Contact rating: Contact resistance: Insulation resistance: Dielectric strength: Operating temperature: Mechanical life: Soldering conditions: Mounting instruction: Material: Included accessories: 3A, 250V AC / 6A, 125V AC 4A, 30V DC / 5A, 12V DC 6A, 6V DC 20mOhm max. 1 000MOhm min. at 500V DC 1 500V, 50Hz for the duration of 1 minute -45C to +140C min. 200 000 cycles hand-soldering: max.: 420C, 3sec., GOW auto-soldering: max.: 270C, 5sec. max. torque: 49Ncm Terminal: brass, C1020 silver plated Case: DAP Housing: stainless steel, CNS9265 Bushing: copper alloy, C3604BD nickel plated Actuator: copper alloy, C3604BD chrome plated Cap: aluminium 2 pes. nut M6x0.75, nickel plated, 9mm wrench size 1 pc. tooth washer 1 pc. locking washer Cap is not included Compliance: RohS II (2011/65/EU) lo 26.4 8.0+1.0 2 2.0 EPOXY SEAL S M6x0.75 4.0 \ | vr (1) fe F G (2) : (3) qlee 2.2x0.8 KEYWAY CAP PANEL MOUNTING 6.4 26.2 CONTACT ARRANGEMENT ES toggle toggle @2.2 o code for x function towards keyway |Jopposite to keyway 0 D On-On 1-2 2-3 toggle toggle toggle code for x function towards keyway in center opposite to keyway E On-Off-On 1-2 open 2-3 Specifications: Tolerances: 0.00: +0.25mm Date Name 0.0: +0.40mm 08/09 dr M T L 1 0 6 Revised 10/17} dr Page Dimension 01/11] dr_| kenitter-switch 3 O 1 9 O { Panel mouting 05/10] dr 1/1 Modifications Date [Name |