(according fo IEC 61076-2-101) Material further information: no. of poles / coding |4 7 A contacts / surface CuZn with gold Layer - see fechnical data M12-3 contact termination dip solder contact carrier PA6T/66 contact-@ 4xQ1mm colour black temperature range -40C to +85C Sealing gasket FKM protection class IP67 mating cycles >100 While mounting the insulating body with o-ring into the housing, the axial mounting force on each connnector shouldnt be higher than 80N. Avoid radial forces! 29,6 : | | | = | Byes U | UU | P 1.0.05 19,2 $16 UWG German Law. Offenders will be held liable 15,9 o-ring enclosed separately ALL specified data refers to the mounted M12 installation plugs =I1P54 and requires that the connector pair be correctly plugged and locked. Influences from wires, cables or PCB mounting are also to be taken into consideration. The copying. distribution and utilistion of this document as well as the communication of the contents to others for the payment of damages according to 19 UWG German Law. All rights reserved. in particular the right to Carry out patent. utility model or ornamental design registrations. without expressed authorization is prohibited according to . dr iLL ing plan * measure X depends on the = . . installed housing, 8 . | component side (front view PC-Board) 4540.02 see installation recommendation ek of the housing series M12 DSIV 5e3 3.54 ees blocked area on PCB pet wag +0,05 S5 || D2.8 LA woe a oO a38 | | > D2,050P S fel | 1 | os 2.2 | a | a | | t on OTe LE aoe wn | ale TL | Sa8 1 NIN r | | eee [|X | | : ag | [o | | : ge, | I | | } td aes | - >< e2he ~ 20 _ [ I : oT D Hil | S [Bo. sees Design of the solder holes epee Bolder = process (THR. wave) front_ganel SE I tot . scale: gse- act to DIN ISO 2768-c technical changes reserved Index 1 / 2012-07-06 2.1 gigs date name : is 8 & |design|2012-07-06] Scheerer series DSIV #5 2| chk. M12-installation plug angled page: 1 5532 4-pole pin/A-cod./SCO/flat gasket of 2 sits drawing-no.: BS-O04P2NE2M500 doc.-no.: |00671353 fife PHEMIX order-no.: 1436589 E53 article designation: SACC-DSIV-MS-4CON-L90 SCO$16 UWG German Law. Offenders will be held liable The copying. distribution and utilistion of this document as well as the communication of the contents to others for the payment of damages according to 19 UWG German Law. All rights reserved. in particular the right to Carry out patent. utility model or ornamental design registrations. without expressed authorization is prohibited according to gen verpflichten zu Schadenersalz (19 UWG). Alle Rechte -. Gebrauchsmuster- oder Geschmacksmusteranmeldungen durchzuf ihren. D-71083 Herrenberg Mechanical data (according to IEC 61076-2-101) Locking thread [M12 SPEEDCON further information: Material - see installation recommendation flange housing GD-Zn, nickel-plated SACC-M12-SCOQ PLUG IC sealing gasket HNBR nut brass, nickel-plated temperature range -40C to +85C | m | = | 1 | flat gasket . | 1,611.5 , | N | | 1 l | Y Ln | | | I nut M12x1 Mex" enclosed separately SW 14 Weilergabe sowie Vervielf &tigung dieses Dokuments. Verwertung und Milteilung seines_Inhalts gem 18 UWG verboten. Heisenbergstrasse 1 soweit nicht ausdricklich gestattet. Zuwiderhandlu vorbehalten, insbesondere das Recht, Patent CONINVERS GmbH All specified data refers to the mounted M12 installation plugs >/P54 and requires that the connector pair be correctly plugged and locked. Influences from wires, cables or PCB mounting are also to be taken into consideration. ; scale: ace To DIN 190. 2768-c technical changes reserved Index 1 / 2012-07-06 24 date name . design) 2012-07-06) Scheerer M12-in pee DSIV chk. -Installation plug angled ane: 2 4-pole pin/A-cod./SCO/flat gasket ae drawing-no.: BS-Q4P2NE2M500 doc.-no.: |00671353 PREM IX | order-no.. 1436589 article designation: SACC-DSIV-MS-4CON-L90 SCO