PointLED Enhanced Thinfilm LED Lead (Pb) Free Product RoHS Compliant LS P47F, LR P47F, LA P47F, LY P47F reverse mount top mount Released Besondere Merkmale * Gehausetyp: weies SMT Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: Montage von unten durch die Leiterplatte oder von oben moglich; ideal fur extrem flache Hinterleuchtungen * Wellenlange: 633 nm (super-red), 625 nm (rot), 617 nm (amber), 590 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP Dunnfilm * optischer Wirkungsgrad: 41 lm/W (super-red), 49 lm/W (red), 70 lm/W (amber), 43 lm/W (yellow) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 Features * package: white SMT package, colorless clear resin * feature of the device: top mount or reverse mount; ideal for extremely flat backlight * wavelength: 633 nm (super-red), 625 nm (red), 617 nm (amber), 590 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP Thinfilm * optical efficiency: 41 lm/W (super-red), 49 lm/W (red), 70 lm/W (amber), 43 lm/W (yellow) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 3000/reel, o180 mm or 12000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 9 Anwendungen * Einkopplung in Lichtleiter * Tastenhinterleuchtung * optischer Indikator * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung) * Innenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, u.a.) Applications * coupling into light guides * key pad illumination * optical indicators * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising) * interior automotive lighting (e.g. dashboard backlighting, etc.) 2012-03-16 1 LS P47F, LR P47F, LA P47F, LY P47F Bestellinformation Ordering Information Typ Emissionsfarbe Color of Emission Type Lichtstarke1) Seite 16 Lichtstrom2) Seite 16 Luminous Intensity1) page 16 Luminous Flux2) page 16 IF = 30 mA IV (mcd) IF = 30 mA V (mlm) Bestellnummer Ordering Code LS P47F-U1AA-1-1 super-red top mount 450 ... 1400 2780 (typ.) Q65110A7548 LS P47F-U1AA-1-1 super-red reverse mount 450 ... 1400 2780 (typ.) Q65110A4859 LR P47F-U2AB-1-1 red top mount 560 ... 1800 3540 (typ.) on request LR P47F-U2AB-1-1 red reverse mount 560 ... 1800 3540 (typ.) Q65110A4861 LA P47F-V2BB-24-3B5A amber reverse mount 900 ... 2800 5550 (typ.) Q65110A9267 LA P47F-V2BB-24-3A4B amber reverse mount 900 ... 2800 5550 (typ.) Q65110A4857 LY P47F-U2AB-36-4A5B yellow reverse mount 560 ... 1800 3540 (typ.) Q65110A9266 LY P47F-U2AB-36-3B5B yellow reverse mount 560 ... 1800 3540 (typ.) Q65110A4860 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LY P47F-U2AB-36-1 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen U2, V1, V2, AA oder AB enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LY P47F-U2AB-36-1 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, 4, 5 oder -6 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LS P47F-U2AB-36-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3A, -3B, -4A oder -4B enthalten (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LY P47F-U2AB-36-1 means that only one group U2, V1, V2, AA or AB will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LY P47F-U2AB-36-1 means that only 1 wavelength group -3, 4, 5 or -6 will be shippable (see page 5 for explanation). In order to ensure availability, single wavelength groups will not be orderable In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LS P47F-U2AB-36-1 means that only 1 forward voltage group -3A, -3B, -4A or -4B will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5 for explanation). 2012-03-16 2 LS P47F, LR P47F, LA P47F, LY P47F Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit LA, LR, LY LS, Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TS=25C) IF 50 mA Stotrom Surge current t = 10 s, D = 0.1, TS=25C IFM 100 mA Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TS=25C) VR 12 V 2012-03-16 3 LS P47F, LR P47F, LA P47F, LY P47F Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 30 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 30 mA Werte Values Einheit Unit LS LR LA LY peak 645 634 624 597 nm dom 633 6 625 5 617* -5/+7 590* -7/+5 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 30 mA (typ.) 15 16 18 18 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 120 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 30 mA (min.) (typ.) (max.) VF VF VF 1.80* 2.0 2.40 1.80* 2.0 2.40 1.80* 2.0 2.40 1.95* 2.05 2.55 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.2 10 0.2 10 0.2 10 0.2 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 30 mA; -10C T 100C (typ.) TCpeak 0.15 0.14 0.14 0.12 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 30 mA; -10C T 100C (typ.) TCdom 0.05 0.07 0.08 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 30 mA; -10C T 100C (typ.) TCV -2.5 -2.5 -2.5 -2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 30 mA (typ.) opt 41 49 70 43 lm/W (max.) Rth JA 420** K/W (max.) Rth JS 200** K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/solder point * Einzelgruppen siehe Seite 5 Individual groups on page 5 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2012-03-16 4 LS P47F, LR P47F, LA P47F, LY P47F Wellenlangengruppen (Dominantwellenlange)5)Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16 Gruppe Group amber min. max. 2 612 616 3 616 4 620 yellow Einheit Unit min. max. 620 583 586 624 586 589 nm 5 589 592 nm 6 592 595 nm nm nm Durchlassspannungsgruppen2) Seite 16 Forward Voltage Groups2) page 16 Gruppe Group amber, red, super red min. max. 3A 1.80 1.95 3B 1.95 4A 4B yellow Einheit Unit min max 2.10 1.95 2.10 V 2.10 2.25 2.10 2.25 V 2.25 2.40 2.25 2.40 V 5A 2.40 2.55 V 5B 2.55 2.70 V V Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group U1 U2 V1 V2 AA AB BA BB Anm.: Note: Lichtstarke1) Seite 16 Luminous Intensity1) page 16 IV (mcd) 450 ... 560 ... 710 ... 900 ... 1120 ... 1400 ... 1800 ... 2240 ... Lichtstrom2) Seite 16 Luminous Flux2) page 16 V (mlm) 560 710 900 1120 1400 1800 2240 2800 1500 (typ.) 1900 (typ.) 2400 (typ.) 3000 (typ.) 3700 (typ.) 4800 (typ.) 6050 (typ.) 7500 (typ.) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 5 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. The standard shipping format for serial types includes a family group of 5 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: V1-3-4A Example: V1-3-4A Helligkeitsgruppe Brightness Group Wellenlangengruppe Wavelength Group Durchlassspannung Forward Voltage V1 3 4A Anm.: Note: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. No packing unit / tape ever contains more than one group for each selection. 2012-03-16 5 LS P47F, LR P47F, LA P47F, LY P47F Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 30 mA OHL02731 100 rel % 80 V 60 yellow amber red super-red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 16 Radiation Characteristic2) page 16 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-03-16 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS P47F, LR P47F, LA P47F, LY P47F Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TS = 25 C Relative Lichtstarke 2) 7) Seite 16 Relative Luminous Intensity2) 7 page 16) IV/IV(30 mA) = f (IF); TS = 25 C IF OHL02812 10 1 OHL02665 10 2 mA IV IV (30 mA) 10 0 yellow amber, orange super red, red 10 1 5 10 -1 5 10 0 1.5 1.7 1.9 2.1 10 -2 0 10 2.3 V 2.5 5 10 1 Relative Lichtstarke2) Seite 16 Relative Luminous Intensity2) page 16 IV/IV(25 C) = f (Tj); IF = 30 mA IV IV (25 C) Relative Vorwartsspannung2) Seite 15 Relative Forward Voltage2) page 15 VF-VF(25 C) = f (Tj); IF = 30 mA 0.25 V mA 10 2 IF VF OHL02667 2.0 VF yellow 0.15 1.5 0.1 0.05 1.0 0 -0.05 super red amber red orange 0.5 -0.1 0 -60 -40 -20 0 -0.15 -0.2 -60 -40 -20 0 Tj 20 40 60 C 100 Tj 2012-03-16 20 40 60 C 7 LS P47F, LR P47F, LA P47F, LY P47F Maximal zulassiger Durchlassstrom Max. Permissible Forward Current IF = f (T) IF OHL02708 60 mA 50 TS 40 TA 30 20 10 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 C 100 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C OHL02706 0.12 IF A D= 0.10 0.10 0.005 0.01 0.02 0.05 0.1 0.2 0.08 0.5 to be defined OHL02707 0.12 IF A D= 0.005 0.01 0.02 0.05 0.1 0.2 0.08 to be defined 0.5 0.06 0.06 1 1 0.04 0.04 0.02 t D = TP tP 0.02 t IF D = TP T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 IF T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2012-03-16 tP tp 8 LS P47F, LR P47F, LA P47F, LY P47F Mazeichnung8) Seite 16 Package Outlines8) page 16 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Gewicht / Approx. weight: 2012-03-16 6 mg 9 LS P47F, LR P47F, LA P47F, LY P47F Empfohlenes Lotpaddesign8) Seite 16 Recommended Solder Pad8) page 16 Reflow Loten Reflow Soldering Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation 3.6 (0.142) 0.025 (0.001) 0.7 (0.028) 2.6 (0.102) (o2.1 (0.083) +0.1 (0.004) ) (0.5 (0.020)) Bauteil positioniert, Ruckseite Component location on pad, backside Hole in PCB Lotstoplack Solder resist 2012-03-16 OHAY1307 10 LS P47F, LR P47F, LA P47F, LY P47F Method of Taping / Polarity and Orientation8) page 16 top mount Packing unit 3000/reel, o180 mm or 12000/reel, o330 mm 0.8 (0.031) 0.05 (0.002) 5 max. (1.4 (0.055)) 3.7 (0.146) 0.05 (0.002) 0.3 (0.012) max. 8.1 (0.319) 0.1 (0.004) 2 (0.079) 0.05 (0.002) 2.7 (0.106) 0.05 (0.002) 1.5 (0.059) +0.1 (0.004) 4 (0.157) 1.1 (0.043) 0.05 (0.002) Cathode/Collector Side 3.5 (0.138) 0.05 (0.002) Verpackungseinheit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm 1.75 (0.069) 0.05 (0.002) Gurtung / Polaritat und Lage8) Seite 16 Montage von oben 0.95 (0.037) 0.05 (0.002) 2.25 (0.089) 0.05 (0.002) OHAY2511 Packing unit 3000/reel, o180 mm or 12000/reel, o330 mm 3.75 (0.148) 0.05 (0.002) 0.3 (0.012) max. 5 max. 2 (0.079) 0.05 (0.002) 8.1 (0.319) 0.1 (0.004) 1.5 (0.059) +0.1 (0.004) 4 (0.157) 1.1 (0.043) 0.05 (0.002) Cathode/Collector Side 3.5 (0.138) 0.05 (0.002) Method of Taping / Polarity and Orientation8) page 16 reverse mount 2.8 (0.110) 0.05 (0.002) Verpackungseinheit 3000/Rolle, o180 mm oder 12000/Rolle, o330 mm 1.75 (0.069) 0.05 (0.002) Gurtung / Polaritat und Lage8) Seite 16 Montage von unten 0.8 (0.031) 0.05 (0.002) 0.45 (0.018) 0.05 (0.002) 1.5 (0.059) 0.05 (0.002) 0.95 (0.037) 0.05 (0.002) OHAY2512 2012-03-16 11 LS P47F, LR P47F, LA P47F, LY P47F Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Pb-Free (SnAgCu) Assembly Profile Feature Recommendation Max. Ratings Ramp-up Rate to Preheat*) 25C to 150C 2C / sec 3C / sec Time ts from TSmin to TSmax (150C to 200C 100s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2C / sec 3C / sec Liquidus Temperture TL 217C Time tL above TL 80sec max. 100sec Peak Temperature TP 245C max. 260C Time tP within 5C of the specified peak temperature TP - 5K 20sec min. 10sec max. 30sec Ramp-down Rate* TP to 100C 3K / sec 6K / sec maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2012-03-16 12 LS P47F, LR P47F, LA P47F, LY P47F Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2012-03-16 13 LS P47F, LR P47F, LA P47F, LY P47F Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE LE l k, If see labe code blan bar ). (RH idity hum e 60% tive d C/ kag rela are 30 E S s _ infr pac < OR of rs 90% to ak tainITIV CT < rs ns ed (pe or e). rs con NS Hou SE DU rs Hou and ject C, cod ditio 72 sing Hou 5 e bag E ON C sub 48 e Hou con s UR ces 24 6 dat e MIC 40 be tim C ThiISTSE pro < tory tim e e . or with 23 tim at t will or fac entC) . MO Flo al s tim TO at or at Flo d tha or ival el ure nth ntic OP Flo 4 if: rea Flo , lab ow mo ices ide ced 5 equ el n e 5a is ing el bel 24 dev or pro 6 Lev e : el e cod , unt whe Lev el re ow, see bag Lev l dat mo re bak e bar ned Lev refl 10% istu re led tim for sea ore> re ope e see Mo istu 3 istu is or . sea is has Mo bef nk, istu d nk, Flo -03 Mo in RH bla Mo or-p bla in bag ing, Car TD r life (if If with t. r lf 10%bak or J-S thisvapp. Yea eks rs _ r < ed 1 icat med, C Yea tem She ow, at uire not > y 1 WeHou unt DE Afte Ind e 4 uire refl is red req bod Mo e /JE tim 168 req : idity 2b a) tim Sto ices or is IPC or time e ned b) Hum ing ce Flo oror tim e Dev 2a Flo ope a) 3. b) bak ren Flo or e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev el and Lev el re Bag e Lev re Lev istu re Dat istu re Mo Mo istu istu Mo Mo U A C 1. . RH Barcode label N O TI 2. M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label MY DE 8 R1 -1 Q 44 : 01 99 8 D/C 21 00 (9D ) 21 : 20 00 (Q )Q TY : SR m A ic M on du O pt ct or o NO s H O H1 23 4 Se TC BA 3G ) (6P T LO ) (1T NO : OD PR (X) MY DE -1 Q P1+ GR OU P: (G ) ul LS ti Y TO T6 PL 76 99 8 D/C : 01 21 (9D ) 00 AM )Q O SR A 21 00 R ic NO : m 23 4 (Q 5 O S H1 BA TC H 3G : 12 (X) PR OD NO : (1T ) 11 00 LO T 14 2 NO (6P ) Se TY : 20 on M du O ct pto or s 44 M R1 8 ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster 5 NO : 12 _ < urs e). Ho urs urs Ho cod 72 Ho urs te 48 e Ho 24 6 da tim e e h tim or wit 23 tim e at t wilnt or fac C . Flo al tim s at or ale at Flo d or ure el nth s tha ntic Flo uiv if: rea l 4 5 Flo , lab mo ice eq ide ced low ve l 5a is de be 24 dev, or tingen pro 6 Le ve te co g: un wh vel Le ke r re see da ba ed, low ba Le vel re mo % ba e al Le istu en ref e 10 re led tim se for re op for > Mo istu see 3 istu ase is or . sea is Mo nk, be istu nk, Flo rd g ph -03 Mo in RH g, bla Mo ba orCa bla hin % TD kin t. life (if ar If wit s vapp. 10 ba tor J-S this elf Ye ar ek , _ < e icat me , C 1 urs Ye tem ted er Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red req 2. bo ity is Mo /JE tim e e 16 req : 2b a) Sto es tim or mid IPC ed or g is tim e vic b) e Hu Flo oror en tim De 2a kin nc te Flo a) op or 3. b) baere Flo da e 1 l Flo If 2 ref tim vel 4. 2a sea d 3 Le vel g an vel Le re Ba te Le vel re Le istu Da re re Mo istu Mo istu istu Mo Mo 14 2 . RH % /60 C ge P1+ T6 PL 76 ). (RH dity mi d OU P: M ul LS ti Y TO l see labe k, e cod blan bar hu arecka rel 30 N RS infr pa % ins VE of to ak ITI TO 90 s nta < NSUC or TIO ted (pe d ion g jec U g EcoSEND an dit C, sin 5 C sub CO Ais ba con ces UR y MI 40 be CThIST C l pro < tor SE ). 11 00 If e ativ GR L VE LE (G ) Muster ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Lange / length Hohe / height 200 5 (7,874 0,1968) Breite / Width 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 352 5 (13,858 0,1968) 352 5 (13,858 0,1968) 33 5 (1,3 0,1968) 2012-03-16 14 OHA02044 LS P47F, LR P47F, LA P47F, LY P47F Revision History: 2012-03-16 Previous Version: 2010-11-24 Page Subjects (major changes since last revision) Date of change 9 acc. to OS-IN-2005-025 2005-11-15 2 ordering code 2005-12-12 7 relative luminous intensity 2006-01-23 9 acc. to OS-IN-2008-003 2009-01-15 1, 9 additional information 2009-12-07 10 correction of solder pad drawing 2010-02-05 2, 5 update of Q-numbers 2010-03-17 13 OS-IN-2010-032 2010-10-04 14 package outlines updated 2010-11-24 all final datasheet created 2010-11-24 12 OS-IN-2012-005 2012-03-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 16may only be used in life-support devices or systems11) page 16 with the express written approval of OSRAM OS. 2012-03-16 15 LS P47F, LR P47F, LA P47F, LY P47F Remarks: Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur red Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus nach CECC 00802 Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for red 4) 5) 6) 7) 8) 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2012-03-16 1) 16 Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.