MBA/SMA 0204 HF Vishay Beyschlag High Frequency Thin Film Leaded Resistors FEATURES * Speciality product for RF applications MBA/SMA 0204 HF leaded thin film resistors for RF applications are the perfect choice in high frequency circuit designs; where the impedance change due to the parasitic inductance of regular and professional resistors can not be accepted. Typical applications are in the fields of telecommunication equipment and industrial electronics. * * * * * Low-inductance non-helical trimmed product Suitable for more than 3 GHz Resistance range: 1.5 to 470 Lead (Pb)-free solder contacts Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Compliant to RoHS directive 2002/95/EC APPLICATIONS METRIC SIZE * Telecommunication equipment DIN * Industrial electronics CECC 0204 A TECHNICAL SPECIFICATIONS DESCRIPTION MBA/SMA 0204 HF CECC Size A 1.5 to 470 Resistance Range Resistance Tolerance 1 %; 2 % Temperature Coefficient 50 ppm/K Operation Mode Long term Standard Climatic Category (LCT/UCT/Days) 55/125/56 55/155/56 0.25 W 0.4 W Rated Dissipation, P70 Limited by P70 Operating Voltage, Umax. AC/DC 125 C Film Temperature Max. Resistance Change at P70 for Resistance Range, R/R max., After: 155 C 1.5 to 470 1000 h 0.25 % 0.5 % 8000 h 0.5 % 1.0 % 225 000 h 1.5 % - Permissible Voltage Against Ambient: 1 Minute; Uins Continuous Failure Rate 300 V 75 V 0.7 x 10- 9/h Note * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. www.vishay.com 158 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28769 Revision: 16-Oct-09 MBA/SMA 0204 HF High Frequency Thin Film Leaded Resistors Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: MBA0204AC5109GCT00 M B A 0 2 0 4 A C 5 1 0 9 G C T 0 0 MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (1) SPECIAL MBA0204 = MBA/SMA 0204 A = HF High Frequency C = 50 ppm 3 digit value 1 digit multiplier MULTIPLIER 8 = *10- 2 9 = *10- 1 0 = *100 F = 1.0 % G = 2.0 % CT C1 RP 00 = Standard PRODUCT DESCRIPTION: MBA/SMA 0204-50 2 % HF CT 51R0 MBA/SMA 0204 - 50 2% HF CT 51R0 MODEL/SIZE TCR TOLERANCE VARIANT PACKAGING (1) MBA/SMA 0204 50 ppm 1.0 % 2.0 % HF CT C1 RP RESISTANCE VALUE 51R0 = 51 Notes (1) Please refer to table PACKAGING for complete information * The PART NUMBER shown above is to facilitate the unified part numbering system for ordering products PACKAGING REEL MODEL MBA/SMA 0204 BOX PIECES CODE PIECES CODE 5000 RP 1000 5000 C1 CT DIMENSIONS D L M I I d DIMENSIONS - leaded resistor types, mass and relevant physical dimensions TYPE MBA/SMA 0204 HF Dmax. (mm) Lmax. (mm) dnom. (mm) Imin. (mm) Mmin. (mm) MASS (mg) 1.6 3.6 0.5 29.0 5.0 125 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE RESISTANCE VALUE (2) DESCRIPTION TCR TOLERANCE MBA/SMA 0204 HF 50 ppm/K 1 %; 2 % 1.5 to 470 ; 50 Note (2) Resistance values to be selected for 1 % from the E24/E96 series and for 2 % from E24 series Document Number: 28769 Revision: 16-Oct-09 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 159 MBA/SMA 0204 HF Vishay Beyschlag High Frequency Thin Film Leaded Resistors DESCRIPTION Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body (85 % Al2O3) and conditioned to achieve the desired temperature coefficient. Nickel plated steel termination caps are firmly pressed on the metallised rods. A special laser is used to achieve the target value by smoothly cutting a low-inductivity non-helical groove in the resistive layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. The resistors are covered by protective coating designed for electrical, mechanical and climatic protection.The terminations receive a final pure tin on nickel plating. Four colour code rings designate the resistance value and tolerance in accordance with IEC 60062. Additional black dots near the 3rd colour ring identify the special HF product. The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1. ASSEMBLY The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth has been proven under extensive testing. All products comply with GADSL (1) and the CEFIC-EECA-EICTA (2) list of legal restrictions on hazardous substances. This includes full compatibility with the following directives: * 2000/53/EC End of Vehicle Life Directive (ELV) and Annex II (ELVII) * 2002/95/EC Restriction of the Substances Directive (RoHS) use of Hazardous * 2002/96/EC Waste Electrical and Electrical Equipment Directive (WEEE) APPROVALS Where applicable, the resistors are tested in accordance with CECC 40101-806 which refers to EN 60115-1 and EN 140100. Vishay Beyschlag has achieved "Approval of Manufacturer" in accordance with IEC QC 001002-3, clause 2. The release certificate for "Technology Approval Schedule" in accordance with CECC 240001 based on IEC QC 001002-3, clause 6 is granted for the Vishay Beyschlag manufacturing process. Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=1053&id_article=340 Power Dissipation P FUNCTIONAL PERFORMANCE 1 MBA/SMA 0204 HF W 0. 5 0 - 50 0 Derating - Standard Operation www.vishay.com 160 5 0 70 100 C 150 Ambient Temperature amb For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28769 Revision: 16-Oct-09 MBA/SMA 0204 HF Power Dissipation P High Frequency Thin Film Leaded Resistors 1 Vishay Beyschlag MBA/SMA 0204 HF W 0. 5 0 - 50 0 5 0 70 150 C Ambient Temperature amb Rise of the Surface Temperature Temperature Rise Tr 100 MBA/SMA 0204 HF 80 K 60 40 20 0 0 0.1 0.2 0.4 0.3 0.5 0.6 0.7 W IZI/R Temperature Rise 0.8 Load P 2.0 27 6.8 ., 1.5 50 1.0 100 220 470 0.5 0.1 0.3 RF - Behaviour Document Number: 28769 Revision: 16-Oct-09 1 10 GHz |Z|/R for MBA/SMA 0204 HF Frequency f For technical questions, contact: filmresistorsleaded@vishay.com 20 www.vishay.com 161 MBA/SMA 0204 HF Vishay Beyschlag High Frequency Thin Film Leaded Resistors TESTS AND REQUIREMENTS Essentially all tests are carried out in accordance with the following specifications: EN 60115-1, generic specification (includes tests) Unless otherwise specified the following values apply: Temperature: 15 C to 35 C Relative humidity: 45 % to 75 % EN 140100, sectional specification (includes schedule for qualification approval) Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). CECC 40101-806, detail specification (includes schedule for conformance inspection) For testing the components are mounted on a test board in accordance with IEC 60115-1, 4.31 unless otherwise specified. The following table contains the applicable tests selected from the documents listed above. The tests are carried out in accordance with IEC 60068-xx test method and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid. In the Test Procedures and Requirements table only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2 test methods. A short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2-xx TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R max.) Stability for product types: 1.5 to 470 MBA/SMA 0204 HF 4.5 4.8 - Resistance - Temperature coefficient - Endurance at 70 C: standard operation mode 4.25.1 - 4.25.3 4.24 - 78 (Cab) 4.23.3 50 ppm/K U = P 70 x R or U = Umax.; 1.5 h ON; 0,5 h OFF 70 C; 1000 h (0.5 % R + 0.05 ) 70 C; 8000 h (1 % R + 0.1 ) U = P 70 x R or U = Umax.; 1.5 h ON; 0.5 h OFF 70 C; 1000 h (0.25 % R + 0.05 ) 70 C; 8000 h (0.5 % R + 0.05 ) Endurance at upper category temperature 125 C; 1000 h (0.25 % R + 0.05 ) 155 C; 1000 h (0.5 % R + 0.05 ) Damp heat, steady state (40 2) C; 56 days; (93 3) % RH (0.5 % R + 0.05 ) Climatic sequence: 4.23 4.23.2 Endurance at 70 C: long term operation mode 1 %; 2 % At (20/LCT/20) C and (20/UCT/20) C 2 (Ba) Dry heat 155 C; 16 h 30 (Db) Damp heat, cyclic 55 C; 24 h; 90 % to 100 % RH; 1 cycle 4.23.4 1 (Aa) Cold - 55 C; 2 h 4.23.5 13 (M) Low air pressure 8.5 kPa; 2 h; 15 C to 35 C 4.23.6 30 (Db) Damp heat, cyclic 55 C; 5 days; 95 % to 100 % RH; 5 cycles (0.5 % R + 0.05 ) no visible damage 1 (Aa) Cold - 55 C; 2 h (0.1 % R + 0.01 ) - www.vishay.com 162 For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 28769 Revision: 16-Oct-09 MBA/SMA 0204 HF High Frequency Thin Film Leaded Resistors Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2-xx TEST METHOD TEST REQUIREMENTS PERMISSIBLE CHANGE (R max.) PROCEDURE Stability for product types: 1.5 to 470 MBA/SMA 0204 HF 4.13 - Short time overload Room temperature; U = 2.5 x P 70 x R or U = 2 x Umax.; 5 s (0.1 % R + 0.01 ) no visible damage 4.19 14 (Na) Rapid change of temperature 30 min at LCT and 30 min at UCT; 5 cycles (0.1 % R + 0.01 ) no visible damage 4.29 45 (XA) Component solvent resistance Isopropyl alcohol + 23 C; toothbrush method marking legible; no visible damage 4.18.2 20 (Tb) Resistance to soldering heat Unmounted components; (260 3) C; (10 1) s (0.1 % R + 0.01 ) no visible damage + 235 C; 2 s solder bath method; SnPb40 Good tinning ( 95 % R covered); no visible damage 4.17 20 (Ta) Solderability 4.22 6 (B4) Vibration 6 h; 10 Hz to 2000 Hz 1.5 mm or 196 m/s2 (0.1 % R + 0.01 ) 4.16 21 (Ua1) 21 (Ub) 21 (Uc) Robustness of terminations Tensile, bending and torsion (0.1 % R + 0.01 ); no visible damage 4.7 - Voltage proof URMS = Uins; 60 s No flashover or breakdown + 245 C; 3 s solder bath method; SnAg3Cu0.5 12NC INFORMATION FOR HISTORICAL CODING REFERENCE Ordering Example (For historical coding reference of MBA 0204 HF) Last Digit of 12NC Indicating Resistance Decade RESISTANCE DECADE LAST DIGIT 1 to 9.99 8 10 to 99.9 9 100 to 999 1 The ordering code of a MBA 0204 HF resistor, value 51 and TCR 50 with 2 % tolerance, supplied on bandolier ammopack, in a box units is: 2312 908 05109. 12NC CODE FOR HISTORICAL CODING REFERENCE OF MBA 0204 HF 2312 ... ..... DESCRIPTION BANDOLIER IN BOX AMMOPACK TYPE TCR TOL. C1 1000 units CT 5000 units MBA 0204 HF 50 ppm/K 2% 903 0.... 908 0.... Document Number: 28769 Revision: 16-Oct-09 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com 163 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1