High Temperature Grease Product Code: HTG TECHNICAL DATA SHEET PRODUCT DESCRIPTION This specialised high temperature grease, supplied in tubes, is for use in many mechanical and electrical applications. PRODUCT USE HTG is suitable for use in many applications where good lubrication and consistent performance at elevated temperatures is required. Examples of this are photocopier drive systems, laser printer and thermal printer gears etc. and heavy industrial machinery which runs continuously. Lubricating the chains on reflow and flow soldering machines are another suitable application. FEATURES * * * * * * * Wide operating temperature range. Excellent lubricating and thermal properties. Safe on most thermoplastics. Contains good anti-rust and anti-wear additives. Water resistant Low evaporation weight loss Conveniently packed in 50ml tubes. TYPICAL PROPERTIES Form: Viscosity (Base Oil, 40C): Flash Point: Pour Point: Drop Point: Temperature Range: Thermal Conductivity Brown Grease 465 cSt 230C <-10C >250C -20C to +200C 0.4W/mK Dielectric strength 35kV/mm DIRECTIONS FOR USE Apply to both surfaces sparingly. Copyright Electrolube 2003 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082 High Temperature Grease - Page 2 PACKAGING 50ml Tube ORDER CODE TECHNICAL DATA SHEET HTG50T Copyright Electrolube 2003 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE, A division of H K Wentworth, Kingsbury Park, Midland Road, Swadlincote, Derbyshire, DE11 0AN Tel: +44(0) 1283-222111 Fax: +44(0) 1283-550177 www.electrolube.com ISO 9002 Registered Firm. Certificate No. FM 32082