Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-121 10250T Series Product Description Contents Description Page Product Description . . . . . . . . 2-121 Features . . . . . . . . . . . . . . . . . . 2-122 Benefits . . . . . . . . . . . . . . . . . . 2-122 Contact Operation . . . . . . . . . 2-122 Standards and Certifications. . . . . . . . . . . . . 2-122 Technical Data . . . . . . . . . . . . . 2-122 Product Selection -- Assembled Stations . . . . . . . 2-123 Point-of-Purchase Packaging . . . . . . . . . . . . . 2-127 Product Selection -- Assembled Devices Non-illuminated Momentary Pushbutton Units . . . . . . . . . . . . . . . . . 2-128 Illuminated Momentary Pushbutton Units. . . . . . . 2-129 Indicating Light Units . . . . 2-130 Push-Pull Units . . . . . . . . . . 2-131 Illuminated Push-Pull Units . . . . . . . . . . . . . . . . . 2-132 Potentiometers . . . . . . . . . . 2-134 Selector Switch Units . . . . 2-135 Joystick Units . . . . . . . . . . . 2-136 Roto-Push(R) Units. . . . . . . . 2-136 Product Selection -- Components Pushbuttons . . . . . . . . . . . . 2-137 Illuminated Pushbuttons and Indicating Lights. . . . 2-140 Push-Pulls . . . . . . . . . . . . . . 2-141 Selector Switch Selection . . . . . . . . . . . . . 2-143 Selector Switch Operators . . . . . . . . . . . . . 2-145 Illuminated Selector Switch Operators. . . . . . . 2-148 Joysticks . . . . . . . . . . . . . . . 2-149 Roto-Push Operators . . . . . 2-152 Contact Blocks . . . . . . . . . . 2-157 Options Legend Plates . . . . . . . . . . . 2-158 Plaques indicatrices en francais. . . . . . . . Appendix A Enclosures . . . . . . . . . . . . . 2-160 Accessories . . . . . . . . . . . . . 2-162 Mounting . . . . . . . . . . . . . . 2-164 Dimensions . . . . . . . . . . . . . 2-165 Ordering Complete Devices . . . . . . . . . . . . . . . 2-168 Catalogue Number Structure . . . . . . . . . . . . . 2-169 Renewal Parts . . . . . . . . . . 2-171 CAT.201.01.T.K Diaphragm Seal with Drainage Holes The 30.5 mm pushbutton line features a zinc die cast construction with chrome-plated housing and mounting nut. The same durable construction is also available with the corrosive resistant E34 line of pushbuttons. See E34 section on Pages 2-175 - 2-202. Reliability Nibs Cutler-Hammer contact blocks feature enclosed silver contacts with pointed "reliability nibs" for reliable performance from logic level up to 600V. To ensure reliable switching, nibs bite through oxide which can form on silver contacts, eliminating the need for expensive logic level blocks for most applications. Liquid Drainage Cutler-Hammer pushbutton operators offer front of panel drainage via holes in the operator bushing. Hidden from view by the mounting nut, these holes prevent buildup of liquid inside the operator, which can prevent operation in freezing environments. The holes also provide a route for escaping liquid in high pressure washdowns, effectively relieving pressure from the internal diaphragm seal, ensuring reliable sealing in applications even beyond NEMA 4. Foam Neoprene Panel Sealing Gasket Drainage Hole Flexible Diaphragm Stainless Steel Operating Spring Colorfast Molded Button Dry Circuit Drainage Hole Mounting Nut Medium Duty Figure 2-46. Diaphragm Seal Grounding of 10250T Operators Heavy-Duty Figure 2-45. Reliability Nibs Reliability nibs improve performance in dry circuit, corrosive, fine dust and other contaminated atmospheres. Under normal environmental conditions, the minimum operational voltage is 5V and the minimum operational current is 1 mA, AC/DC. For operation under a wider range of environmental conditions, logic level contact blocks with inert palladium tipped contacts are recommended. 10250T line operators have "grounding nibs" -- four metal points on the operator casting designed to bite through most paints and other coatings on metal panels to enhance the ground connection when the operator is securely tightened. Grounding Nibs Grounding Nibs 10250T Series For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-122 July 2001 10250T Series, Technical Data Features Technical Data Heavy-duty zinc die cast construction Enclosed silver contacts with reliability nibs Diaphragm seals with drainage holes Grounding nibs on the operator casing Mechanical Ratings Transformers: will withstand short circuit for 1 hour per IEC 60997-5-1 Bulbs -- average life Transformer type: 20,000 hrs. Resistor/direct voltage type: 2500 hrs. minimum @ rated V LED: 60,000 to 100,000 hrs. Life Pushbuttons: 10 x 10 6 operations Contact blocks: 10 x 10 6 operations PresTest units: 10 x 10 6 operations Lever and key selector switches: 0.25 x 10 6 operations Twist to release pushbuttons: 0.3 x 10 6 operations Shock resistance Duration: 20 mS 5g Note: For additional technical information, see Pub. TD.7.4.T.E.04. Benefits Reliability nibs improve contact reliability even under dry circuit and fine dust conditions Drainage holes prevent buildup of liquid inside the operator which can prevent operation in freezing environments Grounding nibs bit through paint and other coatings to provide secure ground 2 Contact Operation Climate Conditions Slow make and break. All normally closed contacts have positive opening operation, i.e., normally closed contacts are forced open in the event of contact weld or spring breakage. Operating Maximum 140F (60C) at 95% RH, Temperature 1 to 150F (-17 to 66C) altitude 6562 feet (2000m) Storage Maximum 140F (60C) at 95% RH, Temperature -40 to 176F (-40 to 80C) Standards and Certifications CE EN60947-5-1 UL 508 -- File No. 131568 CSA C22.2 No. 14 -- File No. LR68551 Ingress Protection Standard Indicating Lights NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13 IEC IP65 All Other Operators NEMA 1, 2, 3, 3R, 4, 4X, 12, 13 IEC IP65 Light Units Frequency of operation All pushbuttons: 6000 operations/hr. Key and lever selector switches: 3000 operations/hr. Auto-latch devices: 1200 operations/hr. Electrical Ratings Insulation: Ui = 660V AC or DC Thermal: lth = 10A Short circuit (IEC 60947-5-1): 1000A with a 6A (NIT) fuse (to BS88) NEMA, UL rating: A600, P600 AC load life duty cycle 1200 operations/hour - 10A: 110V pf 0.4 - 1 x 10 6 operations - 5A: 250V pf 0.4 - 1 x 10 6 operations - 2A: 660V pf 0.4 - 1 x 10 6 operations Terminals Marking NC-NO on the contact block to meet the NEMA requirements. Dual marking system 1 - 2 for normally closed, 3 - 4 for normally open to meet BS5472 (Cenelec EN50 005) Clamps Terminals are saddle clamp type for 1 x 22 AWG (0.34 mm2) to 2 x 14 AWG (4.0 mm2) conductors Torque = 7 lb-in (0.8 Nm) Switching capacity AC15 rated make/break (11 x le at 1.1 x Ue) - 6A: 120V pf 0.3 - 4A: 240V pf 0.3 - 2A: 660V pf 0.3 Degree of protection against direct electrical contact: IP2X with fingerproof shroud DC13 rated make/break (1.1 x le at 1.1 x Ue) - 1.0A: 125V L/R 0.95 at 300 mS - .55A: 250V L/R 0.95 at 300 mS - .1A: 660V L/R 0.95 at 300 mS - 10A: 110V pure resistive Maximum ratings for logic level and hostile atmosphere application Maximum amperes: 0.5A Maximum volts: 120V AC/DC Table 2-204. Contact Block Meet or Exceed NEMA Rating Designations A600, A300 and B300 for AC and P600 for DC Description Volts AC 50 or 60 Hz 120 Make and Emerg. Interrupting Capacity (Amp) Normal Load Break (Amp) Thermal Current (Amp) Voltamperes: Make and Emerg. Interrupting Capacity Normal Load Break 60 6 10 240 30 3 10 480 15 1.5 10 7200 7200 7200 720 720 720 For more information contact Cutler-Hammer at: www.cutler-hammer.ca Volts DC 600 12 1.2 10 7200 720 24/28 125 5.7 5.7 5.0 138 138 1.1 1.1 5.0 138 138 250 0.55 0.55 5.0 138 138 CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-123 10250H Series, Assembled Stations Product Selection -- Assembled Stations General Purpose Type N Control Stations Table 2-205. Product Selection -- Type N Assembled Control Stations -- NEMA and Open Type Enclosure Type Contact Symbol Button Type/Colour Button Engraving (See for other legends) Surface Mounting NEMA 1 Rectangle Button Catalogue Number Open Type Construction (No Cover) Round Button Price Catalogue Number Price One Element Single Button with Padlock Attachment Accessory Indicating Light Selector Switch Flush/Green Flush/Black START None 10250H5100 -- -- 10250H2536 -- -- Flush/Red Flush/Black STOP None 10250H5101 -- -- 10250H2535 -- -- Extended/Red STOP 10250H5104 -- -- Palm Operated/Black None 10250H89 -- -- None 10250H5120 10250ED853-3 10250ED853-4 -- -- -- -- -- -- 3-Position Selector Switch/Black Knob RUN/OFF/AUTO 10250H289 10250H2538 Flush/Green Flush/Red START/STOP -- 10250H5200 110/220V Neon Indicating Light Clear Red Amber Two Element Two Button Station Flush/Green Extended/Red -- 10250H2747 -- -- 10250H5207 -- -- -- -- -- -- -- -- -- -- -- -- -- -- Flush/Black (All) RAISE/LOWER FOR/REV OPEN/CLOSE UP/DOWN HIGH/LOW FAST/SLOW 10250H5201 10250H5202 10250H5203 10250H5204 10250H5205 10250H5208 Flush/Black (All) Mech. Interlocked None -- Three Button Stations Flush/Black (All) FAST/SLOW/STOP FOR/REV/STOP UP/DOWN/STOP OPEN/CLOSE/STOP RAISE/LOWER/STOP 10250H5304 10250H5300 10250H5301 10250H5303 10250H5302 -- -- -- -- -- -- -- -- -- -- Three Button with Indicating Light 110/220V Neon Indicating Light START/STOP Clear -- Flush/Green; Flush/Red Red -- Flush/Green; Flush/Red Amber -- Flush/Green; Flush/Red 10250H5310 10250ED853 10250ED853-2 -- -- -- -- -- -- Potentiometer and START/STOP 5K Ohm Potentiometer Flush/Green; Flush/Red 10250H5350 -- -- 10250H5351 -- -- Mechanically Interlocked Pushbuttons -- 10250H2544 Three Element 10K Ohm Potentiometer Flush/Green; Flush/Red Other legends including horizontal mounting or blank are available on all stations. For other legends, specify marking (limited to one line with a maximum of 5 characters). CAT.201.01.T.K START/STOP No legend on button. Specify any standard legend, no change in price. Round button. For pricing information, refer to the CutlerHammer Control & Automation Products Price & Availability Digest. Accessories . . . . . . . . . . . . . . . . . . . . . . Page 2-124 Dimensions. . . . . . . . . . . . . . . . . . . . . . . Page 2-124 For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-124 July 2001 10250H Series, Special Purpose Assembled Stations General Purpose Type N Control Stations (Continued) Special Purpose Control Stations Table 2-206. Accessories Description Catalogue Number Padlock Attachment -- For field assembly on square button type (except extended button types) 10250H5110 Price Two Element Pushbutton Station Cat. No. 10250H364 For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-207. Maximum Ampere Ratings Voltage 2 AC Make and Emergency Interrupt Capacity Normal Load Break Continuous Current DC 110V 220V 30 15 3 1.5 10 10 440V 550V 7.5 120V 240V 600V 1.0 0.5 0.1 6 0.75 0.6 10 1.0 10 10 0.5 10 0.1 10 Table 2-208. Approximate Dimensions in Inches (mm) Type Wide A High B Deep C Mounting D E Ship. Wt. Lbs. (kg) Table 2-209. Product Selection -- Special Purpose Control Stations -- NEMA 3, 3R, 4, 4X, 13 Type Feature One Element Pushbutton Flush Two Element Pushbutton 1 or 2 Elements Square Button 2.25 (57.2) 4.00 (101.6) 2.25 (57.2) 1.50 (38.1) 3.25 (82.6) 1.0 (0.5) Round Button 2.63 (66.8) 4.25 (108.0) 2.25 (57.2) 1.50 (38.1) 3.25 (82.6) 1.0 (0.5) 2.25 (57.2) 6.00 (152.4) 2.25 (57.2) 1.50 (38.1) 5.00 (127.0) 2.0 (0.9) 3 Elements Square Button 2.38 (60.5) for neon indicating light, 2.56 (65.0) for potentiometer. Symbol Standard Legend Catalogue Number Price START 10250H2738 STOP 10250H658 With Lock Hasp STOP 10250H665 Flush START/STOP 10250H364 With Lock Hasp START/STOP 10250H671 Buttons Interlocked FAST/SLOW FOR/REV UP/DOWN OPN/CLOSE 10250ED664 10250H2740 10250H2741 10250H2742 For other legends specify marking (limited to one line with a maximum of 5 characters). Table 2-210. Approximate Dimensions in Inches (mm) Wide A High B Deep C 3.13 (79.5) 6.25 (158.8) Mounting D Ship. Wt. Lbs. (kg) E 3.38 (85.9) 2.25 (57.2) 5.50 (139.7) 2.5 (1.1) E B E D B C A Figure 2-47. Approximate Dimensions in Inches (mm) D A C 0.75 (19.1) Pipe Tap Figure 2-48. Approximate Dimensions in Inches (mm) Renewal Parts . . . . . . . . . . . . . . . . . . . . Page 2-173 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-125 10250H Series, Heavy-Duty Assembled Stations Heavy-Duty Type H Control Stations 10250T Series operators Dark brown polyester enclosure Protective rubber gaskets provide NEMA 3S rating on pushbuttons Top and bottom 3/4-inch NPT conduit entrances Includes alternate legend plates and spare mounting screws Table 2-211. Product Selection -- Type H Control Stations -- UL (NEMA) 3, 3S, 4, 4X, 12, 13 Type of Element Feature Circuit Without Padlock Hasp Assembled Legend Plate Unassembled Alternate Legend Plates Catalogue Number 1NO-1NC JOG START STOP RUN 10250H1881 With Padlock Hasp 1NC -- 10250H4239 2-Position 3-Position 1NO-1NC OFF/ON 1NO-1NC MAN/OFF/ AUTO -- -- 10250H4526 10250H4527 Price One Element Pushbuttons Knob Selector Switch STOP Two Element Pushbuttons Standard Standard and Standard w/ Padlock Hasp 1NO-2NC START/STOP -- 10250H1884 2NO-2NC RAISE/LOWER FORWARD REVERSE OPEN CLOSE 10250H1885 1NO-2NC START/STOP -- 10250H4240 2 Three Element Pushbuttons Heavy-Duty Control Station -- Cat. No. 10250H1913 Replacement Black Gasket Cat. No. 32-253-2 Indicating Light and Pushbuttons Standard 2NO-3NC FOR/REV/STOP START JOG 2 Standard and 2NO-3NC FOR/REV/STOP RAISE Standard w/ LOWER Padlock Hasp 120V Light-Red Lens 1NO-2NC MOTOR 240V and 2 Plain RUNNING 480V START/STOP 600V OPEN 10250H1890 CLOSE FAST 10250H4241 SLOW -- 10250H1913 10250H1914 10250H1915 10250H1916 Table 2-212. Approximate Dimensions in Inches (mm) NEMA Type No. of Elements Dimensions Wide High Deep 3, 3R, 3S, 4, 4X, 13 1 and 2 3 4.50 (114.3) 4.50 (114.3) 8.25 (209.6) 10.75 (273.1) 4.50 (114.3) 4.25 (108.0) Table 2-213. Maximum Ampere Ratings Description Make and Emerg. Inter. Capacity Normal Load Break Continuous Amperes Voltamperes -- Make and Emerg. Inter. Cap. Normal Load Break Volts AC 50/60 Hz Volts DC 120 240 480 600 125 250 60 6 10 30 3 10 15 1.5 10 12 1.2 10 1.1 1.1 10 0.55 0.55 10 7200 720 7200 720 7200 720 7200 720 138 138 138 138 For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Renewal Parts . . . . . . . . . . . . . Page 2-174 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-126 July 2001 10250T Series, Assembled Stations 10250T Heavy-Duty 30.5 mm Control Stations 10250T Series operators ASA 61 Grey die-cast zinc enclosures Surface or flush mounting Single 3/4-inch NPT conduit entrance on one and two element stations Single 1-inch NPT conduit entrance on three element stations Table 2-214. Product Selection -- Complete Assembled Stations -- UL (NEMA) 4, 4X, 12, 13 Number of Elements Type of Elements Feature One Element Pushbutton 2 Selector Switch 10250T3573 10250T3575 10250T3597 10250T4310 10250T4311 10250T4342 Mushroom Head NO-NC NC START STOP 10250T3517 10250T3519 10250T3574 10250T3576 -- -- With Lock Hasp NC STOP 10250T3520 10250T3577 10250T4314 2-Position Black Knob NO-NC OFF/ON 10250T3523 10250T3580 3-Position Black Knob 2NO MAN/OFF/AUTO 10250T3524 10250T3581 START/STOP 10250T3545 10250T3602 Two Element Pushbuttons Standard NC (Logic EMERGENCY OFF 10250TGS Level) EMERGENCY OFF 10250TGR Price -- -- Price Price -- -- 10250T4315 10250T4316 -- -- -- -- -- -- -- -- 1NO-2NC START/STOP 2NO-2NC RAISE/LOWER 2NO-2NC None 10250T3525 10250T3672 10250T3541 10250T3582 10250T3673 10250T3598 10250T4320 10250T4322 10250T4343 With Lock Hasp 1NO-2NC START/STOP 10250T3542 10250T3599 -- -- Standard and Mushroom Head 1NO-2NC START/STOP 10250T3526 10250T3583 -- -- Standard with Maintained Contact NO-NC Plus NC 10250T3528 10250T3585 -- -- 2NO-3NC FOR, REV, STOP 2NO-3NC UP, DOWN, STOP 2NO-3NC OPEN, CLOSE, STOP 2NO-3NC None, None, STOP 10250T3532 10250T3615 10250T3589 -- -- 10250T4331 10250T4332 10250T3614 -- -- 10250T4333 10250T3543 10250T3600 10250T4344 2NO-3NC None, None, STOP 10250T3544 10250T3601 -- 10250T3536 10250T3537 10250T3538 10250T3539 10250T3593 10250T3594 10250T3595 10250T3596 10250T4337 10250T4338 10250T4339 10250T4340 Pushbuttons Standard 2 Standard and with Lock Hasp Catalogue Number 10250T3516 10250T3518 10250T3540 Break Glass Station Catalogue Number START STOP None Grey Enclosure Red Enclosure Catalogue Number NO-NC NC NO-NC Break Glass Station Surface Mounting Standard Momentary Red Button Indicating Light (Transformer Type) and Pushbuttons Flush Mounting Legend Push-Pull 3-Position Three Element Surface Mounting Contact Block(s) START/STOP Red Lens -- 110V 1NO-2NC MOTOR RUN, Red Lens -- 220V START/STOP Red Lens -- 440V Red Lens -- 550V Breaking glass closes contact. Stop buttons are red -- all others are black. Uses deep cover instead of shallow cover. Switch component is 10250TA67. Uses NEMA 4X black lever. NEMA 4 - 13, if properly mounted on a flat surface. Consist of front plate, legend, operator and contact blocks. Lock is 10250TA2. Enclosure has corrosion resistant coating. For pricing information, refer to the CutlerHammer Control & Automation Products Price & Availability Digest. -- Table 2-215. Break Glass Kit Break Glass Operator Shown Assembled to Contact Block (Contact Block Supplied Separately) Description Catalogue Number Operator with Hammer and 5 Glass Discs Glass Discs Only (5) 10250TBG Price 10250TGL Dimensions . . . . . . . . . . . . . . Pages 2-165 - 2-167 Renewal Parts . . . . . . . . . . . Pages 2-171 - 2-172 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-127 10250T Series, Assembled Stations Point-of-Purchase Packaging Point-of-Purchase Packaging Features Most popular assembled 10250T devices See-through clam shell packaging Attractive colourful graphic insert Competitive replacement part numbers Multi-purpose packs include alternate legend plates and different coloured lenses where applicable 2 Table 2-216. Assembled 10250T Devices Point-of-Purchase Packaging Product Description Catalogue Number Black Flush Pushbutton 1NO-1NC contact block. Also includes two square engraved legend plates: START and JOG. 10250T30B-POP Red Extended Pushbutton 1NO-1NC contact block. Also includes one square engraved legend plate: STOP. 10250T31R-POP Red Mushroom Pushbutton 1NO-1NC contact block. Also includes two square engraved legend plates: EMERG. STOP and STOP. 10250T32R-POP Red Jumbo Mushroom Pushbutton Engraved EMERG. STOP with 1NO-1NC contact block. 10250T33-POP Black Knob Two-Position Selector Switch 1NO-1NC contact block. Also includes three square engraved legend plates: OFF/ON, HAND/AUTO and RUN/JOG. 10250T20KB-POP Black Knob ThreePosition Selector Switch 1NO-1NC contact block. Also includes 1 square engraved legend plate: HAND/OFF/AUTO. 10250T22KB-POP 1NO-1NC contact block. Also includes two square engraved legend plates: EMERG. STOP and STOP. 10250T5B62-1-POP Red Indicating LIght Full voltage 24V AC/DC with two extra lenses -- Green and Amber. Also includes two square engraved legend plates: RUN and JOG. 10250T206NC1N-POP Red Indicating Light Resistor 120V AC/DC with two extra lenses: Green and Amber. Also includes one square engraved legend plate: RUN and JOG. 10250T34R-POP Red Illuminating Pushbutton Full voltage 24V AC/DC with 1NO-1NC contact block and two extra lenses: Green and Amber. Also includes one square engraved legend plate: POWER ON. 10250T476C21-1-POP Red Illuminating Pushbutton Resistor 120V AC/DC with 1NO-1NC contact block and two extra lenses: Green and Amber. Also includes one square engraved legend plate: POWER ON. 10250T411C21-1POP Pushbuttons Selector Switches Push-Pulls Red Non-illuminated Push-Pull Indicating Lights Illuminated Pushbuttons For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Minimum order quantity of two. CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Price Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-128 July 2001 10250T Series, Assembled Devices -- Momentary Pushbutton Units Product Selection -- Assembled Devices Non-illuminated Momentary Pushbutton Units Flush, Extended, Mushroom Head or Jumbo Mushroom Head Operators Flush Button -- Black Catalogue Number 10250T30B 2 Extended Button -- Red Catalogue Number 10250T31R Jumbo Mushroom -- Red Catalogue Number 10250T33R Mushroom Button -- Red Catalogue Number 10250T32R Table 2-217. Pushbutton Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Contact Type Button Colour Flush Button Extended Button Catalogue Number Catalogue Number Price Mushroom Button Jumbo Mushroom Catalogue Number Price Catalogue Number 1NO Black Red Green Yellow Red -- Engraved EMERG. STOP 10250T23B 10250T23R 10250T23G 10250T23Y -- 10250T25B 10250T112-53 10250T25G 10250T25Y -- 10250T26B 10250T122-53 10250T26G 10250T26Y -- -- 10250T27B 10250T172-53 10250T27G 10250T27Y -- 10250T17213-53 1NC Black Red Green Yellow Red -- Engraved EMERG. STOP 10250T101-51 10250T102-52 10250T103-51 10250T104-51 -- 10250T111-51 10250T25R 10250T113-51 10250T120-51 -- 10250T121-51 10250T26R 10250T123-51 10250T124-51 -- -- 10250T171-51 10250T27R 10250T173-51 10250T174-51 -- 10250T29 1NO-1NC Black Red Green Yellow Red -- Engraved EMERG. STOP 10250T30B 10250T30R 10250T30G 10250T30Y -- 10250T31B 10250T31R 10250T31G 10250T31Y -- 10250T32B 10250T32R 10250T32G 10250T32Y -- -- 10250T33B 10250T33R 10250T33G 10250T33Y -- 10250T33 2NO Black Red Green Yellow Red -- Engraved EMERG. STOP 10250T101-2 10250T102-2 10250T103-2 10250T104-2 -- 10250T111-2 10250T112-2 10250T113-2 10250T120-2 -- 10250T121-2 10250T122-2 10250T123-2 10250T124-2 -- -- 10250T171-2 10250T172-2 10250T173-2 10250T174-2 -- 10250T17213-2 2NC Black Red Green Yellow Red -- Engraved EMERG. STOP 10250T101-3 10250T102-3 10250T103-3 10250T104-3 -- 10250T111-3 10250T112-3 10250T113-3 10250T120-3 -- 10250T121-3 10250T122-3 10250T123-3 10250T124-3 -- -- 10250T171-3 10250T172-3 10250T173-3 10250T174-3 -- 10250T17213-3 Price Anodized aluminum head is not suitable for use in ultraviolet light applications. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Accessories . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . Legend Plates. . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158- 2-159 CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-129 10250T Series, Assembled Devices -- Illuminated Pushbutton Units Illuminated Momentary Pushbutton Units LED or Incandescent Full Voltage, Resistor or Transformer Type Plastic Lenses 24V Full Voltage Illuminated Pushbutton -- Red Catalogue Number 10250T476C21-53 Table 2-218. Illuminated Pushbutton Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Lamp Type Voltage Colour Illuminated Pushbutton 1NO Catalogue Number LED Full Voltage 24V AC/DC Catalogue Number Price Catalogue Number Price 10250T397LRD24-53 10250T397LGD24-53 10250T397LAD24-53 10250T397LYD24-53 10250T397LLD24-53 10250T397LWD24-53 10250T397LRD24-1 10250T397LGD24-1 10250T397LAD24-1 10250T397LYD24-1 10250T397LLD24-1 10250T397LWD24-1 10250T397LRD24-51 10250T397LGD24-51 10250T397LAD24-51 10250T397LYD24-51 10250T397LLD24-51 10250T397LWD24-51 120V AC Red Green Amber Yellow Blue White 10250T397LRD2A-53 10250T397LGD2A-53 10250T397LAD2A-53 10250T397LYD2A-53 10250T397LLD2A-53 10250T397LWD2A-53 10250T397LRD2A-1 10250T397LGD2A-1 10250T397LAD2A-1 10250T397LYD2A-2 10250T397LLD2A-1 10250T397LWD2A-1 10250T397LRD2A-51 10250T397LGD2A-51 10250T397LAD2A-51 10250T397LYD2A-51 10250T397LLD2A-51 10250T397LWD2A-51 120V AC Red Green Amber Yellow Blue White 10250T411LRD06-53 10250T411LGD06-53 10250T411LAD06-53 10250T411LYD06-53 10250T411LLD06-53 10250T411LWD06-53 10250T411LRD06-1 10250T411LGD06-1 10250T411LAD06-1 10250T411LYD06-1 10250T411LLD06-1 10250T411LWD06-1 10250T411LRD06-51 10250T411LGD06-51 10250T411LAD06-51 10250T411LYD06-51 10250T411LLD06-51 10250T411LWD06-51 Red Green Amber Yellow Blue Clear White 10250T476C21-53 10250T476C22-53 10250T476C43-53 10250T476C23-53 10250T476C24-53 10250T476C25-53 10250T476C26-53 10250T476C21-1 10250T476C22-1 10250T476C43-1 10250T476C23-1 10250T476C24-1 10250T476C25-1 10250T476C26-1 10250T476C21-51 10250T476C22-51 10250T476C43-51 10250T476C23-51 10250T476C24-51 10250T476C25-51 10250T476C26-51 #757 or 28-5185 Resistor 120V AC/DC Red Green Amber Yellow Blue Clear White 10250T471C21-53 10250T471C22-53 10250T471C43-53 10250T471C23-53 10250T471C24-53 10250T471C25-53 10250T471C26-53 10250T471C21-1 10250T471C22-1 10250T471C43-1 10250T471C23-1 10250T471C24-1 10250T471C25-1 10250T471C26-1 10250T471C21-51 10250T471C22-51 10250T471C43-51 10250T471C23-51 10250T471C24-51 10250T471C25-51 10250T471C26-51 120MB or 28-3044 Transformer 120V AC 10250T75R 10250T75G 10250T75A 10250T75Y 10250T75B 10250T75C 10250T75W 10250T76R 10250T76G 10250T76A 10250T76Y 10250T76B 10250T76C 10250T76W 10250T77R 10250T77G 10250T77A 10250T77Y 10250T77B 10250T77C 10250T77W #755 or 28-2202 Incandescent Full Voltage 24V AC/DC Price LED/Lamp Number 1NC Red Green Amber Yellow Blue White Transformer 1NO-1NC Red Green Amber Yellow Blue Clear White Bayonet Base See page 2-171 for list of LED bulbs For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. For flashing module Catalogue Number 10250TFL1, add Suffix Code FM to listed Catalogue Number. Example: 10250T75RFM. Accessories . . . . . . . . . . . . . Pages 2-162 - 2-163 Dimensions. . . . . . . . . . . . . . Pages 2-165 - 2-167 Enclosures . . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates . . . . . . . . . . . Pages 2-158 - 2-159 Replacement Lamps/LEDs . . . . . . . . . . . Page 2-171 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-130 July 2001 10250T Series, Assembled Devices -- Indicating Light Units Indicating Light Units LED or Incandescent Full Voltage, Resistor or Transformer Type Standard and PresTest Types Plastic Lenses PresTest -- This device incorporates a press-to-test feature whereby depressing the lens disconnects the light from the source being monitored and connects the lamp to a continuously energized circuit for immediate detection of faulty lamps. 2 24V Full Voltage Indicating Light -- Red Catalogue Number 10250T206NC1N 120V AC Transformer PresTest -- Green Catalogue Number 10250T74NG Table 2-219. Indicating Light Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Lamp Type Voltage Colour Indicating Light Catalogue Number LED Incandescent Full Voltage 24V AC/DC PresTest Price Catalogue Number Price LED/Lamp Number Red Green Amber Yellow Blue White 10250T197LRP24 10250T197LGP24 10250T197LAP24 10250T197LYP24 10250T197LLP24 10250T197LWP24 10250T297LRP24 10250T297LGP24 10250T297LAP24 10250T297LYP24 10250T297LLP24 10250T297LWP24 120V AC Red Green Amber Yellow Blue White 10250T197LRP2A 10250T197LGP2A 10250T197LAP2A 10250T197LYP2A 10250T197LLP2A 10250T197LWP2A 10250T297LRP2A 10250T297LGP2A 10250T297LAP2A 10250T297LYP2A 10250T297LLP2A 10250T297LWP2A Transformer 120V AC Red Green Amber Yellow Blue White 10250T181LRP06 10250T181LGP06 10250T181LAP06 10250T181LYP06 10250T181LLP06 10250T181LWP06 10250T221LRP06 10250T221LGP06 10250T221LAP06 10250T221LYP06 10250T221LLP06 10250T221LWP06 Full Voltage 24V AC/DC Red Green Amber Yellow Blue Clear White 10250T206NC1N 10250T206NC2N 10250T206NC19N 10250T206NC3N 10250T206NC4N 10250T206NC5N 10250T206NC6N 10250T235NC21 10250T235NC22 10250T235NC43 10250T235NC23 10250T235NC24 10250T235NC25 10250T235NC26 #757 or 28-5185 Resistor 120V AC/DC Red Green Amber Yellow Blue Clear White 10250T201NC1N 10250T201NC2N 10250T201NC19N 10250T201NC3N 10250T201NC4N 10250T201NC5N 10250T201NC6N 10250T231NC21 10250T231NC22 10250T231NC43 10250T231NC23 10250T231NC24 10250T231NC25 10250T231NC26 120MB or 28-3044 Transformer 120V AC Red Green Amber Yellow Blue Clear White 10250T34R 10250T34G 10250T34A 10250T34Y 10250T34B 10250T34C 10250T34W 10250T74NR 10250T74NG 10250T74NA 10250T74NY 10250T74NB 10250T74NC 10250T74NW #755 or 28-2202 Bayonet Base See page 2-171 for list of LED bulbs Standard indicating lights are rated UL (NEMA) 3S as well. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. For flashing lamp add letter F to listed Catalogue Number. Example: 10250T34RF. Accessories . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . Legend Plates. . . . . . . . . . . Replacement Lamps/LEDs . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 Page 2-171 CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-131 10250T Series, Assembled Devices -- Push-Pull Units Push-Pull Units Two- and Three-Position Non-illuminated Table 2-220. 2-Position Push-Pull Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position Pull Button Type/Colour Push Push-Pull Catalogue Number Price Contact Type Mounting Location A B 2-Position Maintained Push, Maintained Pull O X X O 40 mm/Red 10250T5B62-1X 40 mm Engraved EMERG. STOP/Red 10250T5B63-1X 1NO 1NC 65 mm Alum. Engraved 10250T5J63-1X EMERG. STOP/Red 2-Position Push-Pull Cat. No. 10250T5B62 2 65 mm Alum. Engraved 10250ED1080-2 EMERG. STOP/Red O X Special Security Jumbo Mushroom Head Push-Pull Operator Cat. No. 10250ED1080 X O 1NO 1NC Table 2-221. 3-Position Pull-Pull Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position Pull Button Type/Colour Intermediate Push Push-Pull Catalogue Number Price Contact Type Mounting Location A B 3-Position Maintained Push, Momentary Pull 40 mm/ Black X X O X O O 10250T9B60-3X 40 mm/Red 10250T9B62-3X 40 mm Engraved EMERG. STOP/Red 10250T9B63-3X 1NC 1NC 3-Position Momentary Push, Momentary Pull X X O X O O 40 mm/Black 10250T4B60-3X 40 mm/Red 10250T4B62-3X O X O O X O 40 mm/Black 10250T10B60-1X 40 mm/Red 10250T10B62-1X 1NC 1NC 1NO 1NC X = closed circuit, O = open circuit. To order different type or colour buttons, substitute the underlined characters with appropriate Suffix Code from the table below. Example: 10250T5B64-1X. Table 2-222. Button and Colour Selection Table Standard -- 40 mm Colour Catalogue Number Suffix Price Code Red Red (EMERG. STOP) Green Black Blue 10250TB62 10250TB63 10250TB61 10250TB60 10250TB64 B62 B63 B61 B60 B64 Jumbo Mushroom Head (Anodized) Aluminum -- 65 mm Colour Catalogue Number Suffix Price Code Red Red (EMERG. STOP) Green Black Yellow 10250TJ62 10250TJ63 10250TJ61 10250TJ60 10250TJ64 J62 J63 J61 J60 J64 Anodized aluminum head is not suitable for use in ultraviolet light applications. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Accessories . . . . . . . . . . . . . Dimensions. . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . . Legend Plates . . . . . . . . . . . CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-132 July 2001 10250T Series, Assembled Devices -- Illuminated Push-Pull Units Illuminated Push-Pull Units LED or Incandescent Full Voltage, Resistor or Transformer Type Two-Position Maintained 2-Position Push-Pull Operator with Red Button (Standard) and Full Voltage Light Unit Table 2-223. 2-Position Illuminated Maintained Push, Maintained Pull -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position Maintained -- Pull Lamp Type Voltage Maintained -- Push Red Standard Push-Pull Catalogue Number Price Contact Mounting Location LED/Lamp Type Number A B 2 LED O X Full Voltage Transformer 24V AC Incandescent Full Voltage O X 24V AC/DC Resistor X O 1NO 1NC 10250T589LRD06-1X 120V AC 10250T563LRD06-1X 24V AC/DC 10250T579C47-1X Transformer 24V AC Bayonet Base #757 120V AC/DC 10250T580C47-1X 120V AC 10250T597LRD24-1X 120V AC/DC 10250T597LRD2A-1X X O 1NO 1NC 10250T589C47-1X 120MB #755 10250T563C47-1X X = closed circuit, O = open circuit. To order different type or colour lens, substitute the underlined characters with appropriate Suffix Code from table below. Example: 10250T579C63-1X. For LEDs with different voltages see ordering example on Page 2-142. Table 2-224. Lens and Colour Selection Table Type Lens Colour Catalogue Number Incand. Suffix Code LED Suffix Code Standard - 40 mm Red Red (EMERGENCY STOP) Green Blue Amber White Clear 10250TC47 10250TC53 10250TC48 10250TC49 10250TC50 10250TC51 10250TC52 C47 C53 C48 C49 C50 C51 C52 RD ED GD LD AD WD CD Side-Lighted Aluminum - 40 mm Red Red (EMERGENCY STOP) Green Blue Amber Yellow White Clear 10250TC57 10250TC63 10250TC58 10250TC59 10250TC64 10250TC60 10250TC61 10250TC62 C57 C63 C58 C59 C64 C60 C61 C62 RS ES GS LS AS YS WS CS Aluminum Transparent Center - 40 mm Red Green Amber 10250TC65 10250TC66 10250TC67 C65 C66 C67 RH GH AH Clear anodized aluminum and coloured lens For pricing information, refer to the CutlerHammer Control & Automation Products Price & Availability Digest. Price Accessories . . . . . . . . . . . . Additional Light Units . . . . Dimensions . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . Legend Plates. . . . . . . . . . . Replacement Lamps/LEDs . . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Page 2-142 Pages 2-165 - 2-167 Pages 2-160- 2-161 Pages 2-158 - 2-159 Page 2-171 CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-133 10250T Series, Assembled Devices -- Illuminated Push-Pull Units Illuminated Push-Pull Units (Continued) LED or Incandescent Full Voltage, Resistor or Transformer Type Three-Position Momentary 3-Position Push-Pull Operator with Red Button (Standard) and Transformer Light Unit Table 2-225. 3-Position Illuminated Momentary Push, Momentary Pull -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position Momentary -- Pull Lamp Type Voltage Maintained -- Momentary -- Intermediate Push Catalogue Number LED Full Voltage O O X O Transformer Full Voltage 10250T1089LRD06-1X 120V AC 10250T1063LRD06-1X O X O O Transformer IncanFull descent Voltage 120V AC 10250T463LRD06-3X O O X O Transformer Full Voltage 10250T1089C47-1X 120V AC 10250T1063C47-1X O X O O Transformer 1NC 1NC 1NO 1NC 120V AC 10250T463C47-3X 120MB or 28-3044 #755 or 28-2202 #757 or 28-5189 10250T480C47-3X 10250T489C47-3X See page 2-171 #757 or 28-5185 24V AC/DC 10250T479C47-3X 24V AC See page 2-171 Bayonet Base 10250T1080C47-1X 24V AC Resistor 120V AC X X 1NO 1NC 24V AC/DC 10250T1079C47-1X Resistor 120V AC O X Bayonet Base 10250T497LRD2A-3X 10250T489LRD06-3X B LED/ Lamp Number 2 24V AC/DC 10250T497LRD24-3X 24V AC Mounting Location A Price 10250T1097LRD2A-1X 24V AC 120V AC X X Contact Type 24V AC/DC 10250T1097LRD24-1X 120V AC O X Red Standard Push-Pull 1NC 1NC 120MB or 28-3044 #755 or 28-2202 X = closed circuit, O = open circuit. To order different type or colourcolour lens, substitute the underlined characters with appropriate Suffix Code from table on the bottom of Page 2-132. Example: 10250T1079C53-1X. For LEDs with different voltages see ordering example on Page 2-142. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Accessories. . . . . . .. . . . . . . .Pages 2-162 - 2-163 Additional Light Units. . . . . . . . . . . . . . . . .Page 2-142 Dimensions. . . . . . . . . . . . . . . Pages 2-165 - 2-167 Enclosures. .. . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates. . . . . . . . . . . . . Pages 2-158 - 2-159 Replacement Lamps/LEDs. . . . . . . . . . . .Page 2-171. CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-134 July 2001 10250T Series, Assembled Devices -- Illuminated Push-Pull Units & Potentiometers Illuminated Push-Pull Units (Continued) LED or Incandescent Full Voltage, Resistor or Transformer Type Three-Position -- Maintained Push, Momentary Pull 3-Position Push-Pull Operator with Red Button (Standard) Table 2-226. 3-Position Illuminated Maintained Push, Momentary Pull -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position Lamp Type Voltage Momentary -- Maintained -- Maintained -- Pull Intermediate Push Red Standard Push-Pull Catalogue Number Price Contact Type Mounting Location LED/ Lamp B Number A 2 LED X X O X O O Full Voltage Transformer IncanFull descent Voltage X X O X O O 24V AC/DC 10250T997LRD24-3X 120V AC 10250T997LRD2A-3X 24V AC 10250T989LRD06-3X 120V AC 10250T963LRD06-3X Bayonet Base 1NC 1NC 24V AC/DC 10250T979C47-3X Resistor 120V AC 10250T980C47-3X Transformer 24V AC 10250T989C47-3X 120V AC 10250T963C47-3X #757 1NC 1NC 120MB #755 X = closed circuit, O = open circuit. To order different type or colour lens, substitute the underlined characters with appropriate Suffix Code from table on the bottom of Page 2-132. Example: 10250T979C53-3X. For LEDs with different voltages see ordering example on Page 2-142. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Potentiometers Table 2-227. Potentiometer with Knob and Standard Dial Plate -- Linear Type 10% -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Vertical or Horizontal One-Hole Mounting Potentiometer Ohms 2 Watt (60V Max.) Single Potentiometer with Standard Aluminum Dial Plate Catalogue Number With Standard Aluminum Dial Plate 1000 2500 5000 10000 25000 50000 10250T331 10250T332 10250T338 10250T333 10250T334 10250T335 Operator Only 10250T330 Alternative -- Black Plastic Large Legend with Standard Markings E34LP99 Dimensions in Inches (mm) Price Large Dial Plate 1.88 (47.8) Std. Dial Plate 1.09 1.0 (27.7) (25.4) 0.94 (23.9) 1.31 (33.3) 0.94 (23.9) 0.94 (23.9) 0.75 (19.1) Potentiometer Large dial plate with space for legend is available at no charge. To order, add suffix 36 to Catalogue Number. Example: 10250T33136. To order separately, see footnote below. Large dial plate has space at top for 15 letters. 3/32 inch high. For custom stamped legend plates, order legend plate as separate item 10250TR30 and specify stamping. For use with commercially purchased potentiometers having shaft dimensions per dimension drawing on Page 2-166. Accessories. . . . . . . . . .Pages 2-162 - 2-163 Additional Light Units. . .. . . . . . ..Page 2-142 Dimensions. . . . .. . . . . . Pages 2-165 - 2-167 Enclosures. .. . . .. . . . . . Pages 2-160 - 2-161 Legend Plates .. . . . . .. .Pages 2-158 - 2-159 Replacement Lamps/LEDs. . . . . Page 2-171 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-135 10250T Series, Assembled Devices -- Selector Switch Units Selector Switch Units 4-Position Maintained Switch Catalogue Number 10250T46KB 3-Position Maintained Switch Catalogue Number 10250T21KB Two-, Three- and Four-Position Maintained Non-illuminated and Illuminated Table 2-228. 2-Position Selector Switch -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position X O O X Operator Non-illuminated Action Black Knob Black Lever M Catalogue Number Catalogue Number 10250T20KB 10250T20LB Illuminated -- 120V Transformer Price Red Knob Red Lever Catalogue Number Catalogue Number 10250ED1117-KR 10250ED1117-LR Contact Type Price Mounting Location A B 1NC 1NO M X = closed circuit, O = open circuit. M = Maintained. S = Spring return in direction of arrow (R ). To order different type or colour selector switch, substitute the underlined character with appropriate Suffix Code from the Colour Selection table. Example: 10250T20KG. 2 Table 2-229. 3-Position Selector Switch -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position X O O O O X X O O Operator Action M M O X O O O X Non-illuminated Illuminated -- 120V Transformer Contact Type Black Knob Black Lever Price Red Knob Red Lever Catalogue Number Catalogue Number Catalogue Number Catalogue Number 10250T21KB 10250T21LB 10250ED1117-2KR 10250ED1117-2LR 1NO 1NO 10250T22KB 10250T22LB 10250ED1117-3KR 10250ED1117-3LR 1NO Price Mounting Location A B M 2NC (Series) 1NO X = closed circuit, O = open circuit. M = Maintained. S = Spring return in direction of arrow (R ). To order different type or colour selector switch, substitute the underlined character with appropriate Suffix Code from the Colour Selection table. Example: 10250T20KG. Table 2-230. 4-Position Selector Switch -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position X O O O O X O O O O X O O O O X Operator Action M M M Non-illuminated Illuminated -- 120V Transformer Black Knob Black Lever Catalogue Number Catalogue Number 10250T46KB 10250T46LB Price Red Knob Red Lever Catalogue Number Catalogue Number 10250ED1117-4KR 10250ED1117-4LR Contact Type Price Mounting Location A B 1NC 1NO 1NO 1NC M X = closed circuit, O = open circuit. M = Maintained. S = Spring return in direction of arrow (R ). To order different type or colour selector switch, substitute the underlined character with appropriate Suffix Code from the Colour Selection table. Example: 10250T20KG. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-231. Colour Selection Colour Black Red Green Code Letter Colour Nonilluminated Illuminated B R G -- R G White Blue Code Letter Colour Nonilluminated Illuminated W L W B Orange Amber Clear Code Letter Nonilluminated Illuminated O -- -- -- A C Accessories . . . . . . . . . . . . . Pages 2-162 - 2-163 Additional Circuit Arrangements . . . . . . . . . Pages 2-143 - 2-144 Dimensions. . . . . . . . . . . . . . Pages 2-165 - 2-167 Enclosures . . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates . . . . . . . . . . . Pages 2-158 - 2-159 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-136 July 2001 10250T Series, Assembled Devices -- Joystick & Roto-Push Units Joystick Units Table 2-232. Joystick Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Position Two-Position Up Center Down O O X Operator Action 2-Position Assembled Unit Catalogue Number Price Contact Mounting Location Type A B 10250T452-3X S 1NC M O O S X 1NC X = closed circuit, O = open circuit. M = Maintained. S = Spring return in direction of arrow (R ). Field convertible momentary to maintained or vice versa. Roto-Push(R) Units 2 Locating Nib Two-Position Momentary Complete assembled Two-Position Roto-Push Units are listed below. These operators have black flush buttons and are arranged for vertical mounting. Order legend plates separately. A B Roto-Push -- Black Flush Button for Vertical Mounting Catalogue Number 10250T24111-1 Figure 2-49. Mounting Location Table 2-233. Roto-Push Units -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Typical Applications (Most Common Examples) Operator Position Collar Left Roto-Push Assembled with Contact Blocks Collar Center Collar Right Catalogue Number Contact Mounting Location Type A Price B Normal Depressed Normal Depressed Normal Depressed 2-Position FORWARD/REVERSE; HIGH/LOW; OPEN/CLOSE; UP/DOWN; etc. O O O X O X O O JOG/RUN; MAN./AUTO; etc. O O X O O X X X 10250T24111-2 1NO 1NO RUN/JOG; START/JOG; etc. O X X X O O X O 10250T24111-1 1NO 1NC SAFE/RUN; etc. O O O O O X X X 10250T2415-2 1NO 1NO O X X X O O X O 10250T2417-1 1NO 1NC 10250T2411-2 1NO 1NO 3-Position RUN/SAFE/JOG; AUTO/OFF/HAND; etc. O O O O For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Two-Position Latched The Two-Position Roto-Push Latch Unit is fully assembled and only requires a legend plate for a great variety of applications. When the selector collar is in the extreme left position, the button is in the free or normal position and can be operated as a standard pushbutton. Rotating the collar to the extreme right position automatically depresses and latches the button in the depressed position. The white filled groove in the button indicates the selector collar position. The selector collar has spring return to the left position except when in the extreme right latched position. Table 2-234. Rotates to a Latch-Out Mode Colour and Type of Button Contact Catalogue Block Number Vertical Mounting Red Long 1NC 2NC Price 10250T72 10250T73 Accessories . . . . . . . . . . . . Additional Circuit Arrangements . . . . . . . . Dimensions . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . Legend Plates. . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Pages 2-143 - 2-144 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-137 10250T Series, Momentary Pushbutton Components Product Selection -- Components Pushbuttons Flush Button -- Black Catalogue Number 10250T101 Extended Button -- Red Catalogue Number 10250T112 Half Shrouded Button -- Green Catalogue Number 10250T503 Mushroom Head Button -- Yellow Catalogue Number 10250T124 Jumbo Mushroom Head Button -- Red Catalogue Number 10250T172 Table 2-235. Momentary Pushbutton Operators, Non-illuminated -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Colour Flush Button Extended Button Catalogue Number Black Red Green Yellow Grey White Blue Orange Price 10250T101 10250T102 10250T103 10250T104 10250T105 10250T106 10250T108 10250T109 Catalogue Number Half Shrouded Button Price Vertical Horizontal 10250T501 10250T502 10250T503 10250T504 -- 10250T505 10250T506 10250T508 10250T509 10250T511 10250T512 10250T513 10250T514 10250T515 10250T516 10250T518 10250T519 10250T111 10250T112 10250T113 10250T120 -- 10250T116 10250T118 10250T119 2 Price To order operator with factory assembled Extended Retaining Nut, 10250TA12, for thick panel applications, add Suffix Letter E to listed Catalogue Number. Example: 10250T101E Table 2-236. Mushroom Head Momentary Pushbutton Operators, Non-illuminated -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Colour Catalogue Number Black Red Red (EMERG. STOP) Green Yellow Blue Clear Jumbo Mushroom Button Mushroom Button 10250T121 10250T122 -- 10250T123 10250T124 10250T129 -- Price Catalogue Number Low Operating Force -- Jumbo Mushroom Price Catalogue Number 10250T171 10250T172 -- 10250T17213 10250T173 10250T174 -- -- -- Price 10250ED1164-2 10250ED1164-3 -- 10250ED1164-4 10250ED1164-5 -- -- -- 10250ED1164 Anodized aluminum head is not suitable for use in ultraviolet light applications. Operating Force -- Standard = 2.4 lb; Low Force = 1.6 lb. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Note: To order complete assembled unit using one composite Catalogue Number, add Contact Block and Legend Plate Suffix to the end of Operator Catalogue Number. Example: 10250T101-1TS33 Operator 10250T101 Contact Block 10250T1 Legend Plate 10250TS33 Accessories . . . . . . . . . . . . . Pages 2-162 - 2-163 Contact Blocks . . . . . . . . . . Page 2-157 Dimensions. . . . . . . . . . . . . . Pages 2-165 - 2-167 Enclosures . . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates . . . . . . . . . . . Pages 2-158 - 2-159 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca -- -- Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-138 July 2001 10250T Series, Interlocked and Padlockable Components Pushbuttons (Continued) Table 2-237. Mechanically Interlocked Pushbutton Operators -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Description 2 Catalogue Number Minimum hole centers 1.62", maximum 250". Mounts in extra deep enclosures only. Black flush and green flush Black flush and long red Black flush and red mushroom head Black flush and lock-down red mushroom head 10250TA66 10250TA67 10250TA68 10250TA69 Black flush and red jumbo mushroom head Green flush and long red Black long and long red Green flush and red mushroom head Green flush and black flush 10250TA76 10250TA72 10250TA73 10250TA77 10250TA75 Price Overall Dimensions in Inches (mm) Adjustable 1.62 (41.1) Min. 2.5 (63.5) Max. 0.88 (22.4) for Each Additional Contact Block 1.07 (27.2) 0.89 (22.6) NC contacts must be mounted behind lock-down mushroom head operator to ensure lockout. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Lockout Pushbutton Operators with Padlock Attachments The following pushbutton and mushroom operators include an integral padlock attachment for applications requiring lockout/tagout of specific machine functions. They are available in styles which allow locking of a button in the down position Table 2-238. Padlockable in the Down Position (stopped position) or locking a button in the up position (to prevent starting). Select the "Hand" latch type which functions as a momentary pushbutton until the operator presses the button and moves the padlock attachment into position for locking, or choose the -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Type Colour Latch Type Catalogue Number Flush Head Hand 10250TA16 Red "Spring Loaded" latch type where the padlock attachment springs into place when the button is pressed. Units accept a customer supplied 1/4" padlock. Price Overall Dimensions in Inches (mm) 1.13 (28.7) Mushroom Head Red Red Hand 10250TA42 Spring Loaded 10250TA45 Jumbo Head Red Hand 10250TA52 Red Spring Loaded 10250TA55 Red (EMERG. STOP) Spring Loaded 10250ED952 1.78 (45.2) 2.03 (51.6) 2.0 (50.8) 1.09 (27.7) Operators can be latched down without a padlock. Padlock not included. Jumbo mushroom heads are not recommended for use in applications where exposure to ultraviolet light exists. Table 2-239. Padlockable in the Up Position -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Type Colour Latch Type Catalogue Number Mushroom Head Black Green Hand Hand 10250TA41 10250TA43 Price Overall Dimensions in Inches (mm) 2.5 (63.5) 1.63 (41.4) 2.0 (50.8) 1.75 (44.5) 1.5 (38.1) Jumbo Mushroom Head Black Green Yellow Hand Hand Hand 10250TA51 10250TA53 10250TA54 2.31 (58.7) 2.38 (60.5) 1.75 (44.5) 2.5 (63.5) Operators can be latched down without a padlock. Padlock not included. Jumbo mushroom heads are not recommended for use in applications where exposure to ultraviolet light exists. Note: Hand Attachment must be manually moved into place for locking. Spring Loaded: when operator is pressed -- attachment springs into place. Must be moved manually to release button. Contact Blocks . . . . . . . . . . . Page 2-157 Enclosures . . . . . . . . . . . . . . Pages 2-160 - 2-161 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-139 10250T Series, Special Pushbutton Components Pushbuttons (Continued) Key Pushbutton Operator These devices incorporate an integral locking mechanism which enables locking units in various positions (Locked Down), locking units to prevent operation (Locked Up) or setting unit to lock when the button is pressed (Push to Lock), requiring the key to be inserted to return to normal operation. With the key in the center position, these operators function as a normal momentary pushbutton (Free). Replacement Keys or Dissimilar Locks for Key Operators Below Table 2-240. Replacement Keys Listed operators have identical locks and keys (Key Code H661) Catalogue Number 10250ED824. For dissimilar lock and key combinations, see listing on Page 2-146. Description Catalogue Number Replacement Keys (Code H661) 10250ED824 Price Table 2-241. Key Pushbutton Operator -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Key Position and Pushbutton Operations C L R Key Removal Positions Overall Dimensions in Inches (mm) Vertical Mounting Catalogue Number Price 3-Position Lock Up Lock Up Lock Up Free Free Free Lock Down Lock Down Lock Down All L and R C and R 10250T430 10250T431 10250T432 Free Free Free Free Free Free -- -- Lock Down Lock Down Push to Lock Push to Lock L and C L C and R R C and R R 10250T433 10250T434 10250T435 10250T436 10250T437 10250T438 1.13 (28.7) 1.38 (35.1) 2-Position Lock Up Lock Up -- -- -- -- 1.5 (38.1) Key Operated Pushbutton Horizontal mounting available on request. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Latch-In, Twist-to-Release Operator Table 2-242. Operator Only with Button -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Description Catalogue Number Latch-In, Twist-to-Release Operator with Red Mushroom Head Button 10250ED1043-4 Price Dimensions in Inches (mm) 0.24 (6) 0.86 (21.8) 1.55 (39.3) Spring Return 2.37 (60.3) Auto-Latch 1.5 (38.1) Accessories . . . . . . . . . . . . . Contact Blocks . . . . . . . . . . Dimensions. . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . . Legend Plates . . . . . . . . . . . CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Pages 2-157 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 2 Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-140 July 2001 10250T Series, Illuminated Components Illuminated Pushbuttons and Indicating Lights LED or Incandescent Full Voltage, Resistor or Transformer Type 120V AC Transformer Illuminated Pushbutton without Lens Cat. No. 10250T411H 24V Full Voltage Indicating Light without Lens Cat. No. 10250T206H Table 2-243. Operators without Lens Light Unit Type LED (LEDs not included) Type Voltage Indicating Light PresTest Catalogue Number Catalogue Number Price Catalogue Number LED/Lamp Number Price -- 10250T397L 10250T197L 10250T297L -- -- 24 120 240 277 380 480 600 10250T416L 10250T411L 10250T412L 10250T419L 10250T413L 10250T414L 10250T415L -- 10250T181L 10250T182L 10250T198L 10250T183L 10250T184L 10250T185L -- -- 10250T221L 10250T222L -- 10250T223L 10250T224L 10250T225L -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Full Voltage AC/DC 6 12 24 32 48 10250T473 10250T474 10250T476 10250T477 10250T478 10250T203N 10250T204N 10250T206N 10250T207N 10250T208N 10250T232N 10250T233N 10250T235N 10250T238N 10250T239N -- -- -- -- -- -- -- -- -- -- #755 #756 #757 #1828 #1835 Resistor AC/DC 120 240 10250T471 10250T472 10250T201N 10250T202N 10250T231N 10250T240N -- -- -- -- 120MB 120MB Transformer AC Only 24 120 240 277 380 480 600 10250T416 10250T411 10250T422 10250T419 10250T413 10250T414 10250T415 -- 10250T181N 10250T182N 10250T198N 10250T183N 10250T184N 10250T185N -- -- 10250T221N 10250T222N -- 10250T223N 10250T224N 10250T225N -- -- 10250T187N -- -- -- -- -- -- -- -- -- -- -- -- #755 Neon AC/DC 120 240 -- -- -- 10250T226N -- 10250T227N -- -- -- -- -- -- NE51H-R22 NE51H-R68 Solid-State 50/60 Hz Only 120 -- -- -- Table 2-244. Indicating and Master Test Lenses Colour Plastic Red Green Amber Yellow Blue Clear White -- -- -- -- Price 10250TC1N 10250TC2N 10250TC19N 10250TC3N 10250TC4N 10250TC5N 10250TC6N -- 10250T189N Bayonet Base See page 2-171 120MB For flashing lamp, add letter F to listed Catalogue Number. Example: 10250T181NF. Resistant to shock and vibration. For best illumination use amber, yellow or clear lens. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-246. PresTest Lenses Glass Catalogue Number Glass Master Test Price Transformer AC Only These units do not include lamps. Order LED separately to match lens colour. See Page 2-171 for LED Selection and Page 2-170 for Catalogue Numbering System. Resistor units are not available for use with LEDs, choose either transformer or full voltage LED style. Plastic Price Full Voltage 2 Incandescent Illuminated Pushbutton Catalogue Number Colour Plastic Catalogue Number Catalogue Number Price 10250TC7N 10250TC8N 10250TC9N -- 10250TC10N 10250TC11N 10250TC12N Plastic -- Glass Red Green Amber Yellow Blue Clear White 10250TC21 10250TC22 10250TC43 10250TC23 10250TC24 10250TC25 10250TC26 Glass Price Catalogue Number Price 10250TC13N 10250TC14N 10250TC15N -- 10250TC16N 10250TC17N 10250TC18N -- Table 2-245. Illuminated Pushbutton Lenses Colour Catalogue Number Red Green Yellow Amber Blue Clear White 10250TC21 10250TC22 10250TC23 10250TC43 10250TC24 10250TC25 10250TC26 Price Dimensions . . . . . . . . . . . . . Pages 2-165 - 2-167 Legend Plates . . . . . . . . . . . Pages 2-158 - 2-159 Replacement Lamps/LEDs. . . . . . . . . . . Page 2-171 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons & Indicating Lights Catalogue30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-141 10250T Series, Push-Pull Components Push-Pull Operators An illuminated Push-Pull pushbutton unit, arranged for one-hole mounting, can replace two pushbuttons and a pilot light or the non-illuminated form can replace two pushbuttons. These units are available in three basic types: The Operators, Buttons, Contact Blocks, etc., are offered as building block components that can be intermixed to satisfy many requirements. This minimizes the need for a varied and costly inventory. Maintained -- (Two-Position). Maintains in the pulled or pushed position until manually actuated to the opposite mode. Momentary -- (Three-Position). Spring returns to an intermediate position when pulled or pushed and released. Momentary Pull, Maintained Push -- (Three-Position). Spring returns to intermediate position when pulled. Maintains in pushed position until manually returned to intermediate (ready to reset) position. Maintained stop holds circuit open and will prevent other series connected operators from starting the system. Application Guide To assist in the selection of contact blocks, the sketch to the right shows pictorially by symbols A and B locations of contact circuits after assembly of contact blocks and adapter to the operator. The chart below shows the effect of the push and pull operations on either NO or NC contacts. (X = contact closed, O = contact open) 2-Position Maintained Push-Pull without Button on Lens Catalogue Number 10250T5 Locating Nib 2 A B Figure 2-50. Contact Circuit Locations Table 2-247. Push-Pull Operator Components Type of Operator Catalog Number Price Contact Block -- Max. of 2 Blocks, 4 Circuits Operator Position and Circuit Arrangement Out -- Pull Intermediate In -- Push Contact Block Mounting Location A B A B A B 2-Position Operator without Lens Maintained Push-Pull Maintained Push-Pull with Anti-Theft Jumbo Mushroom 10250T5 10250ED1080 1NO 1NC O or X O X 2NO 2NC O X O X 1NO 1NC O or X O X 2NO 2NC O X O X No Intermediate Position X or O X O X O X O X or O X O X O X O O X X or O O O O X X O O O O O X or O X O O O X O X O No Intermediate Position 3-Position Operator without Lens Momentary Push-Pull 10250T4 1NO 1NC O or X O X O O Maintained Push-Momentary Pull 10250T9 2NO 2NC O X O X O O Momentary Push-Pull 10250T10 1NO 1NC O or X O X O O 2NO 2NC O X O X O O or or Contact blocks 10250T55 and T57 can not be used with operator 10250T4, T9 or T10. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Button or Lens . . . . . . . . . . . Page 2-142 Contact Blocks . . . . . . . . . . Page 2-157 Dimensions. . . . . . . . . . . . . . Pages 2-165 - 2-167 Enclosures . . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates . . . . . . . . . . . Pages 2-158- 2-159 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons & Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-142 July 2001 10250T Series, Push-Pull Components Push-Pull Operators (Continued) Table 2-249. Alternate Lenses for Illuminated Push-Pull Devices Colour Push-Pull Light Units, Lenses and Buttons Catalogue Number Incand. LED Price Suffix Suffix Code Code 10250TC47 10250TC53 10250TC48 10250TC49 10250TC50 10250TC51 10250TC52 C47 C53 C48 C49 C50 C51 C52 Table 2-248. Light Units for Illuminated Push-Pull Devices Light Unit Type Type Full Voltage LED (LEDs not included) Incandescent 10250T97L LED/Lamp Number Standard Red Red (EMER. STOP) Green Blue Amber White Clear Bayonet Base Full Voltage AC or DC 10250T69 10250T70 10250T79 10250T83 See page 2-171 120 240 10250T80 10250T81 120MB or 28-3044 Heavy-Duty Aluminum with Transparent Center Transformer 24 AC Only 120 50/60 Hz 208 240 277 380 480 600 10250T89 10250T63 10250T64 10250T65 10250T82 10250T66 10250T67 10250T68 #755 or 28-2202 Red Green Amber 6 12 24/28 32 See page 2-171 Side-Lighted Anodized Aluminum Ring Red Red (EMER. STOP) Green Blue Amber Yellow White Clear C57 C63 C58 C59 C64 C60 C61 C62 10250TC65 C65 10250TC66 C66 10250TC67 C67 Colour RS ES GS LS AS YS WS -- RH GH AH Catalogue Number Suffix Code 10250TB62 10250TB63 10250TB61 10250TB60 10250TB64 B62 B63 B61 B60 B64 Price Standard Red Red (EMER. STOP) Green Black Blue Ordering example with one composite number: Jumbo Mushroom Head (Anodized) Aluminum Nonilluminated 10250T5 + 10250TB62 + 10250T1 = Red Red (EMER. STOP) Green Black Yellow 10250T5B62-1X Incandescent 10250T5 + 10250T79 + 10250TC47 + 10250T1 = 10250T579C47-1X 10250T5 + 10250T97L + 10250TC47 +Voltage Code + 10250T1 = 10250T597LRD24-1X 10250TC57 10250TC63 10250TC58 10250TC59 10250TC64 10250TC60 10250TC61 10250TC62 Table 2-250. Buttons for Non-illuminated Push-Pull Devices These units do not include lamps. Order LED separately to match lens colour, see Page 2-171. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. LED RD ED GD LD AD WD -- 10250T89L 10250T63L 10250T64L 10250T65L 10250T82L 10250T66L 10250T67L 10250T68L Resistor AC or DC -- Price Transformer 24 AC Only 120 50/60 Hz 208 240 277 380 480 600 2 Voltage Catalogue Number 06 -- 6V AC/DC 12 -- 12V AC/DC 24 -- 24V AC/DC 48 -- 48V AC/DC 60 -- 60V AC/DC 2A -- 120V AC 2D -- 120V DC 10250TJ62 10250TJ63 10250TJ61 10250TJ60 10250TJ64 J62 J63 J61 J60 J64 Anodized aluminum head is not suitable for use in ultraviolet light applications. Legend Plates For a complete listing of available Legend Plates see Pages 2-158 - 2-159. Jumbo Standard P S R T Figure 2-51. Legend Plates Accessories . . . . . . . . . . . . . Contact Blocks. . . . . . . . . . . Dimensions . . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . . Legend Plates. . . . . . . . . . . . Replacement Lamps/LED . . . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Page 2-157 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 Pages 2-171 CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-143 10250T Series, Components -- Selector Switch Selection Systematic Approach Table 2-251. Example Selection Table Application: HAND-OFF-AUTO Selector Switch. In this circuit, one incoming line is distributed to two other outgoing circuits by the switch. The two circuits can be looked at individually. Step 1: Elementary Diagram. Construct on paper, or in your mind, a simple elementary diagram of the switching scheme as follows: 10250T Series Selector Switch Selection HAND Selector switches in their varied forms (2-position, 3-position and 4-position) are a big factor contributing to the great flexibility of control that a well rounded line of "pushbuttons" can achieve. Because of their flexibility, they tend to cause difficulty with product selection and application. The following systematic approach should simplify that task. Cam and contact block selection is better understood if you: Work with each incoming and outgoing wire/circuit separately. Recognize the terms NO and NC only identify the type of contact by its mode before mounting to the operator. The "X-O" table (Page 2144) shows how that contact will act after assembly to the operator with the selected cam shape. X = closed circuit, O = open circuit. Up to six NO or NC contacts may be mounted behind each plunger location for a total of twelve contacts. Single circuit contact blocks have only one plunger with the other side of the block "open." Therefore, single circuit contact blocks transmit motion to blocks behind them only for the position containing the circuit. Each cam has two separate lobes, each of which operates one of the two contact block plungers independently of each other. Those are identified as position A (locating nib side) and position B (opposite of locating nib). The position designations give direction in selecting and mounting of the contact blocks (see Figure 2-52). Locating Nib A B Figure 2-52. Contact Circuit Locations CAT.201.01.T.K 1 X O O 4 O O X Cam Code #2 Cam Code #3 Top Bottom A B Top A Incoming Line Bottom B NO NC NO NO Cam and Contact Block Selection No. "X-O" Pattern NO Outgoing Circuit Outgoing Circuit Now to make the cam selection, make a simple worksheet such as: Wired in series. OFF AUTO Step 2: "X-O" Pattern. From the elementary diagram, you can construct an "X-O" diagram which describes when the contacts are to be closed (X) or open (O) in the various positions of the switch. The "X-O" for the HAND circuit looks like this: HAND OFF AUTO X O O In this circuit, you want a contact closed on the left (HAND) but open in the centre and right. For the AUTO circuit, the "X-O" diagram would look like this: HAND OFF AUTO O O X Putting them together, the complete "X-O" diagram is: XOO OOX Once the "X-O" diagram has been generated, the next step is to select the cam and contact block, or blocks, needed to perform the desired "X-O" functions. The selection table on the following page lists the various types (shapes) of cams by number to choose from and the type of contact and position to achieve the function outlined in your "X-O" diagram. Step 3: Cam Selection. The cam you select determines the operation of all contact blocks mounted to the operator. It is selected on the basis that it provides the simplest circuitry for the desired "X-O" diagram. The selection tables of the following page show all the "X-O" combinations. For the purpose of this example, the applicable portion of those tables is shown in Table 2-251. Cam 2 XOO OOX Cam 3 (A)NO - (B)NC (B)NO (A)NO (B)NO It becomes immediately obvious that cam 3 is the better choice for two reasons, (1) the series combination can be avoided making it simpler to wire, (2) only two contacts are required, which is less expensive than the three contacts required by cam 2. Step 4: Contact Block Selection. Having selected the cam, contact block selection is simply a matter of gathering the A position and B position circuits into pairs which make up the most convenient contact block arrangement. If there is an imbalance in the number of circuits under A or B, then single circuit blocks must be selected for these leftover circuits. Back to the worksheet, having selected cam 3 do this: X O X O O X ANO BNO 10250T2 Step 5: Selector Switch Operator. Lastly, you have to choose from the many types of operators -- knob and lever in various colours or keyed. Also what combinations of maintained and spring return functions are required. Selection of these operators can be found on Page 2-145. For the above example you may want a 3-position maintained black knob, cam 3 -- Catalogueue Number 10250T1323. The Complete Switch: 10250T1323 with one 10250T2 or, for one composite catalogueue number, 10250T21KB found on Page 2-135. For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-144 July 2001 10250T Series, Components -- Selector Switch Selection Selector Switch Selection (Continued) Table 2-253. 3-Position Switch -- Cam and Contact Block Selection No. Table 2-252. 2-Position Selector Switch Contact Block Selection No. Desired Circuit and Operator Position Contact Blocks Required to Accomplish Circuit Function Top Plunger A Bottom Plunger B 1 2 1 X O X 2 X O Operator with Cam Code #2 Operator with Cam Code #3 Mounting Location Mounting Location Top Plunger A Bottom Plunger B Top Plunger A NO NC NO O X O NC X O NC X NO OR NO NO 4 O O NO NO X NO Diagrams Circuits shown illustrate connections to obtain a selector switch circuit combination and are shown with their appropriate line diagrams. Field wiring of jumper connections required as shown. 5 O X X NC 6 O NO X NO NC O NC NC NC Table 2-254. 4-Position Switch -- Contact Block Selection X = Closed Circuit O = Open Circuit No. Desired Circuit and Operator Position Contact Blocks Required to Accomplish Circuit Function Com- Desired Circuit and bina- Operator Position tion No. Mounting Location Series Connection Bottom Plunger B NC 3 O X Contact Blocks Required to Accomplish Circuit Function (Jumpers must be installed where indicated) OR NC 2 Desired Circuit and Operator Position Parallel Connection Top Plunger A Figure 2-53. Wiring of Jumper Connections Note: 4-Position Selector Switches limited to 4 contact blocks. Contact Blocks For selection and number of available contact blocks per operator, see Page 2-157. 1 X O O Mounting Location Bottom Plunger B O X O Top Plunger A 10 X O X O NC NO O NO 3 O O X O NO 4 O O O 11 X X X O X NC NO NC 5 6 7 8 9 X O O X O O X O X X O X X O O Bottom Plunger B O NC 2 Contact Blocks Required to Accomplish Circuit Function NO X NC NC NO NO NO NC NC NO 12 O X X X O NO NC NO X 13 X O X X O X NO NC 14 NO NC For more information contact Cutler-Hammer at: www.cutler-hammer.ca X X O NC X NC NO NC CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-145 10250T Series, Selector Switch Components Selector Switch Operators 2-Position Maintained Black Knob Selector Switch -- Cam 1 Cat. No. 10250T1311 3-Position Maintained Black Lever Selector Switch -- Cam 3 Cat. No. 10250T3023 2-Position Maintained Horizontal Mount, Key Removal #1 Keyed Selector Switch -- Cam 1 Cat. No. 10250T16111 Selector Switch Operators with Caps Table 2-255. Selector Switch Operators with Caps -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Operator Action Black Knob Selector Switch -- Vertical Mounting Positions 2-Position -- 60 Throw Catalogue Number 10250T1311 1 10250T3011 1 10250T1371 1 10250T3071 M 2 3 10250T1322 10250T1323 2 3 10250T3022 10250T3023 M 2 3 10250T1332 10250T1333 2 3 10250T3032 10250T3033 S 2 3 10250T1342 10250T1343 2 3 10250T3042 10250T3043 S 2 3 10250T1352 10250T1353 2 3 10250T3052 10250T3053 7 10250T1367 7 10250T3067 M M S 3-Position -- 60 Throw M M M S M S M M M 4-Position -- 40 Throw M M Catalogue Number 1 Black Lever Selector Switch -- Vertical Mounting Cam Code M Cam Code Price Price 2 M M = Maintained. S = Spring return in direction of arrow (R ). For selection of the proper cam and contact block to obtain the proper circuit sequence, see selection instructions and table on Pages 2-143 - 2-144. Field convertible to Horizontal Mounting or order operator only and separate operator cap. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-256. Key Operators with Cam -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Positions 2-Position -- 60 Throw 3-Position -- 60 Throw Operator Action Horizontal Mounting 1 10250T1511_ 10250T1611_ 1, 2, 3 1 10250T1571_ 10250T1581_ 2 2 3 10250T1522_ 10250T1523_ 10250T1622_ 10250T1623_ 1-7 M 2 3 10250T1532_ 10250T1533_ 10250T1632_ 10250T1633_ 1, 4, 5 M 2 3 10250T1542_ 10250T1543_ 10250T1642_ 10250T1643_ 4 S 2 3 10250T1652_ 10250T1653_ 10250T1662_ 10250T1663_ 2, 4, 6 S 7 10250T1677_ 10250T1687_ 7 M M S M M S M S M M 4-Position -- 40 Throw M M Optional Key Removal Positions Catalogue Number Vertical Mounting M M Cam Code M Price M M = Maintained. S = Spring return in direction of arrow (R ). For selection of the proper cam and contact block to obtain the proper circuit sequence, see selection instructions and table on Pages 2-143 - 2-144. Choose key removal position required for application from Table 2-257 on Page 2-146. Add key removal Code No. to listed Catalogue Number. Example: 10250T15112. Accessories . . . . . . . . . . . . Contact Blocks . . . . . . . . . Dimensions. . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . Legend Plates . . . . . . . . . . CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Page 2-157 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-146 July 2001 10250T Series, Selector Switch Components Selector Switch Operators (Continued) Selector Switch Operators with Dissimilar Locks and Keys -- UL (NEMA) 4, 4X and 13 Table 2-257. Key Removal Positions Code Suffix Key Removal Positions Code Suffix Key Removal Positions 1 2 3 4 Right Only Left Only Right & Left Centre Only 5 6 7 Right & Centre Left & Centre All Positions Note: Key removal in "spring return from" positions not recommended. C L R 2 Figure 2-54. Key Removal Positions Replacement Keys or Dissimilar Locks for Key Operators Operators listed on Page 2-145 have identical locks and keys (Key Code H661) Catalogue Number 10250ED824. For dissimilar lock and key combinations, see listing at right. Table 2-258. Replacement Key Description Catalogue Number Replacement Keys (Code H661) 10250ED824 Price The locks in all key operators listed on Pages 2-139, 2-145 and 2-189) are identical and use key code number H661. Two keys are supplied with every lock. For additional code number H661 keys, order Catalogue Number 10250ED824. For others, order 10250ED1130 and designate lock number. When dissimilar locks for each operator or each group of operators are required, select from the lock and key combination listed below. When Ordering Operator Only or a Complete Control Unit with a substitute lock, order from table below and add "except Lock and Key Code No. ..." Table 2-259. "H" Series Locks without Master Key -- with Key Slot Cover Lock and Key Code Numbers Adder Table 2-260. "M" Series Locks with Master Key -- with Key Slot Cover MD1 MD2 MD3 MD4 MD5 MD7 MD9 MD10 MD11 MD13 H635 H639 H643 H654 H663 H675 H683 H688 MD14 MD15 MD16 MD19 MD20 ME2 ME3 ME5 ME6 ME7 ME8 ME11 ME16 ME17 ME18 ME19 MJ1 MJ3 MJ4 MJ5 MJ6 MJ10 MJ11 MJ13 MJ15 MJ16 MD17 Table 2-261. Master Keys for Above Locks Application For Code: MD1 - MD20 ME2 - ME18 MJ1 - MJ16 H501 H620 H621 H634 Adder Lock and Key Code Numbers Catalogue Number Price 10250ED825-3 10250ED825-4 10250ED825-5 For pricing informaiton, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. High Security Locks Please contact the Cutler-Hammer Customer Support Centre 1-800-268-3578 for Level 2 security lock sets. For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-147 10250T Series, Selector Switch Components Selector Switch Operators (Continued) Selector Switch Operators without Caps 2-Position Selector Switch Maintained, Cam Code 1 Catalogue Number 10250T4011 Note: Operators below can be ordered with caps assembled to them by adding the Code Number from Table 2-263 to the end of Catalogue Number below. Example: 10250T4011KB Table 2-262. Selector Switch Operators without Caps Operator Action Positions 2-Position -- 60 Throw Cam Code Catalogue Number Price 1 10250T4011 1 10250T4081 M 2 3 10250T4022 10250T4023 M 2 3 10250T4032 10250T4033 S 2 3 10250T4042 10250T4043 S 2 3 10250T4052 10250T4053 7 10250T4067 M M M S 3-Position -- 60 Throw M M M S M S M M 4-Position -- 40 Throw M M M 2 M M = Maintained. S = Spring return in direction of arrow (R ). For selection of the proper cam and contact block to obtain the proper circuit sequence, see selection instructions and table on Pages 2-143 - 2-144. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-263. Operating Caps Colour Knob Catalogue and Code Number Lever Price Catalogue and Code Number Black Red Green Yellow White Grey Blue Orange 10250TKB 10250TKR 10250TKG 10250TKY 10250TKW 10250TKA 10250TKL 10250TKO 10250TLB 10250TLR 10250TLG 10250TLY 10250TLW 10250TLA 10250TLL 10250TLO Colour Lever Coin Slot Catalogue and Code Number Black Red Green Yellow White Grey Blue Orange 10250TSB 10250TSR 10250TSG 10250TSY 10250TSW 10250TSA 10250TSL 10250TSO Price Catalogue and Code Number 10250TCB 10250TCR 10250TCG 10250TCY 10250TCW 10250TCA 10250TCL 10250TCO Designed for added ingress protection. For use in maintained operators only. CAT.201.01.T.K Price Price Accessories . . . . . . . . . . . . . Contact Blocks . . . . . . . . . . Dimensions. . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . . Legend Plates . . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Page 2-157 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-148 July 2001 10250T Series, Selector Switch Components Illuminated Selector Switch Operators 2-Position Maintained 120V AC Transformer Selector Switch, Cam Code 1 Catalogue Number 10250T5971 Illuminated Selector Switches without Caps Table 2-264. Operator without Knob or Lever Operator Action Positions 2-Position - 60 Throw M 2 M 3-Position - 60 Throw M M M M M S M S M M S S 4-Position - 40 Throw M M M M Transformer Type -- 50/60 Hz 6 Volt #755 Lamp Voltage Cam Catalogue and Code Number Code 24 120 208 240 380 480 600 24 120 208 240 380 480 600 24 120 208 240 380 480 600 24 120 208 240 380 480 600 24 120 208 240 380 480 600 24 120 208 240 380 480 600 10250T5961 10250T5971 10250T6511 10250T5981 10250T5991 10250T6001 10250T6011 10250T602_ 10250T603_ 10250T652_ 10250T604_ 10250T605_ 10250T606_ 10250T607_ 10250T654_ 10250T620_ 10250T655_ 10250T656_ 10250T657_ 10250T658_ 10250T659 10250T660_ 10250T621_ 10250T661_ 10250T662_ 10250T663_ 10250T664_ 10250T665_ 10250T614_ 10250T615_ 10250T653_ 10250T616_ 10250T617_ 10250T618_ 10250T619_ 10250T6087 10250T6097 10250T6547 10250T6107 10250T6117 10250T6127 10250T6137 Price Full Voltage Type -- AC or DC Lamps: 6V -- #755, 12V -- #756, 24V -- #757, 48V -- #1835, 120/240V -- 120MB Voltage Catalogue and Cam Price Code Number Code 1 6 12 24 48 120 240 10250T6201 10250T6211 10250T6221 10250T6231 10250T6361 10250T6371 1 + 2 or 3 6 12 24 48 120 240 10250T624_ 10250T625_ 10250T626_ 10250T627_ 10250T638_ 10250T639_ + 2 or 3 + 2 or 3 6 12 24 48 120 240 10250T612_ 10250T632_ 10250T642_ 10250T672_ 10250T622_ 10250T682_ + 2 or 3 + 2 or 3 6 12 24 48 120 240 10250T613_ 10250T633_ 10250T643_ 10250T673_ 10250T623_ 10250T683_ + 2 or 3 + 2 or 3 6 12 24 48 120 240 10250T628_ 10250T629_ 10250T630_ 10250T631_ 10250T640_ 10250T641_ + 2 or 3 7 6 12 24 48 120 240 10250T6327 10250T6337 10250T6347 10250T6357 10250T6427 10250T6437 7 M = Maintained. S = Spring return in direction of arrow (R ). Operator includes lens gasket and lens attachment screws. For selection of the proper cam and contact block, to obtain the proper circuit sequence, see selection table on Pages 2-143 - 2-144. Full voltage light units can be used at other than listed voltages by changing lamp. Replacement lamps are listed on Page 2-171. Resistor type. May generate excess heat if used in high density. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-265. Illuminated Knobs and Levers Colour Knob Lever Cat. and Code No. Red Green Yellow Blue 10250TER 10250TEG 10250TEA 10250TEL Price Cat. and Code No. 10250TFR 10250TFG 10250TFA 10250TFL Colour Knob Cat. and Code No. Price Clear White Amber 10250TEC 10250TEW 10250TEM Lever Price Cat. and Code No. Price 10250TFC 10250TFW 10250TFM Amber, Clear and White lenses have a black arrow (pointer), Red, Green and Blue lenses have a white arrow (pointer). Accessories . . . . . . . . . . . . Contact Blocks . . . . . . . . . . Dimensions . . . . . . . . . . . . . Enclosures . . . . . . . . . . . . . Legend Plates. . . . . . . . . . . For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pages 2-162 - 2-163 Page 2-157 Pages 2-165 - 2-167 Pages 2-160 - 2-161 Pages 2-158 - 2-159 CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-149 10250T Series, Joystick Components Joysticks Two-Position Joystick Operators The device mounts in the standard 30.5 mm mounting hole. Allow sufficient panel space for lever movement. The maximum travel of the knob operator (full up to full down) is 2.2" (24) momentary, 2.5" (30) maintained, but ample space for lever operation must be allowed. These operators are field convertible from momentary to maintained operation or vice versa. The use of NC contacts is preferred because they provide positive drive contact opening and a direct relationship between lever movement and affected terminal, i.e., up movement affects the top terminals. 2-Position Joystick Operator Table 2-266. 2-Position Joystick Operators -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Contact Block Limitations Description Momentary Mode 4NC Contact Blocks Max. 3NO Contact Blocks Max. 2-Position Operator Only -- AC Applications Only Catalogue Number Momentary Up and Down Maintained Up -- Momentary Down Maintained Down -- Momentary Up Maintained Up and Down Maintained Mode 2 Contact Blocks Max. Price Overall Dimensions in Inches (mm) Contact 0.89 Block (22.6) 10250T452 10250T4521 10250T4522 10250T4525 2.2 (55.9) mom. 2.5 (63.5) main. 2.06 (52.3) 2.13 (54.1) 0.88 (22.4) per Block 2 3.88 (98.6) 0.06 (1.5) to 0.26 (6.6) Panel Thickness 1.25 (31.8) Field convertible momentary to maintained or vice versa. To expedite shipment of maintained types, order momentary operator 10250T452 which is a stocked device. Table 2-267. Contact Block Operation and Selection Handle Position Up Centre Catalogue Number Mounting Location Contact Block Down Price Type X O O 10250T51 O O X 10250T51 1NC O X O 10250T45 2LONC (Series) X O O 10250T3 1NC O O X X X O 10250T45 1LONC Top Bottom A B 1NC 1NC O X X X O O 1LONC O O X 1NO O O X 1NC X O O 1NO 10250T44 1NC Bolded circuit corresponds to "X-O" circuit selection. X = closed circuit, O = open circuit. See Figure 2-55 for "A" and "B" mounting location. NO = Normally Open, NC = Normally Closed, LONC = Late Opening Normally Closed. Four circuits in single block depth -- rated 300V max. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Figure 2-55. A and B Mounting Location jogging, etc. Excessive arcing and deterioration of the contacts will occur. Locating Nib Top Contacts Up Center Bottom Contacts Up NC Contact at Top Is Closed, NO at Bottom Is Closed CAT.201.01.T.K Down Center All NC and NO Contacts Are Open (1/2 Way), Late Opening NC Is Closed Down NC Contact at Bottom Is Closed, NO at Top Is Closed Application Caution Joystick operators are not recommended on certain DC applications above 24V DC which may involve lightly engaging the contacts (teasing) to achieve speed control, positioning, Contact Blocks . . . . . . . . . . Page 2-157 Enclosures . . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates . . . . . . . . . . . Pages 2-158 - 2-159 For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-150 July 2001 10250T Series, Joystick Components Joysticks (Continued) Four-Position Joystick Operators The joystick operated control unit is intended for AC application only. For other use, see Application Caution on preceding page. The panel area required for the 4-position operator is equivalent to two standard pushbutton operators. Note: The latch holds the lever in the centre position. The trigger latch must be released before lever can moved into any position. 4-Position Joystick Operator 4-Position Joystick Operator with Latch Table 2-268. 4-Position Joystick Operators -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 2 Contact Block Limitations Description Catalogue Number 4 Contact Blocks Max. -- 2 in Each Position Operator Only -- AC Application Only 4-Position -- without Latch 4-Position -- with Latch Price Overall Dimensions in Inches (mm) 10250T451_ 10250T461_ 1.25 (31.8) 4.0 (101.6) Hole Plug To plug unused hole 10250TA7 1.88 (47.8) 0.88 (22.4) per Unit 1.19 (30.2) 3.75 (95.3) Momentary operators -- spring return to centre. For maintained operators add Suffix Code from Table 2-269. Example: 10250T45110. Operator without latch, maintained in left and right positions. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Field Conversion -- Gate The factory assembled 4-position operator is assembled with a gate arranged for four handle positions. 4-Position Gate Figure 2-56. Handle Positions Left Up Three additional gates, supplied with every operator, allow on the job conversion to 3- or 8-position operation as illustrated below. or 2-Position Gate or or The 8-position gate controls the four functions shown as "Up," "Down," "Left" and "Right." The remaining four diagonal positions each actuate two adjacent functions (see Figure 2-58); for example, "Left Down" actuates both "Left" and "Down." The operator may be arranged for spring return of handle to centre position, or maintained in up to eight positions (see description of maintained position operator). Left Left Down or 3-Position Gate Up Right Up Right Down Right Down Table 2-269. Maintained Positions Maintained Positions Up Down Left Right Suffix Number X -- -- -- X X X -- -- -- X X X -- X -- X -- -- X -- -- X X -- X X -- X X -- -- X -- -- X -- X -- X X -- X X X -- -- -- X -- -- X -- X X -- X X X X 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Note: On an 8-position gate, when an adjacent vertical and horizontal position are both maintained, the included diagonal position is also maintained. Figure 2-58. Adjacent Functions Maintained Position 8-Position Gate Figure 2-57. 2-, 3- or 8-Position Operation For maintained position (non-spring return), locate required maintained position or positions of operating lever in Table 2-269 and add appropriate Suffix Number to the Catalogue Number selected from Table 2-268. Contact Blocks . . . . . . . . . . Page 2-157 Enclosures . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates. . . . . . . . . . . Pages 2-158 - 2-159 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-151 10250T Series, Joystick Components Joysticks (Continued) Four-Position Joystick Operators (Continued) Contact Block Operation Contact blocks mount directly to the back of the operator. For reliable operation, the maximum number of contact blocks that should be installed behind each operator lever is 2 (4 total). The contact blocks and their mounting locations would be as follows: 2nd 1st Circuit Circuit Figure 2-59 identifies the circuits activated by each of the eight possible lever positions. Contact block plungers 1, 2, 3, 4 are depressed (change state) when handle is in the position indicated by arrows below. NO NO NC NO 10250T1 10250T2 NC Table 2-271. Example Order Qty. Catalogue Number 1 2 2 10250T451 10250T2 10250T1 4 Note: Joystick in its resting state, centre position, does not activate contact block plungers. Ordering Example: Suppose you are looking for a 4-position momentary joystick without a latch and the following circuit arrangements. X = Closed Circuit, O = Open Circuit. Table 2-270. Example Circuit Arrangements Table 2-272. 2-Position K K A complete bill of material for this example would include: Figure 2-59. Circuit Activation Catalogue No.: 10250TJ2S4STAMP Letter Size: 3/16 inch (4.8 mm) Pos. K -- UP Pos. M -- DOWN NO NO 10250T1 10250T2 1 3 2-position legend plate to be marked "UP" "DOWN." NO Figure 2-60. Example Contact Blocks and Locations 2 Ordering Example: 2.19 (55.6) Sq. N M M Catalogue Number Catalogue Number Price Blank Plate 10250TJS3 10250TJS4 Engraved Plate 10250TJS3STAMP 10250TJS4STAMP Table 2-273. 4-Position Blank Legend Plates for Joystick Operators C When ordering engraved legend plates, order by Catalogue Number and insert the following into Order Notes: Legend required Size of characters: 3/16, 1/8, 3/32 inch (4.8, 3.2, 2.4 mm) Location by letter (A - N) L A B D C F E G J H A B D F E G J H Up Down Left Right 1st Circuit X X X X Locations K and M can accommodate up to 2 lines horizontally; L and N up to 2 lines vertically. 2nd Circuit X O O X Maximum number of characters: Horizontal 3/16" -- 13, 1/8" -- 14, 3/32" -- 19 Vertical 3/16" -- 10, 1/8" -- 13, 3/32" -- 14 Catalogue Number Catalogue Number Price Blank Plate 10250TJS1 10250TJS2 Engraved Plate 10250TJS1STAMP 10250TJS2STAMP For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Contact Blocks . . . . . . . . . . . . . . . . . . . Page 2-157 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-152 July 2001 10250T Series, Roto-Push Components Roto-Push Operators 2 Roto-Push Components When Ordering Specify A Roto-Push control unit combines the function of a pushbutton and a selector switch. The contacts are operated by the combined action of rotating the outer collar and pushing a button contained in the collar. In selecting the cam and contact blocks for the listed function, the analysis involves considering the function with the collar rotated to the given position with the button free (designated as "N") and then in that same position with the button depressed (designated "D"). This is done for each rotational position of the collar. Catalogue Number of Operator with Cam Code Suffix from tables below and on following pages, Example: 10250T2411. Catalogue Number(s) for Contact Blocks and Legend Plates if required. To select the cam and contact blocks needed for 2-position and 3-position switches, use the tables on following pages. Operator and Cam 10250T24111 Table 2-274. Operator and Cam Colour and Type of Button Vertical Mounting Horizontal Mounting Black Flush Red Flush Green Flush Black Long Red Long Green Long 10250T241_ 10250T242_ 10250T243_ 10250T261_ 10250T262_ 10250T263_ 10250T251_ + 1 to 18 10250T252_ 10250T253_ 10250T271_ 10250T272_ 10250T273_ Catalogue and Code No. Cam Code No. Price Select from Tables Overall Dimensions in Inches (mm) 1.13 (28.7) 1.38 (35.1) 0.38 (9.7) Long Button Only 1.53 (38.9) Not to be used for Emergency Stop application. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Two-Position Roto-Push Operator -- Rotates to a Latch-Out Mode Special Rotor Latch Special Roto Latch -- Red Long Button Catalogue Number 10250T3213 This differs from the other Roto-Push operators in that as the collar is rotated to the right it depresses the button and releases the button when rotated left. But the button in the released position can be momentarily pushed independent of the collar or its position. As the button is depressed by rotating the collar, the button also rotates and indicates its mode by a white line on the button face. This button can be used as an emergency stop or latched stop. Table 2-275. Special Rotor Latch -- UL (NEMA) 3, 3R, 4, 4X, 12, 13 Colour and Type of Button Catalogue Number Vertical Mounting Red Long Black Long 10250T3213 10250T3214 Price Overall Dimensions in Inches (mm) 1.13 (28.7) 1.38 (35.1) 1.53 (38.9) 0.38 (9.7) Long Button Only Contact Blocks . . . . . . . . . . Page 2-157 Enclosures . . . . . . . . . . . . . Pages 2-160 - 2-161 Legend Plates. . . . . . . . . . . Pages 2-158 - 2-159 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-153 10250T Series, Roto-Push Components Roto-Push Operators (Continued) Table 2-276. Cam and Contact Block Selection for Two-Position Roto-Push Combination Number Collar Position Cam Code 1 Cam Code 2 Cam Code 3 Cam Code 4 -- -- Cam Code 5 Cam Code 6 Circuit Sequence N D N D 1 O O O X 2 O O X O 3 O O X X 4 O X O O A NO -- O X O X 6 O X X O 7 O X X X 8 X O O O 9 X O O X 10 X O X O 11 X O X X 12 X X O O 13 X X O X 14 X X X O NO A B -- NO NO -- -- NC B NC B NC -- -- A NC B NO B NC A NC B NO B NO B NO -- -- -- A or B NO -- -- NO -- A NC NO -- B -- -- -- -- B NO B NC B NO B NC -- -- -- B NC A A B NO -- NC -- -- -- -- A A NO A or B NC -- -- -- A NO -- NC -- NO A -- -- A A -- -- -- A -- -- B -- NO -- -- 5 A -- A B -- -- -- -- -- -- -- A B NO NC NC NC NO NC B NC A A B NO NC -- A NC -- NC N = Button in free or normal position. D = Button depressed. A B NO NC Series Connection A B NO NC Parallel Connection Locating Nib A B Figure 2-61. Series and Parallel Connections Figure 2-62. Circuit Location The connections are not made at the factory. They are illustrated in the selection table as requirements, but must be made on the job. Letters "A" and "B" represent the locations which the two circuits of a contact block will occupy in relation to the locating nib of the operator. Figure 2-61 illustrates this pictorially. Contact Blocks . . . . . . . . . . . . . . . . . . . Page 2-157 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-154 July 2001 10250T Series, Roto-Push Components Roto-Push Operators (Continued) Table 2-276. Cam and Contact Block Selection for Two-Position Roto-Push (Continued) Combination Number Collar Position Cam Code 10 Cam Code 11 Cam Code 12 Cam Code 13 Cam Code 14 -- -- -- Circuit Sequence N D N D 15 O O O X 16 O O X O 17 O O X X 18 O X O O 19 O X O X 20 O X X O 21 O X X X 22 X O O O -- A B -- 2 NO NO A NC B NO B NO B NO A NO A B NO NC A NO A or B NC A NC -- -- -- -- -- B -- A B NC NO A NC B -- NC A B -- NO NC B NC NO NO A B A NC B -- NC 23 X O O X 24 X O X O 25 X O X X A NC A B NO NO 26 X X O O B NC B NC 27 X X O X A B NO NC 28 X X X O A B NC NC -- -- A B -- -- -- -- -- -- -- A NC -- -- -- A B NC NO NO NC -- -- B -- -- NO NO NO NO A B NC -- B -- -- A -- NC -- A or B NO A A NO -- -- NO -- N = Button in free or normal position. D = Button depressed. A B NO NC Series Connection A B NO NC Parallel Connection Locating Nib A B Figure 2-63. Series and Parallel Connections Figure 2-64. Circuit Location The connections are not made at the factory. They are illustrated in the selection table as requirements, but must be made on the job. Letters "A" and "B" represent the locations which the two circuits of a contact block will occupy in relation to the locating nib of the operator. Figure 2-63 illustrates this pictorially. Contact Blocks . . . . . . . . . . . . . . . . . . . . Page 2-157 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-155 10250T Series, Roto-Push Components Roto-Push Operators (Continued) Table 2-277. Cam and Contact Block Selection for Three-Position Roto-Push Combination Number Collar Position Cam Code 7 Cam Code 8 Cam Code 9 Cam Code 15 Cam Code 16 Cam Code 17 Cam Code 18 -- A NC B NO Circuit Sequence 1 N D N D N D O O O O O X 2 O O O O X X 3 O O O X O O 4 O O O X O X A B -- A NO NO B -- -- -- -- -- -- -- O O O X X X 6 O O X X O O NO NO -- B NO A B NO NC B NO -- -- A NO -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- A NO B -- 7 O O X X O X 8 O O X X X O 9 O O X X X X 10 O X O O O O A B 11 O X O O O X 12 O X O O X X 13 O X O X O O 14 O X O X O X 15 O X X X O O 16 O X X X O X 17 O X X X X X A -- A B NO NO -- B A B A NC -- B NO B NO A NO A NC B -- NO NO NC -- A -- A B NO NO A NO B -- -- -- -- -- -- -- -- -- -- -- A -- A B NO NO A B -- NO NO -- -- NO NO NO -- B B 5 NC -- NO NO NO -- A B NO NO A B -- NO NC -- -- A NO A B NO NO -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- NO NO NO Limited to 4 contact blocks. See Note on Page 2-157. N = Button in free or normal position. D = Button depressed. A B NO NC Series Connection A B NO NC Parallel Connection Figure 2-65. Series and Parallel Connections The connections are not made at the factory. They are illustrated in the selection table as requirements, but must be made on the job. Locating Nib A Letters "A" and "B" represent the locations which the two circuits of a contact block will occupy in relation to the locating nib of the operator. Figure 2-65 illustrates this pictorially. B Figure 2-66. Circuit Location Contact Blocks . . . . . . . . . . . . . . . . . . . Page 2-157. CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-156 July 2001 10250T Series, Roto-Push Components Roto-Push Operators (Continued) Table 2-277. Cam and Contact Block Selection for Three-Position Roto-Push (Continued) Combination Number Collar Position Cam Code 7 Cam Code 8 Cam Code 9 Cam Code 15 Cam Code 16 Cam Code 17 Cam Code 18 -- -- -- -- -- Circuit Sequence N D N D N D 18 X O O O O O 19 X O O O X X 20 X O O O X O 21 X O X X O O 22 X O X X X X 23 X O X X X O 24 X O X O X O A NC -- B NC -- -- -- 2 A B A X O -- -- -- -- -- A NC -- -- -- -- -- B NC -- -- NC A NO B NC -- NC -- NO -- -- -- -- -- -- X O NC -- -- 25 A -- -- -- X X O O O O B 27 X X O O O X A B 28 X X O O X O 29 X X O O X X 30 X X X X O O 31 X X X X X O 32 X X X O X O 33 X X X O X X NC -- NC A NC NC B NC A NC -- -- -- -- -- -- -- -- -- NC -- NO -- -- -- -- -- -- -- B NO -- NC NC -- -- NC A -- -- B -- -- -- A -- NC A NO B -- -- -- A B -- NC -- NC NO -- -- -- -- NC A B -- NC NC A NC B NC -- NC -- B A B NC B -- A NO -- NC NC B B NC -- B A A -- X X 26 A A -- B NC A B NO -- NC NC NC A B NO NC B NC -- -- A B NC NC Limited to 4 contact blocks. N = Button in free or normal position. D = Button depressed. A B NO NC Series Connection A B NO NC Parallel Connection Figure 2-67. Series and Parallel Connection The connections are not made at the factory. They are illustrated in the selection table as requirements, but must be made on the job. Locating Nib A Letters "A" and "B" represent the locations which the two circuits of a contact block will occupy in relation to the locating nib of the operator. Figure 2-67 illustrates this pictorially. B Figure 2-68. Circuit Location Contact Blocks . . . . . . . . . . . . . . . . . . . . Page 2-157 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-157 10250T Series, Components -- Contact Blocks 10250T1C Amber 10250T1 Contact Blocks 10250T1P Fingerproof Logic Level Standard Contact Blocks Moulded, thermoplastic construction. Enclosed silver contacts with reliability "nibs" that improve the reliability of switching performance under dry circuit, corrosive atmosphere and fine dust conditions. Note: Joystick, 4-position selector switch and cam code 9 and 15 of Roto-Push operators are limited to a maximum of four contact blocks. Push-Pull units limited to a maximum of two contact blocks. Feature palladium contacts. Palladium, which is more inert than gold, is well suited for voltages and currents approaching zero. When mounted in an enclosure rated for highly corrosive environments, logic level contact blocks can be used where exposure to chemicals may cause failure of other types of materials. Added Spring Pressure (ASP) Previously Cutler-Hammer offered Contact Blocks with Additional Spring Pressure (ASP) on the NC contact to 10250T1PC Amber and Fingerproof prevent opening of the contact in severe shock and vibration applications. Cutler-Hammer's new style contact block is 80% more resistant to shock than the previous style ASP blocks, eliminating the need for the special ASP style blocks. 10250T50, 10250T49, 10250T48 are replaced by 10250T51, 10250T3 and 10250T1 respectively. Maximum Ampere Ratings All contact blocks, including logic level, are UL A600/P600 rated per Table 2-204 on Page 2-122. Table 2-278. Contact Blocks Symbol Circuit Description/Notes Standard Logic Level Pressure Terminals Spade Terminals Catalogue Price Number Catalogue Number Pressure Terminals Price Catalogue Number Spade Terminals Price Catalogue Number Blank No Plunger 1NC T51 and T51E stack up to 6 blocks (6 circuits) unless otherwise noted. 10250T51 10250T59 10250T51E 10250T59E Blank No Plunger 1NO T53 and T53E stack up to 6 blocks (6 circuits) unless otherwise noted. 10250T53 10250T60 10250T53E 10250T60E NO-NC T1 and T1E stack up to 6 blocks (12 circuits) 10250T1 unless otherwise noted. 10250T40 10250T1E 10250T40E 2NC T3 and T3E stack up to 6 blocks (12 circuits) 10250T3 unless otherwise noted. 10250T42 10250T3E 10250T42E 2NO T2 and T2E stack up to 6 blocks (12 circuits) 10250T2 unless otherwise noted. 10250T41 10250T2E 10250T41E Price Special Function Blocks Blank No Plunger LONC Late opening NC. Stack up to 6 blocks (6 circuits) unless otherwise noted. 10250T71 -- -- 10250T71E -- -- ECNO-NC Early closing NO and standard NC. Stack up 10250T47 to 6 blocks unless otherwise noted. -- -- 10250T47E -- -- ECNO-NO One early closing NO and one standard NO. 10250T57 Not for use on 4-position selector switch, push-pulls or 2-position joystick or padlock attachments. Stack up to 4 blocks unless otherwise noted. -- -- 10250T57E -- -- 2LONC Two late opening NC contacts. T45 stack10250T45 able up to 6 blocks unless otherwise noted. -- -- 10250T45E -- -- LONC-ECNO Overlapping contacts. Not suitable for use on 4-position selector switch, push-pulls or 2-position joystick or with padlock attachments. Stack up to 4 blocks unless otherwise noted. 10250T55 -- -- 10250T55E -- -- 2NO-2NC 10250T44 -- -- Four circuits in single block depth. Rated 300V max. Not for use on selector switch or Roto-Push. Stack up to 4 blocks unless otherwise noted. Limit one per operator. Minimum spacing 2.5" (63.5 mm) centres. Cannot be assembled in standard T-Line enclosures. Fingerproof shroud not available. Add C for Amber. CAT.201.01.T.K To order with fingerproof shrouds add letter P to Catalogue Number. Example: 10250T51P. For Amber block without shroud, add letter C to Catalogue Number. Example: 10250T51C. With shrouds Catalogue Number is 10250T51CP. No amber colour -- no finger protection available. For pricing information, refer to the CutlerHammer Control & Automation Products Price & Availabiity Digest. Not to be stocked with other blocks when mounted on a 3 position push-pull operator. For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-158 July 2001 10250T Series, Legend Plates Options Legend Plates Legend Plates with Standard Markings The legend plates listed below are sized for all standard commercial enclosures and C-H cast enclosures. For vertical spacing less than 1.75", replace the S in the Catalogue Number with MS, or the M with P (except Push-Pull). No change in price. The smaller size legend plates, "MS" or "P" size, have limited space for legend. Table 2-279. For Pushbutton Operators and Indicating Lights -- Standard Price Each -- Colour of Catalogue Number Field Square 1/2 Round Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Table 2-285 on Page 2-159 2 Letters on Legend Plates Below are 3/16" High CLAMP CLOSE DOWN EMERG. STOP FAST Black Black Black Red Black 10250TS90 10250TS73 10250TS74 10250TS13 10250TS75 10250TM90 10250TM11 10250TM12 10250TM13 10250TM14 FASTER FEEDER ON FEEDER OFF FORWARD HIGH Black Black Black Black Black 10250TS87 10250TS94 10250TS95 10250TS15 10250TS16 10250TM87 10250TM94 10250TM95 10250TM15 10250TM16 IN INCH JOG JOG FOR. JOG REV. Black Black Black Black Black 10250TS17 10250TS18 10250TS19 10250TS20 10250TS21 10250TM17 10250TM18 10250TM19 10250TM20 10250TM21 LOW LOWER LUBE-FAIL MOTOR RUN MOTOR STOP Black Black Black Black Black 10250TS22 10250TS23 10250TS92 10250TS81 10250TS82 10250TM22 10250TM23 10250TM92 10250TM81 10250TM82 OFF ON OPEN OUT POWER ON Red Black Black Black Black 10250TS24 10250TS25 10250TS26 10250TS27 10250TS80 10250TM24 10250TM25 10250TM26 10250TM27 10250TM80 RAISE READY RESET REVERSE RUN Black Black Black Black Black 10250TS28 10250TS86 10250TS29 10250TS30 10250TS31 10250TM28 10250TM86 10250TM29 10250TM30 10250TM31 SAFE SLOW SLOWER START STOP Black Black Black Black Red 10250TS85 10250TS32 10250TS88 10250TS33 10250TS34 10250TM85 10250TM32 10250TM88 10250TM33 10250TM34 TEST TRANSFER TRIP UNCLAMP UP 1/2 Round Legend Plate Catalogue Number 10250TM38 Black Black Black Black Black 10250TS83 10250TS93 10250TS84 10250TS91 10250TS35 10250TM83 10250TM93 10250TM84 10250TM91 10250TM35 For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. 70 mm Round -- Plastic Catalogue Number 10250TRP79 Table 2-281. For Selector Switch and Roto-Push Operators -- Standard Size Price Each -- Legend Legend Square Legend Plate Catalogue Number 10250TS41 Colour of Field Catalogue Number Square 1/2 Round Blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Table 2-285 on Page 2-159 2-Position -- 5/32" High Lettering FOR. REV. HAND AUTO HIGH LOW JOG RUN MAN. AUTO Black Black Black Black Black 10250TS38 10250TS39 10250TS40 10250TS41 10250TS67 10250TM38 10250TM39 10250TM40 10250TM41 10250TM67 OFF ON OPEN CLOSE RUN JOG SAFE RUN START JOG Black Black Black Black Black 10250TS42 10250TS43 10250TS44 10250TS45 10250TS46 10250TM42 10250TM43 10250TM44 10250TM45 10250TM46 START STOP UP DOWN Black Black 10250TS47 10250TS48 10250TM47 10250TM48 3-Position -- 1/8" High Lettering AUTO OFF HAND FOR. OFF REV. FOR. SAFE REV. HAND OFF AUTO MAN. OFF AUTO Black Black Black Black Black 10250TS49 10250TS50 10250TS69 10250TS51 10250TS68 10250TM49 10250TM50 10250TM69 10250TM51 10250TM68 OPEN OFF CLOSE RUN SAFE JOG UP OFF DOWN ON STOP SAFE Black Black Black Red 10250TS53 10250TS70 10250TS54 10250TS71 10250TM53 10250TM70 10250TM54 10250TM71 Square legend plates have a satin aluminum field. Colour is on lower portion. Table 2-282. 45 mm and 70 mm Plastic -- Round Colour Field Catalogue Number Yellow or Red 10250TRP78 Blank Yellow or Red 10250TRP76 Red EMERG. STOP Yellow 10250TRP79 Lettering Price 45 mm Blank 70 mm If legend plate is to be engraved, specify field colour required. Table 2-283. For Push-Pull Units Price Each -- . ................................................ Legend Colour of Field Catalogue Number Square 1/2 Round Standard Size -- Letters on Legend Plates Below are 3/32" High Table 2-280. Blank Plastic Legend Plates -- Square PULL START/PUSH STOP PUSH ON/PULL OFF PULL OPEN/PUSH CLOSE PULL UP/PUSH DOWN Price Each -- Colour Catalogue Number Lettering Field Standard Jumbo Extra Large Black White or Silver Red or Black 10250TSP76 10250TLP76 10250TEP76 10250TSP77 10250TLP77 10250TEP77 White If legend plate is to be engraved, specify field colour required. Cannot be used on cast enclosures except for top row. Suitable for most sheet metal enclosures. Green/Red Black Black Black 10250TPP2 10250TPP5 10250TPP8 10250TPP11 10250TR2 10250TR5 10250TR8 10250TR11 Jumbo Size -- Letters on Legend Plates Below are 1/8" High PULL START/PUSH STOP PULL ON/PUSH OFF PULL OPEN/PUSH CLOSE PULL UP/PUSH DOWN Green/Red Black Black Black 10250TPP3 10250TPP6 10250TPP9 10250TPP12 10250TR3 10250TR6 10250TR9 10250TR12 All Push-Pull Legend Plates include the symbols in the centre of the plate. For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-159 10250T Series, Legend Plates Legend Plates with Non-standard Markings Blackening Kit When Ordering Specify Solution blackens aluminum exposed by engraving process. Must be applied immediately after engraving. 0.3 oz. bottle -- sufficient for approximately 1100 legend plates. Catalogue Number of Blank Plate Phase plus Suffix "STAMP." Insert the following into Order Notes: Legend, Letter Size and Locations (letters A - W) -- combine letters for definitive locations as shown. Small Size 10250TMS or TP Series A Jumbo Size 10250TL or TJ Series A B C D K Table 2-284. Blackening Kit Price Catalogue Number 10250TBK Ordering Example: Standard Size 10250TS or TM Series Catalogue No.:10250TS36STAMP Letter Size: 3/32 inch (2.4 mm) Pos. A -- POWER HOUSE Pos. B -- START PUMP 1 A Extra Large Size Cat. No. 10250TNP99 B G F AE AF A B Legend Characters Available AB C ABCDEFGHIJKLMNOPQRSTUVWX YZ/-.,1234567890 Legend characters on black and red plates are white -- on satin aluminum plates, characters are black. D B4 K C4 A4 A H D4 G L I Figure 2-70. Legend Positions Figure 2-69. Legend Positions Table 2-285. Blank and Custom Engraved Legend Plates Style Colour Price Catalogue Number Small Standard Jumbo Extra Large 4-Position Selector Switch Push-Pull with Symbols Blank Custom Standard Standard Jumbo Square Black Red Green/Red Satin Alum. 10250TMS36 10250TMS37 -- -- 10250TS36 10250TS37 -- -- 10250TL36 10250TL37 -- -- -- -- -- 10250TNP99 10250TS76 -- -- -- 10250TS72 -- -- -- 10250TPP17 -- 10250TPP20 -- 10250TPP18 -- 10250TPP21 -- 1/2 Round Black Red Green/Red Satin Alum. 10250TP36 10250TP37 -- -- 10250TM36 10250TM37 -- 10250TM89 10250TJ36 10250TJ37 -- 10250TJ89 -- -- -- -- -- -- -- -- 10250TM72 -- -- -- 10250TR17 -- 10250TR20 -- 10250TR18 -- 10250TR21 -- Custom Engraved All Push-Pull Legend Plates include the symbols in the centre of the plate. When used to meet Ford Motor Co. specifications, specify engraved legend. Cannot be used on standard cast or sheet metal enclosures. Cannot be used on cast enclosures except for top row. Suitable for most sheet metal enclosures. Square legend plates have a satin aluminum field. Colour is on lower portion. Slightly larger than standard size for legends requiring more space -- fits cast enclosures. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-286. Maximum Characters per Legend Plate and Approximate Dimensions Top (Aluminum and Plastic) Approximate Dimensions in Inches (mm) Width Style Height Character Size 3/32" High 1/8" High 3/16" High Number of Lines Number of Characters Number of Lines Number of Characters Number of Lines Number of Characters Small 1.59 (40.4) 1.59 (40.4) Square 1/2 Round 1 1 17 15 -- 1 -- 12 -- 1 -- 9 Standard and Custom 1.75 (44.5) 1.75 (44.5) Square 1/2 Round 2 2 18 15 2 2 13 12 1 1 9 9 Jumbo 2.19 (55.6) 2.19 (55.6) Square 1/2 Round 5 5 23 19 3 4 18 15 2 2 12 11 Extra Large 2.44 (62) 2.44 (62) Square 6 25 3 18 3 12 Recommended only when mounting on minimum centres [less than 1-3/4 inch (44.5 mm) vertical centres]. Cannot be used on cast enclosures except for top row. Suitable for most sheet metal enclosures. When used to meet Ford Motor Co. specifications, specify engraved legend. Cannot be used on standard cast or sheet metal enclosures. Legend Plates for Joystick Operator. . . . . . . . . . . . . . . Page 2-151 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-160 July 2001 10250T Series, Enclosures Die Cast Enclosure -- 1 Hole 2 Contact Block Depth Catalogue Number Polyester Enclosure -- 2 Holes 2 Contact Block Depth Catalogue Number E34N52 Stainless Steel Enclosure -- 3 Holes 2 Contact Block Depth Catalogue Number 10250TN33 Enclosures Die Cast, Polyester and Stainless Steel Enclosures Table 2-287. Enclosures (Case and Cover) -- Surface Mounting 2 Cast Enclosure -- In-Line NEMA 4, 4X, 12, 13 Number of Elements 1 Contact Block Depth Catalogue Number 1 2 3 4 2 Contact Block Depth Price 10250TN1 10250TN2 10250TN3 10250TN4 Stainless Steel -- In-Line NEMA 4, 4X, 12 Polyester -- In-Line NEMA 3, 4X, 12 2 Contact Block Depth Price Catalogue Number 10250TN11 10250TN12 10250TN13 10250TN14 Catalogue Number 2 Contact Block Depth Price Price Catalogue Number E34N51 E34N52 E34N53 E34N54 10250TN33 10250TN34 10250TN35 10250TN36 For spacing increments, see Page 2-161. All cast enclosures can be converted to base mounting of contact blocks, with spacers 10250TA22 or 10250TA23. See listing on Page 2-163. When used with E30 pushbuttons, only the one element enclosure can be used. 14 gauge, type 304. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Table 2-288. Approximate Dimensions Number Element Surface Mounting of Arrangement Dimensions in Inches (mm) Elements Wide High Deep A B C Conduit Entrance 4 Mtg. Holes -- 10-32 Screw Size for 1 - 4 Element Die Cast/ Stainless Steel Enclosure 7/32 Screw Size for Polyester Mounting D E 3.0 (76.3) 3.0 (76.3) 3.0 (76.3) 3.0 (76.3) 2.69 (68.3) 2.69 (68.3) 2.69 (68.3) 2.69 (68.3) 3.25 (82.6) 5.13 (130.3) 7.0 (177.8) 8.88 (225.6) 3/4 3/4 1 1 Cast 1 2 3 4 E In-Line In-Line In-Line In-Line 3.88 (98.6) 3.88 (98.6) 3.88 (98.6) 3.88 (98.6) In-Line In-Line In-Line In-Line 3.81 (96.8) 6.63 (168.4) 3.81 (96.8) 6.63 (168.4) 3.81 (96.8) 8.88 (225.6) 3.81 (96.8) 11.13 (282.7) 3.38 (85.9) 3.38 (85.9) 3.38 (85.9) 3.38 (85.9) 2.94 (74.7) 2.94 (74.7) 2.94 (74.7) 2.94 (74.7) 4.88 (124.0) 4.88 (124.0) 7.13 (181.1) 9.38 (238.3) 3.50 (88.9) 4.50 (114.3) 3.50 (88.9) 6.75 (171.5) 3.50 (88.9) 9.0 (228.6) 3.50 (88.9) 11.25 (285.8) 2.88 (73.2) 2.88 (73.2) 2.88 (73.2) 2.88 (73.2) 2.38 (60.5) 2.38 (60.5) 2.38 (60.5) 2.38 (60.5) 4.0 (101.6) 6.25 (158.8) 8.50 (215.9) 10.75 (273.1) 4.0 (101.6) 5.88 (149.4) 7.75 (196.9) 9.63 (244.6) B Polyester 1 2 3 4 D A C Surface Figure 2-71. Dimensions Stainless Steel In-Line In-Line In-Line In-Line Top - For Vertical Mounting 1 No conduit entrance holes provided. Drill as required. Depth given is for two contact block deep stations. One contact block deep stations subtract 3/4 inch (19.1 mm). Note: 2-position joystick must be used with two contact block deep enclosures (maximum number of contact blocks = 1). 4-position joysticks can not be used within these enclosures. One Contact Block Depth Enclosure 1 1 1 2 2 2 3 3 4 Top - For Horizontal Mounting 1 2 3 4 Figure 2-72. Enclosure Layouts Two Contact Block Depth Enclosure For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-161 10250T Series, Enclosures Die Cast and Stainless Steel -- Flush Mount, Covers Only Table 2-289. Covers Only -- Flush Mounting Number of Elements 1 2 3 4 In-Line Stainless Steel Flush Plates Flush Cast Covers In-Line Deep Cover In-Line Flat Cover With Pullbox Catalogue Number Catalogue Number Catalogue Number Price 10250TF11 10250TF12 10250TF13 10250TF14 Price 10250TF1 10250TF2 10250TF3 10250TF4 Without Pullbox Price Catalogue Number 10250TS10 10250TS11 10250TS12 10250TS14 Price 10250TS1 10250TS2 10250TS3 10250TS4 Flat Cover Deep Cover Not oiltight. NEMA 1 applications only. For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availabiity Digest. 4 Mtg. Holes - 10-32 Screw Size for 1-11 Element Encl, 1/4-20 Screw Size for 12 Element and Larger Table 2-290. Approximate Dimensions Number of Elements Flush Mounting Dimensions in Inches (mm) Wide A High B Deep C Mounting D E 4.0 (101.6) 5.88 (149.4) 7.75 (196.9) 9.63 (244.6) 0.25 (6.4) 0.25 (6.4) 0.25 (6.4) 0.25 (6.4) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.63 (92.2) 5.50 (139.7) 6.0 (152.4) 9.25 (235) 5.0 (127) 6.88 (174.8) 8.63 (219.2) 10.50 (266.7) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 2.50 (63.5) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 1.88 (47.8) 3.63 (92.2) 5.50 (139.7) 7.25 (184.2) E Cast 1 2 3 4 3.88 (98.6) 3.88 (98.6) 3.88 (98.6) 3.88 (98.6) B Stainless Steel 1 2 3 4 5.0 (127) 5.0 (127) 5.0 (127) 5.0 (127) D C A Surface or Pendant Figure 2-74. Dimensions Depth given is for flat cover. Deep cover 3/4 inch (19.1 mm) deeper. Depth given includes pull box. Top - For Vertical Mounting G H F Type 1 Dimensions in Inches (mm) F G H Cast 2.44 (62) 2.5 (63.5) 1.88 (47.8) Polyester 1.88 (47.8) Min. 2.13 (54.1) 2.25 (57.2) Stainless Steel 1.69 (42.9) Min. 1.73 (43.9) 2.25 (57.2) 1 1 2 2 2 3 3 4 Figure 2-75. Enclosure Arrangement Diagram Figure 2-73. Spacing Increments for Enclosures CAT.201.01.T.K 1 Top - For Horizontal Mounting Table 2-291. Spacing Increments -- Approximate For more information contact Cutler-Hammer at: www.cutler-hammer.ca 2 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-162 July 2001 10250T Series, Accessories Accessories Padlocks not included with padlocking attachments. For operators with built-in padlock attachment, see Page 2-138. Table 2-292. Accessories Description 2 Catalogue Number Price Description Catalogue Number Padlocking Attachment for Flush 10250TA2 Pushbutton Operators Permits locking NC contacts in open position with 1/4" padlock. Will not lock NO contact. Extended Retaining Nut Replaces standard nut and provides guard for flush head pushbutton operators. 10250TA12 Padlocking Attachment for Use 10250TA26 with Extended Pushbutton Permits locking NC contacts in open position with 1/4" padlock. Guard for Illuminated Pushbutton 10250TA15 Padlocking Cover Guard Cover locked over flush button makes it unaccessible or on extended button locks NC contacts open. Takes 1/4" shank size padlock. Shroud For jumbo mushroom head operator. 10250TA56 Half Shroud For jumbo mushroom head operator. 10250ED1241 Wobble Stick Complete with retaining nut -- fits standard button. 10250TA5 Lever Operator For use with two vertically mounted flush pushbuttons. 10250TA14 10250TA36 Padlock Hasp or Flip-Up Guard 10250TA38 When used with a 1/4" padlock, makes flush and long button and knob selector switch unaccessible, but not locked down. Without the padlock, it is a flip-up guard. Padlock hasp can be removed before assembly. Padlocking Attachment for Use with Flexible Weather Resistant Boot Used on long button operators. Stainless steel. Use only for locking NC contacts open. 10250TA63 Maintained Contact Attachment Release Button Assembly Mechanically interlocks with another pushbutton and contact block (not included). Provides mode indication. Minimum hole centres 1.62 inch (41.1 mm), maximum 2.313 inch (58.8 mm). Black Red Green Yellow Same with Long Button -- Black Padlock Attachment 10250TA64 For use with Illuminated Pushbuttons and maintained Push-Pull operators having standard button or lens only. Use 1/4" padlock. Flexible Weather Resistant Boot For use with button operators (extended buttons preferred). Temperature to -25F (-32C) Black Red Green (See Page 2-163 for 10250TA96 Tightening Tool.) Transparent Boot For regular illuminated pushbutton operators and PresTest -- Temperature to -38F (-39C) Boot for Flush Pushbutton Clear Black Red Green 10250TA3 10250TA4 10250TA10 10250TA17 10250TA18 10250TA19 10250TA20 10250TA39 10250TA1 Maintained Contact Attachment Mechanically interlocks two buttons and provides position indication for one. Use with two pushbutton operators and one or more contact blocks. 10250TA25 10250TA46 10250TA47 10250TA48 10250TA49 Roto-Push Lever Operator -- Used to provide lever operation for Roto-Push operators. 10250TA13 Shroud for Mushroom Head Operator Prevents accidental operation. (Not for push-pull operators.) 10250TA6 Plug -- For unused holes -- Steel, painted gray (Stainless steel, use E30KT5, see Page 2-117) 10250TA7 Padlocking Attachment for Non-illuminated Knob Selector Switches Provision for up to 5, 1/4" padlocks. 10250TA11 Spacer Ring -- Used when legend plate is not required. 10250TA8 For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Should not be used on flush button for STOP function. Not suitable for single contact block depth cast enclosure. Cover is too thick. Price Cannot be padlocked in OFF position. Limited to two contact blocks -- four circuits. Not suitable for single contact block depth cast enclosure. Cover is too thick. Dimensions . . . . . . . . . . . . . Pages 2-165 - 2-167 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-163 10250T Series, Accessories Table 2-292. Accessories (Continued) Description Catalogue Number Price Description Base Mounting Spacers -- Equivalent to contact 1 Block 10250TA22 block in depth -- Deep Complete with screws, 2 Block 10250TA23 washers, etc. Deep Grounding Kits -- Kits consist of a ring connector and a #6 screw for mounting connector to rear of contact block mounting screw. All components except Standard Indicating Lights and PresTest Indicating Lights Standard Indicating Lights PresTest Indicating Lights Contact Block Terminal Jumpers -- Available in multiples of 100 only. Term. to Term. -- within Block (short) 100 per pkg. 1000 per pkg. Term. to Term. -- Block to Block (long) 100 per pkg. 1000 per pkg. Fingerproof Shroud -- 10 per Package Fits new style contact blocks and light units. Master Test (Dual Input) Module -- Internal Form C relay suitable for either AC or DC applications. Total electrical isolation between monitored and test circuit. Fits all illuminated 10250T, E22, E30 and E34 devices. 24V AC 120V AC 24V DC 48V DC Flasher Module -- Changes any AC illuminated device to a controlled flashing light. Fits 10250T, E30 and E34 devices. 24V 120V Flashing Incandescent Lamp -- For use with 120V transformer type or 6V full voltage type Indicating Lights including PresTest and most E29 devices. Lamp Removal Tools -- For transformer type illuminated pushbuttons, push-pull and selector switches. Fits #12 lamp. For full voltage and resistor type illuminated pushbuttons, pushpull and selector switches and E30. Standard indicating lights. Fits #44, #755, #6S6 and #10S6. Catalogue Number Terminal Block -- Two terminals, each will accommodate two wire terminations. Price 10250TA62 Stacking Screw -- 10250TA79 Replaces transformer mounting screws on indicating light so terminal block 10250TA62 can be mounted to light to support and connect a series resistor. This screw also fits all contact blocks. Order in multiples of 10. 10250TKG1 Wrenches 10250TKG2 10250TKG3 10250TA70 10250TA70-2 10250TA71 10250TA71-2 10250TA101 Octagonal 10250T (notched to fit over selector switch lever), E29 and E30 10250TA95 2 E22, E30, E34 and Octagonal E22CW 10250T (will not fit over selector switch levers) Tool for Tightening Boots -- 10250TA96 Used to install boot Catalogue Numbers, 10250TA3, A4, A10 and A25. 10250T, E34 Allen Wrench -- 10250TA102 Used for removal of jumbo mushroom head. Mounting Hardware 10250TK3 Thrust Washers -- To meet Ford Motor Co. mounting specifications. 10250TMT2 10250TMT1 10250TMT7 10250TMT8 Contact Block Tape Seal -- Seals plunger openings on last contact block. Order in multiples of 10 pieces. Special Retaining Nut -- to accommodate thick panel: Indicating lights PresTest, pushbuttons and selector switches 10250TK5 10250TA30 10250TA31 Pendant Station Accessories 10250TFL2 10250TFL1 10250ED986-4 10250TA74 E30KV1 E29KLT For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. Component only. Not to be used for custom built (factory assembled) stations. Includes replacement mounting screws for light unit. Head of replacement screw is drilled and tapped to accept ring connector. Multiple Button Guard -- Protects in-line mounted pushbuttons on 1-7/8" vertical centres against accidental operation. 2 element 3 element 4 element 7 element Cable Clamp Connector -- For pendant applications -- Adapts standard enclosure for pendant mounting -- For 1 and 2 element in-line enclosure and 5/16 - 7/16 inch (7.9 - 11.1 mm) diameter cable For 3 - 7 element in-line enclosure and 3/4 - 7/8 inch (19.1 - 22.2 mm) diameter cable Chain Hook Plate -- Connects support chain to cast enclosure. 1, 2, 3 and 4 element 6 and 7 element 10250TA32 10250TA33 10250TA34 10250TA37 10250TA40 10250TA27 10250TA28 Dimensions . . . . . . . . . . . . . . Pages 2-165 - 2-167 CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-164 July 2001 10250T Series, Mounting Options Mounting Terminals on Top Panel Thickness Minimum: 0.06 inch (1.6 mm) Maximum: 0.25 inch (8 mm) including legend plate Maximum can be increased to 0.375 inch (15.9 mm) using optional retaining nut Indicating light: 10250TA30 Pushbutton/selector switch: 10250TA31 Table 2-293. Mounting Matrix 2 Legend Plate Dimensions in Inches (mm) A B C D Small 1.63 (41.3) 1.75 (44.5) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 1.63 (41.3) 1.75 (44.5) 2.25 (57.2) Medium Large 0.14 (3.6) Dia. B Min. 0.6 (15.2) D Min. A Min. C Min. 1.22 (31) Terminals at Side Horizontal Mounting Vertical Mounting Figure 2-76. Mounting Options in Inches (mm) Horizontal mounting means terminals are located top and bottom of contact block. Vertical mounting means terminals are left and right of contact block. This allows close spacing of adjacent operators with easy access to terminals. 0.6 (15.2) 0.14 (3.6) Dia. 1.22 (31) Note: Locating nib hole or notch is 0.14 inch (3.6 mm) #29 drill. Figure 2-77. Drilling Dimensions in Inches (mm) For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-165 10250T Series, Dimensions Dimensions Inches (mm) 0.06 (1.5) to 0.25 (6.4) Panel Thickness 1.81 (46) 1.09 (27.7) 1.06 (26.9) 0.38 (9.7) Long Button Only 1.38 (35.1) 1.78 (45.2) Flush and Long Pushbutton Half Shroud Is Same as Long Pushbutton with Lower Half of Guard Ring Cut Back 2.5 1.5 (63.5) (38.1) 1.13 0.88 (22.4) (28.7) for Each Additional Contact Block 1.09 (27.7) 1.13 (28.7) 1.13 (28.7) 1.63 (41.4) 1.75 (44.5) Mushroom and Jumbo Head Pushbutton Illuminated Pushbutton Pushbutton with Cylinder Lock 1.13 (28.7) 0.06 (1.5) to 0.25 (6.4) Panel Thickness 0.25 (6.4) 2.5 (63.5) 2.63 (66.8) 1.65 (41.9) 1.13 (28.7) 1.63 (41.4) 1.78 (45.2) 2.03 (51.6) 1.75 (44.5) 1.09 (27.7) 2.0 (50.8) 1.5 (38.1) Flush Pushbutton Operator with Padlock Attachment Mushroom Head Pushbutton Operator with Padlock Attachment 2.31 (58.7) 1.8 (45.7) 1.78 1.38 (45.2) (35.1) 1.78 (45.2) 1.1 (27.9) 1.38 (35.1) 2.19 (55.6) A Indicating Light - Transformer Type 1.94 (49.3) PresTest Indicating Light - Transformer Type 1.78 (45.2) 1.38 (35.1) 1.1 (27.9) 2.5 (63.5) Jumbo Mushroom Head Pushbutton Operator with Padlock Attachment Plastic 1.38 (35.1) Glass 1.59 (40.4) 1.78 (45.2) 2.38 (60.5) 1.75 (44.5) 1.56 (39.6) 1.88 (47.8) B Spade Terminal 1.63 (41.4) 1.38 (35.1) A Screw Terminal 1.38 (35.1) 1.78 (45.2) A 1.88 (47.8) Indicating Light - Resistor and Neon Type Dimension A Plastic 1.38 (35.1) Glass 1.56 (39.6) 1.56 (39.6) PresTest Indicating Light - Resistor Type Master Test Indicating Light Description Relay Type Solid-State Type Figure 2-78. Approximate Dimensions in CAT.201.01.T.K 2.0 (50.8) 1.78 (45.2) Push-Pull Switch Lens 1.38 (35.1) 1.38 (35.1) 1.91 (48.5) 2 0.88 0.88 (22.4) (22.4) 1.81 (46) 0.69 (17.5) 1.09 (27.7) For more information contact Cutler-Hammer at: www.cutler-hammer.ca Dim. in Inches (mm) B C 4.38 (111.2) 2.94 (74.7) 4.28 (108.7) 2.88 (73.2) 2-166 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 10250T Series, Dimensions Threaded Bushing A Large Dial Plate 1.88 (47.8) Std. Dial Plate Potentiometer 1.31 (33.3) 1.09 1.0 (27.7) (25.4) Dimensions in Inches (mm) A 0.94 (23.9) B B Shaft C 0.94 (23.9) 2 Watt Single 0.94 (23.9) 25 Watt -- 2.38 1.19 0.81 Up to 25M Ohms (60.5) (30.2) (20.6) 0.75 (19.1) Shaft Dimensions of Potentiometer That C-H Operator Will Accept 1.31 0.94 0.94 (33.3) (23.9) (23.9) 50M Ohms 2.56 (65) Potentiometer 1.69 1.25 (42.9) (31.8) Cat. No. Operator Dimensions in Inches (mm) 10250T330 0.38 (9.7) Dia. x 0.25 (6.4) Dia. x 0.38 (9.7) Long 0.63 (16) Long A B 10250TH3872 0.38 (9.7) Dia. x 0.25 (6.4) Dia. x 0.38 (9.7) Long 0.88 (22.4) Long Coin Slot Knob 2 1.13 (28.7) Operator Dim. A Knob 1.38 (35.1) Lever 1.50 (38.1) 1.38 (35.1) Lever A Coin Slot 1.38 (35.1) 1.5 (38.1) 1.09 (27.7) 0.88 (22.4) per Block 0.06 (1.5) to 0.26 (6.6) Panel Thickness 1.25 (31.8) 21 1.19 1.88 (47.8) 0.88 (22.4) (30.2) Per Unit 21 3.75 (95.3) 1.22 (31) 4-Position Joystick Operator 3.59 (91.2) Wobble Stick Catalog No. 10250TA5 1.47 (37.3) 1.59 (40.4) 1.59 (40.4) 1.88 (47.8) 3.75 (95.3) 1.33 (33.8) 1.88 (47.8) Flexible Boot for Protecting Flush or Long Pushbutton Catalog No. 10250TA3 Typical 0.94 (23.9) 0.38 (9.7) 1.06 (26.9) 2.06 (52.3) 1.63 (41.4) 0.25 (6.4) Padlock Attachment for Flush Pushbutton Catalog No. 10250TA2 0.84 (21.3) 1.5 (38.1) Padlock Attachment for Extended Pushbutton Catalog No. 10250TA26 1.63 (41.4) 0.44 (11.2) Transparent Flexible Boot for Illuminated Pushbutton Catalog No. 10250TA25 Lever Operator (For Use with Two Vertically Mounted Flush Pushbuttons) Catalog No. 10250TA14 0.84 (21.3) 2.44 (62) 1.38 (35.1) Cam 0.75 (19.1) 1.44 (36.6) 1.25 (31.8) 4.0 (101.6) 2-Position Joystick Operator 2.19 (55.6) 1.53 (38.9) Illuminated Selector Switch 2.2 (55.9) mom. 2.5 (63.5) main. 2.13 (54.1) 0.38 (9.7) Long Button Only Roto-Push 1.96 (49.8) 3.88 (98.6) 2.06 (52.3) 1.38 (35.1) 1.38 (35.1) Key Operated Selector Switch Contact 0.89 Block (22.6) 1.13 (28.7) 1.13 (28.7) Padlock Attachment for Knob Selector Switch Catalog No. 10250TA11 0.97 (24.6) Adjustable 1.62 (41.1) Min. 1.63 (41.4) Min. 2.5 (63.5) Max. 2.31 (58.7) Max. 0.88 (22.4) for Each 0.89 Additional 1.07 (22.6) Contact (27.2) Block Maintained Pushbutton Catalog No. 10250TA66 Typical 1.13 (28.7) 0.91 (23.1) Maintained Contact Attachment Catalog No. 10250TA17 Typical Figure 2-79. Approximate Dimensions in Inches (mm) For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-167 10250T Series, Dimensions 0.38 (9.7) 0.75 (19.1) 2.19 (55.6) 1.16 (29.5) 0.38 (9.7) 1.0 (25.4) 3.25 (82.6) 2.19 (55.6) 1.91 (48.5) 0.94 (23.9) 0.91 (23.1) Padlock Cover Gaurd for Flush Pushbutton Catalog No. 10250TA36 1.47 (37.3) 1.25 (31.8) 1.56 (39.6) Protecting Shroud for Jumbo Mushroom Head Button Catalog No. 10250TA56 Padlock Attachment for Maintained Push-Pull Operator Catalog No. 10250TA64 0.44 (11.2) 1.53 (38.9) 1.75 (44.5) 0.84 (21.3) 1.69 (42.9) 1.50 (38.1) 1.31 (33.3) 1.50 (38.1) 2 1.38 (35.1) 1.75 (44.5) 1.81 (46) 1.25 (31.8) Protecting Shroud for Mushroom Head Button Catalog No. 10250TA6 Protecting Shroud for Illuminated Pushbutton Catalog No. 10250TA15 Terminals on Top 1.31 (33.3) 2.16 (54.9) Vertical Rows Legend Plate 1.88 (47.8) B Min. 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.60 (66) 4 Circuit Contact Block 10250T44 Small or None Standard Jumbo Extra Large 1.88 (47.8) 1.88 (47.8) 2.25 (57.2) 2.50 (63.5) Dim. in Inches (mm) A B 1/2 Round Legend Plates 1 or 2 Circuit Contact Blocks 1.63 (41.4) 1.75 (44.5) 2.25 (57.2) 2.50 (63.5) Legend Plate A Dim. in Inches (mm) A Min. 1.14 (29) 6 Mounting Holes Master Test Module, Flasher Module Panel Drilling and Minimum Spacing Small or None Standard Jumbo Extra Large 2.25 (57.2) 2.25 (57.2) 2.25 (57.2) 2.60 (66) If Jumbo plates are to be placed one above the other vertically, add 0.13 (3.3) to minimum dimensions listed. 0.75 (19.1) Multiple Button Guard Number of Elements Dimension A 2 3 4 7 4.0 (101.6) 5.88 (149.4) 7.88 (200.2) 13.38 (339.9) Small Standard Jumbo 1.56 (39.6) 1.59 (40.4) 2.06 (52.3) 0.91 (23.1) 1.07 (27.2) 1.53 (38.9) Square Legend Plates Small Standard Jumbo Extra Large 1.59 (40.4) Sq. 1.75 (44.5) Sq. 2.19 (55.6) Sq. 2.44 (62.0) Sq. 0.90 (22.9) 1.06 (26.9) 1.50 (38.1) 1.63 (41.4) For plastic legend plate, Dimension B is 1.12 (28.4). Note: Locating nib hole or notch is 1.36" - 1.4" (34.5 - 35.6 mm) #29 drill. Enclosure Size (No. of Elements) A B 1.22 (31) Terminals at Side Legend Plate 1.78 (45.2) 1.31 (33.3) A Min. Horizontal Rows Lever for Roto-Push Operator Catalog No. 10250TA13 1.63 (41.4) 0.6 (15.2) B Min. A Min. B Min. Extended Retaining Nut Catalog No. 10250TA12 Padlock Hasp or Flip-Up Guard Catalog No. 10250TA38 0.38 (9.7) Dia. Hole Dimensions in Inches (mm) Wide A High B Deep C Mounting D E 2, 3, & 4 3.75 (95.3) 1.94 (49.3) 0.13 (3.3) 2.69 (68.3) 1.38 (35.1) 6&7 4.0 (101.6) 2.19 (55.6) 0.13 (3.3) 2.88 (73.2) 1.63 (41.4) B E D A Chain Hook Bracket Figure 2-80. Approximate Dimensions in Inches (mm) CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca C 2-168 Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 10250T Series, Ordering Example Ordering Complete Devices Complete 10250T Pushbuttons, Indicating Lights and/or Selector Switch operators including contact block(s) and legend plate can be ordered using a single composite catalogue number. The individually packaged components will be shipped unassembled in a single overpack carton marked with the composite Catalogue Number. Construct Catalogueue Number as follows. Ordering Example 2 Table 2-294. Catalogue Numbering System 10250T411 C21 - 1 53 S33 Operator Insert Hyphen Before Contact Block(s) Lens 10250TC21 Legend Plate 10250TS33 Contact Blocks 10250T1 & 10250T53 For a complete Catalogue Number breakdown, see Pages 2-169 - 2-170. Example: Illuminated Pushbutton Device -- Catalogue Number 10250T411C21-153S33 For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-169 10250T Series, Catalogue Number Structure Catalogue Number Structure Table 2-295. Non-illuminated Pushbuttons Catalogue Numbering System 10250T 10 1 -- 1 Operator 10 11 12 17 50 51 - Flush - Extended - 40 mm Mushroom - 65 mm Mushroom - 1/2 Shroud Vertical Mount - 1/2 Shroud Horizontal Mount Button Colour 1 2 3 4 5 6 8 9 - Circuit (Blank) 1 2 3 51 53 - Black Red Green Yellow Grey White Blue Orange Operator Only 1NO-1NC 2NO 2NC 1NC 1NO Add X at end of Catalogue Number to receive parts assembled from factory. 2 Table 2-296. Illuminated and Non-illuminated Push-Pulls Catalogue Numbering System 10250T 5 63 C47 LED Light Unit (Blank) - Non-ill. (Blank) - Non-ill. 89 - 24V/XFR 89L - 24V/XFR 63 - 120V/XFR 63L - 120V/XFR 64 - 208V/XFR 64L - 208V/XFR 65 - 240V/XFR 65L - 240V/XFR 82 - 277V/XFR 82L - 277V/XFR 66 - 380V/XFR 66L - 380V/XFR 67 - 480V/XFR 67L - 480V/XFR 68 - 600V/XFR 68L - 600V/XFR 69 - 6V/FV 97L - Full Voltage 70 - 12V/FV 79 - 24V/FV 83 - 32V/FV 80 - 120V/RES 81 - 240V/RES (Blank) (Blank) 06 12 24 48 60 2A 2D - 2-Position Maintained 3-Position Mom Push-Mom Pull 3-Position MT Push-Mom Pull 3-Position Mom Push-Mom Pull Incandescent Light Unit LED Voltage Operator 5 4 9 10 - - 1 Non-ill. Incand. 6V AC/DC 12V AC/DC 24V AC/DC 48V AC/DC 60V AC/DC 120V AC 120V DC Operator Only 1NO-1NC 2NO 2NC 1NC 1NO Non-illuminated Button Type B60 - Black 40 mm B62 - Red 40 mm B63 - Red 40 mm - "E" STOP B61 - Green 40 mm B64 - Blue 40 mm J60 - Black 65 mm J62 - Red 65 mm J63 - Red 65 mm - "E" STOP J61 - Green 65 mm J64 - Yellow 65 mm Incandescent LED Lens Type C47 C58 C48 C49 C50 C51 C52 C57 C63 C58 C59 C64 C60 C61 C62 C65 C66 C67 RD ED GD LD AD WD - RS ES GS LS AS YS WS - RH GH AH Red 40 mm Red 40 mm - "E" STOP Green 40 mm Blue 40 mm Amber 40 mm White 40 mm Clear 40 mm Red Side Light Red Side Lt. - "E" STOP Green Side Light Blue Side Light Amber Side Light Yellow Side Light White Side Light Clear Side Light Red Heavy-Duty Green Heavy-Duty Amber Heavy-Duty Add X at end of Catalogue Number to receive parts assembled from factory. CAT.201.01.T.K Circuit (Blank) 1 2 3 51 53 - For more information contact Cutler-Hammer at: www.cutler-hammer.ca Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-170 July 2001 10250T Series, Catalogue Number Structure Table 2-297. Illuminated Pushbuttons Catalogue Numbering System 10250T 416 C21 Incandescent Light Unit 416 411 412 419 413 414 415 473 474 476 477 478 471 472 - 24V/XFR 120V/XFR 240V/XFR 277V/XFR 380V/XFR 480V/XFR 600V/XFR 6V/FV 12V/FV 24V/FV 32V/FV 48V/FV 120V/RES 240V/RES LED Light Unit 2 416L 411L 412L 419L 413L 414L 415L 497L Incandescent Lens Colour C21 C22 C23 C26 C24 C43 C25 - Red Green Yellow White Blue Amber Clear -- 1 LED Voltage (Blank) - Incand. 06 - 6V AC/DC 12 - 12V AC/DC 24 - 24V AC/DC 48 - 48V AC/DC 60 - 60V AC/DC 2A 120V AC 2D 120V DC Circuit (Blank) 1 2 3 51 53 - Operator Only 1NO-1NC 2NO 2NC 1NC 1NO LED Lens Colour RD GD YD WD LD AD - Red Green Yellow White Blue Amber 24V/XFR 120V/XFR 240V/XFR 277V/XFR 380V/XFR 480V/XFR 600V/XFR Full Voltage Add X at end of Catalogue Number to receive parts assembled from factory. Table 2-298. Standard Indicating Lights, PresTest and Master Test Catalogue Numbering System 10250T 203N C1N Light Unit Type Standard -- Incandescent Standard -- LED 181L - 120V/XFR 181N - 120V/XFR 182L - 240V/XFR 182N - 240V/XFR 198L - 277V/XFR 198N - 277V/XFR 183L - 380V/XFR 183N - 380V/XFR 184L - 480V/XFR 184N - 480V/XFR 185L - 600V/XFR 185N - 600V/XFR 197L - Full Voltage 203N - 6V/FV 204N - 12V/FV PresTest -- LED 206N - 24V/FV 221L - 120V/XFR 207N - 32V/FV 222L - 240V/XFR 208N - 48V/FV 223L - 380V/XFR 201N - 120V/RES 224L - 480V/XFR 202N - 240V/RES 225L - 600V/XFR 226N - 120V/Neon 297L - Full Voltage 227N - 240V/Neon PresTest -- Incandescent 221N - 120V/XFR 222N - 240V/XFR 223N - 380V/XFR 224N - 480V/XFR 225N - 600V/XFR 232N - 6V/FV 233N - 12V/FV 235N - 24V/FV 238N - 32V/FV 239N - 48V/FV 231N - 120V/RES 240N - 240V/RES Master Test -- Incandescent 187N - 120V/XFR 189N - 240V AC -- SS Plastic Glass Lens Colour Standard/Master -- Incandescent Red C1N C7N Green C2N C8N Yellow C3N -- White C6N C12N Blue C4N C10N Amber C19N C9N Clear C5N C11N PresTest -- Incandescent Red C21 C13N Green C22 C14N Yellow C23 -- White C26 C18N Blue C24 C16N Amber C43 C15N Clear C25 C17N Standard/Master/PresTest -- LED RP GP YP WP LP AP RG GG -- WG LG AG LED Voltage (Blank) 06 12 24 48 60 2A 2D - Incand. - 6V AC/DC - 12V AC/DC - 24V AC/DC - 48V AC/DC - 60V AC/DC - 120V AC - 120V DC Red Green Yellow White Blue Amber Add X at end of Catalogue Number to receive parts assembled from factory. For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-171 10250T/E34 Series, Renewal Parts Renewal Parts Table 2-299. Replacement Lamps -- For 10250T Illuminated Operators Mfg. Lamp Type Voltage Base Style 120MB 120V #267 #455 #755 #756 #757 6.3V 6.3V 6.3V 12V 24V #1828 32V #1835 55V NE48 120V NE51H-R22 120V NE51H-R68 240V Application Part Number T 3-1/4 Bayonet 10250T Resistor Indicating Light 28-3044 T 3-1/4 Bayonet T 3-1/4 Bayonet T 3-1/4 Bayonet T 3-1/4 Bayonet T 3-1/4 Bayonet 10250T Flasher 10250T Flasher 10250T Transformer, PresTest and Full Voltage 10250T Full Voltage 10250T Full Voltage 10250ED986-4 10250ED986 28-2202 28-5184 28-5185 T 3-1/4 Bayonet T 3-1/4 Bayonet T 4-1/2 Bayonet T 3-1/4 Bayonet T 3-1/4 Bayonet 10250T Full Voltage 10250T Resistor 10250T Neon 10250T Neon 10250T Neon 28-5186 28-5187 28-494 28-3754 28-3755 Price Table 2-300. Replacement LED Lamps -- For 10250T, E34 and E22 Units Voltage Colour 2 Continuous Flashing Price AC DC Catalogue Number Catalogue Number Catalogue Number E22LED006RN E22LED006ON E22LED006YN E22LED006GN E22LED006BN E22LED006WN E22LED006RN E22LED006ON E22LED006YN E22LED006GN E22LED006BN E22LED006WN E22LED006RAF E22LED006OAF E22LED006YAF E22LED006GAF E22LED006BAF E22LED006WAF E22LED006RDF E22LED006ODF E22LED006YDF E22LED006GDF E22LED006BDF E22LED006WDF Red Orange Yellow Green Blue White E22LED012RN E22LED012ON E22LED012YN E22LED012GN E22LED012BN E22LED012WN E22LED012RN E22LED012ON E22LED012YN E22LED012GN E22LED012BN E22LED012WN E22LED012RAF E22LED012OAF E22LED012YAF E22LED012GAF E22LED012BAF E22LED012WAF E22LED012RDF E22LED012ODF E22LED012YDF E22LED012GDF E22LED012BDF E22LED012WDF 24V Red Orange Yellow Green Blue White E22LED024RN E22LED024ON E22LED024YN E22LED024GN E22LED024BN E22LED024WN E22LED024RN E22LED024ON E22LED024YN E22LED024GN E22LED024BN E22LED024WN E22LED024RAF E22LED024OAF E22LED024YAF E22LED024GAF E22LED024BAF E22LED024WAF E22LED024RDF E22LED024ODF E22LED024YDF E22LED024GDF E22LED024BDF E22LED024WDF 48V Red Orange Yellow Green Blue White E22LED048RN E22LED048ON E22LED048YN E22LED048GN E22LED048BN E22LED048WN E22LED048RN E22LED048ON E22LED048YN E22LED048GN E22LED048BN E22LED048WN E22LED048RAF E22LED048OAF E22LED048YAF E22LED048GAF E22LED048BAF E22LED048WAF E22LED048RDF E22LED048ODF E22LED048YDF E22LED048GDF E22LED048BDF E22LED048WDF 60V Red Orange Yellow Green Blue White E22LED060RN E22LED060ON E22LED060YN E22LED060GN E22LED060BN E22LED060WN E22LED060RN E22LED060ON E22LED060YN E22LED060GN E22LED060BN E22LED060WN E22LED060RAF E22LED060OAF E22LED060YAF E22LED060GAF E22LED060BAF E22LED060WAF E22LED060RDF E22LED060ODF E22LED060YDF E22LED060GDF E22LED060BDF E22LED060WDF 120V Red Orange Yellow Green Blue White E22LED120RA E22LED120OA E22LED120YA E22LED120GA E22LED120BA E22LED120WA E22LED120RD E22LED120OD E22LED120YD E22LED120GD E22LED120BD E22LED120WD E22LED120RAF E22LED120OAF E22LED120YAF E22LED120GAF E22LED120BAF E22LED120WAF E22LED120RDF E22LED120ODF E22LED120YDF E22LED120GDF E22LED120BDF E22LED120WDF AC DC Catalogue Number Red Orange Yellow Green Blue White 12V 10V Suitable to replace 6V incandescent lamps on transformer type light units For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. CAT.201.01.T.K For more information contact Cutler-Hammer at: www.cutler-hammer.ca Price Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-172 July 2001 10250T Series, Renewal Parts 2-Position Joystick Operator Mushroom Head Pushbutton Operator Flush Head Pushbutton Operator Mushroom Head Operator with Padlock Attachment Jumbo Mushroom Head Operator Knob-Operated Selector Switch Operator 2 4-Position Joystick Operator Illuminated Pushbutton Operator Full Voltage, Resistor and Transformer Type Illuminated Selector Potentiometers Transformer Type Indicating Light Table 2-301. 10250T Style Operator Renewal Parts Item Description No. No. Part Req. Number 1 Gasket 1 16-1548 2 Mounting Nut 1 15-1530 3 Handle 1 24-5045 4 Knob Knob (Not Shown) for Joystick Operator with Latch 1 1 53-3157 53-3159 5 Common Gate (Supplied with Operator) 2 16-3400 6 Set Screw (#6-32 x 0.250" Long Hollow Hex) 2 11-2014 7 Mushroom Head Button (Includes (2) Item 6) Black Red Yellow Green Blue 1 As Req. Below -- -- -- -- -- 53-1317 53-1317-2 53-1317-3 53-1317-4 53-1317-22 8 Set Screw (#10-32 x 0.250" Long Hollow Hex) 2 11-544 9 Jumbo Mushroom Head Button (Aluminum -- Includes (2) Item 8) Red Black Yellow Green 1 As Req. Below -- -- -- -- 53-1317-9 53-1317-10 53-1317-11 53-1317-12 Jumbo Mushroom Head Button (Aluminum -- Red EMERG. STOP) Does Not Include Item (8) 1 53-1349-18 10 11 Position Gate: 2 Position 3 Position 4 Position 8 Position 1 1 1 1 54-7278 54-7173 54-12282 54-12279 12 Mounting Screw (#6-32 x 0.710" Long) 2 Washer 2 13 Terminal Screw and Lug (Captive) Req. 80-5502 14 Gasket (Supplied with Basic Unit) 1 10250TA79 16-2038 Price Item Description No. No. Part Req. Number 15 Round Head Screw (#4-40 x 0.344" Long) (Supplied with Basic Unit) 2 16 Mounting Screw 2 11-1632 17 Simple Potentiometer (Does Not Include Items 18, 28 or 29) 1,000 Ohms 2,500 Ohms 5,000 Ohms 10,000 Ohms 25,000 Ohms 50,000 Ohms 1 As Req. Below -- -- -- -- -- -- 41-782-2 41-782-3 41-782-10 41-782-4 41-782-5 41-782-6 Price 11-4553 18 Connector (Includes Screw and Lug) 2 25-1851 19 Indicating Plate Standard Size (Without Legend) Large Size (Specify Legend) 1 -- -- As Req. Above 30-4460 10250TR30 20 Retaining Nut 1 15-1547 21 Knob Socket Set Screw (#6-32 x 0.250" Long) 1 1 53-1314 11-2014 22 Coupling 1 29-3749-2 23 Set Screw (#6-32 x 0.188" Long) 1 11-1199 24 Spacer 2 56-1066-18 25 Connector (Includes Screw and Lug) 1 25-1851-2 26 Mounting Nut 1 15-1938 27 4-Position Joystick Operating Mechanism (Complete) 1 24-6565 28 (Not Shown) 4-Position Joystick Operating Mechanism (With Latch) Complete 1 24-6565-2 29 Spring Loaded Latch 1 52-1214-2 30 Hand Operated Latch 1 52-913-3 32-803 For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight July 2001 2-173 10250H Series, Renewal Parts 2 Figure 2-81. Type N Renewal Parts Table 2-302. Assembled Stations -- Type N Renewal Parts Item Description No. No. Part Req. Number Type N -- Square Buttons 1 2 3 4 5 6 7 8 9 10 11 12 Item No. Description No. Part Req. Number Type N -- Square Buttons (Continued) Cover 2 Element Single Element -- Top Button Single Element -- Bottom Button Cover Screw Pushbutton Support Bracket Pushbutton Support Bracket Screw Pushbutton Spring Disc (when used -- 2 element assembly) Pushbutton -- Top Position START/Green RAISE/Black FORWARD/Black OPEN/Black UP/Black Blank/Green Pushbutton -- Bottom Position STOP/Red Extended STOP/Red REVERSE/Black CLOSE/Black DOWN/Black LOWER/Black Blank/Red Pushbutton Element 1NO-1NC 2NO 1NO 1NC Cover Pushbutton Support Bracket Pushbutton -- Top Position FORWARD/Black UP/Black RAISE/Black OPEN/Black FAST/Black 13 1 2 1 1 2 2 49-3524 49-3524-2 49-3524-3 11-2168 79-6649 11-2090 69-2571 16-1960 1 53-1169-3 53-1169-66 53-1169-7 53-1169-9 53-1169-11 53-1169 1 53-1202-2 53-1202-5 53-1169-8 53-1169-10 53-1169-12 53-1169-6 53-1202 14 15 16 17 18 19 20 21 22 23 24 1 1 1 1 86-2588 86-2588-2 86-2588-3 86-2588-4 49-3464 79-6650 53-1170-7 53-1170-4 53-1170-5 53-1170-9 53-1170-6 For pricing information, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. CAT.201.01.T.K Price 25 26 Pushbutton Middle Position REVERSE/Black DOWN/Black LOWER/Black CLOSE/Black SLOW/Black Pushbutton -- Bottom Position STOP/Red Pushbutton Element 2NO-3NC Cover Lens Clear Red Amber Shield Shield Screws Lamp (Neon NE48) Lamp Receptacle Lamp Receptacle Screw Pilot Light Terminal Base Lens Clear Red Amber Pushbutton Support Bracket Pushbutton Element 1NO-1NC 1 53-1169-15 53-1169-18 53-1169-16 53-1169-17 53-1169-13 1 53-1201-2 1 1 1 1 4 1 1 1 1 1 86-2593 49-3524-4 28-494 28-887-2 28-887-3 73-1337 11-2012 28-494 28-902 911-330F1 86-2586 1 1 28-887 28-887-2 28-887-3 79-6650-2 86-2594 1 1 1 1 1 1 1 1 1 10250H2538 86-353 86-353-8 86-353-8 86-353 86-353-3 86-356 86-356 86-356 Type N -- Round Buttons Similar to 27 Pushbutton Assembly and Element for: 10250H289 10250H364 10250H685 10250H665 10250H671 10250H2738 10250H2740 10250H2741 10250H2742 For more information contact Cutler-Hammer at: www.cutler-hammer.ca Price Pushbuttons and Indicating Lights 30.5 mm Heavy-Duty Watertight/Oiltight 2-174 July 2001 10250H Series, Renewal Parts 7 7 7 8 6 9 10 12 10 5 5 4 4 5 4 3 3 2 1 Pushbutton 11 2 1 2 Indicating Light 2 1 Selector Switch Figure 2-82. Type H Renewal Parts Table 2-303. Assembled Stations -- Type H Renewal Parts Item No. Description No. Req. Part Number Price Type H -- Assembled Stations Item No. Description No. Req. Part Number Price Type H -- Assembled Stations (Continued) 1 Screw 2 11-4654 7 Screw 4 11-953 2 Screw 2 11-5719 8 Diaphragm 1 32-253-2 3 Base 1 17-16560 9 Mounting Plate 1 17-19522 4 Contact Blocks See Page 2-157 10 Gasket 1 32-254 5 10250T Operator See Pages 2-137 - 2-156 11 Base 1 17-16561 6 Mounting Plate 1 12 Mounting Plate 1 17-19523 17-19524 For pricing informaiton, refer to the Cutler-Hammer Control & Automation Products Price & Availability Digest. For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K Plaques indicatrices en francais French Language Legend Plates Appendix - A July 2001 E30 - LENTILLES TYPE K COULEUR TEXTE LENTILLE GAUCHE LENTILLE DROITE LENTILLE GAUCHE LENTILLE DROITE ROUGE ROUGE VERT VERT ROUGE VERT VERT ROUGE EN CIRC. EN CIRC. HORS CIRC. HORS CIRC. EN CIRC. HORS CIRC. HORS CIRC. EN CIRC. NO. DE CAT. E30 KK12F KK13F KK22F KK23F VENDE A LA PAIRE SEULEMENT (SOLD IN PAIRS ONLY). 10250T - BOUTONS ETANCHES A L'HUILE TEXTE A COUPS A COUPS ARRIERE A COUPS AVANT A COUPS-MARCHE ARRET NO. DE CAT. 10250T MF19 MF21 MF20 MF41 ARRET D'URGENCE ARRIERE AUTO-HORS CIRC-MAN AVANT MF34 MF13 MF30 MF49 MF15 AVANT-ARRIERE AVANT-HORS CIRC-ARR AVANT-SUR-ARR BAISSER BASSE MF38 MF50 MF69 MF23 MF22 TEXTE NO. DE CAT. TEXTE NO. DE CAT. HORS CIRCUIT OUVERT OUVERT-FERME OUVR-HORS CIRC-FERM PLUS LENT 10250T MF26 MF43 MF53 MF88 LENT LEVER MAN-HORS CIRC-AUTO MANUEL-AUTO MARCHE MF32 MF28 MF68 MF67 MF31 PLUS VITE PRET RAPIDE REENCLENCHEMENT REGLAGE MF87 MF86 MF14 MF29 MF18 MARCHE-A-COUPS MARCHE-SUR-A-COUPS MOTEUR ARRETE MOTEUR EN MARCHE MF44 MF70 MF82 MF81 SORTIE SOUS TENSION SUR SUR-MARCHE MF27 MF80 MF85 MF45 HAUT HAUT-BAS HORS CIRC-EN CIRC EN BAS EN CIRCUIT EN HAUT EN HAUT-EN BAS MF71 MF12 MF25 MF35 MF48 EN HAUT-HORS CIRC-EN BAS ENTREE ESSAI FERMER MF54 MF17 MF83 MF11 EN-ARRET-SUR NO. DE CAT. 10250T MF16 MF40 MF42 MF24 10250T MF84 MF33 MF46 MF47 DECLENCHE DEPART DEPART-A COUPS DEPART-ARRET TEXTE E34 - BOUTONS ETANCHES A L'HUILE TEXTE NO. DE CAT. TEXTE NO. DE CAT. TEXTE NO. DE CAT. TEXTE NO. DE CAT. A COUPS A COUPS ARRIERE A COUPS AVANT A COUPS-MARCHE E34 SPF19 SPF21 SPF20 SPF41 DECLENCHE DEPART DEPART-A COUPS DEPART-ARRET E34 SPF84 SPF33 SPF46 SPF47 HAUT HAUT-BAS HORS CIRC-EN CIRC HORS CIRCUIT E34 SPF16 SPF40 SPF42 SPF24 OUVERT OUVERT-FERME OUVR-HORS CIRC-FERM PLUS LENT E34 SPF26 SPF43 SPF53 SPF88 ARRET ARRET D'URGENCE ARRIERE AUTO-HORS CIRC-MAN AVANT SPF34 SPF13 SPF30 SPF49 SPF15 EN-ARRET-SUR EN BAS EN CIRCUIT EN HAUT EN HAUT-EN BAS SPF71 SPF74 SPF25 SPF35 SPF48 LENT LEVER MAN-HORS CIRC-AUTO MANUEL-AUTO MARCHE SPF32 SPF28 SPF68 SPF67 SPF31 PLUS VITE PRET RAPIDE REENCLENCHEMENT REGLAGE SPF87 SPF86 SPF75 SPF29 SPF18 AVANT-ARRIERE AVANT-HORS CIRC ARR AVANT-SUR-ARR BAISSER BASSE SPF38 SPF50 SPF69 SPF23 SPF22 EN HAUT-HORS CIRC -EN BAS ENTREE ESSAI FERMER SPF54 SPF17 SPF83 SPF73 MARCHE-A-COUPS MARCHE-SUR-A-COUPS MOTEUR ARRETE MOTEUR EN MARCHE SPF44 SPF70 SPF82 SPF81 SORTIE SOUS TENSION SUR SUR-MARCHE SPF27 SPF80 SPF85 SPF45 TOUTES LES PLAQUES SONT NOIRES SAUF INDICATION CONTRAIRE (ALL LEGEND PLATES ARE BLACK UNLESS OTHERWISE TOLD). PLAQUES ROUGE (RED LEGEND PLATES). FOR PRICING INFORMATION, REFER TO THE CUTLER-HAMMER CONTROL & AUTOMATION PRODUCTS PRICE & AVAILABILITY DIGEST. For more information contact Cutler-Hammer at: www.cutler-hammer.ca CAT.201.01.T.K