TOCP100−□□B
2001-06-13
1
OPTICAL FIBER WITH FIBER OPTIC CONNECTORS
TOCP100−□□B
ALL PLASTIC FIBER
WITH FIBER OPTIC CONNECTORS
Conform to JIS F05 type
Simplex type
APF (980 / 1000 µm)
1. Maximum Ratings (Ta = 25°C)
ITEM SYMBOL RATINGS UNIT
Storage Temperature Tstg −40 to 70 °C
Operating Temperature Topr −20 to 70 °C
Between Fiber and Connector TCF 19.6 N
Tension
Optical Fiber TF 49 N
Bending Radius r Min 25 mm
Unit: mm
TOCP100−□□B
2001-06-13
2
2. Optical Characteristics (Ta = 25°C)
ITEM SYMBOL CONDITIONS MIN TYP. MAX UNIT
Transmission Loss λp = 650 nm, Measured by fiber
length 50 m ― 220 240 dB / km
3. Precautions for Operation
(1) The maximum ratings are the limit values which should not be exceeded when using this product. All
of these values must be within the defined range. If the maximum ratings, are exceeded the deviced
characteristics may not be recoverable and, in extreme cases, permanent damage to the product may
result.
Care should be taken not to exceed the maximum ratings when using this product.
(2) Care should be taken not to drop heavy objects onto the optical fiber cables.
(3) When connecting or disconnecting the optical fiber with fiber optic connector, be sure to hold the fiber
optic connector. Do not hold the optical fiber cable when connecting or disconnecting.
(4) When inserting the fiber optic connector into the fiber optic transmitting/receiving module, be sure to
follow the correct fitting alignment.
(5) Keep the end face of the optical fiber with fiber optic connector clean. If contaminated, wipe it gently
with tissue paper.
(6) When bending the optical fiber cable to install it, note that the recommended bending radius is six to
ten times longer than the minimum bending radius.
(7) −□□ indicates the length and the unit of length of the optical fiber of the optical fiber with fiber optic
connector or optical fiber products. The length of the optical fiber is the distance from one end of fiber
optic connector to the other end. The minimum fiber length is 0.2m.
EX. TOCP100−10MB
Unit of length
C : cm
M : m
Length
TOCP100−□□B
2001-06-13
3
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
• The information contained herein is subject to change without notice.
000707EA
A
RESTRICTIONS ON PRODUCT USE
