3 ST* Connectors and Accessories 1 The 3MTM ST* Connector product line provides high repeatability and low light loss for premises, LAN and telco applications. The improved connector design is compatible with the AT&T ST* connector product line as well as Systimax* components and other ST* connector products. The 3M products are supplied with a high quality PC finish on zirconia ceramic ferrules. 3 CrimplokTM ST* Connector, Bayonet Multimode/Single-mode 2 Hot Melt ST* Connector, Bayonet Multimode/Single-mode The 3MTM Hot Melt ST* Fiber Optic Connector is a keyed bayonet-style multimode/single-mode connector, which incorporates 3M's hot melt adhesive and pre-radiused PC zirconia ceramic ferrule technologies. The result is a quick mount fiber optic connector that delivers low light loss, solid intermateability and mechanical stability, while costing less to install. ST* Hot Melt Bayonet Connector for Multimode/Single-mode Features Benefits Pre-loaded Hot Melt adhesive No epoxy to mix; no syringe needed; shorter set-up time; fewer consumables; no shelf life; no mess; no waste The 3MTM CrimplokTM ST* Connector multimode/singlemode connector combines the speed of non-adhesive connectors with the performance characteristics of epoxy and hot melt connectors. Crimplok connectors are the ideal solution for emergency restoration work or for quickly making fiber connections at the desk. Their time-saving features are also valuable in larger network applications where average installation time is less than 2 minutes per connector. Crimplok connectors are faster to install than epoxy connectors since there is no set-up or curing time. And Crimplok connectors do not require special heating tools or ovens, so time spent searching for electrical outlets is eliminated. The Crimplok connector is ideal for fiber-tothe-desk and other applications where a few connectors are installed at a time. Crimplok ST* Connectors Features Benefits Non-adhesive design Clean and simple terminations Short heat and cool cycle; saves time No set-up required Saves time and money No electricity required Installation anywhere Unlimited adhesive shelf life Eliminates outdated epoxy inventory and stock rotation requirements Meets TIA-568 specifications Rugged, reliable performance No crimping required Fewer tools; saves time Pre-radiused PC ferrule Assured contact of fibers; consistent performance Fast cure time Zirconia ceramic ferrule Re-usable Connector Durability; stability through temperature change; quality performance Ability to reterminate with same connector; saves time and money 6 5 2 7 1 4 3 ST* Connector 1. Dust cap 2. Ferrule 3. Backbone 4. BAYONET 5. Spring 6. C-Ring 7. Boot ST* Connector, Epoxy Bayonet Multimode/ Single-mode The Epoxy ST* Connector is bayonet style for quick interconnect and high repeatability. ST* Epoxy Bayonet Connector for Multimode/Single-mode Features Benefits Bayonet design Quick interconnect Keyed connector Assures high repeatability Pre-radiused PC ferrule Assures contact of fibers; low reflection, consistent performance Zirconia ceramic ferrule Durability; stability through temperature change; quality performance 4 Specifications for ST* Bayonet Connectors Hot Melt Bayonet Multimode Single-mode Product number Connector type Fiber size m 6100 Hot Melt Crimplok Multimode Single-mode 8100YS 6901 8901 Hot Melt Crimplok Crimplok 6105 8106 Epoxy Epoxy 125 126 125 0.2 typical (62.5/125 m fiber) <0.2 typical Reflection (dB) field mount <-25 typical -30 typical <-25 typical -40 typical -25 typical -45 typical Connector durability (dB) 500 matings <0.2 change <0.2 change <0.3 change <0.3 change <0.2 change/ 1000 matings <0.2 change Operating temperature -40 to 60C (-40 to 140F) -40 to 60C (-40 to 140F) -10 to 60C (-14 to 140F) -10 to 60C (-14 to 140F) -40 to 80C (-40 to 176F) -40 to 80C (-40 to 176F) Storage temperature -40 to 85C (-40 to 185F) -40 to 85C (-40 to 185F) -40 to 85C (-40 to 185F) -40 to 85C (-40 to 185F) -40 to 85C (-40 to 185F) -40 to 85C (-40 to 185F) Zirconia ceramic Nickle plated zinc Zirconia ceramic Nickle plated zinc Material Connector ferrule Connector housing Boot Flame retardancy Identification Field Termination Kit 120V 230V Zirconia ceramic Nickle plated zinc Zirconia ceramic Nickle plated zinc Thermoplastic elastomer Thermoplastic elastomer <0.2 typical (62.5/125 m fiber) Zirconia ceramic Zirconia ceramic Thermoplastic polymer Thermoplastic polymer 125 8107 <0.2 typical (62.5/125 m fiber) Attenuation (dB) @ 1300 nm field mount 126 Epoxy Bayonet Multimode Single-mode <0.2 typical (62.5/125 m fiber) Thermoplastic elastomer Thermoplastic elastomer Thermoplastic elastomer 127 0.3 typical (62.5/125 m fiber) Thermoplastic elastomer UL-94 V-0 UL-94 V-0 UL-94 V-0 UL-94 V-0 Blue dot on end of ferrule, white boot Blue dot on end of ferrule, yellow boot Black body beige shell grey boot Black body beige shell blue boot Black backbone Silver backbone 6355 HM 6351 HM 6355 HM 6351 HM 6955 (no power needed) 8365 8361 8365 8361 6955 UL-94 V-0 126 UL-94 V-0 Connector Accessories Couplings 3M Couplings are compatible with Hot Melt, Bayonet, and CrimplokTM connectors and cable assemblies from 3M, as well as other major ST* connector vendors. These singlemode and multimode couplings are available in threaded or simplex housings, and a duplex coupling with 0.5" industry standard spacing. The duplex threaded coupling is mounted on the panel with a single nut and provides high density capability. 5 Specifications for ST* Couplings Multimode Product Number Description Operating temperature Material Housing Sleeve 6112 Threaded Coupling Single-mode 6113 Duplex Threaded Coupling -40 to 85C (-40 to 185F) 8113 8119 Duplex Threaded Coupling Threaded Coupling -40 to 85C (-40 to 185F) Nickel plated zinc Beryllium copper Nickel plated zinc Zirconia ceramic One-Step Polishing Machine The 6850 One-Step Polishing Machine features a dry, single-paper technology for polishing the ferrule of a single Hot Melt Connector. It is a 12-volt DC unit that provides hands-free operation and delivers consistent performance. Because no wet paper is used, no water is necessary and no clean up is required. 3M also offers connector termination kits utilizing the one-step polishing procedure for a variety of Hot Melt Connectors. The 6355 and 6351 Termination Kits contain all materials necessary to terminate Hot Melt Bayonet Connectors (compatible with the ST* Connector). The 3M polishing machine includes the polishing unit, 110-volt AC to 12-volt DC converter, and 100 sheets of polishing film. There are also adapters to polish FC and SC connectors. 6 Specifications for One-Step Polishing Machine Size H x W x D cm (in.) Weight kg (lbs.) 13.2 x 19.1 x 12.7 (5.2 x 7.5 x 5.0) Net: 2.2 (4.9) Shipping: 3.2 (7.0) Ordering Information Product Name Multimode Connectors 6100-W Hot Melt Bayonet ST* Connector MM, 125 um, white boot 6100-R Hot Melt Bayonet ST* Connector MM, red boot 6100-B Hot Melt Bayonet ST* Connector MM, black boot 6105-B Bayonet ST* Connector MM, 125 um Epoxy, black boot 6901 CrimplokTM MM ST* Connector 6100-W5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, white boot 6100-R5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, red boot 6100-B5-12 Hot Melt Bayonet ST* Connector MM Bulk, 125 um, black boot 6100-W1K Hot Melt Bayonet ST* Connector MM, 125 um, white boot, 1,000 Bulk 6100-R1K Hot Melt Bayonet ST* Connector MM, 125 um, red boot, 1,000 Bulk 6100-B1K Hot Melt Bayonet ST* Connector MM, 125 um, black boot, 1,000 Bulk 6105-R Bayonet ST* Connector MM, 125 um Epoxy, red boot 6105-B1K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 1,000 Bulk 6105-R1K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 1,000 Bulk 6105-B10K Bayonet ST* Connector MM, 125 um Epoxy, black boot, 10,000 Bulk 6105-R10K Bayonet ST* Connector MM, 125 um Epoxy, red boot, 10,000 Bulk Multimode Couplings 6112 ST* Coupling MM, Threaded 6113 ST* Coupling MM Duplex, Threaded 6112-1K ST* Coupling MM Threaded 1,000 Bulk Single-mode Connectors 8100YS Hot Melt Bayonet ST* Connector SM 8106 ST* Bayonet Connector SM 126 m, epoxy 8107 ST* Bayonet Connector SM 127 m, epoxy 8901 CrimplokTM SM ST* Connector 8106-Y1K ST* Bayonet Connector SM 126 um, Epoxy 1,000 Bulk Single-mode Couplings 8113 Coupling SM Duplex, Threaded 8119 Coupling SM, Threaded Accessories 6192-A One Step Hot Melt Polishing Film (50 sheets/pkg.) 6192-B Polishing Film for 6850 One Step Polishing Machine 08-00882 Metal polishing jig available separate from kits 6192-AA Single-mode Hot Melt Polishing Film (.05m) (50 sheets/pkg.) SM Lapping film for Crimplok, 80-6110-1312-1 (50 sheets/pkg.) One Step Crimplok Polishing Film, 80-6108-4532-5 (50 sheets/pkg.) ST-B ST* Boot Bulk Pack, Black ST-R ST* Boot Bulk Pack, Red ST-U ST* Boot Bulk Pack, Blue Polishing Machines/Portable Heaters 6850-A Polishing Machine with 110V converter, one step Terminating Kits 6355 HM Hot Melt Termination Kit 120V for all Hot Melt Connectors 6351 HM Hot Melt Termination Kit 230V for all Hot Melt Connectors 6955 Universal Crimplok Termination Kit for all Crimplok Connectors 8361 ST*/FC/SC Universal Kit 230V (epoxy) for ST* Bayonet, SC and FC style connectors 8365 ST*/FC/SC Universal Kit 120V (epoxy) for ST* Bayonet, SC and FC style connectors Shipping Unit 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 60/cs. 1 each 1 each 1 pkg. 1 pkg. (50 sheets/pkg.) 1 each 1 pkg. 1 pkg. 1 pkg. 500/cs 500/cs 500/cs 1/cs. 1 1 1 1 1 kit kit kit kit kit * ST is a registered trademark of AT&T. * Systimax is a registered trademark of AT&T. * Estane is a registered trademark of Goodyear. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Telecom Systems Division 6801 River Place Blvd. Austin, TX 78726-9000 800/426 8688 FAX 800/626 0329 www.3M.com/telecom Recycled Paper 50% pre-consumer 10% post-consumer Litho in USA. (c) 3M IPC 2000 80-6111-6023-7 (1102.5)DC/TG-1