MRA HT MPA HT CONDENSATEURS POLYESTER METALLISE HAUTE TENSION HIGH -VOLTAGE METALLIZED POLYESTER CAPACITORS CARACTERISTIQUES GENERALES Dielectrique Polyester metallise Technologie Autocicatrisable, non inductif Enrobe polyester Obture resine epoxy Option Pour utilisation dans l'huile Ref. : MRA HT H MPA HT H Les dimensions L, D, e, h sont augmentees de 2 mm GENERAL CHARACTERISTICS Temperature d'utilisation - 55C + 85C Operating temperature Dissipation factor at 1 kHz Tangente de l'angle de pertes a 1 kHz X 100.10 -4 Insulation resistance under 500 VDC Resistance d'isolement sous 500 VCC * pour CR X 0,33 F x 30000 M * for CR X 0,33 F * pour CR 0,33 F x 10 000 M.F * for CR 0,33 F 1,5 URC /1 mn Tension de tenue * X 10 kV * X 10 kV Withstand voltage 1,2 URC /1 mn * 10 kV * 10 kV MARQUAGE Autres caracteristiques voir page 10 Modele Capacite - Tolerance Tension nominale Date - Code For other characteristics see page 10 MRA HT sorties axiales / axial leads MARKING Model Capacitance - Tolerance Rated voltage Date - Code L e L h W W D Dielectric Metallized Polyester Technology Self-healing, non inductive Polyester wrapped Epoxy resin sealed Optional feature For application in oil Ref. : MRA HT H MPA HT H L, D, e, h dimensions are increased by 2 mm MPA HT sorties axiales / axial leads x 25 x 25 ! 32 x 32 L W +10% - 0,05 0,8 ! 32 x 32 L W +10% - 0,05 1 0,8 1 VALEURS DE CAPACITE ET DE TENSION CAPACITANCE VALUES AND RATED VOLTAGE Any intermediate value is made in the dimensions of the next higher value Toute valeur intermediaire est executee dans les dimensions de la valeur immediatement superieure 1 600 VCC 330 VCA 1 000 VCC 250 VCA Tension / Voltage URC Tension / Voltage URA 2 500 VCC 480 VCA 4 000 VCC 630 VCA 10 000 VCC 1 500 VCA 6 300 VCC 1 200 VCA 15 000 VCC 2 500 VCA D L e h D L e h D L e h D L e h D L e h D L e h D L e h 7 19 5 10 7 19 5 10 10 19 7 14 10 26 7 14 10 38 7 14 12 50 8 15 20 70 7 21 1,5 7 19 5 10 7 19 5 10 10 19 7 14 12 26 7 14 10 38 7 14 12 50 8 15 20 70 8 23 2,2 7 19 5 10 7 19 5 10 10 19 7 14 12 26 9 16 10 38 7 14 12 50 8 15 20 70 10 25 3,3 7 19 5 10 7 19 5 10 10 19 7 14 13 32 9 16 12 38 8 15 15 50 10 17 22 70 13 28 4,7 8 19 6 13 8 19 6 13 10 19 7 14 15 32 11 18 14 38 9 16 16 50 12 19 25 70 16 31 6,8 9 19 6 13 9 19 6 13 10,5 32 7 14 15 32 11 18 16 38 11 18 18 50 14 21 30 70 20 35 9 19 6 13 9 19 6 13 10 32 7 14 15 32 11 18 18 38 13 23 22 50 16 26 34 85 18 34 32 5 11 10 32 7 14 12 45 6 13 22 38 16 26 20 75 10 19 34 85 23 38 40 85 29 44 max 2 max max 1 nF 10 15 10 19 7 14 9 22 11 19 7 14 9 32 5 11 10 32 7 14 12 45 6,5 13,5 25 38 18 31 22 75 12 22 33 11 19 7 14 9 32 6 13 11 32 8 15 14 45 8 30 38 22 36 25 75 15 26 47 11 32 7 14 11 32 7 14 11 45 8 15 14 45 9,5 16,5 28 75 17 31 30 75 17 31 68 11 32 7 14 12 32 8 15 12 45 9 16 16 45 11,5 18,5 32 75 21 35 34 75 22 35 36 75 26 42 38 75 26 42 max 2 max max max 2 15 11 32 7 14 14 45 8 15 14 45 10 17 18 45 13 23 0,15 12 32 8 15 16 45 10 17 18 45 13 20 22 45 16 26 0,22 14 32 10 17 16 45 11 21 20 45 14 24 26 45 19 32 0,33 16 32 13 20 20 45 14 24 24 45 18 28 0,47 16 45 12 19 23 45 15 29 28 45 20 34 0,68 19 45 13 23 25 45 19 32 35 45 25 39 60 20 33 40 45 30 47 0,1 F 1 22 45 17 26 28 1,5 26 45 19 32 33 60 24 40 2,2 27 60 20 33 38 60 30 46 3,3 33 60 23 40 4,7 38 60 29 45 max 2 max max max 2 max max max 2 max max max 2 max max max max Tolerances sur capacite/Capacitance tolerances 20% 10% 5% Appellation commerciale MPA HT Type Option utilisation dans huile Capacite H 1 F Option feature Capacitance Application in oil Tolerance sur capacite Tension nominale ( VCC ) 20 % 1 600 V Capacitance tolerance Rated voltage ( VDC ) HOW TO ORDER E EXEMPLE DE CODIFICATION A LA COMMANDE 21