MITSUMI CMOS Switching Regulator (PWM controlled) MM3005~MM3010 CMOS Switching Regulator (PWM controlled) Monolithic IC MM3005~MM3010 Outline This IC is a PWM controlled switching regulator developed using the CMOS process. Low ripple and high efficiency of 83% typ. (MM3005E) are achieved through PWM control. Further, output voltage is high precision output 2.4%. Features 1. Ultra low consumption current 17.2A typ. (during operation) (MM3005E) 2. High efficiency 83% typ. (MM3005E) 3. High precision output voltage 2.4% 4. Wide operating temperature range -30C~+85C 5. Output voltage 2~5.5V (0.1V can be set in 0.1V steps) Package SOT-25A (Mini mold) Applications 1. Mobile phones, PHS 2. Portable MD 3. Other battery-operated portable equipment Block Diagram MM3005 MITSUMI MM3006 MM3007 MM3008 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI MM3009 MM3010 Pin Assignment MM3005 5 1 MM3006 4 2 3 SOT-25A (TOP VIEW) 1 ON/OFF 2 VOUT 3 NC 4 VSS 5 CONT 5 1 4 2 3 SOT-25A (TOP VIEW) 1 ON/OFF 2 VOUT 3 NC 4 VSS 5 EXT CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI MM3007 MM3008 1 5 1 4 2 3 NC 2 VOUT 3 NC 4 VSS 5 CONT 5 1 SOT-25A (TOP VIEW) 4 2 3 NC 2 VOUT 3 NC 4 VSS 5 EXT 1 VOUT 2 VDD 3 NC 4 VSS 5 EXT MM3010 1 1 2 1 SOT-25A (TOP VIEW) MM3009 5 4 3 VOUT 2 VDD 3 NC 4 VSS 5 CONT 5 4 1 SOT-25A (TOP VIEW) 2 3 SOT-25A (TOP VIEW) Absolute Maximum Ratings Item Storage Temperature Operating Temperature Power Supply Voltage Allowable loss VOUT pin voltage ON/OFF pin voltage CONT pin voltage CONT pin current Symbol TSTG TOPR VDDmax. Pd VOUT ON/OFF VCONT ICONT Rating -40~+125 -30~+85 -0.3~+11 150 -0.3~+11 -0.3~+11 -0.3~+11 300 Unit C C V mW V V V mA Rating -30~+85 +0.9~+9 Unit C V Recommended Operating Conditions Item Operating Temperature Input voltage Rank expand table MM3005A MM3005C MM3005E MM3005G MM3005J Symbol TOPR VIN Ta=25C 2.0V2.4% 2.7V2.4% 3.0V2.4% 3.6V2.4% 5.2V2.4% MM3005B MM3005D MM3005F MM3005H MM3005K 2.5V2.4% 2.8V2.4% 3.3V2.4% 5.0V2.4% 5.4V2.4% *In addition to MM3005, MM3006 ~ MM3010 also have rank indications from A ~ K, as above. CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Electrical Characteristics (Except where noted otherwise, Ta=25C) MM3005, MM3007, MM3009 (It is L rank only MM3009.) Item Symbol Measurement circuit Input voltage Operating start voltage Oscillation start voltage Operation hold voltage VIN VST1 VST2 VHLD 1 1 2 1 Consumption current 1 ISS1 Measuring Circuit IOUT=1mA VOUT= Output voltage 0.95 Switching current ISS2 VOUT= Output voltage+0.5V ISW Switching transistor leak current ISWO Input stability VOUT1 Load stability VOUT2 Output voltage VOUT temperature coefficient Ta Oscillation frequency fosc Maximum duty ratio MaxDuty Soft start Tss 9 0.9 0.8 IOUT=1mA 2 Consumption current 2 Rank Min. Typ. Max. Unit VCONT=0.4V 0.7 A B C D E F G H J K L A B C D E F G H J K L A B C D E F G H J K L 45 61 61 61 78 78 78 114 114 114 45 11.6 14.3 15.5 16.1 17.2 19.1 22.4 38.5 43.9 45.0 13.2 3.1 3.2 3.2 3.2 3.2 3.3 3.3 3.5 3.5 3.5 3.1 71 98 98 98 125 125 125 182 182 182 71 1 1 VOUT=VCONT=9V VIN= Output voltage 0.4 0.6 IOUT=10A~IOUT (Following) 1.25 30 30 1 Ta= -30~85C 50 2 2 VOUT= Output voltage 0.95 VOUT= Output voltage 0.96 IOUT=1mA 42.5 75 3 50 83 6 19.4 23.9 25.9 26.8 28.7 31.8 37.3 64.1 73.1 74.9 22.8 6.2 6.3 6.4 6.4 6.4 6.5 6.5 6.9 6.9 6.9 6.2 V V V V A A mA 1 60 60 A mV mV ppm/C 57.5 90 12 kHz % ms CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Item Symbol Efficiency Consumption current while power off * ON/OFF pin input voltage Measurement circuit EFFI 1 Isss VSH VSL 2 2 2 Measuring Circuit Rank Min. Typ. Max. Unit A B C D E F G H J K L ON/OFF pin=0V VOUT=Output voltage 0.95 VOUT=Output voltage 0.95 75 79 79 79 83 83 83 87 87 87 75 % 0.5 0.75 0.3 A V V Note 1: Consumption current when ON/OFF and power OFF pin input voltage apply only to MM3005. Note 2: If rank is not filled in, applies to all ranks. Note 3: IOUT=Output voltage/250 Note 4: The VDD pin and VOUT pin are connected for the VDD/VOUT separated type. * Electrical Characteristics2 (Except where noted otherwise, Ta=25C) MM3006, MM3008, MM3010 Item Symbol Measurement circuit Input voltage Operating start voltage Oscillation start voltage Operation hold voltage VIN VST1 VST2 VHLD 1 1 2 1 Consumption current 1 ISS1 Measuring Circuit ISS2 9 0.9 0.8 IOUT=1mA IOUT=1mA VOUT=Output voltage 0.95 2 Consumption current 2 Rank Min. Typ. Max. Unit VOUT=Output voltage+0.5V 0.7 A B C D E F G H J K A B C D E F G H J K 14.5 17.8 19.2 20 21.4 23.7 28.8 54 56.2 58.9 3.8 3.9 3.9 3.9 3.9 4 4 4.2 4.2 4.2 24.1 29.7 32 33.3 35.7 39.5 48 89.9 93.6 98.1 7.6 7.7 7.7 7.8 7.8 7.9 7.9 8.3 8.3 8.3 V V V V A A CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Item Symbol Measurement circuit Measuring Circuit Output voltage temperature coefficient Oscillation frequency Maximum duty ratio Soft start Efficiency VIN=Output voltage 0.4~ 0.6 IOUT=10A~IOUT (Following) 1.25 3 Ta=-30~85C 50 4 4 VOUT=Output voltage 0.95 VOUT=Output voltage 0.96 IOUT=1mA VEXT=VOUT-0.4V IEXTL VEXT=0.4V EFFI -1.9 -2.7 -2.7 -2.7 -3.5 -3.5 -3.5 -5.3 -5.3 -5.3 3.8 5.3 5.3 5.3 7 7 7 10.7 10.7 10.7 3 3 IEXTH VOUT1 VOUT2 VOUT Ta fosc MaxDuty Tss A B C D E F G H J K A B C D E F G H J K -2.9 -4 -4 -4 -5.3 -5.3 -5.3 -8 -8 -8 5.7 8 8 8 10.5 10.5 10.5 16 16 16 30 30 EXT pin output current Input stability Load stability Rank Min. Typ. Max. Unit 3 85 75 3 A B C D E F G H J K 100 83 6 76 80 80 80 84 84 84 88 88 88 mA mA 60 60 mV mV ppm/C 115 90 12 kHz % ms % Isss 4 Power off pin=0V 0.5 A VSH VOUT Output voltage 0.95 0.75 ON/OFF pin input voltage V 4 VSL VOUT Output voltage 0.95 0.3 Notes: 1. The current consumption when powering down and input voltage at the ON/OFF pin apply only to the MM3006. Notes: 2. Where the rank is omitted, the figure is common to all ranks. Notes: 3. IOUT=output voltage 250 Notes: 4. Connect both VDD and VOUT pins in models with separate VDD and VOUT pins. Consumption current while power off MITSUMI CMOS Switching Regulator (PWM controlled) MM3005~MM3010 Measuring Circuit 1 2 3 4 Note 1: Coil: L=100H (Mitsumi C5-K3L) transistor: SANYO 2SD1628 Condenser: C=33F (tantal condenser) Base resistor (Rb) : 1.0k Shot key barrier diode: ROHM RB491D Base resistor (Cb) : 2200pF Note 2: The cause of oscillation is due to set wiring and capacitance changes in capacitor caused by temperatures changes, so please take extra care in placing the wires. CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Description of Operation The MM3005 series are pulse width modulation type DC/DC converters. 1: PWM control uses load to change the duty ratio automatically from 0 ~ 83%. 2: A built-in soft start circuit softens the current inrush at start-up. 3: Power OFF pin: Stops or starts voltage rise operation. When the power OFF pin is at low level the internal circuits all stop operating and consumption current is greatly reduced. Note that the power OFF pin structure is open and unstable, so please be sure not to use it open. Further, do not impress voltage of 0.3 ~ 0.75V, as this causes consumption current to increase. When not using the power OFF pin, please connect it to the VOUT pin. Power off pin Operating condition H ON L OFF Open Irregular Application Circuits When used as voltage drop DC-DC converter. CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Characteristics MM3005EN Output voltage3V typ. product Starting output voltage - temperature Starting oscillator voltage - temperature IOUT=1mA 1.2 1.0 0.8 VST2 (V) VST1 (V) 1.0 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 -40 -20 0 20 40 60 0.0 -40 -20 80 100 0 50 VOUT=Output Voltage 0.95 5 ISS2 (A) ISS1 (A) 20 10 VOUT=Output Voltage+0.5 3 2 1 0 20 40 60 0 -40 -20 80 100 0 Ta (C) ISW (mA) 0.8 0.6 0.4 0.2 0 20 40 40 60 80 100 Switch current - temperature ON/OFF pin=0V 1.0 20 Ta (C) Supply current (OFF) - temperature ISSS (A) 80 100 4 30 0.0 -40 -20 60 Supply current 2 - temperature 40 0 -40 -20 40 Ta (C) Ta (C) Supply current 1 - temperature 20 60 80 100 255 200 175 150 125 100 75 50 25 0 -40 -20 Ta (C) VCONT=0.4V 0 20 40 Ta (C) Note: these are typical characteristics. 60 80 100 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Switch transistor leak current - temperature Oscillator frequency - temperature VOUT=VCONT=10V 1.0 70 VOUT=Output Voltage 0.95 65 60 fOSC (kHz) ISWQ (A) 0.8 0.6 0.4 55 50 45 40 0.2 35 0.0 -40 -20 0 20 40 60 30 -40 -20 80 100 0 Ta (C) Maximum duty cycle - temperature VOUT=Output Voltage 0.95 90 1.0 80 0.8 70 60 50 -40 -20 40 60 80 100 ON/OFF Pin input voltage (VSH) - temperature VSH (V) MaxDuty (%) 100 20 Ta (C) VOUT=Output Voltage 0.95 The oscillation waveform of CONT PIN is measured. 0.6 0.4 0.2 0 20 40 60 80 100 0.0 -40 -20 Ta (C) 0 20 40 60 80 100 Ta (C) ON/OFF Pin input voltage (VSL) - temperature 1.0 Soft start time - temperature VOUT=Output Voltage 0.95 The oscillation stop of CONT PIN is measured. IOUT=1mA 14 12 TSS (ms) 10 VSL (V) 0.8 0.6 8 6 4 0.4 2 0.2 0.0 -40 -20 0 -40 -20 0 20 40 60 80 100 Ta (C) Note: these are typical characteristics. 0 20 40 Ta (C) 60 80 100 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Supply Current 1, 2 - VOUT Switch current - VOUT Ta=25C 50 200 ISW (mA) 40 ISS1, 2 (A) Ta=25C, VCONT=0.4V 250 30 20 150 100 50 10 0 0 0 2 4 6 8 10 0 1 VOUT (V) Oscillator frequency - VOUT Ta=25C 70 fOSC (kHz) 60 50 40 30 0 1 2 3 2 3 VOUT (V) 4 5 VOUT (V) Note: these are typical characteristics. 4 5 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Ripple voltage characteristic (MM3005EN) 1. IOUT=200A 2. IOUT=10mA VIN=1.8V CONT Voltage VCONT (1V/div) CONT Voltage VCONT (1V/div) Output Voltage VOUT (20mV/div) Output Voltage VOUT (20mV/div) VIN=1.8V t (10s/div) t (10s/div) 3. IOUT=60mA CONT Voltage VCONT (1V/div) Output Voltage VOUT (20mV/div) VIN=1.8V t (10s/div) Note: these are typical characteristics. CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Transient Response (MM3005EN) 1. VIN : 0V 1.8V Input Voltage VIN (1V/div) IOUT=60mA Output Voltage VOUT (1V/div) Output Voltage VOUT (1V/div) Input Voltage VIN (1V/div) IOUT=1mA t (1ms/div) 2. VON/OFF : 0V t (1ms/div) 3.0V Input Voltage VON/OFF (1V/div) IOUT=60mA, VIN=1.8V Output Voltage VOUT (1V/div) Output Voltage VOUT (1V/div) Input Voltage VON/OFF (1V/div) IOUT=1mA, VIN=1.8V t (1ms/div) t (1ms/div) 3. Load regulation IOUT: 50mA 100A, VIN=1.8V Load Output Current Voltage IOUT VOUT (50mV/div) (20mA/div) 50mA, VIN=1.8V Load Output Current Voltage IOUT VOUT (50mV/div) (20mA/div) IOUT: 100A t (200s/div) t (5ms/div) Note: these are typical characteristics. CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI 4. Line regulation VIN: 2.4V 1.8V, IOUT=50mA Input Output Voltage Voltage VIN VOUT (50mV/div) (500mV/div) 2.4V, IOUT=50mA Input Output Voltage Voltage VIN VOUT (50mV/div) (500mV/div) VIN: 1.8V t (100s/div) t (200s/div) Output current - starting output voltage and holding output voltage dependence characteristic MM3005H 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 VST1 VHLD 0 1 2 3 4 5 6 7 8 9 10 Output Current IOUT (mA) Input Voltage VIN (V) Input Voltage VIN (V) MM3005EN 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 VST1 VHLD 0 1 2 3 4 5 6 7 Input voltage - supply current dependency charavteristic Input Current IIN (A) MM3005 500 450 400 350 300 250 200 150 100 50 0 8 9 10 Output Current IOUT (mA) VOUT=2V VOUT=3V VOUT=5V 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Input Voltage VIN (V) Note: these are typical characteristics. CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI Reference Data (1) MM3005EN (C5-K3L : 47H) Output current - efficiency 3.05 3.04 3.03 3.02 3.01 3.00 2.99 2.98 2.97 2.96 2.95 0.01 Efficiency (%) Output Voltage VOUT (V) Output current - output voltage VIN=0.9V VIN=1.2V VIN=1.8V VIN=2.4V 0.1 1 10 100 1000 100 95 90 85 80 75 70 65 60 55 50 0.01 Output Current IOUT (mA) VIN=0.9V VIN=1.2V VIN=1.8V VIN=2.4V 0.1 1 10 100 1000 Output Current IOUT (C) (2) MM3005EN (C5-K3L : 100H) 3.05 3.04 3.03 3.02 3.01 3.00 2.99 2.98 2.97 2.96 2.95 0.01 VIN=0.9V VIN=1.2V VIN=1.8V VIN=2.4V 0.1 1 Output current - efficiency Efficiency (%) Output Voltage VOUT (V) Output current - output voltage 10 100 1000 100 95 90 85 80 75 70 65 60 55 50 0.01 Output Current IOUT (mA) VIN=0.9V VIN=1.2V VIN=1.8V VIN=2.4V 0.1 1 10 100 1000 Output Current IOUT (C) (3) MM3005EN (C5-K3L : 150H) 3.05 3.04 3.03 3.02 3.01 3.00 2.99 2.98 2.97 2.96 2.95 0.01 VIN=0.9V VIN=1.2V VIN=1.8V VIN=2.4V 0.1 1 Output current - efficiency Efficiency (%) Output Voltage VOUT (V) Output current - output voltage 10 100 Output Current IOUT (mA) 1000 100 95 90 85 80 75 70 65 60 55 50 0.01 VIN=0.9V VIN=1.2V VIN=1.8V VIN=2.4V 0.1 1 10 100 Output Current IOUT (C) Note: these are typical characteristics. 1000 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI (4) MM3005HN (C5-K3L : 47H) Output current - efficiency 5.10 5.08 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 0.01 Efficiency (%) Output Voltage VOUT (V) Output current - output voltage VIN=0.9V VIN=1.8V VIN=3.0V VIN=4.0V 0.1 1 10 100 1000 100 95 90 85 80 75 70 65 60 55 50 0.01 Output Current IOUT (mA) VIN=0.9V VIN=1.8V VIN=3.0V VIN=4.0V 0.1 1 10 100 1000 Output Current IOUT (mA) (5) MM3005HN (C5-K3L : 100H) 5.10 5.08 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 0.01 VIN=0.9V VIN=1.8V VIN=3.0V VIN=4.0V 0.1 1 Output current - efficiency Efficiency (%) Output Voltage VOUT (V) Output current - output voltage 10 100 1000 100 95 90 85 80 75 70 65 60 55 50 0.01 VIN=0.9V VIN=1.8V VIN=3.0V VIN=4.0V 0.1 1 10 100 1000 Output Current IOUT (mA) Output Current IOUT (mA) (6) MM3005HN (C5-K3L : 150H) 5.10 5.08 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 0.01 VIN=0.9V VIN=1.8V VIN=3.0V VIN=4.0V 0.1 1 Output current - efficiency Efficiency (%) Output Voltage VOUT (V) Output current - output voltage 10 100 Output Current IOUT (mA) 1000 100 95 90 85 80 75 70 65 60 55 50 0.01 VIN=0.9V VIN=1.8V VIN=3.0V VIN=4.0V 0.1 1 10 100 Output Current IOUT (mA) Note: these are typical characteristics. 1000 CMOS Switching Regulator (PWM controlled) MM3005~MM3010 MITSUMI (7) MM3005EN (C5-K3L : 47H, COUT : 33F) (8) MM3005EN (C5-K3L : 100H, COUT : 33F) 100 90 80 70 60 50 40 30 20 10 0 0.01 Output current - ripple voltage Ripple Voltage Vr (mV) Ripple Voltage Vr (mV) Output current - ripple voltage VIN=0.9V VIN=1.8V VIN=2.4V 0.1 1 10 100 1000 100 90 80 70 60 50 40 30 20 10 0 0.01 Output Current IOUT (mA) VIN=0.9V VIN=1.8V VIN=2.4V 0.1 1 10 100 1000 Output Current IOUT (mA) (9) MM3005EN (C5-K3L : 150H, COUT : 33F) (10) MM3005HN (C5-K3L : 47H, COUT : 33F) 100 90 80 70 60 50 40 30 20 10 0 0.01 Output current - ripple voltage Ripple Voltage Vr (mV) Ripple Voltage Vr (mV) Output current - ripple voltage VIN=0.9V VIN=1.8V VIN=2.4V 0.1 1 10 100 1000 100 90 80 70 60 50 40 30 20 10 0 0.01 Output Current IOUT (mA) VIN=0.9V VIN=3.0V VIN=4.0V 0.1 1 10 100 1000 Output Current IOUT (mA) (11) MM3005HN (C5-K3L : 100H, COUT : 33F) (12) MM3005HN (C5-K3L : 150H, COUT : 33F) 100 90 80 70 60 50 40 30 20 10 0 0.01 Output current - ripple voltage Ripple Voltage Vr (mV) Ripple Voltage Vr (mV) Output current - ripple voltage VIN=0.9V VIN=3.0V VIN=4.0V 0.1 1 10 100 Output Current IOUT (mA) 1000 100 90 80 70 60 50 40 30 20 10 0 0.01 VIN=0.9V VIN=3.0V VIN=4.0V 0.1 1 10 100 Output Current IOUT (mA) Note: these are typical characteristics. 1000