FF0950PB - Faraday Technology

FARA168d Page 1 of 2 Dec-99(A)

STEEPNESS FACTOR 1.14

These low pass video filters are intended for bandwidth limitation over the video range of frequencies where it is

required to attenuate frequencies close to the edge of the passband. The filters are 9-pole Elliptical Function networks

which have been equalised to correct for group delay distortion over 80% of the passband and for loss distortion over

the entire passband. Degradation of a composite video signal is minimal when a 4.5 MHz or 5.5 MHz filter is selected

for a 525 or 625 line T.V. system. Typical uses are to suppress sound or telephone channels placed above and close to

the video band.

Order Code End of Passband Start of Stopband Group Delay Ripple Delay Time

MHz MHz ns ns

FF0300P* 3.00 3.42 25 1063

FF0350P* 3.50 3.99 20 910

FF0400P* 4.00 4.56 20 798

FF0450P* 4.50 5.13 17 710

FF0500P* 5.00 5.70 17 638

FF0550P* 5.50 6.27 17 580

FF0600P* 6.00 6.84 15 530

FF0650P* 6.50 7.41 15 490

FF0700P* 7.00 7.98 15 455

FF0750P* 7.50 8.55 10 425

FF0800P* 8.00 9.12 10 400

FF0850P* 8.50 9.69 10 375

FF0900P* 9.00 10.26 10 355

FF0950P* 9.50 10.83 10 335

FF1000P* 10.00 11.40 10 320

* insert suffix ‘D’ for DIP package eg FF0500PD DR00020B

suffix ‘B’ for BNC package eg FF0500PB DR00029A

Other data Impedance 75 ohms

Insertion Loss < 2.0 dB

Stopband attenuation wrt 100 kHz > 45 dB

Amplitude ripple in passband < 0.2 dB

Video performance for filters of 5.5 MHz (4.5 MHz for 525 line) and above.

Pulse and bar: K - rating < 1.0 %

Luminance/Chrominance Gain inequality (20T) < 1.5 %

Luminance/Chrominance Delay inequality < 5 ns

Aqueous Washable No

FF….P SERIES

LOW PASS VIDEO FILTER