26.9 x 13.0 x 2.5 mm SMT Bluetooth Module
APPLICATIONS:
FEATURES:
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
||||||| | | | | | | | |
ABBTM-2.4GHz-T
26.9 x 13.0 x 2.5 mm SMT
• Bluetooth Spec v2.0+EDR Compliant
• Class 2, up to 10-meter range
• Complete 2.4GHz Bluetooth® System
• Power management: low power 1.8V operation for Bluetooth® core
• Compact size: 26.9mm (L) x 13 (W) mm x 2.5mm (H)
• Bluetooth® Profile Supported: SPP
• Internal antenna
• On-board flash memory (8Mbits)
• Surface mount module for embedded applications
• Several firmware options
• Rewritable flash memory for easy upgrade route
• Custom firmware production available
• Hand-held devices
• Printers
• Personal Navigation Devices
• PDAs and other portable terminals
Abracon's ABBTM is a complete Bluetooth® solution. It is built on CSR BC04-External Core and 8Mbit Flash memory. It’s a short range,
compact and cost effective module. Designed to be embedded into electronic devices needing Bluetooth® connectivity.
The ABBTM module is a power class2 Bluetooth® device, and is in compliance with version 2.0+EDR of the Bluetooth® specification. It
includes CSR BC04-External Core and 8Mbit Flash memory, internal antenna, supporting circuitry, together with higher-level software proto-
cols and applications such as L2CAP, SDP and GAP are resident in the flash memory.
GENERAL DESCRIPTION
Operating Frequency Band
2.4GHz ~ 2.48GHz Unlicensed ISM Band
Bluetooth Specification
V2.0 + EDR
Output Power Class
Class 2
Operating Voltage
+3.3V
Host Interface
UART
Audio Interface
PCM Interface
Flash Memory Size
8 MB
Absol
ute Maximum Ratings
Minimum
Maximum
Storage temperature
-40
ºC
+150
ºC
Supplyvoltage:VBAT
-0.4V
5.6V
Other terminal voltages
VSS-0.4V
VDD+0.4V
Recommended Operating Conditions
Minimum Maximum
Operating temperature range
-40
ºC
+85
ºC
Guaranteed RF performance range
-40
ºC
+85
ºC
Supplyvoltage:VBAT
2.2V
4.2V
ELECTRICAL SPECIFICATIONS:
FCC ID# A8RABBTM2-4G
Compliant to MSL level 3
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 05.01.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
26.9 x 13.0 x 2.5 mm SMT Bluetooth Module
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
||||||| | | | | | | | |
ABBTM-2.4GHz-T
26.9 x 13.0 x 2.5 mm SMT
POWER CONSUMPTION
Note:
Low power mode on the linear regulator is entered and exited automatically when the chip enters/leaves Deep Sleep mode.
Operation Mode Connection
Type
UART Rate
(kbps) Average Unit
Page scan
-
115.2
0.42
mA
ACL No traffic
Master
115.2
4.60
mA
ACL With file transfer
Master
115.2
10.3
mA
ACL 1.28s sniff
Master
38.4
0.37
mA
ACL 1.28s sniff
Slave
38.4
0.42
mA
SCO HV3 30ms sniff
Master
38.4
19.8
mA
SCO HV3 30ms sniff
Slave
38.4
19.0
mA
Standby Host connection
-
38.4
40
µA
REFERENCE CIRCUIT
BlueTooth UART Tx
BlueTooth UART RX
Module Power
BT_TX
BT_RX
3V3
LED State indication
FCC ID# A8RABBTM2-4G
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 05.01.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
26.9 x 13.0 x 2.5 mm SMT Bluetooth Module
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
||||||| | | | | | | | |
ABBTM-2.4GHz-T
26.9 x 13.0 x 2.5 mm SMT
Firmware Configuration
a) UART Baud: 115200 , N, 8, 1
b) BlueTooth Name: ABBTM
c) Pin Code: 0000
State Indicator
a) Connectable and discoverable LED: 100mS High Level per 2S
b) Connected LED: always on
Software Description
1. After Power on 3V3, the module is connectable and Pairing
2. ABBTM-2.4GHz-T can be found with the name “ABBTM” via any Bluetooth device
3. Input the Pincode “0000”, you can pair with the module named “ABBTM”
4. Then the ABBTM can be connected
5. Data can be transferred between the ABBTM and any other Bluetooth device
MECHANICAL DIMENSIONS
FCC ID# A8RABBTM2-4G
No. Pin Name No. Pin Name No. Pin Name
1 UART-TX 13 GND 25 PIO (2)
2 UART-RX 14 GND 26 PIO (3)
3 UART-CTS 15
4 UART-RTS 16 SPI-CSB 28 PIO (5)
5 PCM-CLK 17 SPI-MOSI 29 PIO (6)
6 PCM-OUT 18 SPI-MISO 30 PIO (7)
7 PCM-IN 19 SPI-CLK 31 PIO (8)
8 PCM-SYNC 20 USB D+ 32 PIO (9)
9 AI0 (0) 21 GND 33 PIO (10)
10 AIO (1) 22 GND 34 PIO (11)
11 RESET 23 PIO (0)
12 +3.3V 24 PIO (1)
Dimensions: mm.
Pin # 34
Pin # 1
Recommended Land Pattern
Note: Specified dimensions without tolerance are listed for reference purposes only.
NC 27 PIO (4)
NC
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 05.01.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
Pin #Name Type Function
1
UART-TX
CMOS Output
UART Data Output
2
UART-RX
CMOS Input
UART Data Input
3
UART-CTS
CMOS Input
UART Clear To Send Active Low
4
UART-RTS
CMOS Output
UART Request To Send Active Low
5
PCM-CLK
Bi-directional
Synchronous Data Clock
6
PCM-OUT
CMOS Output
Synchronous Data Output
7
PCM-IN
CMOS Input
Synchronous Data Input
8
PCM-SYNC
Bi-directional
Synchronous Data Sync
9
AIO(0)
Bi-directional
Programmable Input/Output Line
10
AIO(1)
Bi-directional
Programmable Input/Output Line
11 RESETB CMOS Input
Reset if low.Input debounced so must be
low for>5ms to cause a reset
12
3.3V
POWER
+3.3V Supply
13
GND
GND
Ground
14
GND
GND
Ground
15
USB D-
Bi-directional
USB Data Minus
16
SPI-CSB
CMOS Input
Chip Select For Synchronous Serial Interface
17
SPI-MOSI
CMOS Input
Serial Peripheral Interface Data Input
18
SPI-MISO
CMOS Output
Serial Peripheral Interface Data Output
19
SPI-CLK
CMOS Input
Serial Peripheral Interface Clock
20 USB D+ Bi-directional
USB Data Plus with selectable internal 1.5KΩ
21
GND
GND
Ground
22
GND
GND
Ground
23 PIO(0)
Bi-directional with
programmable
strength
Control output for external LNA (if fitted)
24 PIO(1)
Bi-directional with
programmable
strength
Control output for external PA (if fitted)
25
PIO(2)
Bi-directional
Programmable Input/Output Line
26
PIO(3)
Bi-directional
Programmable Input/Output Line
27 PIO(4)
Bi-directional with
programmable
strength
Programmable Input/Output Line or
optional
BT_Priority/CH_Clk output for co-
28 PIO(5)
Bi-directional with
programmable
strength
Programmable Input/Output Line or
optional
BT_Active output for co-existence
29 PIO(6)
Bi-directional with
programmable
strength
Programmable Input/Output Line or
optional
WLAN_Active/Ch_Data input for co-
30
PIO(7)
Bi-directional
Programmable Input/Output Line
31
PIO(8)
Bi-directional
Programmable Input/Output Line
32
PIO(9)
Bi-directional
Programmable Input/Output Line
33
PIO(10)
Bi-directional
Programmable Input/Output Line
34
PIO(11)
Bi-directional
Programmable Input/Output Line
26.9 x 13.0 x 2.5 mm SMT Bluetooth Module
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
||||||| | | | | | | | |
ABBTM-2.4GHz-T
26.9 x 13.0 x 2.5 mm SMT
PIN DESCRIPTION
FCC ID# A8RABBTM2-4G
NC NC
NC NC
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 05.01.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
26.9 x 13.0 x 2.5 mm SMT Bluetooth Module
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
||||||| | | | | | | | |
ABBTM-2.4GHz-T
26.9 x 13.0 x 2.5 mm SMT
PART IDENTIFICATION:
MARKING
TSmax to TL(Ramp-up Rate)
3°C/second max.
Preheat
Temperature Min. (TSMin.)
Temperature Typical (TSTyp.)
Temperature Max. (TSMax.)
Time (tS)
150°C
175°C
200°C
60 ~ 180 seconds
Ramp-up rate (T
L
to T
p
)
3°C/second max.
Time Maintained Above:
--Temperature (TL)/Time (TL) 217°C/60 ~ 150 seconds
Peak Temperature (Tp)
250°C max. for 10 seconds
Target Peak Temperature (TpTarget)
250°C +0/-5°C
Time within 5°C of actual peak (tp)
20 ~ 40 seconds
Ramp-down Rate 6°C/second max.
Tune 25°C to Peak Temperature (t)
8 minutes max.
REFLOW PROFILE
Line #4: RoHS
Line #4: CE Certification Symbols
Line # 3: FCC ID
Line #1: Abracon Logo
Line #2: Abracon Part #
Line #3: Date Code
(wk / year)
FCC ID# A8RABBTM2-4G
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 05.01.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
ABBTM-2.4GHz -
Packaging Options
Blank Bulk
T 500 units per reel
T2 250 units per reel
26.9 x 13.0 x 2.5 mm SMT Bluetooth Module
Pb
RoHS
Compliant
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001:2008
CERTIFIED
||||||| | | | | | | | |
ABBTM-2.4GHz-T
26.9 x 13.0 x 2.5 mm SMT
PACKAGING:
(500) units per reel standard, (250) units per reel available (option # T2)
a) Unless otherwise specified, the tolerance is ±0.1mm
b) The carrier tape material thickness is 0.4mm
c) Unless otherwise specified, the round corner is R0.3; the peeling angle is no greater than 5°
d) The finished products has no rough edges and no damage; cover tape should is sealed
e) Material is ROHS compliant
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
FCC ID# A8RABBTM2-4G
Packaging:
ABBTM-2.4GHz-T and ABBTM-2.4GHz-T2 devices will be packaged per MSL level-3 requirements; Labeled as MSL 3,
Tape-Packed + Vacuum-Packed with Antistatic bag, Desiccant, Humidity Indicator Card (HIC). Ref: IPC/JEDEC J-STD-033B.1
2 Faraday, Suite# B
|
Irvine
|
CA 92618
Revised: 05.01.15
Ph. 949.546.8000
|
Fax. 949.546.8001
Visit www.abracon.com for Terms and Conditions of Sale
LLC
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ABRACON:
ABBTM-2.4GHz-T ABBTM-2.4GHz-T2 ABBTM-2.4GHz-52-T ABBTM-2.4GHz-51-T ABBTM-2.4GHz-33-T ABBTM-
2.4GHz-31-T ABBTM-2.4GHz-31 ABBTM-2.4GHz-33 ABBTM-2.4GHz-51 ABBTM-2.4GHz-52 ABBTM-2.4GHZ-51-
101 ABBTM-2.4GHz
