NoMoreScrewingUpwithNoMoreScrewingUpwith
OMRON'sNewSocketOMRON'sNewSocket
Troublesome,time-consumingrelaywiringjobsareathingofthepast.Troublesome,time-consumingrelaywiringjobsareathingofthepast.
ScrewlessClampTerminalSocketforG2RSRelay
Troublesome,time-consumingrelaywiringjobsareathingofthepast.
NoMoreScrewingUpwith
OMRON'sNewSocket
“Screwless” means “Troublefree.”
The Result is More Time for Creative Jobs,
Quality Assurance, Safety and Reliability.
Unique 1-2-3-Step Wiring Procedure
without the need for tightening screws
1
23
Very Reliable Cable Connection
without the need for
additional tightening
Environment-Friendliness
using no Pb, Cd or Be
Instant Relay
Release Lever
for one-touch
dismounting
Double Wiring
with two independent
terminal units
Separate Terminal Design for Safety
Two Types of Nameplate Available
Convenient Socket Bridge for Group
Mounting
Production Facilities that meet ISO-9001
and ISO-14001 Standards
3
P2RF@@S Screwless Cla mp Termin al Socket
■Screwless clamping greatly contributes to reduc-
ing wiring time.
■No over or under tightening of cable connection
so better contact reliability is achieved.
■Double wiring possible on all the terminals, and
easy bridge and branch connections.
■Use either solid or standard wires from 0.2 to
1.5 mm2 (AWG24 to AWG16).
■Safe terminal arrangement: Coil terminals sepa-
rated from contact terminals.
■Unique ejector enables easy relay replacement.
■Two types of nameplate are available: New MY
and Legrand.
■Finger-protection construction.
■VDE, UL, CSA approval pending.
Ordering Information
Specifications
■Safety Standards
1-pole 2-pole
Socket P2RF-05-S P2RF-08-S
Clip & Release Lever P2CM-S
Nameplate R99-11 nameplate for MY
Socket Bridg e P2RM-S R, P2RM -SB
Item P2RF05S P2RF08S Remarks
Relay G2R-1-S Series G2R-2-S Series ---
Dimensions (W×H×D) 18×92×38.2 max. ---
Rated voltage 250 VAC ---
Rated carry current 10 A at 70°C 5 A at 70°C VDE0627
Applicable wires 0.2 to 1.5 mm2 (AWG24 to AWG16)
Solid wire, Standard wire ---
Number of wire connections 2 wires per terminal (1 wire per hole) ---
Clamping force 10 N min. (0.2 mm2), 40 N min. (1.5 mm2)EN60999
Standard File No. (status)
VDE0627 (IEC664, EN60999) Approval pending
UL508 (UL1059) Approval pending
CSA C22.2 No. 14 (CSA C22.2 No. 158) Approval pending
4
P2RF@@SP2RF@@S
Dimensions
32.6
27.6
22.6
24.5
35.4
92.0 max.
28.5
32.6
(5.3)
18.0 max.
6 TYP
16.8 TYP
61.3 TYP
38.2 max.
36.5 max.
P2RF-05-S
Standard model
Option (with ejector
and label attached)
Option (with ejector
and label attached)
32.6
27.6
22.6
24.5
35.4
60.5 TYP
(3.4)
92.0 max.
28.6
32.6
(5.3)
18.0 max.
6 TYP
16.8 TYP
38.2 max.
36.5 max.
P2RF-08-S
Standard model
Option (with ejector
and label attached)
Option (with ejector
and label attached)
5
P2RF@@SP2RF@@S
■Terminal Arrangement
■Mounting Height (With Lever)
Accessories (Option)
Note: 1. The relationship between the model number, the
length L, and the color of the insulating coating is
shown in the following table.
2. The insulating coating must be able to withstand a volt-
age of 3,000 V for 1 minute. Use either PE or PA as the
material of the insulating coating.
3. The positions of the ends of the insulating coating must
not vary more than 0.5 mm.
4. The characteristics of the socket bridge are shown in
the following table.
11
14
12
A1 A2
Common contacts 11
14
12
A1 A2
21
24
22
Make contacts
Break contacts
Coils
P2RF-05-S P2RF-08-S
61.6 typ.
28.6
56.9
(5.30)
60.6 typ.
28.6
(5.30)
55.7
P2RF-05-S P2RF-08-S
Socket Bridge
Insulating coating
1.2 dia. conductor L
(See note 1.)
914
Model number Length L (mm) Color of
insulating
coating
P2RM-SR 14.3 Red
P2RM-SB Blue
Item Characteristic
Rated ON current 10 A
Rated insulation voltage 250 VAC
Temperature rise 35°C max.
Dielectric strength 3,000 VAC for 1 minute
Ambient operating temper-
ature −55 to 70°C
6
P2RF@@SP2RF@@S
Clip and Release Lever
Installation
■Tools
A flat-blade screwdriver should be used to mount the cables.
Applicable Screwdriver
● Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
Examples: FACOM AEF.2.5×75E (AEF. 3×75E)
VESSEL No. 9900-(-)2.5×75 (No. 9900-(-)3×100)
WA GO 210-119
WIHA 260/2.5×40 (260/3×50)
*Chamfering the tip of the driver improves insertion when used as
an exclusive tool.
■Applicable Wires
Applicable Wire Sizes
0.2 to 1.5 mm2, AWG24 to AWG16
Applicable Wire Type
Solid wires, standard wires, flexible wires, or wires with ferules
can be used.
(See note 1.) < 2.2 ≤ Diameter D (mm) ≤ 3.2 (3.5: see note 2.)
Conductor diameter d (mm) or length of sides a and b (mm) ≤ 1.9
Note: 1. If the overall diameter of the wire is less than 2.2 mm,
do not insert the wire past the conductor. Refer to th e
following diagrams.
2. If the overall diameter of the wire is ov er 3.2 mm, it will
be difficult to use double wiring.
16.8 TYP
40.1 TYP
36 TYP
(4.0)
(32.0)
3 TYP
6 TYP
● Flat-blade, Parallel-tip
● Flat-blade, Flared-tip
2.5 dia. (3.0 mm max.)
Cannot be used.
Wires with Ferules
7
P2RF@@SP2RF@@S
Examples of Applicable Wires (Confirmed Using Catalog Information)
■Wiring
Use wires of the applicable sizes specified above. The length of
the exposed conductor should be 8 to 9 mm.
Use the following wiring procedure.
1. Insert the specified screwdriver into the release hole
located beside the wire connection hole where the wire is to
be inserted.
2. Insert the exposed conductor into the wire connection hole.
3. Pull out the screwdr iver.
Type of wire Conductor type See note 1, above. Recommended wire
sizes See note 2, above.
Equipment wire 2491X Flexible 0.5, 0.75, 1.0 mm21.5 mm2
BS6004 Solid 0.5 mm2
Switchgear BS6231 Solid 1.0 mm21.5 mm2
Switchgear BS6231 Flexible 0.5, 0.75 mm21.0 mm2
Tri-rated control and switchgear Flexible 0.5, 0.75, 1.0, 1.5 mm2
Conduit Standard 1.5 mm2
UL1007 Flexible 18AWG 16AWG
UL1015 Flexible 18AWG, 16AWG
UL1061 Flexible 18AWG
UL1430 Flexible 18AWG 16AWG
8 to 9 mm
Fig. 1 Exposed Conductor Length
Wire connection holes
Fig. 2 Wire Connection Holes and Release Holes
Release holes
Wire connection hole
Fig. 3 Section A-A of Fig. 2
Release hole
Screwdriver
Insert
Insert
Pull out
8
P2RF@@SP2RF@@S
Precautions
Precautions for Connection
• Do not move the screwdriver up, down, or from side to side while
it is inserted in the hole. Doing so may cause damage to internal
components (e.g. , deformation of the clamp spring or cra cks in
the housing) or cause deterioration of insulation.
• Do not insert the screwdriver at an angle. Doing so may break
the side of socket and result in a sort-circuit.
• Do not insert two or more wires in the hole. Wires may come in
contact with the spring c ausing a temperatu re rise or be s ubject
to sparks. (There are two wiring holes for each terminal.)
• Insert the screwdriver along the hole wall as shown below.
• If lubricating liquid, such as oil, is present on the tip of screwdriv-
er, the screwdriver may fall out resulting in injury to the operator.
• Insert the screwdriver into the bottom of th e hole. It may not be
possible to connect cables properly if the screwdriver is inserted
incorrectly.
General Precautions
• Use the clip to prevent relays floating or falling out of the socket.
• Do not use the product if it has been dropped on the ground.
Dropping the product may adversely affect performance.
• Confirm that the socket is securely attached to the mounting
track before wiring. If the socket is mounted insecurely it may fall
and injure the operator.
• Ensure that the socket is not charged during wiring and mainte-
nance. Not doing so may result in electric shock.
• Do not pour water or cleans ing agents on t he produc t. Doing s o
may result in electric shock.
• Do not use the socket in locations subject to solvents or alkaline
chemicals.
• Do not use the socket in locations subject to ultraviolet light (e.g.,
direct sunlight). Doing so may result in markings fading, rust, cor-
rosion, or resin deterioration.
• Do not dispose of the product in fire.
Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of
screwdriver in the fixture rail, and move it in the direction shown
below.
Screwdriver
Terms and Conditions of Sale
1. Offer ; Acceptance. These ter ms and conditions (these "Terms") are deemed
par t of all quotations, acknowledgments, invoices, purchase orders and other
documents, whether electronic or in writing, relating to the sale of products or
services (collectively, the "Products") by Omron Electronic Components LLC
("Seller"). Seller hereby objects to any terms or conditions proposed in
Buyer's purchase order or other documents which are inconsistent with, or in
addition to, these Terms.
2. Prices; Payment. All prices stated are current, subject to change without
notice by Seller. Buyer agrees to pay the price in effect at time of shipment.
Payments for Products received are due net 30 days unless otherwise stated
in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-
lars, Buyer shall make remittance to Seller at the then current exchange rate
most fa vorab le to Seller and which is available on the due date; provided that if
remittance is not made when due, Buyer will convert the amount to U.S. dol-
lars at the then current exchange rate most favorable to Seller available during
the period between the due date and the date remittance is actually made.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Products sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
7. Financial. If the financial position of Buyer at an y time becomes unsatisf actory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any rel ated ag reement, Seller ma y (witho ut liabili ty
and in addition to other remedies) cancel any unshipped portion of Products
sold hereunder and stop any Products in transit until Buyer pays all amounts,
including amounts payable hereunder, whether or not then due, which are
owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including ear thquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
1. Shipments shall be by a carrier selected by Seller;
2. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
3. All sales and shipments of Products shall be FOB shipping point (unless
otherwise stated in writing by Seller), at which point title to and all risk of
loss of the Products shall pass from Seller to Buyer, provided that Seller
shall retain a security interest in the Products until the f ull purchase price is
paid by Buyer;
4. Delivery and shipping dates are estimates only.
5. Seller will package Products as it deems proper for protection against
normal handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Products occurring before deliver y to the carrier must be presented in writing
to Seller within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Seller in the condition claimed.
12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that th
e
Products will be free from def ects in ma terials and workmanship for a period
of
twelve months from the date of sale by Seller (or such other period expresse
d
in writing by Seller). Seller disclaims all other warranties, express or implie
d.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATIO
N,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABI
L-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT
S.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT TH
E
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THE
IR
INTENDED USE. Seller further disclaims all warranties and responsibility
of
any type f or cl aim s or expenses based on infringement by the Products or ot
h-
erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole ob
li-
gation hereunder shall be to replace (in the form or iginally shipped with Buy
er
responsible for labor charges for removal or replacement thereof) the no
n-
complying Product or, at Seller's election, to repay or credit Buyer an amou
nt
equal to the purchase price of the Product; provided that in no event sh
all
Seller be responsible for warranty, repair, indemnity or any other claims
or
expenses regarding the Products unless Seller's analysis confirms that th
e
Products were properly handled, stored, installed and maintained and not su
b-
ject to contamination, abuse, misuse or inappropriate modification. Return
of
any Products by Buyer must be approved in writing by Seller before shipmen
t.
Seller shall not be liable for the suitability or unsuitability or the results from th
e
use of Products in combination with any electrical or electronic component
s,
circuits, system assemblies, or any other materials or substances or enviro
n-
ments. Any advice, recommendations or information given orally or in writin
g
are not to be construed as an amendment or addition to the above warranty.
13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIA
L,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS O
F
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON
-
NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED
IN
CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further,
in
no event shall liability of Seller exceed the individual price of the Product o
n
which liability is asserted.
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates an
d
its employees from and against all liabilities, losses, claims, costs an
d
expenses (including attorney's fees and expenses) related to any claim, inve
s-
tigation, litigation or proceeding (whether or not Seller is a par ty) which arise
s
or is alleged to arise from Buyer's acts or omissions under these Terms or
in
any w ay with respect to the Products . Without limiting the foregoing, Buy er (
at
its own expense) shall indemnify a nd hold h armless Seller and def end or sett
le
any action brought against Seller to the extent that it is based on a claim th
at
any Product made to Buyer specifications infringed intellectual property righ
ts
of another party.
15. Property; Confidentiality. The intellectual property embodied in the Products
is
the exclusive property of Seller and its affiliates and Buyer shall not attempt
to
duplicate it in any way without the written permission of Seller. Notwithstan
d-
ing any charges to Buyer for engineering or tooling, all engineering and toolin
g
shall remain the e xclusive property of Seller. All i nformation and materials su
p-
plied by Seller to Buyer relating to the Products are confidential and prop
ri-
etary, and Buyer shall limit distribution thereof to its trusted employees an
d
strictly prevent disclosure to any third party.
16. Miscellaneous. (a) Waive r. No failure or delay by Seller in exercising any rig
ht
and no course of dealing between Buyer and Seller shall operate as a waiv
er
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereund
er
without Seller's written consent. (c) Law. These Terms are governed by I
lli-
nois law (without regard to conflict of law principles). Federal and state cour
ts
in Illinois shall have exclusive jurisdiction for any dispute hereunde
r.
(d) Amendment. These Terms constitute the entire agreement between Buy
er
and Seller relating to the Products, and no provision may be changed
or
waiv ed unless in writing signed b y the parties. (e) Se v erabili ty. If any provisio
n
hereof is rendered ineffective or invalid, such provision shall not invalidate an
y
other provision. (f) Setoff. Buyer shall have no right to set off any amoun
ts
against the amount owing in respect of this invoice.. (g) Definitions. As use
d
herein, "including" means "including without limitation".
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any stan-
dards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will pro-
vide applicable th ird party certification documents identifying r atings an d limita-
tions of use which apply to the Product. This information by itself is not
sufficient f or a complete determination of the suitability of the Product i n combi-
nation with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the partic-
ular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a non-
exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii)Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to
separate industry or government regulations.
(iii)Use in consumer products or any use in significant quantities.
(iv)Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibi tio ns of use appli ca ble to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DES IGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's
programming of a programmable product, or any consequence thereof.
3. Perf ormance Data. Performance data given in this pub lica tion is pro vided a
s a
guide for the user in determining suitability and does not constitute a warran
ty.
It may represen t the re sult of Seller's test conditions, and the users must cor
re-
late it to actual application requirements. Actual performance is subject
to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may
be
changed at any time based on improvements and other reasons. It is our pra
c-
tice to change part numbers when published ratings or features are change
d,
or when significant construction changes are made. However, some specific
a-
tions of the Product may be changed without any notice. When in doubt, sp
e-
cial part numbers may be assigned to fix or estab lish k e y specifications f or y o
ur
application. Please consult with your Seller representative at any time to co
n-
firm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefu
lly
checked and is believed to be accurate; however, no responsibility is assum
ed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance . Where indica ted, our products currently comply, to the b
est
of our knowledge as of the date of thi s publication, with the requirements of t
he
European Union's Directive on the Restriction of certain Hazardous Su
b-
stances ("RoHS"), although the requirements of RoHS do not take effect u
ntil
July 2006. These requirements may be subject to change. Please consult o
ur
website for current information.
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Canada - http://www.omron.ca
Cat. No. J132-E1-01 Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
11/05 Specifications subject to change without notice
Complete “Te rms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.components.omron.com – under the “About Us” tab, in the Legal Matte rs section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
