RoHS compliant Specification of Dielectric Filter (Preliminary) Toko P/No. : TDFS1C-2326C-10A 1.Outline Dimension 4.2 1.25 2.0max 2.5 2.55 23F 0.45 4.60.5 0.8 5.0 Tolerance :0.3 Unit :mm OUT IN Parts of not metallized GND 2.Electrical Characteristics Center Frequency(Fo) Passband Width Passband Insertion Loss Passband Ripple Passband V.S.W.R. Attenuation (absolute value) at 1703.0 MHz at 2127.0 MHz at 2162.0-2175.0 MHz at 2227.0 MHz at 2400.0 MHz at 2426.0 MHz at 2500.0 MHz Specification 2326.0 MHz : : Fo 7.0 MHz : : : : : : : : : : 2.1 dB 0.5 dB 2.0 33.0 20.0 12.0 10.0 3.0 6.0 15.0 dB dB dB dB dB dB dB max. max. max. min. min. min. min. min. min. min. In/Out Impedance : 50 This filter was measured on a PC board in TOKO standard test jig. Test jig loss (0.1dB) is not included in IL and Attenuation. Precaution Do not connect terminals to DC voltage. Notice Note that the contents are subject to change or discontinuation without notice. Please request for official specification for approval before using this products. Toko,INC. 081204