EB8
www.vishay.com Vishay Dale
Revision: 19-Jul-2018 1Document Number: 36005
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Edgeboard Connectors, Dual Readout
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 M minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: -55 °C to +125 °C
Humidity: 96 h at 90 % relative humidity at +40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 M
Durability: (with gold plating) after 500 cycles of insertion
and withdrawal of a 0.070" (1.78 mm) thick steel test
gauge, contact resistance less than 0.030 V at 5 A and
individual contact retention force when measured with 0.054"
(1.37 mm) thick steel test slug greater than ½ oz.
Shock: three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
PHYSICAL SPECIFICATIONS
Contact Type: bifurcated bellows
Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side
Contact Spacing: 0.156" (3.96 mm) center to center
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: dual readout = 0.330" (8.38 mm)
Note
• High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
FEATURES
• 0.156" C-C x 0.200" grid (3.96 mm x 5.08 mm)
• Greater design latitude
3 body materials: diallyl phthalate, phenolic and glass-filled
polyester
6 contact termination styles, 8 body sizes, 7 mounting
styles
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes
• Selective gold plating
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
MATERIAL SPECIFICATIONS
Body:
“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F
green, flame retardant (UL 94 V-0)
“2” glass-filled phenolic per MIL-M-14, type MFH dark green,
flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,
flame retardant (UL 94 V-0)
Contacts: phosphor bronze
Polarizing Key: glass reinforced nylon, flame retardant
(UL 94H-B)
Contact Plating: gold (see Ordering Information)
ORDERING INFORMATION
EB8 1 A 22 SG
X
A
MODEL BODY MATERIAL
Optional body
material
1 = diallyl phthalate
2 = phenolic
3 = glass-filled
polyester
5 = glass-filled
polyphenylene
sulfied
STANDARD
TERMINAL
VARIATIONS
A, C, D,
K, L, or E
CONTACTS
PER SIDE
6, 10, 12,
15, 18, 22,
24 or 25
CONTACT PLATING
SG = selective gold plating
(0.00003" (0.000762 mm) minimum
thick) on contact area with gold flash
on terminal
SGF = selective gold plating
(0.000010" (0.000254 mm)
minimum thick) on contact area with
gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel
underplate.
Contact factory for additional plating
options.
MOUNTING
VARIATIONS
POLARIZING
KEY POSITIONS
Key(s) are located to
right of position(s)
designated. Required
only when polarizing
keys are to be factory
installed
EB8
www.vishay.com Vishay Dale
Revision: 19-Jul-2018 2Document Number: 36005
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches (millimeters)
Section C to C: Polarizing Key:
When ordering polarizing keys individually, specify by the
Model Number:
PK-8 between contacts. Hand insertion tool, TPK-8,
provided upon request.
# OF CONTACT
POSITIONS ABDE
6 1.78 (45.21) 1.531 (38.89) 1.240 (31.50) 1.100 (27.94)
10 2.41 (61.21) 2.156 (54.76) 1.864 (47.35) 1.724 (43.79)
12 2.72 (69.09) 2.469 (62.71) 2.176 (55.27) 2.036 (51.71)
15 3.19 (81.03) 2.937 (74.60) 2.644 (67.16) 2.504 (63.60)
18 3.66 (92.96) 3.406 (86.51) 3.112 (79.05) 2.972 (75.49)
22 4.28 (108.71) 4.031 (102.39) 3.736 (94.89) 3.596 (91.34)
24 4.59 (116.59) 4.344 (110.33) 4.051 (102.89) 3.911 (99.34)
25 4.75 (120.65) 4.500 (114.30) 4.207 (106.86) 4.067 (103.30)
C
C
A
B
E
D
0.060 (1.52)
R Typ.
0.340
(8.64)
0.030 (0.762)
0.350 (8.89)
Typ.
0.156 (3.96)
Typ.
See Table for
Terminal Variations
0.250
(6.35)
0.460
(11.70)
0.200
(5.08)
0.054 to 0.071
(1.37 to 1.80)
0.330 (8.38)
Depth of
Card Insertion
0.023
(0.584)
0.120
(3.05)
0.325
(8.26)
EB8
www.vishay.com Vishay Dale
Revision: 19-Jul-2018 3Document Number: 36005
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING VARIATIONS in inches (millimeters)
Type “V”
Clearance Hole
0.250
(6.35)
Ref.
0.142 (3.61) Dia.
Type “VI”
Clearance Hole
No Mounting Pad
0.142
(3.61)
Dia.
0.220 (5.59)
Ref.
Type “W”
No Mounting Flange
0.010 (0.254)
0.000 (0.000)
Type “X”
Clearance Hole
0.250
(6.35)
Ref.
0.128 (3.25) Dia.
Type “XI”
Clearance Hole
No Mounting Pad
0.128
(3.25)
Dia.
0.220 (5.59)
Ref.
Type “Y”
Threaded Insert
0.250 (6.35)
Ref.
0.250 (6.35)
Ref.
4-40
UNC-2B
Type “Z”
Floating Bushing Radial Float 0.047 (1.19)
Note: Overall body length
increased by 0.060 (1.52)
0.116
(2.95)
Dia.
0.250 (6.35)
Dia.
0.270 (6.86)
0.250 (6.35)
Ref.
EB8
www.vishay.com Vishay Dale
Revision: 19-Jul-2018 4Document Number: 36005
For technical questions, contact: connectors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TERMINAL VARIATIONS in inches (millimeters)
Type “A”
Pierced
0.086
(2.18)
0.200 ± 0.015
(5.08 ± 0.381)
To fit 3,
#22 AWG
Wires
Type “C”
0.200 ± 0.015
(5.08 ± 0.381)
To fit 0.051 (1.30)
Min. Through Hole
0.125 ± 0.015
(3.18 ± 0.381)
Type “D”
Solder Dip
0.200 ± 0.015
(5.08 ± 0.381)
To fit 0.051 (1.30)
Min. Through Hole
0.104 ± 0.015
(2.64 ± 0.381)
Type “K”
Solder Dip
0.200 ± 0.015
(5.08 ± 0.381)
To fit 0.051 (1.30)
Min. Through Hole
0.200 ± 0.015
(5.08 ± 0.381)
Type “L”
Solder Dip
0.200 ± 0.015
(5.08 ± 0.381)
To fit 0.036 (0.914)
Min. Through Hole
0.156 ± 0.015
(3.96 ± 0.381)
Type “E”
Card Extender
0.200 ± 0.015
(5.08 ± 0.381)
0.100
(2.54)
0.050
(1.27)
15°
Typ.
120°
Typ.
Uses
Type “A”
Contact
0.086
(2.18)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
EB82-S0K2240W EB83-S0L1540X EB81-S0A1860Y EB83-S0C0640W EB81-S0D1540X EB81-S0E2540W EB83-
S0D1840V EB81-S0L1260W EB81-S0L0660W EB81-S0L0660X EB83-S0L1860X EB81-S0L1060W EB83-
S0D1040W EB83-S0K2260X EB83-S0E1840W EB81-S0C1060W EB83-S0K1860V EB85-P0A1830X EB83-
S0A2260X EB85-P0A1530X EB82-S0A1560X EB81-S0A1240X EB81-S0K1860X EB81-S0L0660X-B EB82-
S0A2240X EB85-P0A2430X EB82-S0A0640W EB82-S0L2260X EB85-P0A2530X EB85-P0A1230X EB82-
S0A1540X EB83-S0E1860W EB81-S0A2460V EB81-S0L1860W EB81-S0A2260Z EB83-S0C1560W EB83-
S0A1540Y EB81-S0D1860X EB81-S0K1560W EB85-P0E1830X EB81-S0K2240X EB82-S0A1860X EB85-
P0A1030X EB83-S0A2440X EB83-S0C1240X EB83-S0L2240X EB81-S0D1560X EB83-S0L2240W EB82-
S0A1840X EB82-S0A2540X EB85-P0E1030X EB81-S0K1040X EB83-S0A1240V EB81-S0A1540V EB83-
S0C1040X EB81-S0K0660W EB81-S0A0640V EB81-S0C1540W EB85-P0A2230X EB83-S0E2540W EB83-
S0A1560X EB83-S0A2560V EB85-P0E2230X EB83-S0A2240X EB83-S0A2240V EB81-S0A2240X EB81-
S0A2240Z EB83-S0C1540X EB82-S0C1060W EB83-S0D2540W EB81-S0A1040V EB83-S0A0640V EB81-
S0D2260X PK-8
