24-21SYGC/S530-E1/TR8 - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

Technical Data Sheet

Reverse Package Chip LED

24-21SYGC/S530-XX/TR8

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS compliant

version.

Descriptions

․The 24-21 SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Material Emitted Color

Lens Color

AlGaInP Super Yellow Green Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

Package Outline Dimensions

Note: Tolerances Unless Dimension ±0.1mm , Angle±0.5°,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF 25 mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40~ +90 ℃

Soldering Temperature Tsol 260

(for 5 second) ℃

Electrostatic Discharge ESD 2000 V

Power Dissipation Pd 60 mW

Peak Forward Current

(Duty 1/10 @1KHz) IF 60 mA

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol *Chip

Rank Min. Typ. Max. Unit Condition

E1 11 16 -----

E2 16 22 -----

E3 22 29 -----

E4 29 35 -----

Luminous Intensity Iv

E5 35 50 -----

mcd IF=20 mA

Viewing Angle 2θ1/2 ----- ----- 130 ----- deg IF=20mA

Peak Wavelength λp ----- ----- 575 ----- nm IF=20mA

Dominant Wavelength λd ----- ----- 573 ----- nm IF=20mA

Spectrum Radiation

Bandwidth △λ ----- ----- 20 ----- nm IF=20mA

Forward Voltage VF ----- ----- 2.0 2.4 V IF=20mA

Reverse Current IR ----- ----- ----- 10 μA VR=5V

*24-21SYGC/S530-XX/TR8

Chip Rank

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

Typical Electro-Optical Characteristics Curves

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

xxxxxx

xxxxxxxxxxxx

xxxx

xxxxxxxx

RoHS

■ Label explanation

CAT: Luminous Intensity (mcd)

HUE: Dom. Wavelength (nm)

REF: Forward Voltage (V)

■ Reel Dimensions

Note: Tolerances Unless Dimension ±0.1mm , Angle±0.5°,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

■ Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: Tolerances Unless Dimension ±0.1mm , Angle±0.5°,Unit = mm

■ Moisture Resistant Packaging

Aluminum moistue-proof bag LabelDesiccant

Label

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level : 90 %

LTPD : 10 %

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow

Temp. : 260

℃±

5

℃

Min. 5 sec. 6 min.

22 Pcs. 0/1

2 Temperature Cycle

H : +100

℃

15min.

∫

5 min.

L : -40

℃

15min.

300 Cycles

22 Pcs. 0/1

3 Thermal Shock

H : +100

℃

5min.

∫

10 sec.

L : -10

℃

5min.

300 Cycles

22 Pcs. 0/1

4 High Temperature

Storage Temp. : 100

℃

1000 Hrs.

22 Pcs. 0/1

5 Low Temperature

Storage Temp. : -55

℃

1000 Hrs.

22 Pcs. 0/1

6 DC Operating Life I

F

= 20 mA 1000 Hrs.

22 Pcs. 0/1

7

High Temperature

/ High Humidity

85

℃

/ 85% RH 1000 Hrs.

22 Pcs. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3

seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more

intervals, and do soldering of each terminal. Be careful because the damage of the product is often

started at the time of the hand solder.

EVERLIGHT ELECTRONICS CO.,LTD.

24-21SYGC/S530-XX/TR8

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 9

Device No:SZDSE-241-009 Prepared date:07-26-2005 Prepared by: Aihua Hong

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed

beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com