SENSOR TOOLBOX Pressure Development Board KITMPL115A1EVB Quick Start Guide Unpack the board. Verify package contents according to the kit Web site: www.freescale.com/ sensortoolbox STEP 1 Assemble the hardware by connecting a development board to the interface board. This board is intended for use with a pressure sensor interface board, purchased separately. More information can be found on the Web site. At www.freescale.com/ sensortoolbox download the latest software version by clicking the link. STEP 2 All Sensor Toolbox kits use the same software and driver, so the install only needs to be done once. Follow the on-screen instructions to install the communication driver for the tool. Check back occasionally for software updates. Plug in the USB and turn the board on using the power switch. Run the Sensor Toolbox link on your desktop. STEP 3 Explore other compatible kits at www.freescale.com/sensortoolbox SENSOR TOOLBOX Pressure Development Board Get to know the KITMPL115A1EVB board KITMPL115A1EVB Development Board Freescale MPL115A 3 x 5 x 1.2 mm LGA Metal Package Learn more at www.freescale.com/sensortoolbox. Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2009. Doc Number: KITMPL115A1EVBQSG / REV 0 Agile Number: 926-78326 / Rev A