F-219 (Rev 16APR19) FTSH-150-02-L-D FTSH-115-03-L-D-RA 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES FTSH-125-01-F-D (1.27 mm) .050" FTSH SERIES THROUGH-HOLE MICRO HEADER Impedance matched for high-speed applications (Mated with CLP Series) Board Mates: CLP, FLE SPECIFICATIONS For complete specifications see www.samtec.com?FTSH Cable Mates: FFSD, FFTP Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (FTSH/CLP): 3.4 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes (2.51 mm) .099" Mates with socket strips or IDC cable PROCESSING Lead-Free Solderable: Yes For complete scope of recognitions see www.samtec.com/quality FTSH FILE NO. E111594 LOCKING CLIP FFSD For single STRIP ASSEMBLY LOCKING mating CLIP cycle with the PC FFSD. BOARD Specify -LC after tail option. Lead Style -01 and 10 pins/row minimum. 5-9 pins/row not available in combination with keying shroud (-K). 1 NO. PINS PER ROW 02 LEAD STYLE Specify LEAD STYLE from chart 02 thru 50 (1.27) .050 01 PLATING OPTION No. of positions x (1.27) .050 ALSO AVAILABLE (3.43) .135 (2.51) .099 - 02 - 03 - 04 - EP - EL = Rightangle (15.77) .621 (5.87) .231 (6.53) .257 -EP = End Shroud with Guide Post (Style -02 & -03) 9 pins/row min. -EJ -EL = Ejector Shroud (Style -01 only) 10 pins/row min. 25 pins/row max. -RA not available -EP (11.18) .440 -RA -K (1.27) .050 (2.29) .090 -EJ (2.29) .090 -ES -RA -ES Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -ES = End Shroud (Style -02 & -03) 9 pins/row min. = End Shroud with Board Lock (Style -02 & -03) 9 pins/row min. (3.20) .126 -K OTHER OPTIONS -EL (1.91) .075 DIA (3.05) .120 (2.16) .085 (5.08) OPTION Z A MATES .200 WITH (1.55) - ES (3.05) FFSD .061 - EJ -RA -"XXX" (2.29) .090 (1.27) .050 (1.27) .050 Some sizes, styles and options are non-standard, non-returnable. (0.40) .016 SQ 99 .120 (1.91) FLE .075 (1.65) CLP-D .065 (3.81) N/A .150 = Polarized Position (Specify position of omitted pin) (Not available with -EX options) (2.29) .090 A - 01 -L Leave blank for straight tail 100 (MOQ Required) LEAD STYLE -F Leave blank for RIght-angle (1.17) .046 99 (3.43) .135 01 TAIL OPTION OPTION = 10 " (0.25 m) Gold on post, Matte Tin on tail 100 -EX OPTION SHOWN D = Gold flash on post, Matte Tin on tail No. of positions x (1.27) .050 + Z (4.78) .188 02 Notes: See SFM/TFM for positive alignment feature. Optional end shrouds and ejector shrouds Through-hole, right-angle or surface mount RECOGNITIONS * Molded Pick & Place pads * Other platings (1.27 mm) .050" micro pitch All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (1.27) .050 = Keying Shroud for mating with FFSD (Style -01 only, 05, 08, 10, 13, 15, 17, 20 & 25 pins/row only and 13, 17, 20 & 25 only with -EJ option)