Ceramic Disc Capacitors NCD Series Class III SEMICONDUCTOR TYPE FEATURES * STABLE TEMPERATURE CHARACTERISTICS * HIGH VOLUMETRIC EFFICIENCY *See Part Number System for Details * ECONOMICALLY PRICED * AVAILABLE WITH FORMED LEADS AND ON TAPE FOR AUTOMATIC ..INSERTION SPECIFICATIONS Temperature Characteristics Operating Temperature Range Standard Tolerance Capacitance Change Over Temperature Range Dissipation Factor Insulation Resistance Working Voltage Range Dielectric Withstanding Voltage (Test Voltage) Test Conditions Y5R Y5S Y5T Y5V -30C ~ +85C 20% (M) 20% 22% -33% ~ +22 -82% ~ +20% Maximum 8% 12Vdc = 0.004Megohms 16Vdc = 1Megohm 12Vdc ~ 50Vdc 1.25 Times Rated Voltage For Not Less Than 1 Second, 50mA Maximum 1KHz, 0.5V 0.1Vrms, +25C PERCENT OF CAPACITANCE CHANGE (R) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 41 Ceramic Disc Capacitors Body Diameter 5 ~ 11 Standard Bulk 6.35 0.8 >12 6.35 0.8 Lead Spacing (mm) - S Standard Optional Bulk T&R mm (inches) 5.0 0.8 5.0 0.8 (0.2LS) 7.5 0.8 (0.295LS) 5.0 0.8 10.0 0.8 (0.395LS) NCD Series Class III Optional T&R mm (inches) 2.5 0.8 (0.1LS) 7.5 0.8 (0.295LS) 10.0 0.8 (0.395LS) Standard Low Voltage 500Vdc & Up 100Vdc & Below 2 max. 3 max. LEAD DIAMETER 0.6MM IS STANDARD 23 min. 23 min. BODY THICKNESS 2 ~ 4MM DEPENDENT ON CV S S NCD 104 M 16 Y5T J .1LS TR F RoHS compliant Optional Packaging TR = Taped and Reel TB = Tape and Box (Ammo) Optional Lead Space (LS) and/or Lead Length (LL) in inches Optional Lead Style C = Cut Lead D = Inside Kink (Short Leads) E = Outward Kink (Short Leads) J = Inside Kink (Long Leads) K = Outward Kink (Long Leads) Temperature Coefficient Working Voltage DC K Style J Style 5 max. 5 max. 1.5+0.2 1.5+0.2 23 min. 23 min. S S (BULK AND TAPED STYLES) Tolerance Code C = 0.25pF K = 10% D = 0.5pF M = 20% J = 5% Z = + 80% / - 20% Capacitance code, expressed in pfd, First two digits are significant, third digit is no. of zeros. "R" indicates decimal for under 10pfd. Series D Style E Style 5 max. 1.5+0.2 4.7 + 1 5 max. 1.5+0.2 S 4.7 + 1 S (BULK ONLY) STANDARD PRODUCTS AND MAXIMUM DIAMETER (mm) BY T.C. AND VOLTAGE Cap. (F) 0.01 0.022 0.033 0.047 0.068 0.1 0.22 Y5R/Y5S 12 6 7 7 9 10 10 - 16 6 7 7 9 10 10 - 25 6 7 7 9 10 10 - 50 6 7 7 9 10 12 - Y5T Working Voltage (Vdc) 12 16 25 50 6 6 6 6 7 7 7 8 7 7 7 9 7 7 7 9 8 8 8 12 10 10 10 12 - Y5V 12 5 6 6 6 7 7 10 16 5 6 6 6 7 7 10 25 5 6 6 6 7 7 10 50 5 6 7 7 7 8 - NIC RESERVES THE RIGHT TO REQUEST MINIMUM QUANTITIES ON CERTAIN VALUES (R) 42 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Ceramic Disc Capacitors DIMENSIONS (mm) Taping Specifications h P P2 T D P1 H1 S H L W d P0 Diameters up to 22mm max. are available on tape. P2 P D D T = 2 ~ 7mm DEPENDENT ON T.C. AND CV S H1 P1 H H0 L t W d P0 Symbol D max. d P* P0 Value 12.0 22.0 0.6 12.7 25.4 12.7 Tolerance --- +0.06 1.0 -0.05 0.2 P1 5.1 3.85 3.18 2.6 0.7 D P2 6.35 1.0 S 2.5 5.0 6.35 7.5 0.8 -0.2 H H0 H1 D W L t h 20.0 16.0 Max. 32.25 4.0 18.0 Max. 11.00 0.7 0 +1.5 -1.0 0.5 --- 0.2 0.5 --- 0.2 2.0 * -Dimension "P" is 12.7mm, for diameters up to 12mm, and 25.4mm for diameters 13-22mm. AMMO PACK H H 372 (14.64") L 377 (14.84") W 55 (2.16") REEL B L W D W Acceptable to standard radial type cartridge. D< = 354 (13.93") > B = 21 (.83") but < 30 (1.18") = W< = 55 (2.16") Acceptable to standard radial type cartridge with a few extra accessories. (R) NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 65