EB8 www.vishay.com Vishay Dale Edgeboard Connectors, Dual Readout FEATURES ELECTRICAL SPECIFICATIONS Current Rating: 5 A Test Voltage Between Contacts: At sea level: 1800 VRMS At 70 000 feet (21 336 meters): 450 VRMS Insulation Resistance: 5000 M minimum at 500 VDC potential Contact Resistance: 30 mV maximum at rated current (with gold plating) Operating Temperature: -55 C to +125 C Humidity: 96 h at 90 % relative humidity at +40 C, dried at room temperature for 3 h minimum, insulation resistance was greater than 5000 M Durability: (with gold plating) after 500 cycles of insertion and withdrawal of a 0.070" (1.78 mm) thick steel test gauge, contact resistance less than 0.030 V at 5 A and individual contact retention force when measured with 0.054" (1.37 mm) thick steel test slug greater than 1/2 oz. Shock: three 50G shocks in each of 3 mutually perpendicular planes with no loss of continuity Vibration: 2 h in each of 3 mutually perpendicular planes, frequency sweep 10 cps to 55 cps at 0.06 double amplitude with no loss of continuity PHYSICAL SPECIFICATIONS Contact Type: bifurcated bellows Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side Contact Spacing: 0.156" (3.96 mm) center to center Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm) Card Slot Depth: dual readout = 0.330" (8.38 mm) * 0.156" C-C x 0.200" grid (3.96 mm x 5.08 mm) * Greater design latitude 3 body materials: diallyl phthalate, phenolic and glass-filled polyester 6 contact termination styles, 8 body sizes, 7 mounting styles * Bifurcated bellows contacts provide 2 flexing contact surfaces to assure positive contact * Accepts PC board thickness of 0.054" to 0.071" (1.37 mm to 1.80 mm) * Polarization between contact positions in all sizes * Selective gold plating APPLICATIONS For use with 0.062" (1.57 mm) printed circuit boards requiring an edgeboard type connector on 0.156" (3.96 mm) centers MATERIAL SPECIFICATIONS Body: "1" glass-filled diallyl phtalate per MIL-M-14, type SDG-F green, flame retardant (UL 94 V-0) "2" glass-filled phenolic per MIL-M-14, type MFH dark green, flame retardant (UL 94 V-0) "3" thermoplastic polyester, glass-filled, black, flame retardant (UL 94 V-0) "5" thermoplastic polyphenylene sulfied, glass-filled, brown, flame retardant (UL 94 V-0) Contacts: phosphor bronze Polarizing Key: glass reinforced nylon, flame retardant (UL 94H-B) Contact Plating: gold (see Ordering Information) Note * High temperature burn-in, edgeboard connectors, 0.156" (3.96 mm) center to center are on www.vishay.com/doc?36006 ORDERING INFORMATION EB8 MODEL 1 BODY MATERIAL Optional body material 1 = diallyl phthalate 2 = phenolic 3 = glass-filled polyester 5 = glass-filled polyphenylene sulfied Revision: 19-Jul-2018 A STANDARD TERMINAL VARIATIONS A, C, D, K, L, or E 22 CONTACTS PER SIDE 6, 10, 12, 15, 18, 22, 24 or 25 SG CONTACT PLATING SG = selective gold plating (0.00003" (0.000762 mm) minimum thick) on contact area with gold flash on terminal SGF = selective gold plating (0.000010" (0.000254 mm) minimum thick) on contact area with gold flash on terminal. All gold plating over 0.00005" (0.00127 mm) minimum nickel underplate. Contact factory for additional plating options. X MOUNTING VARIATIONS A POLARIZING KEY POSITIONS Key(s) are located to right of position(s) designated. Required only when polarizing keys are to be factory installed Document Number: 36005 1 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EB8 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.030 (0.762) 0.060 (1.52) R Typ. 0.350 (8.89) Typ. A B D E C C 0.156 (3.96) Typ. See Table for Terminal Variations 0.460 (11.70) Section C to C: 0.250 (6.35) 0.340 (8.64) Polarizing Key: 0.054 to 0.071 (1.37 to 1.80) 0.330 (8.38) Depth of Card Insertion 0.325 (8.26) When ordering polarizing keys individually, specify by the Model Number: PK-8 between contacts. Hand insertion tool, TPK-8, provided upon request. 0.200 (5.08) # OF CONTACT POSITIONS 0.023 (0.584) 0.120 (3.05) A B D E 6 1.78 (45.21) 1.531 (38.89) 1.240 (31.50) 1.100 (27.94) 10 2.41 (61.21) 2.156 (54.76) 1.864 (47.35) 1.724 (43.79) 12 2.72 (69.09) 2.469 (62.71) 2.176 (55.27) 2.036 (51.71) 15 3.19 (81.03) 2.937 (74.60) 2.644 (67.16) 2.504 (63.60) 18 3.66 (92.96) 3.406 (86.51) 3.112 (79.05) 2.972 (75.49) 22 4.28 (108.71) 4.031 (102.39) 3.736 (94.89) 3.596 (91.34) 24 4.59 (116.59) 4.344 (110.33) 4.051 (102.89) 3.911 (99.34) 25 4.75 (120.65) 4.500 (114.30) 4.207 (106.86) 4.067 (103.30) Revision: 19-Jul-2018 Document Number: 36005 2 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EB8 www.vishay.com Vishay Dale MOUNTING VARIATIONS in inches (millimeters) Type "V" Clearance Hole Type "VI" Clearance Hole No Mounting Pad 0.250 (6.35) Ref. 0.142 (3.61) Dia. Type "XI" Clearance Hole No Mounting Pad 0.142 (3.61) Dia. 0.010 (0.254) 0.000 (0.000) Type "Y" Threaded Insert Revision: 19-Jul-2018 0.250 (6.35) Ref. 0.128 (3.25) Dia. Type "Z" Floating Bushing Radial Float 0.047 (1.19) 0.250 (6.35) Ref. 4-40 UNC-2B Type "X" Clearance Hole 0.250 (6.35) Ref. 0.220 (5.59) Ref. 0.220 (5.59) Ref. 0.128 (3.25) Dia. Type "W" No Mounting Flange 0.250 (6.35) Ref. 0.116 (2.95) Dia. 0.250 (6.35) Dia. Note: Overall body length increased by 0.060 (1.52) 0.270 (6.86) Document Number: 36005 3 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 EB8 www.vishay.com Vishay Dale TERMINAL VARIATIONS in inches (millimeters) Type "A" Pierced Type "D" Solder Dip Type "C" To fit 3, #22 AWG Wires To fit 0.051 (1.30) Min. Through Hole To fit 0.051 (1.30) Min. Through Hole 0.086 (2.18) 0.200 0.015 (5.08 0.381) 0.200 0.015 (5.08 0.381) 0.200 0.015 (5.08 0.381) 0.104 0.015 (2.64 0.381) 0.125 0.015 (3.18 0.381) Type "K" Solder Dip Type "L" Solder Dip To fit 0.051 (1.30) Min. Through Hole To fit 0.036 (0.914) Min. Through Hole 0.200 0.015 (5.08 0.381) 0.200 0.015 (5.08 0.381) 0.156 0.015 (3.96 0.381) 0.200 0.015 (5.08 0.381) Type "E" Card Extender 0.200 0.015 (5.08 0.381) 0.086 (2.18) 0.100 (2.54) 120 Typ. Revision: 19-Jul-2018 0.050 (1.27) Uses Type "A" Contact 15 Typ. Document Number: 36005 4 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: EB82-S0K2240W EB83-S0L1540X EB81-S0A1860Y EB83-S0C0640W EB81-S0D1540X EB81-S0E2540W EB83S0D1840V EB81-S0L1260W EB81-S0L0660W EB81-S0L0660X EB83-S0L1860X EB81-S0L1060W EB83S0D1040W EB83-S0K2260X EB83-S0E1840W EB81-S0C1060W EB83-S0K1860V EB85-P0A1830X EB83S0A2260X EB85-P0A1530X EB82-S0A1560X EB81-S0A1240X EB81-S0K1860X EB81-S0L0660X-B EB82S0A2240X EB85-P0A2430X EB82-S0A0640W EB82-S0L2260X EB85-P0A2530X EB85-P0A1230X EB82S0A1540X EB83-S0E1860W EB81-S0A2460V EB81-S0L1860W EB81-S0A2260Z EB83-S0C1560W EB83S0A1540Y EB81-S0D1860X EB81-S0K1560W EB85-P0E1830X EB81-S0K2240X EB82-S0A1860X EB85P0A1030X EB83-S0A2440X EB83-S0C1240X EB83-S0L2240X EB81-S0D1560X EB83-S0L2240W EB82S0A1840X EB82-S0A2540X EB85-P0E1030X EB81-S0K1040X EB83-S0A1240V EB81-S0A1540V EB83S0C1040X EB81-S0K0660W EB81-S0A0640V EB81-S0C1540W EB85-P0A2230X EB83-S0E2540W EB83S0A1560X EB83-S0A2560V EB85-P0E2230X EB83-S0A2240X EB83-S0A2240V EB81-S0A2240X EB81S0A2240Z EB83-S0C1540X EB82-S0C1060W EB83-S0D2540W EB81-S0A1040V EB83-S0A0640V EB81S0D2260X PK-8