AL102A Advance Information
2/2000 Reference Only / Allayer Confidential 2
AL102A Overview
The AL102A provides eight 10/100 Mbit/s Ethernet ports. Each port supports both 10 and 100
Mbit/s data rate. The operation mode is auto-negotiated by the PHY. All ports are full-duplex
capable. The device supports VLAN for workgroup and segment switching applications.
The AL102A also supports trunking applications. The chip provides two optional load balancing
schemes, explicit and dynamic. Wi th trunking, it is possible to group up to four full-duplex links
together to form a single 800 Mbit/s link.
Data received from the MAC interface is stored in the external memory buffer. The AL102A
utilizes c ost effective SGRAM to provide 8-Mbit or 16-Mbit of buffer memory.
During transmission, the data is obtained from the buffer memory and routed to the destination
port. In the event of a collision during half-duplex operations, the MAC control will back off and
retransmit in accordance to the IEEE 802.3 specification.
The AL102A provides two flo w control methods. F or half-duplex operations, an optional jamming
based flow control (also known as backpressure) is available to prevent loss of data. With this
method of flow control, the switch will generate a jam signal when the receive-buffer is full. The
sending station will not transmit until the line is clear.
In the full-duplex mode, AL102A utilizes IEEE 802.3x as the flow control mechanism.
All ports support multiple MAC addresses. The switch chip supports up to 1K MAC addresses
internally. These MAC addresses are shared among all eight ports.
The initialization and configuration of the switch is programmed by an external EEPROM. For an
unmanaged switch design, a CPU is not required. Field reconfiguration can be achieved by using a
parallel interface to reprogram the EEPROM.
The AL102A supports port-based VLAN. The VLAN register set is used to configure the
destination ports for multicast and broadcast frames.
The device also provides two levels of security for intrusion protection. Security can be
implem ente d o n a per por t basis .
The AL102A operates only in the store and forward mode. The entire frame is checked for error.
Frames with errors are automatically filtered and will not be forwarded to the destination port.
Other features include port monitoring and broadcast storm throttling.