Fine Pitch SMT Board to Board Connectors Series 5015 Series 5015 is the board to board connector system that supports the IEEE P-1386 standard for mezzanine card installation in industrial computer applications including VME, Futurebus, and other host boards. At 1.0mm pitch, the 64-position connector can be used with standard PCI and S-Bus mezzanine cards in 64 circuit combinations with mated heights of 8-15mm. The IEEE P-1386 standard was developed to facilitate the use of modular boards (called mezzanine cards) to add functionality to VME bus systems, typically used in real time systems and industrial computers. PCI was selected as the new auxiliary bus structure because of its higher bandwidth, speed, and flexibility for handling I/O functions. In addition, the chips, components, and software for implementing the PCI standard were already in wide use by the personal computer marketplace. FEATURES Conforms to IEEEE P-1386 Common Mezzanine Card Standard. Flexible combination of plug with receptacle achieving a wide variety of mated heights ranging from 8.0mm to 15.0mm. Parts can be supplied with or without boss. Designed for pick and place mounting. Parts are supplied in tape and reel. SPECIFICATIONS Series Mated Height Pitch Current Voltage D.W. Voltage Mating Cycles 40 5015 8.0 to 15.0mm 1.0mm 1A Max 250V Max 250V rms/min 100 Fine Pitch SMT Board to Board Connectors Series 5015 Mezzanine Card Connector 1.0mm Pitch PLUG Variation L STD 6.25 (0.246) 7.25 (0.285) 8.25 (0.325) H1 H2 Mated Height 8.0 (0.315) 9.0 (0.354) 10.0 (0.394) 11.0 (0.433) 12.0 (0.472) 13.0 (0.512) 14.0 (0.551) 15.0 (0.591) Plug Receptacle STD STD H1 STD H2 STD H1 H2 H2 H2 H2 H3 H1 H5 H2 H5 MATED HEIGHT COMBINATIONS HOW TO ORDER 14 5015 064 X XX Prefix Series Number Number of Positions Variation Code 0 = Without Boss 1 = With Boss Type Code 00 = Standard 01 = H1 02 = H2 XXX Finish Code 863 = Ni Undercoated 1.2-4.0m, Au 0.76m (Contact) 861 = Ni Undercoated 1.2-4.0m, Au 0.25m (Contact) 41 Fine Pitch SMT Board to Board Connectors Series 5015 Mezzanine Card Connector 1.0mm Pitch RECEPTACLE Variation L STD 5.60 (0.220) 7.60 (0.299) 8.60 (0.339) 10.60 (0.417) H2 H3 H5 Mated Height 8.0 (0.315) 9.0 (0.354) 10.0 (0.394) 11.0 (0.433) 12.0 (0.472) 13.0 (0.512) 14.0 (0.551) 15.0 (0.591) Plug Receptacle STD STD H1 STD H2 STD H1 H2 H2 H2 H2 H3 H1 H5 H2 H5 MATED HEIGHT COMBINATIONS HOW TO ORDER 42 24 5015 064 X XX Prefix Series Number Number of Positions Variation Code 0 = Without Boss 1 = With Boss Type Code 00 = Standard 01 = H1 02 = H2 03 = H3 05 = H5 XXX Finish Code 863 = Ni Undercoated 1.2-4.0m, Au 0.76m (Contact) 861 = Ni Undercoated 1.2-4.0m, Au 0.25m (Contact)