1
03-2018, Rev. 0318
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEG
Code E (1.2VA) coil
12 12 50/60 9.6 1.2 52 1.2
24 24 50/60 19.2 2.4 198 1.2
48 48 50/60 38.4 4.8 824 1.2
120 110/120 50/60 96 12 3728 1.2
240 240/240 50/60 192 24 14810 1.2
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 1500Vrms
between contact and coil 2500Vrms
Initial insulation resistance
between insulated elements 1x109Ω
Clearance/creepage
between contact and coil 3.1 / 6.3mm (UL508)
Tracking index of relay base 175
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
AC coil -40ºC to 85ºC
Category of environmental protection
IEC 61810 RTI - dust protected
Vibration resistance (functional) 1.5mm, 10-55 Hz
Shock resistance (functional) 10g for 11msec
Shock resistance (destructive) 100g
Terminal type quick connect
Weight 33g
Resistance to soldering heat THT
IEC 60068-2-20 250°C
Packaging/unit 250 pcs
n 30A, 1NO, 20A/10A 1CO
n Flange mount
n 1.6VA coil (cULus recognized)
n 1.2VA coil (VDE approved)
n 2.5kV coil - contact dielectric
Typical applications
HVAC, power supplies, domestic appliances, measurement and controls.
Approvals
UL E58304; CSA LR48471; VDE REG,-Nr.A876
Technical data of approved types on request.
Contact Data
Contact arrangement
1 form A (NO), 1 form B (NC), 1 form C (CO)
Rated voltage 250VAC
Max. switching voltage 277VAC
Rated current 30A (NO), 10A (NC), 20A/10A (CO)
Breaking capacity max. 7500VA
Contact material AgSnOInO, AgCdO
Min. recommended contact load 1A, 5VDC or 12VAC
Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC
Frequency of operation, with/without load 6/300min
Operate/release time max., including bounce 15/15ms
Contact ratings
Type Load Cycles
UL508
AgCdO
NO 30A, 125VAC, resistive 100x103
NO 20A, 28VDC, resistive 100x103
NO 1hp, 277VAC 6,000
CO 30A(NO)/15A(NC), 125VAC, general purpose 100x103
CO 10A(NO)/10A(NC), 240VAC, general purpose 100x103
CO 30A(NO)/20A(NC), 240VAC, resistive 6,000
NC 20A, 240VAC, resistive 6,000
AgSnOInO
NO 30A, 250VAC, resistive 30x103
NO 15A, 240VAC, general purpose 100x103
NO 1hp, 120VAC 6,000
CO 20A(NO)/10A(NC), 250VAC, resistive 6,000
NC 1/2hp, 240VAC 6,000
IEC 61810
NO 15A, 277VAC, cos =1, 85°C 100x103
Mechanical endurance 5x106 ops.
Coil Data
Coil voltage range 12 to 240VAC
Max. coil power Coil A, 1.6VA Coil E, 1.2VA
Coil insulation system according UL Class F
Coil versions, AC coil
Coil Rated Frequency Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VAC HZ VAC, 60HZ VAC, 60HZ Ω±10% VA
Code A (1.6VA) coil
12 12 50/60 9.6 1.2 36 1.6
24 24 50/60 19.2 2.4 136 1.6
48 48 50/60 38.4 4.8 548 1.6
120 110/120 50/60 96 12 2800 1.6
240 220/240 50/60 192 24 11500 1.6
277 250/277 50/60 221.6 27.7 15625 1.6
Dimensions
T9C Series, AC Coil Power Relay
General Purpose
High Power PCB Relays
2
03-2018, Rev. 0318
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
OEGOEG
Terminal assignment
1 form A 1 form B 1 form C
Product Code Contact arrangement Contact material Coil voltage Part Number
T9CP1A52-12 1 form A (NO) AgCdO 12 VAC 1649341-3
T9CP1A52-24 24 VAC 1649341-1
T9CP1A52-48 48 VAC 1649341-4
T9CP1A52-120 120 VAC 1649341-5
T9CP1A52-240 240 VAC 1649341-6
T9CP5A52-12 1 form C (CO) 12 VAC 1-1649341-1
T9CP5A52-24 24 VAC 1-1649341-2
T9CP5A52-48 48 VAC 1-1649341-3
T9CP5A52-120 120 VAC 1-1649341-4
T9CP5A52-240 240 VAC 1-1649341-5
T9CP1A54-12 1 form A (NO) AgSnInO 12 VAC 1649341-7
T9CP1A54-24 24 VAC 1649341-8
T9CP1A54-48 48 VAC 1649341-9
T9CP1A54-120 120 VAC 1-1649341-0
T9CP1A54-240 240 VAC 1649341-2
T9CP2A54-120 1 form B (NC) 120 VAC 2-1649341-5
T9CP2A54-240 240 VAC 2-1649341-4
T9CP5A54-12 1 form C (CO) 12 VAC 1-1649341-6
T9CP5A54-24 24 VAC 1-1649341-7
T9CP5A54-48 48 VAC 1-1649341-8
T9CP5A54-120 120 VAC 1-1649341-9
T9CP5A54-208 208 VAC 2-1649341-6
T9CP5A54-240 240 VAC 2-1649341-0
T9CP5A54-277 277 VAC 2-1649341-7
Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request.
General Purpose
High Power PCB Relays
T9C Series, AC Coil Power Relay (Continued)
Product code structure Typical product code T9C P 1 A 5 4 -24
Type
T9C Power Relay T9C AC coil
Enclosure
P Dust protected (flange mount)
Contact arrangement
1 1 form A (1 NO);
2 1 form B (1 NC)
5 1 form C (1 CO);
Coil input
A AC voltage, 1.6VA
E AC voltage, 1.2VA
Mounting and termination
5 Flanged mounting; 4.75 mm (.187) QC for coil and 6.35mm (.250in) QC for contacts
Contact material
2 AgCdO
4 AgSnOInO
Coil voltage
Coil code: please refer to coil versions table
