Weidmuller Product Datasheet Rail Mounted Terminal Blocks 9908500000 KDKS 1 (with BFI/disconnect) Representative Photo Technical Information Clamping Type Screw Clamp Series SAK Series W Series Rail Type Combi Foot Function Circuit Protection Configuration Fuse and Feed Through Single Level Wire Size #22...12 AWG Current 10 A upper level, 20 A lower level Voltage 300 V Color/Material Beige PA Special Requirements Blown fuse indication 24 VDC Hinge (-) Technical Data UL CSA VDE Rated Voltage 300 V 300 V 500 V Rated Current 10 A 20 A 10 A 25 A #22...12 AWG #22...12 AWG Wire Size Additional Data Width/Length/Height mm (in.) 8/73.5/55.7 (.31"/2.89"/2.19") Insulation Stripping Length mm (in.) 9 (.35") Torque Nm (lb. in) 0.6 (5.5) Clamping Screw M3 Flammability Class UL 94 (V2) Suggested Accessories DIN-rail End bracket End plate/partition (AP/TW) Ferrules Fuses Marking pens Marking tags (DEK) http://catalog.weidmuller.com/asp/datasheet.asp?PN=9908500000 (1 of 2)4/19/2005 1:20:28 PM 4 mm Weidmuller Product Datasheet Mounting brackets Tools Product Liability The above information describes our products. It does not constitute guaranteed properties and is not intended to affirm the suitability of a product for a particular application. Regrettably, omissions and exceptions cannot be completely ruled out. Technical data are always specified by their average values. Exact data and the tolerances which apply to our processes can be requested from: Weidmuller - North America United States 001 (800) 849-9343 Canada 001 (800) 268-4080 or Weidmuller - Germany Telephone operator 0049 (-5252) 960-0 http://catalog.weidmuller.com/asp/datasheet.asp?PN=9908500000 (2 of 2)4/19/2005 1:20:28 PM