RS, NS Vishay Dale Wirewound Resistors, Military, MIL-PRF-26 Qualified, Type RW, Precision Power, Silicone Coated FEATURES * * * * High temperature coating Complete welded construction Meets applicable requirements of MIL-PRF-26 Available in non-inductive styles (type NS) with Aryton-Perry winding for lowest reactive components * Excellent stability in operation STANDARD ELECTRICAL SPECIFICATIONS MODEL MIL-PRF-26 TYPE POWER RATING*** P25C W U V 0.05% thru 3% thru 5% 10% RESISTANCE RANGE MIL. RANGE SHOWN IN BOLD FACE WEIGHT (Typical) 0.05% 0.1% 0.25% 0.5%, 1% 3%, 5% 10% g .125 -- -- -- -- 0.1 - 950 0.15 .4 -- 1 - 1k 0.499 - 1k 0.499 - 3.4k 0.1 - 3.4k 0.21 .75 -- 1 - 1.3k 0.499 - 1.3k 0.499 - 4.9k 0.1 - 4.9k 0.23 1.0 -- 1 - 2.74k 0.499 - 2.74k 0.499 - 10.4k 0.1 - 10.4k 0.34 1.0 -- 0.499 - 2.74k 0.499 - 10.4k 0.1 - 10.4k -- 0.34 RW70** 1.0 -- 0.1 - 2.74k RS-1M -- 1.0 -- 1 - 1.32k 0.499 - 1.67k 0.499 - 6.85k 0.1 - 6.85k 0.30 RS-2 -- 4.0 5.5 0.499 - 12.7k 0.499 - 12.7k 0.1 - 47.1k 0.1 - 47.1k 2.10 RS-2M -- 3.0 -- 0.499 - 4.49k 0.499 - 4.49k 0.1 - 18.74k 0.1 - 18.74k 0.65 RS-2B -- 3.0 3.75 0.499 - 6.5k 0.499 - 6.5k 0.1 - 24.5k 0.1 - 24.5k 0.70 RS-2B-300 3.0 -- 0.499 - 6.5k 0.1 - 24.5k 0.1 - 24.5k -- 0.70 RW79** 3.0 -- 0.1 - 6.49k RS-2C -- 2.5 3.25 0.499 - 8.6k 0.499 - 8.6k 0.1 - 32.3k 0.1 - 32.3k 1.6 RS-2C-17 -- 2.5 3.25 0.499 - 6.8k 0.499 - 8.6k 0.1 - 32.3k 0.1 - 32.3k 1.6 RS-2C-23 -- 3.25 0.1 - 32.3k -- -- -- 1.6 RW69* -- 3.0 0.1 - 2.0k RS-5 -- 5.0 6.5 0.499 - 25.7k 0.499 - 25.7k 0.1 - 95.2k 0.1 - 95.2k 4.2 RS-5-69 5.0 -- -- 0.499 - 25.7k 0.1 - 95.2k 0.1 - 95.2k 4.2 RW74** 5.0 -- 0.1 - 24.3k RS-5-70 -- 6.5 0.1 - 95.2k -- -- -- 4.2 RW67* -- 6.5 0.1 - 8.2k RS-7 -- 7.0 9.0 0.499 - 41.4k 0.499 - 41.4k 0.1 - 154k 0.1 - 154k 4.7 RS-10 -- 10.0 13.0 0.499 - 73.4k 0.499 - 73.4k 0.1 - 273k 0.1 - 273k 9.0 RS-10-38 10.0 -- 0.499 - 73.4k 0.1 - 273k 0.1 - 273k -- 9.0 RW78** 10.0 - 0.1 - 71.5k RS-10-39 -- 13.0 0.1 - 273k -- -- -- 9.0 RW68* -- 11.0 0.1 - 20k * Standard tolerance for these Mil parts is 5% 1 and above, 10% below 1. **Standard tolerance for these Mil parts is 0.5% & 1% for resistance values 0.1 and above, 0.1% for resistance values 0.499 and above. ***Vishay Dale RS models have two power ratings depending on operation temperature and stability requirements. NOTE: Shaded area indicates most popular models. RS-1/8 RS-1/4 RS-1/2 RS-1A RS-1A-300 -- -- -- -- TECHNICAL SPECIFICATIONS PARAMETER UNIT Temperature Coefficient ppm/C Dielectric Withstanding Voltage VAC Short Time Overload - Maximum Working Voltage Insulation Resistance Terminal Strength Solderability V lb - Operating Temperature Range Power Rating C - RS RESISTOR CHARACTERISTICS 90 for below 1, 50 for 1 to 9.9, 20 for 10 and above 500 minimum for RS-1/8 thru RS-1A, 1000 minimum for all others 5 x rated power for 5 seconds for 3.75 watt size and smaller, 10 x rated power for 5 seconds for 4 watt size and greater (P x R)1/2 1000 Megohm minimum dry, 100 Megohm minimum after moisture test 5 minimum for RS-1/8 thru RS-1A, 10 minimum for all others MIL-PRF-26 type - Meets requirements of ANSI J-STD-002 Non Mil type - Terminals are 60/40 electro tin plated to facilitate soldering Characterisitic U = - 65/+ 250, Characteristic V = - 65/+ 350 Characteristic U - + 250C max. hot spot temperature, 0.5% max. R in 2000 hr. load life Characteristic V - + 350C max. hot spot temperature, 3.0% max. R in 2000 hr. load life ORDERING INFORMATION RS-1A MODEL www.vishay.com 116 10 RESISTANCE For technical questions, contact ww2bresistors@vishay.com 1.0% TOLERANCE % Document Number 30204 Revision 10-Jun-02 RS, NS Vishay Dale Wirewound Resistors, Military, MIL-PRF-26 Qualified, Type RW, Precision Power, Silicone Coated DIMENSIONS 1.50 [38.10]* Min. A MODEL A D B MATERIAL SPECIFICATIONS Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic, steatite or alumina, depending on physical size Coating: Special high temperature silicone Standard Terminals: Tinned Copperweld(R) End Caps: Stainless steel Deviations for RS-1/8: Thermoset silicone molded construction, endcaps will be nickel-silver alloy and terminals will be tinned copper Part Marking: DALE, Model, Wattage*, Value, Tolerance, Date Code *Wattage marked on part will be "U" characteristic NS NON-INDUCTIVE RATED POWER IN % Models of equivalent physical and electrical specifications are available with non-inductive (Aryton-Perry) winding. They are identified by substituting the letter N for R in the model number (NS-5, for example). Two conditions apply: 1. For NS models, divide maximum resistance values by two 2. Body O.D. on NS-2C may exceed that of the RS-2C by 010" 120 0.155 0.015 [3.94 0.381] -- 0.065 0.015 [1.65 0.381] 0.020 0.002 [0.508 0.051] RS-1/4 0.250 0.031 [6.35 0.787] 0.281 [7.14] 0.085 0.020 [2.16 0.508] 0.020 0.002 [0.508 0.051] RS-1/2 0.312 0.016 [7.92 0.406] 0.328 0.078 + 0.016 - 0.031 0.020 0.002 [8.33] [1.98 + 0.406 - 0.787] [0.508 0.051] RS-1A 0.406 0.031 0.437 RS-1A-300 [10.31 0.787] [11.10] 0.311 [7.90] 0.110 0.015 [2.79 0.381] 0.020 0.002 [0.508 0.051] RS-2 0.625 0.062 0.765 [15.88 1.57] [19.43] 0.250 0.031 [6.35 0.787] 0.040 0.002 [1.02 0.051] RS-2M 0.500 0.062 0.562 [12.70 1.57] [14.27] 0.185 0.015 [4.70 0.381] 0.032 0.002 [0.813 0.051] RS-2B 0.560 0.062 0.622 RS-2B-300 [14.22 1.57] [15.80] 0.187 0.031 [4.75 0.787] 0.032 0.002 [0.813 0.051] RS-2C 0.500 0.062 0.593 [12.70 1.57] [15.06] 0.218 0.031 [5.54 0.787] 0.040 0.002 [1.02 0.051] RS-2C-17 0.500 0.062 0.593 [12.70 1.57] [15.06] 0.218 0.031 [5.54 0.787] 0.032 0.002 [0.813 0.051] RS-2C-23 0.500 0.062 0.593 [12.70 1.57] [15.06] 0.218 0.031 [5.54 0.787] 0.032 0.002 [0.813 0.051] RS-5 0.875 0.062 [22.23 1.57] 1.0 [25.4] 0.312 0.031 [7.92 0.787] 0.040 0.002 [1.02 0.051] RS-5-69 0.875 0.062 0.937 [22.23 1.57] [23.80] 0.312 0.031 [7.92 0.787] 0.040 0.002 [1.02 0.051] RS-5-70 0.875 0.062 [22.23 1.57] 1.0 [25.4] 0.312 0.031 [7.92 0.787] 0.040 0.002 [1.02 0.051] RS-7 1.22 0.062 1.28 [30.99 1.57] [32.51] 0.312 0.031 [7.92 7.87] 0.040 0.002 [1.02 0.051] RS-10 1.78 0.062 1.87 [45.21 1.57] [47.50] 0.375 0.031 [9.53 0.787] 0.040 0.002 [1.02 0.051] RS-10-38 1.78 0.062 1.84 [45.21 1.57] [46.74] 0.375 0.031 [9.53 0.787] 0.040 0.002 [1.02 0.051] RS-10-39 1.78 0.062 1.87 [45.21 1.57] [47.50] 0.375 0.031 [9.53 0.787] 0.040 0.002 [1.02 0.051] 60 40 0-65 -50 Derating CHAR. U 0 50 25 150 250 350 AMBIENT TEMPERATURE IN C 0.020 0.002 [0.508 0.051] 0.285 0.025 [7.24 0.635] 80 20 0.094 0.031 [2.39 0.787] RS-1M 100 CHAR. V D RS-1/8 C *On some standard reel pack methods, the leads may be trimmed to a shorter length than shown. NOTE: RS-1/8 terminal length will be 1.0" [25.4mm] minimum. DIMENSIONS in inches [millimeters] B C (Max.)** **B (Max.) dimension is clean lead to clean lead. PERFORMANCE* TEST CONDITIONS OF TEST Thermal Shock Short Time Overload Dielectric Withstanding Voltage Low Temperature Storage High Temperature Exposure Moisture Resistance Shock, Specified Pulse Vibration, High Frequency Load Life Rated power applied until thermally stable, then a min. of 15 minutes at - 55C 5 x rated power (3.75 watt and smaller), 10 x rated power (4 watt and larger) for 5 seconds 500 minimum for RS-1/8 thru RS-1A, 1000 for all others, duration of 1 minute - 65C for 24 hours 250 hours at: U = + 250C, V = + 350C MIL-STD-202 Method 106, 7b not applicable MIL-STD-202 Method 213, 100g's for 6 milliseconds, 10 shocks Frequency varied 10 to 2000Hz, 20g peak, 2 directions 6 hours each 2000 hours at rated power, + 25C, 1.5 hours "ON", 0.5 hours "OFF" 5 to 10 sec., 5 or 10 lb pull test (depending on size), Terminal Strength torsion test - 3 alternating directions, 360 each *All R figures shown are maximum, based upon testing requirements per MIL-PRF-26. Document Number 30204 Revision 10-Jun-02 For technical questions, contact ww2bresistors@vishay.com TEST LIMITS Characteristic U Characteristic V (0.2% + 0.05) R (2.0% + 0.05) R (0.2% + 0.05) R (2.0% + 0.05) R (0.1% + 0.05) R (0.1% + 0.05) R (0.2% + 0.05) R (2.0% + 0.05) R (0.5% + 0.05) R (2.0% + 0.05) R (0.2% + 0.05) R (2.0% + 0.05) R (0.1% + 0.05) R (0.2% + 0.05) R (0.1% + 0.05) R (0.2% + 0.05) R (0.5% + 0.05) R (3.0% + 0.05) R (0.1% + 0.05) R (1.0% + 0.05) R www.vishay.com 117