6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 1 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Features
• TIL11X series: TIL111, TIL117
• MCT2X series: MCT2, MCT2E
• High isolation voltage between input and output
Viso = 5000 Vrms
• Creepage distance >7.6mm
• Compact dual-in-line package
• Operating temperature up to +110°C
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approval (pending)
• NEMKO approved (No. P06206474)
• DEMKO approved (No. 313924)
• FIMKO approved (No. FI 22807)
• CSA approval (pending)
Description
The TIL11X series and MCT2X series contains an
infrared emitting diode optically coupled to a phototransistor.
It is packaged in a 6-pin DIP package and available in
wide-lead spacing and SMD option. Schematic
Applications
z Power supply regulators
z Digital logic inputs
z Microprocessor inputs
z Appliance system
z Industrial controls 1. Anode
2. Cathode
3. No Connection
4. Emitter
5. Collector
6. Base
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 2 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Absolute Maximum Ratings (Ta=25°C)
Parameter Symbol Rating Unit
Forward current IF 50 mA
Peak forward current (t = 10µs) IFM 1 A
Reverse voltage VR 6 V
70 mW
Input
Power dissipation
Derating factor (above 100°C) PD 3.8 mW/°C
150 mW
Collector power dissipation
Derating factor (above 100°C) PC 9.0 mW/°C
Collector-Emitter voltage VCEO 80 V
Collector-Base voltage VCBO 80 V
Output
Emitter-Collector voltage VECO 7 V
Total power dissipation Ptot 200 mW
Isolation voltage *2 V
iso 5000 Vrms
Operating temperature Topr -55~+110 °C
Storage temperature Tstg -55~+125 °C
Soldering temperature *3 T
sol 260 °C
Notes
*1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6
are shorted together.
*2 For 10 seconds.
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 3 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Electrical Characteristics
Input Parameter Symbol Min. Typ.* Max. Unit Condition
TIL111 - 1.22 1.4
IF = 16mA
- 1.2 1.4 0-70℃, IF = 16mA
- 1.32 - -55℃, IF = 16mA
TIL117 - 1.1 - 11℃, IF = 16mA
Forward voltage
MCT2
MCT2E
VF
- 1.23 1.5
V
IF = 20mA
Reverse current IR - - 10 µA
VR = 6V
Output Parameter Symbol Min. Typ.* Max. Unit Condition
Collector-Base
dark current ICBO - - 20 nA
VCB = 10V
All VCE = 10V, IF = 0mA
Collector-Emitter dark
current TIL117 ICEO - - 50 nA
VCE = 30V, IF = 0mA,
TA=70℃
Collector-Emitter
breakdown voltage BVCEO 80 - - V
IC = 1mA
Collector-Base
breakdown voltage BVCBO 80 - - V
IC = 0.01mA
Emitter-Collector
breakdown voltage BVECO 7 - - V
IE = 0.1mA
Transfer Characteristics
Parameter Symbol Min. Typ.* Max. Unit Condition
Collector current
(Phototransistor
operation) 2 - -
mA IF = 16mA ,VCE = 0.4V
Collector current
(Photodiode
operation)
TIL111 IC(ON) 7 - -
µA IF = 16mA ,VCB = 0.4V
TIL117 50 - -
IF = 10mA ,VCE = 10V
Current Transfer
Ratio MCT2
MCT2E CTR 20 - - % IF = 10mA ,VCE = 10V
＊1 Typical values at Ta=25℃
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 4 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Transfer Characteristics
Parameter Symbol Min. Typ.* Max. Unit Condition
All - - 0.4 IF = 16mA , IC = 2mA
Collector-Emitter
saturation voltage TIL117 VCE(sat) - - 0.4
V IF = 10mA , IC = 0.5mA
Isolation resistance RIO 1011 - - Ω VIO = 500Vdc
Input-output capacitance CIO - - 2 pF
VIO = 0, f = 1MHz
Turn-on time TIL117 Ton - 10 12
Turn-off time TIL117 Toff - 9 12
Rise time TIL117
TIL111 tr - 6 10
Fall time TIL117
TIL111 tf - 8 10
µs VCC = 10V,
IC = 2mA, RL = 100Ω
Turn-on time MCT2
MCT2E Ton - 3 -
Turn-off time MCT2
MCT2E Toff - 3 -
Rise time MCT2
MCT2E tr - 3 -
Fall time MCT2
MCT2E tf - 3 -
µs VCC = 10V,
IF = 10mA, RL = 100Ω
* Typical values at Ta = 25°C
Typical Performance Curves
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 5 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 6 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Figure 11. Switching Time Test Circuit & Waveforms
IF IC RL
RIN
RBE
VCC
Output
Input
Input
Pulse
10%
Output
Pulse 90%
t t
r
f
ton tof
f
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 7 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Order Information
Part Number
TIL11XY(Z)-V
or
MCT2XY(Z)-V
Note
X = Part no. for MCT2X series (E or none)
= Part no. for TIL11X series (1 or 7)
Y = Lead form option (S, S1, M or none)
Z = Tape and reel option (TA, TB or none).
V = VDE optional
Option Description Packing quantity
None Standard DIP-6 65 units per tube
M Wide lead bend (0.4 inch spacing) 65 units per tube
S (TA) Surface mount lead form + TA tape & reel option 1000 units per reel
S (TB) Surface mount lead form + TB tape & reel option 1000 units per reel
S1 (TA) Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel
S1 (TB) Surface mount lead form (low profile) + TB tape & reel option 1000 units per reel
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 8 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Package Drawings
(Dimensions in mm)
Standard DIP Type
Option M Type
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 9 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Option S Type
Option S1 Type
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 10 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Recommended pad layout for surface mount leadform
Device Marking
EL
TIL117
YWWV
Notes
EL denotes Everlight
TIL117 denotes Device Number
Y denotes 1 digit Year code
WW denotes 2 digit Week code
V denotes VDE optional
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 11 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Tape & Reel Packing Specifications
Tape dimensions
Option TA Option TB
Direction of feed from reel
Direction of feed from reel
Dimension No. A B Do D1 E F
Dimension (mm) 10.4±0.1 7.52±0.1 1.5±0.1 1.5+0.1/-0 1.75±0.1 7.5±0.1
Dimension No. Po P1 P2 t W K
Dimension (mm) 4.0±0.15 16.0±0.1 2.0±0.1 0.35±0.03 16.0±0.2 4.5±0.1
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 12 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
Solder Reflow Temperature Profile
260 °C
(p
eak
)
1
50
°
C
1-
3
°
C/Sec
M
a
x
7
0
–
17
0
S
ec
2
00
°
C
217°
C
>255 °C
(
30s Min
)
1-
3
°
C/Sec
M
a
x
6
0
–
14
0
S
ec
TIME
(S)
6 PIN DIP PHOTOTRANSISTOR
PHOTOCOUPLER
Everlight Electronics Co., Ltd. 13 http://www.everlight.com
Document No：PDS-ELST-117 Rev. 0 January 7, 2008
TIL11X Series
MCT2X Series
DISCLAIMER
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change
for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for use
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting
from use of the product which does not comply with the absolute maximum ratings and the instructions
included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in
any from is prohibited without the specific consent of EVERLIGHT.
