3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: KAA-3528SURKCGKCT Hyper Red Green Features Description z Both chips can be controlled separately. The Hyper Red source color devices are made with Al- z Suitable for all SMT assembly and solder process. GaInP on GaAs substrate Light Emitting Diode. z Available on tape and reel. The Green source color devices are made with AlGaInP on z Package: 1500pcs / reel. GaAs substrate Light Emitting Diode. z Moisture sensitivity level : level 4. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ7762 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: AUG/03/2010 DRAWN: Y.H.Wu PAGE: 1 OF 6 ERP: 1201004058 Selection Guide Part No. Dice KAA-3528SURKCGKCT Lens Type Hyper Red (AlGaInP) WATER CLEAR Green (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 200 320 40 80 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Green 630 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ7762 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: AUG/03/2010 DRAWN: Y.H.Wu PAGE: 2 OF 6 ERP: 1201004058 KAA-3528SURKCGKCT Hyper Red SPEC NO: DSAJ7762 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: AUG/03/2010 DRAWN: Y.H.Wu PAGE: 3 OF 6 ERP: 1201004058 Green SPEC NO: DSAJ7762 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: AUG/03/2010 DRAWN: Y.H.Wu PAGE: 4 OF 6 ERP: 1201004058 KAA-3528SURKCGKCT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ7762 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: AUG/03/2010 DRAWN: Y.H.Wu PAGE: 5 OF 6 ERP: 1201004058 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAJ7762 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu KAA-3528SURKCGKCT DATE: AUG/03/2010 DRAWN: Y.H.Wu PAGE: 6 OF 6 ERP: 1201004058