NPPA-TT-E56 2 x 48 TT (Bantam) jacks, half normalled bottom row, 6x56 pole ELCO male connectors, individual grounding All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting. Features & Benefits * Innovative and compact patching system (just 1U high) * High quality long life gold plated Neutrik prewired * Mixed normalling configuration can be done by jack for 19" rack mounting double jacks with best contact integrity pairs (see accessories) NPPA-TT-E56 * Robustly housed in a black coated steel shell * Qualified for analog and digital signals acc. AES3, 48 * Flexible grounding system (see Assembly Instruction) kHz sampling frequency 1/2 Technical Information Product Title NPPA-TT-E56 Connection Type Patch Panel Electrical Signal Type Digital suitability acc. AES/EBU (3.072 Mb/s and 6.144 Mb/s) Contact resistance 20 m Contact resistance < 25 m Dielectric strength 1 kVdc Frequencyrange DC to > 50 MHz Insulation resistance > 1 G Channel separation > 100 dB @ 10 kHz, 600 terminated > 40 dB @ 6 MHz, 110 terminated Mechanical Insertion force < 10 N Withdrawal force >8N Lifetime > 5000 mating cycles Wiresize Locking device Retention spring Material Contact plating TRIBOR(R) (0.2 m AuCo over 2 m NiP) (Jacks) Contacts Bronze (CuSn6) (Jacks) Shell PA 66 blend (Jacks) Shell plating Black Front panel AlMgSi0.5 F22 Environmental Temperature range NPPA-TT-E56 -30 C to +80 C 2/2