LIGHTLINE
AC/DC-Converter
with 3 year Warranty
RACD03
3 Watt
Single
Output
●3W Class II AC-DC LED Power Supply
●350mA to 700mA CC/CV Output
●ENEC, RCM and EAC Certified
●UL1310/8750, EN61347 Certified
●Universal Input Voltage Range
●Fused Input and Protected Output
●3kVAC Isolation
●IP66
●Low Cost
Features
LED Driver
Selection Guide
Part CV Mode CC Mode Efficiency typ.
Number (VDC) (mA) (VDC) (mA) (%)
RACD03-350 15 0-350 2.5-15 350 72
RACD03-500 11 0-500 2.5-11 500 71
RACD03-700 6 0-700 2.5-6 700 62
Input Voltage Range 90-264VAC or 120-370VDC
Rated Power 3W nom. / 5.5W max.
Input Frequency Range 47-63 Hz
Output Voltage Range 2.5 - 15VDC max.
Inrush Current (<2mS) 230VAC 10A max.
Leakage Current 240VAC/50Hz 0.2mA typ.
Input Fuse Built-in T1A
Input Current 130mA max.
Output Current Accuracy (combined Tolerance, Load Regulation and Line Regulation) ±10%
Minimum Load Open Circuit Protected 1 LED
Output Ripple 0.1Ap-p max.
Hold Up Time 18ms min.
Operating Frequency 66kHz typ.
AC RMS Isolation Voltage I/P to O/P 3.75kV / 1 minute
Temperature Coefficient ±0.02%/°C typ.
Overload Protection 120% typ.
Short Circuit Protection Continuous Current Limit
Output Overvoltage Protection Zener Diode Clamp
Overtemperature Protection Shutdown, Automatic restart after cooling down
Operating Temperature Range Ambient Temperature -20°C to +50°C
(free air convection, according to CE/UL) Case Temperature 75°C max.
Operating Temperature Range Ambient Temperature -20°C to +40°C
(free air convection, according to ENEC) Case Temperature 75°C max.
Storage Temperature Range -25°C to +85°C
Humidity 95% RH max.
IP Rating IP66
PCB Material Plastic Resin with Fibreglass (UL94V-0)
Case Material Plastic
Weight 45g
continued on next page
Description
Specifications (typical at 25°C and after warm up time unless otherwise specified )
A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs.
The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower
output currents, the output is constant voltage. Connections are via 215mm long flying leads.
UL8750 certified
UL1310 certified
EN61347 certified
IEC/EN61347-2-13 certified
IEC/EN62384-1
EAC; ENEC
RoHS
2011/65/EU
6/6
www.recom-power.com L-19REV: 2/2017
E340696
RACD03
Output Current
Output Voltage
15V
350mA
RACD03-350
Nominal Current Limits
6V
3V
CV
CC
11V
500mA
700mA
RACD03-500
RACD03-700
CC
CC
CV
CV
4.0
5.0
1
2
3
4
PRI
SEC
t
c
38.1
23.1
6±1
10±1
29.6
215
+10
-20
215
+10
-20
FC 46.1
52.1
1.3±0.1
Ø3.0
RACD03
Series
LIGHTLINE
AC/DC-Converter
Package Style and Pinning
Wire Connections
Wire Function
(1) blue VAC in (N)
(2) brown VAC in (L)
(3) black LED-
(4) red LED+
Tolerance
XX = +1mm/ -0.5mm
XX.X = +/- 0.25mm
Packing Quantity 10pc
Certifications Standard for LED Equipment for use in Lighting Products UL8750, 1st Edition 2009
Standard for Class 2 Power Units UL1310, 6th Edition 2011
Extra Low Voltage Class 2 Outputs CSA C22.2 No. 223-M91
Lamp Controlgear General Requirments for Safety (ENEC) EN 61347-1, 2008+A1:2011+A2:2013
Power Supply or Charger for lighting purposes electronic type (RCM) AS/NZS 61347.1:2002 + IEC61347-2-13, 1st Edition
Lamp Controlgear Particular Requirements (ENEC) EN 61347-2-13: 2014
D.C. or A.C. Controlgears for LED Performance Requirements IEC/EN62384, 1st-Edition+A1:2009
Safety of Low-Voltage Equipment (EAC) TP TC 004/020, 2011
EMC
Limits and methods of measurement of radio disturbance characteristics of electrical lighting EN55015:2013, A1:2015
Equipment for general Lighting Purpose EMC Immunity Requirements EN61547:2009
ESD Electrostatic discharge immunity test Air: ±8kV; Contact: ±4kV IEC61000-4-2: 2008, Criteria B
Radiated, radio-frequency, electromagnetic field immunity test 3V/m IEC61000-4-3:2006+A1:2007, Criteria A
Voltage Dips and Interruptions Voltage Dips: >95% IEC61000-4-11:2004, Criteria B
Voltage Dips: 30% IEC61000-4-11:2004, Criteria C
Limits of Harmonic Current Emissions EN61000-3-2:2014
Voltage Fluctuations and Flicker in Public Low-Voltage Systems <=16A per phase EN61000-3-3:2013
Telecommunication Part 18 - Industrial, Scientific and Medical Equipment FCC47 CFR Part 18, Class A
Design Lifetime 25°C ambient >20 x 10³ hours in operation
Connections (please refer to „Package Style and Pinning“) AC Input Live Brown Wire, AWG18, 215mm + 6mm stripped and tinned
AC Input Neutral Blue Wire, AWG18, 215mm + 6mm stripped and tinned
LED + Red Wire, AWG18, 215mm + 10mm stripped and tinned
LED - Black Wire, AWG18, 215mm + 10mm stripped and tinned
Specifications (typical at 25°C and after warm up time unless otherwise specified )
2 Mounting screws are included
Tc = Case Temperature Measuring Point
Constant Current (CC) and Constant Voltage (CV) Graph
Maximum Number of LED drivers
per circuit breakers
Characteristics
Note:
All LED Drivers may not be used without a load. They must be switched on the primary side only. Noncompliance may damage the LED or reduce its lifetime.
Condition Circuit Breaker Circuit Breaker Current
Typ 10A 16A 20A 25A
115VAC, 1Ohm
90° phase angle C221 247 337 430
230VAC, 1Ohm
90° phase angle
B80 157 200 254
C265 317 437 550
L-20 www.recom-power.comREV: 2/2017
The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit
written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer
shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.
