BCD.00288_AA_December-3-2013 1 www.power-one.com
DATA SHEET
Dialysis
Monitoring
Pumps
Surgical Devices
Home Health
Portable Devices
MBC150 SERIES MEDICAL 150W AC/DC
110 W convection cooled
-20 to 50 deg C full load operation
2 x MOPP Isolation
90-264 VAC input
2” x 4” x 1.3” (50.8 x 101.6 x 33.6 mm)
Fan output, 12 Vdc @ 0.5A standard
No minimum load required
Conducted EMI EN 55022-B, FCC Part 15 Level B
Medical Safety Agency Approvals
FEATURES
APPLICATIONS
MBC150 Series 2 www.power-one.com
DATA SHEET
TECHNICAL DATA:
Input
DESCRIPTION/CONDITION
Universal Input
90 - 264 Vac
120 – 390 Vdc
47-63 Hz
230 Vac (cold start)
65 A max.
264 Vac 50 / 60 Hz
< 250 μA max
120 Vac @ Full load
230 Vac @ Full load
1.7 A
0.85 A
Output
PARAMETER
DESCRIPTION/CONDITION
Voltage Adjustment
V1
± 3%
Transient Response
Main output 50 to 100% load change, 50 Hz,
50% duty cycle, 0.1A / uSec
< 10%, recovery time < 5 mSec
Over Voltage Protection
V1
110 to 150% rated max
Over Current Protection
Rated output current
110% Typical
Short Circuit Protection
Automatic recovery
Efficiency
>86%
Rise Time
< 100 mSec
Set Point Accuracy (Main Output)
± 1%
Ordering Information
PRODUCT FAMILY
VOLTS
(VDC)
MAX LOAD
CONVECTION (1)
MAX LOAD
300 LFM (1)
MINIMUM
LOAD (A)
RIPPLE &
NOISE (4)
CONNECTOR
TOTAL
REGULATION
MBC150-1005G
5.0
16.0 A
16 A
0
1%
JST
± 2.5%
MBC150-1005G-2
5.0
16.0 A
16 A
0
1%
JST
± 2.5%
MBC150-1T05G
5.0
16.0 A
20 A
0
1%
Screw Terminal
± 2.5%
MBC150-1T05G-2
5.0
16.0 A
20 A
0
1%
Screw Terminal
± 2.5%
MBC150-1012G
12
8.33 A
12.5 A
0
1%
JST
± 2.5%
MBC150-1012G-2
12
8.33 A
12.5 A
0
1%
JST
± 2.5%
MBC150-1T12G
12
8.33 A
12.5 A
0
1%
Screw Terminal
± 2.5%
MBC150-1T12G-2
12
8.33 A
12.5 A
0
1%
Screw Terminal
± 2.5%
MBC150-1015G
15
6.67 A
10.0 A
0
1%
JST
± 2.5%
MBC150-1015G-2
15
6.67 A
10.0 A
0
1%
JST
± 2.5%
MBC150-1T15G
15
6.67 A
10.0 A
0
1%
Screw Terminal
± 2.5%
MBC150-1T15G-2
15
6.67 A
10.0 A
0
1%
Screw Terminal
± 2.5%
MBC150-1024G
24
4.17 A
6.25 A
0
1%
JST
± 2.5%
MBC150-1024G-2
24
4.17 A
6.25 A
0
1%
JST
± 2.5%
MBC150-1T24G
24
4.17 A
6.25 A
0
1%
Screw Terminal
± 2.5%
MBC150-1T24G-2
24
4.17 A
6.25 A
0
1%
Screw Terminal
± 2.5%
MBC150-1048G
48
2.08 A
3.13 A
0
1%
JST
± 2.5%
MBC150-1048G-2
48
2.08 A
3.13 A
0
1%
JST
± 2.5%
MBC150-1T48G
48
2.08 A
3.13 A
0
1%
Screw Terminal
± 2.5%
MBC150-1T48G-2
48
2.08 A
3.13 A
0
1%
Screw Terminal
± 2.5%
Vfan (all models)
12
0.5 A (3)
0.5 A (3)
20%
BCD.00288_AA_December-3-2013 3 www.power-one.com
DATA SHEET
Notes:
1. Combined power from main output and Vfan should not exceed total power rating.
2. Fan output tolerance is ± 20%.
3. Peak current for fan output is 1A.
4. Ripple is 2% up to 20% load and less than 1% above 20% load. Output noise measurement is made with a 20 MHz
bandwidth using a 6” twisted pair, terminated with a 10 uF tantalum capacitor in parallel with a 0.1 uF ceramic capacitor.
5. Class 1 models have Earthing tab J4. Class 2 models (-2 suffix) have no Earthing tab.
6. Specifications are for nominal input voltage, 25° C and max load unless otherwise stated.
7. Air flow over length of supply recommended (either direction) for forced air rating.
8. Derate output power per chart below.
9. Specifications subject to change without notice.
10. Warranty 2 years.
General Specifications
PARAMETER
DESCRIPTION/CONDITION
Hold Up Time
120 Vac
6 mSec
230 Vac
10 mSec
MTBF
>200 khrs
Bellcore TR-332
Switching Frequency
PFC converter variable 35 to 250 kHz, 90
kHz typical
Resonant converter: Variable 35 to 250
kHz, 90 kHz typical
Isolation Voltage
Input to Output Min 5900 Vdc
Input to Ground 2120 Vdc
Weight
150 g (0.33 lbs)
Environmental
PARAMETER
DESCRIPTION/CONDITION
Operating Temperature
Operating
-20 to +70° C. See derating charts below.
Storage
-40 to +85° C
Altitude
Operating 10,000 ft.
Non-operation 40,000 ft.
Humidity
95%
Non-condensing
Conducted Emissions
EN55022, FCC part 15 Level B
Radiated Emissions
EN55022, FCC part 15 Level B
To be controlled in end system
Electromagnetic Susceptibility
EN61000-4
2, 3, 4, 5 Level 3
Harmonic Current
EN61000-3-2, Class D
Safety
PARAMETER
DESCRIPTION/CONDITION
EN / UL / CSA
60601-1 3rd Edition
MBC150 Series 4 www.power-one.com
DATA SHEET
Figure 1 Output Power Vs. Temperature
Figure 2 Dimension Drawing (Top and Side View)
Mechanical
INPUT = J1
EARTHING TAB = J4
DC OUTPUT = J2
FAN= J3
Pin 1: AC Line
Pin 2: Removed
Pin 3: AC Neutral
Molex: 19705-4301
Pin 1 = V1
Pin 2 = V1
Pin 3 = RTN
Pin 4 = RTN
Pin 1 = +12 V @ 0.5 A
Pin 2 = Fan return
(isolated from DC output)
Mating Connector:
Molex: 09-50-3031
Pins: 08-50-0106
Mating Connector:
Molex: 190030001
Mating Connector:
JST VHR-4M, Pins: SVH-41T-P1.1
AWG #20 to #16
Mating Connector:
Tyco: 640440-2
Copyright © 2010 Power-One Inc. All rights reserved. Words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the
trademarks and service marks of Power-One Inc. in the U.S. and other countries. All other product or service names are the property of their respective holders.
Power-One products are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights. Power-One reserves the
right to make changes to any products and services at any time without notice. Power-One assumes no responsibility or liability arising out of the application or use
of any information, product, or service described herein except as expressly agreed to in writing by Power-One Inc.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life
support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president
of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date
manufactured. Specifications are subject to change without notice.