1power.pulseelectronics.com SPM2007_58 (02/19) http://www.power.pulseelectronics.com/contact
SMT Current Sense Transformers
PA1005.XXXNL and PM2165.XXXNL
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C
Part Number
Turns Ration Current Rating2
(A) Secondary Inductance
(mH MIN)
DCR (mΩ MAX) Hipot
(VRMS)
Commerical Automotive7Primary
(8-7) Secondary
(1-3)
PA1005.020NL PM2165.020NL 1:20 20 0.08 0.75 550 1000
PA1005.030NL PM2165.030NL 1:30 20 0.18 0.75 870 1000
PA1005.040NL PM2165.040NL 1:40 20 0.32 0.75 1140 1000
PA1005.050NL PM2165.050NL 1:50 20 0.5 0.75 1500 1000
PA1005.060NL PM2165.060NL 1:60 20 0.72 0.75 2250 1000
PA1005.070NL PM2165.070NL 1:70 20 0.98 0.75 4750 1000
PA1005.100NL PM2165.100NL 1:100 20 2.00 0.75 5500 1000
PA1005.125NL PM2165.125NL 1:125 20 3.00 0.75 6500 500
1. The temperature of component (ambient temperature plus temper-ature rise) must be
within the specified operating temperature range.
2. The maximum current rating is based upon temperature rise of the component and
represents the DC current which will cause a typical temperature rise of 40°C with no
airflow.
3. To calculate value of terminating resistor (Rt) use the following formula:
Rt (W) = Vref * N /(Ipeak_primary)
4. The peak flux density of the device must remain below 2000 Gauss. To calculate the
peak flux density for uni-polar current use following formula:
Bpk = 37.59 * Vref * (Duty_Cycle_Max) * 105 / (N * Freq_kHz)
* for bi-polar current applications divide Bpk (as calculated above) by 2.
5. Optional Tape & Reel packaging can be ordered by adding a “T” sux to the part num-
ber (i.e. PA1005.020NL becomes PA1005.020NLT). Pulse complies to industry standard
tape and reel specification EIA481.
6. The “NL” sux indicates an RoHS-compliant part number. Non-NL suxed parts are
not necessarily RoHS compliant, but are electrically and mechanically equivalent to NL
versions. If a part number does not have the “NL” sux, but an RoHS compliant version
is required, please contact Pulse for availability.
7. The PM2165.XXXNL part numbers are AEC-Q200 and IATF16949 certified. The mechanical
dimensions are 100% tested in production but do not necessarily meet aproduct capabil-
ity index (Cpk) >1.33 and therefore may not strictly conform to PPAP.
Height: 5.5mm Max
Footprint: 8.4mm x 7.2mm Max
Current Rating: up to 20A
Frequency Range: 20kHz to 1MHz
Low Primary DCR version of P820X
Notes:
2power.pulseelectronics.com SPM2007_58 (02/19) http://www.power.pulseelectronics.com/contact
SMT Current Sense Transformers
PA1005.XXXNL and PM2165.XXXNL
Pulse Worldwide Headquarters
15255 Innovation Drive Ste 100
San Diego, CA 92128
U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Pulse Electronics GmbH
Am Rottland 12
58540 Meinerzhagen
Germany
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen,
P.R. China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse South Asia
3 Fraser Street 0428
DUO Tower
Singapore 189352
Tel: 65 6287 8998
Fax: 65 6280 0080
Pulse North Asia
1F., No.111 Xiyuan Road
Zhongli District
Taoyuan City 32057
Taiwan (R.O.C)
Tel: 886 3 4356768
Fax: 886 3 4356820
For More Information
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned
herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Mechanical Schematic
Weight ...........................0.34grams
Tape & Reel ........................900/reel
Tray .....................................120/tray
TAPE & REEL INFO
SURFACE MOUNTING TYPE, REEL/TAPE LIST
PART NUMBER REEL SIZE (mm) TAPE SIZE (mm) QTY
A G P1W K0PCS/REEL
PA1005.XXXNLT/PM2165.XXXNLT Ø330 16.4 12 16 5.65 900
USER DIRECTION OF FEED
G
K
0
P
1
WA
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
