DATA SH EET
Product data sheet
Supersedes data of 1999 May 11 2003 Mar 25
DISCRETE SEMICONDUCTORS
BAV170
Low-leakage double diode
bo
ok, halfpage
M3D088
2003 Mar 25 2
NXP Semiconductors Product data sheet
Low-leakage double diode BAV170
FEATURES
Plastic SMD package
Low leakage current: typ. 3 pA
Switching time: typ. 0.8 µs
Continuous reverse voltage:
max. 75 V
Repetitive peak reverse voltage:
max. 85 V
Repetitive peak fo rward current:
max. 500 mA.
APPLICATION
Low-leakage current applications in
surface mounted circuits.
DESCRIPTION
Epitaxial, medium-speed switching,
double diode in a small SOT23 plastic
SMD package. The diodes are in
common cathode con fig uration.
PINNING
PIN DESCRIPTION
1anode
2anode
3common cathode
Fig.1 Simplified outline (SOT23 ) and symbo l .
handbook, 4 columns 21
3
Top view
MAM108
21
3
MARKING
Note
1. = p : Made in Hong Kong.
= t : Made in Malaysia.
= W : Made in China.
TYPE NUMBER MARKING
CODE(1)
BAV170 JX*
2003 Mar 25 3
NXP Semiconductors Pr oduct data sheet
Low-leakage double diode BAV170
LIMITING VALUES
In accordance with the Absolute Maximum Ratin g S ystem (IEC 60134).
Note
1. Device mounted o n a FR4 printed-circuit board.
ELECTRICAL CHARACTERISTIC S
Tj = 25 °C unless otherwise specified.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
Per diode
VRRM repetitive peak reverse voltage 85 V
VRcontinuous revers e voltage 75 V
IFcontinuous forward current single diode loaded; note 1;
see Fig.2 215 mA
double diode loaded; note 1;
see Fig.2 125 mA
IFRM repetitive peak forward current 500 mA
IFSM non-repetitive peak forward current square wave; Tj = 25 °C prior to
surge; see Fig.4
tp = 1 µs4 A
tp = 1 ms 1 A
tp = 1 s 0.5 A
Ptot total power dissipation Tamb = 25 °C; note 1 250 mW
Tstg storage temperature 65 +150 °C
Tjjunction temperature 150 °C
SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT
Per diode
VFforward voltage see Fig.3
IF = 1 mA 900 mV
IF = 10 mA 1 000 mV
IF = 50 mA 1 100 mV
IF = 150 mA 1 250 mV
IRreverse current see Fig.5
VR = 75 V 0.003 5nA
VR = 75 V; Tj = 150 °C 3 80 nA
Cddiode capacit an ce f = 1 MHz; VR = 0; see Fig.6 2pF
trr reverse recove ry time when switched from IF = 10 mA to
IR = 10 mA; RL = 100 ; measured at
IR = 1 mA; see Fig.7
0.8 3µs
2003 Mar 25 4
NXP Semiconductors Pr oduct data sheet
Low-leakage double diode BAV170
THERMAL CHARACTE RISTICS
Note
1. Device mounted o n a FR4 printed-circuit board.
SYMBOL PARAMETER CONDITIONS VALUE UNIT
Rth j-tp thermal resistance from junction to tie-point 360 K/W
Rth j-a thermal resistance from junction to ambient note 1 500 K/W
GRAPHICAL DATA
Device moun ted on a FR4 printed-circuit board.
(1) Single diode loaded.
(2) Double diode loaded.
Fig.2 Maximum permissible continuous forward
current as a func tion of ambient
temperature.
handbook, halfpage
0 100
IF
(mA)
200
300
0
100
200
MBG521
Tamb (oC)
(1)
(2)
Fig.3 Forward current as a function of forward
voltage; per diode.
handbook, halfpage
0 1.6
300
0
100
200
MLB752 - 1
0.8 1.20.4
IF
(mA)
V (V)
F
(1) (2) (3)
(1) Tj = 150 °C; typical values.
(2) Tj = 25 °C; typical values.
(3) Tj = 25 °C; maximum values.
2003 Mar 25 5
NXP Semiconductors Pr oduct data sheet
Low-leakage double diode BAV170
Fig.4 Maximum permissible non-repetitive peak forward current as a function of pulse duration per diode.
Based on square wave currents; Tj = 25 °C prior to surge.
handbook, full pagewidth
MBG704
10 tp (µs)
1
IFSM
(A)
102
101104
102103
10
1
VR = 75 V.
(1) Maximum values.
(2) Typical values.
Fig.5 Reverse current as a fun ction of junc tion
temperature; per diode.
h
andbook, halfpage
10
2
10
3
150 200
500
MLB754
100
10
1
10
1
10
2
IR
(nA)
T ( C)
o
j
(1)
(2)
Fig.6 Diode capacitance as a function of reverse
voltage; per diode; typical values.
f = 1 MHz; Tj = 25 °C.
handbook, halfpage
01020155
2
0
1
MBG526
V
R
(V)
Cd
(pF)
2003 Mar 25 6
NXP Semiconductors Pr oduct data sheet
Low-leakage double diode BAV170
handbook, full pagewidth
trr
(1)
IFt
output signal
trt
tp
10%
90%
VR
input signal
V = V I x R
RF S
R = 50
SIF
D.U.T.
R = 50
i
SAMPLING
OSCILLOSCOPE
MGA881
Fig.7 Reverse reco very time test circuit and waveforms.
2003 Mar 25 7
NXP Semiconductors Pr oduct data sheet
Low-leakage double diode BAV170
PACKAGE OUTLINE
UNIT A1
max. bpcDE e1HELpQwv
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
97-02-28
99-09-13
IEC JEDEC EIAJ
mm 0.1 0.48
0.38 0.15
0.09 3.0
2.8 1.4
1.2 0.95
e
1.9 2.5
2.1 0.55
0.45 0.1
0.2
DIMENSIONS (mm are the original dimensions)
0.45
0.15
SOT23 TO-236AB
bp
D
e1
e
A
A1
Lp
Q
detail X
HE
E
wM
vMA
B
AB
0 1 2 mm
scale
A
1.1
0.9
c
X
12
3
Plastic surface mounted package; 3 leads SOT2
3
2003 Mar 25 8
NXP Semiconductors Pr oduct data sheet
Low-leakage double diode BAV170
DATA SHEET STATUS
Notes
1. Please consult the most recently issued document befor e initiating or completing a design.
2. The product s ta tus of device(s) described in this do cument may have ch anged since this document was published
and may differ in case of multiple devices. The latest product status information is available on the Internet at
URL http://www.nxp.com.
DOCUMENT
STATUS(1) PRODUCT
STATUS(2) DEFINITION
Objective data sheet Development This document contains data from the objective specification for pro duct
development.
Preliminary data sheet Qualification This document contains data from the preliminary specification.
Product data sheet Production T his document contains the produc t specification.
DISCLAIMERS
General Information in this document is believed to be
accurate and reliable . H ow ev er, NXP Semiconductors
does not give any representations or warranties,
expressed or implied, as to the accuracy or completeness
of such information and shall have no liability for the
consequenc es of use of such informa tion.
Right to make changes NXP Semiconductors
reserves the right to make changes to information
published in this doc ument, including without limitation
specifications and product descriptions, at any time and
without notice. This document supersedes and replaces all
information supplied prior to the publication hereo f.
Suitability for use NXP Semiconductors products are
not designed, au thorized or warranted to be suitable for
use in medical, military, aircraft, space or life support
equipment, nor in applications where failure or malfunction
of an NXP Semiconductors product can reasonably be
expected to result in pe rs onal injury, death or seve re
property or environmental damage. NXP Semiconductors
accepts no liability for inclusion and/or use of NXP
Semiconductors products in such equipment or
applications and therefor e s uc h inclusion and/or use is at
the customer’s own risk .
Applications Applications that are described herein for
any of these products are for illustrative purposes only.
NXP Semiconductors makes no representation or
warranty that such applications will be suitable for the
specified use witho ut fu rth e r testing or modificati on .
Limiting values Stress abov e on e or more limit ing
values (as defined in the Absolute Maximum Ratings
System of IEC 60134) may cause permanent damage to
the device. Limiting values a re s t ress ratings only and
operation of the device at these or an y other conditions
above those given in the Characteristics sections of this
document is not implied. Exposure to limiting values for
extended periods may affect device reliability.
Terms and conditions of sale NXP Semiconductors
products are sold subject to the general terms and
conditions of commercial sale, as published at
http://www.nxp.com/profile/terms, including those
pertaining to warranty, intellectual property rights
infringement and limitation of liability, unless explicitly
otherwise agreed to in writing by NXP Semiconductors. In
case of any incons istency or conflict between information
in this document an d such terms and conditio ns, the latter
will prevail.
No offer to sell or license Nothing in this document
may be interpreted or construed as an offer to sell products
that is open for accept ance or the grant, c onv eyance or
implication of any license under any copyrights, patents or
other industr i al or inte llectual property righ ts.
Export control This document as well as the item(s)
described herein may be subject to export control
regulations. Export might require a prior authorization from
national author ities.
Quick refer ence data The Quick reference data is an
extract of th e product data given in the Limiting values and
Characteristics sections of this document, and as such is
not complete, exhaus tive or legally binding.
NXP Semiconductors
Contact information
For additional information p lease visit: http://www.nxp.com
For sales offices addresses send e-mail to: salesaddresses@nxp.com
© NXP B.V. 2009
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information pr e sent ed in this documen t d oes not fo rm p ar t o f an y q uotation or contra ct, is b elieve d t o b e a ccur ate a nd re li a ble and may be chan ged
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual pr operty righ ts.
Customer notification
This data sheet was changed to reflect the new company name NXP Semicon ductors. No changes were
made to the content, except for the legal definitions and disclaimer s.
Printed in The Netherlands 613514/04/pp Date of release: 2003 Mar 25 Docum ent order number: 9397 750 10965