OM1905NMM OM1915NMM OM1912NMM HERMETIC SURFACE MOUNT FIXED VOLTAGE NEGATIVE REGULATORS APPROVED TO DESC DRAWINGS Three Terminal, Fixed Voltage, 1.5 Amp Precision Negative Regulators In Hermetic Surface Mount Package FEATURES * * * * * * Hermetic Surface Mount Package Output Voltages: -5V, -12V, -15V Output Voltages Set Internally To 1% Built-In Thermal Overload Protection Short Circuit Current Limiting Product Is Available Hi-Rel Screened DESCRIPTION These three terminal negative regulators are supplied in a hermetically sealed surface mount package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 1.5 amps of output current. These units feature internally trimmed output voltages to 1% of nominal voltage. Standard voltages are -5V, -12V, and -15V. These units are ideally suited for Military applications where a hermetic surface mount package is required. PART NUMBER DESIGNATOR Standard Military Drawing Number 5962-8874601 NX 5962-8874701 NX 5962-8874801 NX Omnirel Part Number OM1905NMM OM1912NMM OM1915NMM 3.5 4 11 R0 3.5 - 53 OM1905NMM - OM1915NMM ABSOLUTE MAXIMUM RATINGS @ 25C Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -35 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . .- 55C to + 150C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to + 150C Typical Power/Thermal Charateristics: Rated Power @ 25 C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15W TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3W Thermal Resistance JC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5C/W aa JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120C/W ELECTRICAL CHARACTERISTICS -5 Volt VIN = -10V, Io = 500mA, -55C TA 125C (unless otherwise specified) Parameter Symbol Test Conditions Min. Max. Unit Output Voltage VOUT TA = 25C -4.95 -5.05 V -4.85 -5.15 V 12 mV 25 mV VIN = -7.5V to -20V * IO = 5mA to 1.0 A, P < 15W Line Regulation VRLINE VIN = -7.5V to -20V * (Note 1) VIN = -8.0V to -12V (Note 4) Load Regulation VRLOAD 5 mV * 12 mV 20 mV * 25 mV 15 mV 30 mV 2.5 mA 3.0 mA VIN = -7.0V to -20V * * 0.4 mA IO = 5mA to 1000mA * 0.4 mA * IO = 5mA to 1.5 Amp (Note 1) IO = 250mA to 750 mA * Standby Current Drain ISCD Standby Current Drain ISCD Change With Line (Line) Standby Current Drain ISCD Change With Load (Load) Dropout Voltage VDO VOUT = 100mV, IO = 1.0A Peak Output Current IO (pk) TA = 25C Short Circuit Current IDS VIN = -35V 1.5 * (Note 2) 2.5 V 3.3 A 1.2 A 2.8 A VIN f =120 Hz, VIN = -10V VOUT (Note 3) NO TA = 25C, f =10 Hz to 100KHz 40 Long Term Stability VOUT TA = 25C, t = 1000 hrs. 75 (Note 3) t Ripple Rejection Output Noise Voltage 63 * dB 60 dB (Note 3) 3.5 V/V RMS mV Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. Short Circuit protection is only assured up to VIN = -35V. 3. If not tested, shall be guaranteed to the specified limits. The * denotes the specifications which apply over the full operating temperature range. 3.5 - 54 OM1905NMM - OM1915NMM ELECTRICAL CHARACTERISTICS -12 Volt VIN = -19V, Io = 500mA, -55C TA 125C (unless otherwise specified) Parameter Symbol Test Conditions Min. Max. Unit Output Voltage VOUT TA = 25C -11.88 -12.12 V -11.64 -12.36 V VIN = -14.5V to -27V * IO = 5mA to 1.0 A, P < 15W Line Regulation VIN = -14.5V to -27V VRLINE (Note 1) 20 mV * 50 mV 10 mV * 30 mV 32 mV VIN = -16V to -22V (Note 4) Load Regulation IO = 5mA to 1.5 Amp VRLOAD * (Note 1) IO = 250mA to 750 mA * Standby Current Drain ISCD Change With Line (Line) Standby Current Drain ISCD Change With Load (Load) mV 30 mV mA 4.0 mA VIN = -14.5V to -27V * * 0.8 mA IO = 5mA to 1000mA * 0.5 mA * 1.8 V Dropout Voltage VDO VOUT = 100mV, IO = 1.0A Peak Output Current IO (pk) TA = 25C, IO = 5mA to 1A Short Circuit Current IDS VIN = -35V VIN f =120 Hz, VIN = -10V 1.5 * (Note 2) Ripple Rejection mV 16 3.5 ISCD Standby Current Drain 60 3.3 A 1.2 A 2.8 56 VOUT (Note 3) NO TA = 25C, f =10 Hz to 100KHz 40 Long Term Stability VOUT TA = 25C, t = 1000 hrs. 120 (Note 3) t Output Noise Voltage * A dB 53 dB (Note 3) V/V RMS mV Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. Short Circuit protection is only assured up to VIN = -35V. 3. If not tested, shall be guaranteed to the specified limits. The * denotes the specifications which apply over the full operating temperature range. 4. Minimum load current for full line regulation = 5 mA. CONNECTION DIAGRAM MECHANICAL OUTLINE .140 .140 .140 .015 .075 .157 .075 1 2 .415 3 .062 .375 .030 MIN. 3.5 - 55 Pin 1 Ground Pin 2 Output Pin 3 Input 3.5 OM1905NMM - OM1915NMM ELECTRICAL CHARACTERISTICS -15 Volt VIN = -23V, Io = 500mA, -55C TA 125C (unless otherwise specified) Parameter Symbol Test Conditions Min. Max. Unit Output Voltage VOUT TA = 25C -14.85 -15.15 V -14.55 -15.45 V * VIN = -17.5V to -30V IO = 5mA to 1.0 A, P < 15W Line Regulation VIN = -17.5V to -30V VRLINE * (Note 1) VIN = -20V to -26V (Note 4) * Load Regulation IO = 5mA to 1.5 Amp VRLOAD * (Note 1) IO = 250mA to 750 mA * Standby Current Drain ISCD Change With Line (Line) Standby Current Drain ISCD Change With Load (Load) mV mV 15 mV 25 mV 35 mV 75 mV 21 mV 45 mV 6.0 mA 6.5 mA VIN = -17.5V to -30V * * 0.8 mA IO = 5mA to 1000 mA * 0.5 mA * ISCD Standby Current Drain 25 50 Dropout Voltage VDO VOUT = 100mV, IO = 1.0A Peak Output Current IO (pk) TA = 25C Short Circuit Current IDS VIN = -35V 1.5 * (Note 2) 2.5 V 3.3 A 1.2 A 2.8 A VIN f =120 Hz, VIN = -10V VOUT (Note 3) NO TA = 25C, f =10 Hz to 100KHz 40 Long Term Stability VOUT TA = 25C, t = 1000 hrs. 150 (Note 3) t Ripple Rejection Output Noise Voltage 53 * dB 50 dB V/V (Note 3) RMS mV Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. Short Circuit protection is only assured up to VIN = -35V. 3. If not tested, shall be guaranteed to the specified limits. The * denotes the specifications which apply over the full operating temperature range. TYPICAL PERFORMANCE CHARACTERISTICS PEAK OUTPUT RIPPLE REJECTION DROPOUT VOLTAGE 3.5 2.5 100 2 2 Tj = 25C 1.5 1 Tj = 150C 0.5 5 10 15 1.5 IOUT = 500mA 1 IOUT = 0A 0.5 20 25 30 35 0 -75-50 -25 0 VOUT = 5V 60 40 VIN - V = 8VDC +3.5Vrms IOUT = 1A Tj = 25C 20 VOUT = 100MV VOUT = 100mV 0 80 IOUT = 1A Ripple Rejection (dB) Tj = -55C 2.5 Output Current (A) 3.5 Output Current (A) 3 2 5 5 0 7 5 100 125150 0 10 Input To Output Differential (V) Junction Temperature (C) 100 1k 10k Frequency (Hz)