https://www.phoenixcontact.com/us/products/2905236
04/13/2017Page2/5
Type 3 surge protection plug-PLT-SEC-T3-3S-230-P-2905236
Technical data
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 70 °C
Altitude ≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation) 5 % ... 95 %
Shock (operation) 30g (half sinus / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation) 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z)
General
IEC test classification III
T3
EN type T3
Mode of protection L-N
L-PE
N-PE
Mounting type On base element
Color light grey RAL7035
Housing material PA 6.6-FR 20% GF
PA 6.6-FR
Degree of pollution 2
Flammability rating according to UL 94 V-0
Design Male
Number of positions 4
Surge protection fault message optical
Protective circuit
Nominal voltage UN230/400V AC(TN-S)
230/400V AC(TT - only in use with RCD)
Nominal frequency fN50 Hz (60 Hz)
Maximum continuous voltage UC264 V AC
Residual current IPE ≤ 5 µA
Nominal discharge current In (8/20) µs 3 kA
Standby power consumption PC≤ 2 VA (at UREF)
≤ 2.2 VA (at UC)
Reference test voltage UREF 255 V AC
Combination wave UOC 6 kV
Voltage protection level Up (L-N) ≤ 1.4 kV
Voltage protection level Up (L-PE) ≤ 1.5 kV