15KP22 thru 15KP280CA, e3 15,000 W TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION APPEARANCE These Microsemi 15 kW Transient Voltage Suppressors (TVSs) are designed for applications requiring protection of voltage-sensitive electronic devices that may be damaged by harsh or severe voltage transients including lightning per IEC61000-4-5 and class levels with various source impedances described herein. This series is generally available in 22 to 280 volt standoff voltages (VWM) in both unidirectional and bi-directional offered in two different package designs for axial and radial configurations. Consult factory for availability of the 17 and 18 Volt devices on a special order basis. Microsemi also offers numerous other TVS products to meet higher or lower power demands and special applications. CASE 5A (DO-204AR) CASE 5R IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES APPLICATIONS / BENEFITS * Available in both Unidirectional and Bidirectional construction (Bidirectional with C or CA suffix) * Available in both axial-leaded and radial packages (include R prefix in part number for radial package option shown in figure as "case 5R," e.g. R15KP22A) * Selections for 22 to 280 volt standoff voltages (VWM) * Suppresses transients up to 15 kW @ 10/1000 s and 100 kW @ 8/20 s (see Figure 1) * Optional 100% screening for avionics grade is available by adding MA prefix to part number for added 100% o o temperature cycle -55 C to +125 C (10X) as well as surge (3X) and 24 hours HTRB with post test VBR & ID (in the operating direction for unidirectional or both directions for bidirectional) * Options for screening in accordance with MIL-PRF-19500 for JANTX are available by adding MX prefix respectively to the part numbers. * Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B * RoHS Compliant devices available by adding "e3" suffix * Protection from switching transients and induced RF * Fast response * Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 * Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1,2,3,4: 15KP22A - 15KP280A or CA Class 5: 15KP22A - 15KP280A or CA (short distance) Class 5: 15KP22A - 15KP110A or CA (long distance) * Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 & 2: 15KP22A to 15KP280A or CA Class 3: 15KP22A to 15KP240A or CA Class 4: 15KP22A to 15KP120A or CA * Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: 15KP22A to 15KP220A or CA Class 3: 15KP22A to 15KP110A or CA Class 4: 15KP22A to 15KP54A or CA MAXIMUM RATINGS MECHANICAL AND PACKAGING Copyright (c) 2009 9-25-2009 rev. L, SD4A * * * * * * * CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 FINISH: Tin-Lead or RoHS compliant annealed matte-Tin plating readily solderable per MIL-STD750, method 2026 MARKING: Body marked with part number POLARITY: Band denotes cathode for the axialleaded package and a dot denotes cathode terminal for the radial package. Bidirectional not marked for polarity WEIGHT: 1.5 grams (approximate) TAPE & REEL option: Standard per EIA-296 for axial package (add "TR" suffix to part number) See package dimension on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 15KP22-15KP280CA, e3 * Peak Pulse Power dissipation at 25 C: 15,000 watts at 10/1000 s (also see Figures 1 and 2) * Impulse repetition rate (duty factor): 0.05% * tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional * Operating and Storage temperature: -65C to +150C * Thermal resistance: 20C/W junction to lead, or 80C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm o * Steady-State Power dissipation: 6 watts at TL = 30 C, or 1.56 watts at TA = 25C when mounted on FR4 PC board described for thermal resistance * Forward Surge: 200 Amps 8.3 ms half-sine wave for unidirectional devices only * Solder temperatures: 260 C for 10 s (maximum) WWW . Microsemi .C OM DESCRIPTION 15KP22 thru 15KP280CA, e3 15,000 W TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION MICROSEMI PART NUMBER (Note 2) REVERSE STAND-OFF VOLTAGE VWM (Note 1) Copyright (c) 2009 9-25-2009 rev. L, SD4A VOLTS VOLTS 22 22 24 24 26 26 28 28 30 30 33 33 36 36 40 40 43 43 45 45 48 48 51 51 54 54 58 58 60 60 64 64 70 70 75 75 78 78 85 85 90 90 100 100 110 110 120 120 130 130 150 150 160 160 24.4 24.4 26.7 26.7 28.9 28.9 31.1 31.1 33.3 33.3 36.7 36.7 40.0 40.0 44.4 44.4 47.8 47.8 50.0 50.0 53.3 53.3 56.7 56.7 60.0 60.0 64.4 64.4 66.7 66.7 71.1 71.1 77.8 77.8 83.3 83.3 86.7 86.7 94.4 94.4 100 100 111 111 122 122 133 133 144 144 167 167 178 178 mA 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM STANDBY CURRENT ID @ VWM VOLTS A A MAXIMUM VOLTAGE TEMPERATURE VARIATION V(BR) mV/ C 41.1 37.1 45.0 40.7 48.7 44.0 52.4 47.5 56.2 50.7 60.6 54.8 66.0 59.7 72.8 65.8 77.1 69.7 80.7 73.0 85.9 77.7 91.5 82.8 96.8 87.5 104.0 94.0 107.0 97.3 115 104 126 114 135 122 140 126 152 137 160 146 179 162 196 178 214 193 231 209 268 243 287 259 500 500 150 150 50 50 25 25 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 365 404 333 369 308 341 286 316 267 296 248 274 227 251 206 228 195 215 186 205 175 193 164 181 155 171 144 160 140 154 130 144 119 132 111 123 107 119 99 109 94 103 84 93 77 84 70 78 65 72 56 62 52 58 27 24 30 27 32 29 35 31 27 34 42 38 46 41 51 46 55 50 57 52 62 56 66 60 70 63 76 68 78 71 84 76 92 83 100 89 104 93 113 102 120 109 134 121 147 133 161 145 174 157 202 183 216 195 MAXIMUM CLAMPING VOLTAGE VC @ IPP MAXIMUM PEAK PULSE CURRENT IPP (FIG. 2) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 15KP22-15KP280CA, e3 15KP22 15KP22A 15KP24 15KP24A 15KP26 15KP26A 15KP28 15KP28A 15KP30 15KP30A 15KP33 15KP33A 15KP36 15KP36A 15KP40 15KP40A 15KP43 15KP43A 15KP45 15KP45A 15KP48 15KP48A 15KP51 15KP51A 15KP54 15KP54A 15KP58 15KP58A 15KP60 15KP60A 15KP64 15KP64A 15KP70 15KP70A 15KP75 15KP75A 15KP78 15KP78A 15KP85 15KP85A 15KP90 15KP90A 15KP100 15KP100A 15KP110 15KP110A 15KP120 15KP120A 15KP130 15KP130A 15KP150 15KP150A 15KP160 15KP160A MINIMUM BREAKDOWN VOLTAGE V(BR) @ I(BR) WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Page 2 15KP22 thru 15KP280CA, e3 15,000 W TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION REVERSE STAND-OFF VOLTAGE VWM (Note 1) 15KP170 15KP170A 15KP180 15KP180A 15KP200 15KP200A 15KP220 15KP220A 15KP240 15KP240A 15KP260 15KP260A 15KP280 15KP280A MINIMUM BREAKDOWN VOLTAGE V(BR) @ I(BR) VOLTS VOLTS 170 170 180 180 200 200 220 220 240 240 260 260 280 280 189 189 200 200 222 222 245 245 267 267 289 289 311 311 mA 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM CLAMPING VOLTAGE VC @ IPP MAXIMUM STANDBY CURRENT ID @ VWM VOLTS A A MAXIMUM VOLTAGE TEMPERATURE VARIATION V(BR) mV/ C 304 275 321 291 356 322 393 356 428 388 464 419 500 452 10 10 10 10 10 10 10 10 10 10 10 10 10 10 49 55 47 52 42 47 38 42 35 39 32 36 30 33 229 207 242 219 269 243 297 269 324 293 352 317 378 342 MAXIMUM PEAK PULSE CURRENT IPP (FIG. 2) WWW . Microsemi .C OM MICROSEMI PART NUMBER (Note 2) NOTE 1: Transient Voltage Suppressors are normally selected with reverse "Standoff Voltage" VWM which should be equal to or greater than the dc or continuous peak operating voltage level. NOTE 2: For bidirectional construction, indicate a C or CA suffix after the part number. ** Consult factory for availability of the 17 and 18 Volt devices on a special order basis. SYMBOLS & DEFINITIONS Definition Symbol Symbol VWM PPP V(BR) ID Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current IPP VC I(BR) Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) GRAPHS tp - Pulse Time - sec FIGURE 1 Peak Pulse Power vs. Pulse Time to 50% of Exponentially Decaying Pulse Copyright (c) 2009 9-25-2009 rev. L, SD4A 15KP22-15KP280CA, e3 PPP Peak Pulse Power - kW Waveform Non-Repetitive Test waveform parameters: tr=10 s, tp=1000 s FIGURE 2 Pulse Waveform Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 15KP22 thru 15KP280CA, e3 15,000 W TRANSIENT VOLTAGE SUPPRESSOR SCOTTSDALE DIVISION C - CAPACITANCE-PICOFARADS Peak Pulse Power (PPP) or continuous o Power in Percent of 25 C Rating WWW . Microsemi .C OM o V(BR) - BREAKDOWN VOLTAGE-VOLTS TL Lead Temperature C FIGURE 3 Typical Capacitance vs. Breakdown Voltage FIGURE 4 Derating Curve NOTE: For Bidirectional Construction, indicate a C or CA suffix after part number. Capacitance will be one-half that shown in Figure 3. PACKAGE DIMENSIONS 15KP22-15KP280CA, e3 CASE 5A CASE 5R NOTE: Dimensions are in inches. Copyright (c) 2009 9-25-2009 rev. L, SD4A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4