01#

±0.1pF GRM1885C2A5R7BA01#

±0.25pF GRM1885C2A5R7CA01#

±0.5pF GRM1885C2A5R7DA01#

5.8pF ±0.05pF GRM1885C2A5R8WA01#

±0.1pF GRM1885C2A5R8BA01#

±0.25pF GRM1885C2A5R8CA01#

±0.5pF GRM1885C2A5R8DA01#

5.9pF ±0.05pF GRM1885C2A5R9WA01#

±0.1pF GRM1885C2A5R9BA01#

±0.25pF GRM1885C2A5R9CA01#

±0.5pF GRM1885C2A5R9DA01#

6.0pF ±0.05pF GRM1885C2A6R0WA01#

±0.1pF GRM1885C2A6R0BA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 6.0pF ±0.25pF GRM1885C2A6R0CA01#

±0.5pF GRM1885C2A6R0DA01#

6.1pF ±0.05pF GRM1885C2A6R1WA01#

±0.1pF GRM1885C2A6R1BA01#

±0.25pF GRM1885C2A6R1CA01#

±0.5pF GRM1885C2A6R1DA01#

6.2pF ±0.05pF GRM1885C2A6R2WA01#

±0.1pF GRM1885C2A6R2BA01#

±0.25pF GRM1885C2A6R2CA01#

±0.5pF GRM1885C2A6R2DA01#

6.3pF ±0.05pF GRM1885C2A6R3WA01#

±0.1pF GRM1885C2A6R3BA01#

±0.25pF GRM1885C2A6R3CA01#

±0.5pF GRM1885C2A6R3DA01#

6.4pF ±0.05pF GRM1885C2A6R4WA01#

±0.1pF GRM1885C2A6R4BA01#

±0.25pF GRM1885C2A6R4CA01#

±0.5pF GRM1885C2A6R4DA01#

6.5pF ±0.05pF GRM1885C2A6R5WA01#

±0.1pF GRM1885C2A6R5BA01#

±0.25pF GRM1885C2A6R5CA01#

±0.5pF GRM1885C2A6R5DA01#

6.6pF ±0.05pF GRM1885C2A6R6WA01#

±0.1pF GRM1885C2A6R6BA01#

±0.25pF GRM1885C2A6R6CA01#

±0.5pF GRM1885C2A6R6DA01#

6.7pF ±0.05pF GRM1885C2A6R7WA01#

±0.1pF GRM1885C2A6R7BA01#

±0.25pF GRM1885C2A6R7CA01#

±0.5pF GRM1885C2A6R7DA01#

6.8pF ±0.05pF GRM1885C2A6R8WA01#

±0.1pF GRM1885C2A6R8BA01#

±0.25pF GRM1885C2A6R8CA01#

±0.5pF GRM1885C2A6R8DA01#

6.9pF ±0.05pF GRM1885C2A6R9WA01#

±0.1pF GRM1885C2A6R9BA01#

±0.25pF GRM1885C2A6R9CA01#

±0.5pF GRM1885C2A6R9DA01#

7.0pF ±0.05pF GRM1885C2A7R0WA01#

±0.1pF GRM1885C2A7R0BA01#

±0.25pF GRM1885C2A7R0CA01#

±0.5pF GRM1885C2A7R0DA01#

7.1pF ±0.05pF GRM1885C2A7R1WA01#

±0.1pF GRM1885C2A7R1BA01#

±0.25pF GRM1885C2A7R1CA01#

±0.5pF GRM1885C2A7R1DA01#

7.2pF ±0.05pF GRM1885C2A7R2WA01#

±0.1pF GRM1885C2A7R2BA01#

±0.25pF GRM1885C2A7R2CA01#

±0.5pF GRM1885C2A7R2DA01#

7.3pF ±0.05pF GRM1885C2A7R3WA01#

±0.1pF GRM1885C2A7R3BA01#

±0.25pF GRM1885C2A7R3CA01#

±0.5pF GRM1885C2A7R3DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 7.4pF ±0.05pF GRM1885C2A7R4WA01#

±0.1pF GRM1885C2A7R4BA01#

±0.25pF GRM1885C2A7R4CA01#

±0.5pF GRM1885C2A7R4DA01#

7.5pF ±0.05pF GRM1885C2A7R5WA01#

±0.1pF GRM1885C2A7R5BA01#

±0.25pF GRM1885C2A7R5CA01#

±0.5pF GRM1885C2A7R5DA01#

7.6pF ±0.05pF GRM1885C2A7R6WA01#

±0.1pF GRM1885C2A7R6BA01#

±0.25pF GRM1885C2A7R6CA01#

±0.5pF GRM1885C2A7R6DA01#

7.7pF ±0.05pF GRM1885C2A7R7WA01#

±0.1pF GRM1885C2A7R7BA01#

±0.25pF GRM1885C2A7R7CA01#

±0.5pF GRM1885C2A7R7DA01#

7.8pF ±0.05pF GRM1885C2A7R8WA01#

±0.1pF GRM1885C2A7R8BA01#

±0.25pF GRM1885C2A7R8CA01#

±0.5pF GRM1885C2A7R8DA01#

7.9pF ±0.05pF GRM1885C2A7R9WA01#

±0.1pF GRM1885C2A7R9BA01#

±0.25pF GRM1885C2A7R9CA01#

±0.5pF GRM1885C2A7R9DA01#

8.0pF ±0.05pF GRM1885C2A8R0WA01#

±0.1pF GRM1885C2A8R0BA01#

±0.25pF GRM1885C2A8R0CA01#

±0.5pF GRM1885C2A8R0DA01#

8.1pF ±0.05pF GRM1885C2A8R1WA01#

±0.1pF GRM1885C2A8R1BA01#

±0.25pF GRM1885C2A8R1CA01#

±0.5pF GRM1885C2A8R1DA01#

8.2pF ±0.05pF GRM1885C2A8R2WA01#

±0.1pF GRM1885C2A8R2BA01#

±0.25pF GRM1885C2A8R2CA01#

±0.5pF GRM1885C2A8R2DA01#

8.3pF ±0.05pF GRM1885C2A8R3WA01#

±0.1pF GRM1885C2A8R3BA01#

±0.25pF GRM1885C2A8R3CA01#

±0.5pF GRM1885C2A8R3DA01#

8.4pF ±0.05pF GRM1885C2A8R4WA01#

±0.1pF GRM1885C2A8R4BA01#

±0.25pF GRM1885C2A8R4CA01#

±0.5pF GRM1885C2A8R4DA01#

8.5pF ±0.05pF GRM1885C2A8R5WA01#

±0.1pF GRM1885C2A8R5BA01#

±0.25pF GRM1885C2A8R5CA01#

±0.5pF GRM1885C2A8R5DA01#

8.6pF ±0.05pF GRM1885C2A8R6WA01#

±0.1pF GRM1885C2A8R6BA01#

±0.25pF GRM1885C2A8R6CA01#

±0.5pF GRM1885C2A8R6DA01#

8.7pF ±0.05pF GRM1885C2A8R7WA01#

±0.1pF GRM1885C2A8R7BA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 8.7pF ±0.25pF GRM1885C2A8R7CA01#

±0.5pF GRM1885C2A8R7DA01#

8.8pF ±0.05pF GRM1885C2A8R8WA01#

±0.1pF GRM1885C2A8R8BA01#

±0.25pF GRM1885C2A8R8CA01#

±0.5pF GRM1885C2A8R8DA01#

8.9pF ±0.05pF GRM1885C2A8R9WA01#

±0.1pF GRM1885C2A8R9BA01#

±0.25pF GRM1885C2A8R9CA01#

±0.5pF GRM1885C2A8R9DA01#

9.0pF ±0.05pF GRM1885C2A9R0WA01#

±0.1pF GRM1885C2A9R0BA01#

±0.25pF GRM1885C2A9R0CA01#

±0.5pF GRM1885C2A9R0DA01#

9.1pF ±0.05pF GRM1885C2A9R1WA01#

±0.1pF GRM1885C2A9R1BA01#

±0.25pF GRM1885C2A9R1CA01#

±0.5pF GRM1885C2A9R1DA01#

9.2pF ±0.05pF GRM1885C2A9R2WA01#

±0.1pF GRM1885C2A9R2BA01#

±0.25pF GRM1885C2A9R2CA01#

±0.5pF GRM1885C2A9R2DA01#

9.3pF ±0.05pF GRM1885C2A9R3WA01#

±0.1pF GRM1885C2A9R3BA01#

±0.25pF GRM1885C2A9R3CA01#

±0.5pF GRM1885C2A9R3DA01#

9.4pF ±0.05pF GRM1885C2A9R4WA01#

±0.1pF GRM1885C2A9R4BA01#

±0.25pF GRM1885C2A9R4CA01#

±0.5pF GRM1885C2A9R4DA01#

9.5pF ±0.05pF GRM1885C2A9R5WA01#

±0.1pF GRM1885C2A9R5BA01#

±0.25pF GRM1885C2A9R5CA01#

±0.5pF GRM1885C2A9R5DA01#

9.6pF ±0.05pF GRM1885C2A9R6WA01#

±0.1pF GRM1885C2A9R6BA01#

±0.25pF GRM1885C2A9R6CA01#

±0.5pF GRM1885C2A9R6DA01#

9.7pF ±0.05pF GRM1885C2A9R7WA01#

±0.1pF GRM1885C2A9R7BA01#

±0.25pF GRM1885C2A9R7CA01#

±0.5pF GRM1885C2A9R7DA01#

9.8pF ±0.05pF GRM1885C2A9R8WA01#

±0.1pF GRM1885C2A9R8BA01#

±0.25pF GRM1885C2A9R8CA01#

±0.5pF GRM1885C2A9R8DA01#

9.9pF ±0.05pF GRM1885C2A9R9WA01#

±0.1pF GRM1885C2A9R9BA01#

±0.25pF GRM1885C2A9R9CA01#

±0.5pF GRM1885C2A9R9DA01#

10pF ±5% GRM1885C2A100JA01#

12pF ±5% GRM1885C2A120JA01#

15pF ±5% GRM1885C2A150JA01#

18pF ±5% GRM1885C2A180JA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 22pF ±5% GRM1885C2A220JA01#

27pF ±5% GRM1885C2A270JA01#

33pF ±5% GRM1885C2A330JA01#

39pF ±5% GRM1885C2A390JA01#

47pF ±5% GRM1885C2A470JA01#

56pF ±5% GRM1885C2A560JA01#

68pF ±5% GRM1885C2A680JA01#

82pF ±5% GRM1885C2A820JA01#

100pF ±5% GRM1885C2A101JA01#

120pF ±5% GRM1885C2A121JA01#

150pF ±5% GRM1885C2A151JA01#

180pF ±5% GRM1885C2A181JA01#

220pF ±5% GRM1885C2A221JA01#

270pF ±5% GRM1885C2A271JA01#

330pF ±5% GRM1885C2A331JA01#

390pF ±5% GRM1885C2A391JA01#

470pF ±5% GRM1885C2A471JA01#

560pF ±5% GRM1885C2A561JA01#

680pF ±5% GRM1885C2A681JA01#

820pF ±5% GRM1885C2A821JA01#

1000pF ±5% GRM1885C2A102JA01#

1200pF ±5% GRM1885C2A122JA01#

1500pF ±5% GRM1885C2A152JA01#

CK 0.5pF ±0.05pF GRM1884C2AR50WA01#

±0.1pF GRM1884C2AR50BA01#

0.6pF ±0.05pF GRM1884C2AR60WA01#

±0.1pF GRM1884C2AR60BA01#

0.7pF ±0.05pF GRM1884C2AR70WA01#

±0.1pF GRM1884C2AR70BA01#

0.8pF ±0.05pF GRM1884C2AR80WA01#

±0.1pF GRM1884C2AR80BA01#

0.9pF ±0.05pF GRM1884C2AR90WA01#

±0.1pF GRM1884C2AR90BA01#

1.0pF ±0.05pF GRM1884C2A1R0WA01#

±0.1pF GRM1884C2A1R0BA01#

±0.25pF GRM1884C2A1R0CA01#

1.1pF ±0.05pF GRM1884C2A1R1WA01#

±0.1pF GRM1884C2A1R1BA01#

±0.25pF GRM1884C2A1R1CA01#

1.2pF ±0.05pF GRM1884C2A1R2WA01#

±0.1pF GRM1884C2A1R2BA01#

±0.25pF GRM1884C2A1R2CA01#

1.3pF ±0.05pF GRM1884C2A1R3WA01#

±0.1pF GRM1884C2A1R3BA01#

±0.25pF GRM1884C2A1R3CA01#

1.4pF ±0.05pF GRM1884C2A1R4WA01#

±0.1pF GRM1884C2A1R4BA01#

±0.25pF GRM1884C2A1R4CA01#

1.5pF ±0.05pF GRM1884C2A1R5WA01#

±0.1pF GRM1884C2A1R5BA01#

±0.25pF GRM1884C2A1R5CA01#

1.6pF ±0.05pF GRM1884C2A1R6WA01#

±0.1pF GRM1884C2A1R6BA01#

±0.25pF GRM1884C2A1R6CA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CK 1.7pF ±0.05pF GRM1884C2A1R7WA01#

±0.1pF GRM1884C2A1R7BA01#

±0.25pF GRM1884C2A1R7CA01#

1.8pF ±0.05pF GRM1884C2A1R8WA01#

±0.1pF GRM1884C2A1R8BA01#

±0.25pF GRM1884C2A1R8CA01#

1.9pF ±0.05pF GRM1884C2A1R9WA01#

±0.1pF GRM1884C2A1R9BA01#

±0.25pF GRM1884C2A1R9CA01#

2.0pF ±0.05pF GRM1884C2A2R0WA01#

±0.1pF GRM1884C2A2R0BA01#

±0.25pF GRM1884C2A2R0CA01#

CJ 2.1pF ±0.05pF GRM1883C2A2R1WA01#

±0.1pF GRM1883C2A2R1BA01#

±0.25pF GRM1883C2A2R1CA01#

2.2pF ±0.05pF GRM1883C2A2R2WA01#

±0.1pF GRM1883C2A2R2BA01#

±0.25pF GRM1883C2A2R2CA01#

2.3pF ±0.05pF GRM1883C2A2R3WA01#

±0.1pF GRM1883C2A2R3BA01#

±0.25pF GRM1883C2A2R3CA01#

2.4pF ±0.05pF GRM1883C2A2R4WA01#

±0.1pF GRM1883C2A2R4BA01#

±0.25pF GRM1883C2A2R4CA01#

2.5pF ±0.05pF GRM1883C2A2R5WA01#

±0.1pF GRM1883C2A2R5BA01#

±0.25pF GRM1883C2A2R5CA01#

2.6pF ±0.05pF GRM1883C2A2R6WA01#

±0.1pF GRM1883C2A2R6BA01#

±0.25pF GRM1883C2A2R6CA01#

2.7pF ±0.05pF GRM1883C2A2R7WA01#

±0.1pF GRM1883C2A2R7BA01#

±0.25pF GRM1883C2A2R7CA01#

2.8pF ±0.05pF GRM1883C2A2R8WA01#

±0.1pF GRM1883C2A2R8BA01#

±0.25pF GRM1883C2A2R8CA01#

2.9pF ±0.05pF GRM1883C2A2R9WA01#

±0.1pF GRM1883C2A2R9BA01#

±0.25pF GRM1883C2A2R9CA01#

3.0pF ±0.05pF GRM1883C2A3R0WA01#

±0.1pF GRM1883C2A3R0BA01#

±0.25pF GRM1883C2A3R0CA01#

3.1pF ±0.05pF GRM1883C2A3R1WA01#

±0.1pF GRM1883C2A3R1BA01#

±0.25pF GRM1883C2A3R1CA01#

3.2pF ±0.05pF GRM1883C2A3R2WA01#

±0.1pF GRM1883C2A3R2BA01#

±0.25pF GRM1883C2A3R2CA01#

3.3pF ±0.05pF GRM1883C2A3R3WA01#

±0.1pF GRM1883C2A3R3BA01#

±0.25pF GRM1883C2A3R3CA01#

3.4pF ±0.05pF GRM1883C2A3R4WA01#

±0.1pF GRM1883C2A3R4BA01#

±0.25pF GRM1883C2A3R4CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CJ 3.5pF ±0.05pF GRM1883C2A3R5WA01#

±0.1pF GRM1883C2A3R5BA01#

±0.25pF GRM1883C2A3R5CA01#

3.6pF ±0.05pF GRM1883C2A3R6WA01#

±0.1pF GRM1883C2A3R6BA01#

±0.25pF GRM1883C2A3R6CA01#

3.7pF ±0.05pF GRM1883C2A3R7WA01#

±0.1pF GRM1883C2A3R7BA01#

±0.25pF GRM1883C2A3R7CA01#

3.8pF ±0.05pF GRM1883C2A3R8WA01#

±0.1pF GRM1883C2A3R8BA01#

±0.25pF GRM1883C2A3R8CA01#

3.9pF ±0.05pF GRM1883C2A3R9WA01#

±0.1pF GRM1883C2A3R9BA01#

±0.25pF GRM1883C2A3R9CA01#

CH 4.0pF ±0.05pF GRM1882C2A4R0WA01#

±0.1pF GRM1882C2A4R0BA01#

±0.25pF GRM1882C2A4R0CA01#

4.1pF ±0.05pF GRM1882C2A4R1WA01#

±0.1pF GRM1882C2A4R1BA01#

±0.25pF GRM1882C2A4R1CA01#

4.2pF ±0.05pF GRM1882C2A4R2WA01#

±0.1pF GRM1882C2A4R2BA01#

±0.25pF GRM1882C2A4R2CA01#

4.3pF ±0.05pF GRM1882C2A4R3WA01#

±0.1pF GRM1882C2A4R3BA01#

±0.25pF GRM1882C2A4R3CA01#

4.4pF ±0.05pF GRM1882C2A4R4WA01#

±0.1pF GRM1882C2A4R4BA01#

±0.25pF GRM1882C2A4R4CA01#

4.5pF ±0.05pF GRM1882C2A4R5WA01#

±0.1pF GRM1882C2A4R5BA01#

±0.25pF GRM1882C2A4R5CA01#

4.6pF ±0.05pF GRM1882C2A4R6WA01#

±0.1pF GRM1882C2A4R6BA01#

±0.25pF GRM1882C2A4R6CA01#

4.7pF ±0.05pF GRM1882C2A4R7WA01#

±0.1pF GRM1882C2A4R7BA01#

±0.25pF GRM1882C2A4R7CA01#

4.8pF ±0.05pF GRM1882C2A4R8WA01#

±0.1pF GRM1882C2A4R8BA01#

±0.25pF GRM1882C2A4R8CA01#

4.9pF ±0.05pF GRM1882C2A4R9WA01#

±0.1pF GRM1882C2A4R9BA01#

±0.25pF GRM1882C2A4R9CA01#

5.0pF ±0.05pF GRM1882C2A5R0WA01#

±0.1pF GRM1882C2A5R0BA01#

±0.25pF GRM1882C2A5R0CA01#

5.1pF ±0.05pF GRM1882C2A5R1WA01#

±0.1pF GRM1882C2A5R1BA01#

±0.25pF GRM1882C2A5R1CA01#

±0.5pF GRM1882C2A5R1DA01#

5.2pF ±0.05pF GRM1882C2A5R2WA01#

±0.1pF GRM1882C2A5R2BA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CH 5.2pF ±0.25pF GRM1882C2A5R2CA01#

±0.5pF GRM1882C2A5R2DA01#

5.3pF ±0.05pF GRM1882C2A5R3WA01#

±0.1pF GRM1882C2A5R3BA01#

±0.25pF GRM1882C2A5R3CA01#

±0.5pF GRM1882C2A5R3DA01#

5.4pF ±0.05pF GRM1882C2A5R4WA01#

±0.1pF GRM1882C2A5R4BA01#

±0.25pF GRM1882C2A5R4CA01#

±0.5pF GRM1882C2A5R4DA01#

5.5pF ±0.05pF GRM1882C2A5R5WA01#

±0.1pF GRM1882C2A5R5BA01#

±0.25pF GRM1882C2A5R5CA01#

±0.5pF GRM1882C2A5R5DA01#

5.6pF ±0.05pF GRM1882C2A5R6WA01#

±0.1pF GRM1882C2A5R6BA01#

±0.25pF GRM1882C2A5R6CA01#

±0.5pF GRM1882C2A5R6DA01#

5.7pF ±0.05pF GRM1882C2A5R7WA01#

±0.1pF GRM1882C2A5R7BA01#

±0.25pF GRM1882C2A5R7CA01#

±0.5pF GRM1882C2A5R7DA01#

5.8pF ±0.05pF GRM1882C2A5R8WA01#

±0.1pF GRM1882C2A5R8BA01#

±0.25pF GRM1882C2A5R8CA01#

±0.5pF GRM1882C2A5R8DA01#

5.9pF ±0.05pF GRM1882C2A5R9WA01#

±0.1pF GRM1882C2A5R9BA01#

±0.25pF GRM1882C2A5R9CA01#

±0.5pF GRM1882C2A5R9DA01#

6.0pF ±0.05pF GRM1882C2A6R0WA01#

±0.1pF GRM1882C2A6R0BA01#

±0.25pF GRM1882C2A6R0CA01#

±0.5pF GRM1882C2A6R0DA01#

6.1pF ±0.05pF GRM1882C2A6R1WA01#

±0.1pF GRM1882C2A6R1BA01#

±0.25pF GRM1882C2A6R1CA01#

±0.5pF GRM1882C2A6R1DA01#

6.2pF ±0.05pF GRM1882C2A6R2WA01#

±0.1pF GRM1882C2A6R2BA01#

±0.25pF GRM1882C2A6R2CA01#

±0.5pF GRM1882C2A6R2DA01#

6.3pF ±0.05pF GRM1882C2A6R3WA01#

±0.1pF GRM1882C2A6R3BA01#

±0.25pF GRM1882C2A6R3CA01#

±0.5pF GRM1882C2A6R3DA01#

6.4pF ±0.05pF GRM1882C2A6R4WA01#

±0.1pF GRM1882C2A6R4BA01#

±0.25pF GRM1882C2A6R4CA01#

±0.5pF GRM1882C2A6R4DA01#

6.5pF ±0.05pF GRM1882C2A6R5WA01#

±0.1pF GRM1882C2A6R5BA01#

±0.25pF GRM1882C2A6R5CA01#

±0.5pF GRM1882C2A6R5DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CH 6.6pF ±0.05pF GRM1882C2A6R6WA01#

±0.1pF GRM1882C2A6R6BA01#

±0.25pF GRM1882C2A6R6CA01#

±0.5pF GRM1882C2A6R6DA01#

6.7pF ±0.05pF GRM1882C2A6R7WA01#

±0.1pF GRM1882C2A6R7BA01#

±0.25pF GRM1882C2A6R7CA01#

±0.5pF GRM1882C2A6R7DA01#

6.8pF ±0.05pF GRM1882C2A6R8WA01#

±0.1pF GRM1882C2A6R8BA01#

±0.25pF GRM1882C2A6R8CA01#

±0.5pF GRM1882C2A6R8DA01#

6.9pF ±0.05pF GRM1882C2A6R9WA01#

±0.1pF GRM1882C2A6R9BA01#

±0.25pF GRM1882C2A6R9CA01#

±0.5pF GRM1882C2A6R9DA01#

7.0pF ±0.05pF GRM1882C2A7R0WA01#

±0.1pF GRM1882C2A7R0BA01#

±0.25pF GRM1882C2A7R0CA01#

±0.5pF GRM1882C2A7R0DA01#

7.1pF ±0.05pF GRM1882C2A7R1WA01#

±0.1pF GRM1882C2A7R1BA01#

±0.25pF GRM1882C2A7R1CA01#

±0.5pF GRM1882C2A7R1DA01#

7.2pF ±0.05pF GRM1882C2A7R2WA01#

±0.1pF GRM1882C2A7R2BA01#

±0.25pF GRM1882C2A7R2CA01#

±0.5pF GRM1882C2A7R2DA01#

7.3pF ±0.05pF GRM1882C2A7R3WA01#

±0.1pF GRM1882C2A7R3BA01#

±0.25pF GRM1882C2A7R3CA01#

±0.5pF GRM1882C2A7R3DA01#

7.4pF ±0.05pF GRM1882C2A7R4WA01#

±0.1pF GRM1882C2A7R4BA01#

±0.25pF GRM1882C2A7R4CA01#

±0.5pF GRM1882C2A7R4DA01#

7.5pF ±0.05pF GRM1882C2A7R5WA01#

±0.1pF GRM1882C2A7R5BA01#

±0.25pF GRM1882C2A7R5CA01#

±0.5pF GRM1882C2A7R5DA01#

7.6pF ±0.05pF GRM1882C2A7R6WA01#

±0.1pF GRM1882C2A7R6BA01#

±0.25pF GRM1882C2A7R6CA01#

±0.5pF GRM1882C2A7R6DA01#

7.7pF ±0.05pF GRM1882C2A7R7WA01#

±0.1pF GRM1882C2A7R7BA01#

±0.25pF GRM1882C2A7R7CA01#

±0.5pF GRM1882C2A7R7DA01#

7.8pF ±0.05pF GRM1882C2A7R8WA01#

±0.1pF GRM1882C2A7R8BA01#

±0.25pF GRM1882C2A7R8CA01#

±0.5pF GRM1882C2A7R8DA01#

7.9pF ±0.05pF GRM1882C2A7R9WA01#

±0.1pF GRM1882C2A7R9BA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CH 7.9pF ±0.25pF GRM1882C2A7R9CA01#

±0.5pF GRM1882C2A7R9DA01#

8.0pF ±0.05pF GRM1882C2A8R0WA01#

±0.1pF GRM1882C2A8R0BA01#

±0.25pF GRM1882C2A8R0CA01#

±0.5pF GRM1882C2A8R0DA01#

8.1pF ±0.05pF GRM1882C2A8R1WA01#

±0.1pF GRM1882C2A8R1BA01#

±0.25pF GRM1882C2A8R1CA01#

±0.5pF GRM1882C2A8R1DA01#

8.2pF ±0.05pF GRM1882C2A8R2WA01#

±0.1pF GRM1882C2A8R2BA01#

±0.25pF GRM1882C2A8R2CA01#

±0.5pF GRM1882C2A8R2DA01#

8.3pF ±0.05pF GRM1882C2A8R3WA01#

±0.1pF GRM1882C2A8R3BA01#

±0.25pF GRM1882C2A8R3CA01#

±0.5pF GRM1882C2A8R3DA01#

8.4pF ±0.05pF GRM1882C2A8R4WA01#

±0.1pF GRM1882C2A8R4BA01#

±0.25pF GRM1882C2A8R4CA01#

±0.5pF GRM1882C2A8R4DA01#

8.5pF ±0.05pF GRM1882C2A8R5WA01#

±0.1pF GRM1882C2A8R5BA01#

±0.25pF GRM1882C2A8R5CA01#

±0.5pF GRM1882C2A8R5DA01#

8.6pF ±0.05pF GRM1882C2A8R6WA01#

±0.1pF GRM1882C2A8R6BA01#

±0.25pF GRM1882C2A8R6CA01#

±0.5pF GRM1882C2A8R6DA01#

8.7pF ±0.05pF GRM1882C2A8R7WA01#

±0.1pF GRM1882C2A8R7BA01#

±0.25pF GRM1882C2A8R7CA01#

±0.5pF GRM1882C2A8R7DA01#

8.8pF ±0.05pF GRM1882C2A8R8WA01#

±0.1pF GRM1882C2A8R8BA01#

±0.25pF GRM1882C2A8R8CA01#

±0.5pF GRM1882C2A8R8DA01#

8.9pF ±0.05pF GRM1882C2A8R9WA01#

±0.1pF GRM1882C2A8R9BA01#

±0.25pF GRM1882C2A8R9CA01#

±0.5pF GRM1882C2A8R9DA01#

9.0pF ±0.05pF GRM1882C2A9R0WA01#

±0.1pF GRM1882C2A9R0BA01#

±0.25pF GRM1882C2A9R0CA01#

±0.5pF GRM1882C2A9R0DA01#

9.1pF ±0.05pF GRM1882C2A9R1WA01#

±0.1pF GRM1882C2A9R1BA01#

±0.25pF GRM1882C2A9R1CA01#

±0.5pF GRM1882C2A9R1DA01#

9.2pF ±0.05pF GRM1882C2A9R2WA01#

±0.1pF GRM1882C2A9R2BA01#

±0.25pF GRM1882C2A9R2CA01#

±0.5pF GRM1882C2A9R2DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CH 9.3pF ±0.05pF GRM1882C2A9R3WA01#

±0.1pF GRM1882C2A9R3BA01#

±0.25pF GRM1882C2A9R3CA01#

±0.5pF GRM1882C2A9R3DA01#

9.4pF ±0.05pF GRM1882C2A9R4WA01#

±0.1pF GRM1882C2A9R4BA01#

±0.25pF GRM1882C2A9R4CA01#

±0.5pF GRM1882C2A9R4DA01#

9.5pF ±0.05pF GRM1882C2A9R5WA01#

±0.1pF GRM1882C2A9R5BA01#

±0.25pF GRM1882C2A9R5CA01#

±0.5pF GRM1882C2A9R5DA01#

9.6pF ±0.05pF GRM1882C2A9R6WA01#

±0.1pF GRM1882C2A9R6BA01#

±0.25pF GRM1882C2A9R6CA01#

±0.5pF GRM1882C2A9R6DA01#

9.7pF ±0.05pF GRM1882C2A9R7WA01#

±0.1pF GRM1882C2A9R7BA01#

±0.25pF GRM1882C2A9R7CA01#

±0.5pF GRM1882C2A9R7DA01#

9.8pF ±0.05pF GRM1882C2A9R8WA01#

±0.1pF GRM1882C2A9R8BA01#

±0.25pF GRM1882C2A9R8CA01#

±0.5pF GRM1882C2A9R8DA01#

9.9pF ±0.05pF GRM1882C2A9R9WA01#

±0.1pF GRM1882C2A9R9BA01#

±0.25pF GRM1882C2A9R9CA01#

±0.5pF GRM1882C2A9R9DA01#

10pF ±5% GRM1882C2A100JA01#

12pF ±5% GRM1882C2A120JA01#

15pF ±5% GRM1882C2A150JA01#

18pF ±5% GRM1882C2A180JA01#

22pF ±5% GRM1882C2A220JA01#

27pF ±5% GRM1882C2A270JA01#

33pF ±5% GRM1882C2A330JA01#

39pF ±5% GRM1882C2A390JA01#

47pF ±5% GRM1882C2A470JA01#

56pF ±5% GRM1882C2A560JA01#

68pF ±5% GRM1882C2A680JA01#

82pF ±5% GRM1882C2A820JA01#

100pF ±5% GRM1882C2A101JA01#

120pF ±5% GRM1882C2A121JA01#

150pF ±5% GRM1882C2A151JA01#

180pF ±5% GRM1882C2A181JA01#

220pF ±5% GRM1882C2A221JA01#

270pF ±5% GRM1882C2A271JA01#

330pF ±5% GRM1882C2A331JA01#

390pF ±5% GRM1882C2A391JA01#

470pF ±5% GRM1882C2A471JA01#

560pF ±5% GRM1882C2A561JA01#

680pF ±5% GRM1882C2A681JA01#

820pF ±5% GRM1882C2A821JA01#

1000pF ±5% GRM1882C2A102JA01#

1200pF ±5% GRM1882C2A122JA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CH 1500pF ±5% GRM1882C2A152JA01#

50Vdc C0G 0.5pF ±0.05pF GRM1885C1HR50WA01#

±0.1pF GRM1885C1HR50BA01#

0.6pF ±0.05pF GRM1885C1HR60WA01#

±0.1pF GRM1885C1HR60BA01#

0.7pF ±0.05pF GRM1885C1HR70WA01#

±0.1pF GRM1885C1HR70BA01#

0.8pF ±0.05pF GRM1885C1HR80WA01#

±0.1pF GRM1885C1HR80BA01#

0.9pF ±0.05pF GRM1885C1HR90WA01#

±0.1pF GRM1885C1HR90BA01#

1.0pF ±0.05pF GRM1885C1H1R0WA01#

±0.1pF GRM1885C1H1R0BA01#

±0.25pF GRM1885C1H1R0CA01#

1.1pF ±0.05pF GRM1885C1H1R1WA01#

±0.1pF GRM1885C1H1R1BA01#

±0.25pF GRM1885C1H1R1CA01#

1.2pF ±0.05pF GRM1885C1H1R2WA01#

±0.1pF GRM1885C1H1R2BA01#

±0.25pF GRM1885C1H1R2CA01#

1.3pF ±0.05pF GRM1885C1H1R3WA01#

±0.1pF GRM1885C1H1R3BA01#

±0.25pF GRM1885C1H1R3CA01#

1.4pF ±0.05pF GRM1885C1H1R4WA01#

±0.1pF GRM1885C1H1R4BA01#

±0.25pF GRM1885C1H1R4CA01#

1.5pF ±0.05pF GRM1885C1H1R5WA01#

±0.1pF GRM1885C1H1R5BA01#

±0.25pF GRM1885C1H1R5CA01#

1.6pF ±0.05pF GRM1885C1H1R6WA01#

±0.1pF GRM1885C1H1R6BA01#

±0.25pF GRM1885C1H1R6CA01#

1.7pF ±0.05pF GRM1885C1H1R7WA01#

±0.1pF GRM1885C1H1R7BA01#

±0.25pF GRM1885C1H1R7CA01#

1.8pF ±0.05pF GRM1885C1H1R8WA01#

±0.1pF GRM1885C1H1R8BA01#

±0.25pF GRM1885C1H1R8CA01#

1.9pF ±0.05pF GRM1885C1H1R9WA01#

±0.1pF GRM1885C1H1R9BA01#

±0.25pF GRM1885C1H1R9CA01#

2.0pF ±0.05pF GRM1885C1H2R0WA01#

±0.1pF GRM1885C1H2R0BA01#

±0.25pF GRM1885C1H2R0CA01#

2.1pF ±0.05pF GRM1885C1H2R1WA01#

±0.1pF GRM1885C1H2R1BA01#

±0.25pF GRM1885C1H2R1CA01#

2.2pF ±0.05pF GRM1885C1H2R2WA01#

±0.1pF GRM1885C1H2R2BA01#

±0.25pF GRM1885C1H2R2CA01#

2.3pF ±0.05pF GRM1885C1H2R3WA01#

±0.1pF GRM1885C1H2R3BA01#

±0.25pF GRM1885C1H2R3CA01#

2.4pF ±0.05pF GRM1885C1H2R4WA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 2.4pF ±0.1pF GRM1885C1H2R4BA01#

±0.25pF GRM1885C1H2R4CA01#

2.5pF ±0.05pF GRM1885C1H2R5WA01#

±0.1pF GRM1885C1H2R5BA01#

±0.25pF GRM1885C1H2R5CA01#

2.6pF ±0.05pF GRM1885C1H2R6WA01#

±0.1pF GRM1885C1H2R6BA01#

±0.25pF GRM1885C1H2R6CA01#

2.7pF ±0.05pF GRM1885C1H2R7WA01#

±0.1pF GRM1885C1H2R7BA01#

±0.25pF GRM1885C1H2R7CA01#

2.8pF ±0.05pF GRM1885C1H2R8WA01#

±0.1pF GRM1885C1H2R8BA01#

±0.25pF GRM1885C1H2R8CA01#

2.9pF ±0.05pF GRM1885C1H2R9WA01#

±0.1pF GRM1885C1H2R9BA01#

±0.25pF GRM1885C1H2R9CA01#

3.0pF ±0.05pF GRM1885C1H3R0WA01#

±0.1pF GRM1885C1H3R0BA01#

±0.25pF GRM1885C1H3R0CA01#

3.1pF ±0.05pF GRM1885C1H3R1WA01#

±0.1pF GRM1885C1H3R1BA01#

±0.25pF GRM1885C1H3R1CA01#

3.2pF ±0.05pF GRM1885C1H3R2WA01#

±0.1pF GRM1885C1H3R2BA01#

±0.25pF GRM1885C1H3R2CA01#

3.3pF ±0.05pF GRM1885C1H3R3WA01#

±0.1pF GRM1885C1H3R3BA01#

±0.25pF GRM1885C1H3R3CA01#

3.4pF ±0.05pF GRM1885C1H3R4WA01#

±0.1pF GRM1885C1H3R4BA01#

±0.25pF GRM1885C1H3R4CA01#

3.5pF ±0.05pF GRM1885C1H3R5WA01#

±0.1pF GRM1885C1H3R5BA01#

±0.25pF GRM1885C1H3R5CA01#

3.6pF ±0.05pF GRM1885C1H3R6WA01#

±0.1pF GRM1885C1H3R6BA01#

±0.25pF GRM1885C1H3R6CA01#

3.7pF ±0.05pF GRM1885C1H3R7WA01#

±0.1pF GRM1885C1H3R7BA01#

±0.25pF GRM1885C1H3R7CA01#

3.8pF ±0.05pF GRM1885C1H3R8WA01#

±0.1pF GRM1885C1H3R8BA01#

±0.25pF GRM1885C1H3R8CA01#

3.9pF ±0.05pF GRM1885C1H3R9WA01#

±0.1pF GRM1885C1H3R9BA01#

±0.25pF GRM1885C1H3R9CA01#

4.0pF ±0.05pF GRM1885C1H4R0WA01#

±0.1pF GRM1885C1H4R0BA01#

±0.25pF GRM1885C1H4R0CA01#

4.1pF ±0.05pF GRM1885C1H4R1WA01#

±0.1pF GRM1885C1H4R1BA01#

±0.25pF GRM1885C1H4R1CA01#

4.2pF ±0.05pF GRM1885C1H4R2WA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 4.2pF ±0.1pF GRM1885C1H4R2BA01#

±0.25pF GRM1885C1H4R2CA01#

4.3pF ±0.05pF GRM1885C1H4R3WA01#

±0.1pF GRM1885C1H4R3BA01#

±0.25pF GRM1885C1H4R3CA01#

4.4pF ±0.05pF GRM1885C1H4R4WA01#

±0.1pF GRM1885C1H4R4BA01#

±0.25pF GRM1885C1H4R4CA01#

4.5pF ±0.05pF GRM1885C1H4R5WA01#

±0.1pF GRM1885C1H4R5BA01#

±0.25pF GRM1885C1H4R5CA01#

4.6pF ±0.05pF GRM1885C1H4R6WA01#

±0.1pF GRM1885C1H4R6BA01#

±0.25pF GRM1885C1H4R6CA01#

4.7pF ±0.05pF GRM1885C1H4R7WA01#

±0.1pF GRM1885C1H4R7BA01#

±0.25pF GRM1885C1H4R7CA01#

4.8pF ±0.05pF GRM1885C1H4R8WA01#

±0.1pF GRM1885C1H4R8BA01#

±0.25pF GRM1885C1H4R8CA01#

4.9pF ±0.05pF GRM1885C1H4R9WA01#

±0.1pF GRM1885C1H4R9BA01#

±0.25pF GRM1885C1H4R9CA01#

5.0pF ±0.05pF GRM1885C1H5R0WA01#

±0.1pF GRM1885C1H5R0BA01#

±0.25pF GRM1885C1H5R0CA01#

5.1pF ±0.05pF GRM1885C1H5R1WA01#

±0.1pF GRM1885C1H5R1BA01#

±0.25pF GRM1885C1H5R1CA01#

±0.5pF GRM1885C1H5R1DA01#

5.2pF ±0.05pF GRM1885C1H5R2WA01#

±0.1pF GRM1885C1H5R2BA01#

±0.25pF GRM1885C1H5R2CA01#

±0.5pF GRM1885C1H5R2DA01#

5.3pF ±0.05pF GRM1885C1H5R3WA01#

±0.1pF GRM1885C1H5R3BA01#

±0.25pF GRM1885C1H5R3CA01#

±0.5pF GRM1885C1H5R3DA01#

5.4pF ±0.05pF GRM1885C1H5R4WA01#

±0.1pF GRM1885C1H5R4BA01#

±0.25pF GRM1885C1H5R4CA01#

±0.5pF GRM1885C1H5R4DA01#

5.5pF ±0.05pF GRM1885C1H5R5WA01#

±0.1pF GRM1885C1H5R5BA01#

±0.25pF GRM1885C1H5R5CA01#

±0.5pF GRM1885C1H5R5DA01#

5.6pF ±0.05pF GRM1885C1H5R6WA01#

±0.1pF GRM1885C1H5R6BA01#

±0.25pF GRM1885C1H5R6CA01#

±0.5pF GRM1885C1H5R6DA01#

5.7pF ±0.05pF GRM1885C1H5R7WA01#

±0.1pF GRM1885C1H5R7BA01#

±0.25pF GRM1885C1H5R7CA01#

±0.5pF GRM1885C1H5R7DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 5.8pF ±0.05pF GRM1885C1H5R8WA01#

±0.1pF GRM1885C1H5R8BA01#

±0.25pF GRM1885C1H5R8CA01#

±0.5pF GRM1885C1H5R8DA01#

5.9pF ±0.05pF GRM1885C1H5R9WA01#

±0.1pF GRM1885C1H5R9BA01#

±0.25pF GRM1885C1H5R9CA01#

±0.5pF GRM1885C1H5R9DA01#

6.0pF ±0.05pF GRM1885C1H6R0WA01#

±0.1pF GRM1885C1H6R0BA01#

±0.25pF GRM1885C1H6R0CA01#

±0.5pF GRM1885C1H6R0DA01#

6.1pF ±0.05pF GRM1885C1H6R1WA01#

±0.1pF GRM1885C1H6R1BA01#

±0.25pF GRM1885C1H6R1CA01#

±0.5pF GRM1885C1H6R1DA01#

6.2pF ±0.05pF GRM1885C1H6R2WA01#

±0.1pF GRM1885C1H6R2BA01#

±0.25pF GRM1885C1H6R2CA01#

±0.5pF GRM1885C1H6R2DA01#

6.3pF ±0.05pF GRM1885C1H6R3WA01#

±0.1pF GRM1885C1H6R3BA01#

±0.25pF GRM1885C1H6R3CA01#

±0.5pF GRM1885C1H6R3DA01#

6.4pF ±0.05pF GRM1885C1H6R4WA01#

±0.1pF GRM1885C1H6R4BA01#

±0.25pF GRM1885C1H6R4CA01#

±0.5pF GRM1885C1H6R4DA01#

6.5pF ±0.05pF GRM1885C1H6R5WA01#

±0.1pF GRM1885C1H6R5BA01#

±0.25pF GRM1885C1H6R5CA01#

±0.5pF GRM1885C1H6R5DA01#

6.6pF ±0.05pF GRM1885C1H6R6WA01#

±0.1pF GRM1885C1H6R6BA01#

±0.25pF GRM1885C1H6R6CA01#

±0.5pF GRM1885C1H6R6DA01#

6.7pF ±0.05pF GRM1885C1H6R7WA01#

±0.1pF GRM1885C1H6R7BA01#

±0.25pF GRM1885C1H6R7CA01#

±0.5pF GRM1885C1H6R7DA01#

6.8pF ±0.05pF GRM1885C1H6R8WA01#

±0.1pF GRM1885C1H6R8BA01#

±0.25pF GRM1885C1H6R8CA01#

±0.5pF GRM1885C1H6R8DA01#

6.9pF ±0.05pF GRM1885C1H6R9WA01#

±0.1pF GRM1885C1H6R9BA01#

±0.25pF GRM1885C1H6R9CA01#

±0.5pF GRM1885C1H6R9DA01#

7.0pF ±0.05pF GRM1885C1H7R0WA01#

±0.1pF GRM1885C1H7R0BA01#

±0.25pF GRM1885C1H7R0CA01#

±0.5pF GRM1885C1H7R0DA01#

7.1pF ±0.05pF GRM1885C1H7R1WA01#

±0.1pF GRM1885C1H7R1BA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 7.1pF ±0.25pF GRM1885C1H7R1CA01#

±0.5pF GRM1885C1H7R1DA01#

7.2pF ±0.05pF GRM1885C1H7R2WA01#

±0.1pF GRM1885C1H7R2BA01#

±0.25pF GRM1885C1H7R2CA01#

±0.5pF GRM1885C1H7R2DA01#

7.3pF ±0.05pF GRM1885C1H7R3WA01#

±0.1pF GRM1885C1H7R3BA01#

±0.25pF GRM1885C1H7R3CA01#

±0.5pF GRM1885C1H7R3DA01#

7.4pF ±0.05pF GRM1885C1H7R4WA01#

±0.1pF GRM1885C1H7R4BA01#

±0.25pF GRM1885C1H7R4CA01#

±0.5pF GRM1885C1H7R4DA01#

7.5pF ±0.05pF GRM1885C1H7R5WA01#

±0.1pF GRM1885C1H7R5BA01#

±0.25pF GRM1885C1H7R5CA01#

±0.5pF GRM1885C1H7R5DA01#

7.6pF ±0.05pF GRM1885C1H7R6WA01#

±0.1pF GRM1885C1H7R6BA01#

±0.25pF GRM1885C1H7R6CA01#

±0.5pF GRM1885C1H7R6DA01#

7.7pF ±0.05pF GRM1885C1H7R7WA01#

±0.1pF GRM1885C1H7R7BA01#

±0.25pF GRM1885C1H7R7CA01#

±0.5pF GRM1885C1H7R7DA01#

7.8pF ±0.05pF GRM1885C1H7R8WA01#

±0.1pF GRM1885C1H7R8BA01#

±0.25pF GRM1885C1H7R8CA01#

±0.5pF GRM1885C1H7R8DA01#

7.9pF ±0.05pF GRM1885C1H7R9WA01#

±0.1pF GRM1885C1H7R9BA01#

±0.25pF GRM1885C1H7R9CA01#

±0.5pF GRM1885C1H7R9DA01#

8.0pF ±0.05pF GRM1885C1H8R0WA01#

±0.1pF GRM1885C1H8R0BA01#

±0.25pF GRM1885C1H8R0CA01#

±0.5pF GRM1885C1H8R0DA01#

8.1pF ±0.05pF GRM1885C1H8R1WA01#

±0.1pF GRM1885C1H8R1BA01#

±0.25pF GRM1885C1H8R1CA01#

±0.5pF GRM1885C1H8R1DA01#

8.2pF ±0.05pF GRM1885C1H8R2WA01#

±0.1pF GRM1885C1H8R2BA01#

±0.25pF GRM1885C1H8R2CA01#

±0.5pF GRM1885C1H8R2DA01#

8.3pF ±0.05pF GRM1885C1H8R3WA01#

±0.1pF GRM1885C1H8R3BA01#

±0.25pF GRM1885C1H8R3CA01#

±0.5pF GRM1885C1H8R3DA01#

8.4pF ±0.05pF GRM1885C1H8R4WA01#

±0.1pF GRM1885C1H8R4BA01#

±0.25pF GRM1885C1H8R4CA01#

±0.5pF GRM1885C1H8R4DA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 8.5pF ±0.05pF GRM1885C1H8R5WA01#

±0.1pF GRM1885C1H8R5BA01#

±0.25pF GRM1885C1H8R5CA01#

±0.5pF GRM1885C1H8R5DA01#

8.6pF ±0.05pF GRM1885C1H8R6WA01#

±0.1pF GRM1885C1H8R6BA01#

±0.25pF GRM1885C1H8R6CA01#

±0.5pF GRM1885C1H8R6DA01#

8.7pF ±0.05pF GRM1885C1H8R7WA01#

±0.1pF GRM1885C1H8R7BA01#

±0.25pF GRM1885C1H8R7CA01#

±0.5pF GRM1885C1H8R7DA01#

8.8pF ±0.05pF GRM1885C1H8R8WA01#

±0.1pF GRM1885C1H8R8BA01#

±0.25pF GRM1885C1H8R8CA01#

±0.5pF GRM1885C1H8R8DA01#

8.9pF ±0.05pF GRM1885C1H8R9WA01#

±0.1pF GRM1885C1H8R9BA01#

±0.25pF GRM1885C1H8R9CA01#

±0.5pF GRM1885C1H8R9DA01#

9.0pF ±0.05pF GRM1885C1H9R0WA01#

±0.1pF GRM1885C1H9R0BA01#

±0.25pF GRM1885C1H9R0CA01#

±0.5pF GRM1885C1H9R0DA01#

9.1pF ±0.05pF GRM1885C1H9R1WA01#

±0.1pF GRM1885C1H9R1BA01#

±0.25pF GRM1885C1H9R1CA01#

±0.5pF GRM1885C1H9R1DA01#

9.2pF ±0.05pF GRM1885C1H9R2WA01#

±0.1pF GRM1885C1H9R2BA01#

±0.25pF GRM1885C1H9R2CA01#

±0.5pF GRM1885C1H9R2DA01#

9.3pF ±0.05pF GRM1885C1H9R3WA01#

±0.1pF GRM1885C1H9R3BA01#

±0.25pF GRM1885C1H9R3CA01#

±0.5pF GRM1885C1H9R3DA01#

9.4pF ±0.05pF GRM1885C1H9R4WA01#

±0.1pF GRM1885C1H9R4BA01#

±0.25pF GRM1885C1H9R4CA01#

±0.5pF GRM1885C1H9R4DA01#

9.5pF ±0.05pF GRM1885C1H9R5WA01#

±0.1pF GRM1885C1H9R5BA01#

±0.25pF GRM1885C1H9R5CA01#

±0.5pF GRM1885C1H9R5DA01#

9.6pF ±0.05pF GRM1885C1H9R6WA01#

±0.1pF GRM1885C1H9R6BA01#

±0.25pF GRM1885C1H9R6CA01#

±0.5pF GRM1885C1H9R6DA01#

9.7pF ±0.05pF GRM1885C1H9R7WA01#

±0.1pF GRM1885C1H9R7BA01#

±0.25pF GRM1885C1H9R7CA01#

±0.5pF GRM1885C1H9R7DA01#

9.8pF ±0.05pF GRM1885C1H9R8WA01#

±0.1pF GRM1885C1H9R8BA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 9.8pF ±0.25pF GRM1885C1H9R8CA01#

±0.5pF GRM1885C1H9R8DA01#

9.9pF ±0.05pF GRM1885C1H9R9WA01#

±0.1pF GRM1885C1H9R9BA01#

±0.25pF GRM1885C1H9R9CA01#

±0.5pF GRM1885C1H9R9DA01#

10pF ±5% GRM1885C1H100JA01#

12pF ±5% GRM1885C1H120JA01#

15pF ±5% GRM1885C1H150JA01#

18pF ±5% GRM1885C1H180JA01#

22pF ±5% GRM1885C1H220JA01#

27pF ±5% GRM1885C1H270JA01#

33pF ±5% GRM1885C1H330JA01#

39pF ±5% GRM1885C1H390JA01#

47pF ±5% GRM1885C1H470JA01#

56pF ±5% GRM1885C1H560JA01#

68pF ±5% GRM1885C1H680JA01#

82pF ±5% GRM1885C1H820JA01#

100pF ±5% GRM1885C1H101JA01#

120pF ±5% GRM1885C1H121JA01#

150pF ±5% GRM1885C1H151JA01#

180pF ±5% GRM1885C1H181JA01#

220pF ±5% GRM1885C1H221JA01#

270pF ±5% GRM1885C1H271JA01#

330pF ±5% GRM1885C1H331JA01#

390pF ±5% GRM1885C1H391JA01#

470pF ±5% GRM1885C1H471JA01#

560pF ±5% GRM1885C1H561JA01#

680pF ±5% GRM1885C1H681JA01#

820pF ±5% GRM1885C1H821JA01#

1000pF ±5% GRM1885C1H102JA01#

1200pF ±5% GRM1885C1H122JA01#

1500pF ±5% GRM1885C1H152JA01#

1800pF ±5% GRM1885C1H182JA01#

2200pF ±5% GRM1885C1H222JA01#

2700pF ±5% GRM1885C1H272JA01#

3300pF ±5% GRM1885C1H332JA01#

3900pF ±5% GRM1885C1H392JA01#

CK 0.5pF ±0.05pF GRM1884C1HR50WA01#

±0.1pF GRM1884C1HR50BA01#

0.6pF ±0.05pF GRM1884C1HR60WA01#

±0.1pF GRM1884C1HR60BA01#

0.7pF ±0.05pF GRM1884C1HR70WA01#

±0.1pF GRM1884C1HR70BA01#

0.8pF ±0.05pF GRM1884C1HR80WA01#

±0.1pF GRM1884C1HR80BA01#

0.9pF ±0.05pF GRM1884C1HR90WA01#

±0.1pF GRM1884C1HR90BA01#

1.0pF ±0.05pF GRM1884C1H1R0WA01#

±0.1pF GRM1884C1H1R0BA01#

±0.25pF GRM1884C1H1R0CA01#

1.1pF ±0.05pF GRM1884C1H1R1WA01#

±0.1pF GRM1884C1H1R1BA01#

±0.25pF GRM1884C1H1R1CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CK 1.2pF ±0.05pF GRM1884C1H1R2WA01#

±0.1pF GRM1884C1H1R2BA01#

±0.25pF GRM1884C1H1R2CA01#

1.3pF ±0.05pF GRM1884C1H1R3WA01#

±0.1pF GRM1884C1H1R3BA01#

±0.25pF GRM1884C1H1R3CA01#

1.4pF ±0.05pF GRM1884C1H1R4WA01#

±0.1pF GRM1884C1H1R4BA01#

±0.25pF GRM1884C1H1R4CA01#

1.5pF ±0.05pF GRM1884C1H1R5WA01#

±0.1pF GRM1884C1H1R5BA01#

±0.25pF GRM1884C1H1R5CA01#

1.6pF ±0.05pF GRM1884C1H1R6WA01#

±0.1pF GRM1884C1H1R6BA01#

±0.25pF GRM1884C1H1R6CA01#

1.7pF ±0.05pF GRM1884C1H1R7WA01#

±0.1pF GRM1884C1H1R7BA01#

±0.25pF GRM1884C1H1R7CA01#

1.8pF ±0.05pF GRM1884C1H1R8WA01#

±0.1pF GRM1884C1H1R8BA01#

±0.25pF GRM1884C1H1R8CA01#

1.9pF ±0.05pF GRM1884C1H1R9WA01#

±0.1pF GRM1884C1H1R9BA01#

±0.25pF GRM1884C1H1R9CA01#

2.0pF ±0.05pF GRM1884C1H2R0WA01#

±0.1pF GRM1884C1H2R0BA01#

±0.25pF GRM1884C1H2R0CA01#

CJ 2.1pF ±0.05pF GRM1883C1H2R1WA01#

±0.1pF GRM1883C1H2R1BA01#

±0.25pF GRM1883C1H2R1CA01#

2.2pF ±0.05pF GRM1883C1H2R2WA01#

±0.1pF GRM1883C1H2R2BA01#

±0.25pF GRM1883C1H2R2CA01#

2.3pF ±0.05pF GRM1883C1H2R3WA01#

±0.1pF GRM1883C1H2R3BA01#

±0.25pF GRM1883C1H2R3CA01#

2.4pF ±0.05pF GRM1883C1H2R4WA01#

±0.1pF GRM1883C1H2R4BA01#

±0.25pF GRM1883C1H2R4CA01#

2.5pF ±0.05pF GRM1883C1H2R5WA01#

±0.1pF GRM1883C1H2R5BA01#

±0.25pF GRM1883C1H2R5CA01#

2.6pF ±0.05pF GRM1883C1H2R6WA01#

±0.1pF GRM1883C1H2R6BA01#

±0.25pF GRM1883C1H2R6CA01#

2.7pF ±0.05pF GRM1883C1H2R7WA01#

±0.1pF GRM1883C1H2R7BA01#

±0.25pF GRM1883C1H2R7CA01#

2.8pF ±0.05pF GRM1883C1H2R8WA01#

±0.1pF GRM1883C1H2R8BA01#

±0.25pF GRM1883C1H2R8CA01#

2.9pF ±0.05pF GRM1883C1H2R9WA01#

±0.1pF GRM1883C1H2R9BA01#

±0.25pF GRM1883C1H2R9CA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CJ 3.0pF ±0.05pF GRM1883C1H3R0WA01#

±0.1pF GRM1883C1H3R0BA01#

±0.25pF GRM1883C1H3R0CA01#

3.1pF ±0.05pF GRM1883C1H3R1WA01#

±0.1pF GRM1883C1H3R1BA01#

±0.25pF GRM1883C1H3R1CA01#

3.2pF ±0.05pF GRM1883C1H3R2WA01#

±0.1pF GRM1883C1H3R2BA01#

±0.25pF GRM1883C1H3R2CA01#

3.3pF ±0.05pF GRM1883C1H3R3WA01#

±0.1pF GRM1883C1H3R3BA01#

±0.25pF GRM1883C1H3R3CA01#

3.4pF ±0.05pF GRM1883C1H3R4WA01#

±0.1pF GRM1883C1H3R4BA01#

±0.25pF GRM1883C1H3R4CA01#

3.5pF ±0.05pF GRM1883C1H3R5WA01#

±0.1pF GRM1883C1H3R5BA01#

±0.25pF GRM1883C1H3R5CA01#

3.6pF ±0.05pF GRM1883C1H3R6WA01#

±0.1pF GRM1883C1H3R6BA01#

±0.25pF GRM1883C1H3R6CA01#

3.7pF ±0.05pF GRM1883C1H3R7WA01#

±0.1pF GRM1883C1H3R7BA01#

±0.25pF GRM1883C1H3R7CA01#

3.8pF ±0.05pF GRM1883C1H3R8WA01#

±0.1pF GRM1883C1H3R8BA01#

±0.25pF GRM1883C1H3R8CA01#

3.9pF ±0.05pF GRM1883C1H3R9WA01#

±0.1pF GRM1883C1H3R9BA01#

±0.25pF GRM1883C1H3R9CA01#

CH 4.0pF ±0.05pF GRM1882C1H4R0WA01#

±0.1pF GRM1882C1H4R0BA01#

±0.25pF GRM1882C1H4R0CA01#

4.1pF ±0.05pF GRM1882C1H4R1WA01#

±0.1pF GRM1882C1H4R1BA01#

±0.25pF GRM1882C1H4R1CA01#

4.2pF ±0.05pF GRM1882C1H4R2WA01#

±0.1pF GRM1882C1H4R2BA01#

±0.25pF GRM1882C1H4R2CA01#

4.3pF ±0.05pF GRM1882C1H4R3WA01#

±0.1pF GRM1882C1H4R3BA01#

±0.25pF GRM1882C1H4R3CA01#

4.4pF ±0.05pF GRM1882C1H4R4WA01#

±0.1pF GRM1882C1H4R4BA01#

±0.25pF GRM1882C1H4R4CA01#

4.5pF ±0.05pF GRM1882C1H4R5WA01#

±0.1pF GRM1882C1H4R5BA01#

±0.25pF GRM1882C1H4R5CA01#

4.6pF ±0.05pF GRM1882C1H4R6WA01#

±0.1pF GRM1882C1H4R6BA01#

±0.25pF GRM1882C1H4R6CA01#

4.7pF ±0.05pF GRM1882C1H4R7WA01#

±0.1pF GRM1882C1H4R7BA01#

±0.25pF GRM1882C1H4R7CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CH 4.8pF ±0.05pF GRM1882C1H4R8WA01#

±0.1pF GRM1882C1H4R8BA01#

±0.25pF GRM1882C1H4R8CA01#

4.9pF ±0.05pF GRM1882C1H4R9WA01#

±0.1pF GRM1882C1H4R9BA01#

±0.25pF GRM1882C1H4R9CA01#

5.0pF ±0.05pF GRM1882C1H5R0WA01#

±0.1pF GRM1882C1H5R0BA01#

±0.25pF GRM1882C1H5R0CA01#

5.1pF ±0.05pF GRM1882C1H5R1WA01#

±0.1pF GRM1882C1H5R1BA01#

±0.25pF GRM1882C1H5R1CA01#

±0.5pF GRM1882C1H5R1DA01#

5.2pF ±0.05pF GRM1882C1H5R2WA01#

±0.1pF GRM1882C1H5R2BA01#

±0.25pF GRM1882C1H5R2CA01#

±0.5pF GRM1882C1H5R2DA01#

5.3pF ±0.05pF GRM1882C1H5R3WA01#

±0.1pF GRM1882C1H5R3BA01#

±0.25pF GRM1882C1H5R3CA01#

±0.5pF GRM1882C1H5R3DA01#

5.4pF ±0.05pF GRM1882C1H5R4WA01#

±0.1pF GRM1882C1H5R4BA01#

±0.25pF GRM1882C1H5R4CA01#

±0.5pF GRM1882C1H5R4DA01#

5.5pF ±0.05pF GRM1882C1H5R5WA01#

±0.1pF GRM1882C1H5R5BA01#

±0.25pF GRM1882C1H5R5CA01#

±0.5pF GRM1882C1H5R5DA01#

5.6pF ±0.05pF GRM1882C1H5R6WA01#

±0.1pF GRM1882C1H5R6BA01#

±0.25pF GRM1882C1H5R6CA01#

±0.5pF GRM1882C1H5R6DA01#

5.7pF ±0.05pF GRM1882C1H5R7WA01#

±0.1pF GRM1882C1H5R7BA01#

±0.25pF GRM1882C1H5R7CA01#

±0.5pF GRM1882C1H5R7DA01#

5.8pF ±0.05pF GRM1882C1H5R8WA01#

±0.1pF GRM1882C1H5R8BA01#

±0.25pF GRM1882C1H5R8CA01#

±0.5pF GRM1882C1H5R8DA01#

5.9pF ±0.05pF GRM1882C1H5R9WA01#

±0.1pF GRM1882C1H5R9BA01#

±0.25pF GRM1882C1H5R9CA01#

±0.5pF GRM1882C1H5R9DA01#

6.0pF ±0.05pF GRM1882C1H6R0WA01#

±0.1pF GRM1882C1H6R0BA01#

±0.25pF GRM1882C1H6R0CA01#

±0.5pF GRM1882C1H6R0DA01#

6.1pF ±0.05pF GRM1882C1H6R1WA01#

±0.1pF GRM1882C1H6R1BA01#

±0.25pF GRM1882C1H6R1CA01#

±0.5pF GRM1882C1H6R1DA01#

6.2pF ±0.05pF GRM1882C1H6R2WA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CH 6.2pF ±0.1pF GRM1882C1H6R2BA01#

±0.25pF GRM1882C1H6R2CA01#

±0.5pF GRM1882C1H6R2DA01#

6.3pF ±0.05pF GRM1882C1H6R3WA01#

±0.1pF GRM1882C1H6R3BA01#

±0.25pF GRM1882C1H6R3CA01#

±0.5pF GRM1882C1H6R3DA01#

6.4pF ±0.05pF GRM1882C1H6R4WA01#

±0.1pF GRM1882C1H6R4BA01#

±0.25pF GRM1882C1H6R4CA01#

±0.5pF GRM1882C1H6R4DA01#

6.5pF ±0.05pF GRM1882C1H6R5WA01#

±0.1pF GRM1882C1H6R5BA01#

±0.25pF GRM1882C1H6R5CA01#

±0.5pF GRM1882C1H6R5DA01#

6.6pF ±0.05pF GRM1882C1H6R6WA01#

±0.1pF GRM1882C1H6R6BA01#

±0.25pF GRM1882C1H6R6CA01#

±0.5pF GRM1882C1H6R6DA01#

6.7pF ±0.05pF GRM1882C1H6R7WA01#

±0.1pF GRM1882C1H6R7BA01#

±0.25pF GRM1882C1H6R7CA01#

±0.5pF GRM1882C1H6R7DA01#

6.8pF ±0.05pF GRM1882C1H6R8WA01#

±0.1pF GRM1882C1H6R8BA01#

±0.25pF GRM1882C1H6R8CA01#

±0.5pF GRM1882C1H6R8DA01#

6.9pF ±0.05pF GRM1882C1H6R9WA01#

±0.1pF GRM1882C1H6R9BA01#

±0.25pF GRM1882C1H6R9CA01#

±0.5pF GRM1882C1H6R9DA01#

7.0pF ±0.05pF GRM1882C1H7R0WA01#

±0.1pF GRM1882C1H7R0BA01#

±0.25pF GRM1882C1H7R0CA01#

±0.5pF GRM1882C1H7R0DA01#

7.1pF ±0.05pF GRM1882C1H7R1WA01#

±0.1pF GRM1882C1H7R1BA01#

±0.25pF GRM1882C1H7R1CA01#

±0.5pF GRM1882C1H7R1DA01#

7.2pF ±0.05pF GRM1882C1H7R2WA01#

±0.1pF GRM1882C1H7R2BA01#

±0.25pF GRM1882C1H7R2CA01#

±0.5pF GRM1882C1H7R2DA01#

7.3pF ±0.05pF GRM1882C1H7R3WA01#

±0.1pF GRM1882C1H7R3BA01#

±0.25pF GRM1882C1H7R3CA01#

±0.5pF GRM1882C1H7R3DA01#

7.4pF ±0.05pF GRM1882C1H7R4WA01#

±0.1pF GRM1882C1H7R4BA01#

±0.25pF GRM1882C1H7R4CA01#

±0.5pF GRM1882C1H7R4DA01#

7.5pF ±0.05pF GRM1882C1H7R5WA01#

±0.1pF GRM1882C1H7R5BA01#

±0.25pF GRM1882C1H7R5CA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CH 7.5pF ±0.5pF GRM1882C1H7R5DA01#

7.6pF ±0.05pF GRM1882C1H7R6WA01#

±0.1pF GRM1882C1H7R6BA01#

±0.25pF GRM1882C1H7R6CA01#

±0.5pF GRM1882C1H7R6DA01#

7.7pF ±0.05pF GRM1882C1H7R7WA01#

±0.1pF GRM1882C1H7R7BA01#

±0.25pF GRM1882C1H7R7CA01#

±0.5pF GRM1882C1H7R7DA01#

7.8pF ±0.05pF GRM1882C1H7R8WA01#

±0.1pF GRM1882C1H7R8BA01#

±0.25pF GRM1882C1H7R8CA01#

±0.5pF GRM1882C1H7R8DA01#

7.9pF ±0.05pF GRM1882C1H7R9WA01#

±0.1pF GRM1882C1H7R9BA01#

±0.25pF GRM1882C1H7R9CA01#

±0.5pF GRM1882C1H7R9DA01#

8.0pF ±0.05pF GRM1882C1H8R0WA01#

±0.1pF GRM1882C1H8R0BA01#

±0.25pF GRM1882C1H8R0CA01#

±0.5pF GRM1882C1H8R0DA01#

8.1pF ±0.05pF GRM1882C1H8R1WA01#

±0.1pF GRM1882C1H8R1BA01#

±0.25pF GRM1882C1H8R1CA01#

±0.5pF GRM1882C1H8R1DA01#

8.2pF ±0.05pF GRM1882C1H8R2WA01#

±0.1pF GRM1882C1H8R2BA01#

±0.25pF GRM1882C1H8R2CA01#

±0.5pF GRM1882C1H8R2DA01#

8.3pF ±0.05pF GRM1882C1H8R3WA01#

±0.1pF GRM1882C1H8R3BA01#

±0.25pF GRM1882C1H8R3CA01#

±0.5pF GRM1882C1H8R3DA01#

8.4pF ±0.05pF GRM1882C1H8R4WA01#

±0.1pF GRM1882C1H8R4BA01#

±0.25pF GRM1882C1H8R4CA01#

±0.5pF GRM1882C1H8R4DA01#

8.5pF ±0.05pF GRM1882C1H8R5WA01#

±0.1pF GRM1882C1H8R5BA01#

±0.25pF GRM1882C1H8R5CA01#

±0.5pF GRM1882C1H8R5DA01#

8.6pF ±0.05pF GRM1882C1H8R6WA01#

±0.1pF GRM1882C1H8R6BA01#

±0.25pF GRM1882C1H8R6CA01#

±0.5pF GRM1882C1H8R6DA01#

8.7pF ±0.05pF GRM1882C1H8R7WA01#

±0.1pF GRM1882C1H8R7BA01#

±0.25pF GRM1882C1H8R7CA01#

±0.5pF GRM1882C1H8R7DA01#

8.8pF ±0.05pF GRM1882C1H8R8WA01#

±0.1pF GRM1882C1H8R8BA01#

±0.25pF GRM1882C1H8R8CA01#

±0.5pF GRM1882C1H8R8DA01#

8.9pF ±0.05pF GRM1882C1H8R9WA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CH 8.9pF ±0.1pF GRM1882C1H8R9BA01#

±0.25pF GRM1882C1H8R9CA01#

±0.5pF GRM1882C1H8R9DA01#

9.0pF ±0.05pF GRM1882C1H9R0WA01#

±0.1pF GRM1882C1H9R0BA01#

±0.25pF GRM1882C1H9R0CA01#

±0.5pF GRM1882C1H9R0DA01#

9.1pF ±0.05pF GRM1882C1H9R1WA01#

±0.1pF GRM1882C1H9R1BA01#

±0.25pF GRM1882C1H9R1CA01#

±0.5pF GRM1882C1H9R1DA01#

9.2pF ±0.05pF GRM1882C1H9R2WA01#

±0.1pF GRM1882C1H9R2BA01#

±0.25pF GRM1882C1H9R2CA01#

±0.5pF GRM1882C1H9R2DA01#

9.3pF ±0.05pF GRM1882C1H9R3WA01#

±0.1pF GRM1882C1H9R3BA01#

±0.25pF GRM1882C1H9R3CA01#

±0.5pF GRM1882C1H9R3DA01#

9.4pF ±0.05pF GRM1882C1H9R4WA01#

±0.1pF GRM1882C1H9R4BA01#

±0.25pF GRM1882C1H9R4CA01#

±0.5pF GRM1882C1H9R4DA01#

9.5pF ±0.05pF GRM1882C1H9R5WA01#

±0.1pF GRM1882C1H9R5BA01#

±0.25pF GRM1882C1H9R5CA01#

±0.5pF GRM1882C1H9R5DA01#

9.6pF ±0.05pF GRM1882C1H9R6WA01#

±0.1pF GRM1882C1H9R6BA01#

±0.25pF GRM1882C1H9R6CA01#

±0.5pF GRM1882C1H9R6DA01#

9.7pF ±0.05pF GRM1882C1H9R7WA01#

±0.1pF GRM1882C1H9R7BA01#

±0.25pF GRM1882C1H9R7CA01#

±0.5pF GRM1882C1H9R7DA01#

9.8pF ±0.05pF GRM1882C1H9R8WA01#

±0.1pF GRM1882C1H9R8BA01#

±0.25pF GRM1882C1H9R8CA01#

±0.5pF GRM1882C1H9R8DA01#

9.9pF ±0.05pF GRM1882C1H9R9WA01#

±0.1pF GRM1882C1H9R9BA01#

±0.25pF GRM1882C1H9R9CA01#

±0.5pF GRM1882C1H9R9DA01#

10pF ±5% GRM1882C1H100JA01#

12pF ±5% GRM1882C1H120JA01#

15pF ±5% GRM1882C1H150JA01#

18pF ±5% GRM1882C1H180JA01#

22pF ±5% GRM1882C1H220JA01#

27pF ±5% GRM1882C1H270JA01#

33pF ±5% GRM1882C1H330JA01#

39pF ±5% GRM1882C1H390JA01#

47pF ±5% GRM1882C1H470JA01#

56pF ±5% GRM1882C1H560JA01#

68pF ±5% GRM1882C1H680JA01#

GRM Series Temperature Compensating Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CH 82pF ±5% GRM1882C1H820JA01#

100pF ±5% GRM1882C1H101JA01#

120pF ±5% GRM1882C1H121JA01#

150pF ±5% GRM1882C1H151JA01#

180pF ±5% GRM1882C1H181JA01#

220pF ±5% GRM1882C1H221JA01#

270pF ±5% GRM1882C1H271JA01#

330pF ±5% GRM1882C1H331JA01#

390pF ±5% GRM1882C1H391JA01#

470pF ±5% GRM1882C1H471JA01#

560pF ±5% GRM1882C1H561JA01#

680pF ±5% GRM1882C1H681JA01#

820pF ±5% GRM1882C1H821JA01#

1000pF ±5% GRM1882C1H102JA01#

1200pF ±5% GRM1882C1H122JA01#

1500pF ±5% GRM1882C1H152JA01#

1800pF ±5% GRM1882C1H182JA01#

2200pF ±5% GRM1882C1H222JA01#

2700pF ±5% GRM1882C1H272JA01#

3300pF ±5% GRM1882C1H332JA01#

3900pF ±5% GRM1882C1H392JA01#

SL 1200pF ±5% GRM1881X1H122JA01#

1500pF ±5% GRM1881X1H152JA01#

1800pF ±5% GRM1881X1H182JA01#

2200pF ±5% GRM1881X1H222JA01#

2700pF ±5% GRM1881X1H272JA01#

3300pF ±5% GRM1881X1H332JA01#

3900pF ±5% GRM1881X1H392JA01#

4700pF ±5% GRM1881X1H472JA01#

5600pF ±5% GRM1881X1H562JA01#

6800pF ±5% GRM1881X1H682JA01#

8200pF ±5% GRM1881X1H822JA01#

10000pF ±5% GRM1881X1H103JA01#

U2J 1200pF ±5% GRM1887U1H122JA01#

1500pF ±5% GRM1887U1H152JA01#

1800pF ±5% GRM1887U1H182JA01#

2200pF ±5% GRM1887U1H222JA01#

2700pF ±5% GRM1887U1H272JA01#

3300pF ±5% GRM1887U1H332JA01#

3900pF ±5% GRM1887U1H392JA01#

4700pF ±5% GRM1887U1H472JA01#

5600pF ±5% GRM1887U1H562JA01#

6800pF ±5% GRM1887U1H682JA01#

8200pF ±5% GRM1887U1H822JA01#

10000pF ±5% GRM1887U1H103JA01#

UJ 1000pF ±5% GRM1883U1H102JA01#

1200pF ±5% GRM1883U1H122JA01#

1500pF ±5% GRM1883U1H152JA01#

1800pF ±5% GRM1883U1H182JA01#

2200pF ±5% GRM1883U1H222JA01#

2700pF ±5% GRM1883U1H272JA01#

3300pF ±5% GRM1883U1H332JA01#

3900pF ±5% GRM1883U1H392JA01#

4700pF ±5% GRM1883U1H472JA01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc UJ 5600pF ±5% GRM1883U1H562JA01#

6800pF ±5% GRM1883U1H682JA01#

8200pF ±5% GRM1883U1H822JA01#

10000pF ±5% GRM1883U1H103JA01#

10Vdc SL 12000pF ±5% GRM1881X1A123JA01#

15000pF ±5% GRM1881X1A153JA01#

18000pF ±5% GRM1881X1A183JA01#

22000pF ±5% GRM1881X1A223JA01#

U2J 12000pF ±5% GRM1887U1A123JA01#

15000pF ±5% GRM1887U1A153JA01#

18000pF ±5% GRM1887U1A183JA01#

22000pF ±5% GRM1887U1A223JA01#

UJ 12000pF ±5% GRM1883U1A123JA01#

15000pF ±5% GRM1883U1A153JA01#

18000pF ±5% GRM1883U1A183JA01#

22000pF ±5% GRM1883U1A223JA01#

GRM Series Temperature Compensating Type Part Number List

c 2.0×1.25mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.7mm 100Vdc C0G 100pF ±5% GRM2165C2A101JA01#

120pF ±5% GRM2165C2A121JA01#

150pF ±5% GRM2165C2A151JA01#

180pF ±5% GRM2165C2A181JA01#

220pF ±5% GRM2165C2A221JA01#

270pF ±5% GRM2165C2A271JA01#

330pF ±5% GRM2165C2A331JA01#

390pF ±5% GRM2165C2A391JA01#

470pF ±5% GRM2165C2A471JA01#

560pF ±5% GRM2165C2A561JA01#

680pF ±5% GRM2165C2A681JA01#

820pF ±5% GRM2165C2A821JA01#

1000pF ±5% GRM2165C2A102JA01#

1200pF ±5% GRM2165C2A122JA01#

1500pF ±5% GRM2165C2A152JA01#

1800pF ±5% GRM2165C2A182JA01#

2200pF ±5% GRM2165C2A222JA01#

2700pF ±5% GRM2165C2A272JA01#

3300pF ±5% GRM2165C2A332JA01#

CH 100pF ±5% GRM2162C2A101JA01#

120pF ±5% GRM2162C2A121JA01#

150pF ±5% GRM2162C2A151JA01#

180pF ±5% GRM2162C2A181JA01#

220pF ±5% GRM2162C2A221JA01#

270pF ±5% GRM2162C2A271JA01#

330pF ±5% GRM2162C2A331JA01#

390pF ±5% GRM2162C2A391JA01#

470pF ±5% GRM2162C2A471JA01#

560pF ±5% GRM2162C2A561JA01#

680pF ±5% GRM2162C2A681JA01#

820pF ±5% GRM2162C2A821JA01#

1000pF ±5% GRM2162C2A102JA01#

1200pF ±5% GRM2162C2A122JA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.7mm 100Vdc CH 1500pF ±5% GRM2162C2A152JA01#

1800pF ±5% GRM2162C2A182JA01#

2200pF ±5% GRM2162C2A222JA01#

2700pF ±5% GRM2162C2A272JA01#

3300pF ±5% GRM2162C2A332JA01#

50Vdc C0G 1200pF ±5% GRM2165C1H122JA01#

1500pF ±5% GRM2165C1H152JA01#

1800pF ±5% GRM2165C1H182JA01#

2200pF ±5% GRM2165C1H222JA01#

2700pF ±5% GRM2165C1H272JA01#

3300pF ±5% GRM2165C1H332JA01#

3900pF ±5% GRM2165C1H392JA01#

4700pF ±5% GRM2165C1H472JA01#

CH 1200pF ±5% GRM2162C1H122JA01#

1500pF ±5% GRM2162C1H152JA01#

1800pF ±5% GRM2162C1H182JA01#

2200pF ±5% GRM2162C1H222JA01#

2700pF ±5% GRM2162C1H272JA01#

3300pF ±5% GRM2162C1H332JA01#

3900pF ±5% GRM2162C1H392JA01#

4700pF ±5% GRM2162C1H472JA01#

SL 12000pF ±5% GRM2161X1H123JA01#

15000pF ±5% GRM2161X1H153JA01#

18000pF ±5% GRM2161X1H183JA01#

U2J 12000pF ±5% GRM2167U1H123JA01#

15000pF ±5% GRM2167U1H153JA01#

18000pF ±5% GRM2167U1H183JA01#

UJ 10000pF ±5% GRM2163U1H103JA01#

12000pF ±5% GRM2163U1H123JA01#

15000pF ±5% GRM2163U1H153JA01#

18000pF ±5% GRM2163U1H183JA01#

0.95mm 50Vdc C0G 5600pF ±5% GRM2195C1H562JA01#

6800pF ±5% GRM2195C1H682JA01#

8200pF ±5% GRM2195C1H822JA01#

10000pF ±5% GRM2195C1H103JA01#

12000pF ±5% GRM2195C1H123JA01#

15000pF ±5% GRM2195C1H153JA01#

CH 5600pF ±5% GRM2192C1H562JA01#

6800pF ±5% GRM2192C1H682JA01#

8200pF ±5% GRM2192C1H822JA01#

10000pF ±5% GRM2192C1H103JA01#

12000pF ±5% GRM2192C1H123JA01#

15000pF ±5% GRM2192C1H153JA01#

SL 22000pF ±5% GRM2191X1H223JA01#

27000pF ±5% GRM2191X1H273JA01#

U2J 22000pF ±5% GRM2197U1H223JA01#

27000pF ±5% GRM2197U1H273JA01#

UJ 22000pF ±5% GRM2193U1H223JA01#

27000pF ±5% GRM2193U1H273JA01#

10Vdc SL 56000pF ±5% GRM2191X1A563JA01#

U2J 56000pF ±5% GRM2197U1A563JA01#

UJ 56000pF ±5% GRM2193U1A563JA01#

1mm 50Vdc SL 33000pF ±5% GRM21A1X1H333JA39#

U2J 33000pF ±5% GRM21A7U1H333JA39#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

1mm 50Vdc UJ 33000pF ±5% GRM21A3U1H333JA39#

1.35mm 50Vdc C0G 18000pF ±5% GRM21B5C1H183JA01#

22000pF ±5% GRM21B5C1H223JA01#

CH 18000pF ±5% GRM21B2C1H183JA01#

22000pF ±5% GRM21B2C1H223JA01#

SL 39000pF ±5% GRM21B1X1H393JA01#

47000pF ±5% GRM21B1X1H473JA01#

U2J 39000pF ±5% GRM21B7U1H393JA01#

47000pF ±5% GRM21B7U1H473JA01#

UJ 39000pF ±5% GRM21B3U1H393JA01#

47000pF ±5% GRM21B3U1H473JA01#

10Vdc SL 68000pF ±5% GRM21B1X1A683JA01#

82000pF ±5% GRM21B1X1A823JA01#

0.1µF ±5% GRM21B1X1A104JA01#

U2J 68000pF ±5% GRM21B7U1A683JA01#

82000pF ±5% GRM21B7U1A823JA01#

0.1µF ±5% GRM21B7U1A104JA01#

UJ 68000pF ±5% GRM21B3U1A683JA01#

82000pF ±5% GRM21B3U1A823JA01#

0.1µF ±5% GRM21B3U1A104JA01#

GRM Series Temperature Compensating Type Part Number List

c 3.2×1.6mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 100Vdc C0G 1800pF ±5% GRM3195C2A182JA01#

2200pF ±5% GRM3195C2A222JA01#

2700pF ±5% GRM3195C2A272JA01#

3300pF ±5% GRM3195C2A332JA01#

3900pF ±5% GRM3195C2A392JA01#

4700pF ±5% GRM3195C2A472JA01#

5600pF ±5% GRM3195C2A562JA01#

6800pF ±5% GRM3195C2A682JA01#

8200pF ±5% GRM3195C2A822JA01#

10000pF ±5% GRM3195C2A103JA01#

12000pF ±5% GRM3195C2A123JA01#

15000pF ±5% GRM3195C2A153JA01#

18000pF ±5% GRM3195C2A183JA01#

22000pF ±5% GRM3195C2A223JA01#

CH 1800pF ±5% GRM3192C2A182JA01#

2200pF ±5% GRM3192C2A222JA01#

2700pF ±5% GRM3192C2A272JA01#

3300pF ±5% GRM3192C2A332JA01#

3900pF ±5% GRM3192C2A392JA01#

4700pF ±5% GRM3192C2A472JA01#

5600pF ±5% GRM3192C2A562JA01#

6800pF ±5% GRM3192C2A682JA01#

8200pF ±5% GRM3192C2A822JA01#

10000pF ±5% GRM3192C2A103JA01#

12000pF ±5% GRM3192C2A123JA01#

15000pF ±5% GRM3192C2A153JA01#

18000pF ±5% GRM3192C2A183JA01#

22000pF ±5% GRM3192C2A223JA01#

50Vdc C0G 12000pF ±5% GRM3195C1H123JA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 50Vdc C0G 15000pF ±5% GRM3195C1H153JA01#

18000pF ±5% GRM3195C1H183JA01#

22000pF ±5% GRM3195C1H223JA01#

27000pF ±5% GRM3195C1H273JA01#

33000pF ±5% GRM3195C1H333JA01#

39000pF ±5% GRM3195C1H393JA01#

CH 12000pF ±5% GRM3192C1H123JA01#

15000pF ±5% GRM3192C1H153JA01#

18000pF ±5% GRM3192C1H183JA01#

22000pF ±5% GRM3192C1H223JA01#

27000pF ±5% GRM3192C1H273JA01#

33000pF ±5% GRM3192C1H333JA01#

39000pF ±5% GRM3192C1H393JA01#

SL 56000pF ±5% GRM3191X1H563JA01#

U2J 56000pF ±5% GRM3197U1H563JA01#

UJ 56000pF ±5% GRM3193U1H563JA01#

1.25mm 50Vdc C0G 47000pF ±5% GRM31M5C1H473JA01#

56000pF ±5% GRM31M5C1H563JA01#

CH 47000pF ±5% GRM31M2C1H473JA01#

56000pF ±5% GRM31M2C1H563JA01#

SL 68000pF ±5% GRM31M1X1H683JA01#

82000pF ±5% GRM31M1X1H823JA01#

0.1µF ±5% GRM31M1X1H104JA01#

U2J 68000pF ±5% GRM31M7U1H683JA01#

82000pF ±5% GRM31M7U1H823JA01#

0.1µF ±5% GRM31M7U1H104JA01#

UJ 68000pF ±5% GRM31M3U1H683JA01#

82000pF ±5% GRM31M3U1H823JA01#

0.1µF ±5% GRM31M3U1H104JA01#

1.8mm 50Vdc C0G 68000pF ±5% GRM31C5C1H683JA01#

82000pF ±5% GRM31C5C1H823JA01#

0.1µF ±5% GRM31C5C1H104JA01#

CH 68000pF ±5% GRM31C2C1H683JA01#

82000pF ±5% GRM31C2C1H823JA01#

0.1µF ±5% GRM31C2C1H104JA01#

(→ c 2.0×1.25mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GRM Series High Dielectric Constant Type Part Number List

c 0.4×0.2mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 10Vdc X7R 68pF ±10% GRM022R71A680KA01#

±20% GRM022R71A680MA01#

100pF ±10% GRM022R71A101KA01#

±20% GRM022R71A101MA01#

150pF ±10% GRM022R71A151KA01#

±20% GRM022R71A151MA01#

220pF ±10% GRM022R71A221KA01#

±20% GRM022R71A221MA01#

330pF ±10% GRM022R71A331KA01#

±20% GRM022R71A331MA01#

470pF ±10% GRM022R71A471KA01#

±20% GRM022R71A471MA01#

X5R 68pF ±10% GRM022R61A680KA01#

±20% GRM022R61A680MA01#

100pF ±10% GRM022R61A101KA01#

±20% GRM022R61A101MA01#

150pF ±10% GRM022R61A151KA01#

±20% GRM022R61A151MA01#

220pF ±10% GRM022R61A221KA01#

±20% GRM022R61A221MA01#

330pF ±10% GRM022R61A331KA01#

±20% GRM022R61A331MA01#

470pF ±10% GRM022R61A471KA01#

±20% GRM022R61A471MA01#

680pF ±10% GRM022R61A681KE19#

±20% GRM022R61A681ME19#

1000pF ±10% GRM022R61A102KE19#

±20% GRM022R61A102ME19#

1500pF ±10% GRM022R61A152KE19#

±20% GRM022R61A152ME19#

2200pF ±10% GRM022R61A222KE19#

±20% GRM022R61A222ME19#

3300pF ±10% GRM022R61A332KE19#

±20% GRM022R61A332ME19#

4700pF ±10% GRM022R61A472KE19#

±20% GRM022R61A472ME19#

6800pF ±10% GRM022R61A682KE19#

±20% GRM022R61A682ME19#

10000pF ±10% GRM022R61A103KE19#

±20% GRM022R61A103ME19#

B 68pF ±10% GRM022B11A680KA01#

±20% GRM022B11A680MA01#

100pF ±10% GRM022B11A101KA01#

±20% GRM022B11A101MA01#

150pF ±10% GRM022B11A151KA01#

±20% GRM022B11A151MA01#

220pF ±10% GRM022B11A221KA01#

±20% GRM022B11A221MA01#

330pF ±10% GRM022B11A331KA01#

±20% GRM022B11A331MA01#

470pF ±10% GRM022B11A471KA01#

±20% GRM022B11A471MA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 10Vdc B 680pF ±10% GRM022B31A681KE19#

±20% GRM022B31A681ME19#

1000pF ±10% GRM022B31A102KE19#

±20% GRM022B31A102ME19#

1500pF ±10% GRM022B31A152KE19#

±20% GRM022B31A152ME19#

2200pF ±10% GRM022B31A222KE19#

±20% GRM022B31A222ME19#

3300pF ±10% GRM022B31A332KE19#

±20% GRM022B31A332ME19#

4700pF ±10% GRM022B31A472KE19#

±20% GRM022B31A472ME19#

6800pF ±10% GRM022B31A682KE19#

±20% GRM022B31A682ME19#

10000pF ±10% GRM022B31A103KE19#

±20% GRM022B31A103ME19#

6.3Vdc X5R 680pF ±20% GRM022R60J681ME19#

1000pF ±20% GRM022R60J102ME19#

1500pF ±20% GRM022R60J152ME19#

2200pF ±20% GRM022R60J222ME19#

3300pF ±20% GRM022R60J332ME19#

4700pF ±20% GRM022R60J472ME19#

6800pF ±20% GRM022R60J682ME19#

10000pF ±20% GRM022R60J103ME19#

15000pF ±20% GRM022R60J153ME15#

Derating

22000pF ±10% GRM022R60J223KE15#

Derating

±20% GRM022R60J223ME15#

Derating

33000pF ±20% GRM022R60J333ME15#

Derating

47000pF ±20% GRM022R60J473ME15#

Derating

68000pF ±20% GRM022R60J683ME15#

Derating

0.1µF ±20% GRM022R60J104ME15#

Derating

B 680pF ±20% GRM022B30J681ME19#

1000pF ±20% GRM022B30J102ME19#

1500pF ±20% GRM022B30J152ME19#

2200pF ±20% GRM022B30J222ME19#

3300pF ±20% GRM022B30J332ME19#

4700pF ±20% GRM022B30J472ME19#

6800pF ±20% GRM022B30J682ME19#

10000pF ±20% GRM022B30J103ME19#

4Vdc X5R 15000pF ±10% GRM022R60G153KE15#

±20% GRM022R60G153ME15#

22000pF ±10% GRM022R60G223KE15#

±20% GRM022R60G223ME15#

33000pF ±10% GRM022R60G333KE15#

±20% GRM022R60G333ME15#

47000pF ±10% GRM022R60G473KE15#

±20% GRM022R60G473ME15#

68000pF ±20% GRM022R60G683ME15#

0.1µF ±20% GRM022R60G104ME15#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GRM Series High Dielectric Constant Type Part Number List

c 0.6×0.3mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 50Vdc X7R 100pF ±10% GRM033R71H101KA12#

±20% GRM033R71H101MA12#

150pF ±10% GRM033R71H151KA12#

±20% GRM033R71H151MA12#

220pF ±10% GRM033R71H221KA12#

±20% GRM033R71H221MA12#

330pF ±10% GRM033R71H331KA12#

±20% GRM033R71H331MA12#

470pF ±10% GRM033R71H471KA12#

±20% GRM033R71H471MA12#

680pF ±10% GRM033R71H681KA12#

±20% GRM033R71H681MA12#

1000pF ±10% GRM033R71H102KA12#

±20% GRM033R71H102MA12#

1500pF ±10% GRM033R71H152KA12#

±20% GRM033R71H152MA12#

B 100pF ±10% GRM033B31H101KA12#

±20% GRM033B31H101MA12#

150pF ±10% GRM033B31H151KA12#

±20% GRM033B31H151MA12#

220pF ±10% GRM033B31H221KA12#

±20% GRM033B31H221MA12#

330pF ±10% GRM033B31H331KA12#

±20% GRM033B31H331MA12#

470pF ±10% GRM033B31H471KA12#

±20% GRM033B31H471MA12#

680pF ±10% GRM033B31H681KA12#

±20% GRM033B31H681MA12#

1000pF ±10% GRM033B31H102KA12#

±20% GRM033B31H102MA12#

1500pF ±10% GRM033B31H152KA12#

±20% GRM033B31H152MA12#

25Vdc X7R 100pF ±10% GRM033R71E101KA01#

150pF ±10% GRM033R71E151KA01#

220pF ±10% GRM033R71E221KA01#

330pF ±10% GRM033R71E331KA01#

470pF ±10% GRM033R71E471KA01#

680pF ±10% GRM033R71E681KA01#

1000pF ±10% GRM033R71E102KA01#

1500pF ±10% GRM033R71E152KA01#

2200pF ±10% GRM033R71E222KA12#

±20% GRM033R71E222MA12#

3300pF ±10% GRM033R71E332KA12#

±20% GRM033R71E332MA12#

R 100pF ±10% GRM033R11E101KA01#

150pF ±10% GRM033R11E151KA01#

220pF ±10% GRM033R11E221KA01#

330pF ±10% GRM033R11E331KA01#

470pF ±10% GRM033R11E471KA01#

680pF ±10% GRM033R11E681KA01#

1000pF ±10% GRM033R11E102KA01#

1500pF ±10% GRM033R11E152KA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc X5R 100pF ±10% GRM033R61E101KA01#

150pF ±10% GRM033R61E151KA01#

220pF ±10% GRM033R61E221KA01#

330pF ±10% GRM033R61E331KA01#

470pF ±10% GRM033R61E471KA01#

680pF ±10% GRM033R61E681KA01#

1000pF ±10% GRM033R61E102KA01#

10000pF ±10% GRM033R61E103KA12#

Derating

±20% GRM033R61E103MA12#

Derating

B 100pF ±10% GRM033B11E101KA01#

150pF ±10% GRM033B11E151KA01#

220pF ±10% GRM033B11E221KA01#

330pF ±10% GRM033B11E331KA01#

470pF ±10% GRM033B11E471KA01#

680pF ±10% GRM033B11E681KA01#

1000pF ±10% GRM033B11E102KA01#

±20% GRM033B11E102MA01#

1500pF ±10% GRM033B11E152KA01#

±20% GRM033B11E152MA01#

2200pF ±10% GRM033B31E222KA12#

±20% GRM033B31E222MA12#

3300pF ±10% GRM033B31E332KA12#

±20% GRM033B31E332MA12#

10000pF ±10% GRM033B31E103KA12#

Derating

±20% GRM033B31E103MA12#

Derating

16Vdc X7R 2200pF ±10% GRM033R71C222KA88#

3300pF ±10% GRM033R71C332KA88#

R 2200pF ±10% GRM033R11C222KA88#

3300pF ±10% GRM033R11C332KA88#

X5R 10000pF ±10% GRM033R61C103KA12#

±20% GRM033R61C103MA12#

0.1µF ±10% GRM033R61C104KE84#

Derating

±20% GRM033R61C104ME84#

Derating

B 2200pF ±10% GRM033B31C222KA87#

±20% GRM033B31C222MA87#

3300pF ±10% GRM033B31C332KA87#

±20% GRM033B31C332MA87#

10000pF ±10% GRM033B31C103KA12#

±20% GRM033B31C103MA12#

0.1µF ±10% GRM033B31C104KE84#

Derating

±20% GRM033B31C104ME84#

Derating

10Vdc X7R 4700pF ±10% GRM033R71A472KA01#

±20% GRM033R71A472MA01#

6800pF ±10% GRM033R71A682KA01#

±20% GRM033R71A682MA01#

10000pF ±10% GRM033R71A103KA01#

±20% GRM033R71A103MA01#

R 4700pF ±10% GRM033R11A472KA01#

±20% GRM033R11A472MA01#

6800pF ±10% GRM033R11A682KA01#

±20% GRM033R11A682MA01#

10000pF ±10% GRM033R11A103KA01#

±20% GRM033R11A103MA01#

X5R 4700pF ±10% GRM033R61A472KA01#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 10Vdc X5R 4700pF ±20% GRM033R61A472MA01#

6800pF ±10% GRM033R61A682KA01#

±20% GRM033R61A682MA01#

10000pF ±10% GRM033R61A103KA01#

±20% GRM033R61A103MA01#

12000pF ±10% GRM033R61A123KE84#

±20% GRM033R61A123ME84#

15000pF ±10% GRM033R61A153KE84#

±20% GRM033R61A153ME84#

18000pF ±10% GRM033R61A183KE84#

±20% GRM033R61A183ME84#

22000pF ±10% GRM033R61A223KE84#

±20% GRM033R61A223ME84#

27000pF ±10% GRM033R61A273KE84#

±20% GRM033R61A273ME84#

33000pF ±10% GRM033R61A333KE84#

±20% GRM033R61A333ME84#

39000pF ±10% GRM033R61A393KE84#

±20% GRM033R61A393ME84#

47000pF ±10% GRM033R61A473KE84#

±20% GRM033R61A473ME84#

68000pF ±10% GRM033R61A683KE84#

±20% GRM033R61A683ME84#

0.1µF ±10% GRM033R61A104KE84#

±20% GRM033R61A104ME84#

0.22µF ±20% GRM033R61A224ME90#

Derating

B 4700pF ±10% GRM033B11A472KA01#

±20% GRM033B11A472MA01#

6800pF ±10% GRM033B11A682KA01#

±20% GRM033B11A682MA01#

10000pF ±10% GRM033B11A103KA01#

±20% GRM033B11A103MA01#

12000pF ±10% GRM033B31A123KE84#

±20% GRM033B31A123ME84#

15000pF ±10% GRM033B31A153KE84#

±20% GRM033B31A153ME84#

18000pF ±10% GRM033B31A183KE84#

±20% GRM033B31A183ME84#

22000pF ±10% GRM033B31A223KE84#

±20% GRM033B31A223ME84#

27000pF ±10% GRM033B31A273KE84#

±20% GRM033B31A273ME84#

33000pF ±10% GRM033B31A333KE84#

±20% GRM033B31A333ME84#

39000pF ±10% GRM033B31A393KE84#

±20% GRM033B31A393ME84#

47000pF ±10% GRM033B31A473KE84#

±20% GRM033B31A473ME84#

68000pF ±10% GRM033B31A683KE84#

±20% GRM033B31A683ME84#

0.1µF ±10% GRM033B31A104KE84#

±20% GRM033B31A104ME84#

6.3Vdc X7R 4700pF ±10% GRM033R70J472KA01#

6800pF ±10% GRM033R70J682KA01#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 6.3Vdc X7R 10000pF ±10% GRM033R70J103KA01#

R 4700pF ±10% GRM033R10J472KA01#

6800pF ±10% GRM033R10J682KA01#

10000pF ±10% GRM033R10J103KA01#

X6S 15000pF ±10% GRM033C80J153KE01#

±20% GRM033C80J153ME01#

22000pF ±10% GRM033C80J223KE01#

±20% GRM033C80J223ME01#

33000pF ±10% GRM033C80J333KE01#

±20% GRM033C80J333ME01#

47000pF ±10% GRM033C80J473KE19#

±20% GRM033C80J473ME19#

68000pF ±10% GRM033C80J683KE84#

Derating

±20% GRM033C80J683ME84#

Derating

0.1µF ±10% GRM033C80J104KE84#

Derating

±20% GRM033C80J104ME84#

Derating

0.22µF ±20% GRM033C80J224ME90#

Derating

X5R 10000pF ±10% GRM033R60J103KA01#

15000pF ±10% GRM033R60J153KE01#

±20% GRM033R60J153ME01#

22000pF ±10% GRM033R60J223KE01#

±20% GRM033R60J223ME01#

33000pF ±10% GRM033R60J333KE01#

±20% GRM033R60J333ME01#

47000pF ±10% GRM033R60J473KE19#

±20% GRM033R60J473ME19#

0.22µF ±20% GRM033R60J224ME90#

B 4700pF ±10% GRM033B10J472KA01#

6800pF ±10% GRM033B10J682KA01#

10000pF ±10% GRM033B10J103KA01#

15000pF ±10% GRM033B10J153KE01#

±20% GRM033B10J153ME01#

22000pF ±10% GRM033B10J223KE01#

±20% GRM033B10J223ME01#

33000pF ±10% GRM033B10J333KE01#

±20% GRM033B10J333ME01#

47000pF ±10% GRM033B30J473KE18#

±20% GRM033B30J473ME18#

4Vdc X6S 0.22µF ±20% GRM033C80G224ME90#

c 1.0×0.5mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 10Vdc X5R 0.1µF ±10% GRM152R61A104KE19#

Derating

±20% GRM152R61A104ME19#

Derating

0.22µF ±10% GRM152R61A224KE19#

Derating

±20% GRM152R61A224ME19#

Derating

B 0.1µF ±10% GRM152B31A104KE19#

Derating

±20% GRM152B31A104ME19#

Derating

0.22µF ±10% GRM152B31A224KE19#

Derating

±20% GRM152B31A224ME19#

Derating

6.3Vdc X6S 0.1µF ±10% GRM152C80J104KE19#

Derating

±20% GRM152C80J104ME19#

Derating

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 6.3Vdc X6S 0.22µF ±10% GRM152C80J224KE19#

Derating

±20% GRM152C80J224ME19#

Derating

X5R 0.1µF ±10% GRM152R60J104KE19#

±20% GRM152R60J104ME19#

0.22µF ±10% GRM152R60J224KE19#

±20% GRM152R60J224ME19#

0.47µF ±20% GRM152R60J474ME15#

Derating

B 0.1µF ±10% GRM152B30J104KE19#

±20% GRM152B30J104ME19#

0.22µF ±10% GRM152B30J224KE19#

±20% GRM152B30J224ME19#

0.47µF ±20% GRM152B30J474ME15#

Derating

4Vdc X7T 0.1µF ±10% GRM152D70G104KE15#

Derating

±20% GRM152D70G104ME15#

Derating

0.22µF ±10% GRM152D70G224KE15#

Derating

±20% GRM152D70G224ME15#

Derating

X6S 0.1µF ±10% GRM152C80G104KE19#

±20% GRM152C80G104ME19#

0.22µF ±10% GRM152C80G224KE19#

±20% GRM152C80G224ME19#

X6T 0.47µF ±20% GRM152D80G474ME15#

2.5Vdc X7T 0.1µF ±10% GRM152D70E104KE19#

±20% GRM152D70E104ME19#

0.22µF ±10% GRM152D70E224KE19#

±20% GRM152D70E224ME19#

0.3mm 50Vdc X7R 220pF ±10% GRM15XR71H221KA86#

330pF ±10% GRM15XR71H331KA86#

470pF ±10% GRM15XR71H471KA86#

680pF ±10% GRM15XR71H681KA86#

1000pF ±10% GRM15XR71H102KA86#

1500pF ±10% GRM15XR71H152KA86#

R 220pF ±10% GRM15XR11H221KA86#

330pF ±10% GRM15XR11H331KA86#

470pF ±10% GRM15XR11H471KA86#

680pF ±10% GRM15XR11H681KA86#

1000pF ±10% GRM15XR11H102KA86#

1500pF ±10% GRM15XR11H152KA86#

B 220pF ±10% GRM15XB11H221KA86#

±20% GRM15XB11H221MA86#

330pF ±10% GRM15XB11H331KA86#

±20% GRM15XB11H331MA86#

470pF ±10% GRM15XB11H471KA86#

±20% GRM15XB11H471MA86#

680pF ±10% GRM15XB11H681KA86#

±20% GRM15XB11H681MA86#

1000pF ±10% GRM15XB11H102KA86#

±20% GRM15XB11H102MA86#

1500pF ±10% GRM15XB11H152KA86#

±20% GRM15XB11H152MA86#

25Vdc X7R 2200pF ±10% GRM15XR71E222KA86#

±20% GRM15XR71E222MA86#

B 2200pF ±10% GRM15XB11E222KA86#

±20% GRM15XB11E222MA86#

16Vdc X7R 3300pF ±10% GRM15XR71C332KA86#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.3mm 16Vdc X7R 3300pF ±20% GRM15XR71C332MA86#

4700pF ±10% GRM15XR71C472KA86#

±20% GRM15XR71C472MA86#

6800pF ±10% GRM15XR71C682KA86#

±20% GRM15XR71C682MA86#

10000pF ±10% GRM15XR71C103KA86#

±20% GRM15XR71C103MA86#

B 3300pF ±10% GRM15XB11C332KA86#

±20% GRM15XB11C332MA86#

4700pF ±10% GRM15XB11C472KA86#

±20% GRM15XB11C472MA86#

6800pF ±10% GRM15XB11C682KA86#

±20% GRM15XB11C682MA86#

10000pF ±10% GRM15XB11C103KA86#

±20% GRM15XB11C103MA86#

10Vdc X5R 15000pF ±10% GRM15XR61A153KA86#

±20% GRM15XR61A153MA86#

22000pF ±10% GRM15XR61A223KA86#

±20% GRM15XR61A223MA86#

33000pF ±10% GRM15XR61A333KA86#

±20% GRM15XR61A333MA86#

0.33mm 10Vdc X5R 1.0µF ±20% GRM153R61A105ME95#

Derating

B 1.0µF ±20% GRM153B31A105ME95#

Derating

6.3Vdc X6T 1.0µF ±20% GRM153D80J105ME95#

Derating

X5R 1.0µF ±20% GRM153R60J105ME95#

B 1.0µF ±20% GRM153B30J105ME95#

4Vdc X6T 1.0µF ±20% GRM153D80G105ME95#

X5R 1.0µF ±20% GRM153R60G105ME95#

0.55mm 100Vdc X7R 220pF ±10% GRM155R72A221KA01#

330pF ±10% GRM155R72A331KA01#

470pF ±10% GRM155R72A471KA01#

680pF ±10% GRM155R72A681KA01#

1000pF ±10% GRM155R72A102KA01#

1500pF ±10% GRM155R72A152KA01#

2200pF ±10% GRM155R72A222KA01#

3300pF ±10% GRM155R72A332KA01#

4700pF ±10% GRM155R72A472KA01#

50Vdc X7R 220pF ±10% GRM155R71H221KA01#

330pF ±10% GRM155R71H331KA01#

470pF ±10% GRM155R71H471KA01#

680pF ±10% GRM155R71H681KA01#

1000pF ±10% GRM155R71H102KA01#

1500pF ±10% GRM155R71H152KA01#

2200pF ±10% GRM155R71H222KA01#

3300pF ±10% GRM155R71H332KA01#

4700pF ±10% GRM155R71H472KA01#

6800pF ±10% GRM155R71H682KA88#

10000pF ±10% GRM155R71H103KA88#

15000pF ±10% GRM155R71H153KA12#

22000pF ±10% GRM155R71H223KA12#

0.1µF ±10% GRM155R71H104KE14#

±20% GRM155R71H104ME14#

X7S 33000pF ±10% GRM155C71H333KE19#

±20% GRM155C71H333ME19#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc X7S 47000pF ±10% GRM155C71H473KE19#

±20% GRM155C71H473ME19#

68000pF ±10% GRM155C71H683KE19#

±20% GRM155C71H683ME19#

R 220pF ±10% GRM155R11H221KA01#

330pF ±10% GRM155R11H331KA01#

470pF ±10% GRM155R11H471KA01#

680pF ±10% GRM155R11H681KA01#

1000pF ±10% GRM155R11H102KA01#

1500pF ±10% GRM155R11H152KA01#

2200pF ±10% GRM155R11H222KA01#

3300pF ±10% GRM155R11H332KA01#

4700pF ±10% GRM155R11H472KA01#

6800pF ±10% GRM155R11H682KA88#

10000pF ±10% GRM155R11H103KA88#

X6S 0.1µF ±10% GRM155C81H104KE14#

±20% GRM155C81H104ME14#

X5R 1000pF ±10% GRM155R61H102KA01#

2200pF ±10% GRM155R61H222KA01#

4700pF ±10% GRM155R61H472KA01#

33000pF ±10% GRM155R61H333KE19#

±20% GRM155R61H333ME19#

47000pF ±10% GRM155R61H473KE19#

±20% GRM155R61H473ME19#

68000pF ±10% GRM155R61H683KE19#

±20% GRM155R61H683ME19#

0.1µF ±10% GRM155R61H104KE14#

±20% GRM155R61H104ME14#

B 220pF ±10% GRM155B11H221KA01#

±20% GRM155B11H221MA01#

330pF ±10% GRM155B11H331KA01#

±20% GRM155B11H331MA01#

470pF ±10% GRM155B11H471KA01#

±20% GRM155B11H471MA01#

680pF ±10% GRM155B11H681KA01#

±20% GRM155B11H681MA01#

1000pF ±10% GRM155B11H102KA01#

±20% GRM155B11H102MA01#

1500pF ±10% GRM155B11H152KA01#

±20% GRM155B11H152MA01#

2200pF ±10% GRM155B11H222KA01#

±20% GRM155B11H222MA01#

3300pF ±10% GRM155B11H332KA01#

±20% GRM155B11H332MA01#

4700pF ±10% GRM155B11H472KA01#

±20% GRM155B11H472MA01#

6800pF ±10% GRM155B31H682KA88#

±20% GRM155B31H682MA88#

10000pF ±10% GRM155B31H103KA88#

±20% GRM155B31H103MA88#

15000pF ±10% GRM155B31H153KA12#

±20% GRM155B31H153MA12#

22000pF ±10% GRM155B31H223KA12#

±20% GRM155B31H223MA12#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc B 0.1µF ±10% GRM155B31H104KE14#

±20% GRM155B31H104ME14#

25Vdc X7R 6800pF ±10% GRM155R71E682KA01#

10000pF ±10% GRM155R71E103KA01#

15000pF ±10% GRM155R71E153KA61#

22000pF ±10% GRM155R71E223KA61#

33000pF ±10% GRM155R71E333KA88#

47000pF ±10% GRM155R71E473KA88#

0.1µF ±10% GRM155R71E104KE14#

±20% GRM155R71E104ME14#

R 6800pF ±10% GRM155R11E682KA01#

10000pF ±10% GRM155R11E103KA01#

15000pF ±10% GRM155R11E153KA61#

22000pF ±10% GRM155R11E223KA61#

33000pF ±10% GRM155R11E333KA88#

47000pF ±10% GRM155R11E473KA88#

X6S 68000pF ±10% GRM155C81E683KA12#

0.1µF ±10% GRM155C81E104KA12#

±20% GRM155C81E104MA12#

X5R 68000pF ±10% GRM155R61E683KA87#

±20% GRM155R61E683MA87#

0.1µF ±10% GRM155R61E104KA87#

±20% GRM155R61E104MA87#

1.0µF ±10% GRM155R61E105KA12#

Derating

±20% GRM155R61E105MA12#

Derating

B 4700pF ±10% GRM155B11E472KA01#

6800pF ±10% GRM155B11E682KA01#

10000pF ±10% GRM155B11E103KA01#

±20% GRM155B11E103MA01#

15000pF ±10% GRM155B11E153KA61#

±20% GRM155B11E153MA61#

22000pF ±10% GRM155B11E223KA61#

±20% GRM155B11E223MA61#

33000pF ±10% GRM155B31E333KA87#

±20% GRM155B31E333MA87#

47000pF ±10% GRM155B31E473KA87#

±20% GRM155B31E473MA87#

68000pF ±10% GRM155B31E683KA87#

±20% GRM155B31E683MA87#

0.1µF ±10% GRM155B31E104KA87#

±20% GRM155B31E104MA87#

1.0µF ±10% GRM155B31E105KA12#

Derating

±20% GRM155B31E105MA12#

Derating

16Vdc X7R 33000pF ±10% GRM155R71C333KA01#

47000pF ±10% GRM155R71C473KA01#

68000pF ±10% GRM155R71C683KA88#

0.15µF ±10% GRM155R71C154KA12#

0.22µF ±10% GRM155R71C224KA12#

R 33000pF ±10% GRM155R11C333KA01#

47000pF ±10% GRM155R11C473KA01#

68000pF ±10% GRM155R11C683KA88#

X5R 33000pF ±10% GRM155R61C333KA01#

47000pF ±10% GRM155R61C473KA01#

68000pF ±10% GRM155R61C683KA88#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 16Vdc X5R 1.0µF ±10% GRM155R61C105KA12#

±20% GRM155R61C105MA12#

B 33000pF ±10% GRM155B11C333KA01#

47000pF ±10% GRM155B11C473KA01#

68000pF ±10% GRM155B31C683KA87#

1.0µF ±10% GRM155B31C105KA12#

±20% GRM155B31C105MA12#

10Vdc X7R 68000pF ±10% GRM155R71A683KA01#

±20% GRM155R71A683MA01#

R 68000pF ±10% GRM155R11A683KA01#

±20% GRM155R11A683MA01#

X6S 1.0µF ±10% GRM155C81A105KA12#

±20% GRM155C81A105MA12#

X5R 0.15µF ±10% GRM155R61A154KE19#

±20% GRM155R61A154ME19#

0.22µF ±10% GRM155R61A224KE19#

±20% GRM155R61A224ME19#

0.33µF ±10% GRM155R61A334KE15#

±20% GRM155R61A334ME15#

0.47µF ±10% GRM155R61A474KE15#

±20% GRM155R61A474ME15#

0.68µF ±10% GRM155R61A684KE15#

±20% GRM155R61A684ME15#

2.2µF ±10% GRM155R61A225KE95#

Derating

±20% GRM155R61A225ME95#

Derating

B 0.15µF ±10% GRM155B31A154KE18#

±20% GRM155B31A154ME18#

0.22µF ±10% GRM155B31A224KE18#

±20% GRM155B31A224ME18#

0.33µF ±10% GRM155B31A334KE14#

±20% GRM155B31A334ME14#

0.47µF ±10% GRM155B31A474KE14#

±20% GRM155B31A474ME14#

0.68µF ±10% GRM155B31A684KE15#

±20% GRM155B31A684ME15#

2.2µF ±10% GRM155B31A225KE95#

Derating

±20% GRM155B31A225ME95#

Derating

6.3Vdc X7R 1.0µF ±10% GRM155R70J105KA12#

Derating

±20% GRM155R70J105MA12#

Derating

X6S 0.15µF ±10% GRM155C80J154KE01#

±20% GRM155C80J154ME01#

0.22µF ±10% GRM155C80J224KE01#

±20% GRM155C80J224ME01#

0.33µF ±10% GRM155C80J334KE01#

±20% GRM155C80J334ME01#

0.47µF ±10% GRM155C80J474KE19#

±20% GRM155C80J474ME19#

2.2µF ±10% GRM155C80J225KE95#

Derating

±20% GRM155C80J225ME95#

Derating

X5R 0.15µF ±10% GRM155R60J154KE01#

±20% GRM155R60J154ME01#

0.22µF ±10% GRM155R60J224KE01#

±20% GRM155R60J224ME01#

0.33µF ±10% GRM155R60J334KE01#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 6.3Vdc X5R 0.33µF ±20% GRM155R60J334ME01#

0.47µF ±10% GRM155R60J474KE19#

±20% GRM155R60J474ME19#

0.68µF ±10% GRM155R60J684KE19#

±20% GRM155R60J684ME19#

2.2µF ±10% GRM155R60J225KE95#

±20% GRM155R60J225ME95#

B 0.15µF ±10% GRM155B10J154KE01#

±20% GRM155B10J154ME01#

0.22µF ±10% GRM155B10J224KE01#

±20% GRM155B10J224ME01#

0.33µF ±10% GRM155B10J334KE01#

±20% GRM155B10J334ME01#

0.47µF ±10% GRM155B30J474KE18#

±20% GRM155B30J474ME18#

0.68µF ±10% GRM155B30J684KE18#

±20% GRM155B30J684ME18#

2.2µF ±10% GRM155B30J225KE95#

±20% GRM155B30J225ME95#

4Vdc X7R 1.0µF ±10% GRM155R70G105KA12#

±20% GRM155R70G105MA12#

X6S 0.15µF ±10% GRM155C80G154KE01#

±20% GRM155C80G154ME01#

0.22µF ±10% GRM155C80G224KE01#

±20% GRM155C80G224ME01#

0.33µF ±10% GRM155C80G334KE01#

±20% GRM155C80G334ME01#

0.47µF ±10% GRM155C80G474KE01#

±20% GRM155C80G474ME01#

X6T 2.2µF ±10% GRM155D80G225KE95#

±20% GRM155D80G225ME95#

0.6mm 6.3Vdc X5R 4.7µF ±20% GRM155R60J475ME47#

Derating

B 4.7µF ±20% GRM155B30J475ME47#

Derating

4Vdc X5R 4.7µF ±20% GRM155R60G475ME47#

B 4.7µF ±20% GRM155B30G475ME47#

2.5Vdc X6T 4.7µF ±20% GRM155D80E475ME47#

Derating

0.7mm 4Vdc X5R 10µF ±20% GRM155R60G106ME44#

2.5Vdc X5R 10µF ±20% GRM155R60E106ME16#

c 1.6×0.8mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 25Vdc X5R 1.0µF ±10% GRM185R61E105KA12#

Derating

±20% GRM185R61E105MA12#

Derating

B 1.0µF ±10% GRM185B31E105KA12#

Derating

±20% GRM185B31E105MA12#

Derating

16Vdc X5R 1.0µF ±10% GRM185R61C105KE44#

±20% GRM185R61C105ME44#

B 1.0µF ±10% GRM185B31C105KE43#

±20% GRM185B31C105ME43#

0.9mm 100Vdc X7R 220pF ±10% GRM188R72A221KA01#

330pF ±10% GRM188R72A331KA01#

470pF ±10% GRM188R72A471KA01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc X7R 680pF ±10% GRM188R72A681KA01#

1000pF ±10% GRM188R72A102KA01#

1500pF ±10% GRM188R72A152KA01#

2200pF ±10% GRM188R72A222KA01#

3300pF ±10% GRM188R72A332KA01#

4700pF ±10% GRM188R72A472KA01#

6800pF ±10% GRM188R72A682KA01#

10000pF ±10% GRM188R72A103KA01#

15000pF ±10% GRM188R72A153KAC4#

±20% GRM188R72A153MAC4#

22000pF ±10% GRM188R72A223KAC4#

±20% GRM188R72A223MAC4#

0.1µF ±10% GRM188R72A104KA35#

50Vdc X7R 220pF ±10% GRM188R71H221KA01#

330pF ±10% GRM188R71H331KA01#

470pF ±10% GRM188R71H471KA01#

680pF ±10% GRM188R71H681KA01#

1000pF ±10% GRM188R71H102KA01#

1500pF ±10% GRM188R71H152KA01#

2200pF ±10% GRM188R71H222KA01#

3300pF ±10% GRM188R71H332KA01#

4700pF ±10% GRM188R71H472KA01#

6800pF ±10% GRM188R71H682KA01#

10000pF ±10% GRM188R71H103KA01#

15000pF ±10% GRM188R71H153KA01#

22000pF ±10% GRM188R71H223KA01#

33000pF ±10% GRM188R71H333KA61#

47000pF ±10% GRM188R71H473KA61#

68000pF ±10% GRM188R71H683KA93#

0.1µF ±10% GRM188R71H104KA93#

R 220pF ±10% GRM188R11H221KA01#

330pF ±10% GRM188R11H331KA01#

470pF ±10% GRM188R11H471KA01#

680pF ±10% GRM188R11H681KA01#

1000pF ±10% GRM188R11H102KA01#

1500pF ±10% GRM188R11H152KA01#

2200pF ±10% GRM188R11H222KA01#

3300pF ±10% GRM188R11H332KA01#

4700pF ±10% GRM188R11H472KA01#

6800pF ±10% GRM188R11H682KA01#

10000pF ±10% GRM188R11H103KA01#

15000pF ±10% GRM188R11H153KA01#

22000pF ±10% GRM188R11H223KA01#

33000pF ±10% GRM188R11H333KA61#

47000pF ±10% GRM188R11H473KA61#

68000pF ±10% GRM188R11H683KA93#

0.1µF ±10% GRM188R11H104KA93#

X5R 1000pF ±10% GRM188R61H102KA01#

2200pF ±10% GRM188R61H222KA01#

4700pF ±10% GRM188R61H472KA01#

10000pF ±10% GRM188R61H103KA01#

22000pF ±10% GRM188R61H223KA01#

0.22µF ±10% GRM188R61H224KAC4#

0.47µF ±10% GRM188R61H474KA12#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc X5R 0.47µF ±20% GRM188R61H474MA12#

1.0µF ±10% GRM188R61H105KAAL#

±20% GRM188R61H105MAAL#

B 220pF ±10% GRM188B11H221KA01#

±20% GRM188B11H221MA01#

330pF ±10% GRM188B11H331KA01#

±20% GRM188B11H331MA01#

470pF ±10% GRM188B11H471KA01#

±20% GRM188B11H471MA01#

680pF ±10% GRM188B11H681KA01#

±20% GRM188B11H681MA01#

1000pF ±10% GRM188B11H102KA01#

±20% GRM188B11H102MA01#

1500pF ±10% GRM188B11H152KA01#

±20% GRM188B11H152MA01#

2200pF ±10% GRM188B11H222KA01#

±20% GRM188B11H222MA01#

3300pF ±10% GRM188B11H332KA01#

±20% GRM188B11H332MA01#

4700pF ±10% GRM188B11H472KA01#

±20% GRM188B11H472MA01#

6800pF ±10% GRM188B11H682KA01#

±20% GRM188B11H682MA01#

10000pF ±10% GRM188B11H103KA01#

±20% GRM188B11H103MA01#

15000pF ±10% GRM188B11H153KA01#

±20% GRM188B11H153MA01#

22000pF ±10% GRM188B11H223KA01#

±20% GRM188B11H223MA01#

33000pF ±10% GRM188B11H333KA61#

±20% GRM188B11H333MA61#

47000pF ±10% GRM188B11H473KA61#

±20% GRM188B11H473MA61#

68000pF ±10% GRM188B31H683KA92#

±20% GRM188B31H683MA92#

0.1µF ±10% GRM188B31H104KA92#

±20% GRM188B31H104MA92#

0.15µF ±10% GRM188B31H154KAC4#

±20% GRM188B31H154MAC4#

0.22µF ±10% GRM188B31H224KAC4#

±20% GRM188B31H224MAC4#

1.0µF ±10% GRM188B31H105KAAL#

±20% GRM188B31H105MAAL#

25Vdc X7R 15000pF ±10% GRM188R71E153KA01#

22000pF ±10% GRM188R71E223KA01#

±20% GRM188R71E223MA01#

33000pF ±10% GRM188R71E333KA01#

47000pF ±10% GRM188R71E473KA01#

68000pF ±10% GRM188R71E683KA01#

0.15µF ±10% GRM188R71E154KA01#

0.22µF ±10% GRM188R71E224KA88#

0.47µF ±10% GRM188R71E474KA12#

1.0µF ±10% GRM188R71E105KA12#

±20% GRM188R71E105MA12#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 25Vdc R 15000pF ±10% GRM188R11E153KA01#

22000pF ±10% GRM188R11E223KA01#

±20% GRM188R11E223MA01#

33000pF ±10% GRM188R11E333KA01#

47000pF ±10% GRM188R11E473KA01#

68000pF ±10% GRM188R11E683KA01#

0.15µF ±10% GRM188R11E154KA01#

0.22µF ±10% GRM188R11E224KA88#

X6S 1.0µF ±10% GRM188C81E105KAAD#

±20% GRM188C81E105MAAD#

X5R 0.1µF ±10% GRM188R61E104KA01#

0.22µF ±10% GRM188R61E224KA88#

0.47µF ±10% GRM188R61E474KA12#

±20% GRM188R61E474MA12#

0.68µF ±10% GRM188R61E684KA75#

±20% GRM188R61E684MA75#

1.0µF ±10% GRM188R61E105KA12#

±20% GRM188R61E105MA12#

2.2µF ±10% GRM188R61E225KA12#

±20% GRM188R61E225MA12#

B 2200pF ±10% GRM188B11E222KA01#

3300pF ±10% GRM188B11E332KA01#

4700pF ±10% GRM188B11E472KA01#

6800pF ±10% GRM188B11E682KA01#

10000pF ±10% GRM188B11E103KA01#

±20% GRM188B11E103MA01#

15000pF ±10% GRM188B11E153KA01#

±20% GRM188B11E153MA01#

22000pF ±10% GRM188B11E223KA01#

±20% GRM188B11E223MA01#

33000pF ±10% GRM188B11E333KA01#

±20% GRM188B11E333MA01#

47000pF ±10% GRM188B11E473KA01#

±20% GRM188B11E473MA01#

68000pF ±10% GRM188B11E683KA01#

±20% GRM188B11E683MA01#

0.1µF ±10% GRM188B11E104KA01#

±20% GRM188B11E104MA01#

0.15µF ±10% GRM188B11E154KA01#

0.22µF ±10% GRM188B31E224KA87#

0.47µF ±10% GRM188B31E474KA75#

±20% GRM188B31E474MA75#

0.68µF ±10% GRM188B31E684KA75#

±20% GRM188B31E684MA75#

1.0µF ±10% GRM188B31E105KA75#

±20% GRM188B31E105MA75#

2.2µF ±10% GRM188B31E225KA12#

±20% GRM188B31E225MA12#

16Vdc X7R 0.15µF ±10% GRM188R71C154KA01#

0.22µF ±10% GRM188R71C224KA01#

0.33µF ±10% GRM188R71C334KA01#

0.47µF ±10% GRM188R71C474KA88#

1.0µF ±10% GRM188R71C105KA12#

±10% GRM188R71C105KE15#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 16Vdc X7R 1.0µF ±20% GRM188R71C105MA12#

±20% GRM188R71C105ME15#

X7S 0.68µF ±10% GRM188C71C684KA12#

R 0.15µF ±10% GRM188R11C154KA01#

0.22µF ±10% GRM188R11C224KA01#

0.33µF ±10% GRM188R11C334KA01#

0.47µF ±10% GRM188R11C474KA88#

X6S 1.0µF ±10% GRM188C81C105KA12#

±20% GRM188C81C105MA12#

2.2µF ±10% GRM188C81C225KA12#

±20% GRM188C81C225MA12#

X5R 0.22µF ±10% GRM188R61C224KA88#

0.68µF ±10% GRM188R61C684KA75#

±20% GRM188R61C684MA75#

1.0µF ±10% GRM188R61C105KA93#

2.2µF ±10% GRM188R61C225KE15#

B 0.15µF ±10% GRM188B11C154KA01#

0.22µF ±10% GRM188B11C224KA01#

0.33µF ±10% GRM188B11C334KA01#

±20% GRM188B11C334MA01#

0.68µF ±10% GRM188B31C684KA75#

±20% GRM188B31C684MA75#

1.0µF ±10% GRM188B31C105KA92#

±20% GRM188B31C105MA92#

2.2µF ±10% GRM188B31C225KE14#

10Vdc X7R 0.33µF ±10% GRM188R71A334KA61#

±20% GRM188R71A334MA61#

0.47µF ±10% GRM188R71A474KA61#

0.68µF ±10% GRM188R71A684KA61#

±20% GRM188R71A684MA61#

2.2µF ±10% GRM188R71A225KE15#

±20% GRM188R71A225ME15#

X7T 2.2µF ±10% GRM188D71A225KE34#

±20% GRM188D71A225ME34#

X6S 2.2µF ±10% GRM188C81A225KE34#

±20% GRM188C81A225ME34#

X5R 0.33µF ±10% GRM188R61A334KA61#

±20% GRM188R61A334MA61#

0.68µF ±10% GRM188R61A684KA61#

±20% GRM188R61A684MA61#

2.2µF ±10% GRM188R61A225KE34#

±20% GRM188R61A225ME34#

B 0.33µF ±10% GRM188B11A334KA61#

±20% GRM188B11A334MA61#

0.68µF ±10% GRM188B11A684KA61#

±20% GRM188B11A684MA61#

2.2µF ±10% GRM188B31A225KE33#

±20% GRM188B31A225ME33#

6.3Vdc X7R 1.0µF ±10% GRM188R70J105KA01#

±20% GRM188R70J105MA01#

X7S 2.2µF ±10% GRM188C70J225KE20#

±20% GRM188C70J225ME20#

X6S 2.2µF ±10% GRM188C80J225KE19#

±20% GRM188C80J225ME19#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 6.3Vdc X6S 4.7µF ±10% GRM188C80J475KE15#

Derating

±20% GRM188C80J475ME15#

Derating

X5R 10µF ±20% GRM188R60J106ME47#

B 10µF ±20% GRM188B30J106ME47#

4Vdc X6S 4.7µF ±10% GRM188C80G475KE19#

±20% GRM188C80G475ME19#

10µF ±20% GRM188C80G106ME47#

Derating

X5R 10µF ±20% GRM188R60G106ME47#

B 10µF ±20% GRM188B30G106ME46#

2.5Vdc X6S 10µF ±20% GRM188C80E106ME47#

0.95mm 25Vdc X5R 4.7µF ±10% GRM188R61E475KE11#

16Vdc X5R 4.7µF ±10% GRM188R61C475KAAJ#

Derating

±20% GRM188R61C475MAAJ#

Derating

B 4.7µF ±10% GRM188B31C475KAAJ#

Derating

±20% GRM188B31C475MAAJ#

Derating

10Vdc B 10µF ±20% GRM188B31A106ME69#

Derating

1mm 35Vdc X5R 4.7µF ±10% GRM188R6YA475KE15#

±20% GRM188R6YA475ME15#

25Vdc X5R 4.7µF ±10% GRM188R61E475KE15#

±20% GRM188R61E475ME15#

10µF ±20% GRM188R61E106MA73#

16Vdc X6S 10µF ±20% GRM188C81C106MA73#

X5R 10µF ±20% GRM188R61C106MA73#

10Vdc X7T 10µF ±20% GRM188D71A106MA73#

X6S 10µF ±20% GRM188C81A106MA73#

6.3Vdc X7T 10µF ±20% GRM188D70J106MA73#

X5R 22µF ±20% GRM188R60J226MEA0#

Derating

B 22µF ±20% GRM188B30J226MEA0#

Derating

4Vdc X6S 22µF ±20% GRM188C80G226MEA0#

Derating

X5R 22µF ±20% GRM188R60G226MEA0#

B 22µF ±20% GRM188B30G226MEA0#

GRM Series High Dielectric Constant Type Part Number List

c 2.0×1.25mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.7mm 25Vdc X5R 1.0µF ±10% GRM216R61E105KA12#

16Vdc X6S 1.0µF ±10% GRM216C81C105KA12#

0.95mm 100Vdc X7R 6800pF ±10% GRM219R72A682KA01#

10000pF ±10% GRM219R72A103KA01#

±20% GRM219R72A103MA01#

50Vdc X7R 10000pF ±10% GRM219R71H103KA01#

±20% GRM219R71H103MA01#

15000pF ±10% GRM219R71H153KA01#

±20% GRM219R71H153MA01#

33000pF ±10% GRM219R71H333KA01#

0.33µF ±10% GRM219R71H334KA88#

R 33000pF ±10% GRM219R11H333KA01#

X5R 1.0µF ±10% GRM219R61H105KA73#

±20% GRM219R61H105MA73#

2.2µF ±10% GRM219R61H225KE15#

±20% GRM219R61H225ME15#

B 33000pF ±10% GRM219B11H333KA01#

0.33µF ±10% GRM219B31H334KA87#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 50Vdc B 0.33µF ±20% GRM219B31H334MA87#

1.0µF ±10% GRM219B31H105KA73#

±20% GRM219B31H105MA73#

2.2µF ±10% GRM219B31H225KE15#

±20% GRM219B31H225ME15#

35Vdc X6S 2.2µF ±10% GRM219C8YA225KE15#

±20% GRM219C8YA225ME15#

X5R 4.7µF ±10% GRM219R6YA475KA73#

Derating

±20% GRM219R6YA475MA73#

Derating

25Vdc X7R 68000pF ±10% GRM219R71E683KA01#

0.1µF ±10% GRM219R71E104KA01#

±20% GRM219R71E104MA01#

0.68µF ±10% GRM219R71E684KA88#

1.0µF ±10% GRM219R71E105KA88#

R 68000pF ±10% GRM219R11E683KA01#

X6S 2.2µF ±10% GRM219C81E225KE15#

±20% GRM219C81E225ME15#

X5R 2.2µF ±10% GRM219R61E225KA12#

±20% GRM219R61E225MA12#

4.7µF ±10% GRM219R61E475KA73#

±20% GRM219R61E475MA73#

10µF ±10% GRM219R61E106KA12#

Derating

±20% GRM219R61E106MA12#

Derating

B 0.47µF ±10% GRM219B31E474KA88#

0.68µF ±10% GRM219B31E684KA88#

1.0µF ±10% GRM219B31E105KA88#

2.2µF ±10% GRM219B31E225KA75#

±20% GRM219B31E225MA75#

10µF ±10% GRM219B31E106KA12#

Derating

±20% GRM219B31E106MA12#

Derating

16Vdc X7R 0.33µF ±10% GRM219R71C334KA88#

0.68µF ±10% GRM219R71C684KA01#

2.2µF ±10% GRM219R71C225KE15#

±20% GRM219R71C225ME15#

R 0.68µF ±10% GRM219R11C684KA01#

X6S 4.7µF ±10% GRM219C81C475KA73#

±20% GRM219C81C475MA73#

X5R 4.7µF ±10% GRM219R61C475KE15#

10µF ±10% GRM219R61C106KA73#

±20% GRM219R61C106MA73#

B 0.68µF ±10% GRM219B11C684KA01#

4.7µF ±10% GRM219B31C475KE15#

10µF ±10% GRM219B31C106KA73#

±20% GRM219B31C106MA73#

10Vdc X7R 2.2µF ±10% GRM219R71A225KE15#

±20% GRM219R71A225ME15#

X7T 4.7µF ±10% GRM219D71A475KE15#

Derating

±20% GRM219D71A475ME15#

Derating

X5R 22µF ±20% GRM219R61A226MEA0#

Derating

B 22µF ±20% GRM219B31A226MEA0#

Derating

6.3Vdc X6S 10µF ±10% GRM219C80J106KE39#

±20% GRM219C80J106ME39#

X5R 22µF ±20% GRM219R60J226ME47#

Derating

B 22µF ±20% GRM219B30J226ME47#

Derating

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 4Vdc X6S 10µF ±10% GRM219C80G106KE19#

±20% GRM219C80G106ME19#

X5R 47µF ±20% GRM219R60G476ME44#

Derating

1mm 100Vdc X7R 0.22µF ±10% GRM21AR72A224KAC5#

0.33µF ±10% GRM21AR72A334KAC5#

50Vdc X7R 22000pF ±10% GRM219R71H223KA17#

±20% GRM219R71H223MA17#

1.35mm 100Vdc X7R 10000pF ±10% GRM21BR72A103KA01#

15000pF ±10% GRM21BR72A153KA01#

22000pF ±10% GRM21BR72A223KA01#

33000pF ±10% GRM21BR72A333KA01#

47000pF ±10% GRM21BR72A473KA01#

68000pF ±10% GRM21BR72A683KAC4#

±20% GRM21BR72A683MAC4#

0.1µF ±10% GRM21BR72A104KAC4#

±20% GRM21BR72A104MAC4#

50Vdc X7R 47000pF ±10% GRM21BR71H473KA01#

68000pF ±10% GRM21BR71H683KA01#

0.1µF ±10% GRM21BR71H104KA01#

±20% GRM21BR71H104MA01#

0.15µF ±10% GRM21BR71H154KA01#

0.22µF ±10% GRM21BR71H224KA01#

0.47µF ±10% GRM21BR71H474KA88#

1.0µF ±10% GRM21BR71H105KA12#

R 47000pF ±10% GRM21BR11H473KA01#

68000pF ±10% GRM21BR11H683KA01#

0.1µF ±10% GRM21BR11H104KA01#

±20% GRM21BR11H104MA01#

X5R 1.0µF ±10% GRM21BR61H105KA12#

B 47000pF ±10% GRM21BB11H473KA01#

68000pF ±10% GRM21BB11H683KA01#

0.1µF ±10% GRM21BB11H104KA01#

±20% GRM21BB11H104MA01#

0.15µF ±10% GRM21BB31H154KA88#

±20% GRM21BB31H154MA88#

0.22µF ±10% GRM21BB31H224KA88#

±20% GRM21BB31H224MA88#

0.47µF ±10% GRM21BB31H474KA87#

±20% GRM21BB31H474MA87#

0.68µF ±10% GRM21BB31H684KAC4#

±20% GRM21BB31H684MAC4#

1.0µF ±10% GRM21BB31H105KA12#

±20% GRM21BB31H105MA12#

25Vdc X7R 0.1µF ±10% GRM21BR71E104KA01#

0.15µF ±10% GRM21BR71E154KA01#

R 0.1µF ±10% GRM21BR11E104KA01#

0.15µF ±10% GRM21BR11E154KA01#

±20% GRM21BR11E154MA01#

0.68µF ±10% GRM21BR11E684KA88#

X6S 4.7µF ±10% GRM21BC81E475KA12#

±20% GRM21BC81E475MA12#

X5R 2.2µF ±10% GRM21BR61E225KA12#

±20% GRM21BR61E225MA12#

4.7µF ±10% GRM21BR61E475KA12#

GRM Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

1.35mm 25Vdc X5R 4.7µF ±20% GRM21BR61E475MA12#

B 0.15µF ±10% GRM21BB11E154KA01#

0.22µF ±10% GRM21BB11E224KA01#

0.33µF ±10% GRM21BB11E334KA01#

2.2µF ±10% GRM21BB31E225KA75#

±20% GRM21BB31E225MA75#

4.7µF ±10% GRM21BB31E475KA75#

±20% GRM21BB31E475MA75#

16Vdc X7R 2.2µF ±10% GRM21BR71C225KA12#

±20% GRM21BR71C225MA12#

X6S 4.7µF ±10% GRM21BC81C475KA88#

X5R 2.2µF ±10% GRM21BR61C225KA88#

4.7µF ±10% GRM21BR61C475KA88#

10µF ±10% GRM21BR61C106KE15#

±20% GRM21BR61C106ME15#

B 2.2µF ±10% GRM21BB31C225KA87#

4.7µF ±10% GRM21BB31C475KA87#

10µF ±10% GRM21BB31C106KE15#

±20% GRM21BB31C106ME15#

10Vdc X6S 10µF ±10% GRM21BC81A106KE18#

±20% GRM21BC81A106ME18#

6.3Vdc X6S 10µF ±10% GRM21BC80J106KE19#

±20% GRM21BC80J106ME19#

1.4mm 100Vdc X7R 0.47µF ±10% GRM21BR72A474KA73#

50Vdc X5R 2.2µF ±10% GRM21BR61H225KA73#

±20% GRM21BR61H225MA73#

4.7µF ±10% GRM21BR61H475KE51#

±20% GRM21BR61H475ME51#

B 2.2µF ±10% GRM21BB31H225KA73#

±20% GRM21BB31H225MA73#

4.7µF ±10% GRM21BB31H475KE51#

±20% GRM21BB31H475ME51#

25Vdc X7R 1.0µF ±10% GRM21BR71E105KA99#

2.2µF ±10% GRM21BR71E225KA73#

R 1.0µF ±10% GRM21BR11E105KA99#

X5R 10µF ±10% GRM21BR61E106KA73#

±20% GRM21BR61E106MA73#

B 1.0µF ±10% GRM21BB31E105KA98#

10µF ±10% GRM21BB31E106KA73#

±20% GRM21BB31E106MA73#

16Vdc X7R 4.7µF ±10% GRM21BR71C475KA73#

±20% GRM21BR71C475MA73#

X6S 10µF ±10% GRM21BC81C106KA73#

±20% GRM21BC81C106MA73#

10Vdc X7R 4.7µF ±10% GRM21BR71A475KA73#

±20% GRM21BR71A475MA73#

10µF ±10% GRM21BR71A106KE51#

±20% GRM21BR71A106ME51#

B22µF ±20% GRM21BB31A226ME51#

Derating

6.3Vdc X7R 10µF ±10% GRM21BR70J106KE76#

±20% GRM21BR70J106ME76#

X6S 22µF ±20% GRM21BC80J226ME51#

Derating

X5R 22µF ±20% GRM21BR60J226ME39#

B 22µF ±20% GRM21BB30J226ME38#

(→ c 2.0×1.25mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

1.4mm 4Vdc X7U 22µF ±20% GRM21BE70G226ME51#

X6S 22µF ±20% GRM21BC80G226ME39#

1.45mm 25Vdc X5R 22µF ±20% GRM21BR61E226ME44#

6.3Vdc X5R 47µF ±20% GRM21BR60J476ME15#

Derating

B 47µF ±20% GRM21BB30J476ME15#

Derating

4Vdc X6S 47µF ±20% GRM21BC80G476ME15#

Derating

X5R 47µF ±20% GRM21BR60G476ME15#

B 47µF ±20% GRM21BB30G476ME15#

GRM Series High Dielectric Constant Type Part Number List

c 3.2×1.6mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.7mm 25Vdc X5R 2.2µF ±10% GRM316R61E225KA12#

B 2.2µF ±10% GRM316B31E225KA75#

16Vdc X6S 2.2µF ±10% GRM316C81C225KA12#

0.95mm 100Vdc X7R 15000pF ±10% GRM319R72A153KA01#

0.1µF ±10% GRM319R72A104KA01#

50Vdc X7R 0.33µF ±10% GRM319R71H334KA01#

35Vdc X5R 10µF ±10% GRM319R6YA106KA12#

Derating

±20% GRM319R6YA106MA12#

Derating

25Vdc X7R 0.33µF ±10% GRM319R71E334KA01#

R 0.33µF ±10% GRM319R11E334KA01#

B 0.33µF ±10% GRM319B11E334KA01#

0.68µF ±10% GRM319B11E684KA01#

16Vdc X6S 4.7µF ±10% GRM319C81C475KA12#

X5R 10µF ±10% GRM319R61C106KE15#

±20% GRM319R61C106ME15#

B 0.47µF ±10% GRM319B11C474KA01#

10µF ±10% GRM319B31C106KE15#

±20% GRM319B31C106ME15#

10Vdc X5R 22µF ±20% GRM319R61A226ME15#

B 22µF ±20% GRM319B31A226ME15#

6.3Vdc X6S 22µF ±20% GRM319C80J226ME15#

X5R 22µF ±20% GRM319R60J226ME15#

B 22µF ±20% GRM319B30J226ME15#

1.25mm 100Vdc X7R 22000pF ±10% GRM31MR72A223KA01#

33000pF ±10% GRM31MR72A333KA01#

47000pF ±10% GRM31MR72A473KA01#

68000pF ±10% GRM31MR72A683KA01#

0.15µF ±10% GRM31MR72A154KA01#

0.22µF ±10% GRM31MR72A224KA01#

50Vdc X7R 0.15µF ±10% GRM31MR71H154KA01#

0.22µF ±10% GRM31MR71H224KA01#

0.47µF ±10% GRM31MR71H474KA01#

0.68µF ±10% GRM31MR71H684KA88#

1.0µF ±10% GRM31MR71H105KA88#

R 0.15µF ±10% GRM31MR11H154KA01#

0.22µF ±10% GRM31MR11H224KA01#

B 0.15µF ±10% GRM31MB11H154KA01#

0.22µF ±10% GRM31MB11H224KA01#

1.0µF ±10% GRM31MB31H105KA87#

25Vdc X5R 10µF ±20% GRM31MR61E106MA12#

B 0.22µF ±10% GRM31MB11E224KA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

1.25mm 16Vdc X6S 10µF ±10% GRM31MC81C106KA12#

B 0.68µF ±10% GRM31MB11C684KA01#

1.3mm 100Vdc X7R 0.47µF ±10% GRM31MR72A474KA35#

±20% GRM31MR72A474MA35#

0.68µF ±10% GRM31MR72A684KA35#

25Vdc B 2.2µF ±10% GRM31MB31E225KA92#

1.8mm 100Vdc X7R 1.0µF ±10% GRM31CR72A105KA01#

50Vdc X7R 2.2µF ±10% GRM31CR71H225KA88#

4.7µF ±10% GRM31CR71H475KA12#

X5R 2.2µF ±10% GRM31CR61H225KA88#

B 2.2µF ±10% GRM31CB31H225KA87#

±20% GRM31CB31H225MA87#

4.7µF ±10% GRM31CB31H475KA12#

±20% GRM31CB31H475MA12#

25Vdc X7R 4.7µF ±10% GRM31CR71E475KA88#

10µF ±10% GRM31CR71E106KA12#

±20% GRM31CR71E106MA12#

X6S 10µF ±10% GRM31CC81E106KE15#

±20% GRM31CC81E106MA12#

X5R 10µF ±10% GRM31CR61E106KA12#

22µF ±20% GRM31CR61E226ME15#

B 10µF ±10% GRM31CB31E106KA75#

22µF ±20% GRM31CB31E226ME15#

16Vdc X7R 4.7µF ±20% GRM31CR71C475MA01#

10µF ±10% GRM31CR71C106KAC7#

±20% GRM31CR71C106MAC7#

R 4.7µF ±20% GRM31CR11C475MA01#

X6S 22µF ±20% GRM31CC81C226ME15#

X5R 10µF ±10% GRM31CR61C106KA88#

22µF ±20% GRM31CR61C226ME15#

B 10µF ±10% GRM31CB31C106KA88#

22µF ±20% GRM31CB31C226ME15#

10Vdc X7R 22µF ±20% GRM31CR71A226ME15#

X6S 22µF ±20% GRM31CC81A226ME19#

X5R 22µF ±20% GRM31CR61A226ME19#

47µF ±20% GRM31CR61A476ME15#

B 22µF ±20% GRM31CB31A226ME19#

47µF ±20% GRM31CB31A476ME15#

6.3Vdc X7R 22µF ±20% GRM31CR70J226ME19#

X7U 47µF ±20% GRM31CE70J476ME15#

Derating

X6S 22µF ±20% GRM31CC80J226ME19#

47µF ±20% GRM31CC80J476ME18#

X5R 47µF ±20% GRM31CR60J476ME19#

B 47µF ±20% GRM31CB30J476ME18#

4Vdc X7U 47µF ±20% GRM31CE70G476ME15#

X6S 47µF ±20% GRM31CC80G476ME19#

1.9mm 100Vdc X7R 2.2µF ±10% GRM31CR72A225KA73#

±20% GRM31CR72A225MA73#

6.3Vdc X6T 100µF ±20% GRM31CD80J107ME39#

Derating

X5R 100µF ±20% GRM31CR60J107ME39#

4Vdc X7U 100µF ±20% GRM31CE70G107ME39#

Derating

X6T 100µF ±20% GRM31CD80G107ME39#

X5R 100µF ±20% GRM31CR60G107ME39#

(→ c 2.0×1.25mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GRM Series High Dielectric Constant Type Part Number List

c 3.2×2.5mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

1mm 6.3Vdc X5S 150µF ±20% GRM32RC60J157ME15#

Derating

4Vdc X6T 150µF ±20% GRM32RD80G157ME15#

Derating

X5S 150µF ±20% GRM32RC60G157ME15#

2.5Vdc X6T 150µF ±20% GRM32RD80E157ME15#

1.5mm 50Vdc X7R 0.68µF ±10% GRM32NR71H684KA01#

B 0.68µF ±10% GRM32NB11H684KA01#

10Vdc X6S 22µF ±20% GRM32NC81A226ME19#

1.8mm 100Vdc X7R 0.68µF ±10% GRM32CR72A684KA01#

1.0µF ±10% GRM32CR72A105KA35#

2.2mm 25Vdc X7R 10µF ±10% GRM32DR71E106KA12#

X6S 10µF ±10% GRM32DC81E106KA12#

2.7mm 100Vdc X7R 2.2µF ±10% GRM32ER72A225KA35#

±20% GRM32ER72A225MA35#

50Vdc X7R 4.7µF ±10% GRM32ER71H475KA88#

10µF ±10% GRM32ER71H106KA12#

X5R 10µF ±10% GRM32ER61H106KA12#

±20% GRM32ER61H106MA12#

B 4.7µF ±10% GRM32EB31H475KA87#

10µF ±10% GRM32EB31H106KA12#

±20% GRM32EB31H106MA12#

35Vdc X7R 10µF ±10% GRM32ER7YA106KA12#

X5R 10µF ±10% GRM32ER6YA106KA12#

B 10µF ±10% GRM32EB3YA106KA12#

25Vdc X7R 22µF ±20% GRM32ER71E226ME15#

X6S 22µF ±20% GRM32EC81E226ME15#

X5R 22µF ±20% GRM32ER61E226ME15#

B 22µF ±20% GRM32EB31E226ME15#

16Vdc X7R 22µF ±20% GRM32ER71C226MEA8#

X6S 47µF ±20% GRM32EC81C476ME15#

Derating

X5R 47µF ±20% GRM32ER61C476ME15#

B 22µF ±20% GRM32EB31C226ME16#

47µF ±20% GRM32EB31C476ME15#

10Vdc X7R 47µF ±20% GRM32ER71A476ME15#

X6S 47µF ±20% GRM32EC81A476ME19#

X5R 47µF ±20% GRM32ER61A476ME20#

B 47µF ±20% GRM32EB31A476ME20#

6.3Vdc X7R 47µF ±20% GRM32ER70J476ME20#

X7U 100µF ±20% GRM32EE70J107ME15#

Derating

X6S 47µF ±20% GRM32EC80J476ME64#

100µF ±20% GRM32EC80J107ME20#

X5R 100µF ±20% GRM32ER60J107ME20#

B 100µF ±20% GRM32EB30J107ME16#

4Vdc X7U 100µF ±20% GRM32EE70G107ME19#

X6S 100µF ±20% GRM32EC80G107ME20#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1The number of parts can be reduced.

2Also contributes to the low profile of the set.

3Ideal for decoupling and smoothing.

4Reduction of environmental impact substances is possible.

(Accommodates 2 or 4 times the number of individual chips per reel.)

Ideal for reducing the mounting area and mounting costs.

1234

8765

1234

8765

2 Elements 4 Elements

Capacitor Array GNM Series

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GNM Series High Dielectric Constant Type Part Number List

c 2 Elements 0.9×0.6mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 16Vdc X5R 10000pF ±20% GNM0M2R61C103ME18#

22000pF ±20% GNM0M2R61C223ME18#

47000pF ±20% GNM0M2R61C473ME18#

0.1µF ±20% GNM0M2R61C104ME18#

B 10000pF ±20% GNM0M2B31C103ME18#

22000pF ±20% GNM0M2B31C223ME18#

47000pF ±20% GNM0M2B31C473ME18#

0.1µF ±20% GNM0M2B31C104ME18#

10Vdc X5R 10000pF ±20% GNM0M2R61A103ME17#

22000pF ±20% GNM0M2R61A223ME17#

47000pF ±20% GNM0M2R61A473ME17#

0.1µF ±20% GNM0M2R61A104ME17#

B 10000pF ±20% GNM0M2B31A103ME17#

22000pF ±20% GNM0M2B31A223ME17#

47000pF ±20% GNM0M2B31A473ME17#

0.1µF ±20% GNM0M2B31A104ME17#

4Vdc X5R 1.0µF ±20% GNM0M2R60G105ME17#

B 1.0µF ±20% GNM0M2B30G105ME17#

c 2 Elements 1.37×1.0mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 16Vdc X7R 0.1µF ±20% GNM1M2R71C104MAA1#

R 0.1µF ±20% GNM1M2R11C104MAA1#

X5R 1.0µF ±20% GNM1M2R61C105MEA2#

B 0.1µF ±20% GNM1M2B11C104MAA1#

10Vdc X5R 1.0µF ±20% GNM1M2R61A105MEA4#

B 1.0µF ±20% GNM1M2B31A105MEA4#

0.7mm 50Vdc X7R 1000pF ±20% GNM1M2R71H102MA01#

R 1000pF ±20% GNM1M2R11H102MA01#

X5R 1000pF ±20% GNM1M2R61H102MA01#

B 1000pF ±20% GNM1M2B11H102MA01#

25Vdc X7R 2200pF ±20% GNM1M2R71E222MA01#

4700pF ±20% GNM1M2R71E472MA01#

10000pF ±20% GNM1M2R71E103MA01#

R 2200pF ±20% GNM1M2R11E222MA01#

4700pF ±20% GNM1M2R11E472MA01#

10000pF ±20% GNM1M2R11E103MA01#

X5R 2200pF ±20% GNM1M2R61E222MA01#

4700pF ±20% GNM1M2R61E472MA01#

10000pF ±20% GNM1M2R61E103MA01#

B 2200pF ±20% GNM1M2B11E222MA01#

4700pF ±20% GNM1M2B11E472MA01#

10000pF ±20% GNM1M2B11E103MA01#

16Vdc X7R 22000pF ±20% GNM1M2R71C223MA01#

47000pF ±20% GNM1M2R71C473MA01#

0.1µF ±20% GNM1M2R71C104MA01#

R 22000pF ±20% GNM1M2R11C223MA01#

47000pF ±20% GNM1M2R11C473MA01#

0.1µF ±20% GNM1M2R11C104MA01#

X5R 22000pF ±20% GNM1M2R61C223MA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.7mm 16Vdc X5R 47000pF ±20% GNM1M2R61C473MA01#

B 22000pF ±20% GNM1M2B11C223MA01#

47000pF ±20% GNM1M2B11C473MA01#

0.1µF ±20% GNM1M2B11C104MA01#

10Vdc X7R 22000pF ±20% GNM1M2R71A223MA01#

47000pF ±20% GNM1M2R71A473MA01#

R 22000pF ±20% GNM1M2R11A223MA01#

47000pF ±20% GNM1M2R11A473MA01#

X5R 22000pF ±20% GNM1M2R61A223MA01#

47000pF ±20% GNM1M2R61A473MA01#

0.1µF ±20% GNM1M2R61A104MA01#

B 22000pF ±20% GNM1M2B11A223MA01#

47000pF ±20% GNM1M2B11A473MA01#

0.1µF ±20% GNM1M2B11A104MA01#

0.8mm 16Vdc X5R 0.22µF ±20% GNM1M2R61C224ME18#

1.0µF ±20% GNM1M2R61C105ME18#

B 1.0µF ±20% GNM1M2B31C105ME18#

10Vdc X5R 1.0µF ±20% GNM1M2R61A105ME17#

2.2µF ±20% GNM1M2R61A225ME18#

B 0.22µF ±20% GNM1M2B31A224ME17#

0.47µF ±20% GNM1M2B31A474ME17#

1.0µF ±20% GNM1M2B31A105ME17#

2.2µF ±20% GNM1M2B31A225ME18#

6.3Vdc X5R 2.2µF ±20% GNM1M2R60J225ME18#

B 2.2µF ±20% GNM1M2B30J225ME18#

c 4 Elements 2.0×1.25mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 16Vdc X7R 0.1µF ±20% GNM214R71C104MAA1#

R 0.1µF ±20% GNM214R11C104MAA1#

B 0.1µF ±20% GNM214B11C104MAA1#

10Vdc X5R 0.22µF ±20% GNM214R61A224MEA2#

1.0µF ±20% GNM214R61A105MEA2#

B 0.22µF ±20% GNM214B31A224MEA2#

1.0µF ±20% GNM214B31A105MEA2#

6.3Vdc X5R 0.22µF ±20% GNM214R60J224MEA2#

1.0µF ±20% GNM214R60J105MEA2#

B 0.22µF ±20% GNM214B30J224MEA2#

1.0µF ±20% GNM214B30J105MEA2#

0.7mm 50Vdc X7R 470pF ±20% GNM214R71H471MA01#

1000pF ±20% GNM214R71H102MA01#

R 1000pF ±20% GNM214R11H102MA01#

B 470pF ±20% GNM214B11H471MA01#

1000pF ±20% GNM214B11H102MA01#

25Vdc X7R 2200pF ±20% GNM214R71E222MA01#

4700pF ±20% GNM214R71E472MA01#

10000pF ±20% GNM214R71E103MA01#

R 2200pF ±20% GNM214R11E222MA01#

4700pF ±20% GNM214R11E472MA01#

10000pF ±20% GNM214R11E103MA01#

B 2200pF ±20% GNM214B11E222MA01#

4700pF ±20% GNM214B11E472MA01#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.7mm 25Vdc B 10000pF ±20% GNM214B11E103MA01#

0.95mm 16Vdc X7R 22000pF ±20% GNM214R71C223MA01#

47000pF ±20% GNM214R71C473MA01#

0.1µF ±20% GNM214R71C104MA01#

R 22000pF ±20% GNM214R11C223MA01#

47000pF ±20% GNM214R11C473MA01#

0.1µF ±20% GNM214R11C104MA01#

B 22000pF ±20% GNM214B11C223MA01#

47000pF ±20% GNM214B11C473MA01#

0.1µF ±20% GNM214B11C104MA01#

10Vdc X5R 1.0µF ±20% GNM214R61A105ME17#

B 1.0µF ±20% GNM214B31A105ME17#

6.3Vdc X5R 1.0µF ±20% GNM214R60J105ME17#

B 1.0µF ±20% GNM214B30J105ME17#

GNM Series High Dielectric Constant Type Part Number List

(→ c 4 Elements 2.0×1.25mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).

2LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance

requirements.

Ideal decoupling solution for equipment having advanced features.LLL Series

1Reduces the anti-resonance generated in the high-frequency range.

2An optimal ESR value can be selected from four types, according to the characteristics of the circuit.

3The low ESL type, is also ideal as a decoupling component.

Low ESL capacitor that suppresses the anti-resonance in circuits.LLR Series

1Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).

2LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance

requirements.

Ideal decoupling solution for equipment having advanced features.LLA Series

1234

8765

1357

2468

1Ideal for IC decoupling of high-speed operating equipment, due to the low inductance value (ESL value).

2LW reversed geometry type/multi-terminal type and a large lineup of capacitors are available according to performance

requirements.

Ideal decoupling solution for equipment having advanced features.LLM Series

513579

246810

1234

9876

Low ESL LLL/LLR/LLA/LLM Series

Chip Monolithic Ceramic Capacitors

Low

ESL

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

LLL Series High Dielectric Constant Type

Low

ESL

Part Number List

c 0.5×1.0mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.35mm 6.3Vdc X6S 0.1µF ±20% LLL153C80J104ME01#

0.22µF ±20% LLL153C80J224ME14#

4Vdc X7S 0.47µF ±20% LLL153C70G474ME17#

c 0.8×1.6mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 25Vdc X7R 10000pF ±20% LLL185R71E103MA11#

16Vdc X7R 22000pF ±20% LLL185R71C223MA11#

47000pF ±20% LLL185R71C473MA11#

10Vdc X7R 0.1µF ±20% LLL185R71A104MA11#

4Vdc X7S 0.22µF ±20% LLL185C70G224MA11#

0.55mm 4Vdc X7S 1.0µF ±20% LLL185C70G105ME01#

2.2µF ±20% LLL185C70G225ME01#

0.6mm 50Vdc X7R 2200pF ±20% LLL185R71H222MA01#

4700pF ±20% LLL185R71H472MA01#

25Vdc X7R 10000pF ±20% LLL185R71E103MA01#

22000pF ±20% LLL185R71E223MA01#

16Vdc X7R 47000pF ±20% LLL185R71C473MA01#

10Vdc X7R 0.1µF ±20% LLL185R71A104MA01#

0.22µF ±20% LLL185R71A224MA01#

4Vdc X7S 0.47µF ±20% LLL185C70G474MA01#

c 1.25×2.0mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 50Vdc X7R 10000pF ±20% LLL215R71H103MA11#

25Vdc X7R 22000pF ±20% LLL215R71E223MA11#

16Vdc X7R 47000pF ±20% LLL215R71C473MA11#

0.1µF ±20% LLL215R71C104MA11#

10Vdc X7R 0.22µF ±20% LLL215R71A224MA11#

6.3Vdc X7R 0.47µF ±20% LLL215R70J474MA11#

c 1.6×3.2mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 50Vdc X7R 10000pF ±20% LLL315R71H103MA11#

22000pF ±20% LLL315R71H223MA11#

25Vdc X7R 47000pF ±20% LLL315R71E473MA11#

0.1µF ±20% LLL315R71E104MA11#

16Vdc X7R 0.22µF ±20% LLL315R71C224MA11#

10Vdc X7R 0.47µF ±20% LLL315R71A474MA11#

0.8mm 50Vdc X7R 10000pF ±20% LLL317R71H103MA01#

22000pF ±20% LLL317R71H223MA01#

47000pF ±20% LLL317R71H473MA01#

25Vdc X7R 0.1µF ±20% LLL317R71E104MA01#

16Vdc X7R 0.22µF ±20% LLL317R71C224MA01#

0.47µF ±20% LLL317R71C474MA01#

10Vdc X7R 1.0µF ±20% LLL317R71A105MA01#

6.3Vdc X7R 2.2µF ±20% LLL317R70J225MA01#

1.25mm 50Vdc X7R 0.1µF ±20% LLL31MR71H104MA01#

25Vdc X7R 0.22µF ±20% LLL31MR71E224MA01#

0.47µF ±20% LLL31MR71E474MA01#

16Vdc X7R 1.0µF ±20% LLL31MR71C105MA01#

10Vdc X7R 2.2µF ±20% LLL31MR71A225MA01#

6.3Vdc X7R 4.7µF ±20% LLL31MR70J475MA01#

X5R 10µF ±20% LLL31MR60J106ME01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.5mm 4Vdc X7S 1.0µF ±20% LLL215C70G105MA11#

0.7mm 50Vdc X7R 10000pF ±20% LLL216R71H103MA01#

22000pF ±20% LLL216R71H223MA01#

25Vdc X7R 47000pF ±20% LLL216R71E473MA01#

0.1µF ±20% LLL216R71E104MA01#

10Vdc X7R 0.22µF ±20% LLL216R71A224MA01#

0.95mm 16Vdc X7R 0.22µF ±20% LLL219R71C224MA01#

10Vdc X7R 0.47µF ±20% LLL219R71A474MA01#

1.0µF ±20% LLL219R71A105MA01#

4Vdc X7S 2.2µF ±20% LLL219C70G225MA01#

LLR Series High Dielectric Constant Type

Low

ESL

Part Number List

c 0.8×1.6mm

max.

Rated

Voltage

Code Cap. Tol. ESR Part Number

0.55mm 4Vdc X7S 1.0µF ±20% 100mΩLLR185C70G105ME01#

±20% 220mΩLLR185C70G105ME03#

±20% 470mΩLLR185C70G105ME05#

±20% 1000mΩLLR185C70G105ME07#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

LLA Series High Dielectric Constant Type

Low

ESL

Part Number List

c 1.6×0.8mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 4Vdc X7S 0.1µF ±20% LLA185C70G104MA01#

0.22µF ±20% LLA185C70G224MA01#

0.47µF ±20% LLA185C70G474MA01#

1.0µF ±20% LLA185C70G105ME01#

2.2µF ±20% LLA185C70G225ME16#

c 2.0×1.25mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 25Vdc X7R 10000pF ±20% LLA215R71E103MA14#

22000pF ±20% LLA215R71E223MA14#

16Vdc X7R 47000pF ±20% LLA215R71C473MA14#

0.1µF ±20% LLA215R71C104MA14#

10Vdc X7R 0.22µF ±20% LLA215R71A224MA14#

6.3Vdc X7R 0.47µF ±20% LLA215R70J474MA14#

4Vdc X7S 1.0µF ±20% LLA215C70G105MA14#

2.2µF ±20% LLA215C70G225ME11#

4.7µF ±20% LLA215C70G475ME19#

0.95mm 25Vdc X7R 10000pF ±20% LLA219R71E103MA01#

c 3.2×1.6mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 16Vdc X7R 0.22µF ±20% LLA315R71C224MA14#

10Vdc X7R 0.47µF ±20% LLA315R71A474MA14#

6.3Vdc X7R 1.0µF ±20% LLA315R70J105MA14#

2.2µF ±20% LLA315R70J225MA14#

0.95mm 16Vdc X7R 0.47µF ±20% LLA319R71C474MA01#

10Vdc X7R 1.0µF ±20% LLA319R71A105MA01#

1.25mm 16Vdc X7R 1.0µF ±20% LLA31MR71C105MA01#

10Vdc X7R 2.2µF ±20% LLA31MR71A225MA01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 25Vdc X7R 22000pF ±20% LLA219R71E223MA01#

47000pF ±20% LLA219R71E473MA01#

16Vdc X7R 0.1µF ±20% LLA219R71C104MA01#

0.22µF ±20% LLA219R71C224MA01#

10Vdc X7R 0.47µF ±20% LLA219R71A474MA01#

6.3Vdc X7R 1.0µF ±20% LLA219R70J105MA01#

4Vdc X7S 2.2µF ±20% LLA219C70G225MA01#

4.7µF ±20% LLA219C70G475ME01#

LLM Series High Dielectric Constant Type

Low

ESL

Part Number List

c 2.0×1.25mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 25Vdc X7R 10000pF ±20% LLM215R71E103MA11#

22000pF ±20% LLM215R71E223MA11#

16Vdc X7R 47000pF ±20% LLM215R71C473MA11#

0.1µF ±20% LLM215R71C104MA11#

6.3Vdc X7R 0.22µF ±20% LLM215R70J224MA11#

0.47µF ±20% LLM215R70J474MA11#

4Vdc X7S 1.0µF ±20% LLM215C70G105MA11#

2.2µF ±20% LLM215C70G225ME11#

c 3.2×1.6mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 16Vdc X7R 0.1µF ±20% LLM315R71C104MA11#

0.22µF ±20% LLM315R71C224MA11#

10Vdc X7R 0.47µF ±20% LLM315R71A474MA11#

6.3Vdc X7R 2.2µF ±20% LLM315R70J225MA11#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1Ideal for high-frequency decoupling applications.

2HiQ and low ESR in VHF, UHF and microwave frequency bands.

3Compatible to tight tolerances.

Contributes to improvements in the reduction of power consumption and processing yield

by HiQ or low ESR.

ege

HiQ

High-Q Type GJM Series

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GJM Series Temperature Compensating Type HiQ Part Number List

c 0.4×0.2mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 0.2pF ±0.05pF GJM0225C1CR20WB01#

±0.1pF GJM0225C1CR20BB01#

0.3pF ±0.05pF GJM0225C1CR30WB01#

±0.1pF GJM0225C1CR30BB01#

0.4pF ±0.05pF GJM0225C1CR40WB01#

±0.1pF GJM0225C1CR40BB01#

0.5pF ±0.05pF GJM0225C1CR50WB01#

±0.1pF GJM0225C1CR50BB01#

0.6pF ±0.05pF GJM0225C1CR60WB01#

±0.1pF GJM0225C1CR60BB01#

0.7pF ±0.05pF GJM0225C1CR70WB01#

±0.1pF GJM0225C1CR70BB01#

0.8pF ±0.05pF GJM0225C1CR80WB01#

±0.1pF GJM0225C1CR80BB01#

0.9pF ±0.05pF GJM0225C1CR90WB01#

±0.1pF GJM0225C1CR90BB01#

1.0pF ±0.05pF GJM0225C1C1R0WB01#

±0.1pF GJM0225C1C1R0BB01#

±0.25pF GJM0225C1C1R0CB01#

1.1pF ±0.05pF GJM0225C1C1R1WB01#

±0.1pF GJM0225C1C1R1BB01#

±0.25pF GJM0225C1C1R1CB01#

1.2pF ±0.05pF GJM0225C1C1R2WB01#

±0.1pF GJM0225C1C1R2BB01#

±0.25pF GJM0225C1C1R2CB01#

1.3pF ±0.05pF GJM0225C1C1R3WB01#

±0.1pF GJM0225C1C1R3BB01#

±0.25pF GJM0225C1C1R3CB01#

1.4pF ±0.05pF GJM0225C1C1R4WB01#

±0.1pF GJM0225C1C1R4BB01#

±0.25pF GJM0225C1C1R4CB01#

1.5pF ±0.05pF GJM0225C1C1R5WB01#

±0.1pF GJM0225C1C1R5BB01#

±0.25pF GJM0225C1C1R5CB01#

1.6pF ±0.05pF GJM0225C1C1R6WB01#

±0.1pF GJM0225C1C1R6BB01#

±0.25pF GJM0225C1C1R6CB01#

1.7pF ±0.05pF GJM0225C1C1R7WB01#

±0.1pF GJM0225C1C1R7BB01#

±0.25pF GJM0225C1C1R7CB01#

1.8pF ±0.05pF GJM0225C1C1R8WB01#

±0.1pF GJM0225C1C1R8BB01#

±0.25pF GJM0225C1C1R8CB01#

1.9pF ±0.05pF GJM0225C1C1R9WB01#

±0.1pF GJM0225C1C1R9BB01#

±0.25pF GJM0225C1C1R9CB01#

2.0pF ±0.05pF GJM0225C1C2R0WB01#

±0.1pF GJM0225C1C2R0BB01#

±0.25pF GJM0225C1C2R0CB01#

2.1pF ±0.05pF GJM0225C1C2R1WB01#

±0.1pF GJM0225C1C2R1BB01#

±0.25pF GJM0225C1C2R1CB01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 2.2pF ±0.05pF GJM0225C1C2R2WB01#

±0.1pF GJM0225C1C2R2BB01#

±0.25pF GJM0225C1C2R2CB01#

2.3pF ±0.05pF GJM0225C1C2R3WB01#

±0.1pF GJM0225C1C2R3BB01#

±0.25pF GJM0225C1C2R3CB01#

2.4pF ±0.05pF GJM0225C1C2R4WB01#

±0.1pF GJM0225C1C2R4BB01#

±0.25pF GJM0225C1C2R4CB01#

2.5pF ±0.05pF GJM0225C1C2R5WB01#

±0.1pF GJM0225C1C2R5BB01#

±0.25pF GJM0225C1C2R5CB01#

2.6pF ±0.05pF GJM0225C1C2R6WB01#

±0.1pF GJM0225C1C2R6BB01#

±0.25pF GJM0225C1C2R6CB01#

2.7pF ±0.05pF GJM0225C1C2R7WB01#

±0.1pF GJM0225C1C2R7BB01#

±0.25pF GJM0225C1C2R7CB01#

2.8pF ±0.05pF GJM0225C1C2R8WB01#

±0.1pF GJM0225C1C2R8BB01#

±0.25pF GJM0225C1C2R8CB01#

2.9pF ±0.05pF GJM0225C1C2R9WB01#

±0.1pF GJM0225C1C2R9BB01#

±0.25pF GJM0225C1C2R9CB01#

3.0pF ±0.05pF GJM0225C1C3R0WB01#

±0.1pF GJM0225C1C3R0BB01#

±0.25pF GJM0225C1C3R0CB01#

3.1pF ±0.05pF GJM0225C1C3R1WB01#

±0.1pF GJM0225C1C3R1BB01#

±0.25pF GJM0225C1C3R1CB01#

3.2pF ±0.05pF GJM0225C1C3R2WB01#

±0.1pF GJM0225C1C3R2BB01#

±0.25pF GJM0225C1C3R2CB01#

3.3pF ±0.05pF GJM0225C1C3R3WB01#

±0.1pF GJM0225C1C3R3BB01#

±0.25pF GJM0225C1C3R3CB01#

3.4pF ±0.05pF GJM0225C1C3R4WB01#

±0.1pF GJM0225C1C3R4BB01#

±0.25pF GJM0225C1C3R4CB01#

3.5pF ±0.05pF GJM0225C1C3R5WB01#

±0.1pF GJM0225C1C3R5BB01#

±0.25pF GJM0225C1C3R5CB01#

3.6pF ±0.05pF GJM0225C1C3R6WB01#

±0.1pF GJM0225C1C3R6BB01#

±0.25pF GJM0225C1C3R6CB01#

3.7pF ±0.05pF GJM0225C1C3R7WB01#

±0.1pF GJM0225C1C3R7BB01#

±0.25pF GJM0225C1C3R7CB01#

3.8pF ±0.05pF GJM0225C1C3R8WB01#

±0.1pF GJM0225C1C3R8BB01#

±0.25pF GJM0225C1C3R8CB01#

3.9pF ±0.05pF GJM0225C1C3R9WB01#

±0.1pF GJM0225C1C3R9BB01#

±0.25pF GJM0225C1C3R9CB01#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 4.0pF ±0.05pF GJM0225C1C4R0WB01#

±0.1pF GJM0225C1C4R0BB01#

±0.25pF GJM0225C1C4R0CB01#

4.1pF ±0.05pF GJM0225C1C4R1WB01#

±0.1pF GJM0225C1C4R1BB01#

±0.25pF GJM0225C1C4R1CB01#

4.2pF ±0.05pF GJM0225C1C4R2WB01#

±0.1pF GJM0225C1C4R2BB01#

±0.25pF GJM0225C1C4R2CB01#

4.3pF ±0.05pF GJM0225C1C4R3WB01#

±0.1pF GJM0225C1C4R3BB01#

±0.25pF GJM0225C1C4R3CB01#

4.4pF ±0.05pF GJM0225C1C4R4WB01#

±0.1pF GJM0225C1C4R4BB01#

±0.25pF GJM0225C1C4R4CB01#

4.5pF ±0.05pF GJM0225C1C4R5WB01#

±0.1pF GJM0225C1C4R5BB01#

±0.25pF GJM0225C1C4R5CB01#

4.6pF ±0.05pF GJM0225C1C4R6WB01#

±0.1pF GJM0225C1C4R6BB01#

±0.25pF GJM0225C1C4R6CB01#

4.7pF ±0.05pF GJM0225C1C4R7WB01#

±0.1pF GJM0225C1C4R7BB01#

±0.25pF GJM0225C1C4R7CB01#

4.8pF ±0.05pF GJM0225C1C4R8WB01#

±0.1pF GJM0225C1C4R8BB01#

±0.25pF GJM0225C1C4R8CB01#

4.9pF ±0.05pF GJM0225C1C4R9WB01#

±0.1pF GJM0225C1C4R9BB01#

±0.25pF GJM0225C1C4R9CB01#

5.0pF ±0.05pF GJM0225C1C5R0WB01#

±0.1pF GJM0225C1C5R0BB01#

±0.25pF GJM0225C1C5R0CB01#

5.1pF ±0.05pF GJM0225C1C5R1WB01#

±0.1pF GJM0225C1C5R1BB01#

±0.25pF GJM0225C1C5R1CB01#

±0.5pF GJM0225C1C5R1DB01#

5.2pF ±0.05pF GJM0225C1C5R2WB01#

±0.1pF GJM0225C1C5R2BB01#

±0.25pF GJM0225C1C5R2CB01#

±0.5pF GJM0225C1C5R2DB01#

5.3pF ±0.05pF GJM0225C1C5R3WB01#

±0.1pF GJM0225C1C5R3BB01#

±0.25pF GJM0225C1C5R3CB01#

±0.5pF GJM0225C1C5R3DB01#

5.4pF ±0.05pF GJM0225C1C5R4WB01#

±0.1pF GJM0225C1C5R4BB01#

±0.25pF GJM0225C1C5R4CB01#

±0.5pF GJM0225C1C5R4DB01#

5.5pF ±0.05pF GJM0225C1C5R5WB01#

±0.1pF GJM0225C1C5R5BB01#

±0.25pF GJM0225C1C5R5CB01#

±0.5pF GJM0225C1C5R5DB01#

5.6pF ±0.05pF GJM0225C1C5R6WB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 5.6pF ±0.1pF GJM0225C1C5R6BB01#

±0.25pF GJM0225C1C5R6CB01#

±0.5pF GJM0225C1C5R6DB01#

5.7pF ±0.05pF GJM0225C1C5R7WB01#

±0.1pF GJM0225C1C5R7BB01#

±0.25pF GJM0225C1C5R7CB01#

±0.5pF GJM0225C1C5R7DB01#

5.8pF ±0.05pF GJM0225C1C5R8WB01#

±0.1pF GJM0225C1C5R8BB01#

±0.25pF GJM0225C1C5R8CB01#

±0.5pF GJM0225C1C5R8DB01#

5.9pF ±0.05pF GJM0225C1C5R9WB01#

±0.1pF GJM0225C1C5R9BB01#

±0.25pF GJM0225C1C5R9CB01#

±0.5pF GJM0225C1C5R9DB01#

6.0pF ±0.05pF GJM0225C1C6R0WB01#

±0.1pF GJM0225C1C6R0BB01#

±0.25pF GJM0225C1C6R0CB01#

±0.5pF GJM0225C1C6R0DB01#

6.1pF ±0.05pF GJM0225C1C6R1WB01#

±0.1pF GJM0225C1C6R1BB01#

±0.25pF GJM0225C1C6R1CB01#

±0.5pF GJM0225C1C6R1DB01#

6.2pF ±0.05pF GJM0225C1C6R2WB01#

±0.1pF GJM0225C1C6R2BB01#

±0.25pF GJM0225C1C6R2CB01#

±0.5pF GJM0225C1C6R2DB01#

6.3pF ±0.05pF GJM0225C1C6R3WB01#

±0.1pF GJM0225C1C6R3BB01#

±0.25pF GJM0225C1C6R3CB01#

±0.5pF GJM0225C1C6R3DB01#

6.4pF ±0.05pF GJM0225C1C6R4WB01#

±0.1pF GJM0225C1C6R4BB01#

±0.25pF GJM0225C1C6R4CB01#

±0.5pF GJM0225C1C6R4DB01#

6.5pF ±0.05pF GJM0225C1C6R5WB01#

±0.1pF GJM0225C1C6R5BB01#

±0.25pF GJM0225C1C6R5CB01#

±0.5pF GJM0225C1C6R5DB01#

6.6pF ±0.05pF GJM0225C1C6R6WB01#

±0.1pF GJM0225C1C6R6BB01#

±0.25pF GJM0225C1C6R6CB01#

±0.5pF GJM0225C1C6R6DB01#

6.7pF ±0.05pF GJM0225C1C6R7WB01#

±0.1pF GJM0225C1C6R7BB01#

±0.25pF GJM0225C1C6R7CB01#

±0.5pF GJM0225C1C6R7DB01#

6.8pF ±0.05pF GJM0225C1C6R8WB01#

±0.1pF GJM0225C1C6R8BB01#

±0.25pF GJM0225C1C6R8CB01#

±0.5pF GJM0225C1C6R8DB01#

6.9pF ±0.05pF GJM0225C1C6R9WB01#

±0.1pF GJM0225C1C6R9BB01#

±0.25pF GJM0225C1C6R9CB01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 6.9pF ±0.5pF GJM0225C1C6R9DB01#

7.0pF ±0.05pF GJM0225C1C7R0WB01#

±0.1pF GJM0225C1C7R0BB01#

±0.25pF GJM0225C1C7R0CB01#

±0.5pF GJM0225C1C7R0DB01#

7.1pF ±0.05pF GJM0225C1C7R1WB01#

±0.1pF GJM0225C1C7R1BB01#

±0.25pF GJM0225C1C7R1CB01#

±0.5pF GJM0225C1C7R1DB01#

7.2pF ±0.05pF GJM0225C1C7R2WB01#

±0.1pF GJM0225C1C7R2BB01#

±0.25pF GJM0225C1C7R2CB01#

±0.5pF GJM0225C1C7R2DB01#

7.3pF ±0.05pF GJM0225C1C7R3WB01#

±0.1pF GJM0225C1C7R3BB01#

±0.25pF GJM0225C1C7R3CB01#

±0.5pF GJM0225C1C7R3DB01#

7.4pF ±0.05pF GJM0225C1C7R4WB01#

±0.1pF GJM0225C1C7R4BB01#

±0.25pF GJM0225C1C7R4CB01#

±0.5pF GJM0225C1C7R4DB01#

7.5pF ±0.05pF GJM0225C1C7R5WB01#

±0.1pF GJM0225C1C7R5BB01#

±0.25pF GJM0225C1C7R5CB01#

±0.5pF GJM0225C1C7R5DB01#

7.6pF ±0.05pF GJM0225C1C7R6WB01#

±0.1pF GJM0225C1C7R6BB01#

±0.25pF GJM0225C1C7R6CB01#

±0.5pF GJM0225C1C7R6DB01#

7.7pF ±0.05pF GJM0225C1C7R7WB01#

±0.1pF GJM0225C1C7R7BB01#

±0.25pF GJM0225C1C7R7CB01#

±0.5pF GJM0225C1C7R7DB01#

7.8pF ±0.05pF GJM0225C1C7R8WB01#

±0.1pF GJM0225C1C7R8BB01#

±0.25pF GJM0225C1C7R8CB01#

±0.5pF GJM0225C1C7R8DB01#

7.9pF ±0.05pF GJM0225C1C7R9WB01#

±0.1pF GJM0225C1C7R9BB01#

±0.25pF GJM0225C1C7R9CB01#

±0.5pF GJM0225C1C7R9DB01#

8.0pF ±0.05pF GJM0225C1C8R0WB01#

±0.1pF GJM0225C1C8R0BB01#

±0.25pF GJM0225C1C8R0CB01#

±0.5pF GJM0225C1C8R0DB01#

8.1pF ±0.05pF GJM0225C1C8R1WB01#

±0.1pF GJM0225C1C8R1BB01#

±0.25pF GJM0225C1C8R1CB01#

±0.5pF GJM0225C1C8R1DB01#

8.2pF ±0.05pF GJM0225C1C8R2WB01#

±0.1pF GJM0225C1C8R2BB01#

±0.25pF GJM0225C1C8R2CB01#

±0.5pF GJM0225C1C8R2DB01#

8.3pF ±0.05pF GJM0225C1C8R3WB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 8.3pF ±0.1pF GJM0225C1C8R3BB01#

±0.25pF GJM0225C1C8R3CB01#

±0.5pF GJM0225C1C8R3DB01#

8.4pF ±0.05pF GJM0225C1C8R4WB01#

±0.1pF GJM0225C1C8R4BB01#

±0.25pF GJM0225C1C8R4CB01#

±0.5pF GJM0225C1C8R4DB01#

8.5pF ±0.05pF GJM0225C1C8R5WB01#

±0.1pF GJM0225C1C8R5BB01#

±0.25pF GJM0225C1C8R5CB01#

±0.5pF GJM0225C1C8R5DB01#

8.6pF ±0.05pF GJM0225C1C8R6WB01#

±0.1pF GJM0225C1C8R6BB01#

±0.25pF GJM0225C1C8R6CB01#

±0.5pF GJM0225C1C8R6DB01#

8.7pF ±0.05pF GJM0225C1C8R7WB01#

±0.1pF GJM0225C1C8R7BB01#

±0.25pF GJM0225C1C8R7CB01#

±0.5pF GJM0225C1C8R7DB01#

8.8pF ±0.05pF GJM0225C1C8R8WB01#

±0.1pF GJM0225C1C8R8BB01#

±0.25pF GJM0225C1C8R8CB01#

±0.5pF GJM0225C1C8R8DB01#

8.9pF ±0.05pF GJM0225C1C8R9WB01#

±0.1pF GJM0225C1C8R9BB01#

±0.25pF GJM0225C1C8R9CB01#

±0.5pF GJM0225C1C8R9DB01#

9.0pF ±0.05pF GJM0225C1C9R0WB01#

±0.1pF GJM0225C1C9R0BB01#

±0.25pF GJM0225C1C9R0CB01#

±0.5pF GJM0225C1C9R0DB01#

9.1pF ±0.05pF GJM0225C1C9R1WB01#

±0.1pF GJM0225C1C9R1BB01#

±0.25pF GJM0225C1C9R1CB01#

±0.5pF GJM0225C1C9R1DB01#

9.2pF ±0.05pF GJM0225C1C9R2WB01#

±0.1pF GJM0225C1C9R2BB01#

±0.25pF GJM0225C1C9R2CB01#

±0.5pF GJM0225C1C9R2DB01#

9.3pF ±0.05pF GJM0225C1C9R3WB01#

±0.1pF GJM0225C1C9R3BB01#

±0.25pF GJM0225C1C9R3CB01#

±0.5pF GJM0225C1C9R3DB01#

9.4pF ±0.05pF GJM0225C1C9R4WB01#

±0.1pF GJM0225C1C9R4BB01#

±0.25pF GJM0225C1C9R4CB01#

±0.5pF GJM0225C1C9R4DB01#

9.5pF ±0.05pF GJM0225C1C9R5WB01#

±0.1pF GJM0225C1C9R5BB01#

±0.25pF GJM0225C1C9R5CB01#

±0.5pF GJM0225C1C9R5DB01#

9.6pF ±0.05pF GJM0225C1C9R6WB01#

±0.1pF GJM0225C1C9R6BB01#

±0.25pF GJM0225C1C9R6CB01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc C0G 9.6pF ±0.5pF GJM0225C1C9R6DB01#

9.7pF ±0.05pF GJM0225C1C9R7WB01#

±0.1pF GJM0225C1C9R7BB01#

±0.25pF GJM0225C1C9R7CB01#

±0.5pF GJM0225C1C9R7DB01#

9.8pF ±0.05pF GJM0225C1C9R8WB01#

±0.1pF GJM0225C1C9R8BB01#

±0.25pF GJM0225C1C9R8CB01#

±0.5pF GJM0225C1C9R8DB01#

9.9pF ±0.05pF GJM0225C1C9R9WB01#

±0.1pF GJM0225C1C9R9BB01#

±0.25pF GJM0225C1C9R9CB01#

±0.5pF GJM0225C1C9R9DB01#

10pF ±2% GJM0225C1C100GB01#

±5% GJM0225C1C100JB01#

CK 0.2pF ±0.05pF GJM0224C1CR20WB01#

±0.1pF GJM0224C1CR20BB01#

0.3pF ±0.05pF GJM0224C1CR30WB01#

±0.1pF GJM0224C1CR30BB01#

0.4pF ±0.05pF GJM0224C1CR40WB01#

±0.1pF GJM0224C1CR40BB01#

0.5pF ±0.05pF GJM0224C1CR50WB01#

±0.1pF GJM0224C1CR50BB01#

0.6pF ±0.05pF GJM0224C1CR60WB01#

±0.1pF GJM0224C1CR60BB01#

0.7pF ±0.05pF GJM0224C1CR70WB01#

±0.1pF GJM0224C1CR70BB01#

0.8pF ±0.05pF GJM0224C1CR80WB01#

±0.1pF GJM0224C1CR80BB01#

0.9pF ±0.05pF GJM0224C1CR90WB01#

±0.1pF GJM0224C1CR90BB01#

1.0pF ±0.05pF GJM0224C1C1R0WB01#

±0.1pF GJM0224C1C1R0BB01#

±0.25pF GJM0224C1C1R0CB01#

1.1pF ±0.05pF GJM0224C1C1R1WB01#

±0.1pF GJM0224C1C1R1BB01#

±0.25pF GJM0224C1C1R1CB01#

1.2pF ±0.05pF GJM0224C1C1R2WB01#

±0.1pF GJM0224C1C1R2BB01#

±0.25pF GJM0224C1C1R2CB01#

1.3pF ±0.05pF GJM0224C1C1R3WB01#

±0.1pF GJM0224C1C1R3BB01#

±0.25pF GJM0224C1C1R3CB01#

1.4pF ±0.05pF GJM0224C1C1R4WB01#

±0.1pF GJM0224C1C1R4BB01#

±0.25pF GJM0224C1C1R4CB01#

1.5pF ±0.05pF GJM0224C1C1R5WB01#

±0.1pF GJM0224C1C1R5BB01#

±0.25pF GJM0224C1C1R5CB01#

1.6pF ±0.05pF GJM0224C1C1R6WB01#

±0.1pF GJM0224C1C1R6BB01#

±0.25pF GJM0224C1C1R6CB01#

1.7pF ±0.05pF GJM0224C1C1R7WB01#

±0.1pF GJM0224C1C1R7BB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CK 1.7pF ±0.25pF GJM0224C1C1R7CB01#

1.8pF ±0.05pF GJM0224C1C1R8WB01#

±0.1pF GJM0224C1C1R8BB01#

±0.25pF GJM0224C1C1R8CB01#

1.9pF ±0.05pF GJM0224C1C1R9WB01#

±0.1pF GJM0224C1C1R9BB01#

±0.25pF GJM0224C1C1R9CB01#

2.0pF ±0.05pF GJM0224C1C2R0WB01#

±0.1pF GJM0224C1C2R0BB01#

±0.25pF GJM0224C1C2R0CB01#

CJ 2.1pF ±0.05pF GJM0223C1C2R1WB01#

±0.1pF GJM0223C1C2R1BB01#

±0.25pF GJM0223C1C2R1CB01#

2.2pF ±0.05pF GJM0223C1C2R2WB01#

±0.1pF GJM0223C1C2R2BB01#

±0.25pF GJM0223C1C2R2CB01#

2.3pF ±0.05pF GJM0223C1C2R3WB01#

±0.1pF GJM0223C1C2R3BB01#

±0.25pF GJM0223C1C2R3CB01#

2.4pF ±0.05pF GJM0223C1C2R4WB01#

±0.1pF GJM0223C1C2R4BB01#

±0.25pF GJM0223C1C2R4CB01#

2.5pF ±0.05pF GJM0223C1C2R5WB01#

±0.1pF GJM0223C1C2R5BB01#

±0.25pF GJM0223C1C2R5CB01#

2.6pF ±0.05pF GJM0223C1C2R6WB01#

±0.1pF GJM0223C1C2R6BB01#

±0.25pF GJM0223C1C2R6CB01#

2.7pF ±0.05pF GJM0223C1C2R7WB01#

±0.1pF GJM0223C1C2R7BB01#

±0.25pF GJM0223C1C2R7CB01#

2.8pF ±0.05pF GJM0223C1C2R8WB01#

±0.1pF GJM0223C1C2R8BB01#

±0.25pF GJM0223C1C2R8CB01#

2.9pF ±0.05pF GJM0223C1C2R9WB01#

±0.1pF GJM0223C1C2R9BB01#

±0.25pF GJM0223C1C2R9CB01#

3.0pF ±0.05pF GJM0223C1C3R0WB01#

±0.1pF GJM0223C1C3R0BB01#

±0.25pF GJM0223C1C3R0CB01#

3.1pF ±0.05pF GJM0223C1C3R1WB01#

±0.1pF GJM0223C1C3R1BB01#

±0.25pF GJM0223C1C3R1CB01#

3.2pF ±0.05pF GJM0223C1C3R2WB01#

±0.1pF GJM0223C1C3R2BB01#

±0.25pF GJM0223C1C3R2CB01#

3.3pF ±0.05pF GJM0223C1C3R3WB01#

±0.1pF GJM0223C1C3R3BB01#

±0.25pF GJM0223C1C3R3CB01#

3.4pF ±0.05pF GJM0223C1C3R4WB01#

±0.1pF GJM0223C1C3R4BB01#

±0.25pF GJM0223C1C3R4CB01#

3.5pF ±0.05pF GJM0223C1C3R5WB01#

±0.1pF GJM0223C1C3R5BB01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CJ 3.5pF ±0.25pF GJM0223C1C3R5CB01#

3.6pF ±0.05pF GJM0223C1C3R6WB01#

±0.1pF GJM0223C1C3R6BB01#

±0.25pF GJM0223C1C3R6CB01#

3.7pF ±0.05pF GJM0223C1C3R7WB01#

±0.1pF GJM0223C1C3R7BB01#

±0.25pF GJM0223C1C3R7CB01#

3.8pF ±0.05pF GJM0223C1C3R8WB01#

±0.1pF GJM0223C1C3R8BB01#

±0.25pF GJM0223C1C3R8CB01#

3.9pF ±0.05pF GJM0223C1C3R9WB01#

±0.1pF GJM0223C1C3R9BB01#

±0.25pF GJM0223C1C3R9CB01#

CH 4.0pF ±0.05pF GJM0222C1C4R0WB01#

±0.1pF GJM0222C1C4R0BB01#

±0.25pF GJM0222C1C4R0CB01#

4.1pF ±0.05pF GJM0222C1C4R1WB01#

±0.1pF GJM0222C1C4R1BB01#

±0.25pF GJM0222C1C4R1CB01#

4.2pF ±0.05pF GJM0222C1C4R2WB01#

±0.1pF GJM0222C1C4R2BB01#

±0.25pF GJM0222C1C4R2CB01#

4.3pF ±0.05pF GJM0222C1C4R3WB01#

±0.1pF GJM0222C1C4R3BB01#

±0.25pF GJM0222C1C4R3CB01#

4.4pF ±0.05pF GJM0222C1C4R4WB01#

±0.1pF GJM0222C1C4R4BB01#

±0.25pF GJM0222C1C4R4CB01#

4.5pF ±0.05pF GJM0222C1C4R5WB01#

±0.1pF GJM0222C1C4R5BB01#

±0.25pF GJM0222C1C4R5CB01#

4.6pF ±0.05pF GJM0222C1C4R6WB01#

±0.1pF GJM0222C1C4R6BB01#

±0.25pF GJM0222C1C4R6CB01#

4.7pF ±0.05pF GJM0222C1C4R7WB01#

±0.1pF GJM0222C1C4R7BB01#

±0.25pF GJM0222C1C4R7CB01#

4.8pF ±0.05pF GJM0222C1C4R8WB01#

±0.1pF GJM0222C1C4R8BB01#

±0.25pF GJM0222C1C4R8CB01#

4.9pF ±0.05pF GJM0222C1C4R9WB01#

±0.1pF GJM0222C1C4R9BB01#

±0.25pF GJM0222C1C4R9CB01#

5.0pF ±0.05pF GJM0222C1C5R0WB01#

±0.1pF GJM0222C1C5R0BB01#

±0.25pF GJM0222C1C5R0CB01#

5.1pF ±0.05pF GJM0222C1C5R1WB01#

±0.1pF GJM0222C1C5R1BB01#

±0.25pF GJM0222C1C5R1CB01#

±0.5pF GJM0222C1C5R1DB01#

5.2pF ±0.05pF GJM0222C1C5R2WB01#

±0.1pF GJM0222C1C5R2BB01#

±0.25pF GJM0222C1C5R2CB01#

±0.5pF GJM0222C1C5R2DB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 5.3pF ±0.05pF GJM0222C1C5R3WB01#

±0.1pF GJM0222C1C5R3BB01#

±0.25pF GJM0222C1C5R3CB01#

±0.5pF GJM0222C1C5R3DB01#

5.4pF ±0.05pF GJM0222C1C5R4WB01#

±0.1pF GJM0222C1C5R4BB01#

±0.25pF GJM0222C1C5R4CB01#

±0.5pF GJM0222C1C5R4DB01#

5.5pF ±0.05pF GJM0222C1C5R5WB01#

±0.1pF GJM0222C1C5R5BB01#

±0.25pF GJM0222C1C5R5CB01#

±0.5pF GJM0222C1C5R5DB01#

5.6pF ±0.05pF GJM0222C1C5R6WB01#

±0.1pF GJM0222C1C5R6BB01#

±0.25pF GJM0222C1C5R6CB01#

±0.5pF GJM0222C1C5R6DB01#

5.7pF ±0.05pF GJM0222C1C5R7WB01#

±0.1pF GJM0222C1C5R7BB01#

±0.25pF GJM0222C1C5R7CB01#

±0.5pF GJM0222C1C5R7DB01#

5.8pF ±0.05pF GJM0222C1C5R8WB01#

±0.1pF GJM0222C1C5R8BB01#

±0.25pF GJM0222C1C5R8CB01#

±0.5pF GJM0222C1C5R8DB01#

5.9pF ±0.05pF GJM0222C1C5R9WB01#

±0.1pF GJM0222C1C5R9BB01#

±0.25pF GJM0222C1C5R9CB01#

±0.5pF GJM0222C1C5R9DB01#

6.0pF ±0.05pF GJM0222C1C6R0WB01#

±0.1pF GJM0222C1C6R0BB01#

±0.25pF GJM0222C1C6R0CB01#

±0.5pF GJM0222C1C6R0DB01#

6.1pF ±0.05pF GJM0222C1C6R1WB01#

±0.1pF GJM0222C1C6R1BB01#

±0.25pF GJM0222C1C6R1CB01#

±0.5pF GJM0222C1C6R1DB01#

6.2pF ±0.05pF GJM0222C1C6R2WB01#

±0.1pF GJM0222C1C6R2BB01#

±0.25pF GJM0222C1C6R2CB01#

±0.5pF GJM0222C1C6R2DB01#

6.3pF ±0.05pF GJM0222C1C6R3WB01#

±0.1pF GJM0222C1C6R3BB01#

±0.25pF GJM0222C1C6R3CB01#

±0.5pF GJM0222C1C6R3DB01#

6.4pF ±0.05pF GJM0222C1C6R4WB01#

±0.1pF GJM0222C1C6R4BB01#

±0.25pF GJM0222C1C6R4CB01#

±0.5pF GJM0222C1C6R4DB01#

6.5pF ±0.05pF GJM0222C1C6R5WB01#

±0.1pF GJM0222C1C6R5BB01#

±0.25pF GJM0222C1C6R5CB01#

±0.5pF GJM0222C1C6R5DB01#

6.6pF ±0.05pF GJM0222C1C6R6WB01#

±0.1pF GJM0222C1C6R6BB01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 6.6pF ±0.25pF GJM0222C1C6R6CB01#

±0.5pF GJM0222C1C6R6DB01#

6.7pF ±0.05pF GJM0222C1C6R7WB01#

±0.1pF GJM0222C1C6R7BB01#

±0.25pF GJM0222C1C6R7CB01#

±0.5pF GJM0222C1C6R7DB01#

6.8pF ±0.05pF GJM0222C1C6R8WB01#

±0.1pF GJM0222C1C6R8BB01#

±0.25pF GJM0222C1C6R8CB01#

±0.5pF GJM0222C1C6R8DB01#

6.9pF ±0.05pF GJM0222C1C6R9WB01#

±0.1pF GJM0222C1C6R9BB01#

±0.25pF GJM0222C1C6R9CB01#

±0.5pF GJM0222C1C6R9DB01#

7.0pF ±0.05pF GJM0222C1C7R0WB01#

±0.1pF GJM0222C1C7R0BB01#

±0.25pF GJM0222C1C7R0CB01#

±0.5pF GJM0222C1C7R0DB01#

7.1pF ±0.05pF GJM0222C1C7R1WB01#

±0.1pF GJM0222C1C7R1BB01#

±0.25pF GJM0222C1C7R1CB01#

±0.5pF GJM0222C1C7R1DB01#

7.2pF ±0.05pF GJM0222C1C7R2WB01#

±0.1pF GJM0222C1C7R2BB01#

±0.25pF GJM0222C1C7R2CB01#

±0.5pF GJM0222C1C7R2DB01#

7.3pF ±0.05pF GJM0222C1C7R3WB01#

±0.1pF GJM0222C1C7R3BB01#

±0.25pF GJM0222C1C7R3CB01#

±0.5pF GJM0222C1C7R3DB01#

7.4pF ±0.05pF GJM0222C1C7R4WB01#

±0.1pF GJM0222C1C7R4BB01#

±0.25pF GJM0222C1C7R4CB01#

±0.5pF GJM0222C1C7R4DB01#

7.5pF ±0.05pF GJM0222C1C7R5WB01#

±0.1pF GJM0222C1C7R5BB01#

±0.25pF GJM0222C1C7R5CB01#

±0.5pF GJM0222C1C7R5DB01#

7.6pF ±0.05pF GJM0222C1C7R6WB01#

±0.1pF GJM0222C1C7R6BB01#

±0.25pF GJM0222C1C7R6CB01#

±0.5pF GJM0222C1C7R6DB01#

7.7pF ±0.05pF GJM0222C1C7R7WB01#

±0.1pF GJM0222C1C7R7BB01#

±0.25pF GJM0222C1C7R7CB01#

±0.5pF GJM0222C1C7R7DB01#

7.8pF ±0.05pF GJM0222C1C7R8WB01#

±0.1pF GJM0222C1C7R8BB01#

±0.25pF GJM0222C1C7R8CB01#

±0.5pF GJM0222C1C7R8DB01#

7.9pF ±0.05pF GJM0222C1C7R9WB01#

±0.1pF GJM0222C1C7R9BB01#

±0.25pF GJM0222C1C7R9CB01#

±0.5pF GJM0222C1C7R9DB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 8.0pF ±0.05pF GJM0222C1C8R0WB01#

±0.1pF GJM0222C1C8R0BB01#

±0.25pF GJM0222C1C8R0CB01#

±0.5pF GJM0222C1C8R0DB01#

8.1pF ±0.05pF GJM0222C1C8R1WB01#

±0.1pF GJM0222C1C8R1BB01#

±0.25pF GJM0222C1C8R1CB01#

±0.5pF GJM0222C1C8R1DB01#

8.2pF ±0.05pF GJM0222C1C8R2WB01#

±0.1pF GJM0222C1C8R2BB01#

±0.25pF GJM0222C1C8R2CB01#

±0.5pF GJM0222C1C8R2DB01#

8.3pF ±0.05pF GJM0222C1C8R3WB01#

±0.1pF GJM0222C1C8R3BB01#

±0.25pF GJM0222C1C8R3CB01#

±0.5pF GJM0222C1C8R3DB01#

8.4pF ±0.05pF GJM0222C1C8R4WB01#

±0.1pF GJM0222C1C8R4BB01#

±0.25pF GJM0222C1C8R4CB01#

±0.5pF GJM0222C1C8R4DB01#

8.5pF ±0.05pF GJM0222C1C8R5WB01#

±0.1pF GJM0222C1C8R5BB01#

±0.25pF GJM0222C1C8R5CB01#

±0.5pF GJM0222C1C8R5DB01#

8.6pF ±0.05pF GJM0222C1C8R6WB01#

±0.1pF GJM0222C1C8R6BB01#

±0.25pF GJM0222C1C8R6CB01#

±0.5pF GJM0222C1C8R6DB01#

8.7pF ±0.05pF GJM0222C1C8R7WB01#

±0.1pF GJM0222C1C8R7BB01#

±0.25pF GJM0222C1C8R7CB01#

±0.5pF GJM0222C1C8R7DB01#

8.8pF ±0.05pF GJM0222C1C8R8WB01#

±0.1pF GJM0222C1C8R8BB01#

±0.25pF GJM0222C1C8R8CB01#

±0.5pF GJM0222C1C8R8DB01#

8.9pF ±0.05pF GJM0222C1C8R9WB01#

±0.1pF GJM0222C1C8R9BB01#

±0.25pF GJM0222C1C8R9CB01#

±0.5pF GJM0222C1C8R9DB01#

9.0pF ±0.05pF GJM0222C1C9R0WB01#

±0.1pF GJM0222C1C9R0BB01#

±0.25pF GJM0222C1C9R0CB01#

±0.5pF GJM0222C1C9R0DB01#

9.1pF ±0.05pF GJM0222C1C9R1WB01#

±0.1pF GJM0222C1C9R1BB01#

±0.25pF GJM0222C1C9R1CB01#

±0.5pF GJM0222C1C9R1DB01#

9.2pF ±0.05pF GJM0222C1C9R2WB01#

±0.1pF GJM0222C1C9R2BB01#

±0.25pF GJM0222C1C9R2CB01#

±0.5pF GJM0222C1C9R2DB01#

9.3pF ±0.05pF GJM0222C1C9R3WB01#

±0.1pF GJM0222C1C9R3BB01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.22mm 16Vdc CH 9.3pF ±0.25pF GJM0222C1C9R3CB01#

±0.5pF GJM0222C1C9R3DB01#

9.4pF ±0.05pF GJM0222C1C9R4WB01#

±0.1pF GJM0222C1C9R4BB01#

±0.25pF GJM0222C1C9R4CB01#

±0.5pF GJM0222C1C9R4DB01#

9.5pF ±0.05pF GJM0222C1C9R5WB01#

±0.1pF GJM0222C1C9R5BB01#

±0.25pF GJM0222C1C9R5CB01#

±0.5pF GJM0222C1C9R5DB01#

9.6pF ±0.05pF GJM0222C1C9R6WB01#

±0.1pF GJM0222C1C9R6BB01#

±0.25pF GJM0222C1C9R6CB01#

±0.5pF GJM0222C1C9R6DB01#

9.7pF ±0.05pF GJM0222C1C9R7WB01#

±0.1pF GJM0222C1C9R7BB01#

±0.25pF GJM0222C1C9R7CB01#

±0.5pF GJM0222C1C9R7DB01#

9.8pF ±0.05pF GJM0222C1C9R8WB01#

±0.1pF GJM0222C1C9R8BB01#

±0.25pF GJM0222C1C9R8CB01#

±0.5pF GJM0222C1C9R8DB01#

9.9pF ±0.05pF GJM0222C1C9R9WB01#

±0.1pF GJM0222C1C9R9BB01#

±0.25pF GJM0222C1C9R9CB01#

±0.5pF GJM0222C1C9R9DB01#

10pF ±2% GJM0222C1C100GB01#

±5% GJM0222C1C100JB01#

GJM Series Temperature Compensating Type HiQ Part Number List

c 0.6×0.3mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0G 0.2pF ±0.05pF GJM0335C1ER20WB01#

±0.1pF GJM0335C1ER20BB01#

0.3pF ±0.05pF GJM0335C1ER30WB01#

±0.1pF GJM0335C1ER30BB01#

0.4pF ±0.05pF GJM0335C1ER40WB01#

±0.1pF GJM0335C1ER40BB01#

0.5pF ±0.05pF GJM0335C1ER50WB01#

±0.1pF GJM0335C1ER50BB01#

0.6pF ±0.05pF GJM0335C1ER60WB01#

±0.1pF GJM0335C1ER60BB01#

0.7pF ±0.05pF GJM0335C1ER70WB01#

±0.1pF GJM0335C1ER70BB01#

0.8pF ±0.05pF GJM0335C1ER80WB01#

±0.1pF GJM0335C1ER80BB01#

0.9pF ±0.05pF GJM0335C1ER90WB01#

±0.1pF GJM0335C1ER90BB01#

1.0pF ±0.05pF GJM0335C1E1R0WB01#

±0.1pF GJM0335C1E1R0BB01#

±0.25pF GJM0335C1E1R0CB01#

1.1pF ±0.05pF GJM0335C1E1R1WB01#

±0.1pF GJM0335C1E1R1BB01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0G 1.1pF ±0.25pF GJM0335C1E1R1CB01#

1.2pF ±0.05pF GJM0335C1E1R2WB01#

±0.1pF GJM0335C1E1R2BB01#

±0.25pF GJM0335C1E1R2CB01#

1.3pF ±0.05pF GJM0335C1E1R3WB01#

±0.1pF GJM0335C1E1R3BB01#

±0.25pF GJM0335C1E1R3CB01#

1.4pF ±0.05pF GJM0335C1E1R4WB01#

±0.1pF GJM0335C1E1R4BB01#

±0.25pF GJM0335C1E1R4CB01#

1.5pF ±0.05pF GJM0335C1E1R5WB01#

±0.1pF GJM0335C1E1R5BB01#

±0.25pF GJM0335C1E1R5CB01#

1.6pF ±0.05pF GJM0335C1E1R6WB01#

±0.1pF GJM0335C1E1R6BB01#

±0.25pF GJM0335C1E1R6CB01#

1.7pF ±0.05pF GJM0335C1E1R7WB01#

±0.1pF GJM0335C1E1R7BB01#

±0.25pF GJM0335C1E1R7CB01#

1.8pF ±0.05pF GJM0335C1E1R8WB01#

±0.1pF GJM0335C1E1R8BB01#

±0.25pF GJM0335C1E1R8CB01#

1.9pF ±0.05pF GJM0335C1E1R9WB01#

±0.1pF GJM0335C1E1R9BB01#

±0.25pF GJM0335C1E1R9CB01#

2.0pF ±0.05pF GJM0335C1E2R0WB01#

±0.1pF GJM0335C1E2R0BB01#

±0.25pF GJM0335C1E2R0CB01#

2.1pF ±0.05pF GJM0335C1E2R1WB01#

±0.1pF GJM0335C1E2R1BB01#

±0.25pF GJM0335C1E2R1CB01#

2.2pF ±0.05pF GJM0335C1E2R2WB01#

±0.1pF GJM0335C1E2R2BB01#

±0.25pF GJM0335C1E2R2CB01#

2.3pF ±0.05pF GJM0335C1E2R3WB01#

±0.1pF GJM0335C1E2R3BB01#

±0.25pF GJM0335C1E2R3CB01#

2.4pF ±0.05pF GJM0335C1E2R4WB01#

±0.1pF GJM0335C1E2R4BB01#

±0.25pF GJM0335C1E2R4CB01#

2.5pF ±0.05pF GJM0335C1E2R5WB01#

±0.1pF GJM0335C1E2R5BB01#

±0.25pF GJM0335C1E2R5CB01#

2.6pF ±0.05pF GJM0335C1E2R6WB01#

±0.1pF GJM0335C1E2R6BB01#

±0.25pF GJM0335C1E2R6CB01#

2.7pF ±0.05pF GJM0335C1E2R7WB01#

±0.1pF GJM0335C1E2R7BB01#

±0.25pF GJM0335C1E2R7CB01#

2.8pF ±0.05pF GJM0335C1E2R8WB01#

±0.1pF GJM0335C1E2R8BB01#

±0.25pF GJM0335C1E2R8CB01#

2.9pF ±0.05pF GJM0335C1E2R9WB01#

±0.1pF GJM0335C1E2R9BB01#

(→ c 0.4×0.2mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0G 2.9pF ±0.25pF GJM0335C1E2R9CB01#

3.0pF ±0.05pF GJM0335C1E3R0WB01#

±0.1pF GJM0335C1E3R0BB01#

±0.25pF GJM0335C1E3R0CB01#

3.1pF ±0.05pF GJM0335C1E3R1WB01#

±0.1pF GJM0335C1E3R1BB01#

±0.25pF GJM0335C1E3R1CB01#

3.2pF ±0.05pF GJM0335C1E3R2WB01#

±0.1pF GJM0335C1E3R2BB01#

±0.25pF GJM0335C1E3R2CB01#

3.3pF ±0.05pF GJM0335C1E3R3WB01#

±0.1pF GJM0335C1E3R3BB01#

±0.25pF GJM0335C1E3R3CB01#

3.4pF ±0.05pF GJM0335C1E3R4WB01#

±0.1pF GJM0335C1E3R4BB01#

±0.25pF GJM0335C1E3R4CB01#

3.5pF ±0.05pF GJM0335C1E3R5WB01#

±0.1pF GJM0335C1E3R5BB01#

±0.25pF GJM0335C1E3R5CB01#

3.6pF ±0.05pF GJM0335C1E3R6WB01#

±0.1pF GJM0335C1E3R6BB01#

±0.25pF GJM0335C1E3R6CB01#

3.7pF ±0.05pF GJM0335C1E3R7WB01#

±0.1pF GJM0335C1E3R7BB01#

±0.25pF GJM0335C1E3R7CB01#

3.8pF ±0.05pF GJM0335C1E3R8WB01#

±0.1pF GJM0335C1E3R8BB01#

±0.25pF GJM0335C1E3R8CB01#

3.9pF ±0.05pF GJM0335C1E3R9WB01#

±0.1pF GJM0335C1E3R9BB01#

±0.25pF GJM0335C1E3R9CB01#

4.0pF ±0.05pF GJM0335C1E4R0WB01#

±0.1pF GJM0335C1E4R0BB01#

±0.25pF GJM0335C1E4R0CB01#

4.1pF ±0.05pF GJM0335C1E4R1WB01#

±0.1pF GJM0335C1E4R1BB01#

±0.25pF GJM0335C1E4R1CB01#

4.2pF ±0.05pF GJM0335C1E4R2WB01#

±0.1pF GJM0335C1E4R2BB01#

±0.25pF GJM0335C1E4R2CB01#

4.3pF ±0.05pF GJM0335C1E4R3WB01#

±0.1pF GJM0335C1E4R3BB01#

±0.25pF GJM0335C1E4R3CB01#

4.4pF ±0.05pF GJM0335C1E4R4WB01#

±0.1pF GJM0335C1E4R4BB01#

±0.25pF GJM0335C1E4R4CB01#

4.5pF ±0.05pF GJM0335C1E4R5WB01#

±0.1pF GJM0335C1E4R5BB01#

±0.25pF GJM0335C1E4R5CB01#

4.6pF ±0.05pF GJM0335C1E4R6WB01#

±0.1pF GJM0335C1E4R6BB01#

±0.25pF GJM0335C1E4R6CB01#

4.7pF ±0.05pF GJM0335C1E4R7WB01#

±0.1pF GJM0335C1E4R7BB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0G 4.7pF ±0.25pF GJM0335C1E4R7CB01#

4.8pF ±0.05pF GJM0335C1E4R8WB01#

±0.1pF GJM0335C1E4R8BB01#

±0.25pF GJM0335C1E4R8CB01#

4.9pF ±0.05pF GJM0335C1E4R9WB01#

±0.1pF GJM0335C1E4R9BB01#

±0.25pF GJM0335C1E4R9CB01#

5.0pF ±0.05pF GJM0335C1E5R0WB01#

±0.1pF GJM0335C1E5R0BB01#

±0.25pF GJM0335C1E5R0CB01#

5.1pF ±0.05pF GJM0335C1E5R1WB01#

±0.1pF GJM0335C1E5R1BB01#

±0.25pF GJM0335C1E5R1CB01#

±0.5pF GJM0335C1E5R1DB01#

5.2pF ±0.05pF GJM0335C1E5R2WB01#

±0.1pF GJM0335C1E5R2BB01#

±0.25pF GJM0335C1E5R2CB01#

±0.5pF GJM0335C1E5R2DB01#

5.3pF ±0.05pF GJM0335C1E5R3WB01#

±0.1pF GJM0335C1E5R3BB01#

±0.25pF GJM0335C1E5R3CB01#

±0.5pF GJM0335C1E5R3DB01#

5.4pF ±0.05pF GJM0335C1E5R4WB01#

±0.1pF GJM0335C1E5R4BB01#

±0.25pF GJM0335C1E5R4CB01#

±0.5pF GJM0335C1E5R4DB01#

5.5pF ±0.05pF GJM0335C1E5R5WB01#

±0.1pF GJM0335C1E5R5BB01#

±0.25pF GJM0335C1E5R5CB01#

±0.5pF GJM0335C1E5R5DB01#

5.6pF ±0.05pF GJM0335C1E5R6WB01#

±0.1pF GJM0335C1E5R6BB01#

±0.25pF GJM0335C1E5R6CB01#

±0.5pF GJM0335C1E5R6DB01#

5.7pF ±0.05pF GJM0335C1E5R7WB01#

±0.1pF GJM0335C1E5R7BB01#

±0.25pF GJM0335C1E5R7CB01#

±0.5pF GJM0335C1E5R7DB01#

5.8pF ±0.05pF GJM0335C1E5R8WB01#

±0.1pF GJM0335C1E5R8BB01#

±0.25pF GJM0335C1E5R8CB01#

±0.5pF GJM0335C1E5R8DB01#

5.9pF ±0.05pF GJM0335C1E5R9WB01#

±0.1pF GJM0335C1E5R9BB01#

±0.25pF GJM0335C1E5R9CB01#

±0.5pF GJM0335C1E5R9DB01#

6.0pF ±0.05pF GJM0335C1E6R0WB01#

±0.1pF GJM0335C1E6R0BB01#

±0.25pF GJM0335C1E6R0CB01#

±0.5pF GJM0335C1E6R0DB01#

6.1pF ±0.05pF GJM0335C1E6R1WB01#

±0.1pF GJM0335C1E6R1BB01#

±0.25pF GJM0335C1E6R1CB01#

±0.5pF GJM0335C1E6R1DB01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0G 6.2pF ±0.05pF GJM0335C1E6R2WB01#

±0.1pF GJM0335C1E6R2BB01#

±0.25pF GJM0335C1E6R2CB01#

±0.5pF GJM0335C1E6R2DB01#

6.3pF ±0.05pF GJM0335C1E6R3WB01#

±0.1pF GJM0335C1E6R3BB01#

±0.25pF GJM0335C1E6R3CB01#

±0.5pF GJM0335C1E6R3DB01#

6.4pF ±0.05pF GJM0335C1E6R4WB01#

±0.1pF GJM0335C1E6R4BB01#

±0.25pF GJM0335C1E6R4CB01#

±0.5pF GJM0335C1E6R4DB01#

6.5pF ±0.05pF GJM0335C1E6R5WB01#

±0.1pF GJM0335C1E6R5BB01#

±0.25pF GJM0335C1E6R5CB01#

±0.5pF GJM0335C1E6R5DB01#

6.6pF ±0.05pF GJM0335C1E6R6WB01#

±0.1pF GJM0335C1E6R6BB01#

±0.25pF GJM0335C1E6R6CB01#

±0.5pF GJM0335C1E6R6DB01#

6.7pF ±0.05pF GJM0335C1E6R7WB01#

±0.1pF GJM0335C1E6R7BB01#

±0.25pF GJM0335C1E6R7CB01#

±0.5pF GJM0335C1E6R7DB01#

6.8pF ±0.05pF GJM0335C1E6R8WB01#

±0.1pF GJM0335C1E6R8BB01#

±0.25pF GJM0335C1E6R8CB01#

±0.5pF GJM0335C1E6R8DB01#

C0H 6.9pF ±0.05pF GJM0336C1E6R9WB01#

±0.1pF GJM0336C1E6R9BB01#

±0.25pF GJM0336C1E6R9CB01#

±0.5pF GJM0336C1E6R9DB01#

7.0pF ±0.05pF GJM0336C1E7R0WB01#

±0.1pF GJM0336C1E7R0BB01#

±0.25pF GJM0336C1E7R0CB01#

±0.5pF GJM0336C1E7R0DB01#

7.1pF ±0.05pF GJM0336C1E7R1WB01#

±0.1pF GJM0336C1E7R1BB01#

±0.25pF GJM0336C1E7R1CB01#

±0.5pF GJM0336C1E7R1DB01#

7.2pF ±0.05pF GJM0336C1E7R2WB01#

±0.1pF GJM0336C1E7R2BB01#

±0.25pF GJM0336C1E7R2CB01#

±0.5pF GJM0336C1E7R2DB01#

7.3pF ±0.05pF GJM0336C1E7R3WB01#

±0.1pF GJM0336C1E7R3BB01#

±0.25pF GJM0336C1E7R3CB01#

±0.5pF GJM0336C1E7R3DB01#

7.4pF ±0.05pF GJM0336C1E7R4WB01#

±0.1pF GJM0336C1E7R4BB01#

±0.25pF GJM0336C1E7R4CB01#

±0.5pF GJM0336C1E7R4DB01#

7.5pF ±0.05pF GJM0336C1E7R5WB01#

±0.1pF GJM0336C1E7R5BB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0H 7.5pF ±0.25pF GJM0336C1E7R5CB01#

±0.5pF GJM0336C1E7R5DB01#

7.6pF ±0.05pF GJM0336C1E7R6WB01#

±0.1pF GJM0336C1E7R6BB01#

±0.25pF GJM0336C1E7R6CB01#

±0.5pF GJM0336C1E7R6DB01#

7.7pF ±0.05pF GJM0336C1E7R7WB01#

±0.1pF GJM0336C1E7R7BB01#

±0.25pF GJM0336C1E7R7CB01#

±0.5pF GJM0336C1E7R7DB01#

7.8pF ±0.05pF GJM0336C1E7R8WB01#

±0.1pF GJM0336C1E7R8BB01#

±0.25pF GJM0336C1E7R8CB01#

±0.5pF GJM0336C1E7R8DB01#

7.9pF ±0.05pF GJM0336C1E7R9WB01#

±0.1pF GJM0336C1E7R9BB01#

±0.25pF GJM0336C1E7R9CB01#

±0.5pF GJM0336C1E7R9DB01#

8.0pF ±0.05pF GJM0336C1E8R0WB01#

±0.1pF GJM0336C1E8R0BB01#

±0.25pF GJM0336C1E8R0CB01#

±0.5pF GJM0336C1E8R0DB01#

8.1pF ±0.05pF GJM0336C1E8R1WB01#

±0.1pF GJM0336C1E8R1BB01#

±0.25pF GJM0336C1E8R1CB01#

±0.5pF GJM0336C1E8R1DB01#

8.2pF ±0.05pF GJM0336C1E8R2WB01#

±0.1pF GJM0336C1E8R2BB01#

±0.25pF GJM0336C1E8R2CB01#

±0.5pF GJM0336C1E8R2DB01#

8.3pF ±0.05pF GJM0336C1E8R3WB01#

±0.1pF GJM0336C1E8R3BB01#

±0.25pF GJM0336C1E8R3CB01#

±0.5pF GJM0336C1E8R3DB01#

8.4pF ±0.05pF GJM0336C1E8R4WB01#

±0.1pF GJM0336C1E8R4BB01#

±0.25pF GJM0336C1E8R4CB01#

±0.5pF GJM0336C1E8R4DB01#

8.5pF ±0.05pF GJM0336C1E8R5WB01#

±0.1pF GJM0336C1E8R5BB01#

±0.25pF GJM0336C1E8R5CB01#

±0.5pF GJM0336C1E8R5DB01#

8.6pF ±0.05pF GJM0336C1E8R6WB01#

±0.1pF GJM0336C1E8R6BB01#

±0.25pF GJM0336C1E8R6CB01#

±0.5pF GJM0336C1E8R6DB01#

8.7pF ±0.05pF GJM0336C1E8R7WB01#

±0.1pF GJM0336C1E8R7BB01#

±0.25pF GJM0336C1E8R7CB01#

±0.5pF GJM0336C1E8R7DB01#

8.8pF ±0.05pF GJM0336C1E8R8WB01#

±0.1pF GJM0336C1E8R8BB01#

±0.25pF GJM0336C1E8R8CB01#

±0.5pF GJM0336C1E8R8DB01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0H 8.9pF ±0.05pF GJM0336C1E8R9WB01#

±0.1pF GJM0336C1E8R9BB01#

±0.25pF GJM0336C1E8R9CB01#

±0.5pF GJM0336C1E8R9DB01#

9.0pF ±0.05pF GJM0336C1E9R0WB01#

±0.1pF GJM0336C1E9R0BB01#

±0.25pF GJM0336C1E9R0CB01#

±0.5pF GJM0336C1E9R0DB01#

9.1pF ±0.05pF GJM0336C1E9R1WB01#

±0.1pF GJM0336C1E9R1BB01#

±0.25pF GJM0336C1E9R1CB01#

±0.5pF GJM0336C1E9R1DB01#

9.2pF ±0.05pF GJM0336C1E9R2WB01#

±0.1pF GJM0336C1E9R2BB01#

±0.25pF GJM0336C1E9R2CB01#

±0.5pF GJM0336C1E9R2DB01#

9.3pF ±0.05pF GJM0336C1E9R3WB01#

±0.1pF GJM0336C1E9R3BB01#

±0.25pF GJM0336C1E9R3CB01#

±0.5pF GJM0336C1E9R3DB01#

9.4pF ±0.05pF GJM0336C1E9R4WB01#

±0.1pF GJM0336C1E9R4BB01#

±0.25pF GJM0336C1E9R4CB01#

±0.5pF GJM0336C1E9R4DB01#

9.5pF ±0.05pF GJM0336C1E9R5WB01#

±0.1pF GJM0336C1E9R5BB01#

±0.25pF GJM0336C1E9R5CB01#

±0.5pF GJM0336C1E9R5DB01#

9.6pF ±0.05pF GJM0336C1E9R6WB01#

±0.1pF GJM0336C1E9R6BB01#

±0.25pF GJM0336C1E9R6CB01#

±0.5pF GJM0336C1E9R6DB01#

9.7pF ±0.05pF GJM0336C1E9R7WB01#

±0.1pF GJM0336C1E9R7BB01#

±0.25pF GJM0336C1E9R7CB01#

±0.5pF GJM0336C1E9R7DB01#

9.8pF ±0.05pF GJM0336C1E9R8WB01#

±0.1pF GJM0336C1E9R8BB01#

±0.25pF GJM0336C1E9R8CB01#

±0.5pF GJM0336C1E9R8DB01#

9.9pF ±0.05pF GJM0336C1E9R9WB01#

±0.1pF GJM0336C1E9R9BB01#

±0.25pF GJM0336C1E9R9CB01#

±0.5pF GJM0336C1E9R9DB01#

10pF ±2% GJM0336C1E100GB01#

±5% GJM0336C1E100JB01#

11pF ±2% GJM0336C1E110GB01#

±5% GJM0336C1E110JB01#

12pF ±2% GJM0336C1E120GB01#

±5% GJM0336C1E120JB01#

13pF ±2% GJM0336C1E130GB01#

±5% GJM0336C1E130JB01#

15pF ±2% GJM0336C1E150GB01#

±5% GJM0336C1E150JB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc C0H 16pF ±2% GJM0336C1E160GB01#

±5% GJM0336C1E160JB01#

18pF ±2% GJM0336C1E180GB01#

±5% GJM0336C1E180JB01#

20pF ±2% GJM0336C1E200GB01#

±5% GJM0336C1E200JB01#

CK 0.2pF ±0.05pF GJM0334C1ER20WB01#

±0.1pF GJM0334C1ER20BB01#

0.3pF ±0.05pF GJM0334C1ER30WB01#

±0.1pF GJM0334C1ER30BB01#

0.4pF ±0.05pF GJM0334C1ER40WB01#

±0.1pF GJM0334C1ER40BB01#

0.5pF ±0.05pF GJM0334C1ER50WB01#

±0.1pF GJM0334C1ER50BB01#

0.6pF ±0.05pF GJM0334C1ER60WB01#

±0.1pF GJM0334C1ER60BB01#

0.7pF ±0.05pF GJM0334C1ER70WB01#

±0.1pF GJM0334C1ER70BB01#

0.8pF ±0.05pF GJM0334C1ER80WB01#

±0.1pF GJM0334C1ER80BB01#

0.9pF ±0.05pF GJM0334C1ER90WB01#

±0.1pF GJM0334C1ER90BB01#

1.0pF ±0.05pF GJM0334C1E1R0WB01#

±0.1pF GJM0334C1E1R0BB01#

±0.25pF GJM0334C1E1R0CB01#

1.1pF ±0.05pF GJM0334C1E1R1WB01#

±0.1pF GJM0334C1E1R1BB01#

±0.25pF GJM0334C1E1R1CB01#

1.2pF ±0.05pF GJM0334C1E1R2WB01#

±0.1pF GJM0334C1E1R2BB01#

±0.25pF GJM0334C1E1R2CB01#

1.3pF ±0.05pF GJM0334C1E1R3WB01#

±0.1pF GJM0334C1E1R3BB01#

±0.25pF GJM0334C1E1R3CB01#

1.4pF ±0.05pF GJM0334C1E1R4WB01#

±0.1pF GJM0334C1E1R4BB01#

±0.25pF GJM0334C1E1R4CB01#

1.5pF ±0.05pF GJM0334C1E1R5WB01#

±0.1pF GJM0334C1E1R5BB01#

±0.25pF GJM0334C1E1R5CB01#

1.6pF ±0.05pF GJM0334C1E1R6WB01#

±0.1pF GJM0334C1E1R6BB01#

±0.25pF GJM0334C1E1R6CB01#

1.7pF ±0.05pF GJM0334C1E1R7WB01#

±0.1pF GJM0334C1E1R7BB01#

±0.25pF GJM0334C1E1R7CB01#

1.8pF ±0.05pF GJM0334C1E1R8WB01#

±0.1pF GJM0334C1E1R8BB01#

±0.25pF GJM0334C1E1R8CB01#

1.9pF ±0.05pF GJM0334C1E1R9WB01#

±0.1pF GJM0334C1E1R9BB01#

±0.25pF GJM0334C1E1R9CB01#

2.0pF ±0.05pF GJM0334C1E2R0WB01#

±0.1pF GJM0334C1E2R0BB01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc CK 2.0pF ±0.25pF GJM0334C1E2R0CB01#

CJ 2.1pF ±0.05pF GJM0333C1E2R1WB01#

±0.1pF GJM0333C1E2R1BB01#

±0.25pF GJM0333C1E2R1CB01#

2.2pF ±0.05pF GJM0333C1E2R2WB01#

±0.1pF GJM0333C1E2R2BB01#

±0.25pF GJM0333C1E2R2CB01#

2.3pF ±0.05pF GJM0333C1E2R3WB01#

±0.1pF GJM0333C1E2R3BB01#

±0.25pF GJM0333C1E2R3CB01#

2.4pF ±0.05pF GJM0333C1E2R4WB01#

±0.1pF GJM0333C1E2R4BB01#

±0.25pF GJM0333C1E2R4CB01#

2.5pF ±0.05pF GJM0333C1E2R5WB01#

±0.1pF GJM0333C1E2R5BB01#

±0.25pF GJM0333C1E2R5CB01#

2.6pF ±0.05pF GJM0333C1E2R6WB01#

±0.1pF GJM0333C1E2R6BB01#

±0.25pF GJM0333C1E2R6CB01#

2.7pF ±0.05pF GJM0333C1E2R7WB01#

±0.1pF GJM0333C1E2R7BB01#

±0.25pF GJM0333C1E2R7CB01#

2.8pF ±0.05pF GJM0333C1E2R8WB01#

±0.1pF GJM0333C1E2R8BB01#

±0.25pF GJM0333C1E2R8CB01#

2.9pF ±0.05pF GJM0333C1E2R9WB01#

±0.1pF GJM0333C1E2R9BB01#

±0.25pF GJM0333C1E2R9CB01#

3.0pF ±0.05pF GJM0333C1E3R0WB01#

±0.1pF GJM0333C1E3R0BB01#

±0.25pF GJM0333C1E3R0CB01#

3.1pF ±0.05pF GJM0333C1E3R1WB01#

±0.1pF GJM0333C1E3R1BB01#

±0.25pF GJM0333C1E3R1CB01#

3.2pF ±0.05pF GJM0333C1E3R2WB01#

±0.1pF GJM0333C1E3R2BB01#

±0.25pF GJM0333C1E3R2CB01#

3.3pF ±0.05pF GJM0333C1E3R3WB01#

±0.1pF GJM0333C1E3R3BB01#

±0.25pF GJM0333C1E3R3CB01#

3.4pF ±0.05pF GJM0333C1E3R4WB01#

±0.1pF GJM0333C1E3R4BB01#

±0.25pF GJM0333C1E3R4CB01#

3.5pF ±0.05pF GJM0333C1E3R5WB01#

±0.1pF GJM0333C1E3R5BB01#

±0.25pF GJM0333C1E3R5CB01#

3.6pF ±0.05pF GJM0333C1E3R6WB01#

±0.1pF GJM0333C1E3R6BB01#

±0.25pF GJM0333C1E3R6CB01#

3.7pF ±0.05pF GJM0333C1E3R7WB01#

±0.1pF GJM0333C1E3R7BB01#

±0.25pF GJM0333C1E3R7CB01#

3.8pF ±0.05pF GJM0333C1E3R8WB01#

±0.1pF GJM0333C1E3R8BB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc CJ 3.8pF ±0.25pF GJM0333C1E3R8CB01#

3.9pF ±0.05pF GJM0333C1E3R9WB01#

±0.1pF GJM0333C1E3R9BB01#

±0.25pF GJM0333C1E3R9CB01#

CH 4.0pF ±0.05pF GJM0332C1E4R0WB01#

±0.1pF GJM0332C1E4R0BB01#

±0.25pF GJM0332C1E4R0CB01#

4.1pF ±0.05pF GJM0332C1E4R1WB01#

±0.1pF GJM0332C1E4R1BB01#

±0.25pF GJM0332C1E4R1CB01#

4.2pF ±0.05pF GJM0332C1E4R2WB01#

±0.1pF GJM0332C1E4R2BB01#

±0.25pF GJM0332C1E4R2CB01#

4.3pF ±0.05pF GJM0332C1E4R3WB01#

±0.1pF GJM0332C1E4R3BB01#

±0.25pF GJM0332C1E4R3CB01#

4.4pF ±0.05pF GJM0332C1E4R4WB01#

±0.1pF GJM0332C1E4R4BB01#

±0.25pF GJM0332C1E4R4CB01#

4.5pF ±0.05pF GJM0332C1E4R5WB01#

±0.1pF GJM0332C1E4R5BB01#

±0.25pF GJM0332C1E4R5CB01#

4.6pF ±0.05pF GJM0332C1E4R6WB01#

±0.1pF GJM0332C1E4R6BB01#

±0.25pF GJM0332C1E4R6CB01#

4.7pF ±0.05pF GJM0332C1E4R7WB01#

±0.1pF GJM0332C1E4R7BB01#

±0.25pF GJM0332C1E4R7CB01#

4.8pF ±0.05pF GJM0332C1E4R8WB01#

±0.1pF GJM0332C1E4R8BB01#

±0.25pF GJM0332C1E4R8CB01#

4.9pF ±0.05pF GJM0332C1E4R9WB01#

±0.1pF GJM0332C1E4R9BB01#

±0.25pF GJM0332C1E4R9CB01#

5.0pF ±0.05pF GJM0332C1E5R0WB01#

±0.1pF GJM0332C1E5R0BB01#

±0.25pF GJM0332C1E5R0CB01#

5.1pF ±0.05pF GJM0332C1E5R1WB01#

±0.1pF GJM0332C1E5R1BB01#

±0.25pF GJM0332C1E5R1CB01#

±0.5pF GJM0332C1E5R1DB01#

5.2pF ±0.05pF GJM0332C1E5R2WB01#

±0.1pF GJM0332C1E5R2BB01#

±0.25pF GJM0332C1E5R2CB01#

±0.5pF GJM0332C1E5R2DB01#

5.3pF ±0.05pF GJM0332C1E5R3WB01#

±0.1pF GJM0332C1E5R3BB01#

±0.25pF GJM0332C1E5R3CB01#

±0.5pF GJM0332C1E5R3DB01#

5.4pF ±0.05pF GJM0332C1E5R4WB01#

±0.1pF GJM0332C1E5R4BB01#

±0.25pF GJM0332C1E5R4CB01#

±0.5pF GJM0332C1E5R4DB01#

5.5pF ±0.05pF GJM0332C1E5R5WB01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc CH 5.5pF ±0.1pF GJM0332C1E5R5BB01#

±0.25pF GJM0332C1E5R5CB01#

±0.5pF GJM0332C1E5R5DB01#

5.6pF ±0.05pF GJM0332C1E5R6WB01#

±0.1pF GJM0332C1E5R6BB01#

±0.25pF GJM0332C1E5R6CB01#

±0.5pF GJM0332C1E5R6DB01#

5.7pF ±0.05pF GJM0332C1E5R7WB01#

±0.1pF GJM0332C1E5R7BB01#

±0.25pF GJM0332C1E5R7CB01#

±0.5pF GJM0332C1E5R7DB01#

5.8pF ±0.05pF GJM0332C1E5R8WB01#

±0.1pF GJM0332C1E5R8BB01#

±0.25pF GJM0332C1E5R8CB01#

±0.5pF GJM0332C1E5R8DB01#

5.9pF ±0.05pF GJM0332C1E5R9WB01#

±0.1pF GJM0332C1E5R9BB01#

±0.25pF GJM0332C1E5R9CB01#

±0.5pF GJM0332C1E5R9DB01#

6.0pF ±0.05pF GJM0332C1E6R0WB01#

±0.1pF GJM0332C1E6R0BB01#

±0.25pF GJM0332C1E6R0CB01#

±0.5pF GJM0332C1E6R0DB01#

6.1pF ±0.05pF GJM0332C1E6R1WB01#

±0.1pF GJM0332C1E6R1BB01#

±0.25pF GJM0332C1E6R1CB01#

±0.5pF GJM0332C1E6R1DB01#

6.2pF ±0.05pF GJM0332C1E6R2WB01#

±0.1pF GJM0332C1E6R2BB01#

±0.25pF GJM0332C1E6R2CB01#

±0.5pF GJM0332C1E6R2DB01#

6.3pF ±0.05pF GJM0332C1E6R3WB01#

±0.1pF GJM0332C1E6R3BB01#

±0.25pF GJM0332C1E6R3CB01#

±0.5pF GJM0332C1E6R3DB01#

6.4pF ±0.05pF GJM0332C1E6R4WB01#

±0.1pF GJM0332C1E6R4BB01#

±0.25pF GJM0332C1E6R4CB01#

±0.5pF GJM0332C1E6R4DB01#

6.5pF ±0.05pF GJM0332C1E6R5WB01#

±0.1pF GJM0332C1E6R5BB01#

±0.25pF GJM0332C1E6R5CB01#

±0.5pF GJM0332C1E6R5DB01#

6.6pF ±0.05pF GJM0332C1E6R6WB01#

±0.1pF GJM0332C1E6R6BB01#

±0.25pF GJM0332C1E6R6CB01#

±0.5pF GJM0332C1E6R6DB01#

6.7pF ±0.05pF GJM0332C1E6R7WB01#

±0.1pF GJM0332C1E6R7BB01#

±0.25pF GJM0332C1E6R7CB01#

±0.5pF GJM0332C1E6R7DB01#

6.8pF ±0.05pF GJM0332C1E6R8WB01#

±0.1pF GJM0332C1E6R8BB01#

±0.25pF GJM0332C1E6R8CB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc CH 6.8pF ±0.5pF GJM0332C1E6R8DB01#

6.9pF ±0.05pF GJM0332C1E6R9WB01#

±0.1pF GJM0332C1E6R9BB01#

±0.25pF GJM0332C1E6R9CB01#

±0.5pF GJM0332C1E6R9DB01#

7.0pF ±0.05pF GJM0332C1E7R0WB01#

±0.1pF GJM0332C1E7R0BB01#

±0.25pF GJM0332C1E7R0CB01#

±0.5pF GJM0332C1E7R0DB01#

7.1pF ±0.05pF GJM0332C1E7R1WB01#

±0.1pF GJM0332C1E7R1BB01#

±0.25pF GJM0332C1E7R1CB01#

±0.5pF GJM0332C1E7R1DB01#

7.2pF ±0.05pF GJM0332C1E7R2WB01#

±0.1pF GJM0332C1E7R2BB01#

±0.25pF GJM0332C1E7R2CB01#

±0.5pF GJM0332C1E7R2DB01#

7.3pF ±0.05pF GJM0332C1E7R3WB01#

±0.1pF GJM0332C1E7R3BB01#

±0.25pF GJM0332C1E7R3CB01#

±0.5pF GJM0332C1E7R3DB01#

7.4pF ±0.05pF GJM0332C1E7R4WB01#

±0.1pF GJM0332C1E7R4BB01#

±0.25pF GJM0332C1E7R4CB01#

±0.5pF GJM0332C1E7R4DB01#

7.5pF ±0.05pF GJM0332C1E7R5WB01#

±0.1pF GJM0332C1E7R5BB01#

±0.25pF GJM0332C1E7R5CB01#

±0.5pF GJM0332C1E7R5DB01#

7.6pF ±0.05pF GJM0332C1E7R6WB01#

±0.1pF GJM0332C1E7R6BB01#

±0.25pF GJM0332C1E7R6CB01#

±0.5pF GJM0332C1E7R6DB01#

7.7pF ±0.05pF GJM0332C1E7R7WB01#

±0.1pF GJM0332C1E7R7BB01#

±0.25pF GJM0332C1E7R7CB01#

±0.5pF GJM0332C1E7R7DB01#

7.8pF ±0.05pF GJM0332C1E7R8WB01#

±0.1pF GJM0332C1E7R8BB01#

±0.25pF GJM0332C1E7R8CB01#

±0.5pF GJM0332C1E7R8DB01#

7.9pF ±0.05pF GJM0332C1E7R9WB01#

±0.1pF GJM0332C1E7R9BB01#

±0.25pF GJM0332C1E7R9CB01#

±0.5pF GJM0332C1E7R9DB01#

8.0pF ±0.05pF GJM0332C1E8R0WB01#

±0.1pF GJM0332C1E8R0BB01#

±0.25pF GJM0332C1E8R0CB01#

±0.5pF GJM0332C1E8R0DB01#

8.1pF ±0.05pF GJM0332C1E8R1WB01#

±0.1pF GJM0332C1E8R1BB01#

±0.25pF GJM0332C1E8R1CB01#

±0.5pF GJM0332C1E8R1DB01#

8.2pF ±0.05pF GJM0332C1E8R2WB01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc CH 8.2pF ±0.1pF GJM0332C1E8R2BB01#

±0.25pF GJM0332C1E8R2CB01#

±0.5pF GJM0332C1E8R2DB01#

8.3pF ±0.05pF GJM0332C1E8R3WB01#

±0.1pF GJM0332C1E8R3BB01#

±0.25pF GJM0332C1E8R3CB01#

±0.5pF GJM0332C1E8R3DB01#

8.4pF ±0.05pF GJM0332C1E8R4WB01#

±0.1pF GJM0332C1E8R4BB01#

±0.25pF GJM0332C1E8R4CB01#

±0.5pF GJM0332C1E8R4DB01#

8.5pF ±0.05pF GJM0332C1E8R5WB01#

±0.1pF GJM0332C1E8R5BB01#

±0.25pF GJM0332C1E8R5CB01#

±0.5pF GJM0332C1E8R5DB01#

8.6pF ±0.05pF GJM0332C1E8R6WB01#

±0.1pF GJM0332C1E8R6BB01#

±0.25pF GJM0332C1E8R6CB01#

±0.5pF GJM0332C1E8R6DB01#

8.7pF ±0.05pF GJM0332C1E8R7WB01#

±0.1pF GJM0332C1E8R7BB01#

±0.25pF GJM0332C1E8R7CB01#

±0.5pF GJM0332C1E8R7DB01#

8.8pF ±0.05pF GJM0332C1E8R8WB01#

±0.1pF GJM0332C1E8R8BB01#

±0.25pF GJM0332C1E8R8CB01#

±0.5pF GJM0332C1E8R8DB01#

8.9pF ±0.05pF GJM0332C1E8R9WB01#

±0.1pF GJM0332C1E8R9BB01#

±0.25pF GJM0332C1E8R9CB01#

±0.5pF GJM0332C1E8R9DB01#

9.0pF ±0.05pF GJM0332C1E9R0WB01#

±0.1pF GJM0332C1E9R0BB01#

±0.25pF GJM0332C1E9R0CB01#

±0.5pF GJM0332C1E9R0DB01#

9.1pF ±0.05pF GJM0332C1E9R1WB01#

±0.1pF GJM0332C1E9R1BB01#

±0.25pF GJM0332C1E9R1CB01#

±0.5pF GJM0332C1E9R1DB01#

9.2pF ±0.05pF GJM0332C1E9R2WB01#

±0.1pF GJM0332C1E9R2BB01#

±0.25pF GJM0332C1E9R2CB01#

±0.5pF GJM0332C1E9R2DB01#

9.3pF ±0.05pF GJM0332C1E9R3WB01#

±0.1pF GJM0332C1E9R3BB01#

±0.25pF GJM0332C1E9R3CB01#

±0.5pF GJM0332C1E9R3DB01#

9.4pF ±0.05pF GJM0332C1E9R4WB01#

±0.1pF GJM0332C1E9R4BB01#

±0.25pF GJM0332C1E9R4CB01#

±0.5pF GJM0332C1E9R4DB01#

9.5pF ±0.05pF GJM0332C1E9R5WB01#

±0.1pF GJM0332C1E9R5BB01#

±0.25pF GJM0332C1E9R5CB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc CH 9.5pF ±0.5pF GJM0332C1E9R5DB01#

9.6pF ±0.05pF GJM0332C1E9R6WB01#

±0.1pF GJM0332C1E9R6BB01#

±0.25pF GJM0332C1E9R6CB01#

±0.5pF GJM0332C1E9R6DB01#

9.7pF ±0.05pF GJM0332C1E9R7WB01#

±0.1pF GJM0332C1E9R7BB01#

±0.25pF GJM0332C1E9R7CB01#

±0.5pF GJM0332C1E9R7DB01#

9.8pF ±0.05pF GJM0332C1E9R8WB01#

±0.1pF GJM0332C1E9R8BB01#

±0.25pF GJM0332C1E9R8CB01#

±0.5pF GJM0332C1E9R8DB01#

9.9pF ±0.05pF GJM0332C1E9R9WB01#

±0.1pF GJM0332C1E9R9BB01#

±0.25pF GJM0332C1E9R9CB01#

±0.5pF GJM0332C1E9R9DB01#

10pF ±2% GJM0332C1E100GB01#

±5% GJM0332C1E100JB01#

11pF ±2% GJM0332C1E110GB01#

±5% GJM0332C1E110JB01#

12pF ±2% GJM0332C1E120GB01#

±5% GJM0332C1E120JB01#

13pF ±2% GJM0332C1E130GB01#

±5% GJM0332C1E130JB01#

15pF ±2% GJM0332C1E150GB01#

±5% GJM0332C1E150JB01#

16pF ±2% GJM0332C1E160GB01#

±5% GJM0332C1E160JB01#

18pF ±2% GJM0332C1E180GB01#

±5% GJM0332C1E180JB01#

20pF ±2% GJM0332C1E200GB01#

±5% GJM0332C1E200JB01#

6.3Vdc C0G 22pF ±2% GJM0335C0J220GB01#

±5% GJM0335C0J220JB01#

24pF ±2% GJM0335C0J240GB01#

±5% GJM0335C0J240JB01#

27pF ±2% GJM0335C0J270GB01#

±5% GJM0335C0J270JB01#

30pF ±2% GJM0335C0J300GB01#

±5% GJM0335C0J300JB01#

33pF ±2% GJM0335C0J330GB01#

±5% GJM0335C0J330JB01#

CH 22pF ±2% GJM0332C0J220GB01#

±5% GJM0332C0J220JB01#

24pF ±2% GJM0332C0J240GB01#

±5% GJM0332C0J240JB01#

27pF ±2% GJM0332C0J270GB01#

±5% GJM0332C0J270JB01#

30pF ±2% GJM0332C0J300GB01#

±5% GJM0332C0J300JB01#

33pF ±2% GJM0332C0J330GB01#

±5% GJM0332C0J330JB01#

(→ c 0.6×0.3mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GJM Series Temperature Compensating Type HiQ Part Number List

c 1.0×0.5mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 0.1pF ±0.05pF GJM1555C1HR10WB01#

±0.1pF GJM1555C1HR10BB01#

0.2pF ±0.05pF GJM1555C1HR20WB01#

±0.1pF GJM1555C1HR20BB01#

0.3pF ±0.05pF GJM1555C1HR30WB01#

±0.1pF GJM1555C1HR30BB01#

0.4pF ±0.05pF GJM1555C1HR40WB01#

±0.1pF GJM1555C1HR40BB01#

0.5pF ±0.05pF GJM1555C1HR50WB01#

±0.1pF GJM1555C1HR50BB01#

0.6pF ±0.05pF GJM1555C1HR60WB01#

±0.1pF GJM1555C1HR60BB01#

0.7pF ±0.05pF GJM1555C1HR70WB01#

±0.1pF GJM1555C1HR70BB01#

0.8pF ±0.05pF GJM1555C1HR80WB01#

±0.1pF GJM1555C1HR80BB01#

0.9pF ±0.05pF GJM1555C1HR90WB01#

±0.1pF GJM1555C1HR90BB01#

1.0pF ±0.05pF GJM1555C1H1R0WB01#

±0.1pF GJM1555C1H1R0BB01#

±0.25pF GJM1555C1H1R0CB01#

1.1pF ±0.05pF GJM1555C1H1R1WB01#

±0.1pF GJM1555C1H1R1BB01#

±0.25pF GJM1555C1H1R1CB01#

1.2pF ±0.05pF GJM1555C1H1R2WB01#

±0.1pF GJM1555C1H1R2BB01#

±0.25pF GJM1555C1H1R2CB01#

1.3pF ±0.05pF GJM1555C1H1R3WB01#

±0.1pF GJM1555C1H1R3BB01#

±0.25pF GJM1555C1H1R3CB01#

1.4pF ±0.05pF GJM1555C1H1R4WB01#

±0.1pF GJM1555C1H1R4BB01#

±0.25pF GJM1555C1H1R4CB01#

1.5pF ±0.05pF GJM1555C1H1R5WB01#

±0.1pF GJM1555C1H1R5BB01#

±0.25pF GJM1555C1H1R5CB01#

1.6pF ±0.05pF GJM1555C1H1R6WB01#

±0.1pF GJM1555C1H1R6BB01#

±0.25pF GJM1555C1H1R6CB01#

1.7pF ±0.05pF GJM1555C1H1R7WB01#

±0.1pF GJM1555C1H1R7BB01#

±0.25pF GJM1555C1H1R7CB01#

1.8pF ±0.05pF GJM1555C1H1R8WB01#

±0.1pF GJM1555C1H1R8BB01#

±0.25pF GJM1555C1H1R8CB01#

1.9pF ±0.05pF GJM1555C1H1R9WB01#

±0.1pF GJM1555C1H1R9BB01#

±0.25pF GJM1555C1H1R9CB01#

2.0pF ±0.05pF GJM1555C1H2R0WB01#

±0.1pF GJM1555C1H2R0BB01#

±0.25pF GJM1555C1H2R0CB01#

2.1pF ±0.05pF GJM1555C1H2R1WB01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 2.1pF ±0.1pF GJM1555C1H2R1BB01#

±0.25pF GJM1555C1H2R1CB01#

2.2pF ±0.05pF GJM1555C1H2R2WB01#

±0.1pF GJM1555C1H2R2BB01#

±0.25pF GJM1555C1H2R2CB01#

2.3pF ±0.05pF GJM1555C1H2R3WB01#

±0.1pF GJM1555C1H2R3BB01#

±0.25pF GJM1555C1H2R3CB01#

2.4pF ±0.05pF GJM1555C1H2R4WB01#

±0.1pF GJM1555C1H2R4BB01#

±0.25pF GJM1555C1H2R4CB01#

2.5pF ±0.05pF GJM1555C1H2R5WB01#

±0.1pF GJM1555C1H2R5BB01#

±0.25pF GJM1555C1H2R5CB01#

2.6pF ±0.05pF GJM1555C1H2R6WB01#

±0.1pF GJM1555C1H2R6BB01#

±0.25pF GJM1555C1H2R6CB01#

2.7pF ±0.05pF GJM1555C1H2R7WB01#

±0.1pF GJM1555C1H2R7BB01#

±0.25pF GJM1555C1H2R7CB01#

2.8pF ±0.05pF GJM1555C1H2R8WB01#

±0.1pF GJM1555C1H2R8BB01#

±0.25pF GJM1555C1H2R8CB01#

2.9pF ±0.05pF GJM1555C1H2R9WB01#

±0.1pF GJM1555C1H2R9BB01#

±0.25pF GJM1555C1H2R9CB01#

3.0pF ±0.05pF GJM1555C1H3R0WB01#

±0.1pF GJM1555C1H3R0BB01#

±0.25pF GJM1555C1H3R0CB01#

3.1pF ±0.05pF GJM1555C1H3R1WB01#

±0.1pF GJM1555C1H3R1BB01#

±0.25pF GJM1555C1H3R1CB01#

3.2pF ±0.05pF GJM1555C1H3R2WB01#

±0.1pF GJM1555C1H3R2BB01#

±0.25pF GJM1555C1H3R2CB01#

3.3pF ±0.05pF GJM1555C1H3R3WB01#

±0.1pF GJM1555C1H3R3BB01#

±0.25pF GJM1555C1H3R3CB01#

3.4pF ±0.05pF GJM1555C1H3R4WB01#

±0.1pF GJM1555C1H3R4BB01#

±0.25pF GJM1555C1H3R4CB01#

3.5pF ±0.05pF GJM1555C1H3R5WB01#

±0.1pF GJM1555C1H3R5BB01#

±0.25pF GJM1555C1H3R5CB01#

3.6pF ±0.05pF GJM1555C1H3R6WB01#

±0.1pF GJM1555C1H3R6BB01#

±0.25pF GJM1555C1H3R6CB01#

3.7pF ±0.05pF GJM1555C1H3R7WB01#

±0.1pF GJM1555C1H3R7BB01#

±0.25pF GJM1555C1H3R7CB01#

3.8pF ±0.05pF GJM1555C1H3R8WB01#

±0.1pF GJM1555C1H3R8BB01#

±0.25pF GJM1555C1H3R8CB01#

3.9pF ±0.05pF GJM1555C1H3R9WB01#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 3.9pF ±0.1pF GJM1555C1H3R9BB01#

±0.25pF GJM1555C1H3R9CB01#

4.0pF ±0.05pF GJM1555C1H4R0WB01#

±0.1pF GJM1555C1H4R0BB01#

±0.25pF GJM1555C1H4R0CB01#

4.1pF ±0.05pF GJM1555C1H4R1WB01#

±0.1pF GJM1555C1H4R1BB01#

±0.25pF GJM1555C1H4R1CB01#

4.2pF ±0.05pF GJM1555C1H4R2WB01#

±0.1pF GJM1555C1H4R2BB01#

±0.25pF GJM1555C1H4R2CB01#

4.3pF ±0.05pF GJM1555C1H4R3WB01#

±0.1pF GJM1555C1H4R3BB01#

±0.25pF GJM1555C1H4R3CB01#

4.4pF ±0.05pF GJM1555C1H4R4WB01#

±0.1pF GJM1555C1H4R4BB01#

±0.25pF GJM1555C1H4R4CB01#

4.5pF ±0.05pF GJM1555C1H4R5WB01#

±0.1pF GJM1555C1H4R5BB01#

±0.25pF GJM1555C1H4R5CB01#

4.6pF ±0.05pF GJM1555C1H4R6WB01#

±0.1pF GJM1555C1H4R6BB01#

±0.25pF GJM1555C1H4R6CB01#

4.7pF ±0.05pF GJM1555C1H4R7WB01#

±0.1pF GJM1555C1H4R7BB01#

±0.25pF GJM1555C1H4R7CB01#

4.8pF ±0.05pF GJM1555C1H4R8WB01#

±0.1pF GJM1555C1H4R8BB01#

±0.25pF GJM1555C1H4R8CB01#

4.9pF ±0.05pF GJM1555C1H4R9WB01#

±0.1pF GJM1555C1H4R9BB01#

±0.25pF GJM1555C1H4R9CB01#

5.0pF ±0.05pF GJM1555C1H5R0WB01#

±0.1pF GJM1555C1H5R0BB01#

±0.25pF GJM1555C1H5R0CB01#

5.1pF ±0.05pF GJM1555C1H5R1WB01#

±0.1pF GJM1555C1H5R1BB01#

±0.25pF GJM1555C1H5R1CB01#

±0.5pF GJM1555C1H5R1DB01#

5.2pF ±0.05pF GJM1555C1H5R2WB01#

±0.1pF GJM1555C1H5R2BB01#

±0.25pF GJM1555C1H5R2CB01#

±0.5pF GJM1555C1H5R2DB01#

5.3pF ±0.05pF GJM1555C1H5R3WB01#

±0.1pF GJM1555C1H5R3BB01#

±0.25pF GJM1555C1H5R3CB01#

±0.5pF GJM1555C1H5R3DB01#

5.4pF ±0.05pF GJM1555C1H5R4WB01#

±0.1pF GJM1555C1H5R4BB01#

±0.25pF GJM1555C1H5R4CB01#

±0.5pF GJM1555C1H5R4DB01#

5.5pF ±0.05pF GJM1555C1H5R5WB01#

±0.1pF GJM1555C1H5R5BB01#

±0.25pF GJM1555C1H5R5CB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 5.5pF ±0.5pF GJM1555C1H5R5DB01#

5.6pF ±0.05pF GJM1555C1H5R6WB01#

±0.1pF GJM1555C1H5R6BB01#

±0.25pF GJM1555C1H5R6CB01#

±0.5pF GJM1555C1H5R6DB01#

5.7pF ±0.05pF GJM1555C1H5R7WB01#

±0.1pF GJM1555C1H5R7BB01#

±0.25pF GJM1555C1H5R7CB01#

±0.5pF GJM1555C1H5R7DB01#

5.8pF ±0.05pF GJM1555C1H5R8WB01#

±0.1pF GJM1555C1H5R8BB01#

±0.25pF GJM1555C1H5R8CB01#

±0.5pF GJM1555C1H5R8DB01#

5.9pF ±0.05pF GJM1555C1H5R9WB01#

±0.1pF GJM1555C1H5R9BB01#

±0.25pF GJM1555C1H5R9CB01#

±0.5pF GJM1555C1H5R9DB01#

6.0pF ±0.05pF GJM1555C1H6R0WB01#

±0.1pF GJM1555C1H6R0BB01#

±0.25pF GJM1555C1H6R0CB01#

±0.5pF GJM1555C1H6R0DB01#

6.1pF ±0.05pF GJM1555C1H6R1WB01#

±0.1pF GJM1555C1H6R1BB01#

±0.25pF GJM1555C1H6R1CB01#

±0.5pF GJM1555C1H6R1DB01#

6.2pF ±0.05pF GJM1555C1H6R2WB01#

±0.1pF GJM1555C1H6R2BB01#

±0.25pF GJM1555C1H6R2CB01#

±0.5pF GJM1555C1H6R2DB01#

6.3pF ±0.05pF GJM1555C1H6R3WB01#

±0.1pF GJM1555C1H6R3BB01#

±0.25pF GJM1555C1H6R3CB01#

±0.5pF GJM1555C1H6R3DB01#

6.4pF ±0.05pF GJM1555C1H6R4WB01#

±0.1pF GJM1555C1H6R4BB01#

±0.25pF GJM1555C1H6R4CB01#

±0.5pF GJM1555C1H6R4DB01#

6.5pF ±0.05pF GJM1555C1H6R5WB01#

±0.1pF GJM1555C1H6R5BB01#

±0.25pF GJM1555C1H6R5CB01#

±0.5pF GJM1555C1H6R5DB01#

6.6pF ±0.05pF GJM1555C1H6R6WB01#

±0.1pF GJM1555C1H6R6BB01#

±0.25pF GJM1555C1H6R6CB01#

±0.5pF GJM1555C1H6R6DB01#

6.7pF ±0.05pF GJM1555C1H6R7WB01#

±0.1pF GJM1555C1H6R7BB01#

±0.25pF GJM1555C1H6R7CB01#

±0.5pF GJM1555C1H6R7DB01#

6.8pF ±0.05pF GJM1555C1H6R8WB01#

±0.1pF GJM1555C1H6R8BB01#

±0.25pF GJM1555C1H6R8CB01#

±0.5pF GJM1555C1H6R8DB01#

6.9pF ±0.05pF GJM1555C1H6R9WB01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 6.9pF ±0.1pF GJM1555C1H6R9BB01#

±0.25pF GJM1555C1H6R9CB01#

±0.5pF GJM1555C1H6R9DB01#

7.0pF ±0.05pF GJM1555C1H7R0WB01#

±0.1pF GJM1555C1H7R0BB01#

±0.25pF GJM1555C1H7R0CB01#

±0.5pF GJM1555C1H7R0DB01#

7.1pF ±0.05pF GJM1555C1H7R1WB01#

±0.1pF GJM1555C1H7R1BB01#

±0.25pF GJM1555C1H7R1CB01#

±0.5pF GJM1555C1H7R1DB01#

7.2pF ±0.05pF GJM1555C1H7R2WB01#

±0.1pF GJM1555C1H7R2BB01#

±0.25pF GJM1555C1H7R2CB01#

±0.5pF GJM1555C1H7R2DB01#

7.3pF ±0.05pF GJM1555C1H7R3WB01#

±0.1pF GJM1555C1H7R3BB01#

±0.25pF GJM1555C1H7R3CB01#

±0.5pF GJM1555C1H7R3DB01#

7.4pF ±0.05pF GJM1555C1H7R4WB01#

±0.1pF GJM1555C1H7R4BB01#

±0.25pF GJM1555C1H7R4CB01#

±0.5pF GJM1555C1H7R4DB01#

7.5pF ±0.05pF GJM1555C1H7R5WB01#

±0.1pF GJM1555C1H7R5BB01#

±0.25pF GJM1555C1H7R5CB01#

±0.5pF GJM1555C1H7R5DB01#

7.6pF ±0.05pF GJM1555C1H7R6WB01#

±0.1pF GJM1555C1H7R6BB01#

±0.25pF GJM1555C1H7R6CB01#

±0.5pF GJM1555C1H7R6DB01#

7.7pF ±0.05pF GJM1555C1H7R7WB01#

±0.1pF GJM1555C1H7R7BB01#

±0.25pF GJM1555C1H7R7CB01#

±0.5pF GJM1555C1H7R7DB01#

7.8pF ±0.05pF GJM1555C1H7R8WB01#

±0.1pF GJM1555C1H7R8BB01#

±0.25pF GJM1555C1H7R8CB01#

±0.5pF GJM1555C1H7R8DB01#

7.9pF ±0.05pF GJM1555C1H7R9WB01#

±0.1pF GJM1555C1H7R9BB01#

±0.25pF GJM1555C1H7R9CB01#

±0.5pF GJM1555C1H7R9DB01#

8.0pF ±0.05pF GJM1555C1H8R0WB01#

±0.1pF GJM1555C1H8R0BB01#

±0.25pF GJM1555C1H8R0CB01#

±0.5pF GJM1555C1H8R0DB01#

8.1pF ±0.05pF GJM1555C1H8R1WB01#

±0.1pF GJM1555C1H8R1BB01#

±0.25pF GJM1555C1H8R1CB01#

±0.5pF GJM1555C1H8R1DB01#

8.2pF ±0.05pF GJM1555C1H8R2WB01#

±0.1pF GJM1555C1H8R2BB01#

±0.25pF GJM1555C1H8R2CB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 8.2pF ±0.5pF GJM1555C1H8R2DB01#

8.3pF ±0.05pF GJM1555C1H8R3WB01#

±0.1pF GJM1555C1H8R3BB01#

±0.25pF GJM1555C1H8R3CB01#

±0.5pF GJM1555C1H8R3DB01#

8.4pF ±0.05pF GJM1555C1H8R4WB01#

±0.1pF GJM1555C1H8R4BB01#

±0.25pF GJM1555C1H8R4CB01#

±0.5pF GJM1555C1H8R4DB01#

8.5pF ±0.05pF GJM1555C1H8R5WB01#

±0.1pF GJM1555C1H8R5BB01#

±0.25pF GJM1555C1H8R5CB01#

±0.5pF GJM1555C1H8R5DB01#

8.6pF ±0.05pF GJM1555C1H8R6WB01#

±0.1pF GJM1555C1H8R6BB01#

±0.25pF GJM1555C1H8R6CB01#

±0.5pF GJM1555C1H8R6DB01#

8.7pF ±0.05pF GJM1555C1H8R7WB01#

±0.1pF GJM1555C1H8R7BB01#

±0.25pF GJM1555C1H8R7CB01#

±0.5pF GJM1555C1H8R7DB01#

8.8pF ±0.05pF GJM1555C1H8R8WB01#

±0.1pF GJM1555C1H8R8BB01#

±0.25pF GJM1555C1H8R8CB01#

±0.5pF GJM1555C1H8R8DB01#

8.9pF ±0.05pF GJM1555C1H8R9WB01#

±0.1pF GJM1555C1H8R9BB01#

±0.25pF GJM1555C1H8R9CB01#

±0.5pF GJM1555C1H8R9DB01#

9.0pF ±0.05pF GJM1555C1H9R0WB01#

±0.1pF GJM1555C1H9R0BB01#

±0.25pF GJM1555C1H9R0CB01#

±0.5pF GJM1555C1H9R0DB01#

9.1pF ±0.05pF GJM1555C1H9R1WB01#

±0.1pF GJM1555C1H9R1BB01#

±0.25pF GJM1555C1H9R1CB01#

±0.5pF GJM1555C1H9R1DB01#

9.2pF ±0.05pF GJM1555C1H9R2WB01#

±0.1pF GJM1555C1H9R2BB01#

±0.25pF GJM1555C1H9R2CB01#

±0.5pF GJM1555C1H9R2DB01#

9.3pF ±0.05pF GJM1555C1H9R3WB01#

±0.1pF GJM1555C1H9R3BB01#

±0.25pF GJM1555C1H9R3CB01#

±0.5pF GJM1555C1H9R3DB01#

9.4pF ±0.05pF GJM1555C1H9R4WB01#

±0.1pF GJM1555C1H9R4BB01#

±0.25pF GJM1555C1H9R4CB01#

±0.5pF GJM1555C1H9R4DB01#

9.5pF ±0.05pF GJM1555C1H9R5WB01#

±0.1pF GJM1555C1H9R5BB01#

±0.25pF GJM1555C1H9R5CB01#

±0.5pF GJM1555C1H9R5DB01#

9.6pF ±0.05pF GJM1555C1H9R6WB01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 9.6pF ±0.1pF GJM1555C1H9R6BB01#

±0.25pF GJM1555C1H9R6CB01#

±0.5pF GJM1555C1H9R6DB01#

9.7pF ±0.05pF GJM1555C1H9R7WB01#

±0.1pF GJM1555C1H9R7BB01#

±0.25pF GJM1555C1H9R7CB01#

±0.5pF GJM1555C1H9R7DB01#

9.8pF ±0.05pF GJM1555C1H9R8WB01#

±0.1pF GJM1555C1H9R8BB01#

±0.25pF GJM1555C1H9R8CB01#

±0.5pF GJM1555C1H9R8DB01#

9.9pF ±0.05pF GJM1555C1H9R9WB01#

±0.1pF GJM1555C1H9R9BB01#

±0.25pF GJM1555C1H9R9CB01#

±0.5pF GJM1555C1H9R9DB01#

10pF ±2% GJM1555C1H100GB01#

±5% GJM1555C1H100JB01#

11pF ±2% GJM1555C1H110GB01#

±5% GJM1555C1H110JB01#

12pF ±2% GJM1555C1H120GB01#

±5% GJM1555C1H120JB01#

13pF ±2% GJM1555C1H130GB01#

±5% GJM1555C1H130JB01#

15pF ±2% GJM1555C1H150GB01#

±5% GJM1555C1H150JB01#

16pF ±2% GJM1555C1H160GB01#

±5% GJM1555C1H160JB01#

18pF ±2% GJM1555C1H180GB01#

±5% GJM1555C1H180JB01#

20pF ±2% GJM1555C1H200GB01#

±5% GJM1555C1H200JB01#

22pF ±1% GJM1555C1H220FB01#

±2% GJM1555C1H220GB01#

±5% GJM1555C1H220JB01#

24pF ±1% GJM1555C1H240FB01#

±2% GJM1555C1H240GB01#

±5% GJM1555C1H240JB01#

27pF ±1% GJM1555C1H270FB01#

±2% GJM1555C1H270GB01#

±5% GJM1555C1H270JB01#

30pF ±1% GJM1555C1H300FB01#

±2% GJM1555C1H300GB01#

±5% GJM1555C1H300JB01#

33pF ±1% GJM1555C1H330FB01#

±2% GJM1555C1H330GB01#

±5% GJM1555C1H330JB01#

36pF ±1% GJM1555C1H360FB01#

±2% GJM1555C1H360GB01#

±5% GJM1555C1H360JB01#

39pF ±1% GJM1555C1H390FB01#

±2% GJM1555C1H390GB01#

±5% GJM1555C1H390JB01#

43pF ±1% GJM1555C1H430FB01#

±2% GJM1555C1H430GB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc C0G 43pF ±5% GJM1555C1H430JB01#

47pF ±1% GJM1555C1H470FB01#

±2% GJM1555C1H470GB01#

±5% GJM1555C1H470JB01#

CK 0.1pF ±0.05pF GJM1554C1HR10WB01#

±0.1pF GJM1554C1HR10BB01#

0.2pF ±0.05pF GJM1554C1HR20WB01#

±0.1pF GJM1554C1HR20BB01#

0.3pF ±0.05pF GJM1554C1HR30WB01#

±0.1pF GJM1554C1HR30BB01#

0.4pF ±0.05pF GJM1554C1HR40WB01#

±0.1pF GJM1554C1HR40BB01#

0.5pF ±0.05pF GJM1554C1HR50WB01#

±0.1pF GJM1554C1HR50BB01#

0.6pF ±0.05pF GJM1554C1HR60WB01#

±0.1pF GJM1554C1HR60BB01#

0.7pF ±0.05pF GJM1554C1HR70WB01#

±0.1pF GJM1554C1HR70BB01#

0.8pF ±0.05pF GJM1554C1HR80WB01#

±0.1pF GJM1554C1HR80BB01#

0.9pF ±0.05pF GJM1554C1HR90WB01#

±0.1pF GJM1554C1HR90BB01#

1.0pF ±0.05pF GJM1554C1H1R0WB01#

±0.1pF GJM1554C1H1R0BB01#

±0.25pF GJM1554C1H1R0CB01#

1.1pF ±0.05pF GJM1554C1H1R1WB01#

±0.1pF GJM1554C1H1R1BB01#

±0.25pF GJM1554C1H1R1CB01#

1.2pF ±0.05pF GJM1554C1H1R2WB01#

±0.1pF GJM1554C1H1R2BB01#

±0.25pF GJM1554C1H1R2CB01#

1.3pF ±0.05pF GJM1554C1H1R3WB01#

±0.1pF GJM1554C1H1R3BB01#

±0.25pF GJM1554C1H1R3CB01#

1.4pF ±0.05pF GJM1554C1H1R4WB01#

±0.1pF GJM1554C1H1R4BB01#

±0.25pF GJM1554C1H1R4CB01#

1.5pF ±0.05pF GJM1554C1H1R5WB01#

±0.1pF GJM1554C1H1R5BB01#

±0.25pF GJM1554C1H1R5CB01#

1.6pF ±0.05pF GJM1554C1H1R6WB01#

±0.1pF GJM1554C1H1R6BB01#

±0.25pF GJM1554C1H1R6CB01#

1.7pF ±0.05pF GJM1554C1H1R7WB01#

±0.1pF GJM1554C1H1R7BB01#

±0.25pF GJM1554C1H1R7CB01#

1.8pF ±0.05pF GJM1554C1H1R8WB01#

±0.1pF GJM1554C1H1R8BB01#

±0.25pF GJM1554C1H1R8CB01#

1.9pF ±0.05pF GJM1554C1H1R9WB01#

±0.1pF GJM1554C1H1R9BB01#

±0.25pF GJM1554C1H1R9CB01#

2.0pF ±0.05pF GJM1554C1H2R0WB01#

±0.1pF GJM1554C1H2R0BB01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CK 2.0pF ±0.25pF GJM1554C1H2R0CB01#

CJ 2.1pF ±0.05pF GJM1553C1H2R1WB01#

±0.1pF GJM1553C1H2R1BB01#

±0.25pF GJM1553C1H2R1CB01#

2.2pF ±0.05pF GJM1553C1H2R2WB01#

±0.1pF GJM1553C1H2R2BB01#

±0.25pF GJM1553C1H2R2CB01#

2.3pF ±0.05pF GJM1553C1H2R3WB01#

±0.1pF GJM1553C1H2R3BB01#

±0.25pF GJM1553C1H2R3CB01#

2.4pF ±0.05pF GJM1553C1H2R4WB01#

±0.1pF GJM1553C1H2R4BB01#

±0.25pF GJM1553C1H2R4CB01#

2.5pF ±0.05pF GJM1553C1H2R5WB01#

±0.1pF GJM1553C1H2R5BB01#

±0.25pF GJM1553C1H2R5CB01#

2.6pF ±0.05pF GJM1553C1H2R6WB01#

±0.1pF GJM1553C1H2R6BB01#

±0.25pF GJM1553C1H2R6CB01#

2.7pF ±0.05pF GJM1553C1H2R7WB01#

±0.1pF GJM1553C1H2R7BB01#

±0.25pF GJM1553C1H2R7CB01#

2.8pF ±0.05pF GJM1553C1H2R8WB01#

±0.1pF GJM1553C1H2R8BB01#

±0.25pF GJM1553C1H2R8CB01#

2.9pF ±0.05pF GJM1553C1H2R9WB01#

±0.1pF GJM1553C1H2R9BB01#

±0.25pF GJM1553C1H2R9CB01#

3.0pF ±0.05pF GJM1553C1H3R0WB01#

±0.1pF GJM1553C1H3R0BB01#

±0.25pF GJM1553C1H3R0CB01#

3.1pF ±0.05pF GJM1553C1H3R1WB01#

±0.1pF GJM1553C1H3R1BB01#

±0.25pF GJM1553C1H3R1CB01#

3.2pF ±0.05pF GJM1553C1H3R2WB01#

±0.1pF GJM1553C1H3R2BB01#

±0.25pF GJM1553C1H3R2CB01#

3.3pF ±0.05pF GJM1553C1H3R3WB01#

±0.1pF GJM1553C1H3R3BB01#

±0.25pF GJM1553C1H3R3CB01#

3.4pF ±0.05pF GJM1553C1H3R4WB01#

±0.1pF GJM1553C1H3R4BB01#

±0.25pF GJM1553C1H3R4CB01#

3.5pF ±0.05pF GJM1553C1H3R5WB01#

±0.1pF GJM1553C1H3R5BB01#

±0.25pF GJM1553C1H3R5CB01#

3.6pF ±0.05pF GJM1553C1H3R6WB01#

±0.1pF GJM1553C1H3R6BB01#

±0.25pF GJM1553C1H3R6CB01#

3.7pF ±0.05pF GJM1553C1H3R7WB01#

±0.1pF GJM1553C1H3R7BB01#

±0.25pF GJM1553C1H3R7CB01#

3.8pF ±0.05pF GJM1553C1H3R8WB01#

±0.1pF GJM1553C1H3R8BB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CJ 3.8pF ±0.25pF GJM1553C1H3R8CB01#

3.9pF ±0.05pF GJM1553C1H3R9WB01#

±0.1pF GJM1553C1H3R9BB01#

±0.25pF GJM1553C1H3R9CB01#

CH 4.0pF ±0.05pF GJM1552C1H4R0WB01#

±0.1pF GJM1552C1H4R0BB01#

±0.25pF GJM1552C1H4R0CB01#

4.1pF ±0.05pF GJM1552C1H4R1WB01#

±0.1pF GJM1552C1H4R1BB01#

±0.25pF GJM1552C1H4R1CB01#

4.2pF ±0.05pF GJM1552C1H4R2WB01#

±0.1pF GJM1552C1H4R2BB01#

±0.25pF GJM1552C1H4R2CB01#

4.3pF ±0.05pF GJM1552C1H4R3WB01#

±0.1pF GJM1552C1H4R3BB01#

±0.25pF GJM1552C1H4R3CB01#

4.4pF ±0.05pF GJM1552C1H4R4WB01#

±0.1pF GJM1552C1H4R4BB01#

±0.25pF GJM1552C1H4R4CB01#

4.5pF ±0.05pF GJM1552C1H4R5WB01#

±0.1pF GJM1552C1H4R5BB01#

±0.25pF GJM1552C1H4R5CB01#

4.6pF ±0.05pF GJM1552C1H4R6WB01#

±0.1pF GJM1552C1H4R6BB01#

±0.25pF GJM1552C1H4R6CB01#

4.7pF ±0.05pF GJM1552C1H4R7WB01#

±0.1pF GJM1552C1H4R7BB01#

±0.25pF GJM1552C1H4R7CB01#

4.8pF ±0.05pF GJM1552C1H4R8WB01#

±0.1pF GJM1552C1H4R8BB01#

±0.25pF GJM1552C1H4R8CB01#

4.9pF ±0.05pF GJM1552C1H4R9WB01#

±0.1pF GJM1552C1H4R9BB01#

±0.25pF GJM1552C1H4R9CB01#

5.0pF ±0.05pF GJM1552C1H5R0WB01#

±0.1pF GJM1552C1H5R0BB01#

±0.25pF GJM1552C1H5R0CB01#

5.1pF ±0.05pF GJM1552C1H5R1WB01#

±0.1pF GJM1552C1H5R1BB01#

±0.25pF GJM1552C1H5R1CB01#

±0.5pF GJM1552C1H5R1DB01#

5.2pF ±0.05pF GJM1552C1H5R2WB01#

±0.1pF GJM1552C1H5R2BB01#

±0.25pF GJM1552C1H5R2CB01#

±0.5pF GJM1552C1H5R2DB01#

5.3pF ±0.05pF GJM1552C1H5R3WB01#

±0.1pF GJM1552C1H5R3BB01#

±0.25pF GJM1552C1H5R3CB01#

±0.5pF GJM1552C1H5R3DB01#

5.4pF ±0.05pF GJM1552C1H5R4WB01#

±0.1pF GJM1552C1H5R4BB01#

±0.25pF GJM1552C1H5R4CB01#

±0.5pF GJM1552C1H5R4DB01#

5.5pF ±0.05pF GJM1552C1H5R5WB01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

100

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 5.5pF ±0.1pF GJM1552C1H5R5BB01#

±0.25pF GJM1552C1H5R5CB01#

±0.5pF GJM1552C1H5R5DB01#

5.6pF ±0.05pF GJM1552C1H5R6WB01#

±0.1pF GJM1552C1H5R6BB01#

±0.25pF GJM1552C1H5R6CB01#

±0.5pF GJM1552C1H5R6DB01#

5.7pF ±0.05pF GJM1552C1H5R7WB01#

±0.1pF GJM1552C1H5R7BB01#

±0.25pF GJM1552C1H5R7CB01#

±0.5pF GJM1552C1H5R7DB01#

5.8pF ±0.05pF GJM1552C1H5R8WB01#

±0.1pF GJM1552C1H5R8BB01#

±0.25pF GJM1552C1H5R8CB01#

±0.5pF GJM1552C1H5R8DB01#

5.9pF ±0.05pF GJM1552C1H5R9WB01#

±0.1pF GJM1552C1H5R9BB01#

±0.25pF GJM1552C1H5R9CB01#

±0.5pF GJM1552C1H5R9DB01#

6.0pF ±0.05pF GJM1552C1H6R0WB01#

±0.1pF GJM1552C1H6R0BB01#

±0.25pF GJM1552C1H6R0CB01#

±0.5pF GJM1552C1H6R0DB01#

6.1pF ±0.05pF GJM1552C1H6R1WB01#

±0.1pF GJM1552C1H6R1BB01#

±0.25pF GJM1552C1H6R1CB01#

±0.5pF GJM1552C1H6R1DB01#

6.2pF ±0.05pF GJM1552C1H6R2WB01#

±0.1pF GJM1552C1H6R2BB01#

±0.25pF GJM1552C1H6R2CB01#

±0.5pF GJM1552C1H6R2DB01#

6.3pF ±0.05pF GJM1552C1H6R3WB01#

±0.1pF GJM1552C1H6R3BB01#

±0.25pF GJM1552C1H6R3CB01#

±0.5pF GJM1552C1H6R3DB01#

6.4pF ±0.05pF GJM1552C1H6R4WB01#

±0.1pF GJM1552C1H6R4BB01#

±0.25pF GJM1552C1H6R4CB01#

±0.5pF GJM1552C1H6R4DB01#

6.5pF ±0.05pF GJM1552C1H6R5WB01#

±0.1pF GJM1552C1H6R5BB01#

±0.25pF GJM1552C1H6R5CB01#

±0.5pF GJM1552C1H6R5DB01#

6.6pF ±0.05pF GJM1552C1H6R6WB01#

±0.1pF GJM1552C1H6R6BB01#

±0.25pF GJM1552C1H6R6CB01#

±0.5pF GJM1552C1H6R6DB01#

6.7pF ±0.05pF GJM1552C1H6R7WB01#

±0.1pF GJM1552C1H6R7BB01#

±0.25pF GJM1552C1H6R7CB01#

±0.5pF GJM1552C1H6R7DB01#

6.8pF ±0.05pF GJM1552C1H6R8WB01#

±0.1pF GJM1552C1H6R8BB01#

±0.25pF GJM1552C1H6R8CB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 6.8pF ±0.5pF GJM1552C1H6R8DB01#

6.9pF ±0.05pF GJM1552C1H6R9WB01#

±0.1pF GJM1552C1H6R9BB01#

±0.25pF GJM1552C1H6R9CB01#

±0.5pF GJM1552C1H6R9DB01#

7.0pF ±0.05pF GJM1552C1H7R0WB01#

±0.1pF GJM1552C1H7R0BB01#

±0.25pF GJM1552C1H7R0CB01#

±0.5pF GJM1552C1H7R0DB01#

7.1pF ±0.05pF GJM1552C1H7R1WB01#

±0.1pF GJM1552C1H7R1BB01#

±0.25pF GJM1552C1H7R1CB01#

±0.5pF GJM1552C1H7R1DB01#

7.2pF ±0.05pF GJM1552C1H7R2WB01#

±0.1pF GJM1552C1H7R2BB01#

±0.25pF GJM1552C1H7R2CB01#

±0.5pF GJM1552C1H7R2DB01#

7.3pF ±0.05pF GJM1552C1H7R3WB01#

±0.1pF GJM1552C1H7R3BB01#

±0.25pF GJM1552C1H7R3CB01#

±0.5pF GJM1552C1H7R3DB01#

7.4pF ±0.05pF GJM1552C1H7R4WB01#

±0.1pF GJM1552C1H7R4BB01#

±0.25pF GJM1552C1H7R4CB01#

±0.5pF GJM1552C1H7R4DB01#

7.5pF ±0.05pF GJM1552C1H7R5WB01#

±0.1pF GJM1552C1H7R5BB01#

±0.25pF GJM1552C1H7R5CB01#

±0.5pF GJM1552C1H7R5DB01#

7.6pF ±0.05pF GJM1552C1H7R6WB01#

±0.1pF GJM1552C1H7R6BB01#

±0.25pF GJM1552C1H7R6CB01#

±0.5pF GJM1552C1H7R6DB01#

7.7pF ±0.05pF GJM1552C1H7R7WB01#

±0.1pF GJM1552C1H7R7BB01#

±0.25pF GJM1552C1H7R7CB01#

±0.5pF GJM1552C1H7R7DB01#

7.8pF ±0.05pF GJM1552C1H7R8WB01#

±0.1pF GJM1552C1H7R8BB01#

±0.25pF GJM1552C1H7R8CB01#

±0.5pF GJM1552C1H7R8DB01#

7.9pF ±0.05pF GJM1552C1H7R9WB01#

±0.1pF GJM1552C1H7R9BB01#

±0.25pF GJM1552C1H7R9CB01#

±0.5pF GJM1552C1H7R9DB01#

8.0pF ±0.05pF GJM1552C1H8R0WB01#

±0.1pF GJM1552C1H8R0BB01#

±0.25pF GJM1552C1H8R0CB01#

±0.5pF GJM1552C1H8R0DB01#

8.1pF ±0.05pF GJM1552C1H8R1WB01#

±0.1pF GJM1552C1H8R1BB01#

±0.25pF GJM1552C1H8R1CB01#

±0.5pF GJM1552C1H8R1DB01#

8.2pF ±0.05pF GJM1552C1H8R2WB01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

101

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 8.2pF ±0.1pF GJM1552C1H8R2BB01#

±0.25pF GJM1552C1H8R2CB01#

±0.5pF GJM1552C1H8R2DB01#

8.3pF ±0.05pF GJM1552C1H8R3WB01#

±0.1pF GJM1552C1H8R3BB01#

±0.25pF GJM1552C1H8R3CB01#

±0.5pF GJM1552C1H8R3DB01#

8.4pF ±0.05pF GJM1552C1H8R4WB01#

±0.1pF GJM1552C1H8R4BB01#

±0.25pF GJM1552C1H8R4CB01#

±0.5pF GJM1552C1H8R4DB01#

8.5pF ±0.05pF GJM1552C1H8R5WB01#

±0.1pF GJM1552C1H8R5BB01#

±0.25pF GJM1552C1H8R5CB01#

±0.5pF GJM1552C1H8R5DB01#

8.6pF ±0.05pF GJM1552C1H8R6WB01#

±0.1pF GJM1552C1H8R6BB01#

±0.25pF GJM1552C1H8R6CB01#

±0.5pF GJM1552C1H8R6DB01#

8.7pF ±0.05pF GJM1552C1H8R7WB01#

±0.1pF GJM1552C1H8R7BB01#

±0.25pF GJM1552C1H8R7CB01#

±0.5pF GJM1552C1H8R7DB01#

8.8pF ±0.05pF GJM1552C1H8R8WB01#

±0.1pF GJM1552C1H8R8BB01#

±0.25pF GJM1552C1H8R8CB01#

±0.5pF GJM1552C1H8R8DB01#

8.9pF ±0.05pF GJM1552C1H8R9WB01#

±0.1pF GJM1552C1H8R9BB01#

±0.25pF GJM1552C1H8R9CB01#

±0.5pF GJM1552C1H8R9DB01#

9.0pF ±0.05pF GJM1552C1H9R0WB01#

±0.1pF GJM1552C1H9R0BB01#

±0.25pF GJM1552C1H9R0CB01#

±0.5pF GJM1552C1H9R0DB01#

9.1pF ±0.05pF GJM1552C1H9R1WB01#

±0.1pF GJM1552C1H9R1BB01#

±0.25pF GJM1552C1H9R1CB01#

±0.5pF GJM1552C1H9R1DB01#

9.2pF ±0.05pF GJM1552C1H9R2WB01#

±0.1pF GJM1552C1H9R2BB01#

±0.25pF GJM1552C1H9R2CB01#

±0.5pF GJM1552C1H9R2DB01#

9.3pF ±0.05pF GJM1552C1H9R3WB01#

±0.1pF GJM1552C1H9R3BB01#

±0.25pF GJM1552C1H9R3CB01#

±0.5pF GJM1552C1H9R3DB01#

9.4pF ±0.05pF GJM1552C1H9R4WB01#

±0.1pF GJM1552C1H9R4BB01#

±0.25pF GJM1552C1H9R4CB01#

±0.5pF GJM1552C1H9R4DB01#

9.5pF ±0.05pF GJM1552C1H9R5WB01#

±0.1pF GJM1552C1H9R5BB01#

±0.25pF GJM1552C1H9R5CB01#

GJM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 9.5pF ±0.5pF GJM1552C1H9R5DB01#

9.6pF ±0.05pF GJM1552C1H9R6WB01#

±0.1pF GJM1552C1H9R6BB01#

±0.25pF GJM1552C1H9R6CB01#

±0.5pF GJM1552C1H9R6DB01#

9.7pF ±0.05pF GJM1552C1H9R7WB01#

±0.1pF GJM1552C1H9R7BB01#

±0.25pF GJM1552C1H9R7CB01#

±0.5pF GJM1552C1H9R7DB01#

9.8pF ±0.05pF GJM1552C1H9R8WB01#

±0.1pF GJM1552C1H9R8BB01#

±0.25pF GJM1552C1H9R8CB01#

±0.5pF GJM1552C1H9R8DB01#

9.9pF ±0.05pF GJM1552C1H9R9WB01#

±0.1pF GJM1552C1H9R9BB01#

±0.25pF GJM1552C1H9R9CB01#

±0.5pF GJM1552C1H9R9DB01#

10pF ±2% GJM1552C1H100GB01#

±5% GJM1552C1H100JB01#

11pF ±2% GJM1552C1H110GB01#

±5% GJM1552C1H110JB01#

12pF ±2% GJM1552C1H120GB01#

±5% GJM1552C1H120JB01#

13pF ±2% GJM1552C1H130GB01#

±5% GJM1552C1H130JB01#

15pF ±2% GJM1552C1H150GB01#

±5% GJM1552C1H150JB01#

16pF ±2% GJM1552C1H160GB01#

±5% GJM1552C1H160JB01#

18pF ±2% GJM1552C1H180GB01#

±5% GJM1552C1H180JB01#

20pF ±2% GJM1552C1H200GB01#

±5% GJM1552C1H200JB01#

22pF ±1% GJM1552C1H220FB01#

±2% GJM1552C1H220GB01#

±5% GJM1552C1H220JB01#

24pF ±1% GJM1552C1H240FB01#

±2% GJM1552C1H240GB01#

±5% GJM1552C1H240JB01#

27pF ±1% GJM1552C1H270FB01#

±2% GJM1552C1H270GB01#

±5% GJM1552C1H270JB01#

30pF ±1% GJM1552C1H300FB01#

±2% GJM1552C1H300GB01#

±5% GJM1552C1H300JB01#

33pF ±1% GJM1552C1H330FB01#

±2% GJM1552C1H330GB01#

±5% GJM1552C1H330JB01#

36pF ±1% GJM1552C1H360FB01#

±2% GJM1552C1H360GB01#

±5% GJM1552C1H360JB01#

39pF ±1% GJM1552C1H390FB01#

±2% GJM1552C1H390GB01#

±5% GJM1552C1H390JB01#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

102

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc CH 43pF ±1% GJM1552C1H430FB01#

±2% GJM1552C1H430GB01#

±5% GJM1552C1H430JB01#

47pF ±1% GJM1552C1H470FB01#

±2% GJM1552C1H470GB01#

±5% GJM1552C1H470JB01#

GJM Series Temperature Compensating Type HiQ Part Number List

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

103

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1HiQ and low ESR in UHF and microwave frequency bands.

2Highly conductive copper was adopted for the internal electrodes.

3Product compatible to tight tolerances.

4Achieved high withstand voltages.

5Ideal for improving the characteristics and reducing power consumption in RF equipment.

Capacitor for high frequency suitable for PA designs.

ege

HiQ

High Frequency GQM Series

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

104

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GQM Series Temperature Compensating Type HiQ Part Number List

c 1.6×0.8mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.8mm 250Vdc C0G 0.1pF ±0.1pF GQM1875C2ER10BB12#

0.2pF ±0.1pF GQM1875C2ER20BB12#

0.3pF ±0.1pF GQM1875C2ER30BB12#

±0.25pF GQM1875C2ER30CB12#

0.4pF ±0.1pF GQM1875C2ER40BB12#

±0.25pF GQM1875C2ER40CB12#

0.5pF ±0.1pF GQM1875C2ER50BB12#

±0.25pF GQM1875C2ER50CB12#

0.75pF ±0.1pF GQM1875C2ER75BB12#

±0.25pF GQM1875C2ER75CB12#

1.0pF ±0.1pF GQM1875C2E1R0BB12#

±0.25pF GQM1875C2E1R0CB12#

1.1pF ±0.1pF GQM1875C2E1R1BB12#

±0.25pF GQM1875C2E1R1CB12#

1.2pF ±0.1pF GQM1875C2E1R2BB12#

±0.25pF GQM1875C2E1R2CB12#

1.3pF ±0.1pF GQM1875C2E1R3BB12#

±0.25pF GQM1875C2E1R3CB12#

1.5pF ±0.1pF GQM1875C2E1R5BB12#

±0.25pF GQM1875C2E1R5CB12#

1.6pF ±0.1pF GQM1875C2E1R6BB12#

±0.25pF GQM1875C2E1R6CB12#

1.8pF ±0.1pF GQM1875C2E1R8BB12#

±0.25pF GQM1875C2E1R8CB12#

2.0pF ±0.1pF GQM1875C2E2R0BB12#

±0.25pF GQM1875C2E2R0CB12#

2.2pF ±0.1pF GQM1875C2E2R2BB12#

±0.25pF GQM1875C2E2R2CB12#

2.4pF ±0.1pF GQM1875C2E2R4BB12#

±0.25pF GQM1875C2E2R4CB12#

2.7pF ±0.1pF GQM1875C2E2R7BB12#

±0.25pF GQM1875C2E2R7CB12#

3.0pF ±0.1pF GQM1875C2E3R0BB12#

±0.25pF GQM1875C2E3R0CB12#

3.3pF ±0.1pF GQM1875C2E3R3BB12#

±0.25pF GQM1875C2E3R3CB12#

3.6pF ±0.1pF GQM1875C2E3R6BB12#

±0.25pF GQM1875C2E3R6CB12#

3.9pF ±0.1pF GQM1875C2E3R9BB12#

±0.25pF GQM1875C2E3R9CB12#

4.0pF ±0.1pF GQM1875C2E4R0BB12#

±0.25pF GQM1875C2E4R0CB12#

4.3pF ±0.1pF GQM1875C2E4R3BB12#

±0.25pF GQM1875C2E4R3CB12#

4.7pF ±0.1pF GQM1875C2E4R7BB12#

±0.25pF GQM1875C2E4R7CB12#

5.0pF ±0.1pF GQM1875C2E5R0BB12#

±0.25pF GQM1875C2E5R0CB12#

5.1pF ±0.25pF GQM1875C2E5R1CB12#

±0.5pF GQM1875C2E5R1DB12#

5.6pF ±0.25pF GQM1875C2E5R6CB12#

±0.5pF GQM1875C2E5R6DB12#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.8mm 250Vdc C0G 6.0pF ±0.25pF GQM1875C2E6R0CB12#

±0.5pF GQM1875C2E6R0DB12#

6.2pF ±0.25pF GQM1875C2E6R2CB12#

±0.5pF GQM1875C2E6R2DB12#

6.8pF ±0.25pF GQM1875C2E6R8CB12#

±0.5pF GQM1875C2E6R8DB12#

7.0pF ±0.25pF GQM1875C2E7R0CB12#

±0.5pF GQM1875C2E7R0DB12#

7.5pF ±0.25pF GQM1875C2E7R5CB12#

±0.5pF GQM1875C2E7R5DB12#

8.0pF ±0.25pF GQM1875C2E8R0CB12#

±0.5pF GQM1875C2E8R0DB12#

8.2pF ±0.25pF GQM1875C2E8R2CB12#

±0.5pF GQM1875C2E8R2DB12#

9.0pF ±0.25pF GQM1875C2E9R0CB12#

±0.5pF GQM1875C2E9R0DB12#

9.1pF ±0.25pF GQM1875C2E9R1CB12#

±0.5pF GQM1875C2E9R1DB12#

10pF ±2% GQM1875C2E100GB12#

±5% GQM1875C2E100JB12#

11pF ±2% GQM1875C2E110GB12#

±5% GQM1875C2E110JB12#

12pF ±2% GQM1875C2E120GB12#

±5% GQM1875C2E120JB12#

13pF ±2% GQM1875C2E130GB12#

±5% GQM1875C2E130JB12#

15pF ±2% GQM1875C2E150GB12#

±5% GQM1875C2E150JB12#

16pF ±2% GQM1875C2E160GB12#

±5% GQM1875C2E160JB12#

18pF ±2% GQM1875C2E180GB12#

±5% GQM1875C2E180JB12#

20pF ±2% GQM1875C2E200GB12#

±5% GQM1875C2E200JB12#

22pF ±2% GQM1875C2E220GB12#

±5% GQM1875C2E220JB12#

24pF ±2% GQM1875C2E240GB12#

±5% GQM1875C2E240JB12#

27pF ±2% GQM1875C2E270GB12#

±5% GQM1875C2E270JB12#

30pF ±2% GQM1875C2E300GB12#

±5% GQM1875C2E300JB12#

33pF ±2% GQM1875C2E330GB12#

±5% GQM1875C2E330JB12#

36pF ±2% GQM1875C2E360GB12#

±5% GQM1875C2E360JB12#

39pF ±2% GQM1875C2E390GB12#

±5% GQM1875C2E390JB12#

43pF ±2% GQM1875C2E430GB12#

±5% GQM1875C2E430JB12#

47pF ±2% GQM1875C2E470GB12#

±5% GQM1875C2E470JB12#

0.9mm 100Vdc C0G 0.5pF ±0.1pF GQM1885C2AR50BB01#

±0.25pF GQM1885C2AR50CB01#

C02E.pdf

Oct.1,2012

105

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc C0G 0.75pF ±0.1pF GQM1885C2AR75BB01#

±0.25pF GQM1885C2AR75CB01#

1.0pF ±0.1pF GQM1885C2A1R0BB01#

±0.25pF GQM1885C2A1R0CB01#

1.1pF ±0.1pF GQM1885C2A1R1BB01#

±0.25pF GQM1885C2A1R1CB01#

1.2pF ±0.1pF GQM1885C2A1R2BB01#

±0.25pF GQM1885C2A1R2CB01#

1.3pF ±0.1pF GQM1885C2A1R3BB01#

±0.25pF GQM1885C2A1R3CB01#

1.5pF ±0.1pF GQM1885C2A1R5BB01#

±0.25pF GQM1885C2A1R5CB01#

1.6pF ±0.1pF GQM1885C2A1R6BB01#

±0.25pF GQM1885C2A1R6CB01#

1.8pF ±0.1pF GQM1885C2A1R8BB01#

±0.25pF GQM1885C2A1R8CB01#

2.0pF ±0.1pF GQM1885C2A2R0BB01#

±0.25pF GQM1885C2A2R0CB01#

2.2pF ±0.1pF GQM1885C2A2R2BB01#

±0.25pF GQM1885C2A2R2CB01#

2.4pF ±0.1pF GQM1885C2A2R4BB01#

±0.25pF GQM1885C2A2R4CB01#

2.7pF ±0.1pF GQM1885C2A2R7BB01#

±0.25pF GQM1885C2A2R7CB01#

3.0pF ±0.1pF GQM1885C2A3R0BB01#

±0.25pF GQM1885C2A3R0CB01#

3.3pF ±0.1pF GQM1885C2A3R3BB01#

±0.25pF GQM1885C2A3R3CB01#

3.6pF ±0.1pF GQM1885C2A3R6BB01#

±0.25pF GQM1885C2A3R6CB01#

3.9pF ±0.1pF GQM1885C2A3R9BB01#

±0.25pF GQM1885C2A3R9CB01#

4.0pF ±0.1pF GQM1885C2A4R0BB01#

±0.25pF GQM1885C2A4R0CB01#

4.3pF ±0.1pF GQM1885C2A4R3BB01#

±0.25pF GQM1885C2A4R3CB01#

4.7pF ±0.1pF GQM1885C2A4R7BB01#

±0.25pF GQM1885C2A4R7CB01#

5.0pF ±0.1pF GQM1885C2A5R0BB01#

±0.25pF GQM1885C2A5R0CB01#

5.1pF ±0.25pF GQM1885C2A5R1CB01#

±0.5pF GQM1885C2A5R1DB01#

5.6pF ±0.25pF GQM1885C2A5R6CB01#

±0.5pF GQM1885C2A5R6DB01#

6.0pF ±0.25pF GQM1885C2A6R0CB01#

±0.5pF GQM1885C2A6R0DB01#

6.2pF ±0.25pF GQM1885C2A6R2CB01#

±0.5pF GQM1885C2A6R2DB01#

6.8pF ±0.25pF GQM1885C2A6R8CB01#

±0.5pF GQM1885C2A6R8DB01#

CK 0.5pF ±0.1pF GQM1884C2AR50BB01#

±0.25pF GQM1884C2AR50CB01#

0.75pF ±0.1pF GQM1884C2AR75BB01#

±0.25pF GQM1884C2AR75CB01#

GQM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 100Vdc CK 1.0pF ±0.1pF GQM1884C2A1R0BB01#

±0.25pF GQM1884C2A1R0CB01#

1.1pF ±0.1pF GQM1884C2A1R1BB01#

±0.25pF GQM1884C2A1R1CB01#

1.2pF ±0.1pF GQM1884C2A1R2BB01#

±0.25pF GQM1884C2A1R2CB01#

1.3pF ±0.1pF GQM1884C2A1R3BB01#

±0.25pF GQM1884C2A1R3CB01#

1.5pF ±0.1pF GQM1884C2A1R5BB01#

±0.25pF GQM1884C2A1R5CB01#

1.6pF ±0.1pF GQM1884C2A1R6BB01#

±0.25pF GQM1884C2A1R6CB01#

1.8pF ±0.1pF GQM1884C2A1R8BB01#

±0.25pF GQM1884C2A1R8CB01#

2.0pF ±0.1pF GQM1884C2A2R0BB01#

±0.25pF GQM1884C2A2R0CB01#

CJ 2.2pF ±0.1pF GQM1883C2A2R2BB01#

±0.25pF GQM1883C2A2R2CB01#

2.4pF ±0.1pF GQM1883C2A2R4BB01#

±0.25pF GQM1883C2A2R4CB01#

2.7pF ±0.1pF GQM1883C2A2R7BB01#

±0.25pF GQM1883C2A2R7CB01#

3.0pF ±0.1pF GQM1883C2A3R0BB01#

±0.25pF GQM1883C2A3R0CB01#

3.3pF ±0.1pF GQM1883C2A3R3BB01#

±0.25pF GQM1883C2A3R3CB01#

3.6pF ±0.1pF GQM1883C2A3R6BB01#

±0.25pF GQM1883C2A3R6CB01#

3.9pF ±0.1pF GQM1883C2A3R9BB01#

±0.25pF GQM1883C2A3R9CB01#

CH 4.0pF ±0.1pF GQM1882C2A4R0BB01#

±0.25pF GQM1882C2A4R0CB01#

4.3pF ±0.1pF GQM1882C2A4R3BB01#

±0.25pF GQM1882C2A4R3CB01#

4.7pF ±0.1pF GQM1882C2A4R7BB01#

±0.25pF GQM1882C2A4R7CB01#

5.0pF ±0.1pF GQM1882C2A5R0BB01#

±0.25pF GQM1882C2A5R0CB01#

5.1pF ±0.25pF GQM1882C2A5R1CB01#

±0.5pF GQM1882C2A5R1DB01#

5.6pF ±0.25pF GQM1882C2A5R6CB01#

±0.5pF GQM1882C2A5R6DB01#

6.0pF ±0.25pF GQM1882C2A6R0CB01#

±0.5pF GQM1882C2A6R0DB01#

6.2pF ±0.25pF GQM1882C2A6R2CB01#

±0.5pF GQM1882C2A6R2DB01#

6.8pF ±0.25pF GQM1882C2A6R8CB01#

±0.5pF GQM1882C2A6R8DB01#

50Vdc C0G 7.0pF ±0.25pF GQM1885C1H7R0CB01#

±0.5pF GQM1885C1H7R0DB01#

7.5pF ±0.25pF GQM1885C1H7R5CB01#

±0.5pF GQM1885C1H7R5DB01#

8.0pF ±0.25pF GQM1885C1H8R0CB01#

±0.5pF GQM1885C1H8R0DB01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

106

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 8.2pF ±0.25pF GQM1885C1H8R2CB01#

±0.5pF GQM1885C1H8R2DB01#

9.0pF ±0.25pF GQM1885C1H9R0CB01#

±0.5pF GQM1885C1H9R0DB01#

9.1pF ±0.25pF GQM1885C1H9R1CB01#

±0.5pF GQM1885C1H9R1DB01#

10pF ±2% GQM1885C1H100GB01#

±5% GQM1885C1H100JB01#

11pF ±2% GQM1885C1H110GB01#

±5% GQM1885C1H110JB01#

12pF ±2% GQM1885C1H120GB01#

±5% GQM1885C1H120JB01#

13pF ±2% GQM1885C1H130GB01#

±5% GQM1885C1H130JB01#

15pF ±2% GQM1885C1H150GB01#

±5% GQM1885C1H150JB01#

16pF ±2% GQM1885C1H160GB01#

±5% GQM1885C1H160JB01#

18pF ±2% GQM1885C1H180GB01#

±5% GQM1885C1H180JB01#

20pF ±2% GQM1885C1H200GB01#

±5% GQM1885C1H200JB01#

22pF ±2% GQM1885C1H220GB01#

±5% GQM1885C1H220JB01#

24pF ±2% GQM1885C1H240GB01#

±5% GQM1885C1H240JB01#

27pF ±2% GQM1885C1H270GB01#

±5% GQM1885C1H270JB01#

30pF ±2% GQM1885C1H300GB01#

±5% GQM1885C1H300JB01#

33pF ±2% GQM1885C1H330GB01#

±5% GQM1885C1H330JB01#

36pF ±2% GQM1885C1H360GB01#

±5% GQM1885C1H360JB01#

39pF ±2% GQM1885C1H390GB01#

±5% GQM1885C1H390JB01#

43pF ±2% GQM1885C1H430GB01#

±5% GQM1885C1H430JB01#

47pF ±2% GQM1885C1H470GB01#

±5% GQM1885C1H470JB01#

51pF ±2% GQM1885C1H510GB01#

±5% GQM1885C1H510JB01#

56pF ±2% GQM1885C1H560GB01#

±5% GQM1885C1H560JB01#

62pF ±2% GQM1885C1H620GB01#

±5% GQM1885C1H620JB01#

68pF ±2% GQM1885C1H680GB01#

±5% GQM1885C1H680JB01#

75pF ±2% GQM1885C1H750GB01#

±5% GQM1885C1H750JB01#

82pF ±2% GQM1885C1H820GB01#

±5% GQM1885C1H820JB01#

91pF ±2% GQM1885C1H910GB01#

±5% GQM1885C1H910JB01#

GQM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc C0G 100pF ±2% GQM1885C1H101GB01#

±5% GQM1885C1H101JB01#

CH 7.0pF ±0.25pF GQM1882C1H7R0CB01#

±0.5pF GQM1882C1H7R0DB01#

7.5pF ±0.25pF GQM1882C1H7R5CB01#

±0.5pF GQM1882C1H7R5DB01#

8.0pF ±0.25pF GQM1882C1H8R0CB01#

±0.5pF GQM1882C1H8R0DB01#

8.2pF ±0.25pF GQM1882C1H8R2CB01#

±0.5pF GQM1882C1H8R2DB01#

9.0pF ±0.25pF GQM1882C1H9R0CB01#

±0.5pF GQM1882C1H9R0DB01#

9.1pF ±0.25pF GQM1882C1H9R1CB01#

±0.5pF GQM1882C1H9R1DB01#

10pF ±2% GQM1882C1H100GB01#

±5% GQM1882C1H100JB01#

11pF ±2% GQM1882C1H110GB01#

±5% GQM1882C1H110JB01#

12pF ±2% GQM1882C1H120GB01#

±5% GQM1882C1H120JB01#

13pF ±2% GQM1882C1H130GB01#

±5% GQM1882C1H130JB01#

15pF ±2% GQM1882C1H150GB01#

±5% GQM1882C1H150JB01#

16pF ±2% GQM1882C1H160GB01#

±5% GQM1882C1H160JB01#

18pF ±2% GQM1882C1H180GB01#

±5% GQM1882C1H180JB01#

20pF ±2% GQM1882C1H200GB01#

±5% GQM1882C1H200JB01#

22pF ±2% GQM1882C1H220GB01#

±5% GQM1882C1H220JB01#

24pF ±2% GQM1882C1H240GB01#

±5% GQM1882C1H240JB01#

27pF ±2% GQM1882C1H270GB01#

±5% GQM1882C1H270JB01#

30pF ±2% GQM1882C1H300GB01#

±5% GQM1882C1H300JB01#

33pF ±2% GQM1882C1H330GB01#

±5% GQM1882C1H330JB01#

36pF ±2% GQM1882C1H360GB01#

±5% GQM1882C1H360JB01#

39pF ±2% GQM1882C1H390GB01#

±5% GQM1882C1H390JB01#

43pF ±2% GQM1882C1H430GB01#

±5% GQM1882C1H430JB01#

47pF ±2% GQM1882C1H470GB01#

±5% GQM1882C1H470JB01#

51pF ±2% GQM1882C1H510GB01#

±5% GQM1882C1H510JB01#

56pF ±2% GQM1882C1H560GB01#

±5% GQM1882C1H560JB01#

62pF ±2% GQM1882C1H620GB01#

±5% GQM1882C1H620JB01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

107

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.9mm 50Vdc CH 68pF ±2% GQM1882C1H680GB01#

±5% GQM1882C1H680JB01#

75pF ±2% GQM1882C1H750GB01#

±5% GQM1882C1H750JB01#

82pF ±2% GQM1882C1H820GB01#

±5% GQM1882C1H820JB01#

91pF ±2% GQM1882C1H910GB01#

±5% GQM1882C1H910JB01#

100pF ±2% GQM1882C1H101GB01#

±5% GQM1882C1H101JB01#

GQM Series Temperature Compensating Type HiQ Part Number List

c 2.0×1.25mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 100Vdc C0G 0.5pF ±0.1pF GQM2195C2AR50BB01#

±0.25pF GQM2195C2AR50CB01#

0.75pF ±0.1pF GQM2195C2AR75BB01#

±0.25pF GQM2195C2AR75CB01#

1.0pF ±0.1pF GQM2195C2A1R0BB01#

±0.25pF GQM2195C2A1R0CB01#

1.1pF ±0.1pF GQM2195C2A1R1BB01#

±0.25pF GQM2195C2A1R1CB01#

1.2pF ±0.1pF GQM2195C2A1R2BB01#

±0.25pF GQM2195C2A1R2CB01#

1.3pF ±0.1pF GQM2195C2A1R3BB01#

±0.25pF GQM2195C2A1R3CB01#

1.5pF ±0.1pF GQM2195C2A1R5BB01#

±0.25pF GQM2195C2A1R5CB01#

1.6pF ±0.1pF GQM2195C2A1R6BB01#

±0.25pF GQM2195C2A1R6CB01#

1.8pF ±0.1pF GQM2195C2A1R8BB01#

±0.25pF GQM2195C2A1R8CB01#

2.0pF ±0.1pF GQM2195C2A2R0BB01#

±0.25pF GQM2195C2A2R0CB01#

2.2pF ±0.1pF GQM2195C2A2R2BB01#

±0.25pF GQM2195C2A2R2CB01#

2.4pF ±0.1pF GQM2195C2A2R4BB01#

±0.25pF GQM2195C2A2R4CB01#

2.7pF ±0.1pF GQM2195C2A2R7BB01#

±0.25pF GQM2195C2A2R7CB01#

3.0pF ±0.1pF GQM2195C2A3R0BB01#

±0.25pF GQM2195C2A3R0CB01#

3.3pF ±0.1pF GQM2195C2A3R3BB01#

±0.25pF GQM2195C2A3R3CB01#

3.6pF ±0.1pF GQM2195C2A3R6BB01#

±0.25pF GQM2195C2A3R6CB01#

3.9pF ±0.1pF GQM2195C2A3R9BB01#

±0.25pF GQM2195C2A3R9CB01#

4.0pF ±0.1pF GQM2195C2A4R0BB01#

±0.25pF GQM2195C2A4R0CB01#

4.3pF ±0.1pF GQM2195C2A4R3BB01#

±0.25pF GQM2195C2A4R3CB01#

4.7pF ±0.1pF GQM2195C2A4R7BB01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 100Vdc C0G 4.7pF ±0.25pF GQM2195C2A4R7CB01#

5.0pF ±0.1pF GQM2195C2A5R0BB01#

±0.25pF GQM2195C2A5R0CB01#

5.1pF ±0.25pF GQM2195C2A5R1CB01#

±0.5pF GQM2195C2A5R1DB01#

5.6pF ±0.25pF GQM2195C2A5R6CB01#

±0.5pF GQM2195C2A5R6DB01#

6.0pF ±0.25pF GQM2195C2A6R0CB01#

±0.5pF GQM2195C2A6R0DB01#

6.2pF ±0.25pF GQM2195C2A6R2CB01#

±0.5pF GQM2195C2A6R2DB01#

6.8pF ±0.25pF GQM2195C2A6R8CB01#

±0.5pF GQM2195C2A6R8DB01#

7.0pF ±0.25pF GQM2195C2A7R0CB01#

±0.5pF GQM2195C2A7R0DB01#

7.5pF ±0.25pF GQM2195C2A7R5CB01#

±0.5pF GQM2195C2A7R5DB01#

8.0pF ±0.25pF GQM2195C2A8R0CB01#

±0.5pF GQM2195C2A8R0DB01#

8.2pF ±0.25pF GQM2195C2A8R2CB01#

±0.5pF GQM2195C2A8R2DB01#

9.0pF ±0.25pF GQM2195C2A9R0CB01#

±0.5pF GQM2195C2A9R0DB01#

9.1pF ±0.25pF GQM2195C2A9R1CB01#

±0.5pF GQM2195C2A9R1DB01#

10pF ±2% GQM2195C2A100GB01#

±5% GQM2195C2A100JB01#

11pF ±2% GQM2195C2A110GB01#

±5% GQM2195C2A110JB01#

12pF ±2% GQM2195C2A120GB01#

±5% GQM2195C2A120JB01#

13pF ±2% GQM2195C2A130GB01#

±5% GQM2195C2A130JB01#

15pF ±2% GQM2195C2A150GB01#

±5% GQM2195C2A150JB01#

16pF ±2% GQM2195C2A160GB01#

±5% GQM2195C2A160JB01#

18pF ±2% GQM2195C2A180GB01#

±5% GQM2195C2A180JB01#

CK 0.5pF ±0.1pF GQM2194C2AR50BB01#

±0.25pF GQM2194C2AR50CB01#

0.75pF ±0.1pF GQM2194C2AR75BB01#

±0.25pF GQM2194C2AR75CB01#

1.0pF ±0.1pF GQM2194C2A1R0BB01#

±0.25pF GQM2194C2A1R0CB01#

1.1pF ±0.1pF GQM2194C2A1R1BB01#

±0.25pF GQM2194C2A1R1CB01#

1.2pF ±0.1pF GQM2194C2A1R2BB01#

±0.25pF GQM2194C2A1R2CB01#

1.3pF ±0.1pF GQM2194C2A1R3BB01#

±0.25pF GQM2194C2A1R3CB01#

1.5pF ±0.1pF GQM2194C2A1R5BB01#

±0.25pF GQM2194C2A1R5CB01#

1.6pF ±0.1pF GQM2194C2A1R6BB01#

(→ c 1.6×0.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

108

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 100Vdc CK 1.6pF ±0.25pF GQM2194C2A1R6CB01#

1.8pF ±0.1pF GQM2194C2A1R8BB01#

±0.25pF GQM2194C2A1R8CB01#

2.0pF ±0.1pF GQM2194C2A2R0BB01#

±0.25pF GQM2194C2A2R0CB01#

CJ 2.2pF ±0.1pF GQM2193C2A2R2BB01#

±0.25pF GQM2193C2A2R2CB01#

2.4pF ±0.1pF GQM2193C2A2R4BB01#

±0.25pF GQM2193C2A2R4CB01#

2.7pF ±0.1pF GQM2193C2A2R7BB01#

±0.25pF GQM2193C2A2R7CB01#

3.0pF ±0.1pF GQM2193C2A3R0BB01#

±0.25pF GQM2193C2A3R0CB01#

3.3pF ±0.1pF GQM2193C2A3R3BB01#

±0.25pF GQM2193C2A3R3CB01#

3.6pF ±0.1pF GQM2193C2A3R6BB01#

±0.25pF GQM2193C2A3R6CB01#

3.9pF ±0.1pF GQM2193C2A3R9BB01#

±0.25pF GQM2193C2A3R9CB01#

CH 4.0pF ±0.1pF GQM2192C2A4R0BB01#

±0.25pF GQM2192C2A4R0CB01#

4.3pF ±0.1pF GQM2192C2A4R3BB01#

±0.25pF GQM2192C2A4R3CB01#

4.7pF ±0.1pF GQM2192C2A4R7BB01#

±0.25pF GQM2192C2A4R7CB01#

5.0pF ±0.1pF GQM2192C2A5R0BB01#

±0.25pF GQM2192C2A5R0CB01#

5.1pF ±0.25pF GQM2192C2A5R1CB01#

±0.5pF GQM2192C2A5R1DB01#

5.6pF ±0.25pF GQM2192C2A5R6CB01#

±0.5pF GQM2192C2A5R6DB01#

6.0pF ±0.25pF GQM2192C2A6R0CB01#

±0.5pF GQM2192C2A6R0DB01#

6.2pF ±0.25pF GQM2192C2A6R2CB01#

±0.5pF GQM2192C2A6R2DB01#

6.8pF ±0.25pF GQM2192C2A6R8CB01#

±0.5pF GQM2192C2A6R8DB01#

7.0pF ±0.25pF GQM2192C2A7R0CB01#

±0.5pF GQM2192C2A7R0DB01#

7.5pF ±0.25pF GQM2192C2A7R5CB01#

±0.5pF GQM2192C2A7R5DB01#

8.0pF ±0.25pF GQM2192C2A8R0CB01#

±0.5pF GQM2192C2A8R0DB01#

8.2pF ±0.25pF GQM2192C2A8R2CB01#

±0.5pF GQM2192C2A8R2DB01#

9.0pF ±0.25pF GQM2192C2A9R0CB01#

±0.5pF GQM2192C2A9R0DB01#

9.1pF ±0.25pF GQM2192C2A9R1CB01#

±0.5pF GQM2192C2A9R1DB01#

10pF ±2% GQM2192C2A100GB01#

±5% GQM2192C2A100JB01#

11pF ±2% GQM2192C2A110GB01#

±5% GQM2192C2A110JB01#

12pF ±2% GQM2192C2A120GB01#

GQM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 100Vdc CH 12pF ±5% GQM2192C2A120JB01#

13pF ±2% GQM2192C2A130GB01#

±5% GQM2192C2A130JB01#

15pF ±2% GQM2192C2A150GB01#

±5% GQM2192C2A150JB01#

16pF ±2% GQM2192C2A160GB01#

±5% GQM2192C2A160JB01#

18pF ±2% GQM2192C2A180GB01#

±5% GQM2192C2A180JB01#

50Vdc C0G 20pF ±2% GQM2195C1H200GB01#

±5% GQM2195C1H200JB01#

22pF ±2% GQM2195C1H220GB01#

±5% GQM2195C1H220JB01#

24pF ±2% GQM2195C1H240GB01#

±5% GQM2195C1H240JB01#

27pF ±2% GQM2195C1H270GB01#

±5% GQM2195C1H270JB01#

30pF ±2% GQM2195C1H300GB01#

±5% GQM2195C1H300JB01#

33pF ±2% GQM2195C1H330GB01#

±5% GQM2195C1H330JB01#

36pF ±2% GQM2195C1H360GB01#

±5% GQM2195C1H360JB01#

39pF ±2% GQM2195C1H390GB01#

±5% GQM2195C1H390JB01#

43pF ±2% GQM2195C1H430GB01#

±5% GQM2195C1H430JB01#

47pF ±2% GQM2195C1H470GB01#

±5% GQM2195C1H470JB01#

51pF ±2% GQM2195C1H510GB01#

±5% GQM2195C1H510JB01#

56pF ±2% GQM2195C1H560GB01#

±5% GQM2195C1H560JB01#

62pF ±2% GQM2195C1H620GB01#

±5% GQM2195C1H620JB01#

68pF ±2% GQM2195C1H680GB01#

±5% GQM2195C1H680JB01#

75pF ±2% GQM2195C1H750GB01#

±5% GQM2195C1H750JB01#

82pF ±2% GQM2195C1H820GB01#

±5% GQM2195C1H820JB01#

91pF ±2% GQM2195C1H910GB01#

±5% GQM2195C1H910JB01#

100pF ±2% GQM2195C1H101GB01#

±5% GQM2195C1H101JB01#

CH 20pF ±2% GQM2192C1H200GB01#

±5% GQM2192C1H200JB01#

22pF ±2% GQM2192C1H220GB01#

±5% GQM2192C1H220JB01#

24pF ±2% GQM2192C1H240GB01#

±5% GQM2192C1H240JB01#

27pF ±2% GQM2192C1H270GB01#

±5% GQM2192C1H270JB01#

30pF ±2% GQM2192C1H300GB01#

(→ c 2.0×1.25mm)

C02E.pdf

Oct.1,2012

109

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.95mm 50Vdc CH 30pF ±5% GQM2192C1H300JB01#

33pF ±2% GQM2192C1H330GB01#

±5% GQM2192C1H330JB01#

36pF ±2% GQM2192C1H360GB01#

±5% GQM2192C1H360JB01#

39pF ±2% GQM2192C1H390GB01#

±5% GQM2192C1H390JB01#

43pF ±2% GQM2192C1H430GB01#

±5% GQM2192C1H430JB01#

47pF ±2% GQM2192C1H470GB01#

±5% GQM2192C1H470JB01#

51pF ±2% GQM2192C1H510GB01#

±5% GQM2192C1H510JB01#

56pF ±2% GQM2192C1H560GB01#

±5% GQM2192C1H560JB01#

62pF ±2% GQM2192C1H620GB01#

±5% GQM2192C1H620JB01#

68pF ±2% GQM2192C1H680GB01#

±5% GQM2192C1H680JB01#

75pF ±2% GQM2192C1H750GB01#

±5% GQM2192C1H750JB01#

82pF ±2% GQM2192C1H820GB01#

±5% GQM2192C1H820JB01#

91pF ±2% GQM2192C1H910GB01#

±5% GQM2192C1H910JB01#

100pF ±2% GQM2192C1H101GB01#

±5% GQM2192C1H101JB01#

1mm 250Vdc C0G 0.5pF ±0.1pF GQM2195C2ER50BB12#

±0.25pF GQM2195C2ER50CB12#

0.75pF ±0.1pF GQM2195C2ER75BB12#

±0.25pF GQM2195C2ER75CB12#

1.0pF ±0.1pF GQM2195C2E1R0BB12#

±0.25pF GQM2195C2E1R0CB12#

1.1pF ±0.1pF GQM2195C2E1R1BB12#

±0.25pF GQM2195C2E1R1CB12#

1.2pF ±0.1pF GQM2195C2E1R2BB12#

±0.25pF GQM2195C2E1R2CB12#

1.3pF ±0.1pF GQM2195C2E1R3BB12#

±0.25pF GQM2195C2E1R3CB12#

1.5pF ±0.1pF GQM2195C2E1R5BB12#

±0.25pF GQM2195C2E1R5CB12#

1.6pF ±0.1pF GQM2195C2E1R6BB12#

±0.25pF GQM2195C2E1R6CB12#

1.8pF ±0.1pF GQM2195C2E1R8BB12#

±0.25pF GQM2195C2E1R8CB12#

2.0pF ±0.1pF GQM2195C2E2R0BB12#

±0.25pF GQM2195C2E2R0CB12#

2.2pF ±0.1pF GQM2195C2E2R2BB12#

±0.25pF GQM2195C2E2R2CB12#

2.4pF ±0.1pF GQM2195C2E2R4BB12#

±0.25pF GQM2195C2E2R4CB12#

2.7pF ±0.1pF GQM2195C2E2R7BB12#

±0.25pF GQM2195C2E2R7CB12#

3.0pF ±0.1pF GQM2195C2E3R0BB12#

GQM Series Temperature Compensating Type HiQ Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

1mm 250Vdc C0G 3.0pF ±0.25pF GQM2195C2E3R0CB12#

3.3pF ±0.1pF GQM2195C2E3R3BB12#

±0.25pF GQM2195C2E3R3CB12#

3.6pF ±0.1pF GQM2195C2E3R6BB12#

±0.25pF GQM2195C2E3R6CB12#

3.9pF ±0.1pF GQM2195C2E3R9BB12#

±0.25pF GQM2195C2E3R9CB12#

4.0pF ±0.1pF GQM2195C2E4R0BB12#

±0.25pF GQM2195C2E4R0CB12#

4.3pF ±0.1pF GQM2195C2E4R3BB12#

±0.25pF GQM2195C2E4R3CB12#

4.7pF ±0.1pF GQM2195C2E4R7BB12#

±0.25pF GQM2195C2E4R7CB12#

5.0pF ±0.1pF GQM2195C2E5R0BB12#

±0.25pF GQM2195C2E5R0CB12#

5.1pF ±0.25pF GQM2195C2E5R1CB12#

±0.5pF GQM2195C2E5R1DB12#

5.6pF ±0.25pF GQM2195C2E5R6CB12#

±0.5pF GQM2195C2E5R6DB12#

6.0pF ±0.25pF GQM2195C2E6R0CB12#

±0.5pF GQM2195C2E6R0DB12#

6.2pF ±0.25pF GQM2195C2E6R2CB12#

±0.5pF GQM2195C2E6R2DB12#

6.8pF ±0.25pF GQM2195C2E6R8CB12#

±0.5pF GQM2195C2E6R8DB12#

7.0pF ±0.25pF GQM2195C2E7R0CB12#

±0.5pF GQM2195C2E7R0DB12#

7.5pF ±0.25pF GQM2195C2E7R5CB12#

±0.5pF GQM2195C2E7R5DB12#

8.0pF ±0.25pF GQM2195C2E8R0CB12#

±0.5pF GQM2195C2E8R0DB12#

8.2pF ±0.25pF GQM2195C2E8R2CB12#

±0.5pF GQM2195C2E8R2DB12#

9.0pF ±0.25pF GQM2195C2E9R0CB12#

±0.5pF GQM2195C2E9R0DB12#

9.1pF ±0.25pF GQM2195C2E9R1CB12#

±0.5pF GQM2195C2E9R1DB12#

10pF ±2% GQM2195C2E100GB12#

±5% GQM2195C2E100JB12#

11pF ±2% GQM2195C2E110GB12#

±5% GQM2195C2E110JB12#

12pF ±2% GQM2195C2E120GB12#

±5% GQM2195C2E120JB12#

13pF ±2% GQM2195C2E130GB12#

±5% GQM2195C2E130JB12#

15pF ±2% GQM2195C2E150GB12#

±5% GQM2195C2E150JB12#

16pF ±2% GQM2195C2E160GB12#

±5% GQM2195C2E160JB12#

18pF ±2% GQM2195C2E180GB12#

±5% GQM2195C2E180JB12#

20pF ±2% GQM2195C2E200GB12#

±5% GQM2195C2E200JB12#

22pF ±2% GQM2195C2E220GB12#

(→ c 2.0×1.25mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

110

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

1mm 250Vdc C0G 22pF ±5% GQM2195C2E220JB12#

24pF ±2% GQM2195C2E240GB12#

±5% GQM2195C2E240JB12#

27pF ±2% GQM2195C2E270GB12#

±5% GQM2195C2E270JB12#

30pF ±2% GQM2195C2E300GB12#

±5% GQM2195C2E300JB12#

33pF ±2% GQM2195C2E330GB12#

±5% GQM2195C2E330JB12#

36pF ±2% GQM2195C2E360GB12#

±5% GQM2195C2E360JB12#

39pF ±2% GQM2195C2E390GB12#

±5% GQM2195C2E390JB12#

43pF ±2% GQM2195C2E430GB12#

±5% GQM2195C2E430JB12#

47pF ±2% GQM2195C2E470GB12#

±5% GQM2195C2E470JB12#

51pF ±2% GQM2195C2E510GB12#

±5% GQM2195C2E510JB12#

56pF ±2% GQM2195C2E560GB12#

±5% GQM2195C2E560JB12#

62pF ±2% GQM2195C2E620GB12#

±5% GQM2195C2E620JB12#

68pF ±2% GQM2195C2E680GB12#

±5% GQM2195C2E680JB12#

75pF ±2% GQM2195C2E750GB12#

±5% GQM2195C2E750JB12#

82pF ±2% GQM2195C2E820GB12#

±5% GQM2195C2E820JB12#

91pF ±2% GQM2195C2E910GB12#

±5% GQM2195C2E910JB12#

100pF ±2% GQM2195C2E101GB12#

±5% GQM2195C2E101JB12#

GQM Series Temperature Compensating Type HiQ Part Number List

c 2.8×2.8mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

1.35mm 500Vdc C0G 0.5pF ±0.1pF GQM22M5C2HR50BB01#

±0.25pF GQM22M5C2HR50CB01#

0.75pF ±0.1pF GQM22M5C2HR75BB01#

±0.25pF GQM22M5C2HR75CB01#

1.0pF ±0.1pF GQM22M5C2H1R0BB01#

±0.25pF GQM22M5C2H1R0CB01#

1.1pF ±0.1pF GQM22M5C2H1R1BB01#

±0.25pF GQM22M5C2H1R1CB01#

1.2pF ±0.1pF GQM22M5C2H1R2BB01#

±0.25pF GQM22M5C2H1R2CB01#

1.3pF ±0.1pF GQM22M5C2H1R3BB01#

±0.25pF GQM22M5C2H1R3CB01#

1.5pF ±0.1pF GQM22M5C2H1R5BB01#

±0.25pF GQM22M5C2H1R5CB01#

1.6pF ±0.1pF GQM22M5C2H1R6BB01#

±0.25pF GQM22M5C2H1R6CB01#

max.

Rated

Voltage

Code Cap. Tol. Part Number

1.35mm 500Vdc C0G 1.8pF ±0.1pF GQM22M5C2H1R8BB01#

±0.25pF GQM22M5C2H1R8CB01#

2.0pF ±0.1pF GQM22M5C2H2R0BB01#

±0.25pF GQM22M5C2H2R0CB01#

2.2pF ±0.1pF GQM22M5C2H2R2BB01#

±0.25pF GQM22M5C2H2R2CB01#

2.4pF ±0.1pF GQM22M5C2H2R4BB01#

±0.25pF GQM22M5C2H2R4CB01#

2.7pF ±0.1pF GQM22M5C2H2R7BB01#

±0.25pF GQM22M5C2H2R7CB01#

3.0pF ±0.1pF GQM22M5C2H3R0BB01#

±0.25pF GQM22M5C2H3R0CB01#

3.3pF ±0.1pF GQM22M5C2H3R3BB01#

±0.25pF GQM22M5C2H3R3CB01#

3.6pF ±0.1pF GQM22M5C2H3R6BB01#

±0.25pF GQM22M5C2H3R6CB01#

3.9pF ±0.1pF GQM22M5C2H3R9BB01#

±0.25pF GQM22M5C2H3R9CB01#

4.0pF ±0.1pF GQM22M5C2H4R0BB01#

±0.25pF GQM22M5C2H4R0CB01#

4.3pF ±0.1pF GQM22M5C2H4R3BB01#

±0.25pF GQM22M5C2H4R3CB01#

4.7pF ±0.1pF GQM22M5C2H4R7BB01#

±0.25pF GQM22M5C2H4R7CB01#

5.0pF ±0.1pF GQM22M5C2H5R0BB01#

±0.25pF GQM22M5C2H5R0CB01#

5.1pF ±0.25pF GQM22M5C2H5R1CB01#

±0.5pF GQM22M5C2H5R1DB01#

5.6pF ±0.25pF GQM22M5C2H5R6CB01#

±0.5pF GQM22M5C2H5R6DB01#

6.0pF ±0.25pF GQM22M5C2H6R0CB01#

±0.5pF GQM22M5C2H6R0DB01#

6.2pF ±0.25pF GQM22M5C2H6R2CB01#

±0.5pF GQM22M5C2H6R2DB01#

6.8pF ±0.25pF GQM22M5C2H6R8CB01#

±0.5pF GQM22M5C2H6R8DB01#

7.0pF ±0.25pF GQM22M5C2H7R0CB01#

±0.5pF GQM22M5C2H7R0DB01#

7.5pF ±0.25pF GQM22M5C2H7R5CB01#

±0.5pF GQM22M5C2H7R5DB01#

8.0pF ±0.25pF GQM22M5C2H8R0CB01#

±0.5pF GQM22M5C2H8R0DB01#

8.2pF ±0.25pF GQM22M5C2H8R2CB01#

±0.5pF GQM22M5C2H8R2DB01#

9.0pF ±0.25pF GQM22M5C2H9R0CB01#

±0.5pF GQM22M5C2H9R0DB01#

9.1pF ±0.25pF GQM22M5C2H9R1CB01#

±0.5pF GQM22M5C2H9R1DB01#

10pF ±2% GQM22M5C2H100GB01#

±5% GQM22M5C2H100JB01#

11pF ±2% GQM22M5C2H110GB01#

±5% GQM22M5C2H110JB01#

12pF ±2% GQM22M5C2H120GB01#

±5% GQM22M5C2H120JB01#

(→ c 2.0×1.25mm)

C02E.pdf

Oct.1,2012

111

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

1.35mm 500Vdc C0G 13pF ±2% GQM22M5C2H130GB01#

±5% GQM22M5C2H130JB01#

15pF ±2% GQM22M5C2H150GB01#

±5% GQM22M5C2H150JB01#

16pF ±2% GQM22M5C2H160GB01#

±5% GQM22M5C2H160JB01#

18pF ±2% GQM22M5C2H180GB01#

±5% GQM22M5C2H180JB01#

20pF ±2% GQM22M5C2H200GB01#

±5% GQM22M5C2H200JB01#

22pF ±2% GQM22M5C2H220GB01#

±5% GQM22M5C2H220JB01#

24pF ±2% GQM22M5C2H240GB01#

±5% GQM22M5C2H240JB01#

27pF ±2% GQM22M5C2H270GB01#

±5% GQM22M5C2H270JB01#

30pF ±2% GQM22M5C2H300GB01#

±5% GQM22M5C2H300JB01#

33pF ±2% GQM22M5C2H330GB01#

±5% GQM22M5C2H330JB01#

36pF ±2% GQM22M5C2H360GB01#

±5% GQM22M5C2H360JB01#

39pF ±2% GQM22M5C2H390GB01#

±5% GQM22M5C2H390JB01#

43pF ±2% GQM22M5C2H430GB01#

±5% GQM22M5C2H430JB01#

47pF ±2% GQM22M5C2H470GB01#

±5% GQM22M5C2H470JB01#

51pF ±2% GQM22M5C2H510GB01#

±5% GQM22M5C2H510JB01#

56pF ±2% GQM22M5C2H560GB01#

±5% GQM22M5C2H560JB01#

62pF ±2% GQM22M5C2H620GB01#

±5% GQM22M5C2H620JB01#

68pF ±2% GQM22M5C2H680GB01#

±5% GQM22M5C2H680JB01#

75pF ±2% GQM22M5C2H750GB01#

±5% GQM22M5C2H750JB01#

82pF ±2% GQM22M5C2H820GB01#

±5% GQM22M5C2H820JB01#

91pF ±2% GQM22M5C2H910GB01#

±5% GQM22M5C2H910JB01#

100pF ±2% GQM22M5C2H101GB01#

±5% GQM22M5C2H101JB01#

GQM Series Temperature Compensating Type HiQ Part Number List

(→ c 2.8×2.8mm)

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

112

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1Excellent high frequency characteristics.

2Ideal for bypass applications.

3High density mounting is possible.

Capacitor for wire bonding. Can also be mounted directly to a frame!!

Monolithic Microchip GMA Series

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

113

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GMA Series High Dielectric Constant Type Part Number List

c 0.38×0.38mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.35mm 10Vdc X7R 10000pF ±20% GMA0D3R71A103MA01#

R 10000pF ±20% GMA0D3R11A103MA01#

c 0.5×0.5mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.4mm 100Vdc X7R 100pF ±20% GMA05XR72A101MA01#

150pF ±20% GMA05XR72A151MA01#

220pF ±20% GMA05XR72A221MA01#

330pF ±20% GMA05XR72A331MA01#

470pF ±20% GMA05XR72A471MA01#

680pF ±20% GMA05XR72A681MA01#

1000pF ±20% GMA05XR72A102MA01#

25Vdc X7R 1500pF ±20% GMA05XR71E152MA11#

2200pF ±20% GMA05XR71E222MA11#

3300pF ±20% GMA05XR71E332MA11#

4700pF ±20% GMA05XR71E472MA11#

B 1500pF ±20% GMA05XB31E152MA11#

2200pF ±20% GMA05XB31E222MA11#

3300pF ±20% GMA05XB31E332MA11#

4700pF ±20% GMA05XB31E472MA11#

10Vdc X7R 6800pF ±20% GMA05XR71A682MA01#

10000pF ±20% GMA05XR71A103MA01#

15000pF ±20% GMA05XR71A153MA01#

22000pF ±20% GMA05XR71A223MA01#

R 6800pF ±20% GMA05XR11A682MA01#

10000pF ±20% GMA05XR11A103MA01#

15000pF ±20% GMA05XR11A153MA01#

22000pF ±20% GMA05XR11A223MA01#

B 6800pF ±20% GMA05XB11A682MA01#

10000pF ±20% GMA05XB11A103MA01#

15000pF ±20% GMA05XB11A153MA01#

22000pF ±20% GMA05XB11A223MA01#

6.3Vdc X5R 0.1µF ±20% GMA05XR60J104ME12#

B 0.1µF ±20% GMA05XB30J104ME12#

c 0.8×0.8mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.6mm 100Vdc X7R 1500pF ±20% GMA085R72A152MA01#

2200pF ±20% GMA085R72A222MA01#

3300pF ±20% GMA085R72A332MA01#

4700pF ±20% GMA085R72A472MA01#

6800pF ±20% GMA085R72A682MA01#

25Vdc X7R 10000pF ±20% GMA085R71E103MA11#

15000pF ±20% GMA085R71E153MA11#

22000pF ±20% GMA085R71E223MA11#

B 10000pF ±20% GMA085B31E103MA11#

15000pF ±20% GMA085B31E153MA11#

22000pF ±20% GMA085B31E223MA11#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.6mm 10Vdc X7R 33000pF ±20% GMA085R71A333MA01#

47000pF ±20% GMA085R71A473MA01#

68000pF ±20% GMA085R71A683MA01#

0.1µF ±20% GMA085R71A104MA01#

R 33000pF ±20% GMA085R11A333MA01#

47000pF ±20% GMA085R11A473MA01#

68000pF ±20% GMA085R11A683MA01#

0.1µF ±20% GMA085R11A104MA01#

B 33000pF ±20% GMA085B11A333MA01#

47000pF ±20% GMA085B11A473MA01#

68000pF ±20% GMA085B11A683MA01#

0.1µF ±20% GMA085B11A104MA01#

6.3Vdc X5R 0.47µF ±20% GMA085R60J474ME12#

B 0.47µF ±20% GMA085B30J474ME12#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

114

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

1Compact product sizes of 0.6x0.3x0.3mm, 1.0x0.5x0.5mm

2Can be mounted by wire bonding and AuSn soldering.

3Ideal for mounting in optical communication related devices and IC packages.

Capacitor for wire bonding. Compatible up to 0.6x0.3mm size!!

ege

For Bonding GMD Series

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

115

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

GMD Series High Dielectric Constant Type Part Number List

c 0.6×0.3mm

Ultra-

compact

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 25Vdc X7R 100pF ±10% GMD033R71E101KA01#

120pF ±10% GMD033R71E121KA01#

150pF ±10% GMD033R71E151KA01#

180pF ±10% GMD033R71E181KA01#

220pF ±10% GMD033R71E221KA01#

270pF ±10% GMD033R71E271KA01#

330pF ±10% GMD033R71E331KA01#

390pF ±10% GMD033R71E391KA01#

470pF ±10% GMD033R71E471KA01#

560pF ±10% GMD033R71E561KA01#

680pF ±10% GMD033R71E681KA01#

820pF ±10% GMD033R71E821KA01#

1000pF ±10% GMD033R71E102KA01#

1200pF ±10% GMD033R71E122KA01#

1500pF ±10% GMD033R71E152KA01#

R 100pF ±10% GMD033R11E101KA01#

120pF ±10% GMD033R11E121KA01#

150pF ±10% GMD033R11E151KA01#

180pF ±10% GMD033R11E181KA01#

220pF ±10% GMD033R11E221KA01#

270pF ±10% GMD033R11E271KA01#

330pF ±10% GMD033R11E331KA01#

390pF ±10% GMD033R11E391KA01#

470pF ±10% GMD033R11E471KA01#

560pF ±10% GMD033R11E561KA01#

680pF ±10% GMD033R11E681KA01#

820pF ±10% GMD033R11E821KA01#

1000pF ±10% GMD033R11E102KA01#

1200pF ±10% GMD033R11E122KA01#

1500pF ±10% GMD033R11E152KA01#

B 100pF ±10% GMD033B11E101KA01#

120pF ±10% GMD033B11E121KA01#

150pF ±10% GMD033B11E151KA01#

180pF ±10% GMD033B11E181KA01#

220pF ±10% GMD033B11E221KA01#

270pF ±10% GMD033B11E271KA01#

330pF ±10% GMD033B11E331KA01#

390pF ±10% GMD033B11E391KA01#

470pF ±10% GMD033B11E471KA01#

560pF ±10% GMD033B11E561KA01#

680pF ±10% GMD033B11E681KA01#

820pF ±10% GMD033B11E821KA01#

1000pF ±10% GMD033B11E102KA01#

1200pF ±10% GMD033B11E122KA01#

1500pF ±10% GMD033B11E152KA01#

16Vdc X7R 1800pF ±10% GMD033R71C182KA11#

2200pF ±10% GMD033R71C222KA11#

2700pF ±10% GMD033R71C272KA11#

3300pF ±10% GMD033R71C332KA11#

R 1800pF ±10% GMD033R11C182KA11#

2200pF ±10% GMD033R11C222KA11#

2700pF ±10% GMD033R11C272KA11#

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.33mm 16Vdc R 3300pF ±10% GMD033R11C332KA11#

B 1800pF ±10% GMD033B31C182KA11#

2200pF ±10% GMD033B31C222KA11#

2700pF ±10% GMD033B31C272KA11#

3300pF ±10% GMD033B31C332KA11#

10Vdc X7R 3900pF ±10% GMD033R71A392KA01#

4700pF ±10% GMD033R71A472KA01#

5600pF ±10% GMD033R71A562KA01#

6800pF ±10% GMD033R71A682KA01#

8200pF ±10% GMD033R71A822KA01#

10000pF ±10% GMD033R71A103KA01#

R 3900pF ±10% GMD033R11A392KA01#

4700pF ±10% GMD033R11A472KA01#

5600pF ±10% GMD033R11A562KA01#

6800pF ±10% GMD033R11A682KA01#

8200pF ±10% GMD033R11A822KA01#

10000pF ±10% GMD033R11A103KA01#

B 3900pF ±10% GMD033B11A392KA01#

4700pF ±10% GMD033B11A472KA01#

5600pF ±10% GMD033B11A562KA01#

6800pF ±10% GMD033B11A682KA01#

8200pF ±10% GMD033B11A822KA01#

10000pF ±10% GMD033B11A103KA01#

6.3Vdc X5R 56000pF ±10% GMD033R60J563KE11#

68000pF ±10% GMD033R60J683KE11#

82000pF ±10% GMD033R60J823KE11#

0.1µF ±10% GMD033R60J104KE11#

B 56000pF ±10% GMD033B30J563KE11#

68000pF ±10% GMD033B30J683KE11#

82000pF ±10% GMD033B30J823KE11#

0.1µF ±10% GMD033B30J104KE11#

c 1.0×0.5mm

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc X7R 220pF ±10% GMD155R71H221KA01#

270pF ±10% GMD155R71H271KA01#

330pF ±10% GMD155R71H331KA01#

390pF ±10% GMD155R71H391KA01#

470pF ±10% GMD155R71H471KA01#

560pF ±10% GMD155R71H561KA01#

680pF ±10% GMD155R71H681KA01#

820pF ±10% GMD155R71H821KA01#

1000pF ±10% GMD155R71H102KA01#

1200pF ±10% GMD155R71H122KA01#

1500pF ±10% GMD155R71H152KA01#

1800pF ±10% GMD155R71H182KA01#

2200pF ±10% GMD155R71H222KA01#

2700pF ±10% GMD155R71H272KA01#

3300pF ±10% GMD155R71H332KA01#

3900pF ±10% GMD155R71H392KA01#

4700pF ±10% GMD155R71H472KA01#

R 220pF ±10% GMD155R11H221KA01#

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

116

Part number # indicates the package speciﬁ cation code.

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 50Vdc R 270pF ±10% GMD155R11H271KA01#

330pF ±10% GMD155R11H331KA01#

390pF ±10% GMD155R11H391KA01#

470pF ±10% GMD155R11H471KA01#

560pF ±10% GMD155R11H561KA01#

680pF ±10% GMD155R11H681KA01#

820pF ±10% GMD155R11H821KA01#

1000pF ±10% GMD155R11H102KA01#

1200pF ±10% GMD155R11H122KA01#

1500pF ±10% GMD155R11H152KA01#

1800pF ±10% GMD155R11H182KA01#

2200pF ±10% GMD155R11H222KA01#

2700pF ±10% GMD155R11H272KA01#

3300pF ±10% GMD155R11H332KA01#

3900pF ±10% GMD155R11H392KA01#

4700pF ±10% GMD155R11H472KA01#

B 220pF ±10% GMD155B11H221KA01#

270pF ±10% GMD155B11H271KA01#

330pF ±10% GMD155B11H331KA01#

390pF ±10% GMD155B11H391KA01#

470pF ±10% GMD155B11H471KA01#

560pF ±10% GMD155B11H561KA01#

680pF ±10% GMD155B11H681KA01#

820pF ±10% GMD155B11H821KA01#

1000pF ±10% GMD155B11H102KA01#

1200pF ±10% GMD155B11H122KA01#

1500pF ±10% GMD155B11H152KA01#

1800pF ±10% GMD155B11H182KA01#

2200pF ±10% GMD155B11H222KA01#

2700pF ±10% GMD155B11H272KA01#

3300pF ±10% GMD155B11H332KA01#

3900pF ±10% GMD155B11H392KA01#

4700pF ±10% GMD155B11H472KA01#

25Vdc X7R 5600pF ±10% GMD155R71E562KA01#

6800pF ±10% GMD155R71E682KA01#

8200pF ±10% GMD155R71E822KA01#

10000pF ±10% GMD155R71E103KA01#

12000pF ±10% GMD155R71E123KA01#

15000pF ±10% GMD155R71E153KA01#

18000pF ±10% GMD155R71E183KA01#

22000pF ±10% GMD155R71E223KA01#

27000pF ±10% GMD155R71E273KA11#

33000pF ±10% GMD155R71E333KA11#

39000pF ±10% GMD155R71E393KA11#

47000pF ±10% GMD155R71E473KA11#

R 5600pF ±10% GMD155R11E562KA01#

6800pF ±10% GMD155R11E682KA01#

8200pF ±10% GMD155R11E822KA01#

10000pF ±10% GMD155R11E103KA01#

12000pF ±10% GMD155R11E123KA01#

15000pF ±10% GMD155R11E153KA01#

18000pF ±10% GMD155R11E183KA01#

22000pF ±10% GMD155R11E223KA01#

27000pF ±10% GMD155R11E273KA11#

GMD Series High Dielectric Constant Type Part Number List

max.

Rated

Voltage

Code Cap. Tol. Part Number

0.55mm 25Vdc R 33000pF ±10% GMD155R11E333KA11#

39000pF ±10% GMD155R11E393KA11#

47000pF ±10% GMD155R11E473KA11#

B 5600pF ±10% GMD155B11E562KA01#

6800pF ±10% GMD155B11E682KA01#

8200pF ±10% GMD155B11E822KA01#

10000pF ±10% GMD155B11E103KA01#

12000pF ±10% GMD155B11E123KA01#

15000pF ±10% GMD155B11E153KA01#

18000pF ±10% GMD155B11E183KA01#

22000pF ±10% GMD155B11E223KA01#

27000pF ±10% GMD155B31E273KA11#

33000pF ±10% GMD155B31E333KA11#

39000pF ±10% GMD155B31E393KA11#

47000pF ±10% GMD155B31E473KA11#

16Vdc X7R 56000pF ±10% GMD155R71C563KA11#

68000pF ±10% GMD155R71C683KA11#

82000pF ±10% GMD155R71C823KA11#

0.1µF ±10% GMD155R71C104KA11#

R 56000pF ±10% GMD155R11C563KA11#

68000pF ±10% GMD155R11C683KA11#

82000pF ±10% GMD155R11C823KA11#

0.1µF ±10% GMD155R11C104KA11#

B 56000pF ±10% GMD155B31C563KA11#

68000pF ±10% GMD155B31C683KA11#

82000pF ±10% GMD155B31C823KA11#

0.1µF ±10% GMD155B31C104KA11#

10Vdc X5R 0.12µF ±10% GMD155R61A124KE12#

0.15µF ±10% GMD155R61A154KE12#

0.18µF ±10% GMD155R61A184KE12#

0.22µF ±10% GMD155R61A224KE12#

0.27µF ±10% GMD155R61A274KE11#

0.33µF ±10% GMD155R61A334KE11#

0.39µF ±10% GMD155R61A394KE11#

0.47µF ±10% GMD155R61A474KE11#

B 0.12µF ±10% GMD155B31A124KE12#

0.15µF ±10% GMD155B31A154KE12#

0.18µF ±10% GMD155B31A184KE12#

0.22µF ±10% GMD155B31A224KE12#

0.27µF ±10% GMD155B31A274KE11#

0.33µF ±10% GMD155B31A334KE11#

0.39µF ±10% GMD155B31A394KE11#

0.47µF ±10% GMD155B31A474KE11#

(→ c 1.0×0.5mm)

C02E.pdf

Oct.1,2012

117

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

118

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution/Notice

For General !Caution/Notice

!Caution Notice

c Storage and Operation Conditions ........................ 119

c Rating .................................................................... 119

1. Temperature Dependent Characteristics........... 119

2. Measurement of Capacitance............................ 120

3. Applied Voltage ................................................. 120

4. Applied Voltage and

Self-heating Temperature.................................. 120

5. DC Voltage and AC Voltage Characteristic....... 121

6. Capacitance Aging ............................................ 121

7. Vibration and Shock .......................................... 122

c Soldering and Mounting ........................................ 122

1. Mounting Position.............................................. 122

2. Information before Mounting.............................. 123

3. Maintenance of the Mounting (pick and place)

Machine............................................................. 123

4-1. Reflow Soldering ............................................ 124

4-2. Flow Soldering................................................ 125

4-3. Correction with a Soldering Iron..................... 126

4-4. Leaded Component Insertion......................... 126

5. Washing............................................................. 126

6. Electrical Test on Printed Circuit Board............. 127

7. Printed Circuit Board Cropping.......................... 127

c Others.................................................................... 128

1. Under Operation of Equipment.......................... 128

2. Others................................................................ 128

c Rating .................................................................... 129

1. Operating Temperature ..................................... 129

2. Atmosphere Surroundings................................. 129

3. Piezo-electric Phenomenon............................... 129

c Soldering and Mounting ........................................ 129

1. PCB Design....................................................... 129

1. Notice for Pattern Forms ............................... 129

2. Land Dimensions........................................... 130

2. Adhesive Application ......................................... 131

3. Adhesive Curing ................................................ 132

4. Flux Application ................................................. 132

5. Flow Soldering................................................... 132

6. Washing............................................................. 132

7. Coating .............................................................. 133

8. Die Bonding/Wire Bonding

(GMA or GMD Series) ....................................... 133

c Others.................................................................... 133

1. Transportation ................................................... 133

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

119

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

1. The performance of chip monolithic ceramic capacitors

may be affected by the storage conditions.

1-1. Store capacitors in the following conditions:

Temperature of +5°C to +40°C and a Relative

Humidity of 20% to 70%.

(1) Sunlight, dust, rapid temperature changes,

corrosive gas atmosphere or high temperature

and humidity conditions during storage may affect

solderability and packaging performance.

Please use product within six months of receipt.

(2) Please confirm solderability before using after six

months. Store the capacitors without opening the

original bag. Even if the storage period is short, do

not exceed the specified atmospheric conditions.

1-2. Corrosive gas can react with the termination

(external) electrodes or lead wires of capacitors, and

result in poor solderability. Do not store the

capacitors in an atmosphere consisting of corrosive

gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine,

ammonia gas, etc.).

1-3. Due to moisture condensation caused by rapid

humidity changes, or the photochemical change

caused by direct sunlight on the terminal electrodes

and/or the resin/epoxy coatings, the solderability and

electrical performance may deteriorate. Do not store

capacitors under direct sunlight or in high humidity

conditions.

c Storage and Operation Conditions

Continued on the following page.

c Rating

1. Temperature Dependent Characteristics

1. The electrical characteristics of the capacitor can change

with temperature.

1-1. For capacitors having larger temperature

dependency, the capacitance may change with

temperature changes.

The following actions are recommended in order to

ensure suitable capacitance values.

(1) Select a suitable capacitance for the operating

temperature range.

(2) The capacitance may change within the rated

temperature.

When you use a high dielectric constant type

capacitor in a circuit that needs a tight (narrow)

capacitance tolerance (e.g., a time-constant

circuit), please carefully consider the

characteristics of these capacitors, such as their

aging, voltage, and temperature characteristics.

In addition, check capacitors using your actual

appliances at the intended environment and

operating conditions.

-20

-15

-10

-5

-75 -50 -25 0 25 50 75 100

Capacitance Change (%)

Temperature (°C)

Typical Temperature Characteristics R6(X5R)

Capacitance Change (%)

Temperature (°C)

Typical Temperature Characteristics F5(Y5V)

Typical Temperature Characteristics R7(X7R)

-20

-15

-10

-5

-75 -50 -25 0 25 50 75 100 125 150

Capacitance Change (%)

Temperature (°C)

-100

-80

-60

-40

-20

-50 -25 0 25 50 75 100

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

120

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

2. Measurement of Capacitance

1. Measure capacitance with the voltage and the frequency

specified in the product specifications.

1-1. The output voltage of the measuring equipment may

decrease occasionally when capacitance is high.

Please confirm whether a prescribed measured

voltage is impressed to the capacitor.

1-2. The capacitance values of high dielectric constant

type capacitors change depending on the AC voltage

applied. Please consider the AC voltage

characteristics when selecting a capacitor to be used

in an AC circuit.

Continued on the following page.

Continued from the preceding page.

3. Applied Voltage

4. Applied Voltage and Self-heating Temperature

1. Do not apply a voltage to the capacitor that exceeds the

rated voltage as called out in the specifications.

1-1. Applied voltage between the terminals of a capacitor

shall be less than or equal to the rated voltage.

(1) When AC voltage is superimposed on DC voltage,

the zero-to-peak voltage shall not exceed the

rated DC voltage.

When AC voltage or pulse voltage is applied, the

peak-to-peak voltage shall not exceed the rated

DC voltage.

(2) Abnormal voltages (surge voltage, static

electricity, pulse voltage, etc.) shall not exceed

the rated DC voltage.

1. When the capacitor is used in a high-frequency voltage,

pulse voltage, application, be sure to take into account

self-heating may be caused by resistant factors of the

capacitor.

1-1. The load should be contained to the level such that

when measuring at atmospheric temperature of 25°C,

the product's self-heating remains below 20°C and

surface temperature of the capacitor in the actual

circuit remains within the maximum operating

temperature.

1-2. Influence of overvoltage

Overvoltage that is applied to the capacitor may

result in an electrical short circuit caused by the

breakdown of the internal dielectric layers.

The time duration until breakdown depends on the

applied voltage and the ambient temperature.

Typical Voltage Applied to the DC Capacitor

(E: Maximum possible applied voltage.)

DC Voltage DC Voltage+AC AC Voltage Pulse Voltage

E0E

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

121

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

5. DC Voltage and AC Voltage Characteristics

1. The capacitance value of a high dielectric constant type

capacitor changes depending on the DC voltage applied.

Please consider the DC voltage characteristics when a

capacitor is selected for use in a DC circuit.

1-1. The capacitance of ceramic capacitors may change

sharply depending on the applied voltage (see

figure).

Please confirm the following in order to secure the

capacitance.

(1) Determine whether the capacitance change

caused by the applied voltage is within the

allowed range.

(2) In the DC voltage characteristics, the rate of

capacitance change becomes larger as voltage

increases, even if the applied voltage is below

the rated voltage. When a high dielectric constant

type capacitor is in a circuit that needs a tight

(narrow) capacitance tolerance (e.g., a time-

constant circuit), please carefully consider the

characteristics of these capacitors, such as their

aging, voltage, and temperature characteristics.

In addition, check capacitors using your actual

appliances at the intended environment and

operating conditions.

2. The capacitance values of high dielectric constant type

capacitors change depending on the AC voltage applied.

Please consider the AC voltage characteristics when

selecting a capacitor to be used in an AC circuit.

Continued on the following page.

Continued from the preceding page.

-60

-50

-40

-30

-20

-10

0.0 0.5 1.0 1.5 2.0 2.5

AC Voltage (Vr.m.s.)

6. Capacitance Aging

1. The high dielectric constant type capacitors have the

characteristic in which the capacitance value decreases

with the passage of time.

When you use a high dielectric constant type capacitors

in a circuit that needs a tight (narrow) capacitance

tolerance (e.g., a time-constant circuit), please carefully

consider the characteristics of these capacitors, such as

their aging, voltage, and temperature characteristics. In

addition, check capacitors using your actual appliances at

the intended environment and operating conditions.

-100

-80

-60

-40

-20

01234567

DC Voltage (VDC)

[DC Voltage Characteristics]

[AC Voltage Characteristics]

Capacitance Change (%)Capacitance Change (%)

-40

-30

-20

-10

10 100 1000 10000

RΔ

Time (Hr)

Capacitor Change (%)

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

122

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

7. Vibration and Shock

1. Please confirm the kind of vibration and/or shock, its

condition, and any generation of resonance.

Please mount the capacitor so as not to generate

resonance, and do not allow any impact on the terminals.

2. Mechanical shock due to being dropped may cause

damage or a crack in the dielectric material of the

capacitor.

Do not use a dropped capacitor because the quality and

reliability may be deteriorated.

3. When printed circuit boards are piled up or handled, the

corner of another printed circuit board should not be

allowed to hit the capacitor, in order to avoid a crack or

other damage to the capacitor.

Continued from the preceding page.

Floor

Crack

Mounting printed circuit board

Continued on the following page.

c Soldering and Mounting

1. Confirm the best mounting position and direction that

minimizes the stress imposed on the capacitor during

flexing or bending the printed circuit board.

1-1. Choose a mounting position that minimizes the

stress imposed on the chip during flexing or bending

of the board.

1. Mounting Position

Locate chip

horizontal to the

direction in

which stress

acts.

Chip arrangement

Worst A-C-(B~D) Best

[Component Direction]

[Chip Mounting Close to Board Separation Point]

Perforation

Slit

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

123

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

Continued on the following page.

Continued from the preceding page.

2. Information before Mounting

1. Do not reuse capacitors that were removed from the

equipment.

2. Confirm capacitance characteristics under actual applied

voltage.

3. Confirm the mechanical stress under actual process and

equipment use.

4. Confirm the rated capacitance, rated voltage and other

electrical characteristics before assembly.

5. Prior to use, confirm the solderability of capacitors that

were in long-term storage.

6. Prior to measuring capacitance, carry out a heat

treatment for capacitors that were in long-term storage.

7. The use of Sn-Zn based solder will deteriorate the

reliability of the MLCC.

Please contact our sales representative or product

engineers on the use of Sn-Zn based solder in advance.

3. Maintenance of the Mounting (pick and place) Machine

1. Make sure that the following excessive forces are not

applied to the capacitors.

1-1. In mounting the capacitors on the printed circuit

board, any bending force against them shall be kept

to a minimum to prevent them from any bending

damage or cracking. Please take into account the

following precautions and recommendations for use

in your process.

(1) Adjust the lowest position of the pickup nozzle so

as not to bend the printed circuit board.

(2) Adjust the nozzle pressure within a static load of

1N to 3N during mounting.

2. Dirt particles and dust accumulated between the suction

nozzle and the cylinder inner wall prevent the nozzle from

moving smoothly. This imposes greater force upon the

chip during mounting, causing cracked chips. Also, the

locating claw, when worn out, imposes uneven forces on

the chip when positioning, causing cracked chips. The

suction nozzle and the locating claw must be maintained,

checked and replaced periodically.

Board Guide

[Correct]

Suction Nozzle

Board

Support Pin

[Incorrect]

Deflection

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

124

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

4-1. Reflow Soldering

1. When sudden heat is applied to the components, the

mechanical strength of the components will decrease

because a sudden temperature change causes

deformation inside the components. In order to prevent

mechanical damage to the components, preheating is

required for both the components and the PCB board.

Preheating conditions are shown in table 1. It is required to

keep the temperature differential between the solder and

the component's surface (ΔT) as small as possible.

2. Solderability of tin plating termination chips might be

deteriorated when a low temperature soldering profile

where the peak solder temperature is below the melting

point of tin is used. Please confirm the solderability of tin

plated termination chips before use.

3. When components are immersed in solvent after mounting,

be sure to maintain the temperature difference (ΔT)

between the component and the solvent within the range

shown in the table 1.

GRM02/03/15/18/21/31

GJM02/03/15

LLL15/18/21/31

LLR18

GQM18/21

GRM32/43/55

LLA18/21/31

LLM21/31

GNM

GQM22

ΔTV190°C

ΔTV130°C

Part Number Temperature Differential

Table 1

Recommended Conditions

[Standard Conditions for Reflow Soldering]

[Allowable Reflow Soldering Temperature and Time]

In the case of repeated soldering, the accumulated

soldering time must be within the range shown above.

Soldering Time (sec.)

260

270

280

250

240

230

2200 30 60 90 120

Soldering Temperature (D)

Inverting the PCB

Make sure not to impose any abnormal mechanical shocks

to the PCB.

Continued from the preceding page.

Continued on the following page.

Peak Temperature

Atmosphere

Pb-Sn Solder

Infrared Reflow

230 to 250°C

Air

Vapor Reflow

230 to 240°C

Air

Lead Free Solder

240 to 260°C

Air or N2

Infrared Reflow

Vapor Reflow

60-120 seconds 30-60 seconds

ΔT

Gradual

Cooling

Soldering

Preheating

200°C

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

60-120 seconds 20 seconds max.

ΔT

Gradual

Cooling

Soldering

Preheating

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

4. Optimum Solder Amount for Reflow Soldering

4-1. Overly thick application of solder paste results in a

excessive solder fillet height.

This makes the chip more susceptible to mechanical

and thermal stress on the board and may cause the

chips to crack.

4-2. Too little solder paste results in a lack of adhesive

strength on the outer electrode, which may result in

chips breaking loose from the PCB.

4-3. Make sure the solder has been applied smoothly to

the end surface to a height of 0.2mm* min.

0.2mm∗ min.

∗ GRM02/03: 1/3 of Chip Thickness min. in section

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

125

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

5. Optimum Solder Amount for Flow Soldering

5-1. The top of the solder fillet should be lower than the

thickness of components. If the solder amount is

excessive, the risk of cracking is higher during board

bending or any other stressful condition.

GRM18/21/31

LLL21/31

GQM18/21

ΔTV150°C

Part Number Temperature Differential

Table 2

[Standard Conditions for Flow Soldering]

[Allowable Flow Soldering Temperature and Time]

In the case of repeated soldering, the accumulated

soldering time must be within the range shown above.

Soldering Time (sec.)

260

270

280

250

240

230

220010203040

Soldering Temperature (D)

Up to Chip Thickness

Adhesive

Continued from the preceding page.

Continued on the following page.

Recommended Conditions

Soldering Peak Temperature

Atmosphere

Pb-Sn Solder

240 to 250°C

Air

Lead Free Solder

250 to 260°C

Preheating Peak Temperature 90 to 110°C 100 to 120°C

30-90 seconds 5 seconds max.

ΔT

Gradual

Cooling

Soldering

Preheating

Peak

Temperature

Time

Temperature (D)

Soldering

Peak

Temperature

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

4-2. Flow Soldering

1. When sudden heat is applied to the components, the

mechanical strength of the components will decrease

because a sudden temperature change causes

deformation inside the components. In order to prevent

mechanical damage in the components, preheating

should be required for both of the components and the

PCB board.

Preheating conditions are shown in table 2. It is required

to keep the temperature differential between the solder

and the component's surface (ΔT) as small as possible.

2. Excessively long soldering time or high soldering

temperature can result in leaching of the outer electrodes,

causing poor adhesion or a reduction in capacitance

value due to loss of contact between electrodes and end

termination.

3. When components are immersed in solvent after

mounting, be sure to maintain the temperature difference

(ΔT) between the component and solvent within the range

shown in the table 2.

4. Do not apply flow soldering to chips not listed in table 2.

in section

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

126

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

Solder Amount

in section

4-3. Correction with a Soldering Iron

1. When sudden heat is applied to the components when

using a soldering iron, the mechanical strength of the

components will decrease because the extreme

temperature change can cause deformations inside the

components. In order to prevent mechanical damage to

the components, preheating is required for both the

components and the PCB board. Preheating conditions

(The "Temperature of the Soldering Iron Tip", "Preheating

Temperature," "Temperature Differential" between the

iron tip and the components and the PCB), should be

within the conditions of table 3. It is required to keep the

temperature differential between the soldering iron and

the component surfaces (ΔT) as small as possible.

2. After soldering, do not allow the component/PCB to cool

down rapidly.

3. The operating time for the re-working should be as short

as possible. When re-working time is too long, it may

cause solder leaching, in turn causing a reduction in the

adhesive strength of the terminations.

4. Optimum solder amount when re-working with a soldering

iron

4-1. For sizes smaller than 0603, (GRM03/15/18,

GJM03/15, GQM18), the top of the solder fillet

should be lower than 2/3 of the thickness of the

component or 0.5mm whichever is smaller. For 0805

and larger sizes, (GRM21/31/32/43/55, GQM21/22),

the top of the solder fillet should be lower than 2/3 of

the thickness of the component. If the solder amount

is excessive, the risk of cracking is higher during

board bending or under any other stressful condition.

4-2. A soldering iron with a tip of ø3mm or smaller should

be used. It is also necessary to keep the soldering

iron from touching the components during the

re-work.

4-3. Solder wire with ø0.5mm or smaller is required for

soldering.

GRM03/15/18/21/31

GJM03/15

GQM18/21

GRM32/43/55

GQM22

ΔTV190°C

ΔTV130°C

Part Number

Temperature

Differential

(ΔT)

Table 3

Continued from the preceding page.

4-4. Leaded Component Insertion

1. If the PCB is flexed when leaded components (such as

transformers and ICs) are being mounted, chips may

crack and solder joints may break.

Before mounting leaded components, support the PCB

using backup pins or special jigs to prevent warping.

5. Washing

Excessive ultrasonic oscillation during cleaning can cause

the PCBs to resonate, resulting in cracked chips or broken

solder joints. Take note not to vibrate PCBs.

Air

Atmosphere

350°C max.

280°C max.

Temperature

of Soldering

Iron Tip

150°C min.

Preheating

Temperature

*Applicable for both Pb-Sn and Lead Free Solder.

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

Continued on the following page.

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

127

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

6. Electrical Test on Printed Circuit Board

1. Confirm position of the support pin or specific jig, when

inspecting the electrical performance of a capacitor after

mounting on the printed circuit board.

1-1. Avoid bending the printed circuit board by the

pressure of a test pin, etc.

The thrusting force of the test probe can flex the PCB,

resulting in cracked chips or open solder joints.

Provide support pins on the back side of the PCB to

prevent warping or flexing.

1-2. Avoid vibration of the board by shock when a test pin

contacts a printed circuit board.

7. Printed Circuit Board Cropping

1. After mounting a capacitor on a printed circuit board, do

not apply any stress to the capacitor that is caused by

bending or twisting the board.

1-1. In cropping the board, the stress as shown at right

may cause the capacitor to crack.

Try not to apply this type of stress to a capacitor.

2. Ascertain of the cropping method for the printed circuit

board in advance.

2-1. Printed circuit board cropping shall be carried out by

using a jig or an apparatus to prevent the mechanical

stress that can occur to the board.

(1) Example of a suitable jig

Recommended example: the board should be

pushed as close to the cropping jig as possible

and from the back side of board in order to

minimize the compressive stress applied to the

capacitor.

Not recommended example: when the board is

pushed at a point far from the cropping jig and

from the front side of board as below, the

capacitor may form a crack caused by the tensile

stress applied to capacitor.

Continued from the preceding page.

Continued on the following page.

[Not Recommended]

[Recommended]

Peeling

Test-pin

Support Pin

Test-pin

[Bending]

[Twisting]

[Outline of Jig]

Load Point

Board Cropping Jig

V-groove

Printed Circuit Board

Components

Printed Circuit Board

Direction of Load Direction of Load

Printed Circuit Board

Not recommendedRecommended

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

128

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

!Caution

(2) Example of a suitable machine

An outline of a printed circuit board cropping

machine is shown as follows. Along the lines with

the V-grooves on the printed circuit board, the top

and bottom blades are aligned to one another

when cropping the board.

The misalignment of the position between top and

bottom blades may cause the capacitor to crack.

Continued from the preceding page.

V-groove

Printed Circuit Board

[Outline of Machine]

[Principle of Operation]

[Cross-section Diagram]

Top Blade

Bottom Blade

Top Blade

Bottom Blade

Top Blade

Bottom Blade

Top Blade

Bottom Blade

Top Blade

Printed Circuit Board

V-groove

Recommended Not Recommended

Top-bottom Misalignment Left-right Misalignment Front-rear Misalignment

1. Under Operation of Equipment

1-1. Do not touch a capacitor directly with bare hands

during operation in order to avoid the danger of an

electric shock.

1-2. Do not allow the terminals of a capacitor to come in

contact with any conductive objects (short-circuit).

Do not expose a capacitor to a conductive liquid,

including any acid or alkali solutions.

1-3. Confirm the environment in which the equipment will

operate is under the specified conditions.

Do not use the equipment under the following

environments.

(1) Being spattered with water or oil.

(2) Being exposed to direct sunlight.

(3) Being exposed to Ozone, ultraviolet rays or

radiation.

(4) Being exposed to toxic gas (e.g., hydrogen sulfide,

sulfur dioxide, chlorine, ammonia gas, etc.)

(5) Any vibrations or mechanical shocks exceeding the

specified limits.

(6) Moisture condensing environments.

1-4. Use damp proof countermeasures if using under any

conditions that can cause condensation.

2. Others

2-1. In an Emergency

(1) If the equipment should generate smoke, fire or

smell, immediately turn off or unplug the equipment.

If the equipment is not turned off or unplugged,

the hazards may be worsened by supplying

continuous power.

(2) In this type of situation, do not allow face and

hands to come in contact with the capacitor or

burns may be caused by the capacitor's high

temperature.

2-2. Disposal of Waste

When capacitors are disposed, they must be burned

or buried by an industrial waste vendor with the

appropriate licenses.

2-3. Circuit Design

GRM, GCM, GMA/D, LLL/A/M, GQM, GJM, GNM

Series capacitors in this catalog are not safety

certified products.

2-4. Remarks

Failure to follow the cautions may result, worst case,

in a short circuit and smoking when the product is

used.

The above notices are for standard applications and

conditions. Contact us when the products are used in

special mounting conditions.

Select optimum conditions for operation as they

determine the reliability of the product after assembly.

The data herein are given in typical values, not

guaranteed ratings.

c Others

!Caution

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

129

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

Notice

1. Operating Temperature

1. The operating temperature limit depends on the capacitor.

1-1. Do not apply temperatures exceeding the upper

operating temperature.

It is necessary to select a capacitor with a suitable

rated temperature that will cover the operating

temperature range.

It is also necessary to consider the temperature

distribution in equipment and the seasonal

temperature variable factor.

1-2. Consider the self-heating factor of the capacitor.

The surface temperature of the capacitor shall be

the upper operating temperature or less when

including the self-heating factors.

2. Atmosphere Surroundings (gaseous and liquid)

1. Restriction on the operating environment of capacitors.

1-1. Capacitors, when used in the above, unsuitable,

operating environments may deteriorate due to

the corrosion of the terminations and the

penetration of moisture into the capacitor.

1-2. The same phenomenon as the above may occur

when the electrodes or terminals of the capacitor

are subject to moisture condensation.

1-3. The deterioration of characteristics and insulation

resistance due to the oxidization or corrosion of

terminal electrodes may result in breakdown when

the capacitor is exposed to corrosive or volatile

gases or solvents for long periods of time.

3. Piezo-electric Phenomenon

1. When using high dielectric constant type capacitors in

AC or pulse circuits, the capacitor itself vibrates at

specific frequencies and noise may be generated.

Moreover, when the mechanical vibration or shock is

added to the capacitor, noise may occur.

c Rating

Continued on the following page.

c Soldering and Mounting

1. PCB Design

1. Notice for Pattern Forms

1-1. Unlike leaded components, chip components are

susceptible to flexing stresses since they are

mounted directly on the substrate.

They are also more sensitive to mechanical and

thermal stresses than leaded components.

Excess solder fillet height can multiply these stresses

and cause chip cracking. When designing substrates,

take land patterns and dimensions into consideration

to eliminate the possibility of excess solder fillet

height.

1-2. There is a possibility of chip crack caused by PCB

expansion/contraction with heat. Because stress for

chip is different depend on PCB material and

structure. Especially metal PCB such as alumina has

a greater risk of chip crack because of large

difference of thermal expansion coefficient. In case of

chip below 0402 size, there is also the same

possibility of crack with a single-layered glass epoxy

board.

Chassis

Solder (ground)

Electrode Pattern

Solder Resist

Lead Wire

Soldering Iron

Lead Wire

Solder Resist

Pattern Forms

Placing Close to Chassis

Placing

of Chip Components

and Leaded Components

Placing

of Leaded Components

after Chip Component

Lateral Mounting

Prohibited Correct

Notice

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

130

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

Notice

GRM18

GQM18

GRM21

GQM21

GRM31

LLL21

LLL31

1.6g0.8

2.0g1.25

3.2g1.6

1.25g2.0

1.6g3.2

0.6 to 1.0

1.0 to 1.2

2.2 to 2.6

0.4 to 0.7

0.6 to 1.0

0.8 to 0.9

0.9 to 1.0

1.0 to 1.1

0.5 to 0.7

0.8 to 0.9

0.6 to 0.8

0.8 to 1.1

1.0 to 1.4

1.4 to 1.8

2.6 to 2.8

(in mm)

Part Number

Dimensions Chip (LgW) a b c

Table 1 Flow Soldering Method

GRM02

GJM02

GRM03

GJM03

GRM15

GJM15

GRM18

GQM18

GQM21

GRM21

GRM31

GRM32

GRM43

GRM55

LLL15

LLL18

LLR18

LLL21

LLL31

GQM22

0.4g0.2

0.6g0.3

1.0g0.5 (within ±0.10)

1.0g0.5 (±0.15/±0.20)

1.6g0.8 (within ±0.10)

1.6g0.8 (±0.15/±0.20)

2.0g1.25

2.0g1.25 (within ±1.0)

2.0g1.25 (±0.15)

2.0g1.25 (±0.20)

3.2g1.6 (within ±0.20)

3.2g1.6 (±0.30)

3.2g2.5

4.5g3.2

5.7g5.0

0.5g1.0

0.8g1.6

1.25g2.0

1.6g3.2

2.8g2.8

0.16 to 0.2

0.2 to 0.3

0.3 to 0.5

0.4 to 0.6

0.6 to 0.8

0.7 to 0.9

1.0 to 1.2

1.2

1.0 to 1.4

1.8 to 2.0

1.9 to 2.1

2.0 to 2.4

3.0 to 3.5

4.0 to 4.6

0.15 to 0.2

0.2 to 0.3

0.4 to 0.6

0.6 to 0.8

2.2 to 2.5

0.12 to 0.18

0.2 to 0.35

0.35 to 0.45

0.40 to 0.50

0.6 to 0.7

0.7 to 0.8

0.6 to 0.7

0.6

0.6 to 0.8

0.9 to 1.2

1.0 to 1.3

1.0 to 1.2

1.2 to 1.4

1.4 to 1.6

0.2 to 0.25

0.3 to 0.4

0.4 to 0.5

0.6 to 0.7

0.8 to 1.0

0.2 to 0.23

0.2 to 0.4

0.4 to 0.6

0.5 to 0.7

0.6 to 0.8

0.8 to 1.0

0.8 to 1.1

1.25

1.2 to 1.4

1.5 to 1.7

1.7 to 1.9

1.8 to 2.3

2.3 to 3.0

3.5 to 4.8

0.7 to 1.0

1.4 to 1.6

1.4 to 1.8

2.6 to 2.8

1.9 to 2.3

(in mm)

Part Number

Dimensions Chip (LgW) a b c

Table 2 Reflow Soldering Method

Chip Capacitor

Continued from the preceding page.

Continued on the following page.

2. Land Dimensions

2-1. A chip capacitor can be cracked due to the stress of

PCB bending, etc. if the land area is larger than

needed and has an excess amount of solder.

Please refer to the land dimensions in table 1 for flow

soldering, table 2 for reflow soldering, table 3 for

GNM & LLA, and table 4 for LLM.

Please confirm the suitable land dimension by

evaluating the actual SET / PCB.

Solder Resist

Land

Notice

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

131

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

Notice

GNM0M2

GNM1M2

GNM212

GNM214

GNM314

LLA18

LLA21

LLA31

0.9

1.37

2.0

3.2

1.6

2.0

3.2

0.6

1.0

1.25

1.6

0.8

1.25

1.6

0.12 to 0.20*

0.4 to 0.5

0.6 to 0.7

0.8 to 1.0

0.3 to 0.4

0.5 to 0.7

0.7 to 0.9

0.35 to 0.40*

0.35 to 0.45

0.5 to 0.7

0.7 to 0.9

0.25 to 0.35

0.35 to 0.6

0.4 to 0.7

0.3

0.3 to 0.35

0.4 to 0.5

0.25 to 0.35

0.3 to 0.4

0.15 to 0.25

0.2 to 0.3

0.3 to 0.4

0.45

0.64

1.0

0.5

0.8

0.4

0.5

0.8

Part Number

LWa b c p

Dimensions (mm)

Table 3 GNM, LLA Series for Reflow Soldering Land Dimensions

Land

Chip Capacitor

Continued from the preceding page.

2. Adhesive Application

1. Thin or insufficient adhesive can cause the chips to

loosen or become disconnected during flow soldering.

The amount of adhesive must be more than dimension c,

shown in the drawing at right, to obtain the correct

bonding strength.

The chip's electrode thickness and land thickness must

also be taken into consideration.

2. Low viscosity adhesive can cause chips to slip after

mounting. The adhesive must have a viscosity of

5000Pa s s (500ps) min. (at 25°C).

3. Adhesive Coverage

Land

Adhesive

Board

Chip Capacitor

c=50 to 105μm

b=30 to 35μm

a=20 to 70μm

Continued on the following page.

GRM18, GQM18

GRM21, LLL21, GQM21

GRM31, LLL31

0.05mg min.

0.1mg min.

0.15mg min.

Part Number Adhesive Coverage*

*Nominal Value

Chip Capacitor

pLand

GNMpp2GNMpp4

LLA

LLM21

LLM31

0.3

0.4

Part Number

c, c'

(0.3 to 0.5)

b, b'

1.3 to 1.8

1.6 to 2.0

2.0 to 2.6

3.2 to 3.6

0.6 to 0.8

1.0

1.4 to 1.6

2.6

0.5

0.8

Dimensions (mm)

Table 4 LLM Series for Reflow Soldering Land Dimensions

LLM

b=(c-e)/2, b'=(d-f)/2

p c

* 0.82Va+2bV1.00

Notice

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

132

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

Notice

1. Please evaluate a capacitor using actual cleaning

equipment and conditions to confirm the quality and

select the applicable solvent.

2. Unsuitable cleaning solvent may leave residual flux or

other foreign substances, causing deterioration of

electrical characteristics and the reliability of the

capacitors.

3. Select the proper cleaning conditions.

3-1. Improper cleaning conditions (excessive or

insufficient) may result in the deterioration of the

performance of the capacitors.

6. Washing

Continued from the preceding page.

4. Flux Application

1. An excessive amount of flux generates a large quantity of

flux gas, which can cause a deterioration of solderability,

so apply flux thinly and evenly throughout. (A foaming

system is generally used for flow soldering.)

2. Flux containing too high a percentage of halide may

cause corrosion of the outer electrodes unless there is

sufficient cleaning. Use flux with a halide content of 0.2%

max.

3. Do not use strong acidic flux.

4. Do not use water-soluble *flux.

(*Water-soluble flux can be defined as non-rosin type flux

including wash-type flux and non-wash-type flux.)

3. Adhesive Curing

1. Insufficient curing of the adhesive can cause chips to

disconnect during flow soldering and deterioration in the

insulation resistance between the outer electrodes due to

moisture absorption.

Control curing temperature and time in order to prevent

insufficient hardening.

Continued on the following page.

o Set temperature and time to ensure that leaching of the

outer electrode does not exceed 25% of the chip end

area as a single chip (full length of the edge A-B-C-D

shown at right) and 25% of the length A-B shown as

mounted on substrate.

[As a Single Chip]

[As Mounted on Substrate]

5. Flow Soldering

Outer Electrode

Notice

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

133

For General Purpose

GRM Series

Capacitor Array

GNM Series

Low ESL

LLp Series

High-Q Type

GJM Series

High Frequency

GQM Series

Monolithic Microchip

GMA Series

For Bonding

GMD Series

Product Information

Notice

1. A crack may be caused in the capacitor due to the stress

of the thermal contraction of the resin during curing

process.

The stress is affected by the amount of resin and curing

contraction.

Select a resin with low curing contraction.

The difference in the thermal expansion coefficient

between a coating resin or a molding resin and the

capacitor may cause the destruction and deterioration of

the capacitor such as a crack or peeling, and lead to the

deterioration of insulation resistance or dielectric

breakdown.

Select a resin for which the thermal expansion coefficient

is as close to that of the capacitor as possible.

A silicone resin can be used as an under-coating to buffer

against the stress.

2. Select a resin that is less hygroscopic.

Using hygroscopic resins under high humidity conditions

may cause the deterioration of the insulation resistance of

a capacitor.

An epoxy resin can be used as a less hygroscopic resin.

7. Coating

1. Die Bonding of Capacitors

s5SETHEFOLLOWINGMATERIALSFORTHE"RAZINGALLOYS

Au-Sn (80/20) 300 to 320 °C in N2 atmosphere

s-OUNTING

(1) Control the temperature of the substrate so it

MATCHESTHETEMPERATUREOFTHEBRAZINGALLOY

0LACETHEBRAZINGALLOYONTHESUBSTRATEANDPLACE

the capacitor on the alloy. Hold the capacitor and

gently apply the load. Be sure to complete the

operation within 1 minute.

2. Wire Bonding

s7IRE

'OLDWIREMICROMINCHDIAMETER

s"ONDING

(1) Thermo compression, ultrasonic ball bonding.

2EQUIREDSTAGETEMPERATURETO#

2EQUIREDWEDGEORCAPILLARYWEIGHT.TO.

(4) Bond the capacitor and base substrate or other

devices with gold wire.

8. Die Bonding/Wire Bonding (GMA or GMD Series)

Continued from the preceding page.

1. Transportation

1. The performance of a capacitor may be affected by the

conditions during transportation.

1-1. The capacitors shall be protected against

excessive temperature, humidity and mechanical

force during transportation.

(1) Climatic condition

sLOWAIRTEMPERATURE#

sCHANGEOFTEMPERATUREAIRAIR##

sLOWAIRPRESSUREK0A

sCHANGEOFAIRPRESSUREK0AMIN

-ECHANICALCONDITION

Transportation shall be done in such a way that

the boxes are not deformed and forces are not

directly passed on to the inner packaging.

1-2. Do not apply excessive vibration, shock, and

pressure to the capacitor.

(1) When excessive mechanical shock or pressure

is applied to a capacitor, chipping or cracking

may occur in the ceramic body of the capacitor.

(2) When the sharp edge of an air driver, a

SOLDERINGIRONTWEEZERSACHASSISETC

impacts strongly on the surface of the capacitor,

the capacitor may crack and short-circuit.

1-3. Do not use a capacitor to which excessive shock

was applied by dropping, etc.

A capacitor dropped accidentally during

processing may be damaged.

c Others

Notice

MEMO

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

134

Reference Data (Typical Example) p182

Package p185

!Caution/Notice p188

Chip Monolithic Ceramic Capacitors

(Medium Voltage)

For General Purpose

GRM (250Vdc min.)/GRJ/GR3 Series

Temperature Compensating Type

GRM Series (250Vdc min.) p136

High Dielectric Constant Type

GRM Series (250Vdc min.) p143

Soft Termination Type GRJ Series p148

Large Capacitance and High Allowable

Ripple Current GR3 Series p153

Only for Applications

For LCD Backlight Inverter Circuit

GRM/DC3.15kV Series p158

For Information Devices GR4 Series p161

For Camera Flash Circuit GR7 Series p165

UL, IEC60384-14 Class X1/Y2 Type GC p173

IEC60384-14 Class Y2, X1/Y2 Type GF p174

IEC60384-14 Class Y3 Type GD p176

IEC60384-14 Class X2 Type GB p177

AC250V Type (Which Meet Japanese Law)

GA2 Series p169

Safety Standard Certified GA3 Series

Contents

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

c Features

1. Low-loss and suitable for high frequency circuits

2. Murata's original internal electrode structure

provides high ﬂ ash-over voltage.

3. A new monolithic structure for small, surface-

mountable devices capable of operating at high

voltage levels

4. Sn-plated external electrodes provides good

solderability.

5. Use the GRM21/31 type with ﬂ ow or reﬂ ow soldering,

and other types with reﬂ ow soldering only.

c Applications

Ideal for use on high frequency pulse circuits such

as snubber circuits for switching power supplies,

DC-DC converters, ballasts (inverter ﬂ uorescent

lamps), etc.

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LW T

Dimensions (mm)

e min. g min.

1.5*

0.7

1.6 ±0.2

2.5 ±0.2

2.0 ±0.2

0.3

2.9

GRM32A

GRM32B

GRM42A

GRM31B

GRM31A

GRM21B

GRM21A

3.2 ±0.2

1.25 ±0.22.0 ±0.2

3.2 ±0.2

4.5 ±0.3

* GRM31A7U3D, GRM32A7U3D, GRM32B7U3D: 1.8mm min.

e eg

1.0 +0,- 0.3

1.25 ±0.2

1.0 +0,- 0.3

3.2 ±0.3 2.2

GRM43Q 4.5 ±0.4 1.5 +0,- 0.3

GRM43D 2.0 +0,- 0.3

5.0 ±0.4 3.2

GRM55Q 5.7 ±0.4 1.5 +0,- 0.3

GRM55D 2.0 +0,- 0.3

1.0 +0,- 0.3

1.25 +0,- 0.3

GRM32Q 1.5 +0,- 0.3

GRM32D 2.0 +0,- 0.3

1.25 +0,- 0.3

GRM31C 1.6 ±0.2

C0G Characteristics

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM21A5C2E100JW01D 250Vdc C0G (EIA) 10pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E120JW01D 250Vdc C0G (EIA) 12pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E150JW01D 250Vdc C0G (EIA) 15pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E180JW01D 250Vdc C0G (EIA) 18pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E220JW01D 250Vdc C0G (EIA) 22pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E270JW01D 250Vdc C0G (EIA) 27pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E330JW01D 250Vdc C0G (EIA) 33pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E390JW01D 250Vdc C0G (EIA) 39pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E470JW01D 250Vdc C0G (EIA) 47pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E560JW01D 250Vdc C0G (EIA) 56pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E680JW01D 250Vdc C0G (EIA) 68pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E820JW01D 250Vdc C0G (EIA) 82pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E101JW01D 250Vdc C0G (EIA) 100pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E121JW01D 250Vdc C0G (EIA) 120pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E151JW01D 250Vdc C0G (EIA) 150pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E181JW01D 250Vdc C0G (EIA) 180pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E221JW01D 250Vdc C0G (EIA) 220pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E271JW01D 250Vdc C0G (EIA) 270pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A5C2E331JW01D 250Vdc C0G (EIA) 330pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM31A5C2J100JW01D 630Vdc C0G (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J120JW01D 630Vdc C0G (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J150JW01D 630Vdc C0G (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J180JW01D 630Vdc C0G (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

Continued on the following page.

Temperature Compensating Type GRM Series (250Vdc min.)

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

136

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM31A5C2J220JW01D 630Vdc C0G (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J270JW01D 630Vdc C0G (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J330JW01D 630Vdc C0G (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J390JW01D 630Vdc C0G (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J470JW01D 630Vdc C0G (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J560JW01D 630Vdc C0G (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J680JW01D 630Vdc C0G (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J820JW01D 630Vdc C0G (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J101JW01D 630Vdc C0G (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J121JW01D 630Vdc C0G (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J151JW01D 630Vdc C0G (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J181JW01D 630Vdc C0G (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J221JW01D 630Vdc C0G (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J271JW01D 630Vdc C0G (EIA) 270pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J331JW01D 630Vdc C0G (EIA) 330pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J391JW01D 630Vdc C0G (EIA) 390pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J471JW01D 630Vdc C0G (EIA) 470pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C2J561JW01D 630Vdc C0G (EIA) 560pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31B5C2J681JW01L 630Vdc C0G (EIA) 680pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B5C2J821JW01L 630Vdc C0G (EIA) 820pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B5C2J102JW01L 630Vdc C0G (EIA) 1000pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31A5C3A100JW01D 1000Vdc C0G (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A120JW01D 1000Vdc C0G (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A150JW01D 1000Vdc C0G (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A180JW01D 1000Vdc C0G (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A220JW01D 1000Vdc C0G (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A270JW01D 1000Vdc C0G (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A330JW01D 1000Vdc C0G (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A390JW01D 1000Vdc C0G (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A470JW01D 1000Vdc C0G (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A560JW01D 1000Vdc C0G (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A680JW01D 1000Vdc C0G (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A820JW01D 1000Vdc C0G (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A101JW01D 1000Vdc C0G (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A121JW01D 1000Vdc C0G (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A151JW01D 1000Vdc C0G (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A181JW01D 1000Vdc C0G (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A5C3A221JW01D 1000Vdc C0G (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

U2J Characteristics

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM21A7U2E101JW31D 250Vdc U2J (EIA) 100pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E121JW31D 250Vdc U2J (EIA) 120pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E151JW31D 250Vdc U2J (EIA) 150pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E181JW31D 250Vdc U2J (EIA) 180pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E221JW31D 250Vdc U2J (EIA) 220pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E271JW31D 250Vdc U2J (EIA) 270pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E331JW31D 250Vdc U2J (EIA) 330pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E391JW31D 250Vdc U2J (EIA) 390pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E471JW31D 250Vdc U2J (EIA) 470pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E561JW31D 250Vdc U2J (EIA) 560pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E681JW31D 250Vdc U2J (EIA) 680pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E821JW31D 250Vdc U2J (EIA) 820pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E102JW31D 250Vdc U2J (EIA) 1000pF±5% 2 1.25 1 0.7mm 0.3mm min.

Continued on the following page.

C02E.pdf

Oct.1,2012

137

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM21A7U2E122JW31D 250Vdc U2J (EIA) 1200pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E152JW31D 250Vdc U2J (EIA) 1500pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E182JW31D 250Vdc U2J (EIA) 1800pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21A7U2E222JW31D 250Vdc U2J (EIA) 2200pF±5% 2 1.25 1 0.7mm 0.3mm min.

GRM21B7U2E272JW32L 250Vdc U2J (EIA) 2700pF±5% 2 1.25 1.45 0.7mm 0.3mm min.

GRM31A7U2E272JW31D 250Vdc U2J (EIA) 2700pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM21B7U2E332JW32L 250Vdc U2J (EIA) 3300pF±5% 2 1.25 1.45 0.7mm 0.3mm min.

GRM31A7U2E332JW31D 250Vdc U2J (EIA) 3300pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM21B7U2E392JW32L 250Vdc U2J (EIA) 3900pF±5% 2 1.25 1.45 0.7mm 0.3mm min.

GRM31A7U2E392JW31D 250Vdc U2J (EIA) 3900pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM21B7U2E472JW32L 250Vdc U2J (EIA) 4700pF±5% 2 1.25 1.45 0.7mm 0.3mm min.

GRM31A7U2E472JW31D 250Vdc U2J (EIA) 4700pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM21B7U2E562JW32L 250Vdc U2J (EIA) 5600pF±5% 2 1.25 1.45 0.7mm 0.3mm min.

GRM31A7U2E562JW31D 250Vdc U2J (EIA) 5600pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31B7U2E682JW31L 250Vdc U2J (EIA) 6800pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B7U2E822JW31L 250Vdc U2J (EIA) 8200pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B7U2E103JW31L 250Vdc U2J (EIA) 10000pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31A7U2J100JW31D 630Vdc U2J (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J120JW31D 630Vdc U2J (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J150JW31D 630Vdc U2J (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J180JW31D 630Vdc U2J (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J220JW31D 630Vdc U2J (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J270JW31D 630Vdc U2J (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J330JW31D 630Vdc U2J (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J390JW31D 630Vdc U2J (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J470JW31D 630Vdc U2J (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J560JW31D 630Vdc U2J (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J680JW31D 630Vdc U2J (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J820JW31D 630Vdc U2J (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J101JW31D 630Vdc U2J (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J121JW31D 630Vdc U2J (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J151JW31D 630Vdc U2J (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J181JW31D 630Vdc U2J (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J221JW31D 630Vdc U2J (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J271JW31D 630Vdc U2J (EIA) 270pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J331JW31D 630Vdc U2J (EIA) 330pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J391JW31D 630Vdc U2J (EIA) 390pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J471JW31D 630Vdc U2J (EIA) 470pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J561JW31D 630Vdc U2J (EIA) 560pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J681JW31D 630Vdc U2J (EIA) 680pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J821JW31D 630Vdc U2J (EIA) 820pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J102JW31D 630Vdc U2J (EIA) 1000pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U2J122JW31D 630Vdc U2J (EIA) 1200pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM32A7U2J122JW31D 630Vdc U2J (EIA) 1200pF±5% 3.2 2.5 1 1.5mm 0.3mm min.

GRM31A7U2J152JW31D 630Vdc U2J (EIA) 1500pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM32A7U2J152JW31D 630Vdc U2J (EIA) 1500pF±5% 3.2 2.5 1 1.5mm 0.3mm min.

GRM31A7U2J182JW31D 630Vdc U2J (EIA) 1800pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM32A7U2J182JW31D 630Vdc U2J (EIA) 1800pF±5% 3.2 2.5 1 1.5mm 0.3mm min.

GRM31A7U2J222JW31D 630Vdc U2J (EIA) 2200pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM32A7U2J222JW31D 630Vdc U2J (EIA) 2200pF±5% 3.2 2.5 1 1.5mm 0.3mm min.

GRM31B7U2J272JW31L 630Vdc U2J (EIA) 2700pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B7U2J332JW31L 630Vdc U2J (EIA) 3300pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31C7U2J392JW32L 630Vdc U2J (EIA) 3900pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min.

GRM31C7U2J472JW32L 630Vdc U2J (EIA) 4700pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min.

GRM32B7U2J562JW31L 630Vdc U2J (EIA) 5600pF±5% 3.2 2.5 1.25 1.5mm 0.3mm min.

GRM32Q7U2J682JW31L 630Vdc U2J (EIA) 6800pF±5% 3.2 2.5 1.5 1.5mm 0.3mm min.

GRM32D7U2J822JW31L 630Vdc U2J (EIA) 8200pF±5% 3.2 2.5 2 1.5mm 0.3mm min.

Continued on the following page.

C02E.pdf

Oct.1,2012

138

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM32D7U2J103JW31L 630Vdc U2J (EIA) 10000pF±5% 3.2 2.5 2 1.5mm 0.3mm min.

GRM43Q7U2J123JW31L 630Vdc U2J (EIA) 12000pF±5% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRM43D7U2J153JW31L 630Vdc U2J (EIA) 15000pF±5% 4.5 3.2 2 2.2mm 0.3mm min.

GRM43D7U2J183JW31L 630Vdc U2J (EIA) 18000pF±5% 4.5 3.2 2 2.2mm 0.3mm min.

GRM43D7U2J223JW31L 630Vdc U2J (EIA) 22000pF±5% 4.5 3.2 2 2.2mm 0.3mm min.

GRM55Q7U2J273JW31L 630Vdc U2J (EIA) 27000pF±5% 5.7 5.0 1.5 3.2mm 0.3mm min.

GRM55D7U2J333JW31L 630Vdc U2J (EIA) 33000pF±5% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55D7U2J393JW31L 630Vdc U2J (EIA) 39000pF±5% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55D7U2J473JW31L 630Vdc U2J (EIA) 47000pF±5% 5.7 5.0 2 3.2mm 0.3mm min.

GRM31A7U3A100JW31D 1000Vdc U2J (EIA) 10pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A120JW31D 1000Vdc U2J (EIA) 12pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A150JW31D 1000Vdc U2J (EIA) 15pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A180JW31D 1000Vdc U2J (EIA) 18pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A220JW31D 1000Vdc U2J (EIA) 22pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A270JW31D 1000Vdc U2J (EIA) 27pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A330JW31D 1000Vdc U2J (EIA) 33pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A390JW31D 1000Vdc U2J (EIA) 39pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A470JW31D 1000Vdc U2J (EIA) 47pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A560JW31D 1000Vdc U2J (EIA) 56pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A680JW31D 1000Vdc U2J (EIA) 68pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A820JW31D 1000Vdc U2J (EIA) 82pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A101JW31D 1000Vdc U2J (EIA) 100pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A121JW31D 1000Vdc U2J (EIA) 120pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A151JW31D 1000Vdc U2J (EIA) 150pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A181JW31D 1000Vdc U2J (EIA) 180pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A221JW31D 1000Vdc U2J (EIA) 220pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A271JW31D 1000Vdc U2J (EIA) 270pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31A7U3A331JW31D 1000Vdc U2J (EIA) 330pF±5% 3.2 1.6 1 1.5mm 0.3mm min.

GRM31B7U3A391JW31L 1000Vdc U2J (EIA) 390pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B7U3A471JW31L 1000Vdc U2J (EIA) 470pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B7U3A561JW31L 1000Vdc U2J (EIA) 560pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31B7U3A681JW31L 1000Vdc U2J (EIA) 680pF±5% 3.2 1.6 1.25 1.5mm 0.3mm min.

GRM31C7U3A821JW32L 1000Vdc U2J (EIA) 820pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min.

GRM31C7U3A102JW32L 1000Vdc U2J (EIA) 1000pF±5% 3.2 1.6 1.8 1.5mm 0.3mm min.

GRM32B7U3A122JW31L 1000Vdc U2J (EIA) 1200pF±5% 3.2 2.5 1.25 1.5mm 0.3mm min.

GRM32Q7U3A152JW31L 1000Vdc U2J (EIA) 1500pF±5% 3.2 2.5 1.5 1.5mm 0.3mm min.

GRM32D7U3A182JW31L 1000Vdc U2J (EIA) 1800pF±5% 3.2 2.5 2 1.5mm 0.3mm min.

GRM32D7U3A222JW31L 1000Vdc U2J (EIA) 2200pF±5% 3.2 2.5 2 1.5mm 0.3mm min.

GRM43Q7U3A272JW31L 1000Vdc U2J (EIA) 2700pF±5% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRM43Q7U3A332JW31L 1000Vdc U2J (EIA) 3300pF±5% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRM43D7U3A392JW31L 1000Vdc U2J (EIA) 3900pF±5% 4.5 3.2 2 2.2mm 0.3mm min.

GRM43D7U3A472JW31L 1000Vdc U2J (EIA) 4700pF±5% 4.5 3.2 2 2.2mm 0.3mm min.

GRM55Q7U3A562JW31L 1000Vdc U2J (EIA) 5600pF±5% 5.7 5.0 1.5 3.2mm 0.3mm min.

GRM55Q7U3A682JW31L 1000Vdc U2J (EIA) 6800pF±5% 5.7 5.0 1.5 3.2mm 0.3mm min.

GRM55D7U3A822JW31L 1000Vdc U2J (EIA) 8200pF±5% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55D7U3A103JW31L 1000Vdc U2J (EIA) 10000pF±5% 5.7 5.0 2 3.2mm 0.3mm min.

GRM31A7U3D100JW31D 2000Vdc U2J (EIA) 10pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D120JW31D 2000Vdc U2J (EIA) 12pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D150JW31D 2000Vdc U2J (EIA) 15pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D180JW31D 2000Vdc U2J (EIA) 18pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D220JW31D 2000Vdc U2J (EIA) 22pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D270JW31D 2000Vdc U2J (EIA) 27pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D330JW31D 2000Vdc U2J (EIA) 33pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D390JW31D 2000Vdc U2J (EIA) 39pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D470JW31D 2000Vdc U2J (EIA) 47pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D560JW31D 2000Vdc U2J (EIA) 56pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

GRM31A7U3D680JW31D 2000Vdc U2J (EIA) 68pF±5% 3.2 1.6 1 1.8mm 0.3mm min.

Continued on the following page.

C02E.pdf

Oct.1,2012

139

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM32A7U3D820JW31D 2000Vdc U2J (EIA) 82pF±5% 3.2 2.5 1 1.8mm 0.3mm min.

GRM32A7U3D101JW31D 2000Vdc U2J (EIA) 100pF±5% 3.2 2.5 1 1.8mm 0.3mm min.

GRM32A7U3D121JW31D 2000Vdc U2J (EIA) 120pF±5% 3.2 2.5 1 1.8mm 0.3mm min.

GRM32A7U3D151JW31D 2000Vdc U2J (EIA) 150pF±5% 3.2 2.5 1 1.8mm 0.3mm min.

GRM32B7U3D181JW31L 2000Vdc U2J (EIA) 180pF±5% 3.2 2.5 1.25 1.8mm 0.3mm min.

GRM32B7U3D221JW31L 2000Vdc U2J (EIA) 220pF±5% 3.2 2.5 1.25 1.8mm 0.3mm min.

GRM42A7U3F270JW31L 3150Vdc U2J (EIA) 27pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F330JW31L 3150Vdc U2J (EIA) 33pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F390JW31L 3150Vdc U2J (EIA) 39pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F470JW31L 3150Vdc U2J (EIA) 47pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F560JW31L 3150Vdc U2J (EIA) 56pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F680JW31L 3150Vdc U2J (EIA) 68pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F820JW31L 3150Vdc U2J (EIA) 82pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A7U3F101JW31L 3150Vdc U2J (EIA) 100pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

C02E.pdf

Oct.1,2012

140

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM Series Speciﬁ cations and Test Methods

Continued on the following page.

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

Q1,000 min.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

9Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

Capacitance

Temperature

Characteristics

Temp. Coefficient

C0G char. :

0±30ppm/°C (Temp. Range : +25 to +125°C)

0+30, –72ppm/°C (Temp. Range : –55 to +25°C)

U2J char. :

–750±120ppm/°C (Temp. Range : +25 to +125°C)

–750+120, –347ppm/°C (Temp. Range : –55 to +25°C)

7Q 1,000 min.

The capacitance/Q should be measured at the frequency and

voltage shown as follows.

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

(DC250±25V in case of rated voltage: DC250V) and within 60±5

sec. of charging.

Insulation Resistance

(I.R.)

More than 10,000MΩ

No failure should be observed when voltage in the Table is

applied between the terminations for 1 to 5 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimension

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Rated Voltage Test Voltage

200% of the rated voltage

150% of the rated voltage

130% of the rated voltage

DC250V

DC630V

DC1kV, DC2kV,

DC3.15kV

Capacitance Frequency

1±0.2MHz

1±0.2kHz

Voltage

AC0.5 to 5V(r.m.s.)

AC1±0.2V(r.m.s.)

CF1,000pF

CU1,000pF

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

10N, 10±1s

Glass Epoxy Board

Solder resist

Glass Epoxy Board

C02E.pdf

Oct.1,2012

141

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply voltage as in Table for 1,000

W48

Y 0

hrs. at maximum

operating temperature ±3°C.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

The charge/discharge current is less than 50mA.

16 Life

Appearance

No marking defects

Capacitance

Change

Within ±3.0%

Q350 min.

I.R. More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

Humidity

(Steady

State)

Appearance

No marking defects

Capacitance

Change

Within ±5.0%

Q350 min.

I.R. More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

Fig. 4

Temperature

Cycle

Appearance

No marking defects

Capacitance

Change

Within ±2.5%

Q500 min.

I.R. More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Preheat the capacitor at 120 to 150°C* for 1 min.

Immerse the capacitor in solder solution at 260±5°C for 10±1 sec.

Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`: 25±2.5mm/s

*Preheating for more than 3.2Z2.5mm

,iÃÃÌ>ViÊ

to Soldering

Heat

Appearance

No marking defects

Capacitance

Change

Within ±2.5%

Q1,000 min.

I.R. More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in

solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

12 Solderability of

Termination

75% of the terminations are to be soldered evenly

and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

11 Deflection

No marking defects

Fig. 2

No. /iÃÌÊiÌ`-«iVvV>ÌÃItem

LZW

(mm) a

iÃÊ®

1.2

2.2

3.5

4.5

4.0

5.0

7.0

8.0

1.65

2.0

2.9

2.4

3.7

5.6

1.0

2.0Z1.25

3.2Z1.6

3.2Z2.5

4.5Z2.0

4.5Z3.2

5.7Z5.0

Step Temperature

100 to 120°C

170 to 200°C

Time

1 min.

Step Temperature (°C)

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

Time (min.)

30±3

2 to 3

30±3

2 to 3

Rated Voltage Applied Voltage

150% of the rated voltage

120% of the rated voltage

DC250V

DC630V, DC1kV,

DC2kV, DC3.15kV

Fig. 3

Capacitance meter

Flexure=1

(in mm)

20 50

R230

45 45

Pressurizing

speed: 1.0mm/s

Pressurize

Solder resist

Glass Epoxy Board

100

ø4.5

t : 1.6

C02E.pdf

Oct.1,2012

142

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels.

2. Sn-plated external electrodes provide good

solderability.

3. Use the GRM18/21/31 types with ﬂ ow or reﬂ ow

soldering, and other types with reﬂ ow soldering

only.

c Applications

1. Ideal for use on clamp-snubber circuits for

switching power supplies.

2. Ideal for use as primary-secondary coupling for

DC-DC converters.

3. Ideal for use on line ﬁ lters and ringer detectors

for telephones, facsimiles and modems.

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

e eg

Part Number LW T

Dimensions (mm)

g min.

2.0 ±0.2

3.2 ±0.2

1.25 ±0.2

1.6 ±0.2

1.0 +0,-0.3

1.25 +0,-0.3

0.7

1.25 ±0.2

1.2

2.2

3.2

0.4

1.6 ±0.2

1.5 +0,-0.3

2.0 +0,-0.3

3.2 ±0.3 2.5 ±0.2

4.5 ±0.4 3.2 ±0.3

5.7 ±0.4 5.0 ±0.4

0.8 ±0.1

0.2 to 0.5

0.3 min.

1.6 ±0.1 0.8 ±0.1

GRM21A

GRM21B

GRM188

GRM31B

GRM31C

GRM32Q

GRM32D

GRM43Q

GRM43D

GRM55D

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM188R72E221KW07D 250Vdc X7R (EIA) 220pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM188R72E331KW07D 250Vdc X7R (EIA) 330pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM188R72E471KW07D 250Vdc X7R (EIA) 470pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM188R72E681KW07D 250Vdc X7R (EIA) 680pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM188R72E102KW07D 250Vdc X7R (EIA) 1000pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM21AR72E102KW01D 250Vdc X7R (EIA) 1000pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRM188R72E152KW07D 250Vdc X7R (EIA) 1500pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM21AR72E152KW01D 250Vdc X7R (EIA) 1500pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRM188R72E222KW07D 250Vdc X7R (EIA) 2200pF±10% 1.6 0.8 0.9 0.4mm 0.2 to 0.5mm

GRM21AR72E222KW01D 250Vdc X7R (EIA) 2200pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRM21AR72E332KW01D 250Vdc X7R (EIA) 3300pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRM21AR72E472KW01D 250Vdc X7R (EIA) 4700pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRM21AR72E682KW01D 250Vdc X7R (EIA) 6800pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRM21BR72E103KW03L 250Vdc X7R (EIA) 10000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GRM31BR72E153KW01L 250Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72E223KW01L 250Vdc X7R (EIA) 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31CR72E333KW03L 250Vdc X7R (EIA) 33000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRM31CR72E473KW03L 250Vdc X7R (EIA) 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRM31BR72E683KW01L 250Vdc X7R (EIA) 68000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM32QR72E683KW01L 250Vdc X7R (EIA) 68000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRM31CR72E104KW03L 250Vdc X7R (EIA) 0.10µF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRM32DR72E104KW01L 250Vdc X7R (EIA) 0.10µF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRM32QR72E154KW01L 250Vdc X7R (EIA) 0.15µF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRM43QR72E154KW01L 250Vdc X7R (EIA) 0.15µF±10% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRM32DR72E224KW01L 250Vdc X7R (EIA) 0.22µF±10% 3.2 2.5 2 1.2mm 0.3mm min.

Continued on the following page.

High Dielectric Constant Type GRM Series (250Vdc min.)

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

143

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM43DR72E224KW01L 250Vdc X7R (EIA) 0.22µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRM43DR72E334KW01L 250Vdc X7R (EIA) 0.33µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRM55DR72E334KW01L 250Vdc X7R (EIA) 0.33µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM43DR72E474KW01L 250Vdc X7R (EIA) 0.47µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRM55DR72E474KW01L 250Vdc X7R (EIA) 0.47µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55DR72E684KW01L 250Vdc X7R (EIA) 0.68µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55DR72E105KW01L 250Vdc X7R (EIA) 1.0µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM31BR72J102KW01L 630Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72J152KW01L 630Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72J222KW01L 630Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72J332KW01L 630Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72J472KW01L 630Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72J682KW01L 630Vdc X7R (EIA) 6800pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR72J103KW01L 630Vdc X7R (EIA) 10000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31CR72J153KW03L 630Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRM32QR72J223KW01L 630Vdc X7R (EIA) 22000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRM32DR72J333KW01L 630Vdc X7R (EIA) 33000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRM32DR72J473KW01L 630Vdc X7R (EIA) 47000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRM43QR72J683KW01L 630Vdc X7R (EIA) 68000pF±10% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRM43DR72J104KW01L 630Vdc X7R (EIA) 0.10µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRM55DR72J154KW01L 630Vdc X7R (EIA) 0.15µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55DR72J224KW01L 630Vdc X7R (EIA) 0.22µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM31BR73A471KW01L 1000Vdc X7R (EIA) 470pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR73A681KW01L 1000Vdc X7R (EIA) 680pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR73A102KW01L 1000Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR73A152KW01L 1000Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR73A222KW01L 1000Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR73A332KW01L 1000Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM31BR73A472KW01L 1000Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRM32QR73A682KW01L 1000Vdc X7R (EIA) 6800pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRM32QR73A103KW01L 1000Vdc X7R (EIA) 10000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRM32DR73A153KW01L 1000Vdc X7R (EIA) 15000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRM32DR73A223KW01L 1000Vdc X7R (EIA) 22000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRM43DR73A333KW01L 1000Vdc X7R (EIA) 33000pF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRM43DR73A473KW01L 1000Vdc X7R (EIA) 47000pF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRM55DR73A683KW01L 1000Vdc X7R (EIA) 68000pF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GRM55DR73A104KW01L 1000Vdc X7R (EIA) 0.10µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

C02E.pdf

Oct.1,2012

144

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM Series Speciﬁ cations and Test Methods

Continued on the following page.

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. 0.025 max.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

9Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

Within ±15%

(Temp. Range: –55 to +125°C)

7Dissipation

Factor (D.F.) 0.025 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

(DC250±25V in case of rated voltage: DC250V) and within 60±5

sec. of charging.

Insulation Resistance

(I.R.)

CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

No failure should be observed when 150% of the rated voltage

(200% of the rated voltage in case of rated voltage: DC250V,

120% of the rated voltage in case of rated voltage: DC1kV) is

applied between the terminations for 1 to 5 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Solder resist

Glass Epoxy Board

10N (5N : Size 1.6g0.8mm only), 10±1s

Glass Epoxy Board

C02E.pdf

Oct.1,2012

145

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

+24

–0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

-Ìi>`ÞÊ

-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±7.5%

D.F. 0.025 max.

I.R. CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Preheat the capacitor at 120 to 150°C* for 1 min.

Immerse the capacitor in solder solution at 260±5°C for 10±1

sec. Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`\Ê25±2.5mm/s

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

*Preheating for more than 3.2Z2.5mm

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. 0.025 max.

I.R. CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

12 -`iÀ>LÌÞÊvÊ

/iÀ>Ì 75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

(in mm)

Fig. 3

11 iviVÌ

No marking defects

Fig. 2

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

100

ø4.5

t : 1.6

Capacitance meter

Flexure=1

20 50

R230

45 45

Pressurizing

speed: 1.0mm/s

Pressurize

LZW

®

iÃÊ®

1.0

1.2

2.2

3.5

4.5

3.0

4.0

5.0

7.0

8.0

1.2

1.65

2.0

2.9

3.7

5.6

1.0

1.6Z0.8

2.0Z1.25

3.2Z1.6

3.2Z2.5

4.5Z3.2

5.7Z5.0

-Ìi« /i«iÀ>ÌÕÀi

100 to 120°C

170 to 200°C

/i

1 min.

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

Solder resist

Glass Epoxy Board

C02E.pdf

Oct.1,2012

146

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply the rated voltage at 40±2°C and relative humidity of 90 to

95% for 500

+24

–0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

>`}Ê

««V>Ì\Ê

Óxä6]Ê

ÈÎä6Ê

Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Apply 120% of the rated voltage (150% of the rated voltage in

case of rated voltage: DC250V, 110% of the rated voltage in case

of rated voltage: DC1kV) for 1,000

+48

–0

hrs. at maximum

operating temperature ±3°C. Remove and let sit for 24±2hrs. at

room condition,* then measure.

The charge/discharge current is less than 50mA.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

16 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15% (rated voltage: DC250V, DC630V)

Within ±20% (rated voltage: DC1kV)

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

No. /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

147

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. Improves endurance against Board Bending Stress.

2. Reduces the board bending stress by the conductive

polymer termination.

3. Use the GRJ21/31 types with ﬂ ow or reﬂ ow

soldering, and other types with reﬂ ow soldering

only.

c Applications

1. Ideal for use on clamp-snubber circuits for

switching power supplies.

2. Ideal for use as primary-secondary coupling for

DC-DC converters.

3. Ideal for use on line ﬁ lters and ringer detectors

for telephones, facsimiles and modems.

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

e eg

Part Number LW T

Dimensions (mm)

g min.

3.2 ±0.2 1.6 ±0.2 1.25 +0,-0.3

1.2

2.2

3.2

1.6 ±0.2

1.5 +0,-0.3

2.0 +0,-0.3

3.2 ±0.3 2.5 ±0.2

4.5 ±0.4 3.2 ±0.3

5.7 ±0.4 5.0 ±0.4

0.3 min.

GRJ31B

GRJ31C

2.0 ±0.2 1.25 ±0.2 1.0 +0,-0.3 0.7

1.25 ±0.2

GRJ21A

GRJ21B

GRJ32Q

GRJ32D

GRJ43Q

GRJ43D

GRJ55D

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRJ21AR72E102KWJ1D 250Vdc X7R (EIA) 1000pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRJ21AR72E152KWJ1D 250Vdc X7R (EIA) 1500pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRJ21AR72E222KWJ1D 250Vdc X7R (EIA) 2200pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRJ21AR72E332KWJ1D 250Vdc X7R (EIA) 3300pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRJ21AR72E472KWJ1D 250Vdc X7R (EIA) 4700pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRJ21AR72E682KWJ1D 250Vdc X7R (EIA) 6800pF±10% 2 1.25 1 0.7mm 0.3mm min.

GRJ21BR72E103KWJ3L 250Vdc X7R (EIA) 10000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GRJ21BR72E153KWJ3L 250Vdc X7R (EIA) 15000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GRJ31BR72E153KWJ1L 250Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ21BR72E223KWJ3L 250Vdc X7R (EIA) 22000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GRJ31BR72E223KWJ1L 250Vdc X7R (EIA) 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31CR72E333KWJ3L 250Vdc X7R (EIA) 33000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ31CR72E473KWJ3L 250Vdc X7R (EIA) 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ31BR72E683KWJ1L 250Vdc X7R (EIA) 68000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ32QR72E683KWJ1L 250Vdc X7R (EIA) 68000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRJ31CR72E104KWJ3L 250Vdc X7R (EIA) 0.10µF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ32DR72E104KWJ1L 250Vdc X7R (EIA) 0.10µF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRJ32QR72E154KWJ1L 250Vdc X7R (EIA) 0.15µF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRJ43QR72E154KWJ1L 250Vdc X7R (EIA) 0.15µF±10% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRJ32DR72E224KWJ1L 250Vdc X7R (EIA) 0.22µF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRJ43DR72E224KWJ1L 250Vdc X7R (EIA) 0.22µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRJ43DR72E334KWJ1L 250Vdc X7R (EIA) 0.33µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRJ55DR72E334KWJ1L 250Vdc X7R (EIA) 0.33µF±10% 5.7 5 2 3.2mm 0.3mm min.

GRJ43DR72E474KWJ1L 250Vdc X7R (EIA) 0.47µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRJ55DR72E474KWJ1L 250Vdc X7R (EIA) 0.47µF±10% 5.7 5 2 3.2mm 0.3mm min.

GRJ55DR72E684KWJ1L 250Vdc X7R (EIA) 0.68µF±10% 5.7 5 2 3.2mm 0.3mm min.

GRJ55DR72E105KWJ1L 250Vdc X7R (EIA) 1.0µF±10% 5.7 5 2 3.2mm 0.3mm min.

Continued on the following page.

Soft Termination Type GRJ Series

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

148

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Deflecting

crack

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRJ31BR72J102KWJ1L 630Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR72J152KWJ1L 630Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR72J222KWJ1L 630Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR72J332KWJ1L 630Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR72J472KWJ1L 630Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR72J682KWJ1L 630Vdc X7R (EIA) 6800pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR72J103KWJ1L 630Vdc X7R (EIA) 10000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31CR72J153KWJ3L 630Vdc X7R (EIA) 15000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ31CR72J223KWJ3L 630Vdc X7R (EIA) 22000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ32QR72J223KWJ1L 630Vdc X7R (EIA) 22000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRJ32DR72J333KWJ1L 630Vdc X7R (EIA) 33000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRJ32DR72J473KWJ1L 630Vdc X7R (EIA) 47000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRJ43QR72J683KWJ1L 630Vdc X7R (EIA) 68000pF±10% 4.5 3.2 1.5 2.2mm 0.3mm min.

GRJ43DR72J104KWJ1L 630Vdc X7R (EIA) 0.10µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRJ55DR72J154KWJ1L 630Vdc X7R (EIA) 0.15µF±10% 5.7 5 2 3.2mm 0.3mm min.

GRJ55DR72J224KWJ1L 630Vdc X7R (EIA) 0.22µF±10% 5.7 5 2 3.2mm 0.3mm min.

GRJ31BR73A471KWJ1L 1000Vdc X7R (EIA) 470pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR73A681KWJ1L 1000Vdc X7R (EIA) 680pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR73A102KWJ1L 1000Vdc X7R (EIA) 1000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR73A152KWJ1L 1000Vdc X7R (EIA) 1500pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR73A222KWJ1L 1000Vdc X7R (EIA) 2200pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR73A332KWJ1L 1000Vdc X7R (EIA) 3300pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31BR73A472KWJ1L 1000Vdc X7R (EIA) 4700pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GRJ31CR73A682KWJ3L 1000Vdc X7R (EIA) 6800pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ32QR73A682KWJ1L 1000Vdc X7R (EIA) 6800pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRJ31CR73A103KWJ3L 1000Vdc X7R (EIA) 10000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GRJ32QR73A103KWJ1L 1000Vdc X7R (EIA) 10000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GRJ32DR73A153KWJ1L 1000Vdc X7R (EIA) 15000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRJ32DR73A223KWJ1L 1000Vdc X7R (EIA) 22000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GRJ43DR73A333KWJ1L 1000Vdc X7R (EIA) 33000pF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRJ43DR73A473KWJ1L 1000Vdc X7R (EIA) 47000pF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GRJ55DR73A683KWJ1L 1000Vdc X7R (EIA) 68000pF±10% 5.7 5 2 3.2mm 0.3mm min.

GRJ55DR73A104KWJ1L 1000Vdc X7R (EIA) 0.10µF±10% 5.7 5 2 3.2mm 0.3mm min.

C02E.pdf

Oct.1,2012

149

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRJ Series Speciﬁ cations and Test Methods

Continued on the following page.

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

Rated Voltage Test Voltage

200% of the rated voltage

150% of the rated voltage

120% of the rated voltage

DC250V

DC630V

DC1kV

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. 0.025 max.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

9Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

Within ±15%

(Temp. Range: –55 to +125°C)

7Dissipation

Factor (D.F.) 0.025 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

(DC250±25V in case of rated voltage: DC250V) and within 60±5

sec. of charging.

Insulation Resistance

(I.R.)

CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

No failure should be observed when voltage in the Table is

applied between the terminations for 1 to 5 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Solder resist

Glass Epoxy Board

10N, 10±1s

Glass Epoxy Board

C02E.pdf

Oct.1,2012

150

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRJ Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

+24

–0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

-Ìi>`ÞÊ

-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±7.5%

D.F. 0.025 max.

I.R. CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Preheat the capacitor at 120 to 150°C* for 1 min.

Immerse the capacitor in solder solution at 260±5°C for 10±1

sec. Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`\Ê25±2.5mm/s

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

*Preheating for more than 3.2Z2.5mm

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. 0.025 max.

I.R. CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

12 -`iÀ>LÌÞÊvÊ

/iÀ>Ì 75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

(in mm)

Fig. 3

11 iviVÌ

No marking defects

Within ±12.5%

Fig. 2

««i>À>Vi

>«>VÌ>ViÊ

>}i

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

100

ø4.5

t : 1.6

Capacitance meter

Flexure=3 (2mm for 2.0x1.25mm)

20 50

R230

45 45

Pressurizing

speed: 1.0mm/s

Pressurize

LZW

®

iÃÊ®

1.2

2.2

3.5

4.5

4.0

5.0

7.0

8.0

1.65

2.0

2.9

3.7

5.6

1.0

2.0Z1.25

3.2Z1.6

3.2Z2.5

4.5Z3.2

5.7Z5.0

-Ìi« /i«iÀ>ÌÕÀi

100 to 120°C

170 to 200°C

/i

1 min.

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

Solder resist

Glass Epoxy Board

C02E.pdf

Oct.1,2012

151

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRJ Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply the rated voltage at 40±2°C and relative humidity of 90 to

95% for 500

+24

–0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

>`}Ê

««V>Ì\Ê

Óxä6]Ê

ÈÎä6Ê

Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Apply voltage as in Table for 1,000

+48

–0

hrs. at maximum

operating temperature ±3°C. Remove and let sit for 24±2 hrs. at

room condition,* then measure.

The charge/discharge current is less than 50mA.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

16 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15% (rated voltage: DC250V, DC630V)

Within ±20% (rated voltage: DC1kV)

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

No. /iÃÌÊiÌ`-«iVvV>ÌÃÌi

,>Ìi`Ê6Ì>}i ««i`Ê6Ì>}i

150% of the rated voltage

120% of the rated voltage

110% of the rated voltage

DC250V

DC630V

DC1kV

C02E.pdf

Oct.1,2012

152

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. This series can provide higher capacitance value under

DC-Bias condition, compare with previous X7R char.

2. Improve the performance of ripple-resistance compared

with X7R char.

3. Reduce acoustic noise.

4. High reliability for board bending stress

5. Sn-plated external electrodes provide good soldering,

and other types with reﬂ ow soldering only.

6. Use the GR321/331 types with ﬂ ow or reﬂ ow soldering,

and other types with reﬂ ow soldering only.

c Applications

1. DC smoothing & EMI ﬁ liter for LED Lighting.

2. For PFC circuit in the swiching power supplies,

AC adaptor.

3. DC-DC converter for general electronic equipment.

Do not use these products in any Automotive

Power train or Safety equipment incliding Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

appliations such as Power train and Safety equipment.

e eg

Part Number LW T

Dimensions (mm)

g min.

0.7

1.2

2.2

3.2

1.0+0,-0.3

0.3 min.

2.0±0.2 1.25±0.2

GR321A

1.25±0.2

GR321B

1.0+0,-0.3

3.2±0.2 1.6±0.2

GR331A

1.25+0,-0.3

GR331B

1.6±0.2

GR331C

1.5+0,-0.3

3.2±0.3 2.5±0.2

GR332Q

2.0+0,-0.3

GR332D

1.5+0,-0.3

4.5±0.4 3.2±0.3

GR343Q

2.0+0,-0.3

GR343D

2.0+0,-0.3

5.7±0.4 5.0±0.4

GR355D

2.7+0,-0.3

GR355X

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GR321AD72E103KW01D 250Vdc X7T (EIA) 10000pF±10% 2 1.25 1 0.7mm 0.3mm min.

GR321AD72E153KW01D 250Vdc X7T (EIA) 15000pF±10% 2 1.25 1 0.7mm 0.3mm min.

GR321BD72E223KW03L 250Vdc X7T (EIA) 22000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GR331AD72E333KW01D 250Vdc X7T (EIA) 33000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR331BD72E473KW01L 250Vdc X7T (EIA) 47000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GR331CD72E683KW03L 250Vdc X7T (EIA) 68000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GR332QD72E104KW01L 250Vdc X7T (EIA) 0.10µF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GR332DD72E154KW01L 250Vdc X7T (EIA) 0.15µF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GR343QD72E224KW01L 250Vdc X7T (EIA) 0.22µF±10% 4.5 3.2 1.5 2.2mm 0.3mm min.

GR343DD72E334KW01L 250Vdc X7T (EIA) 0.33µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GR355DD72E474KW01L 250Vdc X7T (EIA) 0.47µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355DD72E684KW01L 250Vdc X7T (EIA) 0.68µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355XD72E105KW05L 250Vdc X7T (EIA) 1.0µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min.

GR331AD72W103KW01D 450Vdc X7T (EIA) 10000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR331AD72W153KW01D 450Vdc X7T (EIA) 15000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR331BD72W223KW01L 450Vdc X7T (EIA) 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GR331BD72W333KW01L 450Vdc X7T (EIA) 33000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GR331CD72W473KW03L 450Vdc X7T (EIA) 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GR332DD72W683KW01L 450Vdc X7T (EIA) 68000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GR332DD72W104KW01L 450Vdc X7T (EIA) 0.10µF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GR343DD72W154KW01L 450Vdc X7T (EIA) 0.15µF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GR355DD72W224KW01L 450Vdc X7T (EIA) 0.22µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355DD72W334KW01L 450Vdc X7T (EIA) 0.33µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355DD72W474KW01L 450Vdc X7T (EIA) 0.47µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355XD72W564KW05L 450Vdc X7T (EIA) 0.56µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min.

Continued on the following page.

Large Capacitance and High Allowable Ripple Current GR3 Series

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

153

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Anti-

noise

Continued from the preceding page.

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GR331BD72J103KW01L 630Vdc X7T (EIA) 10000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GR331CD72J153KW03L 630Vdc X7T (EIA) 15000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

GR332QD72J223KW01L 630Vdc X7T (EIA) 22000pF±10% 3.2 2.5 1.5 1.2mm 0.3mm min.

GR332DD72J333KW01L 630Vdc X7T (EIA) 33000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GR332DD72J473KW01L 630Vdc X7T (EIA) 47000pF±10% 3.2 2.5 2 1.2mm 0.3mm min.

GR343DD72J683KW01L 630Vdc X7T (EIA) 68000pF±10% 4.5 3.2 2 2.2mm 0.3mm min.

GR355DD72J104KW01L 630Vdc X7T (EIA) 0.1µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355DD72J154KW01L 630Vdc X7T (EIA) 0.15µF±10% 5.7 5.0 2 3.2mm 0.3mm min.

GR355XD72J224KW05L 630Vdc X7T (EIA) 0.22µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min.

GR355XD72J274KW05L 630Vdc X7T (EIA) 0.27µF±10% 5.7 5.0 2.7 3.2mm 0.3mm min.

C02E.pdf

Oct.1,2012

154

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR3 Series Speciﬁ cations and Test Methods

Continued on the following page.

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. 0.01 max.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

9Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

Rated Voltage Test Voltage

200% of the rated voltage

150% of the rated voltage

120% of the rated voltage

DC250V

DC450V

DC630V

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

Within

+22

–33

(Temp. Range: –55 to +125°C)

7Dissipation

Factor (D.F.) 0.01 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

(DC250±25V in case of rated voltage: DC250V, DC450V) and

within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

More than 10,000MΩ or 100MΩs&7HICHEVERISSMALLER

No failure should be observed when voltage in Table is applied

between the terminations for 1 to 5 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Solder resist

Glass Epoxy Board

10N, 10±1s

Glass Epoxy Board

C02E.pdf

Oct.1,2012

155

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR3 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

+24

–0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

-Ìi>`ÞÊ

-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±12.5%

D.F. 0.02 max.

I.R. More than 1,000MΩ or 10MΩs&7HICHEVERISSMALLER

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

&IXTHECAPACITORTOTHESUPPORTINGJIGGLASSEPOXYBOARDSHOWN

IN&IG

Perform the 5 cycles according to the 4 heat treatments listed in

THEFOLLOWINGTABLE

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

&IG

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±7.5%

D.F. 0.01 max.

I.R. More than 10,000MΩ or 100MΩs&7HICHEVERISSMALLER

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Preheat the capacitor at 120 to 150°C* for 1 min.

Immerse the capacitor in solder solution at 260±5°C for 10±1

sec. Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`\Ê25±2.5mm/s

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

–10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

*Preheating for more than 3.2Z2.5mm

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. 0.01 max.

I.R. More than 10,000MΩ or 100MΩs&7HICHEVERISSMALLER

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

)MMERSETHECAPACITORINASOLUTIONOFETHANOL*)3+AND

ROSIN*)3+ROSININWEIGHTPROPORTION

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±#,EAD&REE3OLDER3N!G#U

235±#(!OR(!%UTECTIC3OLDER

12 -`iÀ>LÌÞÊvÊ

/iÀ>Ì OFTHETERMINATIONSARETOBESOLDEREDEVENLYANDCONTINUOUSLY

3OLDERTHECAPACITORTOTHETESTINGJIGGLASSEPOXYBOARDSHOWN

IN&IG

4HENAPPLYAFORCEINTHEDIRECTIONSHOWNIN&IG

4HESOLDERINGSHOULDBEDONEUSINGTHEREFLOWMETHODAND

SHOULDBECONDUCTEDWITHCARESOTHATTHESOLDERINGISUNIFORM

and free of defects such as heat shock.

INMM

&IG

11 iviVÌ

No marking defects

&IG

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

100

ø4.5

t : 1.6

Capacitance meter

&LEXUREMMFORZMM

20 50

R230

45 45

Pressurizing

speed : 1.0mm/s

Pressurize

LZW

®

iÃÊ®

1.2

2.2

3.5

4.5

4.0

5.0

7.0

8.0

1.65

2.0

2.9

3.7

5.6

1.0

2.0Z1.25

3.2Z1.6

3.2Z2.5

4.5Z3.2

5.7Z5.0

-Ìi« /i«iÀ>ÌÕÀi

100 to 120°C

170 to 200°C

/i

1 min.

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp.

Room Temp.

Max. Operating Temp.

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

3OLDERRESIST

Glass Epoxy Board

C02E.pdf

Oct.1,2012

156

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR3 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply the rated voltage at 40±2°C and relative humidity of 90 to

95% for 500

+24

–0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

>`}Ê

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±12.5%

D.F. 0.02 max.

I.R. More than 1,000MΩ or 10MΩs&7HICHEVERISSMALLER

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Apply voltage as Table for 1,000

+48

–0

hrs. at maximum

operating temperature ±3°C. Remove and let sit for 24±2hrs. at

room condition,* then measure.

The charge/discharge current is less than 50mA.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

16 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±12.5%

D.F. 0.02 max.

I.R. More than 1,000MΩ or 10MΩs&7HICHEVERISSMALLER

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

No. /iÃÌÊiÌ`-«iVvV>ÌÃÌi

,>Ìi`Ê6Ì>}i ««i`Ê6Ì>}i

150% of the rated voltage

130% of the rated voltage

120% of the rated voltage

DC250V

DC450V

DC630V

C02E.pdf

Oct.1,2012

157

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. Low-loss and suitable for high frequency circuits

2. Murata's original internal electrode structure

realizes high ﬂ ash-over voltage.

3. A new monolithic structure for small, surface-

mountable devices capable of operating at high

voltage levels.

4. Sn-plated external electrodes realize good

solderability.

5. Only for reﬂ ow soldering

6. Capacitance values less than 22pF can be used in

LCD backlight inverter circuits as long as

the applied voltage, peak to peak, is less

than 4.0kV at 100kHz or less.

c Applications

Ideal for use as the ballast in LCD backlight

inverter.

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LW T

Dimensions (mm)

e min. g min.

2.9

0.3GRM42A 2.0 ±0.24.5 ±0.3

e eg

1.0 +0, - 0.3

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GRM42A5C3F050DW01L 3150Vdc C0G (EIA) 5.0pF±0.5pF 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F100JW01L 3150Vdc C0G (EIA) 10pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F120JW01L 3150Vdc C0G (EIA) 12pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F150JW01L 3150Vdc C0G (EIA) 15pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F180JW01L 3150Vdc C0G (EIA) 18pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F220JW01L 3150Vdc C0G (EIA) 22pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F270JW01L 3150Vdc C0G (EIA) 27pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F330JW01L 3150Vdc C0G (EIA) 33pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F390JW01L 3150Vdc C0G (EIA) 39pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

GRM42A5C3F470JW01L 3150Vdc C0G (EIA) 47pF±5% 4.5 2.0 1 2.9mm 0.3mm min.

For LCD Backlight Inverter Circuit GRM/DC3.15kV Series

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

158

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GRM/DC3.15kV Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM/DC3.15kV Series Speciﬁ cations and Test Methods

Continued on the following page.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 3

11 Deflection

No marking defects

Fig. 2

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

Q1,000 min.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

9Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

Capacitance

Temperature

Characteristics

Temp. Coefficient

0±30ppm/°C (Temp. Range: +25 to +125°C)

0+30, –72ppm/°C (Temp. Range: –55 to +25°C)

7Q 1,000 min.

The capacitance/Q should be measured at a frequency of

1±0.2MHz and a voltage of AC0.5 to 5V(r.m.s.).

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

More than 10,000MΩ

No failure should be observed when DC4095V is applied

between the terminations for 1 to 5 sec., provided the charge/

discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimension

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

LZW

(mm) a

Dimension (mm)

3.5

7.0

2.4

1.0

4.5Z2.0

10N, 10±1s

Glass Epoxy Board

Solder resist

Glass Epoxy Board

100

ø4.5

t : 1.6

Capacitance meter

Flexure=1

20 50

R230

45 45 (in mm)

Pressurizing

speed: 1.0mm/s

Pressurize

C02E.pdf

Oct.1,2012

159

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GRM/DC3.15kV Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM/DC3.15kV Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply 120% of the rated voltage for 1,000

W48

Y 0

hrs. at maximum

operating temperature ±3°C.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

The charge/discharge current is less than 50mA.

16 Life

Appearance

No marking defects

Capacitance

Change

Within ±3.0%

Q350 min.

I.R. More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

Humidity

(Steady

State)

Appearance

No marking defects

Capacitance

Change

Within ±5.0%

Q350 min.

I.R. More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

Fig. 4

Temperature

Cycle

Appearance

No marking defects

Capacitance

Change

Within ±2.5%

Q1,000 min.

I.R. More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Preheat the capacitor as in table.

Immerse the capacitor in solder solution at 260±5°C for 10±1 sec.

Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`: 25±2.5mm/s

*Preheating

,iÃÃÌ>ViÊ

to Soldering

Heat

Appearance

No marking defects

Capacitance

Change

Within ±2.5%

Q1,000 min.

I.R. More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion). Immerse in

solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

12 Solderability of

Termination

75% of the terminations are to be soldered evenly

and continuously.

No. /iÃÌÊiÌ`-«iVvV>ÌÃItem

Step Temperature

100 to 120°C

170 to 200°C

Time

1 min.

Step Temperature (°C)

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

Time (min.)

30±3

2 to 3

30±3

2 to 3

Solder resist

Glass Epoxy Board

C02E.pdf

Oct.1,2012

160

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GRM/DC3.15kV Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. These items are designed speciﬁ cally for

telecommunications devices (IEEE802.3) in

Ethernet LAN and primary-secondary coupling for

DC-DC converters.

2. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels

3. Sn-plated external electrodes realize good

solderability.

4. Only for reﬂ ow soldering

c Applications

1. Ideal for use on telecommunications devices in

Ethernet LAN

2. Ideal for use as primary-secondary coupling for

DC-DC converters

Do not use these products in any Automotive

Power train or Safety equipment including Battery

charger for Electric Vehicles and Plug-in Hybrid.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LW T

Dimensions (mm)

e min.

GR442Q

GR443D

2.0 ±0.24.5 ±0.3 1.5 +0, -0.3

0.3

3.2 ±0.34.5 ±0.4 2.0 +0, -0.3

GR443Q

GR455D

1.5 +0, -0.3

2.0 +0, -0.3

g min.

2.5

3.25.0 ±0.45.7 ±0.4

e eg

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GR442QR73D101KW01L 2000Vdc X7R (EIA) 100pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D121KW01L 2000Vdc X7R (EIA) 120pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D151KW01L 2000Vdc X7R (EIA) 150pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D181KW01L 2000Vdc X7R (EIA) 180pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D221KW01L 2000Vdc X7R (EIA) 220pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D271KW01L 2000Vdc X7R (EIA) 270pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D331KW01L 2000Vdc X7R (EIA) 330pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D391KW01L 2000Vdc X7R (EIA) 390pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D471KW01L 2000Vdc X7R (EIA) 470pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D561KW01L 2000Vdc X7R (EIA) 560pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D681KW01L 2000Vdc X7R (EIA) 680pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D821KW01L 2000Vdc X7R (EIA) 820pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D102KW01L 2000Vdc X7R (EIA) 1000pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D122KW01L 2000Vdc X7R (EIA) 1200pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR442QR73D152KW01L 2000Vdc X7R (EIA) 1500pF±10% 4.5 2 1.5 2.5mm 0.3mm min.

GR443QR73D182KW01L 2000Vdc X7R (EIA) 1800pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GR443QR73D222KW01L 2000Vdc X7R (EIA) 2200pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GR443QR73D272KW01L 2000Vdc X7R (EIA) 2700pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GR443QR73D332KW01L 2000Vdc X7R (EIA) 3300pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GR443QR73D392KW01L 2000Vdc X7R (EIA) 3900pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GR443DR73D472KW01L 2000Vdc X7R (EIA) 4700pF±10% 4.5 3.2 2 2.5mm 0.3mm min.

GR455DR73D103KW01L 2000Vdc X7R (EIA) 10000pF±10% 5.7 5 2 3.2mm 0.3mm min.

For Information Devices GR4 Series

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

161

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR4 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR4 Series Speciﬁ cations and Test Methods

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. 0.025 max.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

10 Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

within ±15%

(Temp. Range: –55 to +125°C)

8Dissipation

Factor (D.F.) 0.025 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).

7 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

More than 6,000MΩ

10 impulses of alternating polarity are subjected.

(5 impulses for each polarity)

The interval between impulses is 60 sec.

Applied Pulse: 1.2/50μs

Applied Voltage: 2.5kVo-p

5*ÕÃiÊ6Ì>}i No self healing breakdowns or flash-overs have taken place in

the capacitor.

No failure should be observed when voltage in the table is

applied between the terminations, provided the charge/discharge

current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Rated Voltage Test Voltage

120% of the rated voltage

AC1500V(r.m.s.)

Time

60±1 sec.

DC2kV

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

10N, 10±1s

Glass Epoxy Board

Solder resist

Glass Epoxy Board

C02E.pdf

Oct.1,2012

162

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR4 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR4 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

-Ìi>`ÞÊ

-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. More than 3,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Preheat the capacitor as in table.

Immerse the capacitor in solder solution at 260±5°C for 10±1

sec. Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`: 25±2.5mm/s

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

**Àii>Ì}

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. 0.025 max.

I.R. More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

13 -`iÀ>LÌÞÊvÊ

/iÀ>Ì 75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 3

12 iviVÌ

No marking defects

Fig. 2

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

LZW

® >

iÃÊ®

3.5

4.5

7.0

8.0

2.4

3.7

5.6

1.0

4.5Z2.0

4.5Z3.2

5.7Z5.0

-Ìi« /i«iÀ>ÌÕÀi

100 to 120°C

170 to 200°C

/i

1 min.

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

Solder resist

Glass Epoxy Board

100

ø4.5

t : 1.6

Capacitance meter

Flexure=1

20 50

R230

45 45 (in mm)

Pressurizing

speed: 1.0mm/s

Pressurize

C02E.pdf

Oct.1,2012

163

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR4 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR4 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply 110% of the rated voltage for 1,000

W48

Y 0

hrs. at maximum

operating temperature ±3°C. Remove and let sit for 24±2 hrs. at

room condition,* then measure.

The charge/discharge current is less than 50mA.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

17 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±20%

D.F. 0.05 max.

I.R. More than 2,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

No. /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

164

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR4 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. Suitable for the trigger of the ﬂ ash circuit,

because real capacitance is stable during

operating voltage.

2. The thin type ﬁ ts thinner cameras.

3. Sn-plated external electrodes realize good

solderability.

4. For ﬂ ow and reﬂ ow soldering

c Applications

For strobe circuit

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

e eg

Part Number LW T

Dimensions (mm)

g min.

GR731A

GR731B

1.0 +0, -0.3

1.21.6 ±0.23.2 ±0.2 1.25 +0, -0.3

GR721A 0.7

e min.

0.3

1.25 ±0.22.0 ±0.2 1.0 +0, -0.3

GR721B 1.25 ±0.2

GR731C 1.6 ±0.2

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GR721AW0BB103KW01D 350Vdc - 10000pF±10% 2 1.25 1 0.7mm 0.3mm min.

GR731AW0BB103KW01D 350Vdc - 10000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR721AW0BB153KW01D 350Vdc - 15000pF±10% 2 1.25 1 0.7mm 0.3mm min.

GR731AW0BB153KW01D 350Vdc - 15000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR721BW0BB223KW03L 350Vdc - 22000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GR731AW0BB223KW01D 350Vdc - 22000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR731BW0BB223KW01L 350Vdc - 22000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GR721BW0BB273KW03L 350Vdc - 27000pF±10% 2 1.25 1.45 0.7mm 0.3mm min.

GR731AW0BB273KW01D 350Vdc - 27000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR731AW0BB333KW01D 350Vdc - 33000pF±10% 3.2 1.6 1 1.2mm 0.3mm min.

GR731BW0BB333KW01L 350Vdc - 33000pF±10% 3.2 1.6 1.25 1.2mm 0.3mm min.

GR731CW0BB473KW03L 350Vdc - 47000pF±10% 3.2 1.6 1.8 1.2mm 0.3mm min.

For Camera Flash Circuit GR7 Series

Chip Monolithic Ceramic Capacitors (Medium Voltage)

C02E.pdf

Oct.1,2012

165

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR7 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR7 Series Speciﬁ cations and Test Methods

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

10N, 10±1s

Glass Epoxy Board

Solder resist

Glass Epoxy Board

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. 0.025 max.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 1

9Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

The capacitance measurement should be made at each step

specified in the Table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

Within ±10% (Apply DC350V bias)

Within

W22

Y33

% (No DC bias)

(Temp. Range : –55 to +125°C)

7Dissipation

Factor (D.F.) 0.025 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC250±50V

and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

No failure should be observed when DC500V is applied between

the terminations for 1 to 5 sec., provided the charge/discharge

current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

C02E.pdf

Oct.1,2012

166

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR7 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR7 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

s0RETREATMENT

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Humidity

(Steady

State)

Appearance

No marking defects

Capacitance

Change

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Fig. 4

Temperature

Cycle

Appearance

No marking defects

Capacitance

Change

Within ±7.5%

D.F. 0.025 max.

I.R. CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Preheat the capacitor at 120 to 150°C for 1 min.

Immerse the capacitor in solder solution at 260±5°C for 10±1

sec. Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`: 25±2.5mm/s

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

,iÃÃÌ>ViÊ

to Soldering

Heat

Appearance

No marking defects

Capacitance

Change

Within ±10%

D.F. 0.025 max.

I.R. CU0.01μF: More than 100MΩs&

CF0.01μF: More than 10,000MΩ

Dielectric

Strength

In accordance with item No.4

Solder resist

Glass Epoxy Board

100

ø4.5

t : 1.6

Capacitance meter

Flexure=1

(in mm)

20 50

R230

45 45

Pressurizing

speed: 1.0mm/s

Pressurize

Step Temperature (°C)

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

Time (min.)

30±3

2 to 3

30±3

2 to 3

LZW

(mm) a

iÃÊ®

1.2

2.2

4.0

5.0

1.65

2.0

1.0

2.0Z1.25

3.2Z1.6

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

12 Solderability of

Termination 75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

Fig. 3

11 Deflection

No marking defects

Fig. 2

No. /iÃÌÊiÌ`-«iVvV>ÌÃItem

C02E.pdf

Oct.1,2012

167

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR7 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GR7 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply the rated voltage at 40±2°C and relative humidity of 90 to

95% for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

>`}Ê

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Apply DC350V for 1,000

W48

Y 0

hrs. at maximum operating

temperature ±3°C. Remove and let sit for 24±2 hrs. at room

condition,* then measure.

The charge/discharge current is less than 50mA.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

16 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. CU0.01μF: More than 10MΩs&

CF0.01μF: More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

No. /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

168

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

GR7 Series

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. Chip monolithic ceramic capacitor for AC lines.

2. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels.

3. Sn-plated external electrodes realize good

solderability.

4. Only for reﬂ ow soldering

5. Capacitance 0.01 to 0.1uF for connecting lines and

470 to 4700pF for connecting lines to earth.

c Applications

Noise suppression ﬁ lters for switching power supplies,

telephones, facsimiles, modems.

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

c Reference Standard

GA2 series obtains no safety approval.

This series is based on the standards of the

electrical appliance and material safety law of Japan

(separated table 4).

Part Number LW T

Dimensions (mm)

g min.e min.

2.0 ±0.2

GA242Q

2.5

3.2

0.3

4.5 ±0.3 1.5 +0, -0.3

3.2 ±0.3

GA243D 4.5 ±0.4 2.0 +0, -0.3

GA243Q 1.5 +0, -0.3

5.0 ±0.4GA255D 5.7 ±0.4 2.0 +0, -0.3

e eg

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GA242QR7E2471MW01L 250Vac(r.m.s.) X7R (EIA) 470pF±20% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA242QR7E2102MW01L 250Vac(r.m.s.) X7R (EIA) 1000pF±20% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA243QR7E2222MW01L 250Vac(r.m.s.) X7R (EIA) 2200pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min.

GA243QR7E2332MW01L 250Vac(r.m.s.) X7R (EIA) 3300pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min.

GA243DR7E2472MW01L 250Vac(r.m.s.) X7R (EIA) 4700pF±20% 4.5 3.2 2 2.5mm 0.3mm min.

GA243QR7E2103MW01L 250Vac(r.m.s.) X7R (EIA) 10000pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min.

GA243QR7E2223MW01L 250Vac(r.m.s.) X7R (EIA) 22000pF±20% 4.5 3.2 1.5 2.5mm 0.3mm min.

GA243DR7E2473MW01L 250Vac(r.m.s.) X7R (EIA) 47000pF±20% 4.5 3.2 2 2.5mm 0.3mm min.

GA255DR7E2104MW01L 250Vac(r.m.s.) X7R (EIA) 0.10µF±20% 5.7 5.0 2 3.2mm 0.3mm min.

AC250V Type (Which Meet Japanese Law) GA2 Series

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

169

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GA2 Series Speciﬁ cations and Test Methods

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. 0.025 max.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow. The soldering

should be done using the reflow method and should be

conducted with care so that the soldering is uniform and free of

defects such as heat shock.

Fig. 1

10 Adhesive Strength

of Termination No removal of the terminations or other defects should occur.

As in Fig., discharge is made 50 times at 5 sec. intervals from

the capacitor (Cd) charged at DC voltage of specified.

Ct: Capacitor under test Cd: 0.001μF

R1: 1,000Ω R2: 100MΩ R3: Surge resistance

Discharge

Test

(Application:

Nominal

Capacitance

CF10,000pF)

Appearance

No defects or abnormalities

The capacitance measurement should be made at each step

specified in the Table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

Within ±15%

(Temp. Range: –55 to +125°C)

7Dissipation

Factor (D.F.) 0.025 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V (r.m.s.).

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

More than 2,000MΩ

No failure should be observed when voltage in the table is

applied between the terminations for 60±1 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

Nominal Capacitance Test Voltage

AC575V (r.m.s.)

AC1500V (r.m.s.)

CU10,000pF

CF10,000pF

Step Temperature (°C)

25±2

Min. Operating Temp.±3

25±2

Max. Operating Temp.±2

25±2

10N, 10±1s

Glass Epoxy Board

Solder resist

Glass Epoxy Board

R3 R1

10kV V

C02E.pdf

Oct.1,2012

170

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GA2 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. More than 2,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Preheat the capacitor as in table.

Immerse the capacitor in solder solution at 260±5°C for 10±1

sec. Let sit at room condition* for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`: 25±2.5mm/s

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

**Àii>Ì}

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. 0.025 max.

I.R. More than 2,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

The capacitor should be subjected to 40±2°C, relative humidity of

90 to 98% for 8 hrs., and then removed in room condition* for 16

hrs. until 5 cycles.

Õ`ÌÞ

ÃÕ>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

13 -`iÀ>LÌÞÊvÊ

/iÀ>Ì 75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3. The soldering

should be done using the reflow method and should be

conducted with care so that the soldering is uniform and free of

defects such as heat shock.

Fig. 3

12 iviVÌ

No marking defects

Fig. 2

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

LZW

® >

iÃÊ®

3.5

4.5

7.0

8.0

2.4

3.7

5.6

1.0

4.5Z2.0

4.5Z3.2

5.7Z5.0

-Ìi« /i«iÀ>ÌÕÀi

100 to 120°C

170 to 200°C

/i

1 min.

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

Solder resist

Glass Epoxy Board

100

ø4.5

t : 1.6

Capacitance meter

Flexure=1

(in mm)

20 50

R230

45 45

Pressurizing

speed: 1.0mm/s

Pressurize

C02E.pdf

Oct.1,2012

171

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GA2 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply the rated voltage at 40±2°C and relative humidity of 90 to

95% for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

Õ`ÌÞ

>`}

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Apply voltage and time as in Table at maximum operating

temperature ±3°C. Remove and let sit for 24±2 hrs. at room

condition,* then measure. The charge / discharge current is

less than 50mA.

* Except that once each hour the voltage is increased to

AC1,000V (r.m.s.) for 0.1 sec.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5 min. at test temperature.

Remove and let sit for 24±2 hrs. at room condition.*

18 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±20%

D.F. 0.05 max.

I.R. More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

-Ìi>`ÞÊ

Ê-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F. 0.05 max.

I.R. More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

No. /iÃÌÊiÌ`-«iVvV>ÌÃÌi

>Ê>«>VÌ>Vi /iÃÌÊ/i

1,000

W48

Y 0

hrs.

1,500

W48

Y 0

hrs.

/iÃÌÊ6Ì>}i

AC300V (r.m.s.)

AC500V (r.m.s.) *

CU10,000pF

CF10,000pF

C02E.pdf

Oct.1,2012

172

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

c Features

1. Chip monolithic ceramic capacitor (certiﬁ ed as

conforming to safety standards) for AC lines.

2. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels.

3. Compared to lead type capacitors, this new

capacitor is greatly downsized and low-proﬁ led to

1/10 or less in volume, and 1/4 or less in height.

4. Type GC can be used as an X1-class and Y2-class

capacitor, line-by-pass capacitor of UL1414.

5. +125 degree C guaranteed

6. Only for reﬂ ow soldering

c Applications

1. Ideal for use as Y capacitor or X capacitor for

various switching power supplies

2. Ideal for modem applications

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LTW

Dimensions (mm)

g min.e min.

2.0 ±0.3

GA355D 5.7 ±0.4 4.00.35.0 ±0.4

e eg

Safety Standard Certiﬁ ed GA3 Series UL, IEC60384-14 Class X1/Y2 Type GC

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

173

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Standard No. Rated VoltageClass

Line By-passUL

VDE

BSI

SEMKO

ESTI

UL1414

IEC 60384-14

EN 60384-14

EN 60065 (14.2)

IEC 60384-14

EN 60384-14

IEC 60384-14

EN 60384-14

IEC 60384-14

AC250V

(r.m.s.)

X1, Y2

c Standard Certiﬁ cation

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GA355DR7GC101KY02L 250Vac(r.m.s.) X7R (EIA) 100pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min.

GA355DR7GC151KY02L 250Vac(r.m.s.) X7R (EIA) 150pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min.

GA355DR7GC221KY02L 250Vac(r.m.s.) X7R (EIA) 220pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min.

GA355DR7GC331KY02L 250Vac(r.m.s.) X7R (EIA) 330pF±10% 5.7 5.0 2.3 4.0mm 0.3mm min.

c Features

1. Available for equipment based on IEC/EN60950

and UL1950. Besides, the GA352/355 types are

available for equipment based on IEC/EN60065,

UL1492, and UL6500.

2. Type GF can be used as a Y2-class capacitor.

3. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels.

4. +125 degree C guaranteed

5. Only for reﬂ ow soldering

c Applications

1. Ideal for use on line ﬁ lters and couplings for

DAA modems without transformers

2. Ideal for use on line ﬁ lters for information

equipment

3. Ideal for use as Y capacitor or X capacitor for

various switching power supplies (GA352/355 types

only)

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LTW

Dimensions (mm)

g min.e min.

1.0 +0, -0.3

2.0 ±0.2

1.5 +0, -0.3

GA342A

GA342D

GA342Q

GA352Q

GA355D

GA355Q

4.5 ±0.3 2.5

4.0

0.3

2.0 ±0.2

5.7 ±0.4

2.8 ±0.3

5.0 ±0.4

1.5 +0, -0.3

2.0 +0, -0.3

1.5 +0, -0.3

e eg

Continued on the following page.

Safety Standard Certiﬁ ed GA3 Series IEC60384-14 Class Y2, X1/Y2 Type GF

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

174

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

–

VDE

SEMKO

Status of Certification Rated

Voltage

Standard

No.

Applications

Class

UL1414

UL 60950-1

IEC 60384-14

EN 60384-14

X1, Y2

–

X1, Y2

AC250V

(r.m.s.)

Size : 4.5x2.0mm Size : 5.7x2.8mm

and over

Communication

network devices

such as a modem

Size Switching power

supplies

4.5x2.0mm

5.7x2.8mm and over

c Standard Certiﬁ cation

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GA342D1XGF100JY02L 250Vac(r.m.s.) SL (JIS) 10pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGF120JY02L 250Vac(r.m.s.) SL (JIS) 12pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGF150JY02L 250Vac(r.m.s.) SL (JIS) 15pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGF180JY02L 250Vac(r.m.s.) SL (JIS) 18pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGF220JY02L 250Vac(r.m.s.) SL (JIS) 22pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342A1XGF270JW31L 250Vac(r.m.s.) SL (JIS) 27pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGF330JW31L 250Vac(r.m.s.) SL (JIS) 33pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGF390JW31L 250Vac(r.m.s.) SL (JIS) 39pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGF470JW31L 250Vac(r.m.s.) SL (JIS) 47pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGF560JW31L 250Vac(r.m.s.) SL (JIS) 56pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGF680JW31L 250Vac(r.m.s.) SL (JIS) 68pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGF820JW31L 250Vac(r.m.s.) SL (JIS) 82pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342QR7GF101KW01L 250Vac(r.m.s.) X7R (EIA) 100pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GF151KW01L 250Vac(r.m.s.) X7R (EIA) 150pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342DR7GF221KW02L 250Vac(r.m.s.) X7R (EIA) 220pF±10% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342DR7GF331KW02L 250Vac(r.m.s.) X7R (EIA) 330pF±10% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342QR7GF471KW01L 250Vac(r.m.s.) X7R (EIA) 470pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA352QR7GF471KW01L 250Vac(r.m.s.) X7R (EIA) 470pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min.

GA342QR7GF681KW01L 250Vac(r.m.s.) X7R (EIA) 680pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA352QR7GF681KW01L 250Vac(r.m.s.) X7R (EIA) 680pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min.

GA342DR7GF102KW02L 250Vac(r.m.s.) X7R (EIA) 1000pF±10% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA352QR7GF102KW01L 250Vac(r.m.s.) X7R (EIA) 1000pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min.

Continued from the preceding page.

C02E.pdf

Oct.1,2012

175

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GA352QR7GF152KW01L 250Vac(r.m.s.) X7R (EIA) 1500pF±10% 5.7 2.8 1.5 4.0mm 0.3mm min.

GA355QR7GF182KW01L 250Vac(r.m.s.) X7R (EIA) 1800pF±10% 5.7 5.0 1.5 4.0mm 0.3mm min.

GA355QR7GF222KW01L 250Vac(r.m.s.) X7R (EIA) 2200pF±10% 5.7 5.0 1.5 4.0mm 0.3mm min.

GA355QR7GF332KW01L 250Vac(r.m.s.) X7R (EIA) 3300pF±10% 5.7 5.0 1.5 4.0mm 0.3mm min.

GA355DR7GF472KW01L 250Vac(r.m.s.) X7R (EIA) 4700pF±10% 5.7 5.0 2 4.0mm 0.3mm min.

c Features

1. Available for equipment based on IEC/EN60950

and UL1950.

2. Type GD can be used as a Y3-class capacitor.

3. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels.

4. +125 degree C guaranteed

5. Only for reﬂ ow soldering

c Applications

1. Ideal for use on line ﬁ lters and couplings for

DAA modems without transformers

2. Ideal for use on line ﬁ lters for information

equipment

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LTW

Dimensions (mm)

g min.e min.

2.0 ±0.2

1.0 +0, -0.3

GA342A

GA342D

GA342Q

GA343D

GA343Q

4.5 ±0.3

2.5

0.3

2.0 ±0.2

4.5 ±0.4 3.2 ±0.3

1.5 +0, -0.3

2.0 +0, -0.3

1.5 +0, -0.3

e eg

Safety Standard Certiﬁ ed GA3 Series IEC60384-14 Class Y3 Type GD

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

176

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

SEMKO

Rated VoltageStandard No. Class

UL 60950-1

IEC 60384-14

EN 60384-14

–

Y3 AC250V(r.m.s.)

Applications

Communication

network devices

such as a modem

Size Switching power

supplies

4.5x3.2mm and under –

c Standard Certiﬁ cation

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GA342D1XGD100JY02L 250Vac(r.m.s.) SL (JIS) 10pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGD120JY02L 250Vac(r.m.s.) SL (JIS) 12pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGD150JY02L 250Vac(r.m.s.) SL (JIS) 15pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGD180JY02L 250Vac(r.m.s.) SL (JIS) 18pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342D1XGD220JY02L 250Vac(r.m.s.) SL (JIS) 22pF±5% 4.5 2.0 2.2 2.5mm 0.3mm min.

GA342A1XGD270JW31L 250Vac(r.m.s.) SL (JIS) 27pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGD330JW31L 250Vac(r.m.s.) SL (JIS) 33pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGD390JW31L 250Vac(r.m.s.) SL (JIS) 39pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGD470JW31L 250Vac(r.m.s.) SL (JIS) 47pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGD560JW31L 250Vac(r.m.s.) SL (JIS) 56pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGD680JW31L 250Vac(r.m.s.) SL (JIS) 68pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342A1XGD820JW31L 250Vac(r.m.s.) SL (JIS) 82pF±5% 4.5 2.0 1 2.5mm 0.3mm min.

GA342QR7GD101KW01L 250Vac(r.m.s.) X7R (EIA) 100pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD151KW01L 250Vac(r.m.s.) X7R (EIA) 150pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD221KW01L 250Vac(r.m.s.) X7R (EIA) 220pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD331KW01L 250Vac(r.m.s.) X7R (EIA) 330pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD471KW01L 250Vac(r.m.s.) X7R (EIA) 470pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD681KW01L 250Vac(r.m.s.) X7R (EIA) 680pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD102KW01L 250Vac(r.m.s.) X7R (EIA) 1000pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA342QR7GD152KW01L 250Vac(r.m.s.) X7R (EIA) 1500pF±10% 4.5 2.0 1.5 2.5mm 0.3mm min.

GA343QR7GD182KW01L 250Vac(r.m.s.) X7R (EIA) 1800pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GA343QR7GD222KW01L 250Vac(r.m.s.) X7R (EIA) 2200pF±10% 4.5 3.2 1.5 2.5mm 0.3mm min.

GA343DR7GD472KW01L 250Vac(r.m.s.) X7R (EIA) 4700pF±10% 4.5 3.2 2 2.5mm 0.3mm min.

c Features

1. Type GB can be used as an X2-class capacitor.

2. Chip monolithic ceramic capacitor (certiﬁ ed as

conforming to safety standards) for AC lines.

3. A new monolithic structure for small, high

capacitance capable of operating at high voltage

levels.

4. Compared to lead type capacitors, this new

capacitor is greatly downsized and low-proﬁ led to

1/10 or less in volume, and 1/4 or less in height.

5. +125 degree C guaranteed

6. Only for reﬂ ow soldering

c Applications

Ideal for use as X capacitor for various switching

power supplies

Do not use these products in any Automotive

Power train or Safety equipment including Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

applications such as Power train and Safety equipment.

Part Number LTW

Dimensions (mm)

g min.e min.

1.5 +0,-0.3

GA355D 5.7 ±0.4 3.00.35.0 ±0.4 2.0 +0,-0.3

2.5 +0,-0.3

2.9 +0,-0.4

GA355X

GA355Q

GA355E

e eg

Safety Standard Certiﬁ ed GA3 Series IEC60384-14 Class X2 Type GB

Chip Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

177

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Standard No. Rated VoltageClass

VDE

SEMKO

ESTI

IEC 60384-14

EN 60384-14

IEC 60384-14

AC250V

(r.m.s.)

c Standard Certiﬁ cation

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Electrode g

min. Electrode e

GA355QR7GB103KW01L 250Vac(r.m.s.) X7R (EIA) 10000pF±10% 5.7 5.0 1.5 3.0mm 0.3mm min.

GA355QR7GB153KW01L 250Vac(r.m.s.) X7R (EIA) 15000pF±10% 5.7 5.0 1.5 3.0mm 0.3mm min.

GA355DR7GB223KW01L 250Vac(r.m.s.) X7R (EIA) 22000pF±10% 5.7 5.0 2 3.0mm 0.3mm min.

GA355ER7GB333KW01L 250Vac(r.m.s.) X7R (EIA) 33000pF±10% 5.7 5.0 2.5 3.0mm 0.3mm min.

GA355ER7GB473KW01L 250Vac(r.m.s.) X7R (EIA) 47000pF±10% 5.7 5.0 2.5 3.0mm 0.3mm min.

GA355XR7GB563KW06L 250Vac(r.m.s.) X7R (EIA) 56000pF±10% 5.7 5.0 2.9 3.0mm 0.3mm min.

GA3 Series Speciﬁ cations and Test Methods

Continued on the following page.

*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

*2 "C" expresses nominal capacitance value (pF).

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow. The soldering

should be done using the reflow method and should be

conducted with care so that the soldering is uniform and free of

defects such as heat shock.

Fig. 1

11 Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

As in Fig., discharge is made 50 times at 5 sec. intervals from

the capacitor (Cd) charged at DC voltage of specified.

Ct: Capacitor under test Cd: 0.001μF

R1: 1,000Ω R2: 100MΩ R3: Surge resistance

Discharge

Test

(Application:

Type GC)

Appearance

No defects or abnormalities

I.R. More than 1,000MΩ

Dielectric

Strength

In accordance with item No.4

The capacitance measurement should be made at each step

specified in the Table.

SL char. :

The capacitance should be measured at even 85°C between

step 3 and step 4.

U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV>À°

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*1

Capacitance

Temperature

Characteristics

Temperature characteristic guarantee is –55 to +125°C

Temperature characteristic guarantee is +20 to +85°C

Dissipation

Factor (D.F.)

The capacitance/Q/D.F. should be measured at a frequency of

1±0.2kHz (SL char.: 1±0.2MHz) and a voltage of

AC1±0.2V (r.m.s.).

ÇCapacitance Within the specified tolerance

The insulation resistance should be measured with DC500±50V

and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

More than 6,000MΩ

10 impulses of alternating polarity are subjected.

(5 impulses for each polarity)

The interval between impulses is 60 sec.

Applied Pulse: 1.2/50μs

Applied Voltage: 2.5kVo-p

*ÕÃiÊ6Ì>}i

(Application: Type

GD/GF)

No self healing breakdowns or flash-overs have taken place in

the capacitor.

No failure should be observed when voltage in the table is

applied between the terminations for 60±1 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

–

Operating

Temperature Range

–55 to +125°C

No. Test MethodSpecificationsItem

/iÃÌÊ6Ì>}i

DC1075V

AC1500V (r.m.s.)

AC2000V (r.m.s.)

Type GB

Type GC/GD

Type GF

Char. Specification

D.F.V0.025

QU400+20C*2 (CF30pF)

QU1000 (CU30pF)

X7R

Char. Capacitance Change

Within ±15%X7R

Char. Temperature Coefficient

+350 to –1000ppm/°CSL

Step Temperature (°C)

25±2 (20±2 for SL char.)

Min. Operating Temp.±3

25±2 (20±2 for SL char.)

Max. Operating Temp.±2

25±2 (20±2 for SL char.)

10N, 10±1s

Glass Epoxy Board

R3 R1

10kV V

C02E.pdf

Oct.1,2012

178

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GA3 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

*2 "C" expresses nominal capacitance value (pF).

Preheat the capacitor as in table. Immerse the capacitor in

solder solution at 260±5°C for 10±1 sec. Let sit at room

condition*1 for 24±2 hrs., then measure.

UiÀÃ}ÊÃ«ii`: 25±2.5mm/s

U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV>À°

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*1

**Àii>Ì}

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

°,° More than 1,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Immerse the capacitor in a solution of ethanol (JIS-K-8101) and

rosin (JIS-K-5902) (25% rosin in weight proportion).

Immerse in solder solution for 2±0.5 sec.

Immersing speed: 25±2.5mm/s

Temp. of solder: 245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

14 -`iÀ>LÌÞÊvÊ

/iÀ>Ì 75% of the terminations are to be soldered evenly and continuously.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3. The soldering

should be done using the reflow method and should be

conducted with care so that the soldering is uniform and free of

defects such as heat shock.

Fig. 3

13 iviVÌ

No marking defects

Fig. 2

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz. The

frequency range, from 10 to 55Hz and return to 10Hz, should be

traversed in approximately 1 min. This motion should be applied

for a period of 2 hrs. in each of 3 mutually perpendicular

directions (total of 6 hrs.).

6LÀ>ÌÊ

,iÃÃÌ>Vi

««i>À>Vi

No defects or abnormalities

>«>VÌ>Vi

Within the specified tolerance

°°

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

>À° -«iVvV>Ì

D.F.V0.025

QU400+20C*2 (CF30pF)

QU1000 (CU30pF)

X7R

LZW

® >

iÃÊ®

3.5

4.5

7.0

8.0

2.4

3.7

3.2

5.6

1.0

4.5Z2.0

4.5Z3.2

5.7Z2.8

5.7Z5.0

>À° >«>VÌ>ViÊ>}i

Within ±10%

Within ±2.5% or ±0.25pF

(Whichever is larger)

X7R

-Ìi« /i«iÀ>ÌÕÀi

100 to 120°C

170 to 200°C

/i

1 min.

Solder resist

Glass Epoxy Board

100

ø4.5

t : 1.6

Capacitance meter

Flexure=1

20 50

R230

45 45 (in mm)

Pressurizing

speed: 1.0mm/s

Pressurize

C02E.pdf

Oct.1,2012

179

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GA3 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

Continued on the following page.

*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

*2 "C" expresses nominal capacitance value (pF).

Before this test, the test shown in the following is performed.

·Item 11 Adhesive Strength of Termination (apply force is 5N)

·Item 13 Deflection

Impulse Voltage

Each individual capacitor should

be subjected to a 2.5kV (Type

GC/GF: 5kV) Impulse (the

voltage value means zero to

peak) for three times. Then the

capacitors are applied to life test.

Apply voltage as in Table for 1,000 hrs. at 125

°C, relative

humidity 50% max.

Let sit for 24±2 hrs. at room condition,*1 then measure.

U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV>À°

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*1

18 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

°°

°,° More than 3,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

>À° >«>VÌ>ViÊ>}i

Within ±20%

Within ±3.0% or ±0.3pF

(Whichever is larger)

X7R

>À° -«iVvV>Ì

D.F.V0.05

QU275+5/2C*2 (CF30pF)

QU350 (CU30pF)

X7R

Before this test, the test shown in the following is performed.

·Item 11 Adhesive Strength of Termination (applied force is 5N)

·Item 13 Deflection

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500

W24

Y 0

hrs.

Remove and let sit for 24±2 hrs. at room condition,*1 then

measure.

U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV>À°

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*1

£Ç

Õ`ÌÞÊ

-Ìi>`ÞÊ

Ê-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

°°

°,° More than 3,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

>À° >«>VÌ>ViÊ>}i

Within ±15%

Within ±5.0% or ±0.5pF

(Whichever is larger)

X7R

>À° -«iVvV>Ì

D.F.V0.05

QU275+5/2C*2 (CF30pF)

QU350 (CU30pF)

X7R

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 5 cycles according to the 4 heat treatments listed in

the following table.

Let sit for 24±2 hrs. at room condition,*1 then measure.

U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV>À°

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*1

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

°°

°,° More than 3,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

>À° >«>VÌ>ViÊ>}i

Within ±15%

Within ±2.5% or ±0.25pF

(Whichever is larger)

X7R

>À° -«iVvV>Ì

D.F.V0.05

QU400+20C*2 (CF30pF)

QU1000 (CU30pF)

X7R

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp.±3

Room Temp.

Max. Operating Temp.±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

/Þ«i ««i`Ê6Ì>}i

AC312.5V (r.m.s.), except that once each hour the

voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.

AC425V (r.m.s.), except that once each hour the

voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.



Solder resist

Glass Epoxy Board

Front time (T1)

1.2μs=1.67T

Time to half-value (T2)

50μs

(%)

100

C02E.pdf

Oct.1,2012

180

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GA3 Series Speciﬁ cations and Test Methods

Continued from the preceding page.

*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

*2 "C" expresses nominal capacitance value (pF).

The capacitor under test should be held in the flame in the

position which best promotes burning. Each specimen should

be exposed to the flame only once. Time of exposure to flame:

30 sec.

Length of flame : 12±1mm

Gas burner : Length 35mm min.

Inside Dia. 0.5±0.1mm

Outside Dia. 0.9mm max.

Gas : Butane gas Purity 95% min.

21 Passive

Flammability

The burning time should not exceed 30 sec.

The tissue paper should not ignite.

The capacitor should be individually wrapped in at least one but

not more than two complete layers of cheesecloth. The

capacitor should be subjected to 20 discharges. The interval

between successive discharges should be 5 sec. The UAC

should be maintained for 2 min. after the last discharge.

C1,2 : 1μF±10% C3 : 0.033μF±5% 10kV

L1 to 4 : 1.5mH±20% 16A Rod core choke

Ct : 3μF±5% 10kV R : 100Ω±2%

Cx : Capacitor under test UAC : UR±5%

F : Fuse, Rated 16A UR : Rated Voltage

t : Voltage applied to Ct

20 Active

Flammability The cheesecloth should not be on fire.

Before this test, the test shown in the following is performed.

·Item 11 Adhesive Strength of Termination (apply force is 5N)

·Item 13 Deflection

Apply the rated voltage at 40±2°C and relative humidity of 90 to

95% for 500

W24

Y 0

hrs. Remove and let sit for 24±2 hrs. at room

condition,*1 then measure.

U*ÀiÌÀi>ÌiÌÊvÀÊ8Ç,ÊV>À°

Perform a heat treatment at 150

W 0

Y10

°C for 60±5 min. and then

let sit for 24±2 hrs. at room condition.*1

Humidity

>`}

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

°°

°,° More than 3,000MΩ

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

° /iÃÌÊiÌ`-«iVvV>ÌÃItem

>À° >«>VÌ>ViÊ>}i

Within ±15%

Within ±5.0% or ±0.5pF

(Whichever is larger)

X7R

>À° -«iVvV>Ì

D.F.V0.05

QU275+5/2C*2 (CF30pF)

QU350 (CU30pF)

X7R

Type Ui

2.5kV

5kV

GD, GB

GC, GF

CtCxC3C2

L2R

UAC

Oscilloscope

time

About 8mm

200±5mm

Test Specimen

Tissue

About 10mm Thick Board

45°

C02E.pdf

Oct.1,2012

181

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)

Cap. Change (%)

Temperature (°C)

–20

–60 –40 –20 0 20 40 60 80 100 120 140

–15

–10

–5

C0G

U2J

c Capacitance - Temperature Characteristics

C0G/U2J/SL Characteristics

-30

-20

-10

-60 -40 -20 0 20 40 60 80 100 120 140

Temperature (°C)

Cap. Change (%)

X7R Char. Spec.(upper)

X7R Char. Spec.(lower)

X7R Characteristics

Cap. Change (%)

Temperature (°C)

–20

–60 –40 –20 0 20 40 60 80 100 120 140

–15

–10

-5

GR4 Series

Cap. Change (%)

Temperature (°C)

–30

–20

–60 –40 –20 0 20 40 60 80 100 120 140

–10

X7T Characteristics

10k

100

100m

1M 10M 100M 10G1G

Frequency (Hz)

Z (Ω)

10pF

100pF

47pF

22pF

c Impedance - Frequency Characteristics

GRM Series (C0G Char. 250V)

10k

100k

100

100m

1M 10M 100M 10G1G

Frequency (Hz)

Z (Ω)

100pF

1000pF

470pF

47pF 10pF

GRM Series (C0G Char. 630V)

Continued on the following page.

C02E.pdf

Oct.1,2012

182

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Reference Data

GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)

Continued from the preceding page.

100m

100

10k

10pF

47pF

100pF

22pF

100k

1M 10M 100M 1G 10G

Frequency (Hz)

Z (Ω)

c Impedance - Frequency Characteristics

GRM Series (C0G Char. 1kV)

100

100m

10m

1M 10M 100M 1G

Frequency (Hz)

Z (Ω)

1000pF

10000pF

100000pF

GRM Series (X7R Char. 250V)

100

100m

10m

1M 10M 100M 1G

Frequency (Hz)

Z (Ω)

1000pF

10000pF

100000pF

GRM Series (X7R Char. 630V)

0.01

0.1

100

1M 10M 100M 1G

Frequency (Hz)

(1) GRJ21AR72E102KWJ1D

(2) GRJ21BR72E103KWJ3L

(3) GRJ31BR72E223KWJ1L

(4) GRJ31CR72E473KWJ3L

(5) GRJ31CR72E104KWJ3L

(6) GRJ55DR72E105KWJ1L

Z (Ω)

(3)

(4)

(5)

(6)

(2)

(1)

GRJ Series (X7R Char. 250V)

0.01

0.1

100

1M 10M 100M 1G

Frequency (Hz)

(1) GR321AD72E103KW01D

(2) GR332QD72E104KW01L

(3) GR355XD72E105KW05L

Z (Ω)

(3)

(2)

(1)

GR3 Series (X7T Char. 250V)

100

100m

10m

1M 10M 100M 1G

Frequency (Hz)

Z (Ω)

100pF

1000pF

4700pF

GR4 Series

Z (Ω)

Frequency (Hz)

10m

1M 10M 100M 1G

100

100m

10000pF

1000pF

100000pF

GA2 Series

100

100m

10m

1M 10M 100M 1G

Frequency (Hz)

Z (Ω)

1000pF

2200pF

GA3 Series (Type GF)

Continued on the following page.

C02E.pdf

Oct.1,2012

183

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Reference Data

GRM/GRJ/GR3/GR4/GR7/GA2/GA3 Series Reference Data (Typical Example)

Continued from the preceding page.

100

100m

10m

1M 10M 100M 1G

Frequency (Hz)

Z (Ω)

150pF

1000pF

2200pF

c Impedance - Frequency Characteristics

GA3 Series (Type GD)

0.01

0.1

100

1M 10M 100M 1G

Frequency (Hz)

Z (Ω)

33000pF

10000pF

56000pF

GA3 Series (Type GB)

-60

-40

-20

0500 1000 1500 2000

AC Voltage [V(r.m.s.)]

Cap. Change (%)

at Room Condition (25°C)

c Capacitance - AC Voltage Characteristics

GA3 Series (Type GF/GD, X7R Char.)

at Room Condition (25°C)

-60

-40

-20

050

100 150 200 250 300

AC Voltage [V(r.m.s.)]

Cap. Change (%)

10000pF

33000pF

56000pF

GA3 Series (Type GB)

-100

-80

-60

-40

-20

0 50 100 150 200 250

DC Bias (V)

(2)

(1)

Cap. Change (%)

(1) GRM55DR72E105KW01L

(2) GR355XD72E105KW05L

c Capacitance - DC Bias Characteristics

GRM/GR3 Series

GR721AW0BB103KW01D

GR721AW0BB153KW01D

GR721BW0BB223KW03L

GR731AW0BB223KW01D

GR721BW0BB273KW03L

GR731AW0BB273KW01D

GR731AW0BB333KW01D

GR731AW0BB103KW01D

GR731AW0BB153KW01D

GR731BW0BB223KW01L

GR731BW0BB333KW01L

GR731CW0BB473KW03L

-100

-80

-60

-40

-20

0 50 100 150 200 250 300 350

DC Bias (V)

(1)

(2)

(1)

Cap. Change (%)

GR7 Series

C02E.pdf

Oct.1,2012

184

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Reference Data

Package

Taping is the standard packaging method.

Part Number Dimensions (mm)

ø180mm Reel

Paper Tape Embossed Tape

Quantity (pcs.)

250Vdc min.

For General Purpose &

Only for Applications

AC250V

Safety Std.

Certification

GRM18

GRJ21/GRM21/GR321/

GR721

GRJ31/GRM31/GR331/

GR731

GRJ32/GRM32/GR332

GRM42/GR442

GRJ43/GRM43/GR343/

GR443

GRM55

GRJ55/GRM55/GR355/

GR455

GR355

GA242

GA243

GA255

GA342

GA343

GA352

GA355

1.6

2.0

3.2

4.5

5.7

4.5

5.7

4.5

5.7

0.8

1.25

1.6

2.5

2.0

3.2

5.0

2.0

3.2

5.0

2.0

3.2

2.8

5.0

0.8

1.0

1.25

1.0

1.25

1.6

1.0

1.25

1.5

2.0

1.0

1.5

2.0

2.5

1.5

2.0

2.7

1.5

2.0

1.0

1.5

2.0

1.5

2.0

1.5

2.0

2.5

2.7

2.9

4,000

3,000

2,000

3,000

2,000

1,000

3,000

2,000

1,000

500

1,000

500

2,000

1,000

3,000

2,000

1,000

500

c Minimum Quantity Guide

Continued on the following page.

C02E.pdf

Oct.1,2012

185

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Package

(2) Dimensions of Tape

q Embossed Tape

w Paper Tape

8mm width, 4mm pitch Tape

12mm width, 8mm/4mm pitch Tape

A*Part Number A*Part NumberB*

GRJ21/GRM21/GR321/GR721

(TU1.25mm) 1.45 2.25

GRJ31/GRM31/GR331/GR731

(TU1.25mm) 2.0 3.6

GRJ32/GRM32/GR332

(TU1.25mm) 2.9 3.6

2.5 5.1

3.6 4.9

3.2 6.1

GRM42/GR442/GA242/GA342

GRJ43/GRM43/GR343/GR443/GA243/GA343

GA352

GRJ55/GRM55/GR355/GR455/GA255/GA355

5.4

*1 4.0±0.1mm in case of GRM42/GR442/GA242/GA342

6.1

*Nominal Value

A*Part Number B*

GRJ21/GRM21/GR321/GR721

(T=1.0mm) 1.45 2.25

GRM18 1.05 1.85

GRM31/GR331/GR731

(T=1.0mm) 2.0 3.6

GRM32

(T=1.0mm) 2.9 3.6

*Nominal Value

(in mm)

4.0±0.1

4.0±0.05

1.75±0.1

8.0±0.3

Direction of Feed

2.0±0.05 0.25±0.1

2.5 max.

3.5±0.05

ø1.5W0.1

8.0±0.1*1

4.0±0.1

1.75±0.1

12.0±0.3

Direction of Feed

5.5±0.05

2.0±0.05 0.3±0.1

3.7 max.

ø1.5W0.1

4.0±0.1 ø1.5W0.1

4.0±0.1

1.75±0.1

1.1 max.

8.0±0.3

Direction of Feed

3.5±0.05

2.0±0.05

Continued from the preceding page.

Continued on the following page.

c Tape Carrier Packaging

(1) Appearance of Taping

q Embossed Tape w Paper Tape

Top Tape: 0.05mm in thickness

Sprocket Hole: As specified in (2)

Cavity for Chip: As specified in (2)

Base Tape: As specified in (2)

Bottom Tape: 0.05mm in thickness

ChipPacked ChipsChipPacked Chips

Cover Tape: 0.06mm in thickness

Sprocket Hole: As specified in (2)

Cavity for Chip: As specified in (2)

Base Tape: As specified in (2)

C02E.pdf

Oct.1,2012

186

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Package

(4) Taping Method

q Tapes for capacitors are wound clockwise. The

sprocket holes are to the right as the tape is pulled

toward the user.

w Part of the leader and part of the empty tape should be

attached to the end of the tape as shown at right.

e The top tape or cover tape and base tape are not

attached at the end of the tape for a minimum of 5

pitches.

r Missing capacitors number within 0.1% of the number

per reel or 1 pc, whichever is greater, and are not

continuous.

t The top tape or cover tape and bottom tape should not

protrude beyond the edges of the tape and should not

cover sprocket holes.

y Cumulative tolerance of sprocket holes, 10 pitches:

±0.3mm.

u Peeling off force: 0.1 to 0.6N in the direction shown at

right.

(in mm)

165 to 180°

Base Tape

Top Tape or Cover Tape

Direction of feed

160 min. 190 min.

(Top Tape or Cover Tape alone)

Vacant section Chip mounting unit Vacant section

210 min.

Continued from the preceding page.

(3) Dimensions of Reel

(in mm)

2.0±0.5

9.0 (Tape width 8mm)

13.0 (Tape width 12mm)

ø13±0.2

ø21±0.8

60 +1

1.5

180 +0

+1.0

13.0±1.0 (Tape width 8mm)

17.0±1.0 (Tape width 12mm)

C02E.pdf

Oct.1,2012

187

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Package

C02E.pdf

Oct.1,2012

188

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution/Notice

!Caution Notice

c Storage and Operation Conditions ........................ 189

c Rating .................................................................... 189

1. Operating Voltage.............................................. 189

2. Operating Temperature, Self-generated Heat,

and Load Reduction at High-frequency Voltage

Condition ........................................................... 189

3. Fail-safe............................................................. 191

4. Test Condition for AC Withstanding Voltage ..... 191

(1) Test Equipment............................................ 191

(2) Voltage Applied Method............................... 191

c Soldering and Mounting ........................................ 191

1. Vibration and Impact.......................................... 191

2. Circuit Board Material........................................ 191

3. Land Layout for Cropping PC Board ................. 191

4. Reflow Soldering ............................................... 192

5. Flow Soldering................................................... 193

6. Correction with a Soldering Iron ........................ 194

7. Washing............................................................. 194

8. Handling ............................................................ 194

c Rating .................................................................... 195

1. Capacitance Change of Capacitor..................... 195

2. Performance Check by Equipment.................... 195

c Soldering and Mounting ........................................ 195

1. Construction of Board Pattern ........................... 195

2. Mounting of Chips.............................................. 196

3. Soldering ........................................................... 197

(1) Limit of losing effective area of the

terminations and conditions needed

for soldering. ................................................ 197

(2) Flux Application............................................ 197

(3) Solder........................................................... 197

4. Cleaning ............................................................ 197

5. Resin Coating.................................................... 197

When DC-rated capacitors are to be used in AC or ripple

current circuits, be sure to maintain the Vp-p value of the

applied voltage or the Vo-p which contains DC bias within

the rated voltage range.

When the voltage is applied to the circuit, starting or

stopping may generate irregular voltage for a transit

period because of resonance or switching. Be sure to use

a capacitor with a rated voltage range that includes these

irregular voltages.

When DC-rated capacitors are to be used in input circuits

from a commercial power source (AC filter), be sure to

use Safety Certified Capacitors because various

regulations for withstanding voltage or impulses,

established for all equipment, should be taken into

consideration.

Voltage

Positional

Measurement

DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2)

V0-p V0-p Vp-p Vp-p Vp-p

1. Operating Voltage

2. Operating Temperature, Self-generated Heat, and Load Reduction at High-frequency Voltage Condition

Continued on the following page.

Keep the surface temperature of a capacitor below the

upper limit of its rated operating temperature range.

Be sure to take into account the heat generated by the

capacitor itself. When the capacitor is used in a high-

frequency voltage, pulse voltage, it may self-generate

heat due to dielectric loss.

Applied voltage should be the load such as self-

generated heat is within 20°C on the condition of

atmosphere temperature 25°C. When measuring, use a

thermocouple of small thermal capacity -K of ø0.1mm

in conditions where the capacitor is not affected by

radiant heat from other components or surrounding

ambient fluctuations. Excessive heat may lead to

deterioration of the capacitor's characteristics and

reliability. (Never attempt to perform measurement

with the cooling fan running. Otherwise, accurate

measurement cannot be ensured.)

(1) In the case of X7R, X7T char.

c Rating

Do not use or store capacitors in a corrosive

atmosphere, especially where chloride gas, sulfide

gas, acid, alkali, salt or the like are present. In

addition, avoid exposure to moisture. Before cleaning,

bonding or molding this product, verify that these

processes do not affect product quality by testing the

performance of a cleaned, bonded or molded product

in the intended equipment. Store the capacitors

where the temperature and relative humidity do not

exceed 5 to 40 degrees centigrade and 20 to 70%.

Use capacitors within 6 months of delivery.

Check the solderability after 6 months or more.

c Storage and Operation Conditions

C02E.pdf

Oct.1,2012

189

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution

Due to the low self-heating characteristics of

low-dissipation capacitors, the allowable electric power of

these capacitors is generally much higher than that of

X7R characteristic capacitors.

When a high frequency voltage that causes 20°C self-

heating to the capacitor is applied, it will exceed the

capacitor's allowable electric power.

The frequency of the applied sine wave voltage should be

less than 500kHz (less than 100kHz in the case of rated

voltage: DC3.15kV). The applied voltage should be less

than the value shown in figure below.

In the case of non-sine wave that includes a harmonic

frequency, please contact our sales representatives or

product engineers. Excessive heat may lead to

deterioration of the capacitor's characteristics and

reliability. (Never attempt to perform measurement with

the cooling fan running. Otherwise, accurate

measurement cannot be ensured.)

The capacitors less than 22pF can be applied maximum

4.0kV peak to peak at 100kHz or less only for the ballast

or the resonance usage in the LCD backlight inverter

circuit.

We are also offering free software/the capacitor selection

tool: "Murata Medium Voltage Capacitors Selection Tool

by Voltage Form," which will assist you in selecting a

suitable capacitor.

The software can be downloaded from Murata's Website.

(http://www.murata.com/designlib/mmcsv/index.html).

By inputting capacitance values and the applied voltage

waveform of the specific capacitor series, this software

will calculate the capacitor's power consumption and list

suitable capacitors (non-sine wave is also available).

(2) In case of C0G, U2J char.

C0G char., Rated Voltage: DC1kV

Frequency [kHz]

1000100101

100

(1000)

Allowable voltage [Vp-p]

10000

C0G char., Rated Voltage: DC3.15kV

Frequency [kHz]

1000100101

1000

(3150)

Allowable voltage [Vp-p]

10000

27 to 47pF

to 22pF

Continued from the preceding page.

The sine-wave frequency VS allowable voltage

The temperature of the surface

of capacitor: 125˚C or less (including self-heating)

U2J char., Rated Voltage: DC3.15kV

Frequency [kHz]

Allowable voltage [Vp-p]

1000100101

1000

(3150)

10000

to 33pF

47pF

100pF

100

1000

10000

U2J char., Rated Voltage: DC2kV

Allowable voltage [Vp-p]

Frequency [kHz]

1000(500)100101

to 100pF

150pF

220pF

U2J char., Rated Voltage: DC250V

Frequency [kHz]

1000(500)100101

100

(250)

Allowable voltage [Vp-p]

1000

to 4,700pF

10,000pF

Continued on the following page.

C0G char., Rated Voltage: DC250V

Frequency [kHz]

100

(250)

Allowable voltage [Vp-p]

1000

C0G char., Rated Voltage: DC630V

Frequency [kHz]

1000100101

100

(630)

Allowable voltage [Vp-p]

1000

1000100101

to 470pF

1000pF

680pF

560pF

820pF

to 100pF

U2J char., Rated Voltage: DC630V

Frequency [kHz]

1000100101

100

Allowable voltage [Vp-p]

1000

1,000pF

to 680pF

2,200pF

4,700pF

10,000pF

22,000pF

47,000pF

Frequency [kHz]

U2J char., Rated Voltage: DC1kV

1000100101

100

Allowable voltage [Vp-p]

10000

1000 1,000pF

to 470pF

10,000pF

4,700pF

2,200pF

C02E.pdf

Oct.1,2012

190

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution

(1) Test Equipment

Tests for AC withstanding voltage should be made with

equipment capable of creating a wave similar to a

50/60 Hz sine wave.

If the distorted sine wave or overload exceeding the

specified voltage value is applied, a defect may be

caused.

*ZERO CROSS is the point where voltage sine wave

passes 0V.

- See the figure at right -

4. Test Condition for AC Withstanding Voltage

(2) Voltage Applied Method

The capacitor's leads or terminals should be firmly

connected to the output of the withstanding voltage test

equipment, and then the voltage should be raised from

near zero to the test voltage. If the test voltage is applied

directly to the capacitor without raising it from near zero,

it should be applied with the zero cross.* At the end of the

test time, the test voltage should be reduced to near zero,

and then the capacitor's leads or terminals should be

taken off the output of the withstanding voltage test

equipment. If the test voltage is applied directly to the

capacitor without raising it from near zero, surge voltage

may occur and cause a defect.

zero cross

Voltage sine wave

Continued from the preceding page.

Failure of a capacitor may result in a short circuit. Be sure

to provide an appropriate fail-safe function such as a fuse

on your product to help eliminate possible electric shock,

fire, or fumes.

Please consider using fuses on each AC line if the

capacitors are used between the AC input lines and earth

(line bypass capacitors), to prepare for the worst case,

such as a short circuit.

3. Fail-safe

AC IN

FUSE

[Chip Mounting Close to Board Separation Point]

Perforation

Slit

Locate chip

horizontal to the

direction in which

stress acts.

Chip arrangement

Worst AGCGB~D Best

[Component Direction]

Soldering and Mounting

1. Vibration and Impact

Do not expose a capacitor to excessive shock or vibration

during use.

2. Circuit Board Material

It is possible for the chip to crack by the expansion and

shrinkage of a metal board.

Please contact us if you want to use our ceramic

capacitors on a metal board such as Aluminum.

3. Land Layout for Cropping PC Board

Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.

<Example

to be avoided>

<Example

of improvement>

Continued on the following page.

C02E.pdf

Oct.1,2012

191

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution

4. Reflow Soldering

When components are exposed to sudden heat, their

mechanical strength can be decreased due to the

extreme temperature changes which can cause flexing

and result in internal mechanical damage, which will

cause the parts to fail. In order to prevent mechanical

damage, preheating is required for both the components

and the PCB board. Preheating conditions are shown in

Table 1. It is required to keep the temperature differential

between the soldering and the components surface (ΔT)

as small as possible.

Solderability of Tin plating termination chips might be

deteriorated when low temperature soldering profile

where peak solder temperature is below the Tin melting

point is used. Please confirm the solderability of Tin

plating termination chips before use.

When components are immersed in solvent after

mounting, be sure to maintain the temperature difference

(ΔT) between the component and solvent within the

range shown in the Table 1.

G--18/21/31

G--32/42/43/52/55

ΔTV190D

ΔTV130D

Part Number Temperature Differential

Table 1

Recommended Conditions

[Standard Conditions for Reflow Soldering]

[Allowable Soldering Temperature and Time]

In the case of repeated soldering, the accumulated

soldering time must be within the range shown above.

Soldering Time (sec.)

260

270

250

240

230

0306090

Soldering Temperature (D)

Inverting the PCB

Make sure not to impose an abnormal mechanical shock on

the PCB.

Continued from the preceding page.

Peak Temperature

Atmosphere

Pb-Sn Solder

Infrared Reflow

230-250°C

Air

Vapor Reflow

230-240°C

Air

Lead Free Solder

240-260°C

Air or N2

Infrared Reflow

Vapor Reflow

60-120 seconds 30-60 seconds

ΔT

Gradual

Cooling

Soldering

Preheating

200°C

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

60-120 seconds 20 seconds max.

ΔT

Gradual

Cooling

Soldering

Preheating

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

Continued on the following page.

Optimum Solder Amount for Reflow Soldering

Overly thick application of solder paste results in

excessive solder fillet height.

This makes the chip more susceptible to mechanical and

thermal stress on the board and may cause cracked

chips.

Too little solder paste results in a lack of adhesive

strength on the outer electrode, which may result in chips

breaking loose from the PCB.

Make sure the solder has been applied smoothly to the

end surface to a height of 0.2mm min.

[Optimum Solder Amount for Reflow Soldering]

0.2mm min.

in section

C02E.pdf

Oct.1,2012

192

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution

The top of the solder fillet should be lower than the

thickness of components. If the solder amount is

excessively large, the risk of cracking is higher during

board bending or under any other stressful conditions.

Continued from the preceding page.

Optimum Solder Amount for Flow Soldering

5. Flow Soldering

When components are exposed to sudden heat, their

mechanical strength can be decreased due to the

extreme temperature changes which can cause flexing

and result in internal mechanical damage, which will

cause the parts to fail. Additionally, an excessively long

soldering time or high soldering temperature results in

leaching by the outer electrodes, causing poor adhesion

or a reduction in capacitance value due to loss of contact

between electrodes and end termination.

In order to prevent mechanical damage, preheating is

required for both the components and the PCB board.

Preheating conditions are shown in Table 2. It is required

to keep temperature differential between the soldering

and the components surface (ΔT) as small as possible.

When components are immersed in solvent after

mounting, be sure to maintain the temperature difference

between the component and solvent within the range

shown in Table 2.

Do not apply flow soldering to chips not listed in Table 2.

G--18/21/31 ΔTV150D

Part Number Temperature Differential

Table 2

[Standard Conditions for Flow Soldering]

[Allowable Soldering Temperature and Time]

In the case of repeated soldering, the accumulated

soldering time must be within the range shown above.

Soldering Time (sec.)

260

270

250

240

230

0102030

Soldering Temperature (D)

Up to Chip Thickness

Adhesive

Recommended Conditions

Peak Temperature

Atmosphere

Pb-Sn Solder

240-250°C

Air

Lead Free Solder

250-260°C

60-120 seconds 5 seconds max.

ΔT

Gradual

Cooling

Soldering

Preheating

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

Continued on the following page.

in section

C02E.pdf

Oct.1,2012

193

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution

Optimum Solder Amount when re-working Using a

Soldering Iron

Solder Amount

6. Correction with a Soldering Iron

When sudden heat is applied to the components by use

of a soldering iron, the mechanical strength of the

components will decrease because the extreme

temperature change causes deformations inside the

components.

In order to prevent mechanical damage to the

components, preheating is required for both the

components and the PCB board.

Preheating conditions, (The "Temperature of the

Soldering Iron Tip", "Preheating Temperature,"

"Temperature Differential" between iron tip and the

components and the PCB), should be within the

conditions of table 3.

It is required to keep the temperature differential between

the soldering Iron and the component's surface (ΔT) as

small as possible.

After soldering, do not allow the component/PCB to cool

down rapidly.

The operating time for the re-working should be as short

as possible. When re-working time is too long, it may

cause solder leaching, in turn causing a reduction of the

adhesive strength of the terminations.

G--18/21/31

G--32/42/43/

52/55

ΔTV190D

ΔTV130D

Part Number

Temperature

Differential

(ΔT)

Table 3

Continued from the preceding page.

7. Washing

Excessive output of ultrasonic oscillation during cleaning

causes PCBs to resonate, resulting in cracked chips or

broken solder. Take note not to vibrate PCBs.

8. Handling

Do not directly touch the chip capacitor, especially the

ceramic body. Residue from hands/fingers may create a

short circuit environment.

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY

RESULT, WORST CASE, IN A SHORT CIRCUIT AND

FUMING WHEN THE PRODUCT IS USED.

air

Atmosphere

150°C min.

Preheating

Temperature

350°C max.

280°C max.

Temperature

of Soldering

Iron Tip

*Applicable for both Pb-Sn and Lead Free Solder.

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

For sizes smaller than Gpp18, the top of the solder fillet

should be lower than 2/3 of the thickness of the

component or 0.5mm whichever is smaller.

For sizes larger than Gpp21, the top of the solder fillet

should be lower than 2/3 of the thickness of the

component.

If the solder amount is excessive, the risk of cracking is

higher during board bending or under any other stressful

conditions.

A Soldering iron ø3mm or smaller should be used.

It is also necessary to keep the soldering iron from

touching the components during the re-work.

Solder wire with ø0.5mm or smaller is required for

soldering.

in section

C02E.pdf

Oct.1,2012

194

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

!Caution

1. Construction of Board Pattern

After installing chips, if solder is excessively applied to

the circuit board, mechanical stress will cause destruction

resistance characteristics to lower. To prevent this, be

extremely careful in determining shape and dimension

before designing the circuit board diagram.

Construction and Dimensions of Pattern (Example)

Flow soldering: 3.2g1.6 or less available.

LgWa b c

2.0g1.25 1.0-1.2 0.9-1.0 0.8-1.1

1.6g0.8 0.6-1.0 0.8-0.9 0.6-0.8

2.2-2.6 1.0-1.1 1.0-1.43.2g1.6

Flow Soldering

LgWa b c

2.0g1.25 1.0-1.2 0.6-0.7 0.8-1.1

2.2-2.4 0.8-0.9 1.0-1.4

1.6g0.8 0.6-0.8 0.6-0.7 0.6-0.8

3.2g1.6

2.0-2.4 1.0-1.2 1.8-2.33.2g2.5

2.8-3.4 1.2-1.4 1.4-1.84.5g2.0

2.8-3.4 1.2-1.4 2.3-3.04.5g3.2

4.0-4.6 1.4-1.6 2.1-2.65.7g2.8

4.0-4.6 1.4-1.6 3.5-4.8

(in mm)

5.7g5.0

Reflow Soldering

Land

Chip Capacitor

Solder Resist

Continued on the following page.

Soldering and Mounting

1. Capacitance Change of Capacitor

(1) In the case of X7R, X7T char.

Capacitors have an aging characteristic, whereby

the capacitor continually decreases its

capacitance slightly if the capacitor is left on

for a long time. Moreover, capacitance might change

greatly depending on the surrounding temperature

or an applied voltage. Therefore, it is not likely

to be suitable for use in a time constant circuit.

Please contact us if you need detailed information.

(2) In the case of any char. except X7R, X7T

Capacitance might change a little depending on the

surrounding temperature or an applied voltage.

Please contact us if you intend to use this product

in a strict time constant circuit.

2. Performance Check by Equipment

Before using a capacitor, check that there is no

problem in the equipment's performance and the

specifications.

Generally speaking, CLASS 2 (X7R, X7T char.) ceramic

capacitors have voltage dependence characteristics

and temperature dependence characteristics in

capacitance. Therefore, the capacitance value may

change depending on the operating condition in the

equipment.

Accordingly, be sure to confirm the apparatus

performance of receiving influence in a capacitance

value change of a capacitor, such as leakage current

and noise suppression characteristics.

Moreover, check the surge-proof ability of a

capacitor in the equipment, if needed, because the

surge voltage may exceed the specific value by the

inductance of the circuit.

Rating

C02E.pdf

Oct.1,2012

195

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Notice

Continued from the preceding page.

2. Mounting of Chips

Mechanical shock of the chip placer

When the positioning claws and pick-up nozzle are worn,

the load is applied to the chip while positioning is

concentrated in one position, thus causing cracks,

breakage, faulty positioning accuracy, etc.

Careful checking and maintenance are necessary to

prevent unexpected trouble.

An excessively low bottom dead point of the suction

nozzle imposes great force on the chip during mounting,

causing cracked chips. Please set the suction nozzle's

bottom dead point on the upper surface of the board.

Thickness of adhesives applied

Keep thickness of adhesives applied (50-105μm or more)

to reinforce the adhesive contact considering the

thickness of the termination or capacitor (20-70μm) and

the land pattern (30-35μm).

Continued on the following page.

in section

in section in section

in section

Land Layout to Prevent Excessive Solder

Mounting Close to a Chassis Mounting with Leaded Components Mounting Leaded Components Later

Examples

to Be Avoided

Examples of

Improvements

by the Land

Division

Lead Wire Connected

to a Part Provided

with Lead Wires.

Chassis Solder (Ground solder)

Adhesive

Base board

Land Pattern

d1Soldering Iron

Lead Wire of

Component to be

Connected Later.

Solder Resist

d2d1<d2Solder Resist

Dimensions of Slit (Example)

Preparing the slit helps flux cleaning and resin

coating on the back of the capacitor.

However, the length of the slit design should

be as short as possible to prevent mechanical

damage in the capacitor.

A longer slit design might receive more severe

mechanical stress from the PCB.

Recommended slit design is shown in the

Table.

LgWd e

2.0g1.25 -

1.0-2.0

1.6g0.8 - -

3.2-3.73.2g1.6

1.0-2.0 4.1-4.63.2g2.5

1.0-2.8 3.6-4.14.5g2.0

1.0-2.8 4.8-5.34.5g3.2

1.0-4.0 4.4-4.95.7g2.8

1.0-4.0 6.6-7.1

(in mm)

5.7g5.0

Land

Chip Capacitor Slit

Solder Resist

C02E.pdf

Oct.1,2012

196

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Notice

4. Cleaning

Please confirm there is no problem in the reliability of the

product beforehand when cleaning it with the intended

equipment.

The residue after cleaning it might cause a decrease in

the surface resistance of the chip and the corrosion of the

electrode part, etc. As a result it might cause reliability to

deteriorate. Please confirm beforehand that there is no

problem with the intended equipment in ultrasonic

cleansing.

5. Resin Coating

Please use it after confirming there is no influence on the

product with the intended equipment before the resin

coating and molding.

A cracked chip might be caused at the cooling/heating

cycle by the amount of resin spreading and/or bias

thickness.

The resin for coating and molding must be selected as

the stress is small when stiffening and the hygroscopic is

low as possible.

Continued from the preceding page.

3. Soldering

(1) Limit of losing effective area of the terminations and

conditions needed for soldering.

(2) Flux Application

(3) Solder

Termination

Depending on the conditions of the soldering

temperature and/or immersion (melting time),

effective areas may be lost in some parts of the

terminations.

To prevent this, be careful in soldering so that any

possible loss of the effective area on the terminations

will securely remain at a maximum of 25% on all

edge length A-B-C-D-A of part with A, B, C, D, shown

in the Figure below.

An excessive amount of flux generates a large quantity of

flux gas, causing deteriorated solderability. So apply flux

thinly and evenly throughout. (A foaming system is

generally used for flow soldering.)

Flux containing too high a percentage of halide may

cause corrosion of the outer electrodes without sufficient

cleaning. Use flux with a halide content of 0.2% max.

Do not use strong acidic flux.

Do not use water-soluble flux.*

(*Water-soluble flux can be defined as non rosin type flux

including wash-type flux and non-wash-type flux.)

The use of Sn-Zn based solder will deteriorate the

reliability of the MLCC.

Please contact our sales representative or product

engineers on the use of Sn-Zn based solder in advance.

C02E.pdf

Oct.1,2012

197

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

GRM/GRJ/GR3 Series

Only for Applications

AC250V Type

GA2 Series

Safety Standard

Certified GA3 Series

Product Information

Notice

MEMO

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

198

Metal Terminal Monolithic

Ceramic Capacitors

For General Purpose KRM/KR3 Series

High Capacitance for General Use

KRM Series p200

Large Capacitance and High Allowable

Ripple Current Type KR3 Series

p204

Package p208

!Caution/Notice p210

Contents

For General Purpose

KRM/KR3 Series

Product Information

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

c Features

1. The product has high reliability against heat and

mechanical impact.

2. Stacking two capacitors reduces the mounting space and

achieves a large capacitance.

3. The unique terminal structure greatly reduces noise from

the ceramics on the board.

c Applications

For smoothing and noise suppression of DC-DC converters

Do not use these products in any Automotive

Power train or Safety equipment incliding Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

appliations such as Power train and Safety equipment.

Part Number LWT

Dimensions (mm)

1.9±0.13.5±0.3 1.7±0.2

KRM31F

0.8±0.2

2.7±0.23.5±0.3 1.7±0.2

2.7±0.21.7±0.2

KRM31K 3.6±0.3

2.7±0.21.85±0.23.7±0.3

2.8±0.2

KRM55L

1.2±0.2

3.7±0.2

6.1±0.4 5.3±0.2

KRM55Q

4.8±0.2

KRM55T

6.4±0.3

KRM55W

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Metal Terminal

Width e (mm)

KRM31FR61E106KH01K 25Vdc X5R (EIA) 10µF±10% 3.5 1.7 2 0.8±0.2mm

KRM31KC81E106KH01K 25Vdc X6S (EIA) 10µF±10% 3.5 1.7 2.9 0.8±0.2mm

KRM55LR71E156KH01K 25Vdc X7R (EIA) 15µF±10% 6.1 5.3 3 1.2±0.2mm

KRM55QR71E226KH01K 25Vdc X7R (EIA) 22µF±10% 6.1 5.3 3.9 1.2±0.2mm

KRM55TR71E336MH01K 25Vdc X7R (EIA) 33µF±20% 6.1 5.3 5 1.2±0.2mm

KRM55WR71E476MH01K 25Vdc X7R (EIA) 47µF±20% 6.1 5.3 6.7 1.2±0.2mm

KRM31KR71H225KH01K 50Vdc X7R (EIA) 2.2µF±10% 3.6 1.7 2.9 0.8±0.2mm

KRM31KR71H475KH01K 50Vdc X7R (EIA) 4.7µF±10% 3.5 1.7 2.9 0.8±0.2mm

KRM55LR71H475KH01K 50Vdc X7R (EIA) 4.7µF±10% 6.1 5.3 3 1.2±0.2mm

KRM55QR71H106KH01K 50Vdc X7R (EIA) 10µF±10% 6.1 5.3 3.9 1.2±0.2mm

KRM55WR71H226MH01K 50Vdc X7R (EIA) 22µF±20% 6.1 5.3 6.7 1.2±0.2mm

KRM55LR71J475KH01K 63Vdc X7R (EIA) 4.7µF±10% 6.1 5.3 3 1.2±0.2mm

KRM55QR71J106KH01K 63Vdc X7R (EIA) 10µF±10% 6.1 5.3 3.9 1.2±0.2mm

KRM55WR71J226MH01K 63Vdc X7R (EIA) 22µF±20% 6.1 5.3 6.7 1.2±0.2mm

KRM31KR72A105KH01K 100Vdc X7R (EIA) 1.0µF±10% 3.5 1.7 2.9 0.8±0.2mm

KRM31KR72A225KH01K 100Vdc X7R (EIA) 2.2µF±10% 3.7 1.7 2.9 0.8±0.2mm

KRM55LR72A475KH01K 100Vdc X7R (EIA) 4.7µF±10% 6.1 5.3 3 1.2±0.2mm

KRM55QR72A685KH01K 100Vdc X7R (EIA) 6.8µF±10% 6.1 5.3 3.9 1.2±0.2mm

KRM55TR72A106MH01K 100Vdc X7R (EIA) 10µF±20% 6.1 5.3 5 1.2±0.2mm

KRM55WR72A156MH01K 100Vdc X7R (EIA) 15µF±20% 6.1 5.3 6.7 1.2±0.2mm

High Capacitance for General Use KRM Series

Metal Terminal Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

200

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

Anti-

noise

Deflecting

crack Soldering

crack

KRM Series Speciﬁ cations and Test Methods

Continued on the following page.

(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free defects such as heat shock.

Fig. 1

10 Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

A static load of 10N using a pressure rod should be applied to

the center in the direction of the arrow and held for 10 s.

9Strength of Metal

Terminal Termination not to be broken or loosened

Step Temperature (°C)

25±2

Min. Operating Temp. ±3

25±2

Max. Operating Temp. ±2

25±2

Rated Voltage Test Voltage

250% of the rated voltage

200% of the rated voltage

DC25V, DC50V, DC63V

DC100V

The capacitance measurement should be made at each step

specified in the Table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/–10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition. (*1)

Capacitance

Temperature

Characteristics

X5R Char.: Within ±15% (Temp. Range: -55 to +85°C)

X6S Char.: Within ±22% (Temp. Range: -55 to +105°C)

X7R Char.: Within ±15% (Temp. Range: -55 to +125°C)

7Dissipation

Factor (D.F.)

[KRM31]

W.V.: 25V

: 0.15 max.

W.V.: 50V

: 0.025 max.

W.V.: 100V

: 0.05 max.

[KRM55]

0.025 max.

The capacitance/D.F. should be measured at reference

temperature at the meaning frequency and voltage shown in

the table.

6 Capacitance Within the specified tolerance

The insulation resistance should be measured with Rated

Voltage and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

[KRM31]

W.V.: 25V

: More than 50MΩ · μF

W.V.: 50V/100V

: More than 500MΩ · μF

[KRM55]

More than 100MΩ · μF

No failure should be observed when voltage in the table is

applied between the terminations for 1 to 5 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or abnormalities

Reference temperature: 25°C

Operating

Temperature Range

X5R Char.: -55 to +85°C

X6S Char.: -55 to +105°C

X7R Char.: -55 to +125°C

No. Test MethodSpecificationsItem

Measuring

Voltage

Nominal

Capacitance

AC0.5±0.1V(r.m.s.)

AC1.0±0.2V(r.m.s.)

C>10μF

CV10μF

Measuring

Frequency

120±24Hz

1±0.2kHz

Pressure Pressure Rod

R 0.5

0.5L

10N, 10T1s

Glass Epoxy Board

C02E.pdf

Oct.1,2012

201

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

KRM Series Speciﬁ cations and Test Methods

UÊV>ÃiÊvÊ,ivÜÊ-`iÀ}

See item 13 Solderability of termination

UÊV>ÃiÊvÊ-`iÀ}ÊÀ

Temp. of solder: 350±10°C

Solder time: 4+1/-0 s

Let sit for 24±2 hrs.at room condition,* then measure

Please refer to "Caution (Soldering and Mounting) Correction

with a Soldering Iron"

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. In accordance with item No.7

°,° In accordance with item No.5

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Reflow Soldering: Peak 260+0/-5°C

The area of soldering 230°C min., 20 to 40 s

Let sit for 24±2 h at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform the heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 h at room condition. (*1)

13 -`iÀ>LÌÞÊvÊ

/iÀ>Ì The metal surface is soldered well

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

(in mm)

Fig. 3

12 iviVÌ

No marking defects

Fig. 2

(in mm)

100

ø4.5

t : 1.6

Capacitance meter

Flexure: V5

20 50

45 45

speed: 1.0mm/s

Pressurize

/Þ«i iÃÊ®

2.2

4.5

5.0

8.0

1.65

5.6

1.0

KRM31

KRM55

300°C

200°C 180°C

230°C min.

260+0/-5°C

60 to 120 s

20 to 40 s

150°C

100°C

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz.

The frequency range, from 10 to 55Hz and return to 10Hz,

should be traversed in approximately 1 min. This motion should

be applied for a period of 2 hrs. in each of 3 mutually

perpendicular directions (total of 6 hrs.).

6LÀ>ÌÊ

,iÃÃÌ>Vi

««i>À>Vi

No defects or abnormalities

>«>VÌ>Vi

Within the specified tolerance

D.F. In accordance with item No.7

Solder Resist

Glass Epoxy Board

Continued from the preceding page.

Continued on the following page.

(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

202

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

KRM Series Speciﬁ cations and Test Methods

(*1) "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply voltage as in the Table for 1000+48/-0 hrs. at maximum

operating temperature ±3°C. Remove and let sit for 24±2 hrs.

at room condition, (*1) then measure.

The charge/discharge current is than 50mA.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition. (*1)

(*2) KRM31KC81E106, KRM31FR61E106, KRM31KR71H225,

KRM31KR71H475, KRM31KR72A105

: 150% of the rated voltage

17 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F.

[KRM31]

W.V.: 25V

: 0.2 max.

W.V.: 50V/100V

: 0.05 max.

[KRM55]

0.05 max.

I.R.

[KRM31]

W.V.: 25V

: More than 25MΩ · μF

W.V.: 50V/100V

: More than 50MΩ · μF

[KRM55]

More than 10MΩ · μF

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

,>Ìi`Ê6Ì>}i ««i`Ê6Ì>}i

200% of the rated voltage (*2)

150% of the rated voltage

DC25V, DC50V

DC63V, DC100V

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500+24/-0 hrs.

Remove and let sit for 24±2 hrs. at room condition,* then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition. (*1)

Õ`ÌÞÊ

-Ìi>`ÞÊ

-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±15%

D.F.

[KRM31]

W.V.: 25V

: 0.2 max.

W.V.: 50V/100V

: 0.05 max.

[KRM55]

0.05 max.

I.R.

[KRM31]

W.V.: 25V

: More than 12.5MΩ · μF

W.V.: 50V/100V

: More than 50MΩ · μF

[KRM55]

More than 10MΩ · μF

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 100 cycles according to the 4 heat treatments listed

in the following table.

Let sit for 24±2 hrs. at room condition,* then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition. (*1)

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±7.5%

D.F. In accordance with item No.7

I.R. In accordance with item No.5

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp. ±3

Room Temp.

Max. Operating Temp. ±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

Solder Resist

Glass Epoxy Board

Continued from the preceding page.

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

203

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

c Features

1. The product has high reliability against heat and

mechanical impact.

2. Stacking two capacitors reduces the mounting space and

achieves a large capacitance.

3. The unique terminal structure greatly reduces noise from

the ceramics on the board.

4. This series can provide higher capacitance value under

DC-Bias condition, compare with previous X7R char.

5. Improve the performance of ripple-resistance compared

with X7R char.

c Applications

1. DC smoothing & EMI ﬁ liter for LED Lighting.

2. For PFC circuit in the swiching power supplies,

AC adaptor.

3. DC-DC converter for general electronic equipment.

Do not use these products in any Automotive

Power train or Safety equipment incliding Battery

chargers for Electric Vehicles and Plug-in Hybrids.

Only Murata products clearly stipulated as

"for Automotive use" can be used for automobile

appliations such as Power train and Safety equipment.

Part Number LWT

Dimensions (mm)

2.8±0.2

KR355L

1.2±0.2

3.7±0.2

6.1±0.4 5.3±0.2

KR355Q

4.8±0.2

KR355T

6.4±0.3

KR355W

Part Number Rated Voltage TC Code

(Standard) Capacitance Length L

(mm)

Width W

(mm)

Thickness T

max.

(mm)

Metal Terminal

Width e (mm)

KR355LD72E474KH01K 250Vdc X7T (EIA) 0.47µF±10% 6.1 5.3 3 1.2±0.2mm

KR355QD72E105KH01K 250Vdc X7T (EIA) 1.0µF±10% 6.1 5.3 3.9 1.2±0.2mm

KR355WD72E225MH01K 250Vdc X7T (EIA) 2.2µF±20% 6.1 5.3 6.7 1.2±0.2mm

KR355LD72W224KH01K 450Vdc X7T (EIA) 0.22µF±10% 6.1 5.3 3 1.2±0.2mm

KR355LD72W474KH01K 450Vdc X7T (EIA) 0.47µF±10% 6.1 5.3 3 1.2±0.2mm

KR355QD72W564KH01K 450Vdc X7T (EIA) 0.56µF±10% 6.1 5.3 3.9 1.2±0.2mm

KR355TD72W105MH01K 450Vdc X7T (EIA) 1.0µF±20% 6.1 5.3 5 1.2±0.2mm

KR355WD72W125MH01K 450Vdc X7T (EIA) 1.2µF±20% 6.1 5.3 6.7 1.2±0.2mm

KR355LD72J104KH01K 630Vdc X7T (EIA) 0.1µF±10% 6.1 5.3 3 1.2±0.2mm

KR355LD72J154KH01K 630Vdc X7T (EIA) 0.15µF±10% 6.1 5.3 3 1.2±0.2mm

KR355QD72J224KH01K 630Vdc X7T (EIA) 0.22µF±10% 6.1 5.3 3.9 1.2±0.2mm

KR355QD72J274KH01K 630Vdc X7T (EIA) 0.27µF±10% 6.1 5.3 3.9 1.2±0.2mm

KR355WD72J474MH01K 630Vdc X7T (EIA) 0.47µF±20% 6.1 5.3 6.7 1.2±0.2mm

KR355WD72J564MH01K 630Vdc X7T (EIA) 0.56µF±20% 6.1 5.3 6.7 1.2±0.2mm

Large Capacitance and High Allowable Ripple Current KR3 Series

Metal Terminal Monolithic Ceramic Capacitors

C02E.pdf

Oct.1,2012

204

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

Anti-

noise

Deflecting

crack Soldering

crack

KR3 Series Speciﬁ cations and Test Methods

Solder the capacitor to the test jig (glass epoxy board).

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 55Hz.

The frequency range, from 10 to 55Hz and return to 10Hz,

should be traversed in approximately 1 min. This motion should

be applied for a period of 2 hrs. in each of 3 mutually

perpendicular directions (total of 6 hrs.).

Vibration

Resistance

Appearance

No defects or abnormalities

Capacitance

Within the specified tolerance

D.F. In accordance with item No.7

Solder

Glass Epoxy Board

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 1.

Then apply 10N force in the direction of the arrow.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free defects such as heat shock.

Fig. 1

10 Adhesive Strength

of Termination No removal of the terminations or other defect should occur.

A static load of 10N using a pressure rod should be applied to

the center in the direction of the arrow and held for 10 sec.

9Strength of Metal

Terminal Termination not to be broken or loosened

Step Temperature (°C)

25±2

Min. Operating Temp. ±3

25±2

Max. Operating Temp. ±2

25±2

Rated Voltage Test Voltage

200% of the rated voltage

150% of the rated voltage

120% of the rated voltage

DC250V

DC450V

DC630V

The capacitance measurement should be made at each step

specified in the table.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition.*

Capacitance

Temperature

Characteristics

Cap. Change

Within +22/-33%

(Temp. Range: -55 to +125°C)

7Dissipation

Factor (D.F.) 0.01 max.

The capacitance/D.F. should be measured at a frequency of

1±0.2kHz and a voltage of AC1±0.2V (r.m.s.).

6 Capacitance Within the specified tolerance

The inslation resisitance should be measured with

DC500V±50V (DC250V±25V in case of rated Voltage:

DC250V, DC450V) and within 60±5 sec. of charging.

Insulation Resistance

(I.R.)

More than 10,000MΩ or 100Ω · μF (Whichever is Smaller)

No failure should be observed when voltage in the table is

applied between the terminations for 1 to 5 sec., provided the

charge/discharge current is less than 50mA.

4 Dielectric Strength No defects or abnormalities

Using calipers and micrometers

3 Dimensions Within the specified dimensions

Visual inspection

2 Appearance No defects or adnormalities

Reference temperature: 25°C

Operating

Temperature Range

-55 to +125°C

No. Test MethodSpecificationsItem

Pressure Pressure Rod

R 0.5

0.5L

10N, 10T1s

Glass Epoxy Board

C02E.pdf

Oct.1,2012

205

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

KR3 Series Speciﬁ cations and Test Methods

Fix the capacitor to the supporting jig (glass epoxy board) shown

in Fig. 4.

Perform the 100 cycles according to the 4 heat treatments listed

in the following table.

Let sit for 24±2 hrs. at room condition*, then measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition.*

Fig. 4

/i«iÀ>ÌÕÀiÊ

ÞVi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±7.5%

D.F. In accordance with item No.7

I.R. In accordance with item No.5

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

-Ìi« /i«iÀ>ÌÕÀiÊc®

Min. Operating Temp. ±3

Room Temp.

Min. Operating Temp. ±2

Room Temp.

/iÊ°®

30±3

2 to 3

30±3

2 to 3

Solder

Glass Epoxy Board

UÊV>ÃiÊvÊ,ivÜÊ-`iÀ}

See item 13 Solderability of Termination

UÊV>ÃiÊvÊ-`iÀ}ÊÀ

Temp. of solder: 350±10°C

Solder time: 4+1/-0 sec.

Let sit for 24±2 hrs.at room condition,* then measure.

Please refer to "Caution (Soldering and Mounting) Correction

with a Soldering Iron".

,iÃÃÌ>ViÊ

ÌÊ-`iÀ}Ê

i>Ì

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±10%

D.F. In accordance with item No.7

I.R. In accordance with item No.5

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Reflow Soldering: Peak 260+0/-5°C

The area of soldering 230°C min., 20 to 40 sec.

Let sit for 24±2 hrs. at room condition*, then measure.

U*ÀiÌÀi>ÌiÌ

Perform the heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition.*

13 -`iÀ>LÌÞÊvÊ

/iÀ>Ì The metal surface is soldered well.

Solder the capacitor to the testing jig (glass epoxy board) shown

in Fig. 2.

Then apply a force in the direction shown in Fig. 3.

The soldering should be done using the reflow method and

should be conducted with care so that the soldering is uniform

and free of defects such as heat shock.

(in mm)

Fig. 3

12 iviVÌ

No marking defects

Fig. 2

(in mm)

100

ø4.5

t : 1.6

Capacitance meter

Flexure: V5

20 50

45 45

speed: 1.0mm/s

Pressurize

/Þ«i iÃÊ®

4.5

8.0

5.6

1.0

KR355

300°C

200°C 180°C

230°C min.

260+0/-5°C

60 to 120 s

20 to 40 s

150°C

100°C

Continued from the preceding page.

Continued on the following page.

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

206

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

KR3 Series Speciﬁ cations and Test Methods

* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Apply voltage as in the Table for 1000+48/-0 hrs. at maximum

operating temperature ±3°C. Remove and let sit for 24±2 hrs.

at room condition,* then measure.

The charge/discharge current is than 50mA.

U*ÀiÌÀi>ÌiÌ

Apply test voltage for 60±5min. at test temperature.

Remove and let sit for 24±2 hrs, at room condition.*

17 vi

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±12.5%

D.F. 0.02 max.

I.R. More than 1,000MΩ or 10MΩ · μF (Whichever is smaller)

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

,>Ìi`Ê6Ì>}i ««i`Ê6Ì>}i

150% of the rated voltage

130% of the rated voltage

120% of the rated voltage

DC250V

DC450V

DC630V

Let the capacitor sit at 40±2°C and relative humidity of 90 to 95%

for 500+24/-0 hrs.

Remove and let sit for 24±2 hrs. at room condition*, then

measure.

U*ÀiÌÀi>ÌiÌ

Perform a heat treatment at 150+0/-10°C for 60±5 min. and

then let sit for 24±2 hrs. at room condition.*

Õ`ÌÞÊ

-Ìi>`ÞÊ

-Ì>Ìi®

««i>À>Vi

No marking defects

>«>VÌ>ViÊ

>}i

Within ±12.5%

D.F. 0.02 max.

I.R. More than 1,000MΩ or 10MΩ · μF (Whichever is smaller)

iiVÌÀVÊ

-ÌÀi}Ì

In accordance with item No.4

Continued from the preceding page.

° /iÃÌÊiÌ`-«iVvV>ÌÃÌi

C02E.pdf

Oct.1,2012

207

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

Package

Taping is standard packaging method.

Part Number Dimensions (mm)

ø330mm Reel

Quantity (pcs.)

Kpp31K

Kpp31F

Kpp55L

Kpp55Q

Kpp55T

Kpp55W

3.5

6.1

1.7

5.3

2.7

1.9

2.8

3.7

4.8

6.4

4,000

5,000

2,000

1,000

500

c Minimum Quantity Guide

c Tape Carrier Packaging

(1) Appearance of Taping

Embossed Tape

(2) Dimensions of Tape

Embossed Tape

Cover Tape: 0.06mm in thickness

Sprocket Hole: As specified in (2)

Cavity for Chip: As specified in (2)

Base Tape: As specified in (2)

CapacitorPacked Capacitors

Continued on the following page.

ø180mm reel is also available.

16mm width 12mm pitch Tape

A*Part Number B*

5.7 6.7

7.4

Kpp55W

*Nominal Value

(in mm)

12.0±0.1

4.0±0.1

1.75±0.1

16.0±0.3

Direction of Feed

7.5±0.1

2.0±0.1 0.4±0.1

C max.

ø1.5+0.1

–0

12mm width 8mm pitch Tape

A*Part Number B*

5.5 6.4

Kpp55L

Kpp55Q 5.5 6.4

Kpp55T 5.5 6.4

4.1

5.8

*Nominal Value

8.0±0.1

4.0±0.1

1.75±0.1

12.0±0.3

Direction of Feed

5.5±0.05

2.0±0.05 0.4±0.1

C max.

ø1.5+0.1

–0

12mm width 4mm pitch Tape

A*Part Number B*

2.2 4.1

Kpp31K

Kpp31F 2.2 4.1

4.1

2.8

*Nominal Value

4.0±0.1

1.75±0.1

12.0±0.3

Direction of Feed

5.5±0.05

2.0±0.05

0.3±0.1

C max.

ø1.5+0.1

–0

C02E.pdf

Oct.1,2012

208

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

Package

Continued from the preceding page.

(3) Dimensions of Reel

(in mm)

2.0±0.5

13.5±1.0 (Tape width 12mm)

17.5±1.0 (Tape width 16mm)

ø13±0.2

ø21±0.8

100 (Tape width 12mm)

80±1.0 (Tape width 16mm)

330±2.0

17.5±1.5 (Tape width 12mm)

21.5±1.0 (Tape width 16mm)

(4) Taping Method

q Tapes for capacitors are wound clockwise. The

sprocket holes are to the right as the tape is pulled

toward the user.

w Part of the leader and part of the empty tape should be

attached to the end of the tape as shown at right.

e The top tape or cover tape and base tape are not

attached at the end of the tape for a minimum of 5

pitches.

r Missing capacitors number within 0.1% of the number

per reel or 1 pc, whichever is greater, and are not

continuous.

t The top tape or cover tape and bottom tape should not

protrude beyond the edges of the tape and should not

cover sprocket holes.

y Cumulative tolerance of sprocket holes, 10 pitches:

±0.3mm.

u Peeling off force: 0.1 to 0.6N in the direction shown at

right.

(in mm)

165 to 180°

Base Tape

Top Tape or Cover Tape

Direction of Feed

160 min. 190 min.

(Top Tape or Cover Tape alone)

Vacant section

Capacitors

mounting unit Vacant section

210 min.

C02E.pdf

Oct.1,2012

209

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

Package

!Caution/Notice

!Caution Notice

c Storage and Operation Conditions ........................ 211

c Rating .................................................................... 211

1. Operating Voltage.............................................. 211

2. Operating Temperature

and Self-generated Heat ................................... 211

3. Fail-safe............................................................. 211

c Soldering and Mounting ........................................ 212

1. Vibration and Impact.......................................... 212

2. Land Layout for Cropping PC Board ................. 212

3. Reflow Soldering ............................................... 212

4. Flow Soldering................................................... 213

5. Correction with a Soldering Iron ........................ 213

c Rating .................................................................... 214

1. Capacitance Change of Capacitor..................... 214

2. Performance Check by Equipment.................... 214

c Soldering and Mounting ........................................ 214

1. Construction of Board Pattern ........................... 214

2. Mounting of Chips.............................................. 214

3. Soldering ........................................................... 214

4. Cleaning ............................................................ 214

5. Resin Coating.................................................... 214

C02E.pdf

Oct.1,2012

210

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

!Caution/Notice

!Caution

Continued on the following page.

Do not use or store capacitors in a corrosive

atmosphere, especially where chloride gas, sulfide

gas, acid, alkali, salt or the like are present. In

addition, avoid exposure to moisture. Before cleaning,

bonding or molding this product, verify that these

processes do not affect product quality by testing the

performance of a cleaned, bonded or molded product

in the intended equipment. Store the capacitors

where the temperature and relative humidity do not

exceed 5 to 40 degrees centigrade and 20 to 70%.

Use capacitors within 6 months of delivery.

Check the solderability after 6 months or more.

c Storage and Operation Conditions

When DC-rated capacitors are to be used in AC or ripple

current circuits, be sure to maintain the Vp-p value of the

applied voltage or the Vo-p which contains DC bias within

the rated voltage range.

When the voltage is applied to the circuit, starting or

stopping may generate irregular voltage for a transit

period because of resonance or switching. Be sure to use

a capacitor with a rated voltage range that includes these

irregular voltages.

When DC-rated capacitors are to be used in input circuits

from a commercial power source (AC filter), be sure to

use Safety Certified Capacitors because various

regulations for withstanding voltage or impulses,

established for all equipment, should be taken into

consideration.

Voltage

Positional

Measurement

DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2)

V0-p V0-p Vp-p Vp-p Vp-p

1. Operating Voltage

2. Operating Temperature and Self-generated Heat

Keep the surface temperature of a capacitor below the

upper limit of its rated operating temperature range.

Be sure to take into account the heat generated by the

capacitor itself. When the capacitor is used in a high-

frequency voltage, pulse voltage, it may self-generate

heat due to dielectric loss.

Applied voltage should be the load such as self-

generated heat is within 20°C on the condition of

atmosphere temperature 25°C. When measuring, use a

thermocouple of small thermal capacity -K of ø0.1mm

in conditions where the capacitor is not affected by

radiant heat from other components or surrounding

ambient fluctuations. Excessive heat may lead to

deterioration of the capacitor's characteristics and

reliability. (Never attempt to perform measurement

with the cooling fan running. Otherwise, accurate

measurement cannot be ensured.)

c Rating

Failure of a capacitor may result in a short circuit. Be sure

to provide an appropriate fail-safe function such as a fuse

on your product to help eliminate possible electric shock,

fire, or fumes.

3. Fail-safe

C02E.pdf

Oct.1,2012

211

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

!Caution

[Chip Mounting Close to Board Separation Point]

Perforation

Slit

Locate chip

horizontal to the

direction in which

stress acts.

Chip arrangement

Worst AGCGB~D Best

[Component Direction]

Soldering and Mounting

Do not expose a capacitor to excessive shock or vibration

during use.

Do not directly touch the capacitor, especially the ceramic

body. Residue from hands/fingers may create a short

circuit environment.

2. Land Layout for Cropping PC Board

1. Vibration and Impact

Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.

Continued on the following page.

<Example

to be avoided>

<Example

of improvement>

3. Reflow Soldering

When components are exposed to sudden heat, their

mechanical strength can be decreased due to the

extreme temperature changes which can cause flexing

and result in internal mechanical damage, which will

cause the parts to fail. In order to prevent mechanical

damage, preheating is required for both the components

and the PCB board. Preheating conditions are shown in

Table 1. It is required to keep the temperature differential

between the soldering and the components surface (ΔT)

as small as possible.

When components are immersed in solvent after

mounting, be sure to maintain the temperature difference

(ΔT) between the component and solvent within the

range shown in the Table 1.

K--31 ΔTV190D

K--55 ΔTV130D

Part Number Temperature Differential

Table 1

Recommended Conditions

[Standard Conditions for Reflow Soldering]

Peak Temperature

Atmosphere

Pb-Sn Solder

Infrared Reflow

230-250°C

Air

Vapor Reflow

230-240°C

Air

Lead Free Solder

240-260°C

Air or N2

Infrared Reflow

Vapor Reflow

60-120 seconds 30-60 seconds

ΔT

Gradual

Cooling

Soldering

Preheating

200°C

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

60-120 seconds 20 seconds max.

ΔT

Gradual

Cooling

Soldering

Preheating

170°C

150°C

130°C

Time

Temperature (D)

Peak Temperature

Pb-Sn Solder: Sn-37Pb

Lead Free Solder: Sn-3.0Ag-0.5Cu

Continued from the preceding page.

C02E.pdf

Oct.1,2012

212

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

!Caution

Inverting the PCB

Make sure not to impose an abnormal mechanical shock on

the PCB.

Continued from the preceding page.

Optimum Solder Amount for Reflow Soldering

If solder paste is excessive, solder between a chip and a

metal terminal melts. This causes the chip to move and

come off.

If solder paste is too little, it causes a lack of adhesive

strength on the metal terminal and the capacitor comes

off.

Please make sure that solder is smoothly applied higher

than 0.3mm and lower than the level of the bottom of the

chip.

[Optimum Solder Amount for Reflow Soldering]

in section

4. Flow Soldering

Do not apply flow soldering.

5. Correction with a Soldering Iron

Please refer to the figure of a soldering iron on the right.

Please use thread solder which is smaller than 0.5mm in

diameter.

A soldering iron must be touched the bottom of metal

terminal.

*1) Do not touch ceramic, or it causes cracks because of

sudden heat.

*2) Do not touch the connection between a chip and a

metal and the outside of that area, or it causes the

chip to move and come off.

Optimum Solder Amount when re-working Using a Solder

Iron.

The top of the solder fillet should be lower than the level

of the bottom of the chip.

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY

RESULT, WORST CASE, IN A SHORT CIRCUIT AND

CAUSE FUMING OR PARTIAL DISPERSION WHEN THE

PRODUCT IS USED.

[Optimum Solder Amount when Re-working Using

a Solder Iron]

in section

17 26

(in mm)

R0.5

ø6.5

Please only touch the metal terminal.

Do not touch the chip.

Soldering Iron

Temperature of iron chip: 350°C max./5s max./60W max.

Electrode Land

Thread Solder

C02E.pdf

Oct.1,2012

213

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

!Caution

Notice

1. Capacitance Change of Capacitor

Capacitors have an aging characteristic, whereby

the capacitor continually decreases its capacitance

slightly if the capacitor is left on for a long time.

Moreover, capacitance might change greatly depending

on the surrounding temperature or an applied voltage.

Therefore, it is not likely to be suitable for use in a time

constant circuit.

Please contact us if you need detailed information.

2. Performance Check by Equipment

Before using a capacitor, check that there is no problem

in the equipment's performance and the specifications.

Generally speaking, CLASS 2 ceramic capacitors have

voltage dependence characteristics and temperature

dependence characteristics in capacitance.

Therefore, the capacitance value may change depending

on the operating condition in the equipment.

Accordingly, be sure to confirm the apparatus

performance of receiving influence in a capacitance

value change of a capacitor, such as leakage current

and noise suppression characteristics.

Moreover, check the surge-proof ability of a capacitor in

the equipment, if needed, because the surge voltage may

exceed the specific value by the inductance of the circuit.

c Rating

1. Construction of Board Pattern

If solder is excessively applied to the circuit board,

mechanical stress will cause destruction resistance

characteristics to lower. To prevent this, be extremely

careful in determining shape and dimension before

designing the circuit board diagram.

Construction and Dimensions of Pattern (Example)

Part Number a b c

Kpp31 1.6 1.8 1.9

Kpp55 2.6 2.7 5.6

(in mm)

Land

Chip Capacitor

Solder Resist

c Soldering and Mounting

3. Soldering

Flux Application

2. Mounting of Chips

Mechanical shock of the chip placer

When the positioning claws and pick-up nozzle are worn,

the load is applied to the chip while positioning is

concentrated in one position, thus causing cracks,

breakage, faulty positioning accuracy, etc.

Careful checking and maintenance are necessary to

prevent unexpected trouble.

An excessively low bottom dead point of the suction

nozzle imposes great force on the chip during mounting,

causing cracked chips and the metal to bend. Please set

the suction nozzle's bottom dead point on the upper

surface of the board.

Do not use strong acidic flux.

Do not use water-soluble flux.*

(*Water-soluble flux can be defined as non rosin type flux

including wash-type flux and non-wash-type flux.)

4. Cleaning

Please confirm there is no problem in the reliability of the

product beforehand when cleaning it with the intended

equipment.

The residue after cleaning it might cause a decrease in

the surface resistance of the chip and the corrosion of the

electrode part, etc. As a result it might cause reliability to

deteriorate. Please confirm beforehand that there is no

problem with the intended equipment in ultrasonic

cleansing.

5. Resin Coating

Please use it after confirming there is no influence on the

product with the intended equipment before the resin

coating and molding.

A cracked chip might be caused at the cooling/heating

cycle by the amount of resin spreading and/or bias

thickness.

The resin for coating and molding must be selected as

the stress is small when stiffening and the hygroscopic is

low as possible.

C02E.pdf

Oct.1,2012

214

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

For General Purpose

KRM/KR3 Series

Product Information

Notice

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

215

ISO 9001 Certifications

Plant

Fukui Murata Mfg. Co., Ltd.

Izumo Murata Mfg. Co., Ltd.

Okayama Murata Mfg. Co., Ltd.

Murata Electronics Singapore (Pte.) Ltd.

Wuxi Murata Electronics Co., Ltd.

Beijing Murata Electronics Co., Ltd.

c Qualified Standards

The products listed here have been produced by ISO 9001

certified factory.

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

216

d ratin

and

AUTION (for stora

e, operatin

, ratin

, solderin

, mountin

and handlin

) in this catalo

to prevent smokin

and/or burnin

, et

og h

as o

nly

typi

cal speci

ﬁ

cations. Therefore, please approve our produc

t sp

eci

ﬁ

cations or transact the approval sheet for

prod

uct speci

ﬁ

cations before orderin

You can register from the Products page on Murata Manufacturing Web site.

http://www.murata.com/products/

This banner is

the entrance of

EMICON-FUN! disseminated widely from basics (principles, characteristics, mounting, etc.) of capacitors, inductors and EMI suppression filters

to information can practically be used.

Updated information is also distributed via the mail magazine.

Please check Murata’s newsletter!

You can learn about electric parts with fun.

http://www.murata.com/products/emicon_fun/

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

217

The WEB site and search engine of ceramic capacitors has been drastically renewed.

Capacitor WEB Site Introduction

Convenient Search

Substantial

Technical

Information

SimSurfing

This is a WEB application to display

characteristics charts of Murata products, and

download the characteristics data.

Frequently Asked Questions (FAQ)

This is a collection of questions asked by

customers.

The contents of problems can easily be

searched by keywords with this search function.

Characteristics Data

(Dimensions / Capacitance - Temperature

Characteristics / DC Bias Characteristics /

AC Voltage / Frequency Characteristics /

Heat Generation by Ripple Currents, etc.)

List of ISO14001 Certified Plants

Safety Certificates by Series

Reliability Test Data

Initial Characteristics / Board Bending

Resistance / Humidity Resistance /

High Temperature Load / Solderability, etc.

s S parameter

s Netlist (SPICE Model)

s Data Libraries

(for Agilent ADS, for AWR Microwave Office®)

http://www.murata.com/products/capacitor/

1234 5

capacitor murata

The type of searches has been increased to respond to various ways of searching.

The products you are searching for can easily be found from about 40,000 part numbers!

The frequency of revisions and discontinuance has been increased to provide the latest information at all times!

sReference drawings (Specifications and Test Methods) can be downloaded in PDF format.

sGraphs of the electrical characteristic data (Capacitance - Temperature characteristics / DC bias characteristics /

AC voltage characteristics / Frequency characteristics) can be displayed.

sReliability test data can be downloaded.

Products can be searched by problems,

shapes or mounting methods.

Search by features

Products can be searched by entire

product lineup.

Search in the lineups

Products can be searched by capacitance,

rated voltage or temperature characteristics.

Search by specifications

Equivalent products of Murata can be

searched by competitors' part numbers.

Cross reference search

Products can be searched by

Murata's part numbers.

Search by part number

C02E.pdf

Oct.1,2012

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

218

Cat. No. C02E-17

!Note C02E.pdf

Oct.1,2012

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

• This catalog has only typical speciﬁ cations. Therefore, please approve our product speciﬁ cations or transact the approval sheet for product speciﬁ cations before ordering.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Murata:

GNM1M2R60J105ME12D GNM1M2R61A104MA01D GNM1M2R61A105ME14D GNM1M2R71C223MA01D

GNM1M2R71C473MA01D GNM212R61C105MA16D GNM214R71C104MA01D GNM214R71E103MA01D

GNM214R71H102MA01D GNM3145C1H100JD01D GNM3145C1H101JD01D GNM3145C1H101KD01D

GNM3145C1H120JD01D GNM3145C1H120KD01D GNM3145C1H121JD01D GNM3145C1H121KD01D

GNM3145C1H150JD01D GNM3145C1H150KD01D GNM3145C1H151JD01D GNM3145C1H151KD01D

GNM3145C1H180JD01D GNM3145C1H180KD01D GNM314F51C104ZD01D GNM314F51C154ZD01D

GNM314F51C683ZD01D GNM314F51H223ZD01D GNM314F51H333ZD01D GNM314F51H473ZD01D

GNM314F52A222ZD01D GNM314F52A332ZD01D GNM314F52A472ZD01D GNM314R71C104KA01L

GNM314R71C104MA01K GNM314R71C104MA01L GNM314R71C223KD01D GNM314R71C223MD01D

GNM314R71C333KD01D GNM314R71C333MD01D GNM314R71C393KD01D GNM314R71C473MA01K

GNM314R71C473MA01L GNM314R71E183KD01D GNM314R71H102KD01D GNM314R71H102MD01D

GNM314R71H103KD01D GNM314R71H103MD01D GNM314R71H152KD01D GNM3145C2A180JD01D

GNM3145C2A180KD01D GNM3145C2A220JD01D GNM3145C2A220KD01D GNM3145C2A270JD01D

GNM3145C2A270KD01D GNM3145C2A330JD01D GNM3145C2A330KD01D GNM3145C2A390JD01D

GNM3145C2A390KD01D GNM3145C2A470JD01D GNM3145C2A470KD01D GNM3145C2A560JD01D

GNM3145C2A560KD01D GNM3145C2A680JD01D GNM3145C2A680KD01D GNM3145C2A820JD01D

GNM3145C2A820KD01D GA252DB3E2102MY02L GA252DB3E2473MY02L GA255DB3E2104MY02L

GA342D1XGF220JY02L GA342DR7GD102KW02L GA342DR7GD151KW02L GA342QR7GD101KW01L

GA342QR7GD102KW01L GA342QR7GD152KW01L GA342QR7GD681KW01L GA343QR7GD182KW01L

GA352DR7GF102KW01L GA352DR7GF681KW01L GA352QR7GF152KW01L GA352QR7GF471KW01L

GA352QR7GF681KW01L GA355DR7GB103KY02L GA355DR7GB153KY02L GA355DR7GB223KY02L

GA355DR7GC101KY02L GA355DR7GC102KY02L GA355DR7GC151KY02L GA355DR7GC152KY02L

GA355DR7GC221KY02L GA355DR7GC222KY02L GA355DR7GC331KY02L GA355DR7GC332KY02L

GA355DR7GC471KY02L GA355DR7GC472KY02L GA355DR7GC681KY02L GA355DR7GF472KW01L

GA355XR7GB333KY06L GNM3145C1H181JD01D GNM3145C1H181KD01D GNM3145C1H220JD01D