SN74LS283 4-Bit Binary Full Adder with Fast Carry The SN74LS283 is a high-speed 4-Bit Binary Full Adder with internal carry lookahead. It accepts two 4-bit binary words (A1-A4, B1-B4) and a Carry Input (C0). It generates the binary Sum outputs (1-4) and the Carry Output (C4) from the most significant bit. The LS283 operates with either active HIGH or active LOW operands (positive or negative logic). http://onsemi.com LOW POWER SCHOTTKY GUARANTEED OPERATING RANGES Symbol VCC Parameter Supply Voltage Min Typ Max Unit 4.75 5.0 5.25 V 0 25 70 C TA Operating Ambient Temperature Range IOH Output Current - High -0.4 mA IOL Output Current - Low 8.0 mA 16 1 PLASTIC N SUFFIX CASE 648 16 1 SOIC D SUFFIX CASE 751B 16 1 SOEIAJ M SUFFIX CASE 966 ORDERING INFORMATION Device Package Shipping SN74LS283N 16 Pin DIP 2000 Units/Box SN74LS283D SOIC-16 38 Units/Rail SN74LS283DR2 SOIC-16 2500/Tape & Reel SN74LS283M SOEIAJ-16 See Note 1 SN74LS283MEL SOEIAJ-16 See Note 1 1. For ordering information on the EIAJ version of the SOIC package, please contact your local ON Semiconductor representative. Semiconductor Components Industries, LLC, 2001 June, 2001 - Rev. 7 1 Publication Order Number: SN74LS283/D SN74LS283 CONNECTION DIAGRAM DIP (TOP VIEW) VCC B3 A3 3 A4 B4 4 C4 16 15 14 13 12 11 10 9 NOTE: The Flatpak version has the same pinouts (Connection Diagram) as the Dual InLine Package. 1 2 2 B2 3 A2 4 1 5 A1 6 B1 7 C0 8 GND LOADING (Note a) PIN NAMES A1 - A4 B1 - B4 C0 1 - 4 C4 Operand A Inputs Operand B Inputs Carry Input Sum Outputs Carry Output HIGH LOW 1.0 U.L. 1.0 U.L. 0.5 U.L. 10 U.L. 10 U.L. 0.5 U.L. 0.5 U.L. 0.25 U.L. 5 U.L. 5 U.L. NOTES: a) 1 TTL Unit Load (U.L.) = 40 A HIGH/1.6 mA LOW. LOGIC SYMBOL 5 3 14 12 6 2 15 11 A1 A2 A3 A4 B1 B2 B3 B4 7 C4 C0 1 2 3 4 4 1 13 10 VCC = PIN 16 GND = PIN 8 http://onsemi.com 2 9 SN74LS283 LOGIC DIAGRAM C0 A1 7 B1 5 A2 6 B2 A3 2 3 C1 4 1 VCC = PIN 16 GND = PIN 8 = PIN NUMBERS B3 A4 15 14 C2 2 11 C3 10 13 1 B4 12 3 9 C4 4 FUNCTIONAL DESCRIPTION The LS283 adds two 4-bit binary words (A plus B) plus the incoming carry. The binary sum appears on the sum outputs (1-4) and outgoing carry (C4) outputs. Due to the symmetry of the binary add function the LS283 can be used with either all inputs and outputs active HIGH (positive logic) or with all inputs and outputs active LOW (negative logic). Note that with active HIGH inputs, Carry Input can not be left open, but must be held LOW when no carry in is intended. C0 + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = 1 + 2 2 + 4 3 + 8 4 + 16C4 Where: (+) = plus Example: C0 A1 A2 A3 A4 B1 B2 B3 B4 1 2 3 4 C4 logic levels L L H L H H L L H H H L L H Active HIGH 0 0 1 0 1 1 0 0 1 1 1 0 0 1 (10+9=19) Active LOW 1 1 0 1 0 0 1 1 0 0 0 1 1 0 (carry+5+6=12) Interchanging inputs of equal weight does not affect the operation, thus C0, A1, B1, can be arbitrarily assigned to pins 7, 5 or 3. http://onsemi.com 3 SN74LS283 FUNCTIONAL TRUTH TABLE C (n-1) An Bn n Cn L L L L H H H H L L H H L L H H L H L H L H L H L H H L H L L H L L L H L H H H C1-C3 are generated internally C0 is an external input C4 is an output generated internally DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified) Limits Symbol Min Parameter VIH Input HIGH Voltage VIL Input LOW Voltage VIK Input Clamp Diode Voltage VOH Output HIGH Voltage VOL Output LOW Voltage IIH Max 2.0 0.8 -0.65 2.7 -1.5 3.5 Unit Test Conditions V Guaranteed Input HIGH Voltage for All Inputs V Guaranteed Input LOW Voltage for All Inputs V VCC = MIN, IIN = -18 mA V VCC = MIN, IOH = MAX, VIN = VIH or VIL per Truth Table 0.25 0.4 V IOL = 4.0 mA 0.35 0.5 V IOL = 8.0 mA C0 20 A Any A or B 40 A C0 0.1 mA Any A or B 0.2 mA C0 -0.4 mA Any A or B -0.8 mA Input HIGH Current IIL Input LOW Current IOS Short Circuit Current (Note 1) ICC Typ -20 VCC = MAX, MAX VIN = 2 2.7 7V VCC = MAX, MAX VIN = 7 7.0 0V VCC = MAX, MAX VIN = 0 0.4 4V -100 mA VCC = MAX Power Supply Current Total, Output HIGH 34 mA VCC = MAX Total, Output LOW 39 Note 1: Not more than one output should be shorted at a time, nor for more than 1 second. http://onsemi.com 4 VCC = VCC MIN, VIN = VIL or VIH per Truth Table SN74LS283 AC CHARACTERISTICS (TA = 25C, VCC = 5.0 V) Limits Typ Max Unit tPLH tPHL Propagation Delay, C0 Input to Any Output 16 15 24 24 ns tPLH tPHL Propagation Delay, Any A or B Input to Outputs 15 15 24 24 ns tPLH tPHL Propagation Delay, C0 Input to C4 Output 11 11 17 22 ns tPLH tPHL Propagation Delay, Any A or B Input to C4 Output 11 12 17 17 ns Symbol Parameter Min Test Conditions CL = 15 pF F Figures 1 & 2 AC WAVEFORMS VIN 1.3 V VIN tPHL VOUT tPLH 1.3 V tPLH 1.3 V 1.3 V VOUT Figure 1. Figure 2. http://onsemi.com 5 tPHL SN74LS283 PACKAGE DIMENSIONS N SUFFIX PLASTIC PACKAGE CASE 648-08 ISSUE R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. -A- 16 9 1 8 B F C DIM A B C D F G H J K L M S L S SEATING PLANE -T- K H G D M J 16 PL 0.25 (0.010) T A M M INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0 10 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0 10 0.51 1.01 D SUFFIX PLASTIC SOIC PACKAGE CASE 751B-05 ISSUE J -A- 16 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 9 -B- 1 P 8 PL 0.25 (0.010) 8 M B S G R K F X 45 C -T- SEATING PLANE J M D 16 PL 0.25 (0.010) M T B S A S http://onsemi.com 6 DIM A B C D F G J K M P R MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0 7 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0 7 0.229 0.244 0.010 0.019 SN74LS283 PACKAGE DIMENSIONS M SUFFIX SOEIAJ PACKAGE CASE 966-01 ISSUE O 16 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). LE 9 Q1 M E HE 1 8 L DETAIL P Z D e VIEW P A A1 b 0.13 (0.005) c M 0.10 (0.004) http://onsemi.com 7 DIM A A1 b c D E e HE L LE M Q1 Z MILLIMETERS MIN MAX --2.05 0.05 0.20 0.35 0.50 0.18 0.27 9.90 10.50 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 0 0.70 0.90 --0.78 INCHES MIN MAX --0.081 0.002 0.008 0.014 0.020 0.007 0.011 0.390 0.413 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 0 0.028 0.035 --0.031 SN74LS283 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 SN74LS283/D